Keerthy | 994aae3 | 2016-05-10 09:34:39 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Regulator driver for LP873X PMIC |
| 3 | * |
| 4 | * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or |
| 7 | * modify it under the terms of the GNU General Public License version 2 as |
| 8 | * published by the Free Software Foundation. |
| 9 | * |
| 10 | * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| 11 | * kind, whether expressed or implied; without even the implied warranty |
| 12 | * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 | * GNU General Public License version 2 for more details. |
| 14 | */ |
| 15 | |
| 16 | #include <linux/module.h> |
| 17 | #include <linux/platform_device.h> |
| 18 | #include <linux/regmap.h> |
| 19 | |
| 20 | #include <linux/mfd/lp873x.h> |
| 21 | |
| 22 | #define LP873X_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \ |
| 23 | _delay, _lr, _nlr, _cr) \ |
| 24 | [_id] = { \ |
| 25 | .desc = { \ |
| 26 | .name = _name, \ |
| 27 | .id = _id, \ |
| 28 | .of_match = of_match_ptr(_of), \ |
| 29 | .regulators_node = of_match_ptr("regulators"),\ |
| 30 | .ops = &_ops, \ |
| 31 | .n_voltages = _n, \ |
| 32 | .type = REGULATOR_VOLTAGE, \ |
| 33 | .owner = THIS_MODULE, \ |
| 34 | .vsel_reg = _vr, \ |
| 35 | .vsel_mask = _vm, \ |
| 36 | .enable_reg = _er, \ |
| 37 | .enable_mask = _em, \ |
| 38 | .ramp_delay = _delay, \ |
| 39 | .linear_ranges = _lr, \ |
| 40 | .n_linear_ranges = _nlr, \ |
| 41 | }, \ |
| 42 | .ctrl2_reg = _cr, \ |
| 43 | } |
| 44 | |
| 45 | struct lp873x_regulator { |
| 46 | struct regulator_desc desc; |
| 47 | unsigned int ctrl2_reg; |
| 48 | }; |
| 49 | |
| 50 | static const struct lp873x_regulator regulators[]; |
| 51 | |
| 52 | static const struct regulator_linear_range buck0_buck1_ranges[] = { |
| 53 | REGULATOR_LINEAR_RANGE(0, 0x0, 0x13, 0), |
| 54 | REGULATOR_LINEAR_RANGE(700000, 0x14, 0x17, 10000), |
| 55 | REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000), |
| 56 | REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000), |
| 57 | }; |
| 58 | |
| 59 | static const struct regulator_linear_range ldo0_ldo1_ranges[] = { |
| 60 | REGULATOR_LINEAR_RANGE(800000, 0x0, 0x19, 100000), |
| 61 | }; |
| 62 | |
| 63 | static unsigned int lp873x_buck_ramp_delay[] = { |
| 64 | 30000, 15000, 10000, 7500, 3800, 1900, 940, 470 |
| 65 | }; |
| 66 | |
| 67 | /* LP873X BUCK current limit */ |
| 68 | static const unsigned int lp873x_buck_uA[] = { |
| 69 | 1500000, 2000000, 2500000, 3000000, 3500000, 4000000, |
| 70 | }; |
| 71 | |
| 72 | static int lp873x_buck_set_ramp_delay(struct regulator_dev *rdev, |
| 73 | int ramp_delay) |
| 74 | { |
| 75 | int id = rdev_get_id(rdev); |
| 76 | struct lp873x *lp873 = rdev_get_drvdata(rdev); |
| 77 | unsigned int reg; |
| 78 | int ret; |
| 79 | |
| 80 | if (ramp_delay <= 470) |
| 81 | reg = 7; |
| 82 | else if (ramp_delay <= 940) |
| 83 | reg = 6; |
| 84 | else if (ramp_delay <= 1900) |
| 85 | reg = 5; |
| 86 | else if (ramp_delay <= 3800) |
| 87 | reg = 4; |
