| /* |
| * Synopsys DesignWare Multimedia Card Interface driver |
| * (Based on NXP driver for lpc 31xx) |
| * |
| * Copyright (C) 2009 NXP Semiconductors |
| * Copyright (C) 2009, 2010 Imagination Technologies Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/blkdev.h> |
| #include <linux/clk.h> |
| #include <linux/debugfs.h> |
| #include <linux/device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/seq_file.h> |
| #include <linux/slab.h> |
| #include <linux/stat.h> |
| #include <linux/delay.h> |
| #include <linux/irq.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/mmc.h> |
| #include <linux/mmc/dw_mmc.h> |
| #include <linux/bitops.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/workqueue.h> |
| |
| #include "dw_mmc.h" |
| |
| /* Common flag combinations */ |
| #define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DTO | SDMMC_INT_DCRC | \ |
| SDMMC_INT_HTO | SDMMC_INT_SBE | \ |
| SDMMC_INT_EBE) |
| #define DW_MCI_CMD_ERROR_FLAGS (SDMMC_INT_RTO | SDMMC_INT_RCRC | \ |
| SDMMC_INT_RESP_ERR) |
| #define DW_MCI_ERROR_FLAGS (DW_MCI_DATA_ERROR_FLAGS | \ |
| DW_MCI_CMD_ERROR_FLAGS | SDMMC_INT_HLE) |
| #define DW_MCI_SEND_STATUS 1 |
| #define DW_MCI_RECV_STATUS 2 |
| #define DW_MCI_DMA_THRESHOLD 16 |
| |
| #ifdef CONFIG_MMC_DW_IDMAC |
| struct idmac_desc { |
| u32 des0; /* Control Descriptor */ |
| #define IDMAC_DES0_DIC BIT(1) |
| #define IDMAC_DES0_LD BIT(2) |
| #define IDMAC_DES0_FD BIT(3) |
| #define IDMAC_DES0_CH BIT(4) |
| #define IDMAC_DES0_ER BIT(5) |
| #define IDMAC_DES0_CES BIT(30) |
| #define IDMAC_DES0_OWN BIT(31) |
| |
| u32 des1; /* Buffer sizes */ |
| #define IDMAC_SET_BUFFER1_SIZE(d, s) \ |
| ((d)->des1 = ((d)->des1 & 0x03ffe000) | ((s) & 0x1fff)) |
| |
| u32 des2; /* buffer 1 physical address */ |
| |
| u32 des3; /* buffer 2 physical address */ |
| }; |
| #endif /* CONFIG_MMC_DW_IDMAC */ |
| |
| /** |
| * struct dw_mci_slot - MMC slot state |
| * @mmc: The mmc_host representing this slot. |
| * @host: The MMC controller this slot is using. |
| * @ctype: Card type for this slot. |
| * @mrq: mmc_request currently being processed or waiting to be |
| * processed, or NULL when the slot is idle. |
| * @queue_node: List node for placing this node in the @queue list of |
| * &struct dw_mci. |
| * @clock: Clock rate configured by set_ios(). Protected by host->lock. |
| * @flags: Random state bits associated with the slot. |
| * @id: Number of this slot. |
| * @last_detect_state: Most recently observed card detect state. |
| */ |
| struct dw_mci_slot { |
| struct mmc_host *mmc; |
| struct dw_mci *host; |
| |
| u32 ctype; |
| |
| struct mmc_request *mrq; |
| struct list_head queue_node; |
| |
| unsigned int clock; |
| unsigned long flags; |
| #define DW_MMC_CARD_PRESENT 0 |
| #define DW_MMC_CARD_NEED_INIT 1 |
| int id; |
| int last_detect_state; |
| }; |
| |
| #if defined(CONFIG_DEBUG_FS) |
| static int dw_mci_req_show(struct seq_file *s, void *v) |
| { |
| struct dw_mci_slot *slot = s->private; |
| struct mmc_request *mrq; |
| struct mmc_command *cmd; |
| struct mmc_command *stop; |
| struct mmc_data *data; |
| |
| /* Make sure we get a consistent snapshot */ |
| spin_lock_bh(&slot->host->lock); |
| mrq = slot->mrq; |
| |
| if (mrq) { |
| cmd = mrq->cmd; |
| data = mrq->data; |
| stop = mrq->stop; |
| |
| if (cmd) |
| seq_printf(s, |
| "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n", |
| cmd->opcode, cmd->arg, cmd->flags, |
| cmd->resp[0], cmd->resp[1], cmd->resp[2], |
| cmd->resp[2], cmd->error); |
| if (data) |
| seq_printf(s, "DATA %u / %u * %u flg %x err %d\n", |
| data->bytes_xfered, data->blocks, |
| data->blksz, data->flags, data->error); |
| if (stop) |
| seq_printf(s, |
| "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n", |
| stop->opcode, stop->arg, stop->flags, |
| stop->resp[0], stop->resp[1], stop->resp[2], |
| stop->resp[2], stop->error); |
| } |
| |
| spin_unlock_bh(&slot->host->lock); |
| |
| return 0; |
| } |
| |
| static int dw_mci_req_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, dw_mci_req_show, inode->i_private); |
| } |
| |
| static const struct file_operations dw_mci_req_fops = { |
| .owner = THIS_MODULE, |
| .open = dw_mci_req_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static int dw_mci_regs_show(struct seq_file *s, void *v) |
| { |
| seq_printf(s, "STATUS:\t0x%08x\n", SDMMC_STATUS); |
| seq_printf(s, "RINTSTS:\t0x%08x\n", SDMMC_RINTSTS); |
| seq_printf(s, "CMD:\t0x%08x\n", SDMMC_CMD); |
| seq_printf(s, "CTRL:\t0x%08x\n", SDMMC_CTRL); |
| seq_printf(s, "INTMASK:\t0x%08x\n", SDMMC_INTMASK); |
| seq_printf(s, "CLKENA:\t0x%08x\n", SDMMC_CLKENA); |
| |
| return 0; |
| } |
| |
| static int dw_mci_regs_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, dw_mci_regs_show, inode->i_private); |
| } |
| |
| static const struct file_operations dw_mci_regs_fops = { |
| .owner = THIS_MODULE, |
| .open = dw_mci_regs_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static void dw_mci_init_debugfs(struct dw_mci_slot *slot) |
| { |
| struct mmc_host *mmc = slot->mmc; |
| struct dw_mci *host = slot->host; |
| struct dentry *root; |
| struct dentry *node; |
| |
| root = mmc->debugfs_root; |
| if (!root) |
| return; |
| |
| node = debugfs_create_file("regs", S_IRUSR, root, host, |
| &dw_mci_regs_fops); |
| if (!node) |
| goto err; |
| |
| node = debugfs_create_file("req", S_IRUSR, root, slot, |
| &dw_mci_req_fops); |
| if (!node) |
| goto err; |
| |
| node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state); |
| if (!node) |
| goto err; |
| |
| node = debugfs_create_x32("pending_events", S_IRUSR, root, |
| (u32 *)&host->pending_events); |
| if (!node) |
| goto err; |
| |
| node = debugfs_create_x32("completed_events", S_IRUSR, root, |
| (u32 *)&host->completed_events); |
| if (!node) |
| goto err; |
| |
| return; |
| |
| err: |
| dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); |
| } |
| #endif /* defined(CONFIG_DEBUG_FS) */ |
| |
| static void dw_mci_set_timeout(struct dw_mci *host) |
| { |
| /* timeout (maximum) */ |
| mci_writel(host, TMOUT, 0xffffffff); |
| } |
| |
| static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd) |
| { |
| struct mmc_data *data; |
| u32 cmdr; |
| cmd->error = -EINPROGRESS; |
| |
| cmdr = cmd->opcode; |
| |
| if (cmdr == MMC_STOP_TRANSMISSION) |
| cmdr |= SDMMC_CMD_STOP; |
| else |
| cmdr |= SDMMC_CMD_PRV_DAT_WAIT; |
| |
| if (cmd->flags & MMC_RSP_PRESENT) { |
| /* We expect a response, so set this bit */ |
| cmdr |= SDMMC_CMD_RESP_EXP; |
| if (cmd->flags & MMC_RSP_136) |
| cmdr |= SDMMC_CMD_RESP_LONG; |
| } |
| |
| if (cmd->flags & MMC_RSP_CRC) |
| cmdr |= SDMMC_CMD_RESP_CRC; |
| |
| data = cmd->data; |
| if (data) { |
| cmdr |= SDMMC_CMD_DAT_EXP; |
| if (data->flags & MMC_DATA_STREAM) |
| cmdr |= SDMMC_CMD_STRM_MODE; |
| if (data->flags & MMC_DATA_WRITE) |
| cmdr |= SDMMC_CMD_DAT_WR; |
| } |
| |
| return cmdr; |
| } |
| |
| static void dw_mci_start_command(struct dw_mci *host, |
| struct mmc_command *cmd, u32 cmd_flags) |
| { |
| host->cmd = cmd; |
| dev_vdbg(&host->dev, |
| "start command: ARGR=0x%08x CMDR=0x%08x\n", |
| cmd->arg, cmd_flags); |
| |
| mci_writel(host, CMDARG, cmd->arg); |
| wmb(); |
| |
| mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START); |
| } |
| |
| static void send_stop_cmd(struct dw_mci *host, struct mmc_data *data) |
| { |
| dw_mci_start_command(host, data->stop, host->stop_cmdr); |
| } |
| |
| /* DMA interface functions */ |
| static void dw_mci_stop_dma(struct dw_mci *host) |
| { |
| if (host->using_dma) { |
| host->dma_ops->stop(host); |
