Laurentiu Palcu | 4aeae9c | 2015-05-19 16:24:40 +0300 | [diff] [blame] | 1 | /* |
| 2 | * TI BQ25890 charger driver |
| 3 | * |
| 4 | * Copyright (C) 2015 Intel Corporation |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; either version 2 of the License, or |
| 9 | * (at your option) any later version. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
| 15 | * |
| 16 | */ |
| 17 | |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/i2c.h> |
| 20 | #include <linux/power_supply.h> |
| 21 | #include <linux/regmap.h> |
| 22 | #include <linux/types.h> |
| 23 | #include <linux/gpio/consumer.h> |
| 24 | #include <linux/interrupt.h> |
| 25 | #include <linux/delay.h> |
| 26 | #include <linux/usb/phy.h> |
| 27 | |
| 28 | #include <linux/acpi.h> |
| 29 | #include <linux/of.h> |
| 30 | |
| 31 | #define BQ25890_MANUFACTURER "Texas Instruments" |
| 32 | #define BQ25890_IRQ_PIN "bq25890_irq" |
| 33 | |
| 34 | #define BQ25890_ID 3 |
| 35 | |
| 36 | enum bq25890_fields { |
| 37 | F_EN_HIZ, F_EN_ILIM, F_IILIM, /* Reg00 */ |
| 38 | F_BHOT, F_BCOLD, F_VINDPM_OFS, /* Reg01 */ |
| 39 | F_CONV_START, F_CONV_RATE, F_BOOSTF, F_ICO_EN, |
| 40 | F_HVDCP_EN, F_MAXC_EN, F_FORCE_DPM, F_AUTO_DPDM_EN, /* Reg02 */ |
| 41 | F_BAT_LOAD_EN, F_WD_RST, F_OTG_CFG, F_CHG_CFG, F_SYSVMIN, /* Reg03 */ |
| 42 | F_PUMPX_EN, F_ICHG, /* Reg04 */ |
| 43 | F_IPRECHG, F_ITERM, /* Reg05 */ |
| 44 | F_VREG, F_BATLOWV, F_VRECHG, /* Reg06 */ |
| 45 | F_TERM_EN, F_STAT_DIS, F_WD, F_TMR_EN, F_CHG_TMR, |
| 46 | F_JEITA_ISET, /* Reg07 */ |
| 47 | F_BATCMP, F_VCLAMP, F_TREG, /* Reg08 */ |
| 48 | F_FORCE_ICO, F_TMR2X_EN, F_BATFET_DIS, F_JEITA_VSET, |
| 49 | F_BATFET_DLY, F_BATFET_RST_EN, F_PUMPX_UP, F_PUMPX_DN, /* Reg09 */ |
| 50 | F_BOOSTV, F_BOOSTI, /* Reg0A */ |
| 51 | F_VBUS_STAT, F_CHG_STAT, F_PG_STAT, F_SDP_STAT, F_VSYS_STAT, /* Reg0B */ |
| 52 | F_WD_FAULT, F_BOOST_FAULT, F_CHG_FAULT, F_BAT_FAULT, |
| 53 | F_NTC_FAULT, /* Reg0C */ |
| 54 | F_FORCE_VINDPM, F_VINDPM, /* Reg0D */ |
| 55 | F_THERM_STAT, F_BATV, /* Reg0E */ |
| 56 | F_SYSV, /* Reg0F */ |
| 57 | F_TSPCT, /* Reg10 */ |
| 58 | F_VBUS_GD, F_VBUSV, /* Reg11 */ |
| 59 | F_ICHGR, /* Reg12 */ |
| 60 | F_VDPM_STAT, F_IDPM_STAT, F_IDPM_LIM, /* Reg13 */ |
| 61 | F_REG_RST, F_ICO_OPTIMIZED, F_PN, F_TS_PROFILE, F_DEV_REV, /* Reg14 */ |
| 62 | |
| 63 | F_MAX_FIELDS |
| 64 | }; |
| 65 | |
| 66 | /* initial field values, converted to register values */ |
| 67 | struct bq25890_init_data { |
| 68 | u8 ichg; /* charge current */ |
| 69 | u8 vreg; /* regulation voltage */ |
| 70 | u8 iterm; /* termination current */ |
| 71 | u8 iprechg; /* precharge current */ |
| 72 | u8 sysvmin; /* minimum system voltage limit */ |
| 73 | u8 boostv; /* boost regulation voltage */ |
| 74 | u8 boosti; /* boost current limit */ |
| 75 | u8 boostf; /* boost frequency */ |
| 76 | u8 ilim_en; /* enable ILIM pin */ |
| 77 | u8 treg; /* thermal regulation threshold */ |
| 78 | }; |
| 79 | |
| 80 | struct bq25890_state { |
| 81 | u8 online; |
| 82 | u8 chrg_status; |
| 83 | u8 chrg_fault; |
| 84 | u8 vsys_status; |
| 85 | u8 boost_fault; |
| 86 | u8 bat_fault; |
| 87 | }; |
| 88 | |
| 89 | struct bq25890_device { |
| 90 | struct i2c_client *client; |
| 91 | struct device *dev; |
| 92 | struct power_supply *charger; |
| 93 | |
| 94 | struct usb_phy *usb_phy; |
| 95 | struct notifier_block usb_nb; |
| 96 | struct work_struct usb_work; |
| 97 | unsigned long usb_event; |
| 98 | |
| 99 | struct regmap *rmap; |
| 100 | struct regmap_field *rmap_fields[F_MAX_FIELDS]; |
| 101 | |
Laurentiu Palcu | 23fa43a | 2015-06-02 13:36:51 +0300 | [diff] [blame] | 102 | int chip_id; |
Laurentiu Palcu | 4aeae9c | 2015-05-19 16:24:40 +0300 | [diff] [blame] | 103 | struct bq25890_init_data init_data; |
| 104 | struct bq25890_state state; |
| 105 | |
| 106 | struct mutex lock; /* protect state data */ |
| 107 | }; |
| 108 | |
| 109 | static const struct regmap_range bq25890_readonly_reg_ranges[] = { |
| 110 | regmap_reg_range(0x0b, 0x0c), |
| 111 | regmap_reg_range(0x0e, 0x13), |
| 112 | }; |
| 113 | |
| 114 | static const struct regmap_access_table bq25890_writeable_regs = { |
| 115 | .no_ranges = bq25890_readonly_reg_ranges, |
| 116 | .n_no_ranges = ARRAY_SIZE(bq25890_readonly_reg_ranges), |
| 117 | }; |
| 118 | |
