| /* |
| * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/pwm/pwm.h> |
| |
| / { |
| aliases { |
| can0 = &can2; |
| can1 = &can1; |
| display = &display; |
| i2c0 = &i2c2; |
| i2c1 = &i2c_gpio; |
| i2c2 = &i2c1; |
| i2c3 = &i2c3; |
| i2c4 = &i2c4; |
| lcdif_23bit_pins_a = &pinctrl_disp0_1; |
| lcdif_24bit_pins_a = &pinctrl_disp0_2; |
| pwm0 = &pwm5; |
| reg_can_xcvr = ®_can_xcvr; |
| serial2 = &uart5; |
| serial4 = &uart3; |
| spi0 = &ecspi2; |
| spi1 = &spi_gpio; |
| stk5led = &user_led; |
| usbh1 = &usbotg2; |
| usbotg = &usbotg1; |
| }; |
| |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| memory { |
| reg = <0 0>; /* will be filled by U-Boot */ |
| }; |
| |
| clocks { |
| mclk: mclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <26000000>; |
| }; |
| }; |
| |
| backlight: backlight { |
| compatible = "pwm-backlight"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lcd_rst>; |
| enable-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; |
| pwms = <&pwm5 0 500000 PWM_POLARITY_INVERTED>; |
| power-supply = <®_lcd_pwr>; |
| /* |
| * a poor man's way to create a 1:1 relationship between |
| * the PWM value and the actual duty cycle |
| */ |
| brightness-levels = < 0 1 2 3 4 5 6 7 8 9 |
| 10 11 12 13 14 15 16 17 18 19 |
| 20 21 22 23 24 25 26 27 28 29 |
| 30 31 32 33 34 35 36 37 38 39 |
| 40 41 42 43 44 45 46 47 48 49 |
| 50 51 52 53 54 55 56 57 58 59 |
| 60 61 62 63 64 65 66 67 68 69 |
| 70 71 72 73 74 75 76 77 78 79 |
| 80 81 82 83 84 85 86 87 88 89 |
| 90 91 92 93 94 95 96 97 98 99 |
| 100>; |
| default-brightness-level = <50>; |
| }; |
| |
| i2c_gpio: i2c-gpio { |
| compatible = "i2c-gpio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c_gpio>; |
| gpios = < |
| &gpio5 1 GPIO_ACTIVE_HIGH /* SDA */ |
| &gpio5 0 GPIO_ACTIVE_HIGH /* SCL */ |
| >; |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| ds1339: rtc@68 { |
| compatible = "dallas,ds1339"; |
| reg = <0x68>; |
| status = "disabled"; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| user_led: user { |
| label = "Heartbeat"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_led>; |
| gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| |
| reg_3v3_etn: regulator-3v3etn { |
| compatible = "regulator-fixed"; |
| regulator-name = "3V3_ETN"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_etnphy_power>; |
| gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_2v5: regulator-2v5 { |
| compatible = "regulator-fixed"; |
| regulator-name = "2V5"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| regulator-always-on; |
| }; |
| |
| reg_3v3: regulator-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_can_xcvr: regulator-canxcvr { |
| compatible = "regulator-fixed"; |
| regulator-name = "CAN XCVR"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan_xcvr>; |
| gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; |
| enable-active-low; |
| }; |
| |
| reg_lcd_pwr: regulator-lcdpwr { |
| compatible = "regulator-fixed"; |
| regulator-name = "LCD POWER"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lcd_pwr>; |
| gpio = <&gpio5 4 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_usbh1_vbus: regulator-usbh1vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usbh1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbh1_vbus &pinctrl_usbh1_oc>; |
| gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usbotg_vbus: regulator-usbotgvbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usbotg_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg_vbus &pinctrl_usbotg_oc>; |
| gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| spi_gpio: spi-gpio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "spi-gpio"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spi_gpio>; |
| gpio-mosi = <&gpio1 30 GPIO_ACTIVE_HIGH>; |
| gpio-miso = <&gpio1 31 GPIO_ACTIVE_HIGH>; |
| gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>; |
| num-chipselects = <2>; |
| cs-gpios = < |
| &gpio1 29 GPIO_ACTIVE_HIGH |
| &gpio1 10 GPIO_ACTIVE_HIGH |
| >; |
| status = "disabled"; |
| |
| spi@0 { |
| compatible = "spidev"; |
| reg = <0>; |
| spi-max-frequency = <660000>; |
| }; |
| |
| spi@1 { |
| compatible = "spidev"; |
| reg = <1>; |
| spi-max-frequency = <660000>; |
| }; |
| }; |
| |
| sound { |
| compatible = "karo,imx6ul-tx6ul-sgtl5000", |
| "simple-audio-card"; |
| simple-audio-card,name = "imx6ul-tx6ul-sgtl5000-audio"; |
| simple-audio-card,format = "i2s"; |
| simple-audio-card,bitclock-master = <&codec_dai>; |
| simple-audio-card,frame-master = <&codec_dai>; |
| simple-audio-card,widgets = |
| "Microphone", "Mic Jack", |
| "Line", "Line In", |
| "Line", "Line Out", |
| "Headphone", "Headphone Jack"; |
| simple-audio-card,routing = |
| "MIC_IN", "Mic Jack", |
| "Mic Jack", "Mic Bias", |
| "Headphone Jack", "HP_OUT"; |
| |
| cpu_dai: simple-audio-card,cpu { |
| sound-dai = <&sai2>; |
| }; |
| |
