| /** |
| * Marvell BT-over-SDIO driver: SDIO interface related functions. |
| * |
| * Copyright (C) 2009, Marvell International Ltd. |
| * |
| * This software file (the "File") is distributed by Marvell International |
| * Ltd. under the terms of the GNU General Public License Version 2, June 1991 |
| * (the "License"). You may use, redistribute and/or modify this File in |
| * accordance with the terms and conditions of the License, a copy of which |
| * is available by writing to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the |
| * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. |
| * |
| * |
| * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE |
| * ARE EXPRESSLY DISCLAIMED. The License provides additional details about |
| * this warranty disclaimer. |
| **/ |
| |
| #include <linux/firmware.h> |
| #include <linux/slab.h> |
| |
| #include <linux/mmc/sdio_ids.h> |
| #include <linux/mmc/sdio_func.h> |
| #include <linux/module.h> |
| #include <linux/devcoredump.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| #include "btmrvl_drv.h" |
| #include "btmrvl_sdio.h" |
| |
| #define VERSION "1.0" |
| |
| static struct memory_type_mapping mem_type_mapping_tbl[] = { |
| {"ITCM", NULL, 0, 0xF0}, |
| {"DTCM", NULL, 0, 0xF1}, |
| {"SQRAM", NULL, 0, 0xF2}, |
| {"APU", NULL, 0, 0xF3}, |
| {"CIU", NULL, 0, 0xF4}, |
| {"ICU", NULL, 0, 0xF5}, |
| {"MAC", NULL, 0, 0xF6}, |
| {"EXT7", NULL, 0, 0xF7}, |
| {"EXT8", NULL, 0, 0xF8}, |
| {"EXT9", NULL, 0, 0xF9}, |
| {"EXT10", NULL, 0, 0xFA}, |
| {"EXT11", NULL, 0, 0xFB}, |
| {"EXT12", NULL, 0, 0xFC}, |
| {"EXT13", NULL, 0, 0xFD}, |
| {"EXTLAST", NULL, 0, 0xFE}, |
| }; |
| |
| static const struct of_device_id btmrvl_sdio_of_match_table[] = { |
| { .compatible = "marvell,sd8897-bt" }, |
| { .compatible = "marvell,sd8997-bt" }, |
| { } |
| }; |
| |
| static irqreturn_t btmrvl_wake_irq_bt(int irq, void *priv) |
| { |
| struct btmrvl_plt_wake_cfg *cfg = priv; |
| |
| if (cfg->irq_bt >= 0) { |
| pr_info("%s: wake by bt", __func__); |
| cfg->wake_by_bt = true; |
| disable_irq_nosync(irq); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* This function parses device tree node using mmc subnode devicetree API. |
| * The device node is saved in card->plt_of_node. |
| * If the device tree node exists and includes interrupts attributes, this |
| * function will request platform specific wakeup interrupt. |
| */ |
| static int btmrvl_sdio_probe_of(struct device *dev, |
| struct btmrvl_sdio_card *card) |
| { |
| struct btmrvl_plt_wake_cfg *cfg; |
| int ret; |
| |
| if (!dev->of_node || |
| !of_match_node(btmrvl_sdio_of_match_table, dev->of_node)) { |
| pr_err("sdio platform data not available"); |
| return -1; |
| } |
| |
| card->plt_of_node = dev->of_node; |
| |
| card->plt_wake_cfg = devm_kzalloc(dev, sizeof(*card->plt_wake_cfg), |
| GFP_KERNEL); |
| cfg = card->plt_wake_cfg; |
| if (cfg && card->plt_of_node) { |
| cfg->irq_bt = irq_of_parse_and_map(card->plt_of_node, 0); |
| if (!cfg->irq_bt) { |
| dev_err(dev, "fail to parse irq_bt from device tree"); |
| } else { |
| ret = devm_request_irq(dev, cfg->irq_bt, |
| btmrvl_wake_irq_bt, |
| IRQF_TRIGGER_LOW, |
| "bt_wake", cfg); |
| if (ret) { |
| dev_err(dev, |
| "Failed to request irq_bt %d (%d)\n", |
| cfg->irq_bt, ret); |
| } |
| disable_irq(cfg->irq_bt); |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* The btmrvl_sdio_remove() callback function is called |
| * when user removes this module from kernel space or ejects |
| * the card from the slot. The driver handles these 2 cases |
| * differently. |
| * If the user is removing the module, a MODULE_SHUTDOWN_REQ |
| * command is sent to firmware and interrupt will be disabled. |
| * If the card is removed, there is no need to send command |
| * or disable interrupt. |
| * |
| * The variable 'user_rmmod' is used to distinguish these two |
| * scenarios. This flag is initialized as FALSE in case the card |
| * is removed, and will be set to TRUE for module removal when |
| * module_exit function is called. |
| */ |
| static u8 user_rmmod; |
| static u8 sdio_ireg; |
| |
| static const struct btmrvl_sdio_card_reg btmrvl_reg_8688 = { |
| .cfg = 0x03, |
| .host_int_mask = 0x04, |
| .host_intstatus = 0x05, |
| .card_status = 0x20, |
| .sq_read_base_addr_a0 = 0x10, |
| .sq_read_base_addr_a1 = 0x11, |
| .card_fw_status0 = 0x40, |
| .card_fw_status1 = 0x41, |
| .card_rx_len = 0x42, |
| .card_rx_unit = 0x43, |
| .io_port_0 = 0x00, |
| .io_port_1 = 0x01, |
| .io_port_2 = 0x02, |
| .int_read_to_clear = false, |
| }; |
| static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = { |
| .cfg = 0x00, |
| .host_int_mask = 0x02, |
| .host_intstatus = 0x03, |
| .card_status = 0x30, |
| .sq_read_base_addr_a0 = 0x40, |
| .sq_read_base_addr_a1 = 0x41, |
| .card_revision = 0x5c, |
| .card_fw_status0 = 0x60, |
| .card_fw_status1 = 0x61, |
| .card_rx_len = 0x62, |
| .card_rx_unit = 0x63, |
| .io_port_0 = 0x78, |
| .io_port_1 = 0x79, |
| .io_port_2 = 0x7a, |
| .int_read_to_clear = false, |
| }; |
| |
| static const struct btmrvl_sdio_card_reg btmrvl_reg_8887 = { |
| .cfg = 0x00, |
| .host_int_mask = 0x08, |
| .host_intstatus = 0x0C, |
| .card_status = 0x5C, |
| .sq_read_base_addr_a0 = 0x6C, |
| .sq_read_base_addr_a1 = 0x6D, |
| .card_revision = 0xC8, |
| .card_fw_status0 = 0x88, |
| .card_fw_status1 = 0x89, |
| .card_rx_len = 0x8A, |
| .card_rx_unit = 0x8B, |
| .io_port_0 = 0xE4, |
| .io_port_1 = 0xE5, |
| .io_port_2 = 0xE6, |
| .int_read_to_clear = true, |
| .host_int_rsr = 0x04, |
| .card_misc_cfg = 0xD8, |
| }; |
| |
| static const struct btmrvl_sdio_card_reg btmrvl_reg_8897 = { |
| .cfg = 0x00, |
