Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 1 | /* |
| 2 | * USB Attached SCSI |
| 3 | * Note that this is not the same as the USB Mass Storage driver |
| 4 | * |
| 5 | * Copyright Matthew Wilcox for Intel Corp, 2010 |
| 6 | * Copyright Sarah Sharp for Intel Corp, 2010 |
| 7 | * |
| 8 | * Distributed under the terms of the GNU GPL, version two. |
| 9 | */ |
| 10 | |
| 11 | #include <linux/blkdev.h> |
| 12 | #include <linux/slab.h> |
| 13 | #include <linux/types.h> |
Paul Gortmaker | 6eb0de8 | 2011-07-03 16:09:31 -0400 | [diff] [blame] | 14 | #include <linux/module.h> |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 15 | #include <linux/usb.h> |
Sebastian Andrzej Siewior | c898add | 2012-01-11 12:42:32 +0100 | [diff] [blame] | 16 | #include <linux/usb/hcd.h> |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 17 | #include <linux/usb/storage.h> |
Sebastian Andrzej Siewior | 348748b | 2012-01-11 12:45:56 +0100 | [diff] [blame] | 18 | #include <linux/usb/uas.h> |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 19 | |
| 20 | #include <scsi/scsi.h> |
| 21 | #include <scsi/scsi_dbg.h> |
| 22 | #include <scsi/scsi_cmnd.h> |
| 23 | #include <scsi/scsi_device.h> |
| 24 | #include <scsi/scsi_host.h> |
| 25 | #include <scsi/scsi_tcq.h> |
| 26 | |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 27 | /* |
| 28 | * The r00-r01c specs define this version of the SENSE IU data structure. |
| 29 | * It's still in use by several different firmware releases. |
| 30 | */ |
| 31 | struct sense_iu_old { |
| 32 | __u8 iu_id; |
| 33 | __u8 rsvd1; |
| 34 | __be16 tag; |
| 35 | __be16 len; |
| 36 | __u8 status; |
| 37 | __u8 service_response; |
| 38 | __u8 sense[SCSI_SENSE_BUFFERSIZE]; |
| 39 | }; |
| 40 | |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 41 | struct uas_dev_info { |
| 42 | struct usb_interface *intf; |
| 43 | struct usb_device *udev; |
| 44 | int qdepth; |
| 45 | unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe; |
| 46 | unsigned use_streams:1; |
| 47 | unsigned uas_sense_old:1; |
Sebastian Andrzej Siewior | 22188f4 | 2011-12-19 20:22:39 +0100 | [diff] [blame] | 48 | struct scsi_cmnd *cmnd; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 49 | }; |
| 50 | |
| 51 | enum { |
Matthew Wilcox | 92a3f76 | 2010-12-15 15:44:04 -0500 | [diff] [blame] | 52 | SUBMIT_STATUS_URB = (1 << 1), |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 53 | ALLOC_DATA_IN_URB = (1 << 2), |
| 54 | SUBMIT_DATA_IN_URB = (1 << 3), |
| 55 | ALLOC_DATA_OUT_URB = (1 << 4), |
| 56 | SUBMIT_DATA_OUT_URB = (1 << 5), |
| 57 | ALLOC_CMD_URB = (1 << 6), |
| 58 | SUBMIT_CMD_URB = (1 << 7), |
| 59 | }; |
| 60 | |
| 61 | /* Overrides scsi_pointer */ |
| 62 | struct uas_cmd_info { |
| 63 | unsigned int state; |
| 64 | unsigned int stream; |
| 65 | struct urb *cmd_urb; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 66 | struct urb *data_in_urb; |
| 67 | struct urb *data_out_urb; |
| 68 | struct list_head list; |
| 69 | }; |
| 70 | |
| 71 | /* I hate forward declarations, but I actually have a loop */ |
| 72 | static int uas_submit_urbs(struct scsi_cmnd *cmnd, |
| 73 | struct uas_dev_info *devinfo, gfp_t gfp); |
Sarah Sharp | ea9da1c | 2011-12-02 11:55:44 -0800 | [diff] [blame] | 74 | static void uas_do_work(struct work_struct *work); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 75 | |
Sarah Sharp | ea9da1c | 2011-12-02 11:55:44 -0800 | [diff] [blame] | 76 | static DECLARE_WORK(uas_work, uas_do_work); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 77 | static DEFINE_SPINLOCK(uas_work_lock); |
| 78 | static LIST_HEAD(uas_work_list); |
| 79 | |
| 80 | static void uas_do_work(struct work_struct *work) |
| 81 | { |
| 82 | struct uas_cmd_info *cmdinfo; |
Sarah Sharp | ea9da1c | 2011-12-02 11:55:44 -0800 | [diff] [blame] | 83 | struct uas_cmd_info *temp; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 84 | struct list_head list; |
Sarah Sharp | ea9da1c | 2011-12-02 11:55:44 -0800 | [diff] [blame] | 85 | int err; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 86 | |
| 87 | spin_lock_irq(&uas_work_lock); |
| 88 | list_replace_init(&uas_work_list, &list); |
| 89 | spin_unlock_irq(&uas_work_lock); |
| 90 | |
