| /* |
| * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de> |
| * PCF50633 backlight device driver |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| |
| #include <linux/backlight.h> |
| #include <linux/fb.h> |
| |
| #include <linux/mfd/pcf50633/core.h> |
| #include <linux/mfd/pcf50633/backlight.h> |
| |
| struct pcf50633_bl { |
| struct pcf50633 *pcf; |
| struct backlight_device *bl; |
| |
| unsigned int brightness; |
| unsigned int brightness_limit; |
| }; |
| |
| /* |
| * pcf50633_bl_set_brightness_limit |
| * |
| * Update the brightness limit for the pc50633 backlight. The actual brightness |
| * will not go above the limit. This is useful to limit power drain for example |
| * on low battery. |
| * |
| * @dev: Pointer to a pcf50633 device |
| * @limit: The brightness limit. Valid values are 0-63 |
| */ |
| int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit) |
| { |
| struct pcf50633_bl *pcf_bl = platform_get_drvdata(pcf->bl_pdev); |
| |
| if (!pcf_bl) |
| return -ENODEV; |
| |
| pcf_bl->brightness_limit = limit & 0x3f; |
| backlight_update_status(pcf_bl->bl); |
| |
| return 0; |
| } |
| |
| static int pcf50633_bl_update_status(struct backlight_device *bl) |
| { |
| struct pcf50633_bl *pcf_bl = bl_get_data(bl); |
| unsigned int new_brightness; |
| |
| |
| if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK) || |
| bl->props.power != FB_BLANK_UNBLANK) |
| new_brightness = 0; |
| else if (bl->props.brightness < pcf_bl->brightness_limit) |
| new_brightness = bl->props.brightness; |
| else |
| new_brightness = pcf_bl->brightness_limit; |
| |
| |
| if (pcf_bl->brightness == new_brightness) |
| return 0; |
| |
| if (new_brightness) { |
| pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDOUT, |
| new_brightness); |
| if (!pcf_bl->brightness) |
| pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDENA, 1); |
| } else { |
| pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDENA, 0); |
| } |
| |
| pcf_bl->brightness = new_brightness; |
| |
| return 0; |
| } |
| |
| static int pcf50633_bl_get_brightness(struct backlight_device *bl) |
| { |
| struct pcf50633_bl *pcf_bl = bl_get_data(bl); |
| return pcf_bl->brightness; |
| } |
| |
| static const struct backlight_ops pcf50633_bl_ops = { |
| .get_brightness = pcf50633_bl_get_brightness, |
| .update_status = pcf50633_bl_update_status, |
| .options = BL_CORE_SUSPENDRESUME, |
| }; |
| |
| static int __devinit pcf50633_bl_probe(struct platform_device *pdev) |
| { |
| struct pcf50633_bl *pcf_bl; |
| struct device *parent = pdev->dev.parent; |
| struct pcf50633_platform_data *pcf50633_data = parent->platform_data; |
| struct pcf50633_bl_platform_data *pdata = pcf50633_data->backlight_data; |
| struct backlight_properties bl_props; |
| |
| pcf_bl = devm_kzalloc(&pdev->dev, sizeof(*pcf_bl), GFP_KERNEL); |
| if (!pcf_bl) |
| return -ENOMEM; |
| |
| bl_props.type = BACKLIGHT_RAW; |
| bl_props.max_brightness = 0x3f; |
| bl_props.power = FB_BLANK_UNBLANK; |
| |
| if (pdata) { |
| bl_props.brightness = pdata->default_brightness; |
| pcf_bl->brightness_limit = pdata->default_brightness_limit; |
| } else { |
| bl_props.brightness = 0x3f; |
| pcf_bl->brightness_limit = 0x3f; |
| } |
| |
| pcf_bl->pcf = dev_to_pcf50633(pdev->dev.parent); |
| |
| pcf_bl->bl = backlight_device_register(pdev->name, &pdev->dev, pcf_bl, |
| &pcf50633_bl_ops, &bl_props); |
| |
| if (IS_ERR(pcf_bl->bl)) |
| return PTR_ERR(pcf_bl->bl); |
| |
| platform_set_drvdata(pdev, pcf_bl); |
| |
| pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDDIM, pdata->ramp_time); |
| |
| /* Should be different from bl_props.brightness, so we do not exit |
| * update_status early the first time it's called */ |
| pcf_bl->brightness = pcf_bl->bl->props.brightness + 1; |
| |
| backlight_update_status(pcf_bl->bl); |
| |
| return 0; |
| } |
| |
| static int __devexit pcf50633_bl_remove(struct platform_device *pdev) |
| { |
| struct pcf50633_bl *pcf_bl = platform_get_drvdata(pdev); |
| |
| backlight_device_unregister(pcf_bl->bl); |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| static struct platform_driver pcf50633_bl_driver = { |
| .probe = pcf50633_bl_probe, |
| .remove = __devexit_p(pcf50633_bl_remove), |
| .driver = { |
| .name = "pcf50633-backlight", |
| }, |
| }; |
| |
| module_platform_driver(pcf50633_bl_driver); |
| |
| MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); |
| MODULE_DESCRIPTION("PCF50633 backlight driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:pcf50633-backlight"); |