| .host_int_mask = 0x02, |
| .host_intstatus = 0x03, |
| .card_status = 0x50, |
| .sq_read_base_addr_a0 = 0x60, |
| .sq_read_base_addr_a1 = 0x61, |
| .card_revision = 0xbc, |
| .card_fw_status0 = 0xc0, |
| .card_fw_status1 = 0xc1, |
| .card_rx_len = 0xc2, |
| .card_rx_unit = 0xc3, |
| .io_port_0 = 0xd8, |
| .io_port_1 = 0xd9, |
| .io_port_2 = 0xda, |
| .int_read_to_clear = true, |
| .host_int_rsr = 0x01, |
| .card_misc_cfg = 0xcc, |
| .fw_dump_ctrl = 0xe2, |
| .fw_dump_start = 0xe3, |
| .fw_dump_end = 0xea, |
| }; |
| |
| static const struct btmrvl_sdio_card_reg btmrvl_reg_8997 = { |
| .cfg = 0x00, |
| .host_int_mask = 0x08, |
| .host_intstatus = 0x0c, |
| .card_status = 0x5c, |
| .sq_read_base_addr_a0 = 0xf8, |
| .sq_read_base_addr_a1 = 0xf9, |
| .card_revision = 0xc8, |
| .card_fw_status0 = 0xe8, |
| .card_fw_status1 = 0xe9, |
| .card_rx_len = 0xea, |
| .card_rx_unit = 0xeb, |
| .io_port_0 = 0xe4, |
| .io_port_1 = 0xe5, |
| .io_port_2 = 0xe6, |
| .int_read_to_clear = true, |
| .host_int_rsr = 0x04, |
| .card_misc_cfg = 0xD8, |
| .fw_dump_ctrl = 0xf0, |
| .fw_dump_start = 0xf1, |
| .fw_dump_end = 0xf8, |
| }; |
| |
| static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = { |
| .helper = "mrvl/sd8688_helper.bin", |
| .firmware = "mrvl/sd8688.bin", |
| .reg = &btmrvl_reg_8688, |
| .support_pscan_win_report = false, |
| .sd_blksz_fw_dl = 64, |
| .supports_fw_dump = false, |
| }; |
| |
| static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = { |
| .helper = NULL, |
| .firmware = "mrvl/sd8787_uapsta.bin", |
| .reg = &btmrvl_reg_87xx, |
| .support_pscan_win_report = false, |
| .sd_blksz_fw_dl = 256, |
| .supports_fw_dump = false, |
| }; |
| |
| static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = { |
| .helper = NULL, |
| .firmware = "mrvl/sd8797_uapsta.bin", |
| .reg = &btmrvl_reg_87xx, |
| .support_pscan_win_report = false, |
| .sd_blksz_fw_dl = 256, |
| .supports_fw_dump = false, |
| }; |
| |
| static const struct btmrvl_sdio_device btmrvl_sdio_sd8887 = { |
| .helper = NULL, |
| .firmware = "mrvl/sd8887_uapsta.bin", |
| .reg = &btmrvl_reg_8887, |
| .support_pscan_win_report = true, |
| .sd_blksz_fw_dl = 256, |
| .supports_fw_dump = false, |
| }; |
| |
| static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = { |
| .helper = NULL, |
| .firmware = "mrvl/sd8897_uapsta.bin", |
| .reg = &btmrvl_reg_8897, |
| .support_pscan_win_report = true, |
| .sd_blksz_fw_dl = 256, |
| .supports_fw_dump = true, |
| }; |
| |
| static const struct btmrvl_sdio_device btmrvl_sdio_sd8997 = { |
| .helper = NULL, |
| .firmware = "mrvl/sd8997_uapsta.bin", |
| .reg = &btmrvl_reg_8997, |
| .support_pscan_win_report = true, |
| .sd_blksz_fw_dl = 256, |
| .supports_fw_dump = true, |
| }; |
| |
| static const struct sdio_device_id btmrvl_sdio_ids[] = { |
| /* Marvell SD8688 Bluetooth device */ |
| { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105), |
| .driver_data = (unsigned long)&btmrvl_sdio_sd8688 }, |
| /* Marvell SD8787 Bluetooth device */ |
| { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A), |
| .driver_data = (unsigned long)&btmrvl_sdio_sd8787 }, |
| /* Marvell SD8787 Bluetooth AMP device */ |
| { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911B), |
| .driver_data = (unsigned long)&btmrvl_sdio_sd8787 }, |
| /* Marvell SD8797 Bluetooth device */ |
| { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A), |
| .driver_data = (unsigned long)&btmrvl_sdio_sd8797 }, |
| /* Marvell SD8887 Bluetooth device */ |
| { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9136), |
| .driver_data = (unsigned long)&btmrvl_sdio_sd8887 }, |
| /* Marvell SD8897 Bluetooth device */ |
| { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E), |
| .driver_data = (unsigned long)&btmrvl_sdio_sd8897 }, |
| /* Marvell SD8997 Bluetooth device */ |
| { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9142), |
| .driver_data = (unsigned long)&btmrvl_sdio_sd8997 }, |
| |
| { } /* Terminating entry */ |
| }; |
| |
| MODULE_DEVICE_TABLE(sdio, btmrvl_sdio_ids); |
| |
| static int btmrvl_sdio_get_rx_unit(struct btmrvl_sdio_card *card) |
| { |
| u8 reg; |
| int ret; |
| |
| reg = sdio_readb(card->func, card->reg->card_rx_unit, &ret); |
| if (!ret) |
| card->rx_unit = reg; |
| |
| return ret; |
| } |
| |
| static int btmrvl_sdio_read_fw_status(struct btmrvl_sdio_card *card, u16 *dat) |
| { |
| u8 fws0, fws1; |
| int ret; |
| |
| *dat = 0; |
| |
| fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret); |
| if (ret) |
| return -EIO; |
| |
| fws1 = sdio_readb(card->func, card->reg->card_fw_status1, &ret); |
| if (ret) |
| return -EIO; |
| |
| *dat = (((u16) fws1) << 8) | fws0; |
| |
| return 0; |
| } |
| |
| static int btmrvl_sdio_read_rx_len(struct btmrvl_sdio_card *card, u16 *dat) |
| { |
| u8 reg; |
| int ret; |
| |
| reg = sdio_readb(card->func, card->reg->card_rx_len, &ret); |
| if (!ret) |
| *dat = (u16) reg << card->rx_unit; |
| |
| return ret; |
| } |
| |
| static int btmrvl_sdio_enable_host_int_mask(struct btmrvl_sdio_card *card, |
| u8 mask) |
| { |
| int ret; |
| |
| sdio_writeb(card->func, mask, card->reg->host_int_mask, &ret); |
| if (ret) { |
| BT_ERR("Unable to enable the host interrupt!"); |
| ret = -EIO; |
| } |
| |
| return ret; |
| } |
| |
| static int btmrvl_sdio_disable_host_int_mask(struct btmrvl_sdio_card *card, |
| u8 mask) |
| { |
| u8 host_int_mask; |
| int ret; |
| |
| host_int_mask = sdio_readb(card->func, card->reg->host_int_mask, &ret); |
| if (ret) |
| return -EIO; |
| |
| host_int_mask &= ~mask; |
| |
| sdio_writeb(card->func, host_int_mask, card->reg->host_int_mask, &ret); |
| if (ret < 0) { |