| codec_dai: simple-audio-card,codec { |
| sound-dai = <&sgtl5000>; |
| }; |
| }; |
| }; |
| |
| &can1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| xceiver-supply = <®_can_xcvr>; |
| status = "okay"; |
| }; |
| |
| &can2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| xceiver-supply = <®_can_xcvr>; |
| status = "okay"; |
| }; |
| |
| &ecspi2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi2>; |
| fsl,spi-num-chipselects = <2>; |
| cs-gpios = < |
| &gpio1 29 GPIO_ACTIVE_HIGH |
| &gpio1 10 GPIO_ACTIVE_HIGH |
| >; |
| status = "disabled"; |
| |
| spidev0: spi@0 { |
| compatible = "spidev"; |
| reg = <0>; |
| spi-max-frequency = <60000000>; |
| }; |
| |
| spidev1: spi@1 { |
| compatible = "spidev"; |
| reg = <1>; |
| spi-max-frequency = <60000000>; |
| }; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>; |
| phy-mode = "rmii"; |
| phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>; |
| phy-supply = <®_3v3_etn>; |
| phy-handle = <&etnphy0>; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| etnphy0: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_etnphy0_int>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <5 IRQ_TYPE_EDGE_FALLING>; |
| status = "okay"; |
| }; |
| |
| etnphy1: ethernet-phy@2 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_etnphy1_int>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <27 IRQ_TYPE_EDGE_FALLING>; |
| status = "okay"; |
| }; |
| }; |
| }; |
| |
| &fec2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>; |
| phy-mode = "rmii"; |
| phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; |
| phy-supply = <®_3v3_etn>; |
| phy-handle = <&etnphy1>; |
| status = "disabled"; |
| }; |
| |
| &gpmi { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpmi_nand>; |
| nand-on-flash-bbt; |
| fsl,no-blockmark-swap; |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| sgtl5000: codec@0a { |
| compatible = "fsl,sgtl5000"; |
| reg = <0x0a>; |
| #sound-dai-cells = <0>; |
| VDDA-supply = <®_2v5>; |
| VDDIO-supply = <®_3v3>; |
| clocks = <&mclk>; |
| }; |
| |
| polytouch: polytouch@38 { |
| compatible = "edt,edt-ft5x06"; |
| reg = <0x38>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_edt_ft5x06>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <2 IRQ_TYPE_EDGE_FALLING>; |
| reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; |
| wake-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; |
| wakeup-source; |
| }; |
| |
| touchscreen: touchscreen@48 { |
| compatible = "ti,tsc2007"; |
| reg = <0x48>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_tsc2007>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <26 IRQ_TYPE_NONE>; |
| gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; |
| ti,x-plate-ohms = <660>; |
| wakeup-source; |
| }; |
| }; |
| |
| &kpp { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_kpp>; |
| /* sample keymap */ |
| /* row/col 0..3 are mapped to KPP row/col 4..7 */ |
| linux,keymap = < |
| MATRIX_KEY(4, 4, KEY_POWER) |
| MATRIX_KEY(4, 5, KEY_KP0) |
| MATRIX_KEY(4, 6, KEY_KP1) |
| MATRIX_KEY(4, 7, KEY_KP2) |
| MATRIX_KEY(5, 4, KEY_KP3) |
| MATRIX_KEY(5, 5, KEY_KP4) |
| MATRIX_KEY(5, 6, KEY_KP5) |
| MATRIX_KEY(5, 7, KEY_KP6) |
| MATRIX_KEY(6, 4, KEY_KP7) |
| MATRIX_KEY(6, 5, KEY_KP8) |
| MATRIX_KEY(6, 6, KEY_KP9) |
| >; |
| status = "okay"; |
| }; |
| |
| &lcdif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_disp0_1>; |
| lcd-supply = <®_lcd_pwr>; |
| display = <&display>; |
| status = "okay"; |
| |
| display: display@di0 { |
| bits-per-pixel = <32>; |
| bus-width = <24>; |
| status = "okay"; |
| |
| display-timings { |
| VGA { |
| clock-frequency = <25200000>; |
| hactive = <640>; |
| vactive = <480>; |
| hback-porch = <48>; |
| hsync-len = <96>; |
| hfront-porch = <16>; |
| vback-porch = <31>; |
| vsync-len = <2>; |
| vfront-porch = <12>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| de-active = <1>; |
| pixelclk-active = <1>; |
| }; |
| |
| ETV570 { |
| clock-frequency = <25200000>; |
| hactive = <640>; |
| vactive = <480>; |
| hback-porch = <114>; |
| hsync-len = <30>; |
| hfront-porch = <16>; |
| vback-porch = <32>; |
| vsync-len = <3>; |
| vfront-porch = <10>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| de-active = <1>; |
| pixelclk-active = <1>; |
| }; |
| |
| ET0350 { |
| clock-frequency = <6413760>; |
| hactive = <320>; |
| vactive = <240>; |
| hback-porch = <34>; |
| hsync-len = <34>; |
| hfront-porch = <20>; |
| vback-porch = <15>; |
| vsync-len = <3>; |
| vfront-porch = <4>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| de-active = <1>; |
| pixelclk-active = <1>; |
| }; |
| |
| ET0430 { |
| clock-frequency = <9009000>; |
| hactive = <480>; |
| vactive = <272>; |
| hback-porch = <2>; |
| hsync-len = <41>; |
| hfront-porch = <2>; |
| vback-porch = <2>; |
| vsync-len = <10>; |
| vfront-porch = <2>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| de-active = <1>; |
