Gitiles
Code Review
Sign In
gerrit-public.fairphone.software
/
kernel
/
msm-4.19
/
2feceeff1e771850e49f9074307f071964fd9e3e
/
drivers
/
scsi
/
qla2xxx
284901a
dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)
by Yang Hongyang
· 16 years ago
6a35528
dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)
by Yang Hongyang
· 16 years ago
c59c614
[SCSI] qla2xxx: Update version number to 8.03.01-k1.
by Andrew Vasquez
· 16 years ago
79c13a7
[SCSI] qla2xxx: Get FLT address in dword format.
by Harish Zunjarrao
· 16 years ago
b9b12f7
[SCSI] qla2xxx: Correct several PCI-EEH issues.
by Seokmann Ju
· 16 years ago
6749ce3
[SCSI] qla2xxx: Don't cache VPD data for newer ISPs.
by Andrew Vasquez
· 16 years ago
24a0813
[SCSI] qla2xxx: Explicitly set the execution-throttle with recent ISPs.
by Andrew Vasquez
· 16 years ago
d743de6
[SCSI] qla2xxx: Reduce request queue-size overhead with recent ISPs.
by Andrew Vasquez
· 16 years ago
3d79038f
[SCSI] qla2xxx: Always use an FLT's NVRAM/VPD region information.
by Andrew Vasquez
· 16 years ago
d1b1bef
[SCSI] qla2xxx: Drop use of IRQF_DISABLE.
by Giridhar Malavali
· 16 years ago
ad0ecd6
[SCSI] qla2xxx: Add EDC-update support.
by Joe Carnuccio
· 16 years ago
fbcbb5d
[SCSI] qla2xxx: Export flash-block-size for application support.
by Lalit Chandivade
· 16 years ago
ddb9b12
[SCSI] qla2xxx: Cleanup unused flags and #defines.
by Shyam Sundar
· 16 years ago
d0c3eef
[SCSI] qla2xxx: Remove implicit ISP-abort after a flash update.
by Lalit Chandivade
· 16 years ago
6e181be
[SCSI] qla2xxx: Add reset capabilities for application support.
by Lalit Chandivade
· 16 years ago
2533cf6
[SCSI] qla2xxx: Correct ISP abort semantics for NVRAM, VPD, and flash update.
by Lalit Chandivade
· 16 years ago
1d2874d
[SCSI] qla2xxx: Add Flash-Access-Control support for recent ISPs.
by Joe Carnuccio
· 16 years ago
b997876
[SCSI] qla2xxx: Ensure the timer and DPC routines complete prior to midlayer tear-down.
by Andrew Vasquez
· 16 years ago
e612d46
[SCSI] qla2xxx: Correct abort-semantics in qla2x00_abort_all_cmds().
by Andrew Vasquez
· 16 years ago
55a9615
[SCSI] qla2xxx: Update MPI/PHY version retrieval codes.
by Andrew Vasquez
· 16 years ago
be67e65
[SCSI] qla2xxx: Preserve an fcport's loop-id after terminate_rport_io().
by Andrew Vasquez
· 16 years ago
b64b0e8
[SCSI] qla2xxx: Pass in optional extended-initialization control block.
by Andrew Vasquez
· 16 years ago
dda772e
[SCSI] qla2xxx: Always (re)read firmware version/capabilities information.
by Andrew Vasquez
· 16 years ago
6315a5f
[SCSI] qla2xxx: Use byte-address while reading FC boot code versions from flash.
by Harish Zunjarrao
· 16 years ago
7d9dade
[SCSI] qla2xxx: Correct over-allocation of firmware-dump buffer.
by Giridhar Malavali
· 16 years ago
94279ed
[SCSI] qla2xxx: Initialize FCE debugfs codes with the proper vha structure.
by Giridhar Malavali
· 16 years ago
a5326f8
[SCSI] qla2xxx: Consolidate queuecommand implementations.
by Giridhar Malavali
· 16 years ago
0802999
[SCSI] qla2xxx: Refactor request/response-queue register handling.
by Andrew Vasquez
· 16 years ago
5fa0ae1
[SCSI] qla2xxx: Update version number to 8.03.00-k4.
by Andrew Vasquez
· 16 years ago
ca42f2b
[SCSI] qla2xxx: Correct overwrite of pre-assigned init-control-block structure size.
by Andrew Vasquez
· 16 years ago
c6b2fca
[SCSI] qla2xxx: Correct truncation in return-code status checking.
by Andrew Vasquez
· 16 years ago
ee546b6
[SCSI] qla2xxx: Correct vport delete bug.
by Anirban Chakraborty
· 16 years ago
605aa2b
[SCSI] qla2xxx: Use correct value for max vport in LOOP topology.