Sarah Sharp | ea9da1c | 2011-12-02 11:55:44 -0800 | [diff] [blame] | 91 | list_for_each_entry_safe(cmdinfo, temp, &list, list) { |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 92 | struct scsi_pointer *scp = (void *)cmdinfo; |
| 93 | struct scsi_cmnd *cmnd = container_of(scp, |
| 94 | struct scsi_cmnd, SCp); |
Sarah Sharp | ea9da1c | 2011-12-02 11:55:44 -0800 | [diff] [blame] | 95 | err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO); |
| 96 | if (err) { |
| 97 | list_del(&cmdinfo->list); |
| 98 | spin_lock_irq(&uas_work_lock); |
| 99 | list_add_tail(&cmdinfo->list, &uas_work_list); |
| 100 | spin_unlock_irq(&uas_work_lock); |
| 101 | schedule_work(&uas_work); |
| 102 | } |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 103 | } |
| 104 | } |
| 105 | |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 106 | static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd) |
| 107 | { |
| 108 | struct sense_iu *sense_iu = urb->transfer_buffer; |
| 109 | struct scsi_device *sdev = cmnd->device; |
| 110 | |
| 111 | if (urb->actual_length > 16) { |
| 112 | unsigned len = be16_to_cpup(&sense_iu->len); |
| 113 | if (len + 16 != urb->actual_length) { |
| 114 | int newlen = min(len + 16, urb->actual_length) - 16; |
| 115 | if (newlen < 0) |
| 116 | newlen = 0; |
| 117 | sdev_printk(KERN_INFO, sdev, "%s: urb length %d " |
| 118 | "disagrees with IU sense data length %d, " |
| 119 | "using %d bytes of sense data\n", __func__, |
| 120 | urb->actual_length, len, newlen); |
| 121 | len = newlen; |
| 122 | } |
| 123 | memcpy(cmnd->sense_buffer, sense_iu->sense, len); |
| 124 | } |
| 125 | |
| 126 | cmnd->result = sense_iu->status; |
Gerd Hoffmann | c621a81 | 2012-06-19 09:54:48 +0200 | [diff] [blame] | 127 | cmnd->scsi_done(cmnd); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 128 | } |
| 129 | |
| 130 | static void uas_sense_old(struct urb *urb, struct scsi_cmnd *cmnd) |
| 131 | { |
| 132 | struct sense_iu_old *sense_iu = urb->transfer_buffer; |
| 133 | struct scsi_device *sdev = cmnd->device; |
| 134 | |
| 135 | if (urb->actual_length > 8) { |
| 136 | unsigned len = be16_to_cpup(&sense_iu->len) - 2; |
| 137 | if (len + 8 != urb->actual_length) { |
| 138 | int newlen = min(len + 8, urb->actual_length) - 8; |
| 139 | if (newlen < 0) |
| 140 | newlen = 0; |
| 141 | sdev_printk(KERN_INFO, sdev, "%s: urb length %d " |
| 142 | "disagrees with IU sense data length %d, " |
| 143 | "using %d bytes of sense data\n", __func__, |
| 144 | urb->actual_length, len, newlen); |
| 145 | len = newlen; |
| 146 | } |
| 147 | memcpy(cmnd->sense_buffer, sense_iu->sense, len); |
| 148 | } |
| 149 | |
| 150 | cmnd->result = sense_iu->status; |
Gerd Hoffmann | c621a81 | 2012-06-19 09:54:48 +0200 | [diff] [blame] | 151 | cmnd->scsi_done(cmnd); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 152 | } |
| 153 | |
| 154 | static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd, |
| 155 | unsigned direction) |
| 156 | { |
| 157 | struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| 158 | int err; |
| 159 | |
Gerd Hoffmann | db32de1 | 2012-06-19 09:54:49 +0200 | [diff] [blame] | 160 | cmdinfo->state = direction | SUBMIT_STATUS_URB; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 161 | err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC); |
| 162 | if (err) { |
| 163 | spin_lock(&uas_work_lock); |
| 164 | list_add_tail(&cmdinfo->list, &uas_work_list); |
| 165 | spin_unlock(&uas_work_lock); |
| 166 | schedule_work(&uas_work); |
| 167 | } |
| 168 | } |
| 169 | |
| 170 | static void uas_stat_cmplt(struct urb *urb) |
| 171 | { |
| 172 | struct iu *iu = urb->transfer_buffer; |
Sebastian Andrzej Siewior | 22188f4 | 2011-12-19 20:22:39 +0100 | [diff] [blame] | 173 | struct Scsi_Host *shost = urb->context; |
| 174 | struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 175 | struct scsi_cmnd *cmnd; |
| 176 | u16 tag; |
| 177 | |
| 178 | if (urb->status) { |
| 179 | dev_err(&urb->dev->dev, "URB BAD STATUS %d\n", urb->status); |
Gerd Hoffmann | db32de1 | 2012-06-19 09:54:49 +0200 | [diff] [blame] | 180 | usb_free_urb(urb); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 181 | return; |
| 182 | } |
| 183 | |
| 184 | tag = be16_to_cpup(&iu->tag) - 1; |
Sebastian Andrzej Siewior | 22188f4 | 2011-12-19 20:22:39 +0100 | [diff] [blame] | 185 | if (tag == 0) |