| 119 | static const struct regmap_range bq25890_volatile_reg_ranges[] = { |
| 120 | regmap_reg_range(0x00, 0x00), |
| 121 | regmap_reg_range(0x09, 0x09), |
| 122 | regmap_reg_range(0x0b, 0x0c), |
| 123 | regmap_reg_range(0x0e, 0x14), |
| 124 | }; |
| 125 | |
| 126 | static const struct regmap_access_table bq25890_volatile_regs = { |
| 127 | .yes_ranges = bq25890_volatile_reg_ranges, |
| 128 | .n_yes_ranges = ARRAY_SIZE(bq25890_volatile_reg_ranges), |
| 129 | }; |
| 130 | |
| 131 | static const struct regmap_config bq25890_regmap_config = { |
| 132 | .reg_bits = 8, |
| 133 | .val_bits = 8, |
| 134 | |
| 135 | .max_register = 0x14, |
| 136 | .cache_type = REGCACHE_RBTREE, |
| 137 | |
| 138 | .wr_table = &bq25890_writeable_regs, |
| 139 | .volatile_table = &bq25890_volatile_regs, |
| 140 | }; |
| 141 | |
| 142 | static const struct reg_field bq25890_reg_fields[] = { |
| 143 | /* REG00 */ |
| 144 | [F_EN_HIZ] = REG_FIELD(0x00, 7, 7), |
| 145 | [F_EN_ILIM] = REG_FIELD(0x00, 6, 6), |
| 146 | [F_IILIM] = REG_FIELD(0x00, 0, 5), |
| 147 | /* REG01 */ |
| 148 | [F_BHOT] = REG_FIELD(0x01, 6, 7), |
| 149 | [F_BCOLD] = REG_FIELD(0x01, 5, 5), |
| 150 | [F_VINDPM_OFS] = REG_FIELD(0x01, 0, 4), |
| 151 | /* REG02 */ |
| 152 | [F_CONV_START] = REG_FIELD(0x02, 7, 7), |
| 153 | [F_CONV_RATE] = REG_FIELD(0x02, 6, 6), |
| 154 | [F_BOOSTF] = REG_FIELD(0x02, 5, 5), |
| 155 | [F_ICO_EN] = REG_FIELD(0x02, 4, 4), |
| 156 | [F_HVDCP_EN] = REG_FIELD(0x02, 3, 3), |
| 157 | [F_MAXC_EN] = REG_FIELD(0x02, 2, 2), |
| 158 | [F_FORCE_DPM] = REG_FIELD(0x02, 1, 1), |
| 159 | [F_AUTO_DPDM_EN] = REG_FIELD(0x02, 0, 0), |
| 160 | /* REG03 */ |
| 161 | [F_BAT_LOAD_EN] = REG_FIELD(0x03, 7, 7), |
| 162 | [F_WD_RST] = REG_FIELD(0x03, 6, 6), |
| 163 | [F_OTG_CFG] = REG_FIELD(0x03, 5, 5), |
| 164 | [F_CHG_CFG] = REG_FIELD(0x03, 4, 4), |
| 165 | [F_SYSVMIN] = REG_FIELD(0x03, 1, 3), |
| 166 | /* REG04 */ |
| 167 | [F_PUMPX_EN] = REG_FIELD(0x04, 7, 7), |
| 168 | [F_ICHG] = REG_FIELD(0x04, 0, 6), |
| 169 | /* REG05 */ |
| 170 | [F_IPRECHG] = REG_FIELD(0x05, 4, 7), |
| 171 | [F_ITERM] = REG_FIELD(0x05, 0, 3), |
| 172 | /* REG06 */ |
| 173 | [F_VREG] = REG_FIELD(0x06, 2, 7), |
| 174 | [F_BATLOWV] = REG_FIELD(0x06, 1, 1), |
| 175 | [F_VRECHG] = REG_FIELD(0x06, 0, 0), |
| 176 | /* REG07 */ |
| 177 | [F_TERM_EN] = REG_FIELD(0x07, 7, 7), |
| 178 | [F_STAT_DIS] = REG_FIELD(0x07, 6, 6), |
| 179 | [F_WD] = REG_FIELD(0x07, 4, 5), |
| 180 | [F_TMR_EN] = REG_FIELD(0x07, 3, 3), |
| 181 | [F_CHG_TMR] = REG_FIELD(0x07, 1, 2), |
| 182 | [F_JEITA_ISET] = REG_FIELD(0x07, 0, 0), |
| 183 | /* REG08 */ |
| 184 | [F_BATCMP] = REG_FIELD(0x08, 6, 7), |
| 185 | [F_VCLAMP] = REG_FIELD(0x08, 2, 4), |
| 186 | [F_TREG] = REG_FIELD(0x08, 0, 1), |
| 187 | /* REG09 */ |
| 188 | [F_FORCE_ICO] = REG_FIELD(0x09, 7, 7), |
| 189 | [F_TMR2X_EN] = REG_FIELD(0x09, 6, 6), |
| 190 | [F_BATFET_DIS] = REG_FIELD(0x09, 5, 5), |
| 191 | [F_JEITA_VSET] = REG_FIELD(0x09, 4, 4), |
| 192 | [F_BATFET_DLY] = REG_FIELD(0x09, 3, 3), |
| 193 | [F_BATFET_RST_EN] = REG_FIELD(0x09, 2, 2), |
| 194 | [F_PUMPX_UP] = REG_FIELD(0x09, 1, 1), |
| 195 | [F_PUMPX_DN] = REG_FIELD(0x09, 0, 0), |
| 196 | /* REG0A */ |
| 197 | [F_BOOSTV] = REG_FIELD(0x0A, 4, 7), |
| 198 | [F_BOOSTI] = REG_FIELD(0x0A, 0, 2), |
| 199 | /* REG0B */ |
| 200 | [F_VBUS_STAT] = REG_FIELD(0x0B, 5, 7), |
| 201 | [F_CHG_STAT] = REG_FIELD(0x0B, 3, 4), |
| 202 | [F_PG_STAT] = REG_FIELD(0x0B, 2, 2), |
| 203 | [F_SDP_STAT] = REG_FIELD(0x0B, 1, 1), |
| 204 | [F_VSYS_STAT] = REG_FIELD(0x0B, 0, 0), |
| 205 | /* REG0C */ |
| 206 | [F_WD_FAULT] = REG_FIELD(0x0C, 7, 7), |
| 207 | [F_BOOST_FAULT] = REG_FIELD(0x0C, 6, 6), |
| 208 | [F_CHG_FAULT] = REG_FIELD(0x0C, 4, 5), |
| 209 | [F_BAT_FAULT] = REG_FIELD(0x0C, 3, 3), |
| 210 | [F_NTC_FAULT] = REG_FIELD(0x0C, 0, 2), |
| 211 | /* REG0D */ |
| 212 | [F_FORCE_VINDPM] = REG_FIELD(0x0D, 7, 7), |
| 213 | [F_VINDPM] = REG_FIELD(0x0D, 0, 6), |
| 214 | /* REG0E */ |
| 215 | [F_THERM_STAT] = REG_FIELD(0x0E, 7, 7), |
| 216 | [F_BATV] = REG_FIELD(0x0E, 0, 6), |
| 217 | /* REG0F */ |
| 218 | [F_SYSV] = REG_FIELD(0x0F, 0, 6), |
| 219 | /* REG10 */ |
| 220 | [F_TSPCT] = REG_FIELD(0x10, 0, 6), |
| 221 | /* REG11 */ |
| 222 | [F_VBUS_GD] = REG_FIELD(0x11, 7, 7), |
| 223 | [F_VBUSV] = REG_FIELD(0x11, 0, 6), |
| 224 | /* REG12 */ |
| 225 | [F_ICHGR] = REG_FIELD(0x12, 0, 6), |
