cpufreq: Tegra: implement intermediate frequency callbacks
Tegra has been switching to intermediate frequency (pll_p_clk) forever.
CPUFreq core has better support for handling notifications for these
frequencies and so we can adapt Tegra's driver to it.
Also do a WARN() if clk_set_parent() fails while moving back to pll_x
as we should have atleast restored to earlier frequency on error.
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c
index 6e774c6..a5fbc0a 100644
--- a/drivers/cpufreq/tegra-cpufreq.c
+++ b/drivers/cpufreq/tegra-cpufreq.c
@@ -45,46 +45,51 @@
static struct clk *pll_x_clk;
static struct clk *pll_p_clk;
static struct clk *emc_clk;
+static bool pll_x_prepared;
-static int tegra_cpu_clk_set_rate(unsigned long rate)
+static unsigned int tegra_get_intermediate(struct cpufreq_policy *policy,
+ unsigned int index)
+{
+ unsigned int ifreq = clk_get_rate(pll_p_clk) / 1000;
+
+ /*
+ * Don't switch to intermediate freq if:
+ * - we are already at it, i.e. policy->cur == ifreq
+ * - index corresponds to ifreq
+ */
+ if ((freq_table[index].frequency == ifreq) || (policy->cur == ifreq))
+ return 0;
+
+ return ifreq;
+}
+
+static int tegra_target_intermediate(struct cpufreq_policy *policy,
+ unsigned int index)
{
int ret;
/*
* Take an extra reference to the main pll so it doesn't turn
- * off when we move the cpu off of it
+ * off when we move the cpu off of it as enabling it again while we
+ * switch to it from tegra_target() would take additional time. Though
+ * when target-freq is intermediate freq, we don't need to take this
+ * reference.
*/
clk_prepare_enable(pll_x_clk);
ret = clk_set_parent(cpu_clk, pll_p_clk);
- if (ret) {
- pr_err("Failed to switch cpu to clock pll_p\n");
- goto out;
- }
+ if (ret)
+ clk_disable_unprepare(pll_x_clk);
+ else
+ pll_x_prepared = true;
- if (rate == clk_get_rate(pll_p_clk))
- goto out;
-
- ret = clk_set_rate(pll_x_clk, rate);
- if (ret) {
- pr_err("Failed to change pll_x to %lu\n", rate);
- goto out;
- }
-
- ret = clk_set_parent(cpu_clk, pll_x_clk);
- if (ret) {
- pr_err("Failed to switch cpu to clock pll_x\n");
- goto out;
- }
-
-out:
- clk_disable_unprepare(pll_x_clk);
return ret;
}
static int tegra_target(struct cpufreq_policy *policy, unsigned int index)
{
unsigned long rate = freq_table[index].frequency;
+ unsigned int ifreq = clk_get_rate(pll_p_clk) / 1000;
int ret = 0;
/*
@@ -98,10 +103,30 @@
else
clk_set_rate(emc_clk, 100000000); /* emc 50Mhz */
- ret = tegra_cpu_clk_set_rate(rate * 1000);
+ /*
+ * target freq == pll_p, don't need to take extra reference to pll_x_clk
+ * as it isn't used anymore.
+ */
+ if (rate == ifreq)
+ return clk_set_parent(cpu_clk, pll_p_clk);
+
+ ret = clk_set_rate(pll_x_clk, rate * 1000);
+ /* Restore to earlier frequency on error, i.e. pll_x */
if (ret)
- pr_err("cpu-tegra: Failed to set cpu frequency to %lu kHz\n",
- rate);
+ pr_err("Failed to change pll_x to %lu\n", rate);
+
+ ret = clk_set_parent(cpu_clk, pll_x_clk);
+ /* This shouldn't fail while changing or restoring */
+ WARN_ON(ret);
+
+ /*
+ * Drop count to pll_x clock only if we switched to intermediate freq
+ * earlier while transitioning to a target frequency.
+ */
+ if (pll_x_prepared) {
+ clk_disable_unprepare(pll_x_clk);
+ pll_x_prepared = false;
+ }
return ret;
}
@@ -137,16 +162,18 @@
}
static struct cpufreq_driver tegra_cpufreq_driver = {
- .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
- .verify = cpufreq_generic_frequency_table_verify,
- .target_index = tegra_target,
- .get = cpufreq_generic_get,
- .init = tegra_cpu_init,
- .exit = tegra_cpu_exit,
- .name = "tegra",
- .attr = cpufreq_generic_attr,
+ .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+ .verify = cpufreq_generic_frequency_table_verify,
+ .get_intermediate = tegra_get_intermediate,
+ .target_intermediate = tegra_target_intermediate,
+ .target_index = tegra_target,
+ .get = cpufreq_generic_get,
+ .init = tegra_cpu_init,
+ .exit = tegra_cpu_exit,
+ .name = "tegra",
+ .attr = cpufreq_generic_attr,
#ifdef CONFIG_PM
- .suspend = cpufreq_generic_suspend,
+ .suspend = cpufreq_generic_suspend,
#endif
};