by Lalit Chandivade
· 16 years ago
6431c5d
[SCSI] qla2xxx: Correct address range checking for option-rom updates.
by Andrew Vasquez
· 16 years ago
822c05b
[SCSI] qla2xxx: Update version number to 8.03.00-k3.
by Andrew Vasquez
· 16 years ago
9088608
[SCSI] qla2xxx: Mask out 'reserved' bits while processing FLT regions.
by Andrew Vasquez
· 16 years ago
cf5a163
[SCSI] qla2xxx: Correct slab-error overwrite during vport creation and deletion.
by Anirban Chakraborty
· 16 years ago
8a65957
[SCSI] qla2xxx: Properly acknowledge IDC notification messages.
by Andrew Vasquez
· 16 years ago
618a752
[SCSI] qla2xxx: Remove interrupt request bit check in the response processing path in multiq mode.
by Anirban Chakraborty
· 16 years ago
7f977dd
[SCSI] qla2xxx: fix Kernel Panic with Qlogic 2472 Card.
by Shyam_Iyer@Dell.com
· 16 years ago
f9932de
[SCSI] qla2xxx: Update version number to 8.03.00-k2.
by Andrew Vasquez
· 16 years ago
3c01b4f
[SCSI] qla2xxx: Add checks for a valid fcport in dev-loss-tmo/terminate_rport_io callbacks.
by Seokmann Ju
· 16 years ago
53303c4
[SCSI] qla2xxx: Correct regression in DMA-mask setting prior to allocations.
by Andrew Vasquez
· 16 years ago
b872ca4
[SCSI] qla2xxx: Correct descriptions in flash manipulation routines.
by Joe Carnuccio
· 16 years ago
2ac4b64
[SCSI] qla2xxx: Correct regression in EH abort handling.
by Andrew Vasquez
· 16 years ago
7c28317
[SCSI] qla2xxx: Correct endianness issue during flash manipulation.
by Andrew Vasquez
· 16 years ago
ad038fa
[SCSI] qla2xxx: Correct MSI-X vector allocation for single queue mode.
by Lalit Chandivade
· 16 years ago
eaac30b
[SCSI] qla2xxx: Modify firmware-load order precedence for ISP81XX parts.
by Andrew Vasquez
· 16 years ago
8eca3f3
[SCSI] qla2xxx: Always serialize mailbox command execution.
by Andrew Vasquez
· 16 years ago
09ff36d
[SCSI] qla2xxx: Ensure RISC-interrupt-enabled consistency for IS_NOPOLLING_TYPE() ISPs.
by Andrew Vasquez
· 16 years ago
85d0acb
[SCSI] qla2xxx: Simplify sector-mask calculation in preparation for larger flash parts.
by Andrew Vasquez
· 16 years ago
6e9f21f
[SCSI] qla2xxx: Fix memory leak in error path
by Anirban Chakraborty
· 16 years ago
29bdccb
[SCSI] qla2xxx: Fix ISP restart bug in multiq code
by Anirban Chakraborty
· 16 years ago
ffda8c7
[SCSI] qla2xxx: Update version number to 8.03.00-k1.
by Andrew Vasquez
· 16 years ago
3a03eb7
[SCSI] qla2xxx: Add ISP81XX support.
by Andrew Vasquez
· 16 years ago
444786d
[SCSI] qla2xxx: Use proper request/response queues with MQ instantiations.
by Andrew Vasquez
· 16 years ago
d63ab53
[SCSI] qla2xxx: Correct MQ-chain information retrieval during a firmware dump.
by Andrew Vasquez
· 16 years ago
bb99de6
[SCSI] qla2xxx: Collapse EFT/FCE copy procedures during a firmware dump.
by Andrew Vasquez
· 16 years ago
3fd67cd
[SCSI] qla2xxx: Don't pollute kernel logs with ZIO/RIO status messages.
by Andrew Vasquez
· 16 years ago
124f85e
[SCSI] qla2xxx: Don't fallback to interrupt-polling during re-initialization with MSI-X enabled.
by Andrew Vasquez
· 16 years ago
1ded85e
[SCSI] qla2xxx: Remove support for reading/writing HW-event-log.
by Andrew Vasquez
· 16 years ago
17d9863
[SCSI] qla2xxx: changes in multiq code
by Anirban Chakraborty
· 16 years ago
73208df
[SCSI] qla2xxx: add support for multi-queue adapter
by Anirban Chakraborty
· 16 years ago
749af3d
[SCSI] qla2xxx: Code changes for vport bus reset
by Anirban Chakraborty
· 16 years ago
c51da4e
[SCSI] qla2xxx: Fix for build warning
by Anirban Chakraborty
· 16 years ago
e315cd2
[SCSI] qla2xxx: Code changes for qla data structure refactoring
by Anirban Chakraborty
· 16 years ago
7b867cf
[SCSI] qla2xxx: Refactor qla data structures
by Anirban Chakraborty
· 16 years ago
3869a17
[SCSI] qla2xxx: Update version number to 8.02.01-k9.