| 226 | /* REG13 */ |
| 227 | [F_VDPM_STAT] = REG_FIELD(0x13, 7, 7), |
| 228 | [F_IDPM_STAT] = REG_FIELD(0x13, 6, 6), |
| 229 | [F_IDPM_LIM] = REG_FIELD(0x13, 0, 5), |
| 230 | /* REG14 */ |
| 231 | [F_REG_RST] = REG_FIELD(0x14, 7, 7), |
| 232 | [F_ICO_OPTIMIZED] = REG_FIELD(0x14, 6, 6), |
| 233 | [F_PN] = REG_FIELD(0x14, 3, 5), |
| 234 | [F_TS_PROFILE] = REG_FIELD(0x14, 2, 2), |
| 235 | [F_DEV_REV] = REG_FIELD(0x14, 0, 1) |
| 236 | }; |
| 237 | |
| 238 | /* |
| 239 | * Most of the val -> idx conversions can be computed, given the minimum, |
| 240 | * maximum and the step between values. For the rest of conversions, we use |
| 241 | * lookup tables. |
| 242 | */ |
| 243 | enum bq25890_table_ids { |
| 244 | /* range tables */ |
| 245 | TBL_ICHG, |
| 246 | TBL_ITERM, |
| 247 | TBL_IPRECHG, |
| 248 | TBL_VREG, |
| 249 | TBL_BATCMP, |
| 250 | TBL_VCLAMP, |
| 251 | TBL_BOOSTV, |
| 252 | TBL_SYSVMIN, |
| 253 | |
| 254 | /* lookup tables */ |
| 255 | TBL_TREG, |
| 256 | TBL_BOOSTI, |
| 257 | }; |
| 258 | |
| 259 | /* Thermal Regulation Threshold lookup table, in degrees Celsius */ |
| 260 | static const u32 bq25890_treg_tbl[] = { 60, 80, 100, 120 }; |
| 261 | |
| 262 | #define BQ25890_TREG_TBL_SIZE ARRAY_SIZE(bq25890_treg_tbl) |
| 263 | |
| 264 | /* Boost mode current limit lookup table, in uA */ |
| 265 | static const u32 bq25890_boosti_tbl[] = { |
| 266 | 500000, 700000, 1100000, 1300000, 1600000, 1800000, 2100000, 2400000 |
| 267 | }; |
| 268 | |
| 269 | #define BQ25890_BOOSTI_TBL_SIZE ARRAY_SIZE(bq25890_boosti_tbl) |
| 270 | |
| 271 | struct bq25890_range { |
| 272 | u32 min; |
| 273 | u32 max; |
| 274 | u32 step; |
| 275 | }; |
| 276 | |
| 277 | struct bq25890_lookup { |
| 278 | const u32 *tbl; |
| 279 | u32 size; |
| 280 | }; |
| 281 | |
| 282 | static const union { |
| 283 | struct bq25890_range rt; |
| 284 | struct bq25890_lookup lt; |
| 285 | } bq25890_tables[] = { |
| 286 | /* range tables */ |
| 287 | [TBL_ICHG] = { .rt = {0, 5056000, 64000} }, /* uA */ |
| 288 | [TBL_ITERM] = { .rt = {64000, 1024000, 64000} }, /* uA */ |
| 289 | [TBL_VREG] = { .rt = {3840000, 4608000, 16000} }, /* uV */ |
| 290 | [TBL_BATCMP] = { .rt = {0, 140, 20} }, /* mOhm */ |
| 291 | [TBL_VCLAMP] = { .rt = {0, 224000, 32000} }, /* uV */ |
| 292 | [TBL_BOOSTV] = { .rt = {4550000, 5510000, 64000} }, /* uV */ |
| 293 | [TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} }, /* uV */ |
| 294 | |
| 295 | /* lookup tables */ |
| 296 | [TBL_TREG] = { .lt = {bq25890_treg_tbl, BQ25890_TREG_TBL_SIZE} }, |
| 297 | [TBL_BOOSTI] = { .lt = {bq25890_boosti_tbl, BQ25890_BOOSTI_TBL_SIZE} } |
| 298 | }; |
| 299 | |
| 300 | static int bq25890_field_read(struct bq25890_device *bq, |
| 301 | enum bq25890_fields field_id) |
| 302 | { |
| 303 | int ret; |
| 304 | int val; |
| 305 | |
| 306 | ret = regmap_field_read(bq->rmap_fields[field_id], &val); |
| 307 | if (ret < 0) |
| 308 | return ret; |
| 309 | |
| 310 | return val; |
| 311 | } |
| 312 | |
| 313 | static int bq25890_field_write(struct bq25890_device *bq, |
| 314 | enum bq25890_fields field_id, u8 val) |
| 315 | { |
| 316 | return regmap_field_write(bq->rmap_fields[field_id], val); |
| 317 | } |
| 318 | |
| 319 | static u8 bq25890_find_idx(u32 value, enum bq25890_table_ids id) |
| 320 | { |
| 321 | u8 idx; |
| 322 | |
| 323 | if (id >= TBL_TREG) { |
| 324 | const u32 *tbl = bq25890_tables[id].lt.tbl; |
| 325 | u32 tbl_size = bq25890_tables[id].lt.size; |
| 326 | |
| 327 | for (idx = 1; idx < tbl_size && tbl[idx] <= value; idx++) |
| 328 | ; |
| 329 | } else { |
| 330 | const struct bq25890_range *rtbl = &bq25890_tables[id].rt; |
| 331 | u8 rtbl_size; |
| 332 | |
| 333 | rtbl_size = (rtbl->max - rtbl->min) / rtbl->step + 1; |
| 334 | |
| 335 | for (idx = 1; |
| 336 | idx < rtbl_size && (idx * rtbl->step + rtbl->min <= value); |
| 337 | idx++) |
| 338 | ; |
| 339 | } |
| 340 | |
| 341 | return idx - 1; |
| 342 | } |
| 343 | |
| 344 | static u32 bq25890_find_val(u8 idx, enum bq25890_table_ids id) |
| 345 | { |
| 346 | const struct bq25890_range *rtbl; |
| 347 | |
| 348 | /* lookup table? */ |
| 349 | if (id >= TBL_TREG) |
| 350 | return bq25890_tables[id].lt.tbl[idx]; |
| 351 | |
| 352 | /* range table */ |
| 353 | rtbl = &bq25890_tables[id].rt; |
| 354 | |