| 186 | cmnd = devinfo->cmnd; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 187 | else |
Sebastian Andrzej Siewior | 22188f4 | 2011-12-19 20:22:39 +0100 | [diff] [blame] | 188 | cmnd = scsi_host_find_tag(shost, tag - 1); |
Sarah Sharp | 96c1eb9 | 2011-12-02 11:55:48 -0800 | [diff] [blame] | 189 | if (!cmnd) { |
Gerd Hoffmann | db32de1 | 2012-06-19 09:54:49 +0200 | [diff] [blame] | 190 | usb_free_urb(urb); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 191 | return; |
Sarah Sharp | 96c1eb9 | 2011-12-02 11:55:48 -0800 | [diff] [blame] | 192 | } |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 193 | |
| 194 | switch (iu->iu_id) { |
| 195 | case IU_ID_STATUS: |
Sebastian Andrzej Siewior | 22188f4 | 2011-12-19 20:22:39 +0100 | [diff] [blame] | 196 | if (devinfo->cmnd == cmnd) |
| 197 | devinfo->cmnd = NULL; |
| 198 | |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 199 | if (urb->actual_length < 16) |
| 200 | devinfo->uas_sense_old = 1; |
| 201 | if (devinfo->uas_sense_old) |
| 202 | uas_sense_old(urb, cmnd); |
| 203 | else |
| 204 | uas_sense(urb, cmnd); |
| 205 | break; |
| 206 | case IU_ID_READ_READY: |
| 207 | uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB); |
| 208 | break; |
| 209 | case IU_ID_WRITE_READY: |
| 210 | uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB); |
| 211 | break; |
| 212 | default: |
| 213 | scmd_printk(KERN_ERR, cmnd, |
| 214 | "Bogus IU (%d) received on status pipe\n", iu->iu_id); |
| 215 | } |
Gerd Hoffmann | e9bd7e1 | 2012-06-19 09:54:50 +0200 | [diff] [blame^] | 216 | usb_free_urb(urb); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 217 | } |
| 218 | |
Gerd Hoffmann | c621a81 | 2012-06-19 09:54:48 +0200 | [diff] [blame] | 219 | static void uas_data_cmplt(struct urb *urb) |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 220 | { |
Gerd Hoffmann | c621a81 | 2012-06-19 09:54:48 +0200 | [diff] [blame] | 221 | struct scsi_data_buffer *sdb = urb->context; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 222 | sdb->resid = sdb->length - urb->actual_length; |
| 223 | usb_free_urb(urb); |
| 224 | } |
| 225 | |
| 226 | static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp, |
Gerd Hoffmann | c621a81 | 2012-06-19 09:54:48 +0200 | [diff] [blame] | 227 | unsigned int pipe, u16 stream_id, |
| 228 | struct scsi_data_buffer *sdb, |
| 229 | enum dma_data_direction dir) |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 230 | { |
| 231 | struct usb_device *udev = devinfo->udev; |
| 232 | struct urb *urb = usb_alloc_urb(0, gfp); |
| 233 | |
| 234 | if (!urb) |
| 235 | goto out; |
Gerd Hoffmann | c621a81 | 2012-06-19 09:54:48 +0200 | [diff] [blame] | 236 | usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, uas_data_cmplt, |
| 237 | sdb); |
| 238 | if (devinfo->use_streams) |
| 239 | urb->stream_id = stream_id; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 240 | urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0; |
| 241 | urb->sg = sdb->table.sgl; |
| 242 | out: |
| 243 | return urb; |
| 244 | } |
| 245 | |
| 246 | static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp, |
Gerd Hoffmann | e9bd7e1 | 2012-06-19 09:54:50 +0200 | [diff] [blame^] | 247 | struct Scsi_Host *shost, u16 stream_id) |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 248 | { |
| 249 | struct usb_device *udev = devinfo->udev; |
| 250 | struct urb *urb = usb_alloc_urb(0, gfp); |
| 251 | struct sense_iu *iu; |
| 252 | |
| 253 | if (!urb) |
| 254 | goto out; |
| 255 | |
Matthew Wilcox | ac563cf | 2010-12-15 15:44:03 -0500 | [diff] [blame] | 256 | iu = kzalloc(sizeof(*iu), gfp); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 257 | if (!iu) |
| 258 | goto free; |
| 259 | |
| 260 | usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu), |
Gerd Hoffmann | e9bd7e1 | 2012-06-19 09:54:50 +0200 | [diff] [blame^] | 261 | uas_stat_cmplt, shost); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 262 | urb->stream_id = stream_id; |
| 263 | urb->transfer_flags |= URB_FREE_BUFFER; |
| 264 | out: |
| 265 | return urb; |
| 266 | free: |
| 267 | usb_free_urb(urb); |
| 268 | return NULL; |
| 269 | } |
| 270 | |
| 271 | static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, |
| 272 | struct scsi_cmnd *cmnd, u16 stream_id) |
| 273 | { |