| host->dma_ops->cleanup(host); |
| } else { |
| /* Data transfer was stopped by the interrupt handler */ |
| set_bit(EVENT_XFER_COMPLETE, &host->pending_events); |
| } |
| } |
| |
| static int dw_mci_get_dma_dir(struct mmc_data *data) |
| { |
| if (data->flags & MMC_DATA_WRITE) |
| return DMA_TO_DEVICE; |
| else |
| return DMA_FROM_DEVICE; |
| } |
| |
| #ifdef CONFIG_MMC_DW_IDMAC |
| static void dw_mci_dma_cleanup(struct dw_mci *host) |
| { |
| struct mmc_data *data = host->data; |
| |
| if (data) |
| if (!data->host_cookie) |
| dma_unmap_sg(&host->dev, |
| data->sg, |
| data->sg_len, |
| dw_mci_get_dma_dir(data)); |
| } |
| |
| static void dw_mci_idmac_stop_dma(struct dw_mci *host) |
| { |
| u32 temp; |
| |
| /* Disable and reset the IDMAC interface */ |
| temp = mci_readl(host, CTRL); |
| temp &= ~SDMMC_CTRL_USE_IDMAC; |
| temp |= SDMMC_CTRL_DMA_RESET; |
| mci_writel(host, CTRL, temp); |
| |
| /* Stop the IDMAC running */ |
| temp = mci_readl(host, BMOD); |
| temp &= ~(SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB); |
| mci_writel(host, BMOD, temp); |
| } |
| |
| static void dw_mci_idmac_complete_dma(struct dw_mci *host) |
| { |
| struct mmc_data *data = host->data; |
| |
| dev_vdbg(&host->dev, "DMA complete\n"); |
| |
| host->dma_ops->cleanup(host); |
| |
| /* |
| * If the card was removed, data will be NULL. No point in trying to |
| * send the stop command or waiting for NBUSY in this case. |
| */ |
| if (data) { |
| set_bit(EVENT_XFER_COMPLETE, &host->pending_events); |
| tasklet_schedule(&host->tasklet); |
| } |
| } |
| |
| static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data, |
| unsigned int sg_len) |
| { |
| int i; |
| struct idmac_desc *desc = host->sg_cpu; |
| |
| for (i = 0; i < sg_len; i++, desc++) { |
| unsigned int length = sg_dma_len(&data->sg[i]); |
| u32 mem_addr = sg_dma_address(&data->sg[i]); |
| |
| /* Set the OWN bit and disable interrupts for this descriptor */ |
| desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC | IDMAC_DES0_CH; |
| |
| /* Buffer length */ |
| IDMAC_SET_BUFFER1_SIZE(desc, length); |
| |
| /* Physical address to DMA to/from */ |
| desc->des2 = mem_addr; |
| } |
| |
| /* Set first descriptor */ |
| desc = host->sg_cpu; |
| desc->des0 |= IDMAC_DES0_FD; |
| |
| /* Set last descriptor */ |
| desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc); |
| desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC); |
| desc->des0 |= IDMAC_DES0_LD; |
| |
| wmb(); |
| } |
| |
| static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len) |
| { |
| u32 temp; |
| |
| dw_mci_translate_sglist(host, host->data, sg_len); |
| |
| /* Select IDMAC interface */ |
| temp = mci_readl(host, CTRL); |
| temp |= SDMMC_CTRL_USE_IDMAC; |
| mci_writel(host, CTRL, temp); |
| |
| wmb(); |
| |
| /* Enable the IDMAC */ |
| temp = mci_readl(host, BMOD); |
| temp |= SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB; |
| mci_writel(host, BMOD, temp); |
| |
| /* Start it running */ |
| mci_writel(host, PLDMND, 1); |
| } |
| |
| static int dw_mci_idmac_init(struct dw_mci *host) |
| { |
| struct idmac_desc *p; |
| int i, dma_support; |
| |
| /* Number of descriptors in the ring buffer */ |
| host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc); |
| |
| /* Check if Hardware Configuration Register has support for DMA */ |
| dma_support = (mci_readl(host, HCON) >> 16) & 0x3; |
| |
| if (!dma_support || dma_support > 2) { |
| dev_err(&host->dev, |
| "Host Controller does not support IDMA Tx.\n"); |
| host->dma_ops = NULL; |
| return -ENODEV; |
| } |
| |
| dev_info(&host->dev, "Using internal DMA controller.\n"); |
| |
| /* Forward link the descriptor list */ |
| for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++) |
| p->des3 = host->sg_dma + (sizeof(struct idmac_desc) * (i + 1)); |
| |
| /* Set the last descriptor as the end-of-ring descriptor */ |
| p->des3 = host->sg_dma; |
| p->des0 = IDMAC_DES0_ER; |
| |
| mci_writel(host, BMOD, SDMMC_IDMAC_SWRESET); |
| |
| /* Mask out interrupts - get Tx & Rx complete only */ |
| mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI | |
| SDMMC_IDMAC_INT_TI); |
| |
| /* Set the descriptor base address */ |
| mci_writel(host, DBADDR, host->sg_dma); |
| return 0; |
| } |
| |
| static struct dw_mci_dma_ops dw_mci_idmac_ops = { |
| .init = dw_mci_idmac_init, |
| .start = dw_mci_idmac_start_dma, |
| .stop = dw_mci_idmac_stop_dma, |
| .complete = dw_mci_idmac_complete_dma, |
| .cleanup = dw_mci_dma_cleanup, |
| }; |
| #endif /* CONFIG_MMC_DW_IDMAC */ |
| |
| static int dw_mci_pre_dma_transfer(struct dw_mci *host, |
| struct mmc_data *data, |
| bool next) |
| { |
| struct scatterlist *sg; |
| unsigned int i, sg_len; |
| |
| if (!next && data->host_cookie) |
| return data->host_cookie; |
| |
| /* |
| * We don't do DMA on "complex" transfers, i.e. with |
| * non-word-aligned buffers or lengths. Also, we don't bother |
| * with all the DMA setup overhead for short transfers. |
| */ |
| if (data->blocks * data->blksz < DW_MCI_DMA_THRESHOLD) |
| return -EINVAL; |
| |
| if (data->blksz & 3) |
| return -EINVAL; |
| |
| for_each_sg(data->sg, sg, data->sg_len, i) { |
| if (sg->offset & 3 || sg->length & 3) |
| return -EINVAL; |
| } |
| |
| sg_len = dma_map_sg(&host->dev, |
| data->sg, |
| data->sg_len, |
| dw_mci_get_dma_dir(data)); |
| if (sg_len == 0) |
| return -EINVAL; |
| |
| if (next) |
| data->host_cookie = sg_len; |
| |
| return sg_len; |
| } |
| |
| static void dw_mci_pre_req(struct mmc_host *mmc, |
| struct mmc_request *mrq, |
| bool is_first_req) |
| { |
| struct dw_mci_slot *slot = mmc_priv(mmc); |
| struct mmc_data *data = mrq->data; |
| |
| if (!slot->host->use_dma || !data) |
| return; |
| |
| if (data->host_cookie) { |
| data->host_cookie = 0; |
| return; |
| } |
| |
| if (dw_mci_pre_dma_transfer(slot->host, mrq->data, 1) < 0) |
| data->host_cookie = 0; |
| } |
| |
| static void dw_mci_post_req(struct mmc_host *mmc, |
| struct mmc_request *mrq, |
| int err) |
| { |
| struct dw_mci_slot *slot = mmc_priv(mmc); |
| struct mmc_data *data = mrq->data; |
| |
| if (!slot->host->use_dma || !data) |
| return; |
| |
| if (data->host_cookie) |
| dma_unmap_sg(&slot->host->dev, |
| data->sg, |
| data->sg_len, |
| dw_mci_get_dma_dir(data)); |
| data->host_cookie = 0; |
| } |
| |
| static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data) |
| { |
| int sg_len; |
| u32 temp; |
| |
| host->using_dma = 0; |
| |
| /* If we don't have a channel, we can't do DMA */ |
| if (!host->use_dma) |
| return -ENODEV; |
| |
| sg_len = dw_mci_pre_dma_transfer(host, data, 0); |
| if (sg_len < 0) { |
| host->dma_ops->stop(host); |
| return sg_len; |
| } |
| |
| host->using_dma = 1; |
| |
| dev_vdbg(&host->dev, |
| "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n", |
| (unsigned long)host->sg_cpu, (unsigned long)host->sg_dma, |
| sg_len); |
| |
| /* Enable the DMA interface */ |
| temp = mci_readl(host, CTRL); |
| temp |= SDMMC_CTRL_DMA_ENABLE; |
| mci_writel(host, CTRL, temp); |
| |
| /* Disable RX/TX IRQs, let DMA handle it */ |
| temp = mci_readl(host, INTMASK); |
| temp &= ~(SDMMC_INT_RXDR | SDMMC_INT_TXDR); |
| mci_writel(host, INTMASK, temp); |
| |
| host->dma_ops->start(host, sg_len); |
| |
| return 0; |
| } |
| |
| static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data) |
| { |
| u32 temp; |
| |
| data->error = -EINPROGRESS; |
| |
| WARN_ON(host->data); |
| host->sg = NULL; |
| host->data = data; |
| |
| if (data->flags & MMC_DATA_READ) |
| host->dir_status = DW_MCI_RECV_STATUS; |