| 355 | return (rtbl->min + idx * rtbl->step); |
| 356 | } |
| 357 | |
| 358 | enum bq25890_status { |
| 359 | STATUS_NOT_CHARGING, |
| 360 | STATUS_PRE_CHARGING, |
| 361 | STATUS_FAST_CHARGING, |
| 362 | STATUS_TERMINATION_DONE, |
| 363 | }; |
| 364 | |
| 365 | enum bq25890_chrg_fault { |
| 366 | CHRG_FAULT_NORMAL, |
| 367 | CHRG_FAULT_INPUT, |
| 368 | CHRG_FAULT_THERMAL_SHUTDOWN, |
| 369 | CHRG_FAULT_TIMER_EXPIRED, |
| 370 | }; |
| 371 | |
| 372 | static int bq25890_power_supply_get_property(struct power_supply *psy, |
| 373 | enum power_supply_property psp, |
| 374 | union power_supply_propval *val) |
| 375 | { |
| 376 | int ret; |
| 377 | struct bq25890_device *bq = power_supply_get_drvdata(psy); |
| 378 | struct bq25890_state state; |
| 379 | |
| 380 | mutex_lock(&bq->lock); |
| 381 | state = bq->state; |
| 382 | mutex_unlock(&bq->lock); |
| 383 | |
| 384 | switch (psp) { |
| 385 | case POWER_SUPPLY_PROP_STATUS: |
| 386 | if (!state.online) |
| 387 | val->intval = POWER_SUPPLY_STATUS_DISCHARGING; |
| 388 | else if (state.chrg_status == STATUS_NOT_CHARGING) |
| 389 | val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| 390 | else if (state.chrg_status == STATUS_PRE_CHARGING || |
| 391 | state.chrg_status == STATUS_FAST_CHARGING) |
| 392 | val->intval = POWER_SUPPLY_STATUS_CHARGING; |
| 393 | else if (state.chrg_status == STATUS_TERMINATION_DONE) |
| 394 | val->intval = POWER_SUPPLY_STATUS_FULL; |
| 395 | else |
| 396 | val->intval = POWER_SUPPLY_STATUS_UNKNOWN; |
| 397 | |
| 398 | break; |
| 399 | |
| 400 | case POWER_SUPPLY_PROP_MANUFACTURER: |
| 401 | val->strval = BQ25890_MANUFACTURER; |
| 402 | break; |
| 403 | |
| 404 | case POWER_SUPPLY_PROP_ONLINE: |
| 405 | val->intval = state.online; |
| 406 | break; |
| 407 | |
| 408 | case POWER_SUPPLY_PROP_HEALTH: |
| 409 | if (!state.chrg_fault && !state.bat_fault && !state.boost_fault) |
| 410 | val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| 411 | else if (state.bat_fault) |
| 412 | val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| 413 | else if (state.chrg_fault == CHRG_FAULT_TIMER_EXPIRED) |
| 414 | val->intval = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; |
| 415 | else if (state.chrg_fault == CHRG_FAULT_THERMAL_SHUTDOWN) |
| 416 | val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; |
| 417 | else |
| 418 | val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; |
| 419 | break; |
| 420 | |
| 421 | case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| 422 | ret = bq25890_field_read(bq, F_ICHGR); /* read measured value */ |
| 423 | if (ret < 0) |
| 424 | return ret; |
| 425 | |
| 426 | /* converted_val = ADC_val * 50mA (table 10.3.19) */ |
| 427 | val->intval = ret * 50000; |
| 428 | break; |
| 429 | |
| 430 | case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: |
| 431 | val->intval = bq25890_tables[TBL_ICHG].rt.max; |
| 432 | break; |
| 433 | |
| 434 | case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| 435 | if (!state.online) { |
| 436 | val->intval = 0; |
| 437 | break; |
| 438 | } |
| 439 | |
| 440 | ret = bq25890_field_read(bq, F_BATV); /* read measured value */ |
| 441 | if (ret < 0) |
| 442 | return ret; |
| 443 | |
| 444 | /* converted_val = 2.304V + ADC_val * 20mV (table 10.3.15) */ |
| 445 | val->intval = 2304000 + ret * 20000; |
| 446 | break; |
| 447 | |
| 448 | case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: |
| 449 | val->intval = bq25890_tables[TBL_VREG].rt.max; |
| 450 | break; |
| 451 | |
| 452 | case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: |
| 453 | val->intval = bq25890_find_val(bq->init_data.iterm, TBL_ITERM); |
| 454 | break; |
| 455 | |
| 456 | default: |
| 457 | return -EINVAL; |
| 458 | } |
| 459 | |
| 460 | return 0; |
| 461 | } |
| 462 | |
| 463 | static int bq25890_get_chip_state(struct bq25890_device *bq, |
| 464 | struct bq25890_state *state) |
| 465 | { |
| 466 | int i, ret; |
| 467 | |
| 468 | struct { |
| 469 | enum bq25890_fields id; |
| 470 | u8 *data; |
| 471 | } state_fields[] = { |
| 472 | {F_CHG_STAT, &state->chrg_status}, |
| 473 | {F_PG_STAT, &state->online}, |
| 474 | {F_VSYS_STAT, &state->vsys_status}, |
| 475 | {F_BOOST_FAULT, &state->boost_fault}, |
| 476 | {F_BAT_FAULT, &state->bat_fault}, |
| 477 | {F_CHG_FAULT, &state->chrg_fault} |
| 478 | }; |
