| /* |
| * arch/arm/mach-sa1100/include/mach/irqs.h |
| * |
| * Copyright (C) 1996 Russell King |
| * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus). |
| * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation) |
| * |
| * 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs. |
| */ |
| |
| #define IRQ_GPIO0 0 |
| #define IRQ_GPIO1 1 |
| #define IRQ_GPIO2 2 |
| #define IRQ_GPIO3 3 |
| #define IRQ_GPIO4 4 |
| #define IRQ_GPIO5 5 |
| #define IRQ_GPIO6 6 |
| #define IRQ_GPIO7 7 |
| #define IRQ_GPIO8 8 |
| #define IRQ_GPIO9 9 |
| #define IRQ_GPIO10 10 |
| #define IRQ_GPIO11_27 11 |
| #define IRQ_LCD 12 /* LCD controller */ |
| #define IRQ_Ser0UDC 13 /* Ser. port 0 UDC */ |
| #define IRQ_Ser1SDLC 14 /* Ser. port 1 SDLC */ |
| #define IRQ_Ser1UART 15 /* Ser. port 1 UART */ |
| #define IRQ_Ser2ICP 16 /* Ser. port 2 ICP */ |
| #define IRQ_Ser3UART 17 /* Ser. port 3 UART */ |
| #define IRQ_Ser4MCP 18 /* Ser. port 4 MCP */ |
| #define IRQ_Ser4SSP 19 /* Ser. port 4 SSP */ |
| #define IRQ_DMA0 20 /* DMA controller channel 0 */ |
| #define IRQ_DMA1 21 /* DMA controller channel 1 */ |
| #define IRQ_DMA2 22 /* DMA controller channel 2 */ |
| #define IRQ_DMA3 23 /* DMA controller channel 3 */ |
| #define IRQ_DMA4 24 /* DMA controller channel 4 */ |
| #define IRQ_DMA5 25 /* DMA controller channel 5 */ |
| #define IRQ_OST0 26 /* OS Timer match 0 */ |
| #define IRQ_OST1 27 /* OS Timer match 1 */ |
| #define IRQ_OST2 28 /* OS Timer match 2 */ |
| #define IRQ_OST3 29 /* OS Timer match 3 */ |
| #define IRQ_RTC1Hz 30 /* RTC 1 Hz clock */ |
| #define IRQ_RTCAlrm 31 /* RTC Alarm */ |
| |
| #define IRQ_GPIO11 32 |
| #define IRQ_GPIO12 33 |
| #define IRQ_GPIO13 34 |
| #define IRQ_GPIO14 35 |
| #define IRQ_GPIO15 36 |
| #define IRQ_GPIO16 37 |
| #define IRQ_GPIO17 38 |
| #define IRQ_GPIO18 39 |
| #define IRQ_GPIO19 40 |
| #define IRQ_GPIO20 41 |
| #define IRQ_GPIO21 42 |
| #define IRQ_GPIO22 43 |
| #define IRQ_GPIO23 44 |
| #define IRQ_GPIO24 45 |
| #define IRQ_GPIO25 46 |
| #define IRQ_GPIO26 47 |
| #define IRQ_GPIO27 48 |
| |
| /* |
| * The next 16 interrupts are for board specific purposes. Since |
| * the kernel can only run on one machine at a time, we can re-use |
| * these. If you need more, increase IRQ_BOARD_END, but keep it |
| * within sensible limits. IRQs 49 to 64 are available. |
| */ |
| #define IRQ_BOARD_START 49 |
| #define IRQ_BOARD_END 65 |
| |
| #define IRQ_SA1111_START (IRQ_BOARD_END) |
| #define IRQ_GPAIN0 (IRQ_BOARD_END + 0) |
| #define IRQ_GPAIN1 (IRQ_BOARD_END + 1) |
| #define IRQ_GPAIN2 (IRQ_BOARD_END + 2) |
| #define IRQ_GPAIN3 (IRQ_BOARD_END + 3) |
| #define IRQ_GPBIN0 (IRQ_BOARD_END + 4) |
| #define IRQ_GPBIN1 (IRQ_BOARD_END + 5) |
| #define IRQ_GPBIN2 (IRQ_BOARD_END + 6) |
| #define IRQ_GPBIN3 (IRQ_BOARD_END + 7) |
| #define IRQ_GPBIN4 (IRQ_BOARD_END + 8) |
| #define IRQ_GPBIN5 (IRQ_BOARD_END + 9) |
| #define IRQ_GPCIN0 (IRQ_BOARD_END + 10) |
| #define IRQ_GPCIN1 (IRQ_BOARD_END + 11) |
| #define IRQ_GPCIN2 (IRQ_BOARD_END + 12) |
| #define IRQ_GPCIN3 (IRQ_BOARD_END + 13) |
| #define IRQ_GPCIN4 (IRQ_BOARD_END + 14) |
| #define IRQ_GPCIN5 (IRQ_BOARD_END + 15) |
| #define IRQ_GPCIN6 (IRQ_BOARD_END + 16) |
| #define IRQ_GPCIN7 (IRQ_BOARD_END + 17) |
| #define IRQ_MSTXINT (IRQ_BOARD_END + 18) |
| #define IRQ_MSRXINT (IRQ_BOARD_END + 19) |
| #define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20) |
| #define IRQ_TPTXINT (IRQ_BOARD_END + 21) |
| #define IRQ_TPRXINT (IRQ_BOARD_END + 22) |
| #define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23) |
| #define SSPXMTINT (IRQ_BOARD_END + 24) |
| #define SSPRCVINT (IRQ_BOARD_END + 25) |
| #define SSPROR (IRQ_BOARD_END + 26) |
| #define AUDXMTDMADONEA (IRQ_BOARD_END + 32) |
| #define AUDRCVDMADONEA (IRQ_BOARD_END + 33) |
| #define AUDXMTDMADONEB (IRQ_BOARD_END + 34) |
| #define AUDRCVDMADONEB (IRQ_BOARD_END + 35) |
| #define AUDTFSR (IRQ_BOARD_END + 36) |
| #define AUDRFSR (IRQ_BOARD_END + 37) |
| #define AUDTUR (IRQ_BOARD_END + 38) |
| #define AUDROR (IRQ_BOARD_END + 39) |
| #define AUDDTS (IRQ_BOARD_END + 40) |
| #define AUDRDD (IRQ_BOARD_END + 41) |
| #define AUDSTO (IRQ_BOARD_END + 42) |
| #define IRQ_USBPWR (IRQ_BOARD_END + 43) |
| #define IRQ_HCIM (IRQ_BOARD_END + 44) |
| #define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45) |
| #define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46) |
| #define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47) |
| #define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48) |
| #define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49) |
| #define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50) |
| #define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51) |
| #define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52) |
| #define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53) |
| #define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54) |
| |
| /* |
| * Figure out the MAX IRQ number. |
| * |
| * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1. |
| * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1 |
| * Otherwise, we have the standard IRQs only. |
| */ |
| #ifdef CONFIG_SA1111 |
| #define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1) |
| #elif defined(CONFIG_SHARP_LOCOMO) |
| #define NR_IRQS (IRQ_LOCOMO_SPI + 1) |
| #else |
| #define NR_IRQS (IRQ_BOARD_START) |
| #endif |
| |
| /* |
| * Board specific IRQs. Define them here. |
| * Do not surround them with ifdefs. |
| */ |
| #define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0) |
| #define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1) |
| #define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2) |
| |
| /* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */ |
| #define IRQ_LOCOMO_KEY (IRQ_BOARD_START + 0) |
| #define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) |
| #define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) |
| #define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) |
| |