| /* |
| * Copyright 2014-2016 Toradex AG |
| * Copyright 2012 Freescale Semiconductor, Inc. |
| * Copyright 2011 Linaro Ltd. |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "Toradex Apalis iMX6Q/D Module"; |
| compatible = "toradex,apalis_imx6q", "fsl,imx6q"; |
| |
| backlight: backlight { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm4 0 5000000>; |
| status = "disabled"; |
| }; |
| |
| /* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */ |
| i2cddc: i2c@0 { |
| compatible = "i2c-gpio"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c_ddc>; |
| gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */ |
| &gpio2 30 GPIO_ACTIVE_HIGH /* scl */ |
| >; |
| i2c-gpio,delay-us = <2>; /* ~100 kHz */ |
| status = "disabled"; |
| }; |
| |
| reg_1p8v: regulator-1p8v { |
| compatible = "regulator-fixed"; |
| regulator-name = "1P8V"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| |
| reg_2p5v: regulator-2p5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "2P5V"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| regulator-always-on; |
| }; |
| |
| reg_3p3v: regulator-3p3v { |
| compatible = "regulator-fixed"; |
| regulator-name = "3P3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_usb_otg_vbus: regulator-usb-otg-vbus { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>; |
| regulator-name = "usb_otg_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| status = "disabled"; |
| }; |
| |
| /* on module USB hub */ |
| reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>; |
| regulator-name = "usb_host_vbus_hub"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>; |
| startup-delay-us = <2000>; |
| enable-active-high; |
| status = "okay"; |
| }; |
| |
| reg_usb_host_vbus: regulator-usb-host-vbus { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; |
| regulator-name = "usb_host_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| vin-supply = <®_usb_host_vbus_hub>; |
| status = "disabled"; |
| }; |
| |
| sound { |
| compatible = "fsl,imx-audio-sgtl5000"; |
| model = "imx6q-apalis-sgtl5000"; |
| ssi-controller = <&ssi1>; |
| audio-codec = <&codec>; |
| audio-routing = |
| "LINE_IN", "Line In Jack", |
| "MIC_IN", "Mic Jack", |
| "Mic Jack", "Mic Bias", |
| "Headphone Jack", "HP_OUT"; |
| mux-int-port = <1>; |
| mux-ext-port = <4>; |
| }; |
| |
| sound_spdif: sound-spdif { |
| compatible = "fsl,imx-audio-spdif"; |
| model = "imx-spdif"; |
| spdif-controller = <&spdif>; |
| spdif-in; |
| spdif-out; |
| status = "disabled"; |
| }; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux>; |
| status = "okay"; |
| }; |
| |
| &can1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| status = "disabled"; |
| }; |
| |
| &can2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| status = "disabled"; |
| }; |
| |
| /* Apalis SPI1 */ |
| &ecspi1 { |
| fsl,spi-num-chipselects = <1>; |
| cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| status = "disabled"; |
| }; |
| |
| /* Apalis SPI2 */ |
| &ecspi2 { |
| fsl,spi-num-chipselects = <1>; |
| cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi2>; |
| status = "disabled"; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet>; |
| phy-mode = "rgmii"; |
| phy-handle = <ðphy>; |
| phy-reset-duration = <10>; |
| phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy: ethernet-phy@7 { |
| interrupt-parent = <&gpio1>; |
| interrupts = <30 IRQ_TYPE_LEVEL_LOW>; |
| reg = <7>; |
| }; |
| }; |
| }; |
| |
| /* |
| * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier |
| * board) |
| */ |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "disabled"; |
| }; |
| |
| /* |
| * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and |
| * touch screen controller |
| */ |
| &i2c2 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| |
| pmic: pfuze100@08 { |
| compatible = "fsl,pfuze100"; |
| reg = <0x08>; |
| |
| regulators { |
| sw1a_reg: sw1ab { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw1c_reg: sw1c { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw3a_reg: sw3a { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen1_reg: vgen1 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen2_reg: vgen2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen3_reg: vgen3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen4_reg: vgen4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vgen5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vgen6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| codec: sgtl5000@0a { |
| compatible = "fsl,sgtl5000"; |
| reg = <0x0a>; |
| clocks = <&clks IMX6QDL_CLK_CKO>; |
| VDDA-supply = <®_2p5v>; |
| VDDIO-supply = <®_3p3v>; |
| }; |
| |
| /* STMPE811 touch screen controller */ |
| stmpe811@41 { |
| compatible = "st,stmpe811"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_touch_int>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x41>; |
| interrupts = <10 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-parent = <&gpio4>; |
| interrupt-controller; |
| id = <0>; |
| blocks = <0x5>; |
| irq-trigger = <0x1>; |
| |
| stmpe_touchscreen { |
| compatible = "st,stmpe-ts"; |
| reg = <0>; |
| /* 3.25 MHz ADC clock speed */ |
| st,adc-freq = <1>; |
| /* 8 sample average control */ |
| st,ave-ctrl = <3>; |
| /* 7 length fractional part in z */ |
| st,fraction-z = <7>; |
| /* |
| * 50 mA typical 80 mA max touchscreen drivers |
| * current limit value |
| */ |
| st,i-drive = <1>; |
| /* 12-bit ADC */ |
| st,mod-12b = <1>; |
| /* internal ADC reference */ |
| st,ref-sel = <0>; |
| /* ADC converstion time: 80 clocks */ |
| st,sample-time = <4>; |
| /* 1 ms panel driver settling time */ |
| st,settling = <3>; |
| /* 5 ms touch detect interrupt delay */ |
| st,touch-det-delay = <5>; |
| }; |
| }; |
| }; |
| |
| /* |
| * GEN2_I2C, CAM: I2C3_SDA/SCL on MXM3 201/203 (unused) |
| */ |
| &i2c3 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "recovery"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| pinctrl-1 = <&pinctrl_i2c3_recovery>; |
| scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; |
| sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; |
| status = "disabled"; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm1>; |
| status = "disabled"; |
| }; |
| |
| &pwm2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm2>; |
| status = "disabled"; |
| }; |
| |
| &pwm3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm3>; |
| status = "disabled"; |
| }; |
| |
| &pwm4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm4>; |
| status = "disabled"; |
| }; |
| |
| &spdif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spdif>; |
| status = "disabled"; |
| }; |
| |
| &ssi1 { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; |
| fsl,dte-mode; |