| BT_ERR("Unable to disable the host interrupt!"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int btmrvl_sdio_poll_card_status(struct btmrvl_sdio_card *card, u8 bits) |
| { |
| unsigned int tries; |
| u8 status; |
| int ret; |
| |
| for (tries = 0; tries < MAX_POLL_TRIES * 1000; tries++) { |
| status = sdio_readb(card->func, card->reg->card_status, &ret); |
| if (ret) |
| goto failed; |
| if ((status & bits) == bits) |
| return ret; |
| |
| udelay(1); |
| } |
| |
| ret = -ETIMEDOUT; |
| |
| failed: |
| BT_ERR("FAILED! ret=%d", ret); |
| |
| return ret; |
| } |
| |
| static int btmrvl_sdio_verify_fw_download(struct btmrvl_sdio_card *card, |
| int pollnum) |
| { |
| u16 firmwarestat; |
| int tries, ret; |
| |
| /* Wait for firmware to become ready */ |
| for (tries = 0; tries < pollnum; tries++) { |
| sdio_claim_host(card->func); |
| ret = btmrvl_sdio_read_fw_status(card, &firmwarestat); |
| sdio_release_host(card->func); |
| if (ret < 0) |
| continue; |
| |
| if (firmwarestat == FIRMWARE_READY) |
| return 0; |
| |
| msleep(100); |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int btmrvl_sdio_download_helper(struct btmrvl_sdio_card *card) |
| { |
| const struct firmware *fw_helper = NULL; |
| const u8 *helper = NULL; |
| int ret; |
| void *tmphlprbuf = NULL; |
| int tmphlprbufsz, hlprblknow, helperlen; |
| u8 *helperbuf; |
| u32 tx_len; |
| |
| ret = request_firmware(&fw_helper, card->helper, |
| &card->func->dev); |
| if ((ret < 0) || !fw_helper) { |
| BT_ERR("request_firmware(helper) failed, error code = %d", |
| ret); |
| ret = -ENOENT; |
| goto done; |
| } |
| |
| helper = fw_helper->data; |
| helperlen = fw_helper->size; |
| |
| BT_DBG("Downloading helper image (%d bytes), block size %d bytes", |
| helperlen, SDIO_BLOCK_SIZE); |
| |
| tmphlprbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN); |
| |
| tmphlprbuf = kzalloc(tmphlprbufsz, GFP_KERNEL); |
| if (!tmphlprbuf) { |
| BT_ERR("Unable to allocate buffer for helper." |
| " Terminating download"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| helperbuf = (u8 *) ALIGN_ADDR(tmphlprbuf, BTSDIO_DMA_ALIGN); |
| |
| /* Perform helper data transfer */ |
| tx_len = (FIRMWARE_TRANSFER_NBLOCK * SDIO_BLOCK_SIZE) |
| - SDIO_HEADER_LEN; |
| hlprblknow = 0; |
| |
| do { |
| ret = btmrvl_sdio_poll_card_status(card, |
| CARD_IO_READY | DN_LD_CARD_RDY); |
| if (ret < 0) { |
| BT_ERR("Helper download poll status timeout @ %d", |
| hlprblknow); |
| goto done; |
| } |
| |
| /* Check if there is more data? */ |
| if (hlprblknow >= helperlen) |
| break; |
| |
| if (helperlen - hlprblknow < tx_len) |
| tx_len = helperlen - hlprblknow; |
| |
| /* Little-endian */ |
| helperbuf[0] = ((tx_len & 0x000000ff) >> 0); |
| helperbuf[1] = ((tx_len & 0x0000ff00) >> 8); |
| helperbuf[2] = ((tx_len & 0x00ff0000) >> 16); |
| helperbuf[3] = ((tx_len & 0xff000000) >> 24); |
| |
| memcpy(&helperbuf[SDIO_HEADER_LEN], &helper[hlprblknow], |
| tx_len); |
| |
| /* Now send the data */ |
| ret = sdio_writesb(card->func, card->ioport, helperbuf, |
| FIRMWARE_TRANSFER_NBLOCK * SDIO_BLOCK_SIZE); |
| if (ret < 0) { |
| BT_ERR("IO error during helper download @ %d", |
| hlprblknow); |
| goto done; |
| } |
| |
| hlprblknow += tx_len; |
| } while (true); |
| |
| BT_DBG("Transferring helper image EOF block"); |
| |
| memset(helperbuf, 0x0, SDIO_BLOCK_SIZE); |
| |
| ret = sdio_writesb(card->func, card->ioport, helperbuf, |
| SDIO_BLOCK_SIZE); |
| if (ret < 0) { |
| BT_ERR("IO error in writing helper image EOF block"); |
| goto done; |
| } |
| |
| ret = 0; |
| |
| done: |
| kfree(tmphlprbuf); |
| release_firmware(fw_helper); |
| return ret; |
| } |
| |
| static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card) |
| { |
| const struct firmware *fw_firmware = NULL; |
| const u8 *firmware = NULL; |
| int firmwarelen, tmpfwbufsz, ret; |
| unsigned int tries, offset; |
| u8 base0, base1; |
| void *tmpfwbuf = NULL; |
| u8 *fwbuf; |
| u16 len, blksz_dl = card->sd_blksz_fw_dl; |
| int txlen = 0, tx_blocks = 0, count = 0; |
| |
| ret = request_firmware(&fw_firmware, card->firmware, |
| &card->func->dev); |
| if ((ret < 0) || !fw_firmware) { |
| BT_ERR("request_firmware(firmware) failed, error code = %d", |
| ret); |
| ret = -ENOENT; |
| goto done; |
| } |
| |
| firmware = fw_firmware->data; |
| firmwarelen = fw_firmware->size; |
| |
| BT_DBG("Downloading FW image (%d bytes)", firmwarelen); |
| |
| tmpfwbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN); |
| tmpfwbuf = kzalloc(tmpfwbufsz, GFP_KERNEL); |
| if (!tmpfwbuf) { |
| BT_ERR("Unable to allocate buffer for firmware." |
| " Terminating download"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| /* Ensure aligned firmware buffer */ |
| fwbuf = (u8 *) ALIGN_ADDR(tmpfwbuf, BTSDIO_DMA_ALIGN); |
| |
| /* Perform firmware data transfer */ |
| offset = 0; |
| do { |
| ret = btmrvl_sdio_poll_card_status(card, |
| CARD_IO_READY | DN_LD_CARD_RDY); |
| if (ret < 0) { |
| BT_ERR("FW download with helper poll status" |
| " timeout @ %d", offset); |
| goto done; |
| } |
| |
| /* Check if there is more data ? */ |
| if (offset >= firmwarelen) |
| break; |
| |
| for (tries = 0; tries < MAX_POLL_TRIES; tries++) { |
| base0 = sdio_readb(card->func, |
| card->reg->sq_read_base_addr_a0, &ret); |
| if (ret) { |
| BT_ERR("BASE0 register read failed:" |
| " base0 = 0x%04X(%d)." |
| " Terminating download", |
| base0, base0); |
| ret = -EIO; |
| goto done; |
| } |
| base1 = sdio_readb(card->func, |
| card->reg->sq_read_base_addr_a1, &ret); |
| if (ret) { |
| BT_ERR("BASE1 register read failed:" |
| " base1 = 0x%04X(%d)." |
| " Terminating download", |
| base1, base1); |
