Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 1 | /* |
| 2 | * emc6w201.c - Hardware monitoring driver for the SMSC EMC6W201 |
| 3 | * Copyright (C) 2011 Jean Delvare <khali@linux-fr.org> |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or modify |
| 6 | * it under the terms of the GNU General Public License as published by |
| 7 | * the Free Software Foundation; either version 2 of the License, or |
| 8 | * (at your option) any later version. |
| 9 | * |
| 10 | * This program is distributed in the hope that it will be useful, |
| 11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 | * GNU General Public License for more details. |
| 14 | * |
| 15 | * You should have received a copy of the GNU General Public License |
| 16 | * along with this program; if not, write to the Free Software |
| 17 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 18 | */ |
| 19 | |
| 20 | #include <linux/module.h> |
| 21 | #include <linux/delay.h> |
| 22 | #include <linux/init.h> |
| 23 | #include <linux/slab.h> |
| 24 | #include <linux/jiffies.h> |
| 25 | #include <linux/i2c.h> |
| 26 | #include <linux/hwmon.h> |
| 27 | #include <linux/hwmon-sysfs.h> |
| 28 | #include <linux/err.h> |
| 29 | #include <linux/mutex.h> |
| 30 | |
| 31 | /* |
| 32 | * Addresses to scan |
| 33 | */ |
| 34 | |
| 35 | static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; |
| 36 | |
| 37 | /* |
| 38 | * The EMC6W201 registers |
| 39 | */ |
| 40 | |
| 41 | #define EMC6W201_REG_IN(nr) (0x20 + (nr)) |
| 42 | #define EMC6W201_REG_TEMP(nr) (0x26 + (nr)) |
| 43 | #define EMC6W201_REG_FAN(nr) (0x2C + (nr) * 2) |
| 44 | #define EMC6W201_REG_COMPANY 0x3E |
| 45 | #define EMC6W201_REG_VERSTEP 0x3F |
| 46 | #define EMC6W201_REG_CONFIG 0x40 |
| 47 | #define EMC6W201_REG_IN_LOW(nr) (0x4A + (nr) * 2) |
| 48 | #define EMC6W201_REG_IN_HIGH(nr) (0x4B + (nr) * 2) |
| 49 | #define EMC6W201_REG_TEMP_LOW(nr) (0x56 + (nr) * 2) |
| 50 | #define EMC6W201_REG_TEMP_HIGH(nr) (0x57 + (nr) * 2) |
| 51 | #define EMC6W201_REG_FAN_MIN(nr) (0x62 + (nr) * 2) |
| 52 | |
| 53 | enum { input, min, max } subfeature; |
| 54 | |
| 55 | /* |
| 56 | * Per-device data |
| 57 | */ |
| 58 | |
| 59 | struct emc6w201_data { |
| 60 | struct device *hwmon_dev; |
| 61 | struct mutex update_lock; |
| 62 | char valid; /* zero until following fields are valid */ |
| 63 | unsigned long last_updated; /* in jiffies */ |
| 64 | |
| 65 | /* registers values */ |
| 66 | u8 in[3][6]; |
| 67 | s8 temp[3][6]; |
| 68 | u16 fan[2][5]; |
| 69 | }; |
| 70 | |
| 71 | /* |
| 72 | * Combine LSB and MSB registers in a single value |
| 73 | * Locking: must be called with data->update_lock held |
| 74 | */ |
| 75 | static u16 emc6w201_read16(struct i2c_client *client, u8 reg) |
| 76 | { |
| 77 | int lsb, msb; |
| 78 | |
| 79 | lsb = i2c_smbus_read_byte_data(client, reg); |
| 80 | msb = i2c_smbus_read_byte_data(client, reg + 1); |
Jean Delvare | b6b2a1e | 2011-07-03 13:32:53 +0200 | [diff] [blame] | 81 | if (unlikely(lsb < 0 || msb < 0)) { |
| 82 | dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", |
| 83 | 16, "read", reg); |
Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 84 | return 0xFFFF; /* Arbitrary value */ |
| 85 | } |
| 86 | |
| 87 | return (msb << 8) | lsb; |
| 88 | } |
| 89 | |
| 90 | /* |
| 91 | * Write 16-bit value to LSB and MSB registers |
