diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index e04f1ba..6c3618d 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -661,16 +661,34 @@
 void
 e1000_reset(struct e1000_adapter *adapter)
 {
-	uint32_t pba;
+	uint32_t pba = 0, tx_space, min_tx_space, min_rx_space;
 	uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
+	boolean_t legacy_pba_adjust = FALSE;
 
 	/* Repartition Pba for greater than 9k mtu
 	 * To take effect CTRL.RST is required.
 	 */
 
 	switch (adapter->hw.mac_type) {
+	case e1000_82542_rev2_0:
+	case e1000_82542_rev2_1:
+	case e1000_82543:
+	case e1000_82544:
+	case e1000_82540:
+	case e1000_82541:
+	case e1000_82541_rev_2:
+		legacy_pba_adjust = TRUE;
+		pba = E1000_PBA_48K;
+		break;
+	case e1000_82545:
+	case e1000_82545_rev_3:
+	case e1000_82546:
+	case e1000_82546_rev_3:
+		pba = E1000_PBA_48K;
+		break;
 	case e1000_82547:
 	case e1000_82547_rev_2:
+		legacy_pba_adjust = TRUE;
 		pba = E1000_PBA_30K;
 		break;
 	case e1000_82571:
@@ -679,27 +697,80 @@
 		pba = E1000_PBA_38K;
 		break;
 	case e1000_82573:
-		pba = E1000_PBA_12K;
+		pba = E1000_PBA_20K;
 		break;
 	case e1000_ich8lan:
 		pba = E1000_PBA_8K;
-		break;
-	default:
-		pba = E1000_PBA_48K;
+	case e1000_undefined:
+	case e1000_num_macs:
 		break;
 	}
 
-	if ((adapter->hw.mac_type != e1000_82573) &&
-	   (adapter->netdev->mtu > E1000_RXBUFFER_8192))
-		pba -= 8; /* allocate more FIFO for Tx */
+	if (legacy_pba_adjust == TRUE) {
+		if (adapter->netdev->mtu > E1000_RXBUFFER_8192)
+			pba -= 8; /* allocate more FIFO for Tx */
 
+		if (adapter->hw.mac_type == e1000_82547) {
+			adapter->tx_fifo_head = 0;
+			adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
+			adapter->tx_fifo_size =
+				(E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
+			atomic_set(&adapter->tx_fifo_stall, 0);
+		}
+	} else if (adapter->hw.max_frame_size > MAXIMUM_ETHERNET_FRAME_SIZE) {
+		/* adjust PBA for jumbo frames */
+		E1000_WRITE_REG(&adapter->hw, PBA, pba);
 
-	if (adapter->hw.mac_type == e1000_82547) {
-		adapter->tx_fifo_head = 0;
-		adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
-		adapter->tx_fifo_size =
-			(E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
-		atomic_set(&adapter->tx_fifo_stall, 0);
+		/* To maintain wire speed transmits, the Tx FIFO should be
+		 * large enough to accomodate two full transmit packets,
+		 * rounded up to the next 1KB and expressed in KB.  Likewise,
+		 * the Rx FIFO should be large enough to accomodate at least
+		 * one full receive packet and is similarly rounded up and
+		 * expressed in KB. */
+		pba = E1000_READ_REG(&adapter->hw, PBA);
+		/* upper 16 bits has Tx packet buffer allocation size in KB */
+		tx_space = pba >> 16;
+		/* lower 16 bits has Rx packet buffer allocation size in KB */
+		pba &= 0xffff;
+		/* don't include ethernet FCS because hardware appends/strips */
+		min_rx_space = adapter->netdev->mtu + ENET_HEADER_SIZE +
+		               VLAN_TAG_SIZE;
+		min_tx_space = min_rx_space;
+		min_tx_space *= 2;
+		E1000_ROUNDUP(min_tx_space, 1024);
+		min_tx_space >>= 10;
+		E1000_ROUNDUP(min_rx_space, 1024);
+		min_rx_space >>= 10;
+
+		/* If current Tx allocation is less than the min Tx FIFO size,
+		 * and the min Tx FIFO size is less than the current Rx FIFO
+		 * allocation, take space away from current Rx allocation */
+		if (tx_space < min_tx_space &&
+		    ((min_tx_space - tx_space) < pba)) {
+			pba = pba - (min_tx_space - tx_space);
+
+			/* PCI/PCIx hardware has PBA alignment constraints */
+			switch (adapter->hw.mac_type) {
+			case e1000_82545 ... e1000_82546_rev_3:
+				pba &= ~(E1000_PBA_8K - 1);
+				break;
+			default:
+				break;
+			}
+
+			/* if short on rx space, rx wins and must trump tx
+			 * adjustment or use Early Receive if available */
+			if (pba < min_rx_space) {
+				switch (adapter->hw.mac_type) {
+				case e1000_82573:
+					/* ERT enabled in e1000_configure_rx */
+					break;
+				default:
+					pba = min_rx_space;
+					break;
+				}
+			}
+		}
 	}
 
 	E1000_WRITE_REG(&adapter->hw, PBA, pba);