| ret = -EIO; |
| goto done; |
| } |
| |
| len = (((u16) base1) << 8) | base0; |
| if (len) |
| break; |
| |
| udelay(10); |
| } |
| |
| if (!len) |
| break; |
| else if (len > BTM_UPLD_SIZE) { |
| BT_ERR("FW download failure @%d, invalid length %d", |
| offset, len); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| txlen = len; |
| |
| if (len & BIT(0)) { |
| count++; |
| if (count > MAX_WRITE_IOMEM_RETRY) { |
| BT_ERR("FW download failure @%d, " |
| "over max retry count", offset); |
| ret = -EIO; |
| goto done; |
| } |
| BT_ERR("FW CRC error indicated by the helper: " |
| "len = 0x%04X, txlen = %d", len, txlen); |
| len &= ~BIT(0); |
| /* Set txlen to 0 so as to resend from same offset */ |
| txlen = 0; |
| } else { |
| count = 0; |
| |
| /* Last block ? */ |
| if (firmwarelen - offset < txlen) |
| txlen = firmwarelen - offset; |
| |
| tx_blocks = DIV_ROUND_UP(txlen, blksz_dl); |
| |
| memcpy(fwbuf, &firmware[offset], txlen); |
| } |
| |
| ret = sdio_writesb(card->func, card->ioport, fwbuf, |
| tx_blocks * blksz_dl); |
| |
| if (ret < 0) { |
| BT_ERR("FW download, writesb(%d) failed @%d", |
| count, offset); |
| sdio_writeb(card->func, HOST_CMD53_FIN, |
| card->reg->cfg, &ret); |
| if (ret) |
| BT_ERR("writeb failed (CFG)"); |
| } |
| |
| offset += txlen; |
| } while (true); |
| |
| BT_INFO("FW download over, size %d bytes", offset); |
| |
| ret = 0; |
| |
| done: |
| kfree(tmpfwbuf); |
| release_firmware(fw_firmware); |
| return ret; |
| } |
| |
| static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv) |
| { |
| u16 buf_len = 0; |
| int ret, num_blocks, blksz; |
| struct sk_buff *skb = NULL; |
| u32 type; |
| u8 *payload = NULL; |
| struct hci_dev *hdev = priv->btmrvl_dev.hcidev; |
| struct btmrvl_sdio_card *card = priv->btmrvl_dev.card; |
| |
| if (!card || !card->func) { |
| BT_ERR("card or function is NULL!"); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| /* Read the length of data to be transferred */ |
| ret = btmrvl_sdio_read_rx_len(card, &buf_len); |
| if (ret < 0) { |
| BT_ERR("read rx_len failed"); |
| ret = -EIO; |
| goto exit; |
| } |
| |
| blksz = SDIO_BLOCK_SIZE; |
| num_blocks = DIV_ROUND_UP(buf_len, blksz); |
| |
| if (buf_len <= SDIO_HEADER_LEN |
| || (num_blocks * blksz) > ALLOC_BUF_SIZE) { |
| BT_ERR("invalid packet length: %d", buf_len); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| /* Allocate buffer */ |
| skb = bt_skb_alloc(num_blocks * blksz + BTSDIO_DMA_ALIGN, GFP_ATOMIC); |
| if (!skb) { |
| BT_ERR("No free skb"); |
| ret = -ENOMEM; |
| goto exit; |
| } |
| |
| if ((unsigned long) skb->data & (BTSDIO_DMA_ALIGN - 1)) { |
| skb_put(skb, (unsigned long) skb->data & |
| (BTSDIO_DMA_ALIGN - 1)); |
| skb_pull(skb, (unsigned long) skb->data & |
| (BTSDIO_DMA_ALIGN - 1)); |
| } |
| |
| payload = skb->data; |
| |
| ret = sdio_readsb(card->func, payload, card->ioport, |
| num_blocks * blksz); |
| if (ret < 0) { |
| BT_ERR("readsb failed: %d", ret); |
| ret = -EIO; |
| goto exit; |
| } |
| |
| /* This is SDIO specific header length: byte[2][1][0], type: byte[3] |
| * (HCI_COMMAND = 1, ACL_DATA = 2, SCO_DATA = 3, 0xFE = Vendor) |
| */ |
| |
| buf_len = payload[0]; |
| buf_len |= payload[1] << 8; |
| buf_len |= payload[2] << 16; |
| |
| if (buf_len > blksz * num_blocks) { |
| BT_ERR("Skip incorrect packet: hdrlen %d buffer %d", |
| buf_len, blksz * num_blocks); |
| ret = -EIO; |
| goto exit; |
| } |
| |
| type = payload[3]; |
| |
| switch (type) { |
| case HCI_ACLDATA_PKT: |
| case HCI_SCODATA_PKT: |
| case HCI_EVENT_PKT: |
| hci_skb_pkt_type(skb) = type; |
| skb_put(skb, buf_len); |
| skb_pull(skb, SDIO_HEADER_LEN); |
| |
| if (type == HCI_EVENT_PKT) { |
| if (btmrvl_check_evtpkt(priv, skb)) |
| hci_recv_frame(hdev, skb); |
| } else { |
| hci_recv_frame(hdev, skb); |
| } |
| |
| hdev->stat.byte_rx += buf_len; |
| break; |
| |
| case MRVL_VENDOR_PKT: |
| hci_skb_pkt_type(skb) = HCI_VENDOR_PKT; |
| skb_put(skb, buf_len); |
| skb_pull(skb, SDIO_HEADER_LEN); |
| |
| if (btmrvl_process_event(priv, skb)) |
| hci_recv_frame(hdev, skb); |
| |
| hdev->stat.byte_rx += buf_len; |
| break; |
| |
| default: |
| BT_ERR("Unknown packet type:%d", type); |
| BT_ERR("hex: %*ph", blksz * num_blocks, payload); |
| |
| kfree_skb(skb); |
| skb = NULL; |
| break; |
| } |
| |
| exit: |
| if (ret) { |
| hdev->stat.err_rx++; |
| kfree_skb(skb); |
| } |
| |
| return ret; |
| } |
| |
| static int btmrvl_sdio_process_int_status(struct btmrvl_private *priv) |
| { |
| ulong flags; |
| u8 ireg; |
| struct btmrvl_sdio_card *card = priv->btmrvl_dev.card; |
| |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| ireg = sdio_ireg; |
| sdio_ireg = 0; |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| |
| sdio_claim_host(card->func); |
| if (ireg & DN_LD_HOST_INT_STATUS) { |
| if (priv->btmrvl_dev.tx_dnld_rdy) |
| BT_DBG("tx_done already received: " |
| " int_status=0x%x", ireg); |
| else |
| priv->btmrvl_dev.tx_dnld_rdy = true; |
| } |
| |
| if (ireg & UP_LD_HOST_INT_STATUS) |
| btmrvl_sdio_card_to_host(priv); |
| |
| sdio_release_host(card->func); |
| |
| return 0; |
| } |
| |
| static int btmrvl_sdio_read_to_clear(struct btmrvl_sdio_card *card, u8 *ireg) |
| { |
| struct btmrvl_adapter *adapter = card->priv->adapter; |
| int ret; |
| |
| ret = sdio_readsb(card->func, adapter->hw_regs, 0, SDIO_BLOCK_SIZE); |
| if (ret) { |
| BT_ERR("sdio_readsb: read int hw_regs failed: %d", ret); |
| return ret; |
| } |
| |
| *ireg = adapter->hw_regs[card->reg->host_intstatus]; |
| BT_DBG("hw_regs[%#x]=%#x", card->reg->host_intstatus, *ireg); |
| |
| return 0; |
| } |
| |
| static int btmrvl_sdio_write_to_clear(struct btmrvl_sdio_card *card, u8 *ireg) |