| 92 | * Locking: must be called with data->update_lock held |
| 93 | */ |
| 94 | static int emc6w201_write16(struct i2c_client *client, u8 reg, u16 val) |
| 95 | { |
| 96 | int err; |
| 97 | |
| 98 | err = i2c_smbus_write_byte_data(client, reg, val & 0xff); |
Jean Delvare | b6b2a1e | 2011-07-03 13:32:53 +0200 | [diff] [blame] | 99 | if (likely(!err)) |
Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 100 | err = i2c_smbus_write_byte_data(client, reg + 1, val >> 8); |
Jean Delvare | b6b2a1e | 2011-07-03 13:32:53 +0200 | [diff] [blame] | 101 | if (unlikely(err < 0)) |
| 102 | dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", |
| 103 | 16, "write", reg); |
| 104 | |
| 105 | return err; |
| 106 | } |
| 107 | |
| 108 | /* Read 8-bit value from register */ |
| 109 | static u8 emc6w201_read8(struct i2c_client *client, u8 reg) |
| 110 | { |
| 111 | int val; |
| 112 | |
| 113 | val = i2c_smbus_read_byte_data(client, reg); |
| 114 | if (unlikely(val < 0)) { |
| 115 | dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", |
| 116 | 8, "read", reg); |
| 117 | return 0x00; /* Arbitrary value */ |
| 118 | } |
| 119 | |
| 120 | return val; |
| 121 | } |
| 122 | |
| 123 | /* Write 8-bit value to register */ |
| 124 | static int emc6w201_write8(struct i2c_client *client, u8 reg, u8 val) |
| 125 | { |
| 126 | int err; |
| 127 | |
| 128 | err = i2c_smbus_write_byte_data(client, reg, val); |
| 129 | if (unlikely(err < 0)) |
| 130 | dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", |
| 131 | 8, "write", reg); |
Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 132 | |
| 133 | return err; |
| 134 | } |
| 135 | |
| 136 | static struct emc6w201_data *emc6w201_update_device(struct device *dev) |
| 137 | { |
| 138 | struct i2c_client *client = to_i2c_client(dev); |
| 139 | struct emc6w201_data *data = i2c_get_clientdata(client); |
| 140 | int nr; |
| 141 | |
| 142 | mutex_lock(&data->update_lock); |
| 143 | |
| 144 | if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { |
| 145 | for (nr = 0; nr < 6; nr++) { |
| 146 | data->in[input][nr] = |
Jean Delvare | b6b2a1e | 2011-07-03 13:32:53 +0200 | [diff] [blame] | 147 | emc6w201_read8(client, |
Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 148 | EMC6W201_REG_IN(nr)); |
| 149 | data->in[min][nr] = |
Jean Delvare | b6b2a1e | 2011-07-03 13:32:53 +0200 | [diff] [blame] | 150 | emc6w201_read8(client, |
Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 151 | EMC6W201_REG_IN_LOW(nr)); |
| 152 | data->in[max][nr] = |
Jean Delvare | b6b2a1e | 2011-07-03 13:32:53 +0200 | [diff] [blame] | 153 | emc6w201_read8(client, |
Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 154 | EMC6W201_REG_IN_HIGH(nr)); |
| 155 | } |
| 156 | |
| 157 | for (nr = 0; nr < 6; nr++) { |
| 158 | data->temp[input][nr] = |
Jean Delvare | b6b2a1e | 2011-07-03 13:32:53 +0200 | [diff] [blame] | 159 | emc6w201_read8(client, |
Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 160 | EMC6W201_REG_TEMP(nr)); |
| 161 | data->temp[min][nr] = |
Jean Delvare | b6b2a1e | 2011-07-03 13:32:53 +0200 | [diff] [blame] | 162 | emc6w201_read8(client, |
Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 163 | EMC6W201_REG_TEMP_LOW(nr)); |
| 164 | data->temp[max][nr] = |
Jean Delvare | b6b2a1e | 2011-07-03 13:32:53 +0200 | [diff] [blame] | 165 | emc6w201_read8(client, |
Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 166 | EMC6W201_REG_TEMP_HIGH(nr)); |
| 167 | } |
| 168 | |
| 169 | for (nr = 0; nr < 5; nr++) { |
| 170 | data->fan[input][nr] = |
| 171 | emc6w201_read16(client, |
| 172 | EMC6W201_REG_FAN(nr)); |
| 173 | data->fan[min][nr] = |
| 174 | emc6w201_read16(client, |
| 175 | EMC6W201_REG_FAN_MIN(nr)); |
| 176 | } |
| 177 | |
| 178 | data->last_updated = jiffies; |
| 179 | data->valid = 1; |
| 180 | } |
| 181 | |
| 182 | mutex_unlock(&data->update_lock); |
| 183 | |
| 184 | return data; |
| 185 | } |
| 186 | |
| 187 | /* |
| 188 | * Sysfs callback functions |
| 189 | */ |
| 190 | |
| 191 | static const u16 nominal_mv[6] = { 2500, 1500, 3300, 5000, 1500, 1500 }; |
| 192 | |
| 193 | static ssize_t show_in(struct device *dev, struct device_attribute *devattr, |
| 194 | char *buf) |
| 195 | { |
| 196 | struct emc6w201_data *data = emc6w201_update_device(dev); |
| 197 | int sf = to_sensor_dev_attr_2(devattr)->index; |
| 198 | int nr = to_sensor_dev_attr_2(devattr)->nr; |
| 199 | |
| 200 | return sprintf(buf, "%u\n", |
| 201 | (unsigned)data->in[sf][nr] * nominal_mv[nr] / 0xC0); |
| 202 | } |
| 203 | |
| 204 | static ssize_t set_in(struct device *dev, struct device_attribute *devattr, |
| 205 | const char *buf, size_t count) |
| 206 | { |
| 207 | struct i2c_client *client = to_i2c_client(dev); |
| 208 | struct emc6w201_data *data = i2c_get_clientdata(client); |
| 209 | int sf = to_sensor_dev_attr_2(devattr)->index; |
| 210 | int nr = to_sensor_dev_attr_2(devattr)->nr; |
| 211 | int err; |
| 212 | long val; |
| 213 | u8 reg; |
| 214 | |
Frans Meulenbroeks | 179c4fd | 2012-01-04 20:58:52 +0100 | [diff] [blame] | 215 | err = kstrtol(buf, 10, &val); |
Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 216 | if (err < 0) |
| 217 | return err; |
| 218 | |
| 219 | val = DIV_ROUND_CLOSEST(val * 0xC0, nominal_mv[nr]); |
| 220 | reg = (sf == min) ? EMC6W201_REG_IN_LOW(nr) |
| 221 | : EMC6W201_REG_IN_HIGH(nr); |
| 222 | |
| 223 | mutex_lock(&data->update_lock); |
| 224 | data->in[sf][nr] = SENSORS_LIMIT(val, 0, 255); |
Jean Delvare | b6b2a1e | 2011-07-03 13:32:53 +0200 | [diff] [blame] | 225 | err = emc6w201_write8(client, reg, data->in[sf][nr]); |
Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 226 | mutex_unlock(&data->update_lock); |
| 227 | |
| 228 | return err < 0 ? err : count; |
| 229 | } |
| 230 | |
| 231 | static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, |
| 232 | char *buf) |
| 233 | { |
| 234 | struct emc6w201_data *data = emc6w201_update_device(dev); |
| 235 | int sf = to_sensor_dev_attr_2(devattr)->index; |
| 236 | int nr = to_sensor_dev_attr_2(devattr)->nr; |
| 237 | |
| 238 | return sprintf(buf, "%d\n", (int)data->temp[sf][nr] * 1000); |
| 239 | } |
| 240 | |
| 241 | static ssize_t set_temp(struct device *dev, struct device_attribute *devattr, |
| 242 | const char *buf, size_t count) |
| 243 | { |
| 244 | struct i2c_client *client = to_i2c_client(dev); |
| 245 | struct emc6w201_data *data = i2c_get_clientdata(client); |
| 246 | int sf = to_sensor_dev_attr_2(devattr)->index; |
| 247 | int nr = to_sensor_dev_attr_2(devattr)->nr; |
| 248 | int err; |
| 249 | long val; |
| 250 | u8 reg; |
| 251 | |
Frans Meulenbroeks | 179c4fd | 2012-01-04 20:58:52 +0100 | [diff] [blame] | 252 | err = kstrtol(buf, 10, &val); |
Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 253 | if (err < 0) |
| 254 | return err; |
| 255 | |
| 256 | val /= 1000; |
| 257 | reg = (sf == min) ? EMC6W201_REG_TEMP_LOW(nr) |
| 258 | : EMC6W201_REG_TEMP_HIGH(nr); |
| 259 | |
| 260 | mutex_lock(&data->update_lock); |
| 261 | data->temp[sf][nr] = SENSORS_LIMIT(val, -127, 128); |
Jean Delvare | b6b2a1e | 2011-07-03 13:32:53 +0200 | [diff] [blame] | 262 | err = emc6w201_write8(client, reg, data->temp[sf][nr]); |
Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 263 | mutex_unlock(&data->update_lock); |
| 264 | |
| 265 | return err < 0 ? err : count; |
| 266 | } |
| 267 | |
| 268 | static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, |
| 269 | char *buf) |
| 270 | { |
| 271 | struct emc6w201_data *data = emc6w201_update_device(dev); |
| 272 | int sf = to_sensor_dev_attr_2(devattr)->index; |
| 273 | int nr = to_sensor_dev_attr_2(devattr)->nr; |
| 274 | unsigned rpm; |
| 275 | |
| 276 | if (data->fan[sf][nr] == 0 || data->fan[sf][nr] == 0xFFFF) |
| 277 | rpm = 0; |
| 278 | else |
| 279 | rpm = 5400000U / data->fan[sf][nr]; |
| 280 | |
| 281 | return sprintf(buf, "%u\n", rpm); |
| 282 | } |
| 283 | |
| 284 | static ssize_t set_fan(struct device *dev, struct device_attribute *devattr, |
| 285 | const char *buf, size_t count) |
| 286 | { |
| 287 | struct i2c_client *client = to_i2c_client(dev); |
| 288 | struct emc6w201_data *data = i2c_get_clientdata(client); |
| 289 | int sf = to_sensor_dev_attr_2(devattr)->index; |
| 290 | int nr = to_sensor_dev_attr_2(devattr)->nr; |
| 291 | int err; |
| 292 | unsigned long val; |
| 293 | |
Frans Meulenbroeks | 179c4fd | 2012-01-04 20:58:52 +0100 | [diff] [blame] | 294 | err = kstrtoul(buf, 10, &val); |
Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 295 | if (err < 0) |
| 296 | return err; |
| 297 | |
| 298 | if (val == 0) { |
| 299 | val = 0xFFFF; |
| 300 | } else { |
| 301 | val = DIV_ROUND_CLOSEST(5400000U, val); |
| 302 | val = SENSORS_LIMIT(val, 0, 0xFFFE); |
| 303 | } |
| 304 | |
| 305 | mutex_lock(&data->update_lock); |
| 306 | data->fan[sf][nr] = val; |
| 307 | err = emc6w201_write16(client, EMC6W201_REG_FAN_MIN(nr), |
| 308 | data->fan[sf][nr]); |
| 309 | mutex_unlock(&data->update_lock); |
| 310 | |
| 311 | return err < 0 ? err : count; |
| 312 | } |
| 313 | |
| 314 | static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, input); |
| 315 | static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_in, set_in, |
| 316 | 0, min); |
| 317 | static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_in, set_in, |
| 318 | 0, max); |
| 319 | static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 1, input); |
| 320 | static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_in, set_in, |
| 321 | 1, min); |
| 322 | static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_in, set_in, |
| 323 | 1, max); |
| 324 | static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 2, input); |
| 325 | static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_in, set_in, |
| 326 | 2, min); |
| 327 | static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_in, set_in, |
| 328 | 2, max); |
| 329 | static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 3, input); |
| 330 | static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_in, set_in, |