| uart-has-rtscts; |
| status = "disabled"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2_dte>; |
| fsl,dte-mode; |
| uart-has-rtscts; |
| status = "disabled"; |
| }; |
| |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4_dte>; |
| fsl,dte-mode; |
| status = "disabled"; |
| }; |
| |
| &uart5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart5_dte>; |
| fsl,dte-mode; |
| status = "disabled"; |
| }; |
| |
| &usbotg { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg>; |
| disable-over-current; |
| status = "disabled"; |
| }; |
| |
| /* MMC1 */ |
| &usdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| vqmmc-supply = <®_3p3v>; |
| bus-width = <8>; |
| voltage-ranges = <3300 3300>; |
| status = "disabled"; |
| }; |
| |
| /* SD1 */ |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| vqmmc-supply = <®_3p3v>; |
| bus-width = <4>; |
| voltage-ranges = <3300 3300>; |
| status = "disabled"; |
| }; |
| |
| /* eMMC */ |
| &usdhc3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| vqmmc-supply = <®_3p3v>; |
| bus-width = <8>; |
| voltage-ranges = <3300 3300>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &weim { |
| status = "disabled"; |
| }; |
| |
| &iomuxc { |
| /* pins used on module */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reset_moci>; |
| |
| pinctrl_apalis_gpio1: gpio2io04grp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0 |
| >; |
| }; |
| |
| pinctrl_apalis_gpio2: gpio2io05grp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0 |
| >; |
| }; |
| |
| pinctrl_apalis_gpio3: gpio2io06grp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0 |
| >; |
| }; |
| |
| pinctrl_apalis_gpio4: gpio2io07grp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0 |
| >; |
| }; |
| |
| pinctrl_apalis_gpio5: gpio6io10grp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0 |
| >; |
| }; |
| |
| pinctrl_apalis_gpio6: gpio6io09grp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0 |
| >; |
| }; |
| |
| pinctrl_apalis_gpio7: gpio1io02grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0 |
| >; |
| }; |
| |
| pinctrl_apalis_gpio8: gpio1io06grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0 |
| >; |
| }; |
| |
| pinctrl_audmux: audmuxgrp { |
| fsl,pins = < |
| MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 |
| MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 |
| MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 |
| MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 |
| /* SGTL5000 sys_mclk */ |
| MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 |
| >; |
| }; |
| |
| pinctrl_cam_mclk: cammclkgrp { |
| fsl,pins = < |
| /* CAM sys_mclk */ |
| MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0 |
| >; |
| }; |
| |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1 |
| MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1 |
| MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1 |
| /* SPI1 cs */ |
| MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1 |
| >; |
| }; |
| |
| pinctrl_ecspi2: ecspi2grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 |
| MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 |
| MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 |
| /* SPI2 cs */ |
| MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 |
| >; |
| }; |
| |
| pinctrl_enet: enetgrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 |
| MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 |
| MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 |
| MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 |
| MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 |
| MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 |
| MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 |
| MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 |
| MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 |
| MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 |
| MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 |
| MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 |
| MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 |
| MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 |
| MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 |
| /* Ethernet PHY reset */ |
| MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0 |
| /* Ethernet PHY interrupt */ |
| MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x000b1 |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 |
| MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 |
| MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_gpio_keys: gpio1io04grp { |
| fsl,pins = < |
| /* Power button */ |
| MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_hdmi_cec: hdmicecgrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 |
| >; |
| }; |
| |
| pinctrl_i2c_ddc: gpioi2cddcgrp { |
| fsl,pins = < |
| /* DDC bitbang */ |
| MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 |
| MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 |
| MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 |
| MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3_recovery: i2c3recoverygrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1 |
| MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */ |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0xb0b1 |
| MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0xb0b1 |
| MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0xb0b1 |
| MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0xb0b1 |
| MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0xb0b1 |
| MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0xb0b1 |
| MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0xb0b1 |
| MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0xb0b1 |
| MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1 |
| MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0xb0b1 |
| MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0xb0b1 |
| >; |
| }; |
| |
| pinctrl_ipu1_lcdif: ipu1lcdifgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x61 |
| /* DE */ |
| MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x61 |
| /* HSync */ |
| MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x61 |
| /* VSync */ |
| MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x61 |
| MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x61 |
| MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x61 |
| MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x61 |
| MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x61 |
| MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x61 |
| MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x61 |
| MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x61 |
| MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x61 |
| MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x61 |
| MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x61 |
| MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x61 |
| MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x61 |
| MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x61 |
| MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x61 |
| MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x61 |
| MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x61 |
| MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x61 |
| MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x61 |
| MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x61 |
| MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x61 |
| MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x61 |
| MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x61 |
| MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x61 |
| MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x61 |
| >; |
| }; |
| |
| pinctrl_ipu2_vdac: ipu2vdacgrp { |
| fsl,pins = < |
| MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1 |
| MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0xd1 |
| MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0xd1 |
| MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0xd1 |
| MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0xf9 |
| MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0xf9 |
| MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0xf9 |
| MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0xf9 |
| MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0xf9 |
| MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0xf9 |
| MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0xf9 |
| MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0xf9 |
| MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0xf9 |
| MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0xf9 |
| MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0xf9 |
| MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0xf9 |
| MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0xf9 |
| MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0xf9 |
| MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0xf9 |
| MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0xf9 |
| >; |
| }; |
| |
| pinctrl_mmc_cd: gpiommccdgrp { |
| fsl,pins = < |
| /* MMC1 CD */ |
| MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0 |
| >; |
| }; |
| |
| pinctrl_pwm1: pwm1grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_pwm2: pwm2grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_pwm3: pwm3grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_pwm4: pwm4grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp { |
| fsl,pins = < |
| /* USBH_EN */ |
| MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058 |
| >; |
| }; |
| |
| pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp { |
| fsl,pins = < |
| /* USBH_HUB_EN */ |
| MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058 |
| >; |
| }; |
| |
| pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp { |
| fsl,pins = < |
| /* USBO1 power en */ |
| MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058 |
| >; |
| }; |
| |
| pinctrl_reset_moci: gpioresetmocigrp { |
| fsl,pins = < |
| /* RESET_MOCI control */ |
| MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058 |
| >; |
| }; |
| |
| pinctrl_sd_cd: gpiosdcdgrp { |
| fsl,pins = < |
| /* SD1 CD */ |
| MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0 |
| >; |
| }; |
| |
| pinctrl_spdif: spdifgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 |
| MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_touch_int: gpiotouchintgrp { |
| fsl,pins = < |
| /* STMPE811 interrupt */ |
| MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_uart1_dce: uart1dcegrp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| /* DTE mode */ |
| pinctrl_uart1_dte: uart1dtegrp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1 |
| MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1 |
| >; |
| }; |
| |
| /* Additional DTR, DSR, DCD */ |
| pinctrl_uart1_ctrl: uart1ctrlgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 |
| MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 |
| MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_uart2_dce: uart2dcegrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| /* DTE mode */ |
| pinctrl_uart2_dte: uart2dtegrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart4_dce: uart4dcegrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| /* DTE mode */ |
| pinctrl_uart4_dte: uart4dtegrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart5_dce: uart5dcegrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| /* DTE mode */ |
| pinctrl_uart5_dte: uart5dtegrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usbotg: usbotggrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 |
| MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 |
| MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 |
| MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 |
| MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 |
| MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 |
| MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071 |
| MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071 |
| MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071 |
| MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 |
| MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 |
| MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 |
| MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 |
| MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 |
| MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 |
| MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 |
| MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 |
| MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 |
| /* eMMC reset */ |
| MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 |
| MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 |
| MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 |
| MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 |
| MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 |
| /* eMMC reset */ |
| MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 |
| MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 |
| MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 |
| MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 |
| MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 |
| /* eMMC reset */ |
| MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 |
| >; |
| }; |
| }; |