| 274 | struct usb_device *udev = devinfo->udev; |
| 275 | struct scsi_device *sdev = cmnd->device; |
| 276 | struct urb *urb = usb_alloc_urb(0, gfp); |
| 277 | struct command_iu *iu; |
| 278 | int len; |
| 279 | |
| 280 | if (!urb) |
| 281 | goto out; |
| 282 | |
| 283 | len = cmnd->cmd_len - 16; |
| 284 | if (len < 0) |
| 285 | len = 0; |
| 286 | len = ALIGN(len, 4); |
Matthew Wilcox | ac563cf | 2010-12-15 15:44:03 -0500 | [diff] [blame] | 287 | iu = kzalloc(sizeof(*iu) + len, gfp); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 288 | if (!iu) |
| 289 | goto free; |
| 290 | |
| 291 | iu->iu_id = IU_ID_COMMAND; |
Sarah Sharp | 9eb4454 | 2011-12-02 11:55:46 -0800 | [diff] [blame] | 292 | if (blk_rq_tagged(cmnd->request)) |
Sebastian Andrzej Siewior | 22188f4 | 2011-12-19 20:22:39 +0100 | [diff] [blame] | 293 | iu->tag = cpu_to_be16(cmnd->request->tag + 2); |
Sarah Sharp | 9eb4454 | 2011-12-02 11:55:46 -0800 | [diff] [blame] | 294 | else |
| 295 | iu->tag = cpu_to_be16(1); |
Christoph Hellwig | 02e031c | 2010-11-10 14:54:09 +0100 | [diff] [blame] | 296 | iu->prio_attr = UAS_SIMPLE_TAG; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 297 | iu->len = len; |
| 298 | int_to_scsilun(sdev->lun, &iu->lun); |
| 299 | memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len); |
| 300 | |
| 301 | usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len, |
| 302 | usb_free_urb, NULL); |
| 303 | urb->transfer_flags |= URB_FREE_BUFFER; |
| 304 | out: |
| 305 | return urb; |
| 306 | free: |
| 307 | usb_free_urb(urb); |
| 308 | return NULL; |
| 309 | } |
| 310 | |
| 311 | /* |
| 312 | * Why should I request the Status IU before sending the Command IU? Spec |
| 313 | * says to, but also says the device may receive them in any order. Seems |
| 314 | * daft to me. |
| 315 | */ |
| 316 | |
Gerd Hoffmann | e9bd7e1 | 2012-06-19 09:54:50 +0200 | [diff] [blame^] | 317 | static int uas_submit_sense_urb(struct Scsi_Host *shost, |
| 318 | gfp_t gfp, unsigned int stream) |
| 319 | { |
| 320 | struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; |
| 321 | struct urb *urb; |
| 322 | |
| 323 | urb = uas_alloc_sense_urb(devinfo, gfp, shost, stream); |
| 324 | if (!urb) |
| 325 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 326 | if (usb_submit_urb(urb, gfp)) { |
| 327 | shost_printk(KERN_INFO, shost, |
| 328 | "sense urb submission failure\n"); |
| 329 | usb_free_urb(urb); |
| 330 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 331 | } |
| 332 | return 0; |
| 333 | } |
| 334 | |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 335 | static int uas_submit_urbs(struct scsi_cmnd *cmnd, |
Gerd Hoffmann | e9bd7e1 | 2012-06-19 09:54:50 +0200 | [diff] [blame^] | 336 | struct uas_dev_info *devinfo, gfp_t gfp) |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 337 | { |
| 338 | struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
Gerd Hoffmann | e9bd7e1 | 2012-06-19 09:54:50 +0200 | [diff] [blame^] | 339 | int err; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 340 | |
Matthew Wilcox | 92a3f76 | 2010-12-15 15:44:04 -0500 | [diff] [blame] | 341 | if (cmdinfo->state & SUBMIT_STATUS_URB) { |
Gerd Hoffmann | e9bd7e1 | 2012-06-19 09:54:50 +0200 | [diff] [blame^] | 342 | err = uas_submit_sense_urb(cmnd->device->host, gfp, |
| 343 | cmdinfo->stream); |
| 344 | if (err) { |
| 345 | return err; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 346 | } |
Matthew Wilcox | 92a3f76 | 2010-12-15 15:44:04 -0500 | [diff] [blame] | 347 | cmdinfo->state &= ~SUBMIT_STATUS_URB; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 348 | } |
| 349 | |
| 350 | if (cmdinfo->state & ALLOC_DATA_IN_URB) { |
| 351 | cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, gfp, |
Gerd Hoffmann | c621a81 | 2012-06-19 09:54:48 +0200 | [diff] [blame] | 352 | devinfo->data_in_pipe, cmdinfo->stream, |
| 353 | scsi_in(cmnd), DMA_FROM_DEVICE); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 354 | if (!cmdinfo->data_in_urb) |
| 355 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 356 | cmdinfo->state &= ~ALLOC_DATA_IN_URB; |
| 357 | } |
| 358 | |
| 359 | if (cmdinfo->state & SUBMIT_DATA_IN_URB) { |
| 360 | if (usb_submit_urb(cmdinfo->data_in_urb, gfp)) { |
| 361 | scmd_printk(KERN_INFO, cmnd, |
| 362 | "data in urb submission failure\n"); |