| 479 | |
| 480 | for (i = 0; i < ARRAY_SIZE(state_fields); i++) { |
| 481 | ret = bq25890_field_read(bq, state_fields[i].id); |
| 482 | if (ret < 0) |
| 483 | return ret; |
| 484 | |
| 485 | *state_fields[i].data = ret; |
| 486 | } |
| 487 | |
| 488 | dev_dbg(bq->dev, "S:CHG/PG/VSYS=%d/%d/%d, F:CHG/BOOST/BAT=%d/%d/%d\n", |
| 489 | state->chrg_status, state->online, state->vsys_status, |
| 490 | state->chrg_fault, state->boost_fault, state->bat_fault); |
| 491 | |
| 492 | return 0; |
| 493 | } |
| 494 | |
| 495 | static bool bq25890_state_changed(struct bq25890_device *bq, |
| 496 | struct bq25890_state *new_state) |
| 497 | { |
| 498 | struct bq25890_state old_state; |
| 499 | |
| 500 | mutex_lock(&bq->lock); |
| 501 | old_state = bq->state; |
| 502 | mutex_unlock(&bq->lock); |
| 503 | |
| 504 | return (old_state.chrg_status != new_state->chrg_status || |
| 505 | old_state.chrg_fault != new_state->chrg_fault || |
| 506 | old_state.online != new_state->online || |
| 507 | old_state.bat_fault != new_state->bat_fault || |
| 508 | old_state.boost_fault != new_state->boost_fault || |
| 509 | old_state.vsys_status != new_state->vsys_status); |
| 510 | } |
| 511 | |
| 512 | static void bq25890_handle_state_change(struct bq25890_device *bq, |
| 513 | struct bq25890_state *new_state) |
| 514 | { |
| 515 | int ret; |
| 516 | struct bq25890_state old_state; |
| 517 | |
| 518 | mutex_lock(&bq->lock); |
| 519 | old_state = bq->state; |
| 520 | mutex_unlock(&bq->lock); |
| 521 | |
| 522 | if (!new_state->online) { /* power removed */ |
| 523 | /* disable ADC */ |
| 524 | ret = bq25890_field_write(bq, F_CONV_START, 0); |
| 525 | if (ret < 0) |
| 526 | goto error; |
| 527 | } else if (!old_state.online) { /* power inserted */ |
| 528 | /* enable ADC, to have control of charge current/voltage */ |
| 529 | ret = bq25890_field_write(bq, F_CONV_START, 1); |
| 530 | if (ret < 0) |
| 531 | goto error; |
| 532 | } |
| 533 | |
| 534 | return; |
| 535 | |
| 536 | error: |
| 537 | dev_err(bq->dev, "Error communicating with the chip.\n"); |
| 538 | } |
| 539 | |
| 540 | static irqreturn_t bq25890_irq_handler_thread(int irq, void *private) |
| 541 | { |
| 542 | struct bq25890_device *bq = private; |
| 543 | int ret; |
| 544 | struct bq25890_state state; |
| 545 | |
| 546 | ret = bq25890_get_chip_state(bq, &state); |
| 547 | if (ret < 0) |
| 548 | goto handled; |
| 549 | |
| 550 | if (!bq25890_state_changed(bq, &state)) |
| 551 | goto handled; |
| 552 | |
| 553 | bq25890_handle_state_change(bq, &state); |
| 554 | |
| 555 | mutex_lock(&bq->lock); |
| 556 | bq->state = state; |
| 557 | mutex_unlock(&bq->lock); |
| 558 | |
| 559 | power_supply_changed(bq->charger); |
| 560 | |
| 561 | handled: |
| 562 | return IRQ_HANDLED; |
| 563 | } |
| 564 | |
| 565 | static int bq25890_chip_reset(struct bq25890_device *bq) |
| 566 | { |
| 567 | int ret; |
| 568 | int rst_check_counter = 10; |
| 569 | |
| 570 | ret = bq25890_field_write(bq, F_REG_RST, 1); |
| 571 | if (ret < 0) |
| 572 | return ret; |
| 573 | |
| 574 | do { |
| 575 | ret = bq25890_field_read(bq, F_REG_RST); |
| 576 | if (ret < 0) |
| 577 | return ret; |
| 578 | |
| 579 | usleep_range(5, 10); |
| 580 | } while (ret == 1 && --rst_check_counter); |
| 581 | |
| 582 | if (!rst_check_counter) |
| 583 | return -ETIMEDOUT; |
| 584 | |
| 585 | return 0; |
| 586 | } |
| 587 | |
| 588 | static int bq25890_hw_init(struct bq25890_device *bq) |
| 589 | { |
| 590 | int ret; |
| 591 | int i; |
| 592 | struct bq25890_state state; |
| 593 | |
| 594 | const struct { |
| 595 | enum bq25890_fields id; |
| 596 | u32 value; |
| 597 | } init_data[] = { |
| 598 | {F_ICHG, bq->init_data.ichg}, |
| 599 | {F_VREG, bq->init_data.vreg}, |
| 600 | {F_ITERM, bq->init_data.iterm}, |
| 601 | {F_IPRECHG, bq->init_data.iprechg}, |
| 602 | {F_SYSVMIN, bq->init_data.sysvmin}, |
| 603 | {F_BOOSTV, bq->init_data.boostv}, |
| 604 | {F_BOOSTI, bq->init_data.boosti}, |
| 605 | {F_BOOSTF, bq->init_data.boostf}, |
| 606 | {F_EN_ILIM, bq->init_data.ilim_en}, |
| 607 | {F_TREG, bq->init_data.treg} |
| 608 | }; |
| 609 | |
| 610 | ret = bq25890_chip_reset(bq); |
| 611 | if (ret < 0) |
| 612 | return ret; |
| 613 | |
| 614 | /* disable watchdog */ |
| 615 | ret = bq25890_field_write(bq, F_WD, 0); |
| 616 | if (ret < 0) |
