[MTD] maps/Kconfig: Simplify and update dependencies
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 7f1ce08..94