| 331 | 3, min); |
| 332 | static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_in, set_in, |
| 333 | 3, max); |
| 334 | static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 4, input); |
| 335 | static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_in, set_in, |
| 336 | 4, min); |
| 337 | static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_in, set_in, |
| 338 | 4, max); |
| 339 | static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 5, input); |
| 340 | static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_in, set_in, |
| 341 | 5, min); |
| 342 | static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_in, set_in, |
| 343 | 5, max); |
| 344 | |
| 345 | static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, input); |
| 346 | static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 347 | 0, min); |
| 348 | static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 349 | 0, max); |
| 350 | static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 1, input); |
| 351 | static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 352 | 1, min); |
| 353 | static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 354 | 1, max); |
| 355 | static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 2, input); |
| 356 | static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 357 | 2, min); |
| 358 | static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 359 | 2, max); |
| 360 | static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 3, input); |
| 361 | static SENSOR_DEVICE_ATTR_2(temp4_min, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 362 | 3, min); |
| 363 | static SENSOR_DEVICE_ATTR_2(temp4_max, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 364 | 3, max); |
| 365 | static SENSOR_DEVICE_ATTR_2(temp5_input, S_IRUGO, show_temp, NULL, 4, input); |
| 366 | static SENSOR_DEVICE_ATTR_2(temp5_min, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 367 | 4, min); |
| 368 | static SENSOR_DEVICE_ATTR_2(temp5_max, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 369 | 4, max); |
| 370 | static SENSOR_DEVICE_ATTR_2(temp6_input, S_IRUGO, show_temp, NULL, 5, input); |
| 371 | static SENSOR_DEVICE_ATTR_2(temp6_min, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 372 | 5, min); |
| 373 | static SENSOR_DEVICE_ATTR_2(temp6_max, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 374 | 5, max); |
| 375 | |
| 376 | static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, input); |
| 377 | static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_fan, set_fan, |
| 378 | 0, min); |
| 379 | static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 1, input); |
| 380 | static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_fan, set_fan, |
| 381 | 1, min); |
| 382 | static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 2, input); |
| 383 | static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_fan, set_fan, |
| 384 | 2, min); |
| 385 | static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 3, input); |
| 386 | static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_fan, set_fan, |
| 387 | 3, min); |
| 388 | static SENSOR_DEVICE_ATTR_2(fan5_input, S_IRUGO, show_fan, NULL, 4, input); |
| 389 | static SENSOR_DEVICE_ATTR_2(fan5_min, S_IRUGO | S_IWUSR, show_fan, set_fan, |