by Andrew Vasquez
· 16 years ago
5bff55d
[SCSI] qla2xxx: Return a FAILED status when abort mailbox-command fails.
by Michael Reed
· 16 years ago
680d7db
[SCSI] qla2xxx: Do not honour max_vports from firmware for 2G ISPs and below.
by Shyam Sundar
· 16 years ago
737faec
[SCSI] qla2xxx: Use pci_disable_rom() to manipulate PCI config space.
by Andrew Vasquez
· 16 years ago
821b399
[SCSI] qla2xxx: Correct Atmel flash-part handling.
by Lalit Chandivade
· 16 years ago
0927678
PCI: use pci_find_ext_capability everywhere
by Jesse Barnes
· 16 years ago
16dbef4
PCI: change MSI-x vector to 32bit
by Yinghai Lu
· 16 years ago
056a448
[SCSI] qla2xxx: use new host byte transport errors.
by Mike Christie
· 16 years ago
9cc328f
[SCSI] ibmvfc, qla2xxx, lpfc: remove scsi_target_unblock calls in terminate callbacks
by Mike Christie
· 16 years ago
7b59413
[SCSI] qla2xxx: return SCSI_MLQUEUE_TARGET_BUSY when driver has detected rport error or race
by Mike Christie
· 16 years ago
4a3e1ea
[SCSI] qla2xxx: fix printk format warnings
by Alexander Beregalov
· 16 years ago
36d1cdc
[SCSI] qla2xxx: Update version number to 8.02.01-k8.
by Andrew Vasquez
· 16 years ago
59d72d8
[SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing.
by Ravi Anand
· 16 years ago
2d13693
[SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling.
by Andrew Vasquez
· 16 years ago
cc3ef7b
[SCSI] qla2xxx: Fix "occured" spelling errors.
by Bjorn Helgaas
· 16 years ago
272976c
[SCSI] qla2xxx: Add NPIV-Config Table support.
by Andrew Vasquez
· 16 years ago
c00d899
[SCSI] qla2xxx: Add Flash Layout Table support.
by Andrew Vasquez
· 16 years ago
4b89258
[SCSI] qla2xxx: Change GFP_ATOMIC to GFP_KERNEL for non-atomic allocations.
by Andrew Vasquez
· 16 years ago
49fd462
[SCSI] qla2xxx: Add input/output byte-count statistics.
by Harish Zunjarrao
· 16 years ago
3fd7f93
[SCSI] qla2xxx: Remove semaphore.h
by Matthew Wilcox
· 16 years ago
048feec
[SCSI] qla2xxx: Defer enablement of RISC interrupts until ISP initialization completes.
by Andrew Vasquez
· 16 years ago
7a8fc9b
removed unused #include <linux/version.h>'s
by Adrian Bunk
· 16 years ago
bcd2361
[SCSI] qla2xxx: Update version number to 8.02.01-k7.
by Andrew Vasquez
· 16 years ago
c795c1e
[SCSI] qla2xxx: Explicitly tear-down vports during PCI remove_one().
by Andrew Vasquez
· 16 years ago
19851f1
[SCSI] qla2xxx: Reference proper ha during SBR handling.
by Andrew Vasquez
· 16 years ago
946fb89
[SCSI] qla2xxx: Set npiv_supported flag for FCoE HBAs.
by Mike Hernandez
· 16 years ago
bed475c
[SCSI] qla2xxx: Don't leak SG-DMA mappings while aborting commands.
by Andrew Vasquez
· 16 years ago
a7a2850
[SCSI] qla2xxx: Correct vport-state management issues during ISP-ABORT.
by Andrew Vasquez
· 16 years ago
6390d1f
[SCSI] qla2xxx: Correct synchronization of software/firmware fcport states.
by Andrew Vasquez
· 16 years ago
00eabe7
[SCSI] qla2xxx: fix msleep compile error
by FUJITA Tomonori
· 16 years ago
4cfc510
[SCSI] qla2xxx: Update version number to 8.02.01-k6.
by Andrew Vasquez
· 16 years ago
c9c5ced
[SCSI] qla2xxx: Additional NPIV corrections.
by Andrew Vasquez
· 16 years ago
bf6583b
[SCSI] qla2xxx: suppress uninitialized-var warning
by Andrew Morton
· 16 years ago
Next »