| 617 | return ret; |
| 618 | |
| 619 | /* initialize currents/voltages and other parameters */ |
| 620 | for (i = 0; i < ARRAY_SIZE(init_data); i++) { |
| 621 | ret = bq25890_field_write(bq, init_data[i].id, |
| 622 | init_data[i].value); |
| 623 | if (ret < 0) |
| 624 | return ret; |
| 625 | } |
| 626 | |
| 627 | /* Configure ADC for continuous conversions. This does not enable it. */ |
| 628 | ret = bq25890_field_write(bq, F_CONV_RATE, 1); |
| 629 | if (ret < 0) |
| 630 | return ret; |
| 631 | |
| 632 | ret = bq25890_get_chip_state(bq, &state); |
| 633 | if (ret < 0) |
| 634 | return ret; |
| 635 | |
| 636 | mutex_lock(&bq->lock); |
| 637 | bq->state = state; |
| 638 | mutex_unlock(&bq->lock); |
| 639 | |
| 640 | return 0; |
| 641 | } |
| 642 | |
| 643 | static enum power_supply_property bq25890_power_supply_props[] = { |
| 644 | POWER_SUPPLY_PROP_MANUFACTURER, |
| 645 | POWER_SUPPLY_PROP_STATUS, |
| 646 | POWER_SUPPLY_PROP_ONLINE, |
| 647 | POWER_SUPPLY_PROP_HEALTH, |
| 648 | POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, |
| 649 | POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, |
| 650 | POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, |
| 651 | POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, |
| 652 | POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, |
| 653 | }; |
| 654 | |
| 655 | static char *bq25890_charger_supplied_to[] = { |
| 656 | "main-battery", |
| 657 | }; |
| 658 | |
| 659 | static const struct power_supply_desc bq25890_power_supply_desc = { |
| 660 | .name = "bq25890-charger", |
| 661 | .type = POWER_SUPPLY_TYPE_USB, |
| 662 | .properties = bq25890_power_supply_props, |
| 663 | .num_properties = ARRAY_SIZE(bq25890_power_supply_props), |
| 664 | .get_property = bq25890_power_supply_get_property, |
| 665 | }; |
| 666 | |
| 667 | static int bq25890_power_supply_init(struct bq25890_device *bq) |
| 668 | { |
| 669 | struct power_supply_config psy_cfg = { .drv_data = bq, }; |
| 670 | |
| 671 | psy_cfg.supplied_to = bq25890_charger_supplied_to; |
| 672 | psy_cfg.num_supplicants = ARRAY_SIZE(bq25890_charger_supplied_to); |
| 673 | |
| 674 | bq->charger = power_supply_register(bq->dev, &bq25890_power_supply_desc, |
| 675 | &psy_cfg); |
| 676 | |
| 677 | return PTR_ERR_OR_ZERO(bq->charger); |
| 678 | } |
| 679 | |
| 680 | static void bq25890_usb_work(struct work_struct *data) |
| 681 | { |
| 682 | int ret; |
| 683 | struct bq25890_device *bq = |
| 684 | container_of(data, struct bq25890_device, usb_work); |
| 685 | |
| 686 | switch (bq->usb_event) { |
| 687 | case USB_EVENT_ID: |
| 688 | /* Enable boost mode */ |
| 689 | ret = bq25890_field_write(bq, F_OTG_CFG, 1); |
| 690 | if (ret < 0) |
| 691 | goto error; |
| 692 | break; |
| 693 | |
| 694 | case USB_EVENT_NONE: |
| 695 | /* Disable boost mode */ |
| 696 | ret = bq25890_field_write(bq, F_OTG_CFG, 0); |
| 697 | if (ret < 0) |
| 698 | goto error; |
| 699 | |
| 700 | power_supply_changed(bq->charger); |
| 701 | break; |
| 702 | } |
| 703 | |
| 704 | return; |
| 705 | |
| 706 | error: |
| 707 | dev_err(bq->dev, "Error switching to boost/charger mode.\n"); |
| 708 | } |
| 709 | |
| 710 | static int bq25890_usb_notifier(struct notifier_block *nb, unsigned long val, |
| 711 | void *priv) |
| 712 | { |
| 713 | struct bq25890_device *bq = |
| 714 | container_of(nb, struct bq25890_device, usb_nb); |
| 715 | |
| 716 | bq->usb_event = val; |
| 717 | queue_work(system_power_efficient_wq, &bq->usb_work); |
| 718 | |
| 719 | return NOTIFY_OK; |
| 720 | } |
| 721 | |
| 722 | static int bq25890_irq_probe(struct bq25890_device *bq) |
| 723 | { |
Laurentiu Palcu | 4aeae9c | 2015-05-19 16:24:40 +0300 | [diff] [blame] | 724 | struct gpio_desc *irq; |
| 725 | |
Uwe Kleine-König | 0007fa3 | 2015-06-12 09:19:34 +0200 | [diff] [blame] | 726 | irq = devm_gpiod_get_index(bq->dev, BQ25890_IRQ_PIN, 0, GPIOD_IN); |
Laurentiu Palcu | 4aeae9c | 2015-05-19 16:24:40 +0300 | [diff] [blame] | 727 | if (IS_ERR(irq)) { |
| 728 | dev_err(bq->dev, "Could not probe irq pin.\n"); |
| 729 | return PTR_ERR(irq); |
| 730 | } |
| 731 | |
Laurentiu Palcu | 4aeae9c | 2015-05-19 16:24:40 +0300 | [diff] [blame] | 732 | return gpiod_to_irq(irq); |
| 733 | } |
| 734 | |
| 735 | static int bq25890_fw_read_u32_props(struct bq25890_device *bq) |
| 736 | { |