| 390 | 4, min); |
| 391 | |
| 392 | static struct attribute *emc6w201_attributes[] = { |
| 393 | &sensor_dev_attr_in0_input.dev_attr.attr, |
| 394 | &sensor_dev_attr_in0_min.dev_attr.attr, |
| 395 | &sensor_dev_attr_in0_max.dev_attr.attr, |
| 396 | &sensor_dev_attr_in1_input.dev_attr.attr, |
| 397 | &sensor_dev_attr_in1_min.dev_attr.attr, |
| 398 | &sensor_dev_attr_in1_max.dev_attr.attr, |
| 399 | &sensor_dev_attr_in2_input.dev_attr.attr, |
| 400 | &sensor_dev_attr_in2_min.dev_attr.attr, |
| 401 | &sensor_dev_attr_in2_max.dev_attr.attr, |
| 402 | &sensor_dev_attr_in3_input.dev_attr.attr, |
| 403 | &sensor_dev_attr_in3_min.dev_attr.attr, |
| 404 | &sensor_dev_attr_in3_max.dev_attr.attr, |
| 405 | &sensor_dev_attr_in4_input.dev_attr.attr, |
| 406 | &sensor_dev_attr_in4_min.dev_attr.attr, |
| 407 | &sensor_dev_attr_in4_max.dev_attr.attr, |
| 408 | &sensor_dev_attr_in5_input.dev_attr.attr, |
| 409 | &sensor_dev_attr_in5_min.dev_attr.attr, |
| 410 | &sensor_dev_attr_in5_max.dev_attr.attr, |
| 411 | |
| 412 | &sensor_dev_attr_temp1_input.dev_attr.attr, |
| 413 | &sensor_dev_attr_temp1_min.dev_attr.attr, |
| 414 | &sensor_dev_attr_temp1_max.dev_attr.attr, |
| 415 | &sensor_dev_attr_temp2_input.dev_attr.attr, |
| 416 | &sensor_dev_attr_temp2_min.dev_attr.attr, |
| 417 | &sensor_dev_attr_temp2_max.dev_attr.attr, |
| 418 | &sensor_dev_attr_temp3_input.dev_attr.attr, |
| 419 | &sensor_dev_attr_temp3_min.dev_attr.attr, |
| 420 | &sensor_dev_attr_temp3_max.dev_attr.attr, |
| 421 | &sensor_dev_attr_temp4_input.dev_attr.attr, |
| 422 | &sensor_dev_attr_temp4_min.dev_attr.attr, |
| 423 | &sensor_dev_attr_temp4_max.dev_attr.attr, |
| 424 | &sensor_dev_attr_temp5_input.dev_attr.attr, |
| 425 | &sensor_dev_attr_temp5_min.dev_attr.attr, |
| 426 | &sensor_dev_attr_temp5_max.dev_attr.attr, |
| 427 | &sensor_dev_attr_temp6_input.dev_attr.attr, |
| 428 | &sensor_dev_attr_temp6_min.dev_attr.attr, |
| 429 | &sensor_dev_attr_temp6_max.dev_attr.attr, |
| 430 | |
| 431 | &sensor_dev_attr_fan1_input.dev_attr.attr, |
| 432 | &sensor_dev_attr_fan1_min.dev_attr.attr, |
| 433 | &sensor_dev_attr_fan2_input.dev_attr.attr, |
| 434 | &sensor_dev_attr_fan2_min.dev_attr.attr, |
| 435 | &sensor_dev_attr_fan3_input.dev_attr.attr, |
| 436 | &sensor_dev_attr_fan3_min.dev_attr.attr, |
| 437 | &sensor_dev_attr_fan4_input.dev_attr.attr, |
| 438 | &sensor_dev_attr_fan4_min.dev_attr.attr, |
| 439 | &sensor_dev_attr_fan5_input.dev_attr.attr, |
| 440 | &sensor_dev_attr_fan5_min.dev_attr.attr, |
| 441 | NULL |
| 442 | }; |
| 443 | |
| 444 | static const struct attribute_group emc6w201_group = { |
| 445 | .attrs = emc6w201_attributes, |
| 446 | }; |
| 447 | |
| 448 | /* |
| 449 | * Driver interface |
| 450 | */ |
| 451 | |
| 452 | /* Return 0 if detection is successful, -ENODEV otherwise */ |
| 453 | static int emc6w201_detect(struct i2c_client *client, |
| 454 | struct i2c_board_info *info) |
| 455 | { |
| 456 | struct i2c_adapter *adapter = client->adapter; |
| 457 | int company, verstep, config; |
| 458 | |
| 459 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| 460 | return -ENODEV; |
| 461 | |
| 462 | /* Identification */ |
| 463 | company = i2c_smbus_read_byte_data(client, EMC6W201_REG_COMPANY); |
| 464 | if (company != 0x5C) |
| 465 | return -ENODEV; |
| 466 | verstep = i2c_smbus_read_byte_data(client, EMC6W201_REG_VERSTEP); |