| 88 | else if (ramp_delay <= 7500) |
| 89 | reg = 3; |
| 90 | else if (ramp_delay <= 10000) |
| 91 | reg = 2; |
| 92 | else if (ramp_delay <= 15000) |
| 93 | reg = 1; |
| 94 | else |
| 95 | reg = 0; |
| 96 | |
| 97 | ret = regmap_update_bits(lp873->regmap, regulators[id].ctrl2_reg, |
| 98 | LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE, |
| 99 | reg << __ffs(LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE)); |
| 100 | if (ret) { |
| 101 | dev_err(lp873->dev, "SLEW RATE write failed: %d\n", ret); |
| 102 | return ret; |
| 103 | } |
| 104 | |
| 105 | rdev->constraints->ramp_delay = lp873x_buck_ramp_delay[reg]; |
| 106 | |
| 107 | return 0; |
| 108 | } |
| 109 | |
| 110 | static int lp873x_buck_set_current_limit(struct regulator_dev *rdev, |
| 111 | int min_uA, int max_uA) |
| 112 | { |
| 113 | int id = rdev_get_id(rdev); |
| 114 | struct lp873x *lp873 = rdev_get_drvdata(rdev); |
| 115 | int i; |
| 116 | |
| 117 | for (i = ARRAY_SIZE(lp873x_buck_uA) - 1; i >= 0; i--) { |
| 118 | if (lp873x_buck_uA[i] >= min_uA && |
| 119 | lp873x_buck_uA[i] <= max_uA) |
| 120 | return regmap_update_bits(lp873->regmap, |
| 121 | regulators[id].ctrl2_reg, |
| 122 | LP873X_BUCK0_CTRL_2_BUCK0_ILIM, |
| 123 | i << __ffs(LP873X_BUCK0_CTRL_2_BUCK0_ILIM)); |
| 124 | } |
| 125 | |
| 126 | return -EINVAL; |
| 127 | } |
| 128 | |
| 129 | static int lp873x_buck_get_current_limit(struct regulator_dev *rdev) |
| 130 | { |
| 131 | int id = rdev_get_id(rdev); |
| 132 | struct lp873x *lp873 = rdev_get_drvdata(rdev); |
| 133 | int ret; |
| 134 | unsigned int val; |
| 135 | |
| 136 | ret = regmap_read(lp873->regmap, regulators[id].ctrl2_reg, &val); |
| 137 | if (ret) |
| 138 | return ret; |
| 139 | |
| 140 | val = (val & LP873X_BUCK0_CTRL_2_BUCK0_ILIM) >> |
| 141 | __ffs(LP873X_BUCK0_CTRL_2_BUCK0_ILIM); |
| 142 | |
| 143 | return (val < ARRAY_SIZE(lp873x_buck_uA)) ? |
| 144 | lp873x_buck_uA[val] : -EINVAL; |
| 145 | } |
| 146 | |
| 147 | /* Operations permitted on BUCK0, BUCK1 */ |
| 148 | static struct regulator_ops lp873x_buck01_ops = { |
| 149 | .is_enabled = regulator_is_enabled_regmap, |
| 150 | .enable = regulator_enable_regmap, |
| 151 | .disable = regulator_disable_regmap, |
| 152 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 153 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 154 | .list_voltage = regulator_list_voltage_linear_range, |
| 155 | .map_voltage = regulator_map_voltage_linear_range, |
| 156 | .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| 157 | .set_ramp_delay = lp873x_buck_set_ramp_delay, |
| 158 | .set_current_limit = lp873x_buck_set_current_limit, |
| 159 | .get_current_limit = lp873x_buck_get_current_limit, |
| 160 | }; |
| 161 | |
| 162 | /* Operations permitted on LDO0 and LDO1 */ |
| 163 | static struct regulator_ops lp873x_ldo01_ops = { |
| 164 | .is_enabled = regulator_is_enabled_regmap, |
| 165 | .enable = regulator_enable_regmap, |
| 166 | .disable = regulator_disable_regmap, |