| 737 | int ret; |
| 738 | u32 property; |
| 739 | int i; |
| 740 | struct bq25890_init_data *init = &bq->init_data; |
| 741 | struct { |
| 742 | char *name; |
| 743 | bool optional; |
| 744 | enum bq25890_table_ids tbl_id; |
| 745 | u8 *conv_data; /* holds converted value from given property */ |
| 746 | } props[] = { |
| 747 | /* required properties */ |
| 748 | {"ti,charge-current", false, TBL_ICHG, &init->ichg}, |
| 749 | {"ti,battery-regulation-voltage", false, TBL_VREG, &init->vreg}, |
| 750 | {"ti,termination-current", false, TBL_ITERM, &init->iterm}, |
| 751 | {"ti,precharge-current", false, TBL_ITERM, &init->iprechg}, |
| 752 | {"ti,minimum-sys-voltage", false, TBL_SYSVMIN, &init->sysvmin}, |
| 753 | {"ti,boost-voltage", false, TBL_BOOSTV, &init->boostv}, |
| 754 | {"ti,boost-max-current", false, TBL_BOOSTI, &init->boosti}, |
| 755 | |
| 756 | /* optional properties */ |
| 757 | {"ti,thermal-regulation-threshold", true, TBL_TREG, &init->treg} |
| 758 | }; |
| 759 | |
| 760 | /* initialize data for optional properties */ |
| 761 | init->treg = 3; /* 120 degrees Celsius */ |
| 762 | |
| 763 | for (i = 0; i < ARRAY_SIZE(props); i++) { |
| 764 | ret = device_property_read_u32(bq->dev, props[i].name, |
| 765 | &property); |
| 766 | if (ret < 0) { |
| 767 | if (props[i].optional) |
| 768 | continue; |
| 769 | |
| 770 | return ret; |
| 771 | } |
| 772 | |
| 773 | *props[i].conv_data = bq25890_find_idx(property, |
| 774 | props[i].tbl_id); |
| 775 | } |
| 776 | |
| 777 | return 0; |
| 778 | } |
| 779 | |
| 780 | static int bq25890_fw_probe(struct bq25890_device *bq) |
| 781 | { |
| 782 | int ret; |
| 783 | struct bq25890_init_data *init = &bq->init_data; |
| 784 | |
| 785 | ret = bq25890_fw_read_u32_props(bq); |
| 786 | if (ret < 0) |
| 787 | return ret; |
| 788 | |
| 789 | init->ilim_en = device_property_read_bool(bq->dev, "ti,use-ilim-pin"); |
| 790 | init->boostf = device_property_read_bool(bq->dev, "ti,boost-low-freq"); |
| 791 | |
| 792 | return 0; |
| 793 | } |
| 794 | |
| 795 | static int bq25890_probe(struct i2c_client *client, |
| 796 | const struct i2c_device_id *id) |
| 797 | { |
| 798 | struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); |
| 799 | struct device *dev = &client->dev; |
| 800 | struct bq25890_device *bq; |
| 801 | int ret; |
| 802 | int i; |
| 803 | |
| 804 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { |
| 805 | dev_err(dev, "No support for SMBUS_BYTE_DATA\n"); |
| 806 | return -ENODEV; |
| 807 | } |
| 808 | |
| 809 | bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL); |
| 810 | if (!bq) |
| 811 | return -ENOMEM; |
| 812 | |
| 813 | bq->client = client; |
| 814 | bq->dev = dev; |
| 815 | |
| 816 | mutex_init(&bq->lock); |
| 817 | |
| 818 | bq->rmap = devm_regmap_init_i2c(client, &bq25890_regmap_config); |
| 819 | if (IS_ERR(bq->rmap)) { |
| 820 | dev_err(dev, "failed to allocate register map\n"); |
| 821 | return PTR_ERR(bq->rmap); |
| 822 | } |
| 823 | |
| 824 | for (i = 0; i < ARRAY_SIZE(bq25890_reg_fields); i++) { |
| 825 | const struct reg_field *reg_fields = bq25890_reg_fields; |
| 826 | |
| 827 | bq->rmap_fields[i] = devm_regmap_field_alloc(dev, bq->rmap, |
| 828 | reg_fields[i]); |
| 829 | if (IS_ERR(bq->rmap_fields[i])) { |
| 830 | dev_err(dev, "cannot allocate regmap field\n"); |
| 831 | return PTR_ERR(bq->rmap_fields[i]); |
| 832 | } |
| 833 | } |
| 834 | |
| 835 | i2c_set_clientdata(client, bq); |
| 836 | |
| 837 | bq->chip_id = bq25890_field_read(bq, F_PN); |
| 838 | if (bq->chip_id < 0) { |
| 839 | dev_err(dev, "Cannot read chip ID.\n"); |
Laurentiu Palcu | 23fa43a | 2015-06-02 13:36:51 +0300 | [diff] [blame] | 840 | return bq->chip_id; |
Laurentiu Palcu | 4aeae9c | 2015-05-19 16:24:40 +0300 | [diff] [blame] | 841 | } |
| 842 | |
| 843 | if (bq->chip_id != BQ25890_ID) { |
| 844 | dev_err(dev, "Chip with ID=%d, not supported!\n", bq->chip_id); |
| 845 | return -ENODEV; |
| 846 | } |
| 847 | |
| 848 | if (!dev->platform_data) { |
| 849 | ret = bq25890_fw_probe(bq); |
| 850 | if (ret < 0) { |
| 851 | dev_err(dev, "Cannot read device properties.\n"); |
| 852 | return ret; |
| 853 | } |
| 854 | } else { |
| 855 | return -ENODEV; |
| 856 | } |
| 857 | |
| 858 | ret = bq25890_hw_init(bq); |
| 859 | if (ret < 0) { |
| 860 | dev_err(dev, "Cannot initialize the chip.\n"); |
