clocksource: m86k: Convert to clocksource_register_hz/khz
This converts the m86k clocksources to use clocksource_register_hz/khz
CC: Geert Uytterhoeven <geert@linux-m68k.org>
CC: Greg Ungerer <gerg@uclinux.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
diff --git a/arch/m68k/platform/68328/timers.c b/arch/m68k/platform/68328/timers.c
index 309f7259..f267886 100644
--- a/arch/m68k/platform/68328/timers.c
+++ b/arch/m68k/platform/68328/timers.c
@@ -93,7 +93,6 @@
.name = "timer",
.rating = 250,
.read = m68328_read_clk,
- .shift = 20,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -115,8 +114,7 @@
/* Enable timer 1 */
TCTL |= TCTL_TEN;
- m68328_clk.mult = clocksource_hz2mult(TICKS_PER_JIFFY*HZ, m68328_clk.shift);
- clocksource_register(&m68328_clk);
+ clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
}
/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/dma_timer.c b/arch/m68k/platform/coldfire/dma_timer.c
index a5f5628..235ad57 100644
--- a/arch/m68k/platform/coldfire/dma_timer.c
+++ b/arch/m68k/platform/coldfire/dma_timer.c
@@ -44,7 +44,6 @@
.rating = 200,
.read = cf_dt_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -60,9 +59,7 @@
__raw_writeb(0x00, DTER0);
__raw_writel(0x00000000, DTRR0);
__raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0);
- clocksource_cf_dt.mult = clocksource_hz2mult(DMA_FREQ,
- clocksource_cf_dt.shift);
- return clocksource_register(&clocksource_cf_dt);
+ return clocksource_register_hz(&clocksource_cf_dt, DMA_FREQ);
}
arch_initcall(init_cf_dt_clocksource);
diff --git a/arch/m68k/platform/coldfire/pit.c b/arch/m68k/platform/coldfire/pit.c
index c2b9809..02663d2 100644
--- a/arch/m68k/platform/coldfire/pit.c
+++ b/arch/m68k/platform/coldfire/pit.c
@@ -144,7 +144,6 @@
.name = "pit",
.rating = 100,
.read = pit_read_clk,
- .shift = 20,
.mask = CLOCKSOURCE_MASK(32),
};
@@ -162,8 +161,7 @@
setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
- pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift);
- clocksource_register(&pit_clk);
+ clocksource_register_hz(&pit_clk, FREQ);
}
/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/sltimers.c b/arch/m68k/platform/coldfire/sltimers.c
index 6a85daf..b7f822b 100644
--- a/arch/m68k/platform/coldfire/sltimers.c
+++ b/arch/m68k/platform/coldfire/sltimers.c
@@ -114,7 +114,6 @@
.name = "slt",
.rating = 250,
.read = mcfslt_read_clk,
- .shift = 20,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -136,8 +135,7 @@
setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq);
- mcfslt_clk.mult = clocksource_hz2mult(MCF_BUSCLK, mcfslt_clk.shift);
- clocksource_register(&mcfslt_clk);
+ clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK);
#ifdef CONFIG_HIGHPROFILE
mcfslt_profile_init();
diff --git a/arch/m68k/platform/coldfire/timers.c b/arch/m68k/platform/coldfire/timers.c
index 60242f6..0d90da3 100644
--- a/arch/m68k/platform/coldfire/timers.c
+++ b/arch/m68k/platform/coldfire/timers.c
@@ -88,7 +88,6 @@
.name = "tmr",
.rating = 250,
.read = mcftmr_read_clk,
- .shift = 20,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -109,8 +108,7 @@
__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
- mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift);
- clocksource_register(&mcftmr_clk);
+ clocksource_register_hz(&mcftmr_clk, FREQ);
setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);