| 167 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 168 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 169 | .list_voltage = regulator_list_voltage_linear_range, |
| 170 | .map_voltage = regulator_map_voltage_linear_range, |
| 171 | }; |
| 172 | |
| 173 | static const struct lp873x_regulator regulators[] = { |
| 174 | LP873X_REGULATOR("BUCK0", LP873X_BUCK_0, "buck0", lp873x_buck01_ops, |
| 175 | 256, LP873X_REG_BUCK0_VOUT, |
| 176 | LP873X_BUCK0_VOUT_BUCK0_VSET, LP873X_REG_BUCK0_CTRL_1, |
| 177 | LP873X_BUCK0_CTRL_1_BUCK0_EN, 10000, |
| 178 | buck0_buck1_ranges, 4, LP873X_REG_BUCK0_CTRL_2), |
| 179 | LP873X_REGULATOR("BUCK1", LP873X_BUCK_1, "buck1", lp873x_buck01_ops, |
| 180 | 256, LP873X_REG_BUCK1_VOUT, |
| 181 | LP873X_BUCK1_VOUT_BUCK1_VSET, LP873X_REG_BUCK1_CTRL_1, |
| 182 | LP873X_BUCK1_CTRL_1_BUCK1_EN, 10000, |
| 183 | buck0_buck1_ranges, 4, LP873X_REG_BUCK1_CTRL_2), |
| 184 | LP873X_REGULATOR("LDO0", LP873X_LDO_0, "ldo0", lp873x_ldo01_ops, 26, |
| 185 | LP873X_REG_LDO0_VOUT, LP873X_LDO0_VOUT_LDO0_VSET, |
| 186 | LP873X_REG_LDO0_CTRL, |
| 187 | LP873X_LDO0_CTRL_LDO0_EN, 0, ldo0_ldo1_ranges, 1, |
| 188 | 0xFF), |
| 189 | LP873X_REGULATOR("LDO1", LP873X_LDO_1, "ldo1", lp873x_ldo01_ops, 26, |
| 190 | LP873X_REG_LDO1_VOUT, LP873X_LDO1_VOUT_LDO1_VSET, |
| 191 | LP873X_REG_LDO1_CTRL, |
| 192 | LP873X_LDO1_CTRL_LDO1_EN, 0, ldo0_ldo1_ranges, 1, |
| 193 | 0xFF), |
| 194 | }; |
| 195 | |
| 196 | static int lp873x_regulator_probe(struct platform_device *pdev) |
| 197 | { |
| 198 | struct lp873x *lp873 = dev_get_drvdata(pdev->dev.parent); |
| 199 | struct regulator_config config = { }; |
| 200 | struct regulator_dev *rdev; |
| 201 | int i; |
| 202 | |
| 203 | platform_set_drvdata(pdev, lp873); |
| 204 | |
| 205 | config.dev = &pdev->dev; |
| 206 | config.dev->of_node = lp873->dev->of_node; |
| 207 | config.driver_data = lp873; |
| 208 | config.regmap = lp873->regmap; |
| 209 | |
| 210 | for (i = 0; i < ARRAY_SIZE(regulators); i++) { |
| 211 | rdev = devm_regulator_register(&pdev->dev, ®ulators[i].desc, |
| 212 | &config); |
| 213 | if (IS_ERR(rdev)) { |
| 214 | dev_err(lp873->dev, "failed to register %s regulator\n", |
| 215 | pdev->name); |
| 216 | return PTR_ERR(rdev); |
| 217 | } |
| 218 | } |
| 219 | |
| 220 | return 0; |
| 221 | } |
| 222 | |
| 223 | static const struct platform_device_id lp873x_regulator_id_table[] = { |
| 224 | { "lp873x-regulator", }, |
| 225 | { /* sentinel */ } |
| 226 | }; |
| 227 | MODULE_DEVICE_TABLE(platform, lp873x_regulator_id_table); |
| 228 | |
| 229 | static struct platform_driver lp873x_regulator_driver = { |
| 230 | .driver = { |
| 231 | .name = "lp873x-pmic", |
| 232 | }, |
| 233 | .probe = lp873x_regulator_probe, |
| 234 | .id_table = lp873x_regulator_id_table, |
| 235 | }; |
| 236 | module_platform_driver(lp873x_regulator_driver); |
| 237 | |
| 238 | MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>"); |
| 239 | MODULE_DESCRIPTION("LP873X voltage regulator driver"); |
| 240 | MODULE_ALIAS("platform:lp873x-pmic"); |
| 241 | MODULE_LICENSE("GPL v2"); |