ARM: S5P: Add platform helpers for camera GPIO configuration
Add functions for configuration of the parallel camera
bus pins on S5PV210 and Exynos4 SoC.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 82195a9..8d7398f 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -76,6 +76,11 @@
help
Common setup code for SDHCI gpio.
+config EXYNOS4_SETUP_FIMC
+ bool
+ help
+ Common setup code for the camera interfaces.
+
# machine support
menu "EXYNOS4 Machines"
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index 56e367b..69a4a28 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -41,6 +41,7 @@
obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o
obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o
+obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o
diff --git a/arch/arm/mach-exynos4/setup-fimc.c b/arch/arm/mach-exynos4/setup-fimc.c
new file mode 100644
index 0000000..6a45078
--- /dev/null
+++ b/arch/arm/mach-exynos4/setup-fimc.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * Exynos4 camera interface GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+#include <plat/camport.h>
+
+int exynos4_fimc_setup_gpio(enum s5p_camport_id id)
+{
+ u32 gpio8, gpio5;
+ u32 sfn;
+ int ret;
+
+ switch (id) {
+ case S5P_CAMPORT_A:
+ gpio8 = EXYNOS4_GPJ0(0); /* PCLK, VSYNC, HREF, DATA[0:4] */
+ gpio5 = EXYNOS4_GPJ1(0); /* DATA[5:7], CLKOUT, FIELD */
+ sfn = S3C_GPIO_SFN(2);
+ break;
+
+ case S5P_CAMPORT_B:
+ gpio8 = EXYNOS4_GPE0(0); /* DATA[0:7] */
+ gpio5 = EXYNOS4_GPE1(0); /* PCLK, VSYNC, HREF, CLKOUT, FIELD */
+ sfn = S3C_GPIO_SFN(3);
+ break;
+
+ default:
+ WARN(1, "Wrong camport id: %d\n", id);
+ return -EINVAL;
+ }
+
+ ret = s3c_gpio_cfgall_range(gpio8, 8, sfn, S3C_GPIO_PULL_UP);
+ if (ret)
+ return ret;
+
+ return s3c_gpio_cfgall_range(gpio5, 5, sfn, S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index d7fd031..7f015bb 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -53,6 +53,11 @@
help
Common setup code for SDHCI gpio.
+config S5PV210_SETUP_FIMC
+ bool
+ help
+ Common setup code for the camera interfaces.
+
menu "S5PC110 Machines"
config MACH_AQUILA
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index ff1a0db..11f1790 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -31,6 +31,7 @@
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S5PV210_SETUP_FIMC) += setup-fimc.o
obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o
obj-$(CONFIG_S5PV210_SETUP_IDE) += setup-ide.o
diff --git a/arch/arm/mach-s5pv210/setup-fimc.c b/arch/arm/mach-s5pv210/setup-fimc.c
new file mode 100644
index 0000000..54cc5b11
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-fimc.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5PV210 camera interface GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+#include <plat/camport.h>
+
+int s5pv210_fimc_setup_gpio(enum s5p_camport_id id)
+{
+ u32 gpio8, gpio5;
+ int ret;
+
+ switch (id) {
+ case S5P_CAMPORT_A:
+ gpio8 = S5PV210_GPE0(0);
+ gpio5 = S5PV210_GPE1(0);
+ break;
+
+ case S5P_CAMPORT_B:
+ gpio8 = S5PV210_GPJ0(0);
+ gpio5 = S5PV210_GPJ1(0);
+ break;
+
+ default:
+ WARN(1, "Wrong camport id: %d\n", id);
+ return -EINVAL;
+ }
+
+ ret = s3c_gpio_cfgall_range(gpio8, 8, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_UP);
+ if (ret)
+ return ret;
+
+ return s3c_gpio_cfgall_range(gpio5, 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/plat-s5p/include/plat/camport.h b/arch/arm/plat-s5p/include/plat/camport.h
new file mode 100644
index 0000000..71688c8
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/camport.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series camera interface helper functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef PLAT_S5P_CAMPORT_H_
+#define PLAT_S5P_CAMPORT_H_ __FILE__
+
+enum s5p_camport_id {
+ S5P_CAMPORT_A,
+ S5P_CAMPORT_B,
+};
+
+/*
+ * The helper functions to configure GPIO for the camera parallel bus.
+ * The camera port can be multiplexed with any FIMC entity, even multiple
+ * FIMC entities are allowed to be attached to a single port simultaneously.
+ * These functions are to be used in the board setup code.
+ */
+int s5pv210_fimc_setup_gpio(enum s5p_camport_id id);
+int exynos4_fimc_setup_gpio(enum s5p_camport_id id);
+
+#endif