| 363 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 364 | } |
| 365 | cmdinfo->state &= ~SUBMIT_DATA_IN_URB; |
| 366 | } |
| 367 | |
| 368 | if (cmdinfo->state & ALLOC_DATA_OUT_URB) { |
| 369 | cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, gfp, |
Gerd Hoffmann | c621a81 | 2012-06-19 09:54:48 +0200 | [diff] [blame] | 370 | devinfo->data_out_pipe, cmdinfo->stream, |
| 371 | scsi_out(cmnd), DMA_TO_DEVICE); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 372 | if (!cmdinfo->data_out_urb) |
| 373 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 374 | cmdinfo->state &= ~ALLOC_DATA_OUT_URB; |
| 375 | } |
| 376 | |
| 377 | if (cmdinfo->state & SUBMIT_DATA_OUT_URB) { |
| 378 | if (usb_submit_urb(cmdinfo->data_out_urb, gfp)) { |
| 379 | scmd_printk(KERN_INFO, cmnd, |
| 380 | "data out urb submission failure\n"); |
| 381 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 382 | } |
| 383 | cmdinfo->state &= ~SUBMIT_DATA_OUT_URB; |
| 384 | } |
| 385 | |
| 386 | if (cmdinfo->state & ALLOC_CMD_URB) { |
| 387 | cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, gfp, cmnd, |
| 388 | cmdinfo->stream); |
| 389 | if (!cmdinfo->cmd_urb) |
| 390 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 391 | cmdinfo->state &= ~ALLOC_CMD_URB; |
| 392 | } |
| 393 | |
| 394 | if (cmdinfo->state & SUBMIT_CMD_URB) { |
| 395 | if (usb_submit_urb(cmdinfo->cmd_urb, gfp)) { |
| 396 | scmd_printk(KERN_INFO, cmnd, |
| 397 | "cmd urb submission failure\n"); |
| 398 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 399 | } |
| 400 | cmdinfo->state &= ~SUBMIT_CMD_URB; |
| 401 | } |
| 402 | |
| 403 | return 0; |
| 404 | } |
| 405 | |
Jeff Garzik | f281233 | 2010-11-16 02:10:29 -0500 | [diff] [blame] | 406 | static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 407 | void (*done)(struct scsi_cmnd *)) |
| 408 | { |
| 409 | struct scsi_device *sdev = cmnd->device; |
| 410 | struct uas_dev_info *devinfo = sdev->hostdata; |
| 411 | struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| 412 | int err; |
| 413 | |
| 414 | BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer)); |
| 415 | |
Sebastian Andrzej Siewior | 22188f4 | 2011-12-19 20:22:39 +0100 | [diff] [blame] | 416 | if (devinfo->cmnd) |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 417 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 418 | |
| 419 | if (blk_rq_tagged(cmnd->request)) { |
Sebastian Andrzej Siewior | 22188f4 | 2011-12-19 20:22:39 +0100 | [diff] [blame] | 420 | cmdinfo->stream = cmnd->request->tag + 2; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 421 | } else { |
Sebastian Andrzej Siewior | 22188f4 | 2011-12-19 20:22:39 +0100 | [diff] [blame] | 422 | devinfo->cmnd = cmnd; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 423 | cmdinfo->stream = 1; |
| 424 | } |
| 425 | |
| 426 | cmnd->scsi_done = done; |
| 427 | |
Gerd Hoffmann | e9bd7e1 | 2012-06-19 09:54:50 +0200 | [diff] [blame^] | 428 | cmdinfo->state = SUBMIT_STATUS_URB | |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 429 | ALLOC_CMD_URB | SUBMIT_CMD_URB; |
| 430 | |
| 431 | switch (cmnd->sc_data_direction) { |
| 432 | case DMA_FROM_DEVICE: |
| 433 | cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; |
| 434 | break; |
| 435 | case DMA_BIDIRECTIONAL: |
| 436 | cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; |
| 437 | case DMA_TO_DEVICE: |
| 438 | cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB; |
| 439 | case DMA_NONE: |
| 440 | break; |
| 441 | } |
| 442 | |
| 443 | if (!devinfo->use_streams) { |
Gerd Hoffmann | db32de1 | 2012-06-19 09:54:49 +0200 | [diff] [blame] | 444 | cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 445 | cmdinfo->stream = 0; |
| 446 | } |
| 447 | |
| 448 | err = uas_submit_urbs(cmnd, devinfo, GFP_ATOMIC); |
| 449 | if (err) { |
| 450 | /* If we did nothing, give up now */ |
Matthew Wilcox | 92a3f76 | 2010-12-15 15:44:04 -0500 | [diff] [blame] | 451 | if (cmdinfo->state & SUBMIT_STATUS_URB) { |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 452 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 453 | } |
| 454 | spin_lock(&uas_work_lock); |
| 455 | list_add_tail(&cmdinfo->list, &uas_work_list); |
| 456 | spin_unlock(&uas_work_lock); |
| 457 | schedule_work(&uas_work); |