| { |
| int ret; |
| |
| *ireg = sdio_readb(card->func, card->reg->host_intstatus, &ret); |
| if (ret) { |
| BT_ERR("sdio_readb: read int status failed: %d", ret); |
| return ret; |
| } |
| |
| if (*ireg) { |
| /* |
| * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS |
| * Clear the interrupt status register and re-enable the |
| * interrupt. |
| */ |
| BT_DBG("int_status = 0x%x", *ireg); |
| |
| sdio_writeb(card->func, ~(*ireg) & (DN_LD_HOST_INT_STATUS | |
| UP_LD_HOST_INT_STATUS), |
| card->reg->host_intstatus, &ret); |
| if (ret) { |
| BT_ERR("sdio_writeb: clear int status failed: %d", ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void btmrvl_sdio_interrupt(struct sdio_func *func) |
| { |
| struct btmrvl_private *priv; |
| struct btmrvl_sdio_card *card; |
| ulong flags; |
| u8 ireg = 0; |
| int ret; |
| |
| card = sdio_get_drvdata(func); |
| if (!card || !card->priv) { |
| BT_ERR("sbi_interrupt(%p) card or priv is NULL, card=%p", |
| func, card); |
| return; |
| } |
| |
| priv = card->priv; |
| |
| if (priv->surprise_removed) |
| return; |
| |
| if (card->reg->int_read_to_clear) |
| ret = btmrvl_sdio_read_to_clear(card, &ireg); |
| else |
| ret = btmrvl_sdio_write_to_clear(card, &ireg); |
| |
| if (ret) |
| return; |
| |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| sdio_ireg |= ireg; |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| |
| btmrvl_interrupt(priv); |
| } |
| |
| static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card) |
| { |
| struct sdio_func *func; |
| u8 reg; |
| int ret = 0; |
| |
| if (!card || !card->func) { |
| BT_ERR("Error: card or function is NULL!"); |
| ret = -EINVAL; |
| goto failed; |
| } |
| |
| func = card->func; |
| |
| sdio_claim_host(func); |
| |
| ret = sdio_enable_func(func); |
| if (ret) { |
| BT_ERR("sdio_enable_func() failed: ret=%d", ret); |
| ret = -EIO; |
| goto release_host; |
| } |
| |
| ret = sdio_claim_irq(func, btmrvl_sdio_interrupt); |
| if (ret) { |
| BT_ERR("sdio_claim_irq failed: ret=%d", ret); |
| ret = -EIO; |
| goto disable_func; |
| } |
| |
| ret = sdio_set_block_size(card->func, SDIO_BLOCK_SIZE); |
| if (ret) { |
| BT_ERR("cannot set SDIO block size"); |
| ret = -EIO; |
| goto release_irq; |
| } |
| |
| reg = sdio_readb(func, card->reg->io_port_0, &ret); |
| if (ret < 0) { |
| ret = -EIO; |
| goto release_irq; |
| } |
| |
| card->ioport = reg; |
| |
| reg = sdio_readb(func, card->reg->io_port_1, &ret); |
| if (ret < 0) { |
| ret = -EIO; |
| goto release_irq; |
| } |
| |
| card->ioport |= (reg << 8); |
| |
| reg = sdio_readb(func, card->reg->io_port_2, &ret); |
| if (ret < 0) { |
| ret = -EIO; |
| goto release_irq; |
| } |
| |
| card->ioport |= (reg << 16); |
| |
| BT_DBG("SDIO FUNC%d IO port: 0x%x", func->num, card->ioport); |
| |
| if (card->reg->int_read_to_clear) { |
| reg = sdio_readb(func, card->reg->host_int_rsr, &ret); |
| if (ret < 0) { |
| ret = -EIO; |
| goto release_irq; |
| } |
| sdio_writeb(func, reg | 0x3f, card->reg->host_int_rsr, &ret); |
| if (ret < 0) { |
| ret = -EIO; |
| goto release_irq; |
| } |
| |
| reg = sdio_readb(func, card->reg->card_misc_cfg, &ret); |
| if (ret < 0) { |
| ret = -EIO; |
| goto release_irq; |
| } |
| sdio_writeb(func, reg | 0x10, card->reg->card_misc_cfg, &ret); |
| if (ret < 0) { |
| ret = -EIO; |
| goto release_irq; |
| } |
| } |
| |
| sdio_set_drvdata(func, card); |
| |
| sdio_release_host(func); |
| |
| return 0; |
| |
| release_irq: |
| sdio_release_irq(func); |
| |
| disable_func: |
| sdio_disable_func(func); |
| |
| release_host: |
| sdio_release_host(func); |
| |
| failed: |
| return ret; |
| } |
| |
| static int btmrvl_sdio_unregister_dev(struct btmrvl_sdio_card *card) |
| { |
| if (card && card->func) { |
| sdio_claim_host(card->func); |
| sdio_release_irq(card->func); |
| sdio_disable_func(card->func); |
| sdio_release_host(card->func); |
| sdio_set_drvdata(card->func, NULL); |
| } |
| |
| return 0; |
| } |
| |
| static int btmrvl_sdio_enable_host_int(struct btmrvl_sdio_card *card) |
| { |
| int ret; |
| |
| if (!card || !card->func) |
| return -EINVAL; |
| |
| sdio_claim_host(card->func); |
| |
| ret = btmrvl_sdio_enable_host_int_mask(card, HIM_ENABLE); |
| |
| btmrvl_sdio_get_rx_unit(card); |
| |
| sdio_release_host(card->func); |
| |
| return ret; |
| } |
| |
| static int btmrvl_sdio_disable_host_int(struct btmrvl_sdio_card *card) |
| { |
| int ret; |
| |
| if (!card || !card->func) |
| return -EINVAL; |
| |
| sdio_claim_host(card->func); |
| |
| ret = btmrvl_sdio_disable_host_int_mask(card, HIM_DISABLE); |
| |
| sdio_release_host(card->func); |
| |
| return ret; |
| } |
| |
| static int btmrvl_sdio_host_to_card(struct btmrvl_private *priv, |
| u8 *payload, u16 nb) |
| { |
| struct btmrvl_sdio_card *card = priv->btmrvl_dev.card; |
| int ret = 0; |
| int blksz; |
| int i = 0; |
| u8 *buf = NULL; |
| void *tmpbuf = NULL; |
| int tmpbufsz; |
| |
| if (!card || !card->func) { |
| BT_ERR("card or function is NULL!"); |
| return -EINVAL; |
| } |
| |
| blksz = DIV_ROUND_UP(nb, SDIO_BLOCK_SIZE) * SDIO_BLOCK_SIZE; |
| |
| buf = payload; |
| if ((unsigned long) payload & (BTSDIO_DMA_ALIGN - 1) || |
| nb < blksz) { |
| tmpbufsz = ALIGN_SZ(blksz, BTSDIO_DMA_ALIGN) + |
| BTSDIO_DMA_ALIGN; |
| tmpbuf = kzalloc(tmpbufsz, GFP_KERNEL); |
| if (!tmpbuf) |
| return -ENOMEM; |
| buf = (u8 *) ALIGN_ADDR(tmpbuf, BTSDIO_DMA_ALIGN); |
| memcpy(buf, payload, nb); |
| } |
| |
| sdio_claim_host(card->func); |
| |
| do { |
| /* Transfer data to card */ |
| ret = sdio_writesb(card->func, card->ioport, buf, |
| blksz); |
| if (ret < 0) { |
| i++; |
| BT_ERR("i=%d writesb failed: %d", i, ret); |