| else |
| host->dir_status = DW_MCI_SEND_STATUS; |
| |
| if (dw_mci_submit_data_dma(host, data)) { |
| int flags = SG_MITER_ATOMIC; |
| if (host->data->flags & MMC_DATA_READ) |
| flags |= SG_MITER_TO_SG; |
| else |
| flags |= SG_MITER_FROM_SG; |
| |
| sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); |
| host->sg = data->sg; |
| host->part_buf_start = 0; |
| host->part_buf_count = 0; |
| |
| mci_writel(host, RINTSTS, SDMMC_INT_TXDR | SDMMC_INT_RXDR); |
| temp = mci_readl(host, INTMASK); |
| temp |= SDMMC_INT_TXDR | SDMMC_INT_RXDR; |
| mci_writel(host, INTMASK, temp); |
| |
| temp = mci_readl(host, CTRL); |
| temp &= ~SDMMC_CTRL_DMA_ENABLE; |
| mci_writel(host, CTRL, temp); |
| } |
| } |
| |
| static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg) |
| { |
| struct dw_mci *host = slot->host; |
| unsigned long timeout = jiffies + msecs_to_jiffies(500); |
| unsigned int cmd_status = 0; |
| |
| mci_writel(host, CMDARG, arg); |
| wmb(); |
| mci_writel(host, CMD, SDMMC_CMD_START | cmd); |
| |
| while (time_before(jiffies, timeout)) { |
| cmd_status = mci_readl(host, CMD); |
| if (!(cmd_status & SDMMC_CMD_START)) |
| return; |
| } |
| dev_err(&slot->mmc->class_dev, |
| "Timeout sending command (cmd %#x arg %#x status %#x)\n", |
| cmd, arg, cmd_status); |
| } |
| |
| static void dw_mci_setup_bus(struct dw_mci_slot *slot) |
| { |
| struct dw_mci *host = slot->host; |
| u32 div; |
| u32 clk_en_a; |
| |
| if (slot->clock != host->current_speed) { |
| div = host->bus_hz / slot->clock; |
| if (host->bus_hz % slot->clock && host->bus_hz > slot->clock) |
| /* |
| * move the + 1 after the divide to prevent |
| * over-clocking the card. |
| */ |
| div += 1; |
| |
| div = (host->bus_hz != slot->clock) ? DIV_ROUND_UP(div, 2) : 0; |
| |
| dev_info(&slot->mmc->class_dev, |
| "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ" |
| " div = %d)\n", slot->id, host->bus_hz, slot->clock, |
| div ? ((host->bus_hz / div) >> 1) : host->bus_hz, div); |
| |
| /* disable clock */ |
| mci_writel(host, CLKENA, 0); |
| mci_writel(host, CLKSRC, 0); |
| |
| /* inform CIU */ |
| mci_send_cmd(slot, |
| SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0); |
| |
| /* set clock to desired speed */ |
| mci_writel(host, CLKDIV, div); |
| |
| /* inform CIU */ |
| mci_send_cmd(slot, |
| SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0); |
| |
| /* enable clock; only low power if no SDIO */ |
| clk_en_a = SDMMC_CLKEN_ENABLE << slot->id; |
| if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id))) |
| clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id; |
| mci_writel(host, CLKENA, clk_en_a); |
| |
| /* inform CIU */ |
| mci_send_cmd(slot, |
| SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0); |
| |
| host->current_speed = slot->clock; |
| } |
| |
| /* Set the current slot bus width */ |
| mci_writel(host, CTYPE, (slot->ctype << slot->id)); |
| } |
| |
| static void __dw_mci_start_request(struct dw_mci *host, |
| struct dw_mci_slot *slot, |
| struct mmc_command *cmd) |
| { |
| struct mmc_request *mrq; |
| struct mmc_data *data; |
| u32 cmdflags; |
| |
| mrq = slot->mrq; |
| if (host->pdata->select_slot) |
| host->pdata->select_slot(slot->id); |
| |
| /* Slot specific timing and width adjustment */ |
| dw_mci_setup_bus(slot); |
| |
| host->cur_slot = slot; |
| host->mrq = mrq; |
| |
| host->pending_events = 0; |
| host->completed_events = 0; |
| host->data_status = 0; |
| |
| data = cmd->data; |
| if (data) { |
| dw_mci_set_timeout(host); |
| mci_writel(host, BYTCNT, data->blksz*data->blocks); |
| mci_writel(host, BLKSIZ, data->blksz); |
| } |
| |
| cmdflags = dw_mci_prepare_command(slot->mmc, cmd); |
| |
| /* this is the first command, send the initialization clock */ |
| if (test_and_clear_bit(DW_MMC_CARD_NEED_INIT, &slot->flags)) |
| cmdflags |= SDMMC_CMD_INIT; |
| |
| if (data) { |
| dw_mci_submit_data(host, data); |
| wmb(); |
| } |
| |
| dw_mci_start_command(host, cmd, cmdflags); |
| |
| if (mrq->stop) |
| host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop); |
| } |
| |
| static void dw_mci_start_request(struct dw_mci *host, |
| struct dw_mci_slot *slot) |
| { |
| struct mmc_request *mrq = slot->mrq; |
| struct mmc_command *cmd; |
| |
| cmd = mrq->sbc ? mrq->sbc : mrq->cmd; |
| __dw_mci_start_request(host, slot, cmd); |
| } |
| |
| /* must be called with host->lock held */ |
| static void dw_mci_queue_request(struct dw_mci *host, struct dw_mci_slot *slot, |
| struct mmc_request *mrq) |
| { |
| dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n", |
| host->state); |
| |
| slot->mrq = mrq; |
| |
| if (host->state == STATE_IDLE) { |
| host->state = STATE_SENDING_CMD; |
| dw_mci_start_request(host, slot); |
| } else { |
| list_add_tail(&slot->queue_node, &host->queue); |
| } |
| } |
| |
| static void dw_mci_request(struct mmc_host *mmc, struct mmc_request *mrq) |
| { |
| struct dw_mci_slot *slot = mmc_priv(mmc); |
| struct dw_mci *host = slot->host; |
| |
| WARN_ON(slot->mrq); |
| |
| /* |
| * The check for card presence and queueing of the request must be |
| * atomic, otherwise the card could be removed in between and the |
| * request wouldn't fail until another card was inserted. |
| */ |
| spin_lock_bh(&host->lock); |
| |
| if (!test_bit(DW_MMC_CARD_PRESENT, &slot->flags)) { |
| spin_unlock_bh(&host->lock); |
| mrq->cmd->error = -ENOMEDIUM; |
| mmc_request_done(mmc, mrq); |
| return; |
| } |
| |
| dw_mci_queue_request(host, slot, mrq); |
| |
| spin_unlock_bh(&host->lock); |
| } |
| |
| static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| struct dw_mci_slot *slot = mmc_priv(mmc); |
| u32 regs; |
| |
| /* set default 1 bit mode */ |
| slot->ctype = SDMMC_CTYPE_1BIT; |
| |
| switch (ios->bus_width) { |
| case MMC_BUS_WIDTH_1: |
| slot->ctype = SDMMC_CTYPE_1BIT; |
| break; |
| case MMC_BUS_WIDTH_4: |
| slot->ctype = SDMMC_CTYPE_4BIT; |
| break; |
| case MMC_BUS_WIDTH_8: |
| slot->ctype = SDMMC_CTYPE_8BIT; |
| break; |
| } |
| |
| regs = mci_readl(slot->host, UHS_REG); |
| |
| /* DDR mode set */ |
| if (ios->timing == MMC_TIMING_UHS_DDR50) |
| regs |= (0x1 << slot->id) << 16; |
| else |
| regs &= ~(0x1 << slot->id) << 16; |
| |
| mci_writel(slot->host, UHS_REG, regs); |
| |
| if (ios->clock) { |
| /* |
| * Use mirror of ios->clock to prevent race with mmc |
| * core ios update when finding the minimum. |
| */ |
| slot->clock = ios->clock; |
| } |
| |
| switch (ios->power_mode) { |
| case MMC_POWER_UP: |
| set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static int dw_mci_get_ro(struct mmc_host *mmc) |
| { |
| int read_only; |
| struct dw_mci_slot *slot = mmc_priv(mmc); |
| struct dw_mci_board *brd = slot->host->pdata; |
| |
| /* Use platform get_ro function, else try on board write protect */ |
| if (brd->get_ro) |
| read_only = brd->get_ro(slot->id); |
| else |
| read_only = |
| mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0; |
| |
| dev_dbg(&mmc->class_dev, "card is %s\n", |
| read_only ? "read-only" : "read-write"); |
| |
| return read_only; |
| } |
| |
| static int dw_mci_get_cd(struct mmc_host *mmc) |
| { |
| int present; |
| struct dw_mci_slot *slot = mmc_priv(mmc); |
| struct dw_mci_board *brd = slot->host->pdata; |
| |
| /* Use platform get_cd function, else try onboard card detect */ |
| if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION) |
| present = 1; |
| else if (brd->get_cd) |
| present = !brd->get_cd(slot->id); |
| else |
| present = (mci_readl(slot->host, CDETECT) & (1 << slot->id)) |
| == 0 ? 1 : 0; |
| |