| 458 | } |
| 459 | |
| 460 | return 0; |
| 461 | } |
| 462 | |
Jeff Garzik | f281233 | 2010-11-16 02:10:29 -0500 | [diff] [blame] | 463 | static DEF_SCSI_QCMD(uas_queuecommand) |
| 464 | |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 465 | static int uas_eh_abort_handler(struct scsi_cmnd *cmnd) |
| 466 | { |
| 467 | struct scsi_device *sdev = cmnd->device; |
| 468 | sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__, |
| 469 | cmnd->request->tag); |
| 470 | |
| 471 | /* XXX: Send ABORT TASK Task Management command */ |
| 472 | return FAILED; |
| 473 | } |
| 474 | |
| 475 | static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd) |
| 476 | { |
| 477 | struct scsi_device *sdev = cmnd->device; |
| 478 | sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__, |
| 479 | cmnd->request->tag); |
| 480 | |
| 481 | /* XXX: Send LOGICAL UNIT RESET Task Management command */ |
| 482 | return FAILED; |
| 483 | } |
| 484 | |
| 485 | static int uas_eh_target_reset_handler(struct scsi_cmnd *cmnd) |
| 486 | { |
| 487 | struct scsi_device *sdev = cmnd->device; |
| 488 | sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__, |
| 489 | cmnd->request->tag); |
| 490 | |
| 491 | /* XXX: Can we reset just the one USB interface? |
| 492 | * Would calling usb_set_interface() have the right effect? |
| 493 | */ |
| 494 | return FAILED; |
| 495 | } |
| 496 | |
| 497 | static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd) |
| 498 | { |
| 499 | struct scsi_device *sdev = cmnd->device; |
| 500 | struct uas_dev_info *devinfo = sdev->hostdata; |
| 501 | struct usb_device *udev = devinfo->udev; |
| 502 | |
| 503 | sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__, |
| 504 | cmnd->request->tag); |
| 505 | |
| 506 | if (usb_reset_device(udev)) |
| 507 | return SUCCESS; |
| 508 | |
| 509 | return FAILED; |
| 510 | } |
| 511 | |
| 512 | static int uas_slave_alloc(struct scsi_device *sdev) |
| 513 | { |
| 514 | sdev->hostdata = (void *)sdev->host->hostdata[0]; |
| 515 | return 0; |
| 516 | } |
| 517 | |
| 518 | static int uas_slave_configure(struct scsi_device *sdev) |
| 519 | { |
| 520 | struct uas_dev_info *devinfo = sdev->hostdata; |
| 521 | scsi_set_tag_type(sdev, MSG_ORDERED_TAG); |
Sebastian Andrzej Siewior | 22188f4 | 2011-12-19 20:22:39 +0100 | [diff] [blame] | 522 | scsi_activate_tcq(sdev, devinfo->qdepth - 2); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 523 | return 0; |
| 524 | } |
| 525 | |
| 526 | static struct scsi_host_template uas_host_template = { |
| 527 | .module = THIS_MODULE, |
| 528 | .name = "uas", |
| 529 | .queuecommand = uas_queuecommand, |
| 530 | .slave_alloc = uas_slave_alloc, |
| 531 | .slave_configure = uas_slave_configure, |
| 532 | .eh_abort_handler = uas_eh_abort_handler, |
| 533 | .eh_device_reset_handler = uas_eh_device_reset_handler, |
| 534 | .eh_target_reset_handler = uas_eh_target_reset_handler, |
| 535 | .eh_bus_reset_handler = uas_eh_bus_reset_handler, |
| 536 | .can_queue = 65536, /* Is there a limit on the _host_ ? */ |
| 537 | .this_id = -1, |
| 538 | .sg_tablesize = SG_NONE, |
| 539 | .cmd_per_lun = 1, /* until we override it */ |
| 540 | .skip_settle_delay = 1, |
| 541 | .ordered_tag = 1, |
| 542 | }; |
| 543 | |
| 544 | static struct usb_device_id uas_usb_ids[] = { |
| 545 | { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) }, |
| 546 | { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) }, |
| 547 | /* 0xaa is a prototype device I happen to have access to */ |
| 548 | { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, 0xaa) }, |
| 549 | { } |
| 550 | }; |
| 551 | MODULE_DEVICE_TABLE(usb, uas_usb_ids); |
| 552 | |
Matthew Wilcox | 89dc290 | 2010-12-15 15:44:05 -0500 | [diff] [blame] | 553 | static int uas_is_interface(struct usb_host_interface *intf) |
| 554 | { |
| 555 | return (intf->desc.bInterfaceClass == USB_CLASS_MASS_STORAGE && |
| 556 | intf->desc.bInterfaceSubClass == USB_SC_SCSI && |
| 557 | intf->desc.bInterfaceProtocol == USB_PR_UAS); |
| 558 | } |
| 559 | |
Sebastian Andrzej Siewior | c898add | 2012-01-11 12:42:32 +0100 | [diff] [blame] | 560 | static int uas_isnt_supported(struct usb_device *udev) |
| 561 | { |
| 562 | struct usb_hcd *hcd = bus_to_hcd(udev->bus); |
| 563 | |
| 564 | dev_warn(&udev->dev, "The driver for the USB controller %s does not " |