| BT_ERR("hex: %*ph", nb, payload); |
| ret = -EIO; |
| if (i > MAX_WRITE_IOMEM_RETRY) |
| goto exit; |
| } |
| } while (ret); |
| |
| priv->btmrvl_dev.tx_dnld_rdy = false; |
| |
| exit: |
| sdio_release_host(card->func); |
| kfree(tmpbuf); |
| |
| return ret; |
| } |
| |
| static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card) |
| { |
| int ret; |
| u8 fws0; |
| int pollnum = MAX_POLL_TRIES; |
| |
| if (!card || !card->func) { |
| BT_ERR("card or function is NULL!"); |
| return -EINVAL; |
| } |
| |
| if (!btmrvl_sdio_verify_fw_download(card, 1)) { |
| BT_DBG("Firmware already downloaded!"); |
| return 0; |
| } |
| |
| sdio_claim_host(card->func); |
| |
| /* Check if other function driver is downloading the firmware */ |
| fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret); |
| if (ret) { |
| BT_ERR("Failed to read FW downloading status!"); |
| ret = -EIO; |
| goto done; |
| } |
| if (fws0) { |
| BT_DBG("BT not the winner (%#x). Skip FW downloading", fws0); |
| |
| /* Give other function more time to download the firmware */ |
| pollnum *= 10; |
| } else { |
| if (card->helper) { |
| ret = btmrvl_sdio_download_helper(card); |
| if (ret) { |
| BT_ERR("Failed to download helper!"); |
| ret = -EIO; |
| goto done; |
| } |
| } |
| |
| if (btmrvl_sdio_download_fw_w_helper(card)) { |
| BT_ERR("Failed to download firmware!"); |
| ret = -EIO; |
| goto done; |
| } |
| } |
| |
| /* |
| * winner or not, with this test the FW synchronizes when the |
| * module can continue its initialization |
| */ |
| if (btmrvl_sdio_verify_fw_download(card, pollnum)) { |
| BT_ERR("FW failed to be active in time!"); |
| ret = -ETIMEDOUT; |
| goto done; |
| } |
| |
| sdio_release_host(card->func); |
| |
| return 0; |
| |
| done: |
| sdio_release_host(card->func); |
| return ret; |
| } |
| |
| static int btmrvl_sdio_wakeup_fw(struct btmrvl_private *priv) |
| { |
| struct btmrvl_sdio_card *card = priv->btmrvl_dev.card; |
| int ret = 0; |
| |
| if (!card || !card->func) { |
| BT_ERR("card or function is NULL!"); |
| return -EINVAL; |
| } |
| |
| sdio_claim_host(card->func); |
| |
| sdio_writeb(card->func, HOST_POWER_UP, card->reg->cfg, &ret); |
| |
| sdio_release_host(card->func); |
| |
| BT_DBG("wake up firmware"); |
| |
| return ret; |
| } |
| |
| static void btmrvl_sdio_dump_regs(struct btmrvl_private *priv) |
| { |
| struct btmrvl_sdio_card *card = priv->btmrvl_dev.card; |
| int ret = 0; |
| unsigned int reg, reg_start, reg_end; |
| char buf[256], *ptr; |
| u8 loop, func, data; |
| int MAX_LOOP = 2; |
| |
| btmrvl_sdio_wakeup_fw(priv); |
| sdio_claim_host(card->func); |
| |
| for (loop = 0; loop < MAX_LOOP; loop++) { |
| memset(buf, 0, sizeof(buf)); |
| ptr = buf; |
| |
| if (loop == 0) { |
| /* Read the registers of SDIO function0 */ |
| func = loop; |
| reg_start = 0; |
| reg_end = 9; |
| } else { |
| func = 2; |
| reg_start = 0; |
| reg_end = 0x09; |
| } |
| |
| ptr += sprintf(ptr, "SDIO Func%d (%#x-%#x): ", |
| func, reg_start, reg_end); |
| for (reg = reg_start; reg <= reg_end; reg++) { |
| if (func == 0) |
| data = sdio_f0_readb(card->func, reg, &ret); |
| else |
| data = sdio_readb(card->func, reg, &ret); |
| |
| if (!ret) { |
| ptr += sprintf(ptr, "%02x ", data); |
| } else { |
| ptr += sprintf(ptr, "ERR"); |
| break; |
| } |
| } |
| |
| BT_INFO("%s", buf); |
| } |
| |
| sdio_release_host(card->func); |
| } |
| |
| /* This function read/write firmware */ |
| static enum |
| rdwr_status btmrvl_sdio_rdwr_firmware(struct btmrvl_private *priv, |
| u8 doneflag) |
| { |
| struct btmrvl_sdio_card *card = priv->btmrvl_dev.card; |
| int ret, tries; |
| u8 ctrl_data = 0; |
| |
| sdio_writeb(card->func, FW_DUMP_HOST_READY, card->reg->fw_dump_ctrl, |
| &ret); |
| |
| if (ret) { |
| BT_ERR("SDIO write err"); |
| return RDWR_STATUS_FAILURE; |
| } |
| |
| for (tries = 0; tries < MAX_POLL_TRIES; tries++) { |
| ctrl_data = sdio_readb(card->func, card->reg->fw_dump_ctrl, |
| &ret); |
| |
| if (ret) { |
| BT_ERR("SDIO read err"); |
| return RDWR_STATUS_FAILURE; |
| } |
| |
| if (ctrl_data == FW_DUMP_DONE) |
| break; |
| if (doneflag && ctrl_data == doneflag) |
| return RDWR_STATUS_DONE; |
| if (ctrl_data != FW_DUMP_HOST_READY) { |
| BT_INFO("The ctrl reg was changed, re-try again!"); |
| sdio_writeb(card->func, FW_DUMP_HOST_READY, |
| card->reg->fw_dump_ctrl, &ret); |
| if (ret) { |
| BT_ERR("SDIO write err"); |
| return RDWR_STATUS_FAILURE; |
| } |
| } |
| usleep_range(100, 200); |
| } |
| |
| if (ctrl_data == FW_DUMP_HOST_READY) { |
| BT_ERR("Fail to pull ctrl_data"); |
| return RDWR_STATUS_FAILURE; |
| } |
| |
| return RDWR_STATUS_SUCCESS; |
| } |
| |
| /* This function dump sdio register and memory data */ |
| static void btmrvl_sdio_dump_firmware(struct btmrvl_private *priv) |
| { |
| struct btmrvl_sdio_card *card = priv->btmrvl_dev.card; |
| int ret = 0; |
| unsigned int reg, reg_start, reg_end; |
| enum rdwr_status stat; |
| u8 *dbg_ptr, *end_ptr, *fw_dump_data, *fw_dump_ptr; |
| u8 dump_num = 0, idx, i, read_reg, doneflag = 0; |
| u32 memory_size, fw_dump_len = 0; |
| |
| /* dump sdio register first */ |
| btmrvl_sdio_dump_regs(priv); |
| |
| if (!card->supports_fw_dump) { |
| BT_ERR("Firmware dump not supported for this card!"); |
| return; |
| } |
| |
| for (idx = 0; idx < ARRAY_SIZE(mem_type_mapping_tbl); idx++) { |
| struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx]; |
| |
| if (entry->mem_ptr) { |
| vfree(entry->mem_ptr); |
| entry->mem_ptr = NULL; |
| } |
| entry->mem_size = 0; |
| } |
| |
| btmrvl_sdio_wakeup_fw(priv); |
| sdio_claim_host(card->func); |
| |
| BT_INFO("== btmrvl firmware dump start =="); |
| |