| if (present) |
| dev_dbg(&mmc->class_dev, "card is present\n"); |
| else |
| dev_dbg(&mmc->class_dev, "card is not present\n"); |
| |
| return present; |
| } |
| |
| /* |
| * Disable lower power mode. |
| * |
| * Low power mode will stop the card clock when idle. According to the |
| * description of the CLKENA register we should disable low power mode |
| * for SDIO cards if we need SDIO interrupts to work. |
| * |
| * This function is fast if low power mode is already disabled. |
| */ |
| static void dw_mci_disable_low_power(struct dw_mci_slot *slot) |
| { |
| struct dw_mci *host = slot->host; |
| u32 clk_en_a; |
| const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id; |
| |
| clk_en_a = mci_readl(host, CLKENA); |
| |
| if (clk_en_a & clken_low_pwr) { |
| mci_writel(host, CLKENA, clk_en_a & ~clken_low_pwr); |
| mci_send_cmd(slot, SDMMC_CMD_UPD_CLK | |
| SDMMC_CMD_PRV_DAT_WAIT, 0); |
| } |
| } |
| |
| static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb) |
| { |
| struct dw_mci_slot *slot = mmc_priv(mmc); |
| struct dw_mci *host = slot->host; |
| u32 int_mask; |
| |
| /* Enable/disable Slot Specific SDIO interrupt */ |
| int_mask = mci_readl(host, INTMASK); |
| if (enb) { |
| /* |
| * Turn off low power mode if it was enabled. This is a bit of |
| * a heavy operation and we disable / enable IRQs a lot, so |
| * we'll leave low power mode disabled and it will get |
| * re-enabled again in dw_mci_setup_bus(). |
| */ |
| dw_mci_disable_low_power(slot); |
| |
| mci_writel(host, INTMASK, |
| (int_mask | SDMMC_INT_SDIO(slot->id))); |
| } else { |
| mci_writel(host, INTMASK, |
| (int_mask & ~SDMMC_INT_SDIO(slot->id))); |
| } |
| } |
| |
| static const struct mmc_host_ops dw_mci_ops = { |
| .request = dw_mci_request, |
| .pre_req = dw_mci_pre_req, |
| .post_req = dw_mci_post_req, |
| .set_ios = dw_mci_set_ios, |
| .get_ro = dw_mci_get_ro, |
| .get_cd = dw_mci_get_cd, |
| .enable_sdio_irq = dw_mci_enable_sdio_irq, |
| }; |
| |
| static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq) |
| __releases(&host->lock) |
| __acquires(&host->lock) |
| { |
| struct dw_mci_slot *slot; |
| struct mmc_host *prev_mmc = host->cur_slot->mmc; |
| |
| WARN_ON(host->cmd || host->data); |
| |
| host->cur_slot->mrq = NULL; |
| host->mrq = NULL; |
| if (!list_empty(&host->queue)) { |
| slot = list_entry(host->queue.next, |
| struct dw_mci_slot, queue_node); |
| list_del(&slot->queue_node); |
| dev_vdbg(&host->dev, "list not empty: %s is next\n", |
| mmc_hostname(slot->mmc)); |
| host->state = STATE_SENDING_CMD; |
| dw_mci_start_request(host, slot); |
| } else { |
| dev_vdbg(&host->dev, "list empty\n"); |
| host->state = STATE_IDLE; |
| } |
| |
| spin_unlock(&host->lock); |
| mmc_request_done(prev_mmc, mrq); |
| spin_lock(&host->lock); |
| } |
| |
| static void dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd) |
| { |
| u32 status = host->cmd_status; |
| |
| host->cmd_status = 0; |
| |
| /* Read the response from the card (up to 16 bytes) */ |
| if (cmd->flags & MMC_RSP_PRESENT) { |
| if (cmd->flags & MMC_RSP_136) { |
| cmd->resp[3] = mci_readl(host, RESP0); |
| cmd->resp[2] = mci_readl(host, RESP1); |
| cmd->resp[1] = mci_readl(host, RESP2); |
| cmd->resp[0] = mci_readl(host, RESP3); |
| } else { |
| cmd->resp[0] = mci_readl(host, RESP0); |
| cmd->resp[1] = 0; |
| cmd->resp[2] = 0; |
| cmd->resp[3] = 0; |
| } |
| } |
| |
| if (status & SDMMC_INT_RTO) |
| cmd->error = -ETIMEDOUT; |
| else if ((cmd->flags & MMC_RSP_CRC) && (status & SDMMC_INT_RCRC)) |
| cmd->error = -EILSEQ; |
| else if (status & SDMMC_INT_RESP_ERR) |
| cmd->error = -EIO; |
| else |
| cmd->error = 0; |
| |
| if (cmd->error) { |
| /* newer ip versions need a delay between retries */ |
| if (host->quirks & DW_MCI_QUIRK_RETRY_DELAY) |
| mdelay(20); |
| |
| if (cmd->data) { |
| dw_mci_stop_dma(host); |
| host->data = NULL; |
| } |
| } |
| } |
| |
| static void dw_mci_tasklet_func(unsigned long priv) |
| { |
| struct dw_mci *host = (struct dw_mci *)priv; |
| struct mmc_data *data; |
| struct mmc_command *cmd; |
| enum dw_mci_state state; |
| enum dw_mci_state prev_state; |
| u32 status, ctrl; |
| |
| spin_lock(&host->lock); |
| |
| state = host->state; |
| data = host->data; |
| |
| do { |
| prev_state = state; |
| |
| switch (state) { |
| case STATE_IDLE: |
| break; |
| |
| case STATE_SENDING_CMD: |
| if (!test_and_clear_bit(EVENT_CMD_COMPLETE, |
| &host->pending_events)) |
| break; |
| |
| cmd = host->cmd; |
| host->cmd = NULL; |
| set_bit(EVENT_CMD_COMPLETE, &host->completed_events); |
| dw_mci_command_complete(host, cmd); |
| if (cmd == host->mrq->sbc && !cmd->error) { |
| prev_state = state = STATE_SENDING_CMD; |
| __dw_mci_start_request(host, host->cur_slot, |
| host->mrq->cmd); |
| goto unlock; |
| } |
| |
| if (!host->mrq->data || cmd->error) { |
| dw_mci_request_end(host, host->mrq); |
| goto unlock; |
| } |
| |
| prev_state = state = STATE_SENDING_DATA; |
| /* fall through */ |
| |
| case STATE_SENDING_DATA: |
| if (test_and_clear_bit(EVENT_DATA_ERROR, |
| &host->pending_events)) { |
| dw_mci_stop_dma(host); |
| if (data->stop) |
| send_stop_cmd(host, data); |
| state = STATE_DATA_ERROR; |
| break; |
| } |
| |
| if (!test_and_clear_bit(EVENT_XFER_COMPLETE, |
| &host->pending_events)) |
| break; |
| |
| set_bit(EVENT_XFER_COMPLETE, &host->completed_events); |
| prev_state = state = STATE_DATA_BUSY; |
| /* fall through */ |
| |
| case STATE_DATA_BUSY: |
| if (!test_and_clear_bit(EVENT_DATA_COMPLETE, |
| &host->pending_events)) |
| break; |
| |
| host->data = NULL; |
| set_bit(EVENT_DATA_COMPLETE, &host->completed_events); |
| status = host->data_status; |
| |
| if (status & DW_MCI_DATA_ERROR_FLAGS) { |
| if (status & SDMMC_INT_DTO) { |
| data->error = -ETIMEDOUT; |
| } else if (status & SDMMC_INT_DCRC) { |
| data->error = -EILSEQ; |
| } else if (status & SDMMC_INT_EBE && |
| host->dir_status == |
| DW_MCI_SEND_STATUS) { |
| /* |
| * No data CRC status was returned. |
| * The number of bytes transferred will |
| * be exaggerated in PIO mode. |
| */ |
| data->bytes_xfered = 0; |
| data->error = -ETIMEDOUT; |
| } else { |
| dev_err(&host->dev, |
| "data FIFO error " |
| "(status=%08x)\n", |
| status); |
| data->error = -EIO; |
| } |
| /* |
| * After an error, there may be data lingering |
| * in the FIFO, so reset it - doing so |
| * generates a block interrupt, hence setting |
| * the scatter-gather pointer to NULL. |
| */ |
| sg_miter_stop(&host->sg_miter); |
| host->sg = NULL; |
| ctrl = mci_readl(host, CTRL); |
| ctrl |= SDMMC_CTRL_FIFO_RESET; |
| mci_writel(host, CTRL, ctrl); |
| } else { |
| data->bytes_xfered = data->blocks * data->blksz; |
| data->error = 0; |
| } |
| |
| if (!data->stop) { |
| dw_mci_request_end(host, host->mrq); |
| goto unlock; |
| } |
| |
| if (host->mrq->sbc && !data->error) { |
| data->stop->error = 0; |
| dw_mci_request_end(host, host->mrq); |
| goto unlock; |
| } |
| |
| prev_state = state = STATE_SENDING_STOP; |
| if (!data->error) |
| send_stop_cmd(host, data); |
| /* fall through */ |
| |
| case STATE_SENDING_STOP: |
| if (!test_and_clear_bit(EVENT_CMD_COMPLETE, |
| &host->pending_events)) |
| break; |
| |
| host->cmd = NULL; |
| dw_mci_command_complete(host, host->mrq->stop); |
| dw_mci_request_end(host, host->mrq); |
| goto unlock; |
| |
| case STATE_DATA_ERROR: |
| if (!test_and_clear_bit(EVENT_XFER_COMPLETE, |
| &host->pending_events)) |
| break; |
| |
| state = STATE_DATA_BUSY; |
| break; |
| } |
| } while (state != prev_state); |
| |
| host->state = state; |
| unlock: |