| 565 | "support scatter-gather which is\n", |
| 566 | hcd->driver->description); |
| 567 | dev_warn(&udev->dev, "required by the UAS driver. Please try an" |
| 568 | "alternative USB controller if you wish to use UAS.\n"); |
| 569 | return -ENODEV; |
| 570 | } |
| 571 | |
Matthew Wilcox | 89dc290 | 2010-12-15 15:44:05 -0500 | [diff] [blame] | 572 | static int uas_switch_interface(struct usb_device *udev, |
| 573 | struct usb_interface *intf) |
| 574 | { |
| 575 | int i; |
Sebastian Andrzej Siewior | c898add | 2012-01-11 12:42:32 +0100 | [diff] [blame] | 576 | int sg_supported = udev->bus->sg_tablesize != 0; |
Matthew Wilcox | 89dc290 | 2010-12-15 15:44:05 -0500 | [diff] [blame] | 577 | |
| 578 | for (i = 0; i < intf->num_altsetting; i++) { |
| 579 | struct usb_host_interface *alt = &intf->altsetting[i]; |
Sebastian Andrzej Siewior | c898add | 2012-01-11 12:42:32 +0100 | [diff] [blame] | 580 | |
| 581 | if (uas_is_interface(alt)) { |
| 582 | if (!sg_supported) |
| 583 | return uas_isnt_supported(udev); |
Matthew Wilcox | 89dc290 | 2010-12-15 15:44:05 -0500 | [diff] [blame] | 584 | return usb_set_interface(udev, |
| 585 | alt->desc.bInterfaceNumber, |
| 586 | alt->desc.bAlternateSetting); |
Sebastian Andrzej Siewior | c898add | 2012-01-11 12:42:32 +0100 | [diff] [blame] | 587 | } |
Matthew Wilcox | 89dc290 | 2010-12-15 15:44:05 -0500 | [diff] [blame] | 588 | } |
| 589 | |
| 590 | return -ENODEV; |
| 591 | } |
| 592 | |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 593 | static void uas_configure_endpoints(struct uas_dev_info *devinfo) |
| 594 | { |
| 595 | struct usb_host_endpoint *eps[4] = { }; |
| 596 | struct usb_interface *intf = devinfo->intf; |
| 597 | struct usb_device *udev = devinfo->udev; |
| 598 | struct usb_host_endpoint *endpoint = intf->cur_altsetting->endpoint; |
| 599 | unsigned i, n_endpoints = intf->cur_altsetting->desc.bNumEndpoints; |
| 600 | |
| 601 | devinfo->uas_sense_old = 0; |
Sebastian Andrzej Siewior | 22188f4 | 2011-12-19 20:22:39 +0100 | [diff] [blame] | 602 | devinfo->cmnd = NULL; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 603 | |
| 604 | for (i = 0; i < n_endpoints; i++) { |
| 605 | unsigned char *extra = endpoint[i].extra; |
| 606 | int len = endpoint[i].extralen; |
| 607 | while (len > 1) { |
| 608 | if (extra[1] == USB_DT_PIPE_USAGE) { |
| 609 | unsigned pipe_id = extra[2]; |
| 610 | if (pipe_id > 0 && pipe_id < 5) |
| 611 | eps[pipe_id - 1] = &endpoint[i]; |
| 612 | break; |
| 613 | } |
| 614 | len -= extra[0]; |
| 615 | extra += extra[0]; |
| 616 | } |
| 617 | } |
| 618 | |
| 619 | /* |
| 620 | * Assume that if we didn't find a control pipe descriptor, we're |
| 621 | * using a device with old firmware that happens to be set up like |
| 622 | * this. |
| 623 | */ |
| 624 | if (!eps[0]) { |
| 625 | devinfo->cmd_pipe = usb_sndbulkpipe(udev, 1); |
| 626 | devinfo->status_pipe = usb_rcvbulkpipe(udev, 1); |
| 627 | devinfo->data_in_pipe = usb_rcvbulkpipe(udev, 2); |
| 628 | devinfo->data_out_pipe = usb_sndbulkpipe(udev, 2); |
| 629 | |
| 630 | eps[1] = usb_pipe_endpoint(udev, devinfo->status_pipe); |
| 631 | eps[2] = usb_pipe_endpoint(udev, devinfo->data_in_pipe); |
| 632 | eps[3] = usb_pipe_endpoint(udev, devinfo->data_out_pipe); |
| 633 | } else { |
| 634 | devinfo->cmd_pipe = usb_sndbulkpipe(udev, |
| 635 | eps[0]->desc.bEndpointAddress); |
| 636 | devinfo->status_pipe = usb_rcvbulkpipe(udev, |
| 637 | eps[1]->desc.bEndpointAddress); |
| 638 | devinfo->data_in_pipe = usb_rcvbulkpipe(udev, |
| 639 | eps[2]->desc.bEndpointAddress); |
| 640 | devinfo->data_out_pipe = usb_sndbulkpipe(udev, |
| 641 | eps[3]->desc.bEndpointAddress); |
| 642 | } |
| 643 | |
| 644 | devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1, 3, 256, |
| 645 | GFP_KERNEL); |
| 646 | if (devinfo->qdepth < 0) { |
| 647 | devinfo->qdepth = 256; |
| 648 | devinfo->use_streams = 0; |
| 649 | } else { |
| 650 | devinfo->use_streams = 1; |
| 651 | } |
| 652 | } |
| 653 | |
Sebastian Andrzej Siewior | dae5154 | 2011-12-19 17:06:08 +0100 | [diff] [blame] | 654 | static void uas_free_streams(struct uas_dev_info *devinfo) |
| 655 | { |
| 656 | struct usb_device *udev = devinfo->udev; |
| 657 | struct usb_host_endpoint *eps[3]; |
| 658 | |