| stat = btmrvl_sdio_rdwr_firmware(priv, doneflag); |
| if (stat == RDWR_STATUS_FAILURE) |
| goto done; |
| |
| reg = card->reg->fw_dump_start; |
| /* Read the number of the memories which will dump */ |
| dump_num = sdio_readb(card->func, reg, &ret); |
| |
| if (ret) { |
| BT_ERR("SDIO read memory length err"); |
| goto done; |
| } |
| |
| /* Read the length of every memory which will dump */ |
| for (idx = 0; idx < dump_num; idx++) { |
| struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx]; |
| |
| stat = btmrvl_sdio_rdwr_firmware(priv, doneflag); |
| if (stat == RDWR_STATUS_FAILURE) |
| goto done; |
| |
| memory_size = 0; |
| reg = card->reg->fw_dump_start; |
| for (i = 0; i < 4; i++) { |
| read_reg = sdio_readb(card->func, reg, &ret); |
| if (ret) { |
| BT_ERR("SDIO read err"); |
| goto done; |
| } |
| memory_size |= (read_reg << i*8); |
| reg++; |
| } |
| |
| if (memory_size == 0) { |
| BT_INFO("Firmware dump finished!"); |
| sdio_writeb(card->func, FW_DUMP_READ_DONE, |
| card->reg->fw_dump_ctrl, &ret); |
| if (ret) { |
| BT_ERR("SDIO Write MEMDUMP_FINISH ERR"); |
| goto done; |
| } |
| break; |
| } |
| |
| BT_INFO("%s_SIZE=0x%x", entry->mem_name, memory_size); |
| entry->mem_ptr = vzalloc(memory_size + 1); |
| entry->mem_size = memory_size; |
| if (!entry->mem_ptr) { |
| BT_ERR("Vzalloc %s failed", entry->mem_name); |
| goto done; |
| } |
| |
| fw_dump_len += (strlen("========Start dump ") + |
| strlen(entry->mem_name) + |
| strlen("========\n") + |
| (memory_size + 1) + |
| strlen("\n========End dump========\n")); |
| |
| dbg_ptr = entry->mem_ptr; |
| end_ptr = dbg_ptr + memory_size; |
| |
| doneflag = entry->done_flag; |
| BT_INFO("Start %s output, please wait...", |
| entry->mem_name); |
| |
| do { |
| stat = btmrvl_sdio_rdwr_firmware(priv, doneflag); |
| if (stat == RDWR_STATUS_FAILURE) |
| goto done; |
| |
| reg_start = card->reg->fw_dump_start; |
| reg_end = card->reg->fw_dump_end; |
| for (reg = reg_start; reg <= reg_end; reg++) { |
| *dbg_ptr = sdio_readb(card->func, reg, &ret); |
| if (ret) { |
| BT_ERR("SDIO read err"); |
| goto done; |
| } |
| if (dbg_ptr < end_ptr) |
| dbg_ptr++; |
| else |
| BT_ERR("Allocated buffer not enough"); |
| } |
| |
| if (stat != RDWR_STATUS_DONE) { |
| continue; |
| } else { |
| BT_INFO("%s done: size=0x%tx", |
| entry->mem_name, |
| dbg_ptr - entry->mem_ptr); |
| break; |
| } |
| } while (1); |
| } |
| |
| BT_INFO("== btmrvl firmware dump end =="); |
| |
| done: |
| sdio_release_host(card->func); |
| |
| if (fw_dump_len == 0) |
| return; |
| |
| fw_dump_data = vzalloc(fw_dump_len+1); |
| if (!fw_dump_data) { |
| BT_ERR("Vzalloc fw_dump_data fail!"); |
| return; |
| } |
| fw_dump_ptr = fw_dump_data; |
| |
| /* Dump all the memory data into single file, a userspace script will |
| be used to split all the memory data to multiple files*/ |
| BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump start"); |
| for (idx = 0; idx < dump_num; idx++) { |
| struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx]; |
| |
| if (entry->mem_ptr) { |
| strcpy(fw_dump_ptr, "========Start dump "); |
| fw_dump_ptr += strlen("========Start dump "); |
| |
| strcpy(fw_dump_ptr, entry->mem_name); |
| fw_dump_ptr += strlen(entry->mem_name); |
| |
| strcpy(fw_dump_ptr, "========\n"); |
| fw_dump_ptr += strlen("========\n"); |
| |
| memcpy(fw_dump_ptr, entry->mem_ptr, entry->mem_size); |
| fw_dump_ptr += entry->mem_size; |
| |
| strcpy(fw_dump_ptr, "\n========End dump========\n"); |
| fw_dump_ptr += strlen("\n========End dump========\n"); |
| |
| vfree(mem_type_mapping_tbl[idx].mem_ptr); |
| mem_type_mapping_tbl[idx].mem_ptr = NULL; |
| } |
| } |
| |
| /* fw_dump_data will be free in device coredump release function |
| after 5 min*/ |
| dev_coredumpv(&card->func->dev, fw_dump_data, fw_dump_len, GFP_KERNEL); |
| BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump end"); |
| } |
| |
| static int btmrvl_sdio_probe(struct sdio_func *func, |
| const struct sdio_device_id *id) |
| { |
| int ret = 0; |
| struct btmrvl_private *priv = NULL; |
| struct btmrvl_sdio_card *card = NULL; |
| |
| BT_INFO("vendor=0x%x, device=0x%x, class=%d, fn=%d", |
| id->vendor, id->device, id->class, func->num); |
| |
| card = devm_kzalloc(&func->dev, sizeof(*card), GFP_KERNEL); |
| if (!card) |
| return -ENOMEM; |
| |
| card->func = func; |
| |
| if (id->driver_data) { |
| struct btmrvl_sdio_device *data = (void *) id->driver_data; |
| card->helper = data->helper; |
| card->firmware = data->firmware; |
| card->reg = data->reg; |
| card->sd_blksz_fw_dl = data->sd_blksz_fw_dl; |
| card->support_pscan_win_report = data->support_pscan_win_report; |
| card->supports_fw_dump = data->supports_fw_dump; |
| } |
| |
| if (btmrvl_sdio_register_dev(card) < 0) { |
| BT_ERR("Failed to register BT device!"); |
| return -ENODEV; |
| } |
| |
| /* Disable the interrupts on the card */ |
| btmrvl_sdio_disable_host_int(card); |
| |
| if (btmrvl_sdio_download_fw(card)) { |
| BT_ERR("Downloading firmware failed!"); |
| ret = -ENODEV; |
| goto unreg_dev; |
| } |
| |
| btmrvl_sdio_enable_host_int(card); |
| |
| /* Device tree node parsing and platform specific configuration*/ |
| btmrvl_sdio_probe_of(&func->dev, card); |
| |
| priv = btmrvl_add_card(card); |
| if (!priv) { |
| BT_ERR("Initializing card failed!"); |
| ret = -ENODEV; |
| goto disable_host_int; |
| } |
| |
| card->priv = priv; |
| |
| /* Initialize the interface specific function pointers */ |
| priv->hw_host_to_card = btmrvl_sdio_host_to_card; |
| priv->hw_wakeup_firmware = btmrvl_sdio_wakeup_fw; |
| priv->hw_process_int_status = btmrvl_sdio_process_int_status; |
| priv->firmware_dump = btmrvl_sdio_dump_firmware; |