| spin_unlock(&host->lock); |
| |
| } |
| |
| /* push final bytes to part_buf, only use during push */ |
| static void dw_mci_set_part_bytes(struct dw_mci *host, void *buf, int cnt) |
| { |
| memcpy((void *)&host->part_buf, buf, cnt); |
| host->part_buf_count = cnt; |
| } |
| |
| /* append bytes to part_buf, only use during push */ |
| static int dw_mci_push_part_bytes(struct dw_mci *host, void *buf, int cnt) |
| { |
| cnt = min(cnt, (1 << host->data_shift) - host->part_buf_count); |
| memcpy((void *)&host->part_buf + host->part_buf_count, buf, cnt); |
| host->part_buf_count += cnt; |
| return cnt; |
| } |
| |
| /* pull first bytes from part_buf, only use during pull */ |
| static int dw_mci_pull_part_bytes(struct dw_mci *host, void *buf, int cnt) |
| { |
| cnt = min(cnt, (int)host->part_buf_count); |
| if (cnt) { |
| memcpy(buf, (void *)&host->part_buf + host->part_buf_start, |
| cnt); |
| host->part_buf_count -= cnt; |
| host->part_buf_start += cnt; |
| } |
| return cnt; |
| } |
| |
| /* pull final bytes from the part_buf, assuming it's just been filled */ |
| static void dw_mci_pull_final_bytes(struct dw_mci *host, void *buf, int cnt) |
| { |
| memcpy(buf, &host->part_buf, cnt); |
| host->part_buf_start = cnt; |
| host->part_buf_count = (1 << host->data_shift) - cnt; |
| } |
| |
| static void dw_mci_push_data16(struct dw_mci *host, void *buf, int cnt) |
| { |
| /* try and push anything in the part_buf */ |
| if (unlikely(host->part_buf_count)) { |
| int len = dw_mci_push_part_bytes(host, buf, cnt); |
| buf += len; |
| cnt -= len; |
| if (!sg_next(host->sg) || host->part_buf_count == 2) { |
| mci_writew(host, DATA(host->data_offset), |
| host->part_buf16); |
| host->part_buf_count = 0; |
| } |
| } |
| #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS |
| if (unlikely((unsigned long)buf & 0x1)) { |
| while (cnt >= 2) { |
| u16 aligned_buf[64]; |
| int len = min(cnt & -2, (int)sizeof(aligned_buf)); |
| int items = len >> 1; |
| int i; |
| /* memcpy from input buffer into aligned buffer */ |
| memcpy(aligned_buf, buf, len); |
| buf += len; |
| cnt -= len; |
| /* push data from aligned buffer into fifo */ |
| for (i = 0; i < items; ++i) |
| mci_writew(host, DATA(host->data_offset), |
| aligned_buf[i]); |
| } |
| } else |
| #endif |
| { |
| u16 *pdata = buf; |
| for (; cnt >= 2; cnt -= 2) |
| mci_writew(host, DATA(host->data_offset), *pdata++); |
| buf = pdata; |
| } |
| /* put anything remaining in the part_buf */ |
| if (cnt) { |
| dw_mci_set_part_bytes(host, buf, cnt); |
| if (!sg_next(host->sg)) |
| mci_writew(host, DATA(host->data_offset), |
| host->part_buf16); |
| } |
| } |
| |
| static void dw_mci_pull_data16(struct dw_mci *host, void *buf, int cnt) |
| { |
| #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS |
| if (unlikely((unsigned long)buf & 0x1)) { |
| while (cnt >= 2) { |
| /* pull data from fifo into aligned buffer */ |
| u16 aligned_buf[64]; |
| int len = min(cnt & -2, (int)sizeof(aligned_buf)); |
| int items = len >> 1; |
| int i; |
| for (i = 0; i < items; ++i) |
| aligned_buf[i] = mci_readw(host, |
| DATA(host->data_offset)); |
| /* memcpy from aligned buffer into output buffer */ |
| memcpy(buf, aligned_buf, len); |
| buf += len; |
| cnt -= len; |
| } |
| } else |
| #endif |
| { |
| u16 *pdata = buf; |
| for (; cnt >= 2; cnt -= 2) |
| *pdata++ = mci_readw(host, DATA(host->data_offset)); |
| buf = pdata; |
| } |
| if (cnt) { |
| host->part_buf16 = mci_readw(host, DATA(host->data_offset)); |
| dw_mci_pull_final_bytes(host, buf, cnt); |
| } |
| } |
| |
| static void dw_mci_push_data32(struct dw_mci *host, void *buf, int cnt) |
| { |
| /* try and push anything in the part_buf */ |
| if (unlikely(host->part_buf_count)) { |
| int len = dw_mci_push_part_bytes(host, buf, cnt); |
| buf += len; |
| cnt -= len; |
| if (!sg_next(host->sg) || host->part_buf_count == 4) { |
| mci_writel(host, DATA(host->data_offset), |
| host->part_buf32); |
| host->part_buf_count = 0; |
| } |
| } |
| #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS |
| if (unlikely((unsigned long)buf & 0x3)) { |
| while (cnt >= 4) { |
| u32 aligned_buf[32]; |
| int len = min(cnt & -4, (int)sizeof(aligned_buf)); |
| int items = len >> 2; |
| int i; |
| /* memcpy from input buffer into aligned buffer */ |
| memcpy(aligned_buf, buf, len); |
| buf += len; |
| cnt -= len; |
| /* push data from aligned buffer into fifo */ |
| for (i = 0; i < items; ++i) |
| mci_writel(host, DATA(host->data_offset), |
| aligned_buf[i]); |
| } |
| } else |
| #endif |
| { |
| u32 *pdata = buf; |
| for (; cnt >= 4; cnt -= 4) |
| mci_writel(host, DATA(host->data_offset), *pdata++); |
| buf = pdata; |
| } |
| /* put anything remaining in the part_buf */ |
| if (cnt) { |
| dw_mci_set_part_bytes(host, buf, cnt); |
| if (!sg_next(host->sg)) |
| mci_writel(host, DATA(host->data_offset), |
| host->part_buf32); |
| } |
| } |
| |
| static void dw_mci_pull_data32(struct dw_mci *host, void *buf, int cnt) |
| { |
| #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS |
| if (unlikely((unsigned long)buf & 0x3)) { |
| while (cnt >= 4) { |
| /* pull data from fifo into aligned buffer */ |
| u32 aligned_buf[32]; |
| int len = min(cnt & -4, (int)sizeof(aligned_buf)); |
| int items = len >> 2; |
| int i; |
| for (i = 0; i < items; ++i) |
| aligned_buf[i] = mci_readl(host, |
| DATA(host->data_offset)); |
| /* memcpy from aligned buffer into output buffer */ |
| memcpy(buf, aligned_buf, len); |
| buf += len; |
| cnt -= len; |
| } |
| } else |
| #endif |
| { |
| u32 *pdata = buf; |
| for (; cnt >= 4; cnt -= 4) |
| *pdata++ = mci_readl(host, DATA(host->data_offset)); |
| buf = pdata; |
| } |
| if (cnt) { |
| host->part_buf32 = mci_readl(host, DATA(host->data_offset)); |
| dw_mci_pull_final_bytes(host, buf, cnt); |
| } |
| } |
| |
| static void dw_mci_push_data64(struct dw_mci *host, void *buf, int cnt) |
| { |
| /* try and push anything in the part_buf */ |
| if (unlikely(host->part_buf_count)) { |
| int len = dw_mci_push_part_bytes(host, buf, cnt); |
| buf += len; |
| cnt -= len; |
| if (!sg_next(host->sg) || host->part_buf_count == 8) { |
| mci_writew(host, DATA(host->data_offset), |
| host->part_buf); |
| host->part_buf_count = 0; |
| } |
| } |
| #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS |
| if (unlikely((unsigned long)buf & 0x7)) { |
| while (cnt >= 8) { |
| u64 aligned_buf[16]; |
| int len = min(cnt & -8, (int)sizeof(aligned_buf)); |
| int items = len >> 3; |
| int i; |
| /* memcpy from input buffer into aligned buffer */ |
| memcpy(aligned_buf, buf, len); |
| buf += len; |
| cnt -= len; |
| /* push data from aligned buffer into fifo */ |
| for (i = 0; i < items; ++i) |
| mci_writeq(host, DATA(host->data_offset), |
| aligned_buf[i]); |
| } |
| } else |
| #endif |
| { |
| u64 *pdata = buf; |
| for (; cnt >= 8; cnt -= 8) |
| mci_writeq(host, DATA(host->data_offset), *pdata++); |
| buf = pdata; |
| } |
| /* put anything remaining in the part_buf */ |
| if (cnt) { |
| dw_mci_set_part_bytes(host, buf, cnt); |
| if (!sg_next(host->sg)) |
| mci_writeq(host, DATA(host->data_offset), |
| host->part_buf); |
| } |
| } |
| |
| static void dw_mci_pull_data64(struct dw_mci *host, void *buf, int cnt) |
| { |
| #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS |
| if (unlikely((unsigned long)buf & 0x7)) { |
| while (cnt >= 8) { |
| /* pull data from fifo into aligned buffer */ |
| u64 aligned_buf[16]; |
| int len = min(cnt & -8, (int)sizeof(aligned_buf)); |
| int items = len >> 3; |
| int i; |
| for (i = 0; i < items; ++i) |
