| /* |
| * Copyright 2015 Freescale Semiconductor, Inc. |
| * Copyright 2016 Toradex AG |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include "imx7s.dtsi" |
| |
| / { |
| cpus { |
| cpu1: cpu@1 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <1>; |
| }; |
| }; |
| |
| etm@3007d000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0x3007d000 0x1000>; |
| |
| /* |
| * System will hang if added nosmp in kernel command line |
| * without arm,primecell-periphid because amba bus try to |
| * read id and core1 power off at this time. |
| */ |
| arm,primecell-periphid = <0xbb956>; |
| cpu = <&cpu1>; |
| clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; |
| clock-names = "apb_pclk"; |
| |
| port { |
| etm1_out_port: endpoint { |
| remote-endpoint = <&ca_funnel_in_port1>; |
| }; |
| }; |
| }; |
| }; |
| |
| &aips3 { |
| usbotg2: usb@30b20000 { |
| compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; |
| reg = <0x30b20000 0x200>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_USB_CTRL_CLK>; |
| fsl,usbphy = <&usbphynop2>; |
| fsl,usbmisc = <&usbmisc2 0>; |
| phy-clkgate-delay-us = <400>; |
| status = "disabled"; |
| }; |
| |
| usbmisc2: usbmisc@30b20200 { |
| #index-cells = <1>; |
| compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; |
| reg = <0x30b20200 0x200>; |
| }; |
| |
| usbphynop2: usbphynop2 { |
| compatible = "usb-nop-xceiv"; |
| clocks = <&clks IMX7D_USB_PHY2_CLK>; |
| clock-names = "main_clk"; |
| }; |
| |
| fec2: ethernet@30bf0000 { |
| compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; |
| reg = <0x30bf0000 0x10000>; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, |
| <&clks IMX7D_ENET_AXI_ROOT_CLK>, |
| <&clks IMX7D_ENET2_TIME_ROOT_CLK>, |
| <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, |
| <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; |
| clock-names = "ipg", "ahb", "ptp", |
| "enet_clk_ref", "enet_out"; |
| fsl,num-tx-queues=<3>; |
| fsl,num-rx-queues=<3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| &ca_funnel_ports { |
| port@1 { |
| reg = <1>; |
| ca_funnel_in_port1: endpoint { |
| slave-mode; |
| remote-endpoint = <&etm1_out_port>; |
| }; |
| }; |
| }; |