| 659 | eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe); |
| 660 | eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe); |
| 661 | eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe); |
| 662 | usb_free_streams(devinfo->intf, eps, 3, GFP_KERNEL); |
| 663 | } |
| 664 | |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 665 | /* |
| 666 | * XXX: What I'd like to do here is register a SCSI host for each USB host in |
| 667 | * the system. Follow usb-storage's design of registering a SCSI host for |
| 668 | * each USB device for the moment. Can implement this by walking up the |
| 669 | * USB hierarchy until we find a USB host. |
| 670 | */ |
| 671 | static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) |
| 672 | { |
| 673 | int result; |
| 674 | struct Scsi_Host *shost; |
| 675 | struct uas_dev_info *devinfo; |
| 676 | struct usb_device *udev = interface_to_usbdev(intf); |
| 677 | |
Matthew Wilcox | 89dc290 | 2010-12-15 15:44:05 -0500 | [diff] [blame] | 678 | if (uas_switch_interface(udev, intf)) |
| 679 | return -ENODEV; |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 680 | |
| 681 | devinfo = kmalloc(sizeof(struct uas_dev_info), GFP_KERNEL); |
| 682 | if (!devinfo) |
| 683 | return -ENOMEM; |
| 684 | |
| 685 | result = -ENOMEM; |
| 686 | shost = scsi_host_alloc(&uas_host_template, sizeof(void *)); |
| 687 | if (!shost) |
| 688 | goto free; |
| 689 | |
| 690 | shost->max_cmd_len = 16 + 252; |
| 691 | shost->max_id = 1; |
| 692 | shost->sg_tablesize = udev->bus->sg_tablesize; |
| 693 | |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 694 | devinfo->intf = intf; |
| 695 | devinfo->udev = udev; |
| 696 | uas_configure_endpoints(devinfo); |
| 697 | |
Sebastian Andrzej Siewior | 22188f4 | 2011-12-19 20:22:39 +0100 | [diff] [blame] | 698 | result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 2); |
Sebastian Andrzej Siewior | dae5154 | 2011-12-19 17:06:08 +0100 | [diff] [blame] | 699 | if (result) |
| 700 | goto free; |
| 701 | |
| 702 | result = scsi_add_host(shost, &intf->dev); |
| 703 | if (result) |
| 704 | goto deconfig_eps; |
| 705 | |
| 706 | shost->hostdata[0] = (unsigned long)devinfo; |
| 707 | |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 708 | scsi_scan_host(shost); |
| 709 | usb_set_intfdata(intf, shost); |
| 710 | return result; |
Sebastian Andrzej Siewior | dae5154 | 2011-12-19 17:06:08 +0100 | [diff] [blame] | 711 | |
| 712 | deconfig_eps: |
| 713 | uas_free_streams(devinfo); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 714 | free: |
| 715 | kfree(devinfo); |
| 716 | if (shost) |
| 717 | scsi_host_put(shost); |
| 718 | return result; |
| 719 | } |
| 720 | |
| 721 | static int uas_pre_reset(struct usb_interface *intf) |
| 722 | { |
| 723 | /* XXX: Need to return 1 if it's not our device in error handling */ |
| 724 | return 0; |
| 725 | } |
| 726 | |
| 727 | static int uas_post_reset(struct usb_interface *intf) |
| 728 | { |
| 729 | /* XXX: Need to return 1 if it's not our device in error handling */ |
| 730 | return 0; |
| 731 | } |
| 732 | |
| 733 | static void uas_disconnect(struct usb_interface *intf) |
| 734 | { |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 735 | struct Scsi_Host *shost = usb_get_intfdata(intf); |
| 736 | struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; |
| 737 | |
| 738 | scsi_remove_host(shost); |
Sebastian Andrzej Siewior | dae5154 | 2011-12-19 17:06:08 +0100 | [diff] [blame] | 739 | uas_free_streams(devinfo); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 740 | kfree(devinfo); |
| 741 | } |
| 742 | |
| 743 | /* |
| 744 | * XXX: Should this plug into libusual so we can auto-upgrade devices from |
| 745 | * Bulk-Only to UAS? |
| 746 | */ |
| 747 | static struct usb_driver uas_driver = { |
| 748 | .name = "uas", |
| 749 | .probe = uas_probe, |
| 750 | .disconnect = uas_disconnect, |
| 751 | .pre_reset = uas_pre_reset, |
| 752 | .post_reset = uas_post_reset, |
| 753 | .id_table = uas_usb_ids, |
| 754 | }; |
| 755 | |
Greg Kroah-Hartman | 65db430 | 2011-11-18 09:34:02 -0800 | [diff] [blame] | 756 | module_usb_driver(uas_driver); |
Matthew Wilcox | 115bb1f | 2010-10-07 13:05:23 +0200 | [diff] [blame] | 757 | |
| 758 | MODULE_LICENSE("GPL"); |
| 759 | MODULE_AUTHOR("Matthew Wilcox and Sarah Sharp"); |