| aligned_buf[i] = mci_readq(host, |
| DATA(host->data_offset)); |
| /* memcpy from aligned buffer into output buffer */ |
| memcpy(buf, aligned_buf, len); |
| buf += len; |
| cnt -= len; |
| } |
| } else |
| #endif |
| { |
| u64 *pdata = buf; |
| for (; cnt >= 8; cnt -= 8) |
| *pdata++ = mci_readq(host, DATA(host->data_offset)); |
| buf = pdata; |
| } |
| if (cnt) { |
| host->part_buf = mci_readq(host, DATA(host->data_offset)); |
| dw_mci_pull_final_bytes(host, buf, cnt); |
| } |
| } |
| |
| static void dw_mci_pull_data(struct dw_mci *host, void *buf, int cnt) |
| { |
| int len; |
| |
| /* get remaining partial bytes */ |
| len = dw_mci_pull_part_bytes(host, buf, cnt); |
| if (unlikely(len == cnt)) |
| return; |
| buf += len; |
| cnt -= len; |
| |
| /* get the rest of the data */ |
| host->pull_data(host, buf, cnt); |
| } |
| |
| static void dw_mci_read_data_pio(struct dw_mci *host) |
| { |
| struct sg_mapping_iter *sg_miter = &host->sg_miter; |
| void *buf; |
| unsigned int offset; |
| struct mmc_data *data = host->data; |
| int shift = host->data_shift; |
| u32 status; |
| unsigned int nbytes = 0, len; |
| unsigned int remain, fcnt; |
| |
| do { |
| if (!sg_miter_next(sg_miter)) |
| goto done; |
| |
| host->sg = sg_miter->__sg; |
| buf = sg_miter->addr; |
| remain = sg_miter->length; |
| offset = 0; |
| |
| do { |
| fcnt = (SDMMC_GET_FCNT(mci_readl(host, STATUS)) |
| << shift) + host->part_buf_count; |
| len = min(remain, fcnt); |
| if (!len) |
| break; |
| dw_mci_pull_data(host, (void *)(buf + offset), len); |
| offset += len; |
| nbytes += len; |
| remain -= len; |
| } while (remain); |
| |
| sg_miter->consumed = offset; |
| status = mci_readl(host, MINTSTS); |
| mci_writel(host, RINTSTS, SDMMC_INT_RXDR); |
| } while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/ |
| data->bytes_xfered += nbytes; |
| |
| if (!remain) { |
| if (!sg_miter_next(sg_miter)) |
| goto done; |
| sg_miter->consumed = 0; |
| } |
| sg_miter_stop(sg_miter); |
| return; |
| |
| done: |
| data->bytes_xfered += nbytes; |
| sg_miter_stop(sg_miter); |
| host->sg = NULL; |
| smp_wmb(); |
| set_bit(EVENT_XFER_COMPLETE, &host->pending_events); |
| } |
| |
| static void dw_mci_write_data_pio(struct dw_mci *host) |
| { |
| struct sg_mapping_iter *sg_miter = &host->sg_miter; |
| void *buf; |
| unsigned int offset; |
| struct mmc_data *data = host->data; |
| int shift = host->data_shift; |
| u32 status; |
| unsigned int nbytes = 0, len; |
| unsigned int fifo_depth = host->fifo_depth; |
| unsigned int remain, fcnt; |
| |
| do { |
| if (!sg_miter_next(sg_miter)) |
| goto done; |
| |
| host->sg = sg_miter->__sg; |
| buf = sg_miter->addr; |
| remain = sg_miter->length; |
| offset = 0; |
| |
| do { |
| fcnt = ((fifo_depth - |
| SDMMC_GET_FCNT(mci_readl(host, STATUS))) |
| << shift) - host->part_buf_count; |
| len = min(remain, fcnt); |
| if (!len) |
| break; |
| host->push_data(host, (void *)(buf + offset), len); |
| offset += len; |
| nbytes += len; |
| remain -= len; |
| } while (remain); |
| |
| sg_miter->consumed = offset; |
| status = mci_readl(host, MINTSTS); |
| mci_writel(host, RINTSTS, SDMMC_INT_TXDR); |
| } while (status & SDMMC_INT_TXDR); /* if TXDR write again */ |
| data->bytes_xfered += nbytes; |
| |
| if (!remain) { |
| if (!sg_miter_next(sg_miter)) |
| goto done; |
| sg_miter->consumed = 0; |
| } |
| sg_miter_stop(sg_miter); |
| return; |
| |
| done: |
| data->bytes_xfered += nbytes; |
| sg_miter_stop(sg_miter); |
| host->sg = NULL; |
| smp_wmb(); |
| set_bit(EVENT_XFER_COMPLETE, &host->pending_events); |
| } |
| |
| static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status) |
| { |
| if (!host->cmd_status) |
| host->cmd_status = status; |
| |
| smp_wmb(); |
| |
| set_bit(EVENT_CMD_COMPLETE, &host->pending_events); |
| tasklet_schedule(&host->tasklet); |
| } |
| |
| static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) |
| { |
| struct dw_mci *host = dev_id; |
| u32 pending; |
| unsigned int pass_count = 0; |
| int i; |
| |
| do { |
| pending = mci_readl(host, MINTSTS); /* read-only mask reg */ |
| |
| /* |
| * DTO fix - version 2.10a and below, and only if internal DMA |
| * is configured. |
| */ |
| if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) { |
| if (!pending && |
| ((mci_readl(host, STATUS) >> 17) & 0x1fff)) |
| pending |= SDMMC_INT_DATA_OVER; |
| } |
| |
| if (!pending) |
| break; |
| |
| if (pending & DW_MCI_CMD_ERROR_FLAGS) { |
| mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS); |
| host->cmd_status = pending; |
| smp_wmb(); |
| set_bit(EVENT_CMD_COMPLETE, &host->pending_events); |
| } |
| |
| if (pending & DW_MCI_DATA_ERROR_FLAGS) { |
| /* if there is an error report DATA_ERROR */ |
| mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS); |
| host->data_status = pending; |
| smp_wmb(); |
| set_bit(EVENT_DATA_ERROR, &host->pending_events); |
| tasklet_schedule(&host->tasklet); |
| } |
| |
| if (pending & SDMMC_INT_DATA_OVER) { |
| mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER); |
| if (!host->data_status) |
| host->data_status = pending; |
| smp_wmb(); |
| if (host->dir_status == DW_MCI_RECV_STATUS) { |
| if (host->sg != NULL) |
| dw_mci_read_data_pio(host); |
| } |
| set_bit(EVENT_DATA_COMPLETE, &host->pending_events); |
| tasklet_schedule(&host->tasklet); |
| } |
| |
| if (pending & SDMMC_INT_RXDR) { |
| mci_writel(host, RINTSTS, SDMMC_INT_RXDR); |
| if (host->dir_status == DW_MCI_RECV_STATUS && host->sg) |
| dw_mci_read_data_pio(host); |
| } |
| |
| if (pending & SDMMC_INT_TXDR) { |
| mci_writel(host, RINTSTS, SDMMC_INT_TXDR); |
| if (host->dir_status == DW_MCI_SEND_STATUS && host->sg) |
| dw_mci_write_data_pio(host); |
| } |
| |
| if (pending & SDMMC_INT_CMD_DONE) { |
| mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE); |
| dw_mci_cmd_interrupt(host, pending); |
| } |
| |
| if (pending & SDMMC_INT_CD) { |
| mci_writel(host, RINTSTS, SDMMC_INT_CD); |
| queue_work(host->card_workqueue, &host->card_work); |
| } |
| |
| /* Handle SDIO Interrupts */ |
| for (i = 0; i < host->num_slots; i++) { |
| struct dw_mci_slot *slot = host->slot[i]; |
| if (pending & SDMMC_INT_SDIO(i)) { |
| mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i)); |
| mmc_signal_sdio_irq(slot->mmc); |
| } |
| } |
| |
| } while (pass_count++ < 5); |
| |
| #ifdef CONFIG_MMC_DW_IDMAC |
| /* Handle DMA interrupts */ |
| pending = mci_readl(host, IDSTS); |
| if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) { |
| mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI); |
| mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI); |
| host->dma_ops->complete(host); |
| } |
| #endif |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void dw_mci_work_routine_card(struct work_struct *work) |
| { |
| struct dw_mci *host = container_of(work, struct dw_mci, card_work); |
| int i; |
| |
| for (i = 0; i < host->num_slots; i++) { |
| struct dw_mci_slot *slot = host->slot[i]; |
| struct mmc_host *mmc = slot->mmc; |
| struct mmc_request *mrq; |
| int present; |
| u32 ctrl; |
| |
| present = dw_mci_get_cd(mmc); |
| while (present != slot->last_detect_state) { |
| dev_dbg(&slot->mmc->class_dev, "card %s\n", |
| present ? "inserted" : "removed"); |
| |
| /* Power up slot (before spin_lock, may sleep) */ |
| if (present != 0 && host->pdata->setpower) |
| host->pdata->setpower(slot->id, mmc->ocr_avail); |
| |
| spin_lock_bh(&host->lock); |
| |
| /* Card change detected */ |
| slot->last_detect_state = present; |
| |
| /* Mark card as present if applicable */ |
| if (present != 0) |