| |
| if (btmrvl_register_hdev(priv)) { |
| BT_ERR("Register hdev failed!"); |
| ret = -ENODEV; |
| goto disable_host_int; |
| } |
| |
| return 0; |
| |
| disable_host_int: |
| btmrvl_sdio_disable_host_int(card); |
| unreg_dev: |
| btmrvl_sdio_unregister_dev(card); |
| return ret; |
| } |
| |
| static void btmrvl_sdio_remove(struct sdio_func *func) |
| { |
| struct btmrvl_sdio_card *card; |
| |
| if (func) { |
| card = sdio_get_drvdata(func); |
| if (card) { |
| /* Send SHUTDOWN command & disable interrupt |
| * if user removes the module. |
| */ |
| if (user_rmmod) { |
| btmrvl_send_module_cfg_cmd(card->priv, |
| MODULE_SHUTDOWN_REQ); |
| btmrvl_sdio_disable_host_int(card); |
| } |
| BT_DBG("unregester dev"); |
| card->priv->surprise_removed = true; |
| btmrvl_sdio_unregister_dev(card); |
| btmrvl_remove_card(card->priv); |
| } |
| } |
| } |
| |
| static int btmrvl_sdio_suspend(struct device *dev) |
| { |
| struct sdio_func *func = dev_to_sdio_func(dev); |
| struct btmrvl_sdio_card *card; |
| struct btmrvl_private *priv; |
| mmc_pm_flag_t pm_flags; |
| struct hci_dev *hcidev; |
| |
| if (func) { |
| pm_flags = sdio_get_host_pm_caps(func); |
| BT_DBG("%s: suspend: PM flags = 0x%x", sdio_func_id(func), |
| pm_flags); |
| if (!(pm_flags & MMC_PM_KEEP_POWER)) { |
| BT_ERR("%s: cannot remain alive while suspended", |
| sdio_func_id(func)); |
| return -ENOSYS; |
| } |
| card = sdio_get_drvdata(func); |
| if (!card || !card->priv) { |
| BT_ERR("card or priv structure is not valid"); |
| return 0; |
| } |
| } else { |
| BT_ERR("sdio_func is not specified"); |
| return 0; |
| } |
| |
| /* Enable platform specific wakeup interrupt */ |
| if (card->plt_wake_cfg && card->plt_wake_cfg->irq_bt >= 0) { |
| card->plt_wake_cfg->wake_by_bt = false; |
| enable_irq(card->plt_wake_cfg->irq_bt); |
| enable_irq_wake(card->plt_wake_cfg->irq_bt); |
| } |
| |
| priv = card->priv; |
| priv->adapter->is_suspending = true; |
| hcidev = priv->btmrvl_dev.hcidev; |
| BT_DBG("%s: SDIO suspend", hcidev->name); |
| hci_suspend_dev(hcidev); |
| |
| if (priv->adapter->hs_state != HS_ACTIVATED) { |
| if (btmrvl_enable_hs(priv)) { |
| BT_ERR("HS not actived, suspend failed!"); |
| priv->adapter->is_suspending = false; |
| return -EBUSY; |
| } |
| } |
| |
| priv->adapter->is_suspending = false; |
| priv->adapter->is_suspended = true; |
| |
| /* We will keep the power when hs enabled successfully */ |
| if (priv->adapter->hs_state == HS_ACTIVATED) { |
| BT_DBG("suspend with MMC_PM_KEEP_POWER"); |
| return sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); |
| } else { |
| BT_DBG("suspend without MMC_PM_KEEP_POWER"); |
| return 0; |
| } |
| } |
| |
| static int btmrvl_sdio_resume(struct device *dev) |
| { |
| struct sdio_func *func = dev_to_sdio_func(dev); |
| struct btmrvl_sdio_card *card; |
| struct btmrvl_private *priv; |
| mmc_pm_flag_t pm_flags; |
| struct hci_dev *hcidev; |
| |
| if (func) { |
| pm_flags = sdio_get_host_pm_caps(func); |
| BT_DBG("%s: resume: PM flags = 0x%x", sdio_func_id(func), |
| pm_flags); |
| card = sdio_get_drvdata(func); |
| if (!card || !card->priv) { |
| BT_ERR("card or priv structure is not valid"); |
| return 0; |
| } |
| } else { |
| BT_ERR("sdio_func is not specified"); |
| return 0; |
| } |
| priv = card->priv; |
| |
| if (!priv->adapter->is_suspended) { |
| BT_DBG("device already resumed"); |
| return 0; |
| } |
| |
| priv->hw_wakeup_firmware(priv); |
| priv->adapter->hs_state = HS_DEACTIVATED; |
| hcidev = priv->btmrvl_dev.hcidev; |
| BT_DBG("%s: HS DEACTIVATED in resume!", hcidev->name); |
| priv->adapter->is_suspended = false; |
| BT_DBG("%s: SDIO resume", hcidev->name); |
| hci_resume_dev(hcidev); |
| |
| /* Disable platform specific wakeup interrupt */ |
| if (card->plt_wake_cfg && card->plt_wake_cfg->irq_bt >= 0) { |
| disable_irq_wake(card->plt_wake_cfg->irq_bt); |
| disable_irq(card->plt_wake_cfg->irq_bt); |
| if (card->plt_wake_cfg->wake_by_bt) |
| /* Undo our disable, since interrupt handler already |
| * did this. |
| */ |
| enable_irq(card->plt_wake_cfg->irq_bt); |
| } |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops btmrvl_sdio_pm_ops = { |
| .suspend = btmrvl_sdio_suspend, |
| .resume = btmrvl_sdio_resume, |
| }; |
| |
| static struct sdio_driver bt_mrvl_sdio = { |
| .name = "btmrvl_sdio", |
| .id_table = btmrvl_sdio_ids, |
| .probe = btmrvl_sdio_probe, |
| .remove = btmrvl_sdio_remove, |
| .drv = { |
| .owner = THIS_MODULE, |
| .pm = &btmrvl_sdio_pm_ops, |
| } |
| }; |
| |
| static int __init btmrvl_sdio_init_module(void) |
| { |
| if (sdio_register_driver(&bt_mrvl_sdio) != 0) { |
| BT_ERR("SDIO Driver Registration Failed"); |
| return -ENODEV; |
| } |
| |
| /* Clear the flag in case user removes the card. */ |
| user_rmmod = 0; |
| |
| return 0; |
| } |
| |
| static void __exit btmrvl_sdio_exit_module(void) |
| { |
| /* Set the flag as user is removing this module. */ |
| user_rmmod = 1; |
| |
| sdio_unregister_driver(&bt_mrvl_sdio); |
| } |
| |
| module_init(btmrvl_sdio_init_module); |
| module_exit(btmrvl_sdio_exit_module); |
| |
| MODULE_AUTHOR("Marvell International Ltd."); |
| MODULE_DESCRIPTION("Marvell BT-over-SDIO driver ver " VERSION); |
| MODULE_VERSION(VERSION); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_FIRMWARE("mrvl/sd8688_helper.bin"); |
| MODULE_FIRMWARE("mrvl/sd8688.bin"); |
| MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin"); |
| MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin"); |
| MODULE_FIRMWARE("mrvl/sd8887_uapsta.bin"); |
| MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin"); |
| MODULE_FIRMWARE("mrvl/sd8997_uapsta.bin"); |