| 467 | if (verstep < 0 || (verstep & 0xF0) != 0xB0) |
| 468 | return -ENODEV; |
| 469 | if ((verstep & 0x0F) > 2) { |
| 470 | dev_dbg(&client->dev, "Unknwown EMC6W201 stepping %d\n", |
| 471 | verstep & 0x0F); |
| 472 | return -ENODEV; |
| 473 | } |
| 474 | |
| 475 | /* Check configuration */ |
| 476 | config = i2c_smbus_read_byte_data(client, EMC6W201_REG_CONFIG); |
Jean Delvare | b6b2a1e | 2011-07-03 13:32:53 +0200 | [diff] [blame] | 477 | if (config < 0 || (config & 0xF4) != 0x04) |
Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 478 | return -ENODEV; |
| 479 | if (!(config & 0x01)) { |
| 480 | dev_err(&client->dev, "Monitoring not enabled\n"); |
| 481 | return -ENODEV; |
| 482 | } |
| 483 | |
| 484 | strlcpy(info->type, "emc6w201", I2C_NAME_SIZE); |
| 485 | |
| 486 | return 0; |
| 487 | } |
| 488 | |
| 489 | static int emc6w201_probe(struct i2c_client *client, |
| 490 | const struct i2c_device_id *id) |
| 491 | { |
| 492 | struct emc6w201_data *data; |
| 493 | int err; |
| 494 | |
| 495 | data = kzalloc(sizeof(struct emc6w201_data), GFP_KERNEL); |
| 496 | if (!data) { |
| 497 | err = -ENOMEM; |
| 498 | goto exit; |
| 499 | } |
| 500 | |
| 501 | i2c_set_clientdata(client, data); |
| 502 | mutex_init(&data->update_lock); |
| 503 | |
| 504 | /* Create sysfs attribute */ |
| 505 | err = sysfs_create_group(&client->dev.kobj, &emc6w201_group); |
| 506 | if (err) |
| 507 | goto exit_free; |
| 508 | |
| 509 | /* Expose as a hwmon device */ |
| 510 | data->hwmon_dev = hwmon_device_register(&client->dev); |
| 511 | if (IS_ERR(data->hwmon_dev)) { |
| 512 | err = PTR_ERR(data->hwmon_dev); |
| 513 | goto exit_remove; |
| 514 | } |
| 515 | |
| 516 | return 0; |
| 517 | |
| 518 | exit_remove: |
| 519 | sysfs_remove_group(&client->dev.kobj, &emc6w201_group); |
| 520 | exit_free: |
| 521 | kfree(data); |
| 522 | exit: |
| 523 | return err; |
| 524 | } |
| 525 | |
| 526 | static int emc6w201_remove(struct i2c_client *client) |
| 527 | { |
| 528 | struct emc6w201_data *data = i2c_get_clientdata(client); |
| 529 | |
| 530 | hwmon_device_unregister(data->hwmon_dev); |
| 531 | sysfs_remove_group(&client->dev.kobj, &emc6w201_group); |
| 532 | kfree(data); |
| 533 | |
| 534 | return 0; |
| 535 | } |
| 536 | |
| 537 | static const struct i2c_device_id emc6w201_id[] = { |
| 538 | { "emc6w201", 0 }, |
| 539 | { } |
| 540 | }; |
| 541 | MODULE_DEVICE_TABLE(i2c, emc6w201_id); |
| 542 | |
| 543 | static struct i2c_driver emc6w201_driver = { |
| 544 | .class = I2C_CLASS_HWMON, |
| 545 | .driver = { |
| 546 | .name = "emc6w201", |
| 547 | }, |
| 548 | .probe = emc6w201_probe, |
| 549 | .remove = emc6w201_remove, |
| 550 | .id_table = emc6w201_id, |
| 551 | .detect = emc6w201_detect, |
| 552 | .address_list = normal_i2c, |
| 553 | }; |
| 554 | |
| 555 | static int __init sensors_emc6w201_init(void) |
| 556 | { |
| 557 | return i2c_add_driver(&emc6w201_driver); |
| 558 | } |
| 559 | module_init(sensors_emc6w201_init); |
| 560 | |
| 561 | static void __exit sensors_emc6w201_exit(void) |
| 562 | { |
| 563 | i2c_del_driver(&emc6w201_driver); |
| 564 | } |
| 565 | module_exit(sensors_emc6w201_exit); |
| 566 | |
| 567 | MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); |
| 568 | MODULE_DESCRIPTION("SMSC EMC6W201 hardware monitoring driver"); |
| 569 | MODULE_LICENSE("GPL"); |