| pixelclk-active = <0>; |
| }; |
| |
| ET0500 { |
| clock-frequency = <33264000>; |
| hactive = <800>; |
| vactive = <480>; |
| hback-porch = <88>; |
| hsync-len = <128>; |
| hfront-porch = <40>; |
| vback-porch = <33>; |
| vsync-len = <2>; |
| vfront-porch = <10>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| de-active = <1>; |
| pixelclk-active = <1>; |
| }; |
| |
| ET0700 { /* same as ET0500 */ |
| clock-frequency = <33264000>; |
| hactive = <800>; |
| vactive = <480>; |
| hback-porch = <88>; |
| hsync-len = <128>; |
| hfront-porch = <40>; |
| vback-porch = <33>; |
| vsync-len = <2>; |
| vfront-porch = <10>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| de-active = <1>; |
| pixelclk-active = <1>; |
| }; |
| |
| ETQ570 { |
| clock-frequency = <6596040>; |
| hactive = <320>; |
| vactive = <240>; |
| hback-porch = <38>; |
| hsync-len = <30>; |
| hfront-porch = <30>; |
| vback-porch = <16>; |
| vsync-len = <3>; |
| vfront-porch = <4>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| de-active = <1>; |
| pixelclk-active = <1>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pwm5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm5>; |
| #pwm-cells = <3>; |
| status = "okay"; |
| }; |
| |
| &sai2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai2>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &uart5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart5 &pinctrl_uart5_rtscts>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &usbotg1 { |
| vbus-supply = <®_usbotg_vbus>; |
| dr_mode = "peripheral"; |
| disable-over-current; |
| status = "okay"; |
| }; |
| |
| &usbotg2 { |
| vbus-supply = <®_usbh1_vbus>; |
| dr_mode = "host"; |
| disable-over-current; |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_cd>; |
| bus-width = <4>; |
| no-1-8-v; |
| cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; |
| fsl,wp-controller; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog>; |
| |
| pinctrl_hog: hoggrp { |
| }; |
| |
| pinctrl_led: ledgrp { |
| fsl,pins = < |
| MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x0b0b0 /* LED */ |
| >; |
| }; |
| |
| pinctrl_disp0_1: disp0grp-1 { |
| fsl,pins = < |
| MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */ |
| MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */ |
| MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x10 /* HSYNC */ |
| MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x10 /* VSYNC */ |
| /* PAD DISP0_DAT0 is used for the Flexcan transceiver control on STK5-v5 */ |
| MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x10 |
| MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x10 |
| MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x10 |
| MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x10 |
| MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x10 |
| MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x10 |
| MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x10 |
| MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x10 |
| MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x10 |
| MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x10 |
| MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x10 |
| MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x10 |
| MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x10 |
| MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x10 |
| MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x10 |
| MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x10 |
| MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x10 |
| MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x10 |
| MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x10 |
| MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x10 |
| MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x10 |
| MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x10 |
| MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x10 |
| >; |
| }; |
| |
| pinctrl_disp0_2: disp0grp-2 { |
| fsl,pins = < |
| MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */ |
| MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */ |
| MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x10 /* HSYNC */ |
| MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x10 /* VSYNC */ |
| MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x10 |
| MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x10 |
| MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x10 |
| MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x10 |
| MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x10 |
| MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x10 |
| MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x10 |
| MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x10 |
| MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x10 |
| MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x10 |
| MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x10 |
| MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x10 |
| MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x10 |
| MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x10 |
| MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x10 |
| MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x10 |
| MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x10 |
| MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x10 |
| MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x10 |
| MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x10 |
| MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x10 |
| MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x10 |
| MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x10 |
| MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x10 |
| >; |
| }; |
| |
| pinctrl_ecspi2: ecspi2grp { |
| fsl,pins = < |
| MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x0b0b0 /* CSPI_SS */ |
| MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0b0b0 /* CSPI_SS */ |
| MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x0b0b0 /* CSPI_MOSI */ |
| MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x0b0b0 /* CSPI_MISO */ |
| MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x0b0b0 /* CSPI_SCLK */ |
| >; |
| }; |
| |
| pinctrl_edt_ft5x06: edt-ft5x06grp { |
| fsl,pins = < |
| MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* Interrupt */ |
| MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* Reset */ |
| MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Wake */ |
| >; |
| }; |
| |
| pinctrl_enet1: enet1grp { |
| fsl,pins = < |
| MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x000b0 |
| MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x000b0 |
| MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x000b0 |
| MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x000b0 |
| MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x000b0 |
| MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x000b0 |
| MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x000b0 |
| MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x400000b1 |
| >; |
| }; |
| |
| pinctrl_enet2: enet2grp { |
| fsl,pins = < |
| MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x000b0 |
| MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x000b0 |
| MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x000b0 |
| MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x000b0 |
| MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x000b0 |
| MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x000b0 |
| MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x000b0 |
| MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x400000b1 |
| >; |
| }; |
| |
| pinctrl_enet1_mdio: enet1-mdiogrp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x0b0b0 |
| MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_etnphy_power: etnphy-pwrgrp { |
| fsl,pins = < |
| MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0b0b0 /* ETN PHY POWER */ |
| >; |
| }; |
| |
| pinctrl_etnphy0_int: etnphy-intgrp-0 { |
| fsl,pins = < |
| MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 /* ETN PHY INT */ |
| >; |
| }; |
| |
| pinctrl_etnphy0_rst: etnphy-rstgrp-0 { |
| fsl,pins = < |
| MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0 /* ETN PHY RESET */ |
| >; |
| }; |
| |
| pinctrl_etnphy1_int: etnphy-intgrp-1 { |
| fsl,pins = < |
| MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x0b0b0 /* ETN PHY INT */ |
| >; |
| }; |
| |
| pinctrl_etnphy1_rst: etnphy-rstgrp-1 { |
| fsl,pins = < |
| MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x0b0b0 /* ETN PHY RESET */ |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1grp { |
| fsl,pins = < |
| MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 |
| MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = < |
| MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0 |
| MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_flexcan_xcvr: flexcan-xcvrgrp { |
| fsl,pins = < |
| MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x0b0b0 /* Flexcan XCVR enable */ |
| >; |
| }; |
| |
| pinctrl_gpmi_nand: gpminandgrp { |
| fsl,pins = < |
| MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1 |
| MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1 |
| MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1 |
| MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000 |
| MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1 |
| MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1 |
| MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1 |
| MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1 |
| MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1 |
| MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1 |
| MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1 |
| MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1 |
| MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1 |
| MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1 |
| MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_i2c_gpio: i2c-gpiogrp { |
| fsl,pins = < |
| MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x4001b8b1 /* I2C SCL */ |
| MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x4001b8b1 /* I2C SDA */ |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b1 |
| MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_kpp: kppgrp { |
| fsl,pins = < |
| MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04 0x1b0b0 |
| MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05 0x1b0b0 |
| MX6UL_PAD_ENET2_TX_EN__KPP_COL06 0x1b0b0 |
| MX6UL_PAD_ENET2_RX_ER__KPP_COL07 0x1b0b0 |
| MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04 0x1b0b0 |
| MX6UL_PAD_ENET2_RX_EN__KPP_ROW05 0x1b0b0 |
| MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06 0x1b0b0 |
| MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_lcd_pwr: lcd-pwrgrp { |
| fsl,pins = < |
| MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 /* LCD Power Enable */ |
| >; |
| }; |
| |
| pinctrl_lcd_rst: lcd-rstgrp { |
| fsl,pins = < |
| MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0 /* LCD Reset */ |
| >; |
| }; |
| |
| pinctrl_pwm5: pwm5grp { |
| fsl,pins = < |
| MX6UL_PAD_NAND_DQS__PWM5_OUT 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_sai2: sai2grp { |
| fsl,pins = < |
| MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x0b0b0 /* SSI1_RXD */ |
| MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x0b0b0 /* SSI1_TXD */ |
| MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x0b0b0 /* SSI1_CLK */ |
| MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x0b0b0 /* SSI1_FS */ |
| >; |
| }; |
| |
| pinctrl_spi_gpio: spi-gpiogrp { |
| fsl,pins = < |
| MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x0b0b0 /* CSPI_SS */ |
| MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0b0b0 /* CSPI_SS */ |
| MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x0b0b0 /* CSPI_MOSI */ |
| MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x0b0b0 /* CSPI_MISO */ |
| MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x0b0b0 /* CSPI_SCLK */ |
| >; |
| }; |
| |
| pinctrl_tsc2007: tsc2007grp { |
| fsl,pins = < |
| MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x1b0b0 /* Interrupt */ |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x0b0b0 |
| MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_uart1_rtscts: uart1-rtsctsgrp { |
| fsl,pins = < |
| MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x0b0b0 |
| MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0b0b0 |
| MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_uart2_rtscts: uart2-rtsctsgrp { |
| fsl,pins = < |
| MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x0b0b0 |
| MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_uart5: uart5grp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x0b0b0 |
| MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_uart5_rtscts: uart5-rtsctsgrp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x0b0b0 |
| MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_usbh1_oc: usbh1-ocgrp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x17059 /* USBH1_OC */ |
| >; |
| }; |
| |
| pinctrl_usbh1_vbus: usbh1-vbusgrp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x0b0b0 /* USBH1_VBUSEN */ |
| >; |
| }; |
| |
| pinctrl_usbotg_oc: usbotg-ocgrp { |
| fsl,pins = < |
| MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x17059 /* USBOTG_OC */ |
| >; |
| }; |
| |
| pinctrl_usbotg_vbus: usbotg-vbusgrp { |
| fsl,pins = < |
| MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x1b0b0 /* USBOTG_VBUSEN */ |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x070b1 |
| MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x07099 |
| MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x070b1 |
| MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x070b1 |
| MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x070b1 |
| MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x070b1 |
| >; |
| }; |
| |
| pinctrl_usdhc1_cd: usdhc1cdgrp { |
| fsl,pins = < |
| MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x170b0 /* SD1 CD */ |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x070b1 |
| MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x070b1 |
| MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x070b1 |
| MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x070b1 |
| MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x070b1 |
| MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x070b1 |
| /* eMMC RESET */ |
| MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x170b0 |
| >; |
| }; |
| }; |