| 861 | return ret; |
| 862 | } |
| 863 | |
| 864 | if (client->irq <= 0) |
| 865 | client->irq = bq25890_irq_probe(bq); |
| 866 | |
| 867 | if (client->irq < 0) { |
| 868 | dev_err(dev, "No irq resource found.\n"); |
| 869 | return client->irq; |
| 870 | } |
| 871 | |
| 872 | /* OTG reporting */ |
| 873 | bq->usb_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); |
| 874 | if (!IS_ERR_OR_NULL(bq->usb_phy)) { |
| 875 | INIT_WORK(&bq->usb_work, bq25890_usb_work); |
| 876 | bq->usb_nb.notifier_call = bq25890_usb_notifier; |
| 877 | usb_register_notifier(bq->usb_phy, &bq->usb_nb); |
| 878 | } |
| 879 | |
| 880 | ret = devm_request_threaded_irq(dev, client->irq, NULL, |
| 881 | bq25890_irq_handler_thread, |
| 882 | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| 883 | BQ25890_IRQ_PIN, bq); |
| 884 | if (ret) |
| 885 | goto irq_fail; |
| 886 | |
| 887 | ret = bq25890_power_supply_init(bq); |
| 888 | if (ret < 0) { |
| 889 | dev_err(dev, "Failed to register power supply\n"); |
| 890 | goto irq_fail; |
| 891 | } |
| 892 | |
| 893 | return 0; |
| 894 | |
| 895 | irq_fail: |
| 896 | if (!IS_ERR_OR_NULL(bq->usb_phy)) |
| 897 | usb_unregister_notifier(bq->usb_phy, &bq->usb_nb); |
| 898 | |
| 899 | return ret; |
| 900 | } |
| 901 | |
| 902 | static int bq25890_remove(struct i2c_client *client) |
| 903 | { |
| 904 | struct bq25890_device *bq = i2c_get_clientdata(client); |
| 905 | |
| 906 | power_supply_unregister(bq->charger); |
| 907 | |
| 908 | if (!IS_ERR_OR_NULL(bq->usb_phy)) |
| 909 | usb_unregister_notifier(bq->usb_phy, &bq->usb_nb); |
| 910 | |
| 911 | /* reset all registers to default values */ |
| 912 | bq25890_chip_reset(bq); |
| 913 | |
| 914 | return 0; |
| 915 | } |
| 916 | |
| 917 | #ifdef CONFIG_PM_SLEEP |
| 918 | static int bq25890_suspend(struct device *dev) |
| 919 | { |
| 920 | struct bq25890_device *bq = dev_get_drvdata(dev); |
| 921 | |
| 922 | /* |
| 923 | * If charger is removed, while in suspend, make sure ADC is diabled |
| 924 | * since it consumes slightly more power. |
| 925 | */ |
| 926 | return bq25890_field_write(bq, F_CONV_START, 0); |
| 927 | } |
| 928 | |
| 929 | static int bq25890_resume(struct device *dev) |
| 930 | { |
| 931 | int ret; |
| 932 | struct bq25890_state state; |
| 933 | struct bq25890_device *bq = dev_get_drvdata(dev); |
| 934 | |
| 935 | ret = bq25890_get_chip_state(bq, &state); |
| 936 | if (ret < 0) |
| 937 | return ret; |
| 938 | |
| 939 | mutex_lock(&bq->lock); |
| 940 | bq->state = state; |
| 941 | mutex_unlock(&bq->lock); |
| 942 | |
| 943 | /* Re-enable ADC only if charger is plugged in. */ |
| 944 | if (state.online) { |
| 945 | ret = bq25890_field_write(bq, F_CONV_START, 1); |
| 946 | if (ret < 0) |
| 947 | return ret; |
| 948 | } |
| 949 | |
| 950 | /* signal userspace, maybe state changed while suspended */ |
| 951 | power_supply_changed(bq->charger); |
| 952 | |
| 953 | return 0; |
| 954 | } |
| 955 | #endif |
| 956 | |
| 957 | static const struct dev_pm_ops bq25890_pm = { |
| 958 | SET_SYSTEM_SLEEP_PM_OPS(bq25890_suspend, bq25890_resume) |
| 959 | }; |
| 960 | |
| 961 | static const struct i2c_device_id bq25890_i2c_ids[] = { |
| 962 | { "bq25890", 0 }, |
| 963 | {}, |
| 964 | }; |
| 965 | MODULE_DEVICE_TABLE(i2c, bq25890_i2c_ids); |
| 966 | |
| 967 | static const struct of_device_id bq25890_of_match[] = { |
| 968 | { .compatible = "ti,bq25890", }, |
| 969 | { }, |
| 970 | }; |
| 971 | MODULE_DEVICE_TABLE(of, bq25890_of_match); |
| 972 | |
| 973 | static const struct acpi_device_id bq25890_acpi_match[] = { |
| 974 | {"BQ258900", 0}, |
| 975 | {}, |
| 976 | }; |
| 977 | MODULE_DEVICE_TABLE(acpi, bq25890_acpi_match); |
| 978 | |
| 979 | static struct i2c_driver bq25890_driver = { |
| 980 | .driver = { |
| 981 | .name = "bq25890-charger", |
| 982 | .of_match_table = of_match_ptr(bq25890_of_match), |
| 983 | .acpi_match_table = ACPI_PTR(bq25890_acpi_match), |
| 984 | .pm = &bq25890_pm, |
| 985 | }, |
| 986 | .probe = bq25890_probe, |
| 987 | .remove = bq25890_remove, |
| 988 | .id_table = bq25890_i2c_ids, |
| 989 | }; |
| 990 | module_i2c_driver(bq25890_driver); |
| 991 | |
| 992 | MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>"); |
| 993 | MODULE_DESCRIPTION("bq25890 charger driver"); |
| 994 | MODULE_LICENSE("GPL"); |