| set_bit(DW_MMC_CARD_PRESENT, &slot->flags); |
| |
| /* Clean up queue if present */ |
| mrq = slot->mrq; |
| if (mrq) { |
| if (mrq == host->mrq) { |
| host->data = NULL; |
| host->cmd = NULL; |
| |
| switch (host->state) { |
| case STATE_IDLE: |
| break; |
| case STATE_SENDING_CMD: |
| mrq->cmd->error = -ENOMEDIUM; |
| if (!mrq->data) |
| break; |
| /* fall through */ |
| case STATE_SENDING_DATA: |
| mrq->data->error = -ENOMEDIUM; |
| dw_mci_stop_dma(host); |
| break; |
| case STATE_DATA_BUSY: |
| case STATE_DATA_ERROR: |
| if (mrq->data->error == -EINPROGRESS) |
| mrq->data->error = -ENOMEDIUM; |
| if (!mrq->stop) |
| break; |
| /* fall through */ |
| case STATE_SENDING_STOP: |
| mrq->stop->error = -ENOMEDIUM; |
| break; |
| } |
| |
| dw_mci_request_end(host, mrq); |
| } else { |
| list_del(&slot->queue_node); |
| mrq->cmd->error = -ENOMEDIUM; |
| if (mrq->data) |
| mrq->data->error = -ENOMEDIUM; |
| if (mrq->stop) |
| mrq->stop->error = -ENOMEDIUM; |
| |
| spin_unlock(&host->lock); |
| mmc_request_done(slot->mmc, mrq); |
| spin_lock(&host->lock); |
| } |
| } |
| |
| /* Power down slot */ |
| if (present == 0) { |
| clear_bit(DW_MMC_CARD_PRESENT, &slot->flags); |
| |
| /* |
| * Clear down the FIFO - doing so generates a |
| * block interrupt, hence setting the |
| * scatter-gather pointer to NULL. |
| */ |
| sg_miter_stop(&host->sg_miter); |
| host->sg = NULL; |
| |
| ctrl = mci_readl(host, CTRL); |
| ctrl |= SDMMC_CTRL_FIFO_RESET; |
| mci_writel(host, CTRL, ctrl); |
| |
| #ifdef CONFIG_MMC_DW_IDMAC |
| ctrl = mci_readl(host, BMOD); |
| /* Software reset of DMA */ |
| ctrl |= SDMMC_IDMAC_SWRESET; |
| mci_writel(host, BMOD, ctrl); |
| #endif |
| |
| } |
| |
| spin_unlock_bh(&host->lock); |
| |
| /* Power down slot (after spin_unlock, may sleep) */ |
| if (present == 0 && host->pdata->setpower) |
| host->pdata->setpower(slot->id, 0); |
| |
| present = dw_mci_get_cd(mmc); |
| } |
| |
| mmc_detect_change(slot->mmc, |
| msecs_to_jiffies(host->pdata->detect_delay_ms)); |
| } |
| } |
| |
| static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) |
| { |
| struct mmc_host *mmc; |
| struct dw_mci_slot *slot; |
| |
| mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), &host->dev); |
| if (!mmc) |
| return -ENOMEM; |
| |
| slot = mmc_priv(mmc); |
| slot->id = id; |
| slot->mmc = mmc; |
| slot->host = host; |
| |
| mmc->ops = &dw_mci_ops; |
| mmc->f_min = DIV_ROUND_UP(host->bus_hz, 510); |
| mmc->f_max = host->bus_hz; |
| |
| if (host->pdata->get_ocr) |
| mmc->ocr_avail = host->pdata->get_ocr(id); |
| else |
| mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; |
| |
| /* |
| * Start with slot power disabled, it will be enabled when a card |
| * is detected. |
| */ |
| if (host->pdata->setpower) |
| host->pdata->setpower(id, 0); |
| |
| if (host->pdata->caps) |
| mmc->caps = host->pdata->caps; |
| |
| if (host->pdata->caps2) |
| mmc->caps2 = host->pdata->caps2; |
| |
| if (host->pdata->get_bus_wd) |
| if (host->pdata->get_bus_wd(slot->id) >= 4) |
| mmc->caps |= MMC_CAP_4_BIT_DATA; |
| |
| if (host->pdata->quirks & DW_MCI_QUIRK_HIGHSPEED) |
| mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; |
| |
| if (mmc->caps2 & MMC_CAP2_POWEROFF_NOTIFY) |
| mmc->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT; |
| else |
| mmc->power_notify_type = MMC_HOST_PW_NOTIFY_NONE; |
| |
| if (host->pdata->blk_settings) { |
| mmc->max_segs = host->pdata->blk_settings->max_segs; |
| mmc->max_blk_size = host->pdata->blk_settings->max_blk_size; |
| mmc->max_blk_count = host->pdata->blk_settings->max_blk_count; |
| mmc->max_req_size = host->pdata->blk_settings->max_req_size; |
| mmc->max_seg_size = host->pdata->blk_settings->max_seg_size; |
| } else { |
| /* Useful defaults if platform data is unset. */ |
| #ifdef CONFIG_MMC_DW_IDMAC |
| mmc->max_segs = host->ring_size; |
| mmc->max_blk_size = 65536; |
| mmc->max_blk_count = host->ring_size; |
| mmc->max_seg_size = 0x1000; |
| mmc->max_req_size = mmc->max_seg_size * mmc->max_blk_count; |
| #else |
| mmc->max_segs = 64; |
| mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */ |
| mmc->max_blk_count = 512; |
| mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; |
| mmc->max_seg_size = mmc->max_req_size; |
| #endif /* CONFIG_MMC_DW_IDMAC */ |
| } |
| |
| host->vmmc = regulator_get(mmc_dev(mmc), "vmmc"); |
| if (IS_ERR(host->vmmc)) { |
| pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc)); |
| host->vmmc = NULL; |
| } else |
| regulator_enable(host->vmmc); |
| |
| if (dw_mci_get_cd(mmc)) |
| set_bit(DW_MMC_CARD_PRESENT, &slot->flags); |
| else |
| clear_bit(DW_MMC_CARD_PRESENT, &slot->flags); |
| |
| host->slot[id] = slot; |
| mmc_add_host(mmc); |
| |
| #if defined(CONFIG_DEBUG_FS) |
| dw_mci_init_debugfs(slot); |
| #endif |
| |
| /* Card initially undetected */ |
| slot->last_detect_state = 0; |
| |
| /* |
| * Card may have been plugged in prior to boot so we |
| * need to run the detect tasklet |
| */ |
| queue_work(host->card_workqueue, &host->card_work); |
| |
| return 0; |
| } |
| |
| static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id) |
| { |
| /* Shutdown detect IRQ */ |
| if (slot->host->pdata->exit) |
| slot->host->pdata->exit(id); |
| |
| /* Debugfs stuff is cleaned up by mmc core */ |
| mmc_remove_host(slot->mmc); |
| slot->host->slot[id] = NULL; |
| mmc_free_host(slot->mmc); |
| } |
| |
| static void dw_mci_init_dma(struct dw_mci *host) |
| { |
| /* Alloc memory for sg translation */ |
| host->sg_cpu = dma_alloc_coherent(&host->dev, PAGE_SIZE, |
| &host->sg_dma, GFP_KERNEL); |
| if (!host->sg_cpu) { |
| dev_err(&host->dev, "%s: could not alloc DMA memory\n", |
| __func__); |
| goto no_dma; |
| } |
| |
| /* Determine which DMA interface to use */ |
| #ifdef CONFIG_MMC_DW_IDMAC |
| host->dma_ops = &dw_mci_idmac_ops; |
| #endif |
| |
| if (!host->dma_ops) |
| goto no_dma; |
| |
| if (host->dma_ops->init && host->dma_ops->start && |
| host->dma_ops->stop && host->dma_ops->cleanup) { |
| if (host->dma_ops->init(host)) { |
| dev_err(&host->dev, "%s: Unable to initialize " |
| "DMA Controller.\n", __func__); |
| goto no_dma; |
| } |
| } else { |
| dev_err(&host->dev, "DMA initialization not found.\n"); |
| goto no_dma; |
| } |
| |
| host->use_dma = 1; |
| return; |
| |
| no_dma: |
| dev_info(&host->dev, "Using PIO mode.\n"); |
| host->use_dma = 0; |
| return; |
| } |
| |
| static bool mci_wait_reset(struct device *dev, struct dw_mci *host) |
| { |
| unsigned long timeout = jiffies + msecs_to_jiffies(500); |
| unsigned int ctrl; |
| |
| mci_writel(host, CTRL, (SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET | |
| SDMMC_CTRL_DMA_RESET)); |
| |
| /* wait till resets clear */ |
| do { |
| ctrl = mci_readl(host, CTRL); |
| if (!(ctrl & (SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET | |
| SDMMC_CTRL_DMA_RESET))) |
| return true; |
| } while (time_before(jiffies, timeout)); |
| |
| dev_err(dev, "Timeout resetting block (ctrl %#x)\n", ctrl); |
| |
| return false; |
| } |
| |
| int dw_mci_probe(struct dw_mci *host) |
| { |
| int width, i, ret = 0; |
| u32 fifo_size; |
| |
| if (!host->pdata || !host->pdata->init) { |
| dev_err(&host->dev, |
| "Platform data must supply init function\n"); |
| return -ENODEV; |
| } |
| |
| if (!host->pdata->select_slot && host->pdata->num_slots > 1) { |
| dev_err(&host->dev, |
| "Platform data must supply select_slot function\n"); |
| return -ENODEV; |
| } |
| |
| if (!host->pdata->bus_hz) { |
| dev_err(&host->dev, |
| "Platform data must supply bus speed\n"); |
| return -ENODEV; |
| } |
| |
| host->bus_hz = host->pdata->bus_hz; |
| host->quirks = host->pdata->quirks; |
| |
| spin_lock_init(&host->lock); |
| INIT_LIST_HEAD(&host->queue); |
| |
| /* |
| * Get the host data width - this assumes that HCON has been set with |
| * the correct values. |
| */ |
| i = (mci_readl(host, HCON) >> 7) & 0x7; |
| if (!i) { |
| host->push_data = dw_mci_push_data16; |
| host->pull_data = dw_mci_pull_data16; |
| width = 16; |
| host->data_shift = 1; |
| } else if (i == 2) { |
| host->push_data = dw_mci_push_data64; |
| host->pull_data = dw_mci_pull_data64; |
| width = 64; |
| host->data_shift = 3; |
| } else { |
| /* Check for a reserved value, and warn if it is */ |
| WARN((i != 1), |
| "HCON reports a reserved host data width!\n" |
| "Defaulting to 32-bit access.\n"); |
| host->push_data = dw_mci_push_data32; |
| host->pull_data = dw_mci_pull_data32; |
| width = 32; |
| host->data_shift = 2; |
| } |
| |
| /* Reset all blocks */ |
| if (!mci_wait_reset(&host->dev, host)) |
| return -ENODEV; |
| |
| host->dma_ops = host->pdata->dma_ops; |
| dw_mci_init_dma(host); |
| |
| /* Clear the interrupts for the host controller */ |
| mci_writel(host, RINTSTS, 0xFFFFFFFF); |
| mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */ |
| |
| /* Put in max timeout */ |
| mci_writel(host, TMOUT, 0xFFFFFFFF); |
| |
| /* |
| * FIFO threshold settings RxMark = fifo_size / 2 - 1, |
| * Tx Mark = fifo_size / 2 DMA Size = 8 |
| */ |
| if (!host->pdata->fifo_depth) { |
| /* |
| * Power-on value of RX_WMark is FIFO_DEPTH-1, but this may |
| * have been overwritten by the bootloader, just like we're |
| * about to do, so if you know the value for your hardware, you |
| * should put it in the platform data. |
| */ |
| fifo_size = mci_readl(host, FIFOTH); |
| fifo_size = 1 + ((fifo_size >> 16) & 0xfff); |
| } else { |
| fifo_size = host->pdata->fifo_depth; |
| } |
| host->fifo_depth = fifo_size; |
| host->fifoth_val = ((0x2 << 28) | ((fifo_size/2 - 1) << 16) | |
| ((fifo_size/2) << 0)); |
| mci_writel(host, FIFOTH, host->fifoth_val); |
| |
| /* disable clock to CIU */ |
| mci_writel(host, CLKENA, 0); |
| mci_writel(host, CLKSRC, 0); |
| |
| tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host); |
| host->card_workqueue = alloc_workqueue("dw-mci-card", |
| WQ_MEM_RECLAIM | WQ_NON_REENTRANT, 1); |
| if (!host->card_workqueue) |
| goto err_dmaunmap; |
| INIT_WORK(&host->card_work, dw_mci_work_routine_card); |
| ret = request_irq(host->irq, dw_mci_interrupt, host->irq_flags, "dw-mci", host); |
| if (ret) |
| goto err_workqueue; |
| |
| if (host->pdata->num_slots) |
| host->num_slots = host->pdata->num_slots; |
| else |
| host->num_slots = ((mci_readl(host, HCON) >> 1) & 0x1F) + 1; |
| |
| /* We need at least one slot to succeed */ |
| for (i = 0; i < host->num_slots; i++) { |
| ret = dw_mci_init_slot(host, i); |
| if (ret) { |
| ret = -ENODEV; |
| goto err_init_slot; |
| } |
| } |
| |
| /* |
| * In 2.40a spec, Data offset is changed. |
| * Need to check the version-id and set data-offset for DATA register. |
| */ |
| host->verid = SDMMC_GET_VERID(mci_readl(host, VERID)); |
| dev_info(&host->dev, "Version ID is %04x\n", host->verid); |
| |
| if (host->verid < DW_MMC_240A) |
| host->data_offset = DATA_OFFSET; |
| else |
| host->data_offset = DATA_240A_OFFSET; |
| |
| /* |
| * Enable interrupts for command done, data over, data empty, card det, |
| * receive ready and error such as transmit, receive timeout, crc error |
| */ |
| mci_writel(host, RINTSTS, 0xFFFFFFFF); |
| mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER | |
| SDMMC_INT_TXDR | SDMMC_INT_RXDR | |
| DW_MCI_ERROR_FLAGS | SDMMC_INT_CD); |
| mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */ |
| |
| dev_info(&host->dev, "DW MMC controller at irq %d, " |
| "%d bit host data width, " |
| "%u deep fifo\n", |
| host->irq, width, fifo_size); |
| if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) |
| dev_info(&host->dev, "Internal DMAC interrupt fix enabled.\n"); |
| |
| return 0; |
| |
| err_init_slot: |
| /* De-init any initialized slots */ |
| while (i > 0) { |
| if (host->slot[i]) |
| dw_mci_cleanup_slot(host->slot[i], i); |
| i--; |
| } |
| free_irq(host->irq, host); |
| |
| err_workqueue: |
| destroy_workqueue(host->card_workqueue); |
| |
| err_dmaunmap: |
| if (host->use_dma && host->dma_ops->exit) |
| host->dma_ops->exit(host); |
| dma_free_coherent(&host->dev, PAGE_SIZE, |
| host->sg_cpu, host->sg_dma); |
| |
| if (host->vmmc) { |
| regulator_disable(host->vmmc); |
| regulator_put(host->vmmc); |
| } |
| return ret; |
| } |
| EXPORT_SYMBOL(dw_mci_probe); |
| |
| void dw_mci_remove(struct dw_mci *host) |
| { |
| int i; |
| |
| mci_writel(host, RINTSTS, 0xFFFFFFFF); |
| mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */ |
| |
| for (i = 0; i < host->num_slots; i++) { |
| dev_dbg(&host->dev, "remove slot %d\n", i); |
| if (host->slot[i]) |
| dw_mci_cleanup_slot(host->slot[i], i); |
| } |
| |
| /* disable clock to CIU */ |
| mci_writel(host, CLKENA, 0); |
| mci_writel(host, CLKSRC, 0); |
| |
| free_irq(host->irq, host); |
| destroy_workqueue(host->card_workqueue); |
| dma_free_coherent(&host->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); |
| |
| if (host->use_dma && host->dma_ops->exit) |
| host->dma_ops->exit(host); |
| |
| if (host->vmmc) { |
| regulator_disable(host->vmmc); |
| regulator_put(host->vmmc); |
| } |
| |
| } |
| EXPORT_SYMBOL(dw_mci_remove); |
| |
| |
| |
| #ifdef CONFIG_PM_SLEEP |
| /* |
| * TODO: we should probably disable the clock to the card in the suspend path. |
| */ |
| int dw_mci_suspend(struct dw_mci *host) |
| { |
| int i, ret = 0; |
| |
| for (i = 0; i < host->num_slots; i++) { |
| struct dw_mci_slot *slot = host->slot[i]; |
| if (!slot) |
| continue; |
| ret = mmc_suspend_host(slot->mmc); |
| if (ret < 0) { |
| while (--i >= 0) { |
| slot = host->slot[i]; |
| if (slot) |
| mmc_resume_host(host->slot[i]->mmc); |
| } |
| return ret; |
| } |
| } |
| |
| if (host->vmmc) |
| regulator_disable(host->vmmc); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(dw_mci_suspend); |
| |
| int dw_mci_resume(struct dw_mci *host) |
| { |
| int i, ret; |
| |
| if (host->vmmc) |
| regulator_enable(host->vmmc); |
| |
| if (!mci_wait_reset(&host->dev, host)) { |
| ret = -ENODEV; |
| return ret; |
| } |
| |
| if (host->use_dma && host->dma_ops->init) |
| host->dma_ops->init(host); |
| |
| /* Restore the old value at FIFOTH register */ |
| mci_writel(host, FIFOTH, host->fifoth_val); |
| |
| mci_writel(host, RINTSTS, 0xFFFFFFFF); |
| mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER | |
| SDMMC_INT_TXDR | SDMMC_INT_RXDR | |
| DW_MCI_ERROR_FLAGS | SDMMC_INT_CD); |
| mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); |
| |
| for (i = 0; i < host->num_slots; i++) { |
| struct dw_mci_slot *slot = host->slot[i]; |
| if (!slot) |
| continue; |
| ret = mmc_resume_host(host->slot[i]->mmc); |
| if (ret < 0) |
| return ret; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(dw_mci_resume); |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static int __init dw_mci_init(void) |
| { |
| printk(KERN_INFO "Synopsys Designware Multimedia Card Interface Driver"); |
| return 0; |
| } |
| |
| static void __exit dw_mci_exit(void) |
| { |
| } |
| |
| module_init(dw_mci_init); |
| module_exit(dw_mci_exit); |
| |
| MODULE_DESCRIPTION("DW Multimedia Card Interface driver"); |
| MODULE_AUTHOR("NXP Semiconductor VietNam"); |
| MODULE_AUTHOR("Imagination Technologies Ltd"); |
| MODULE_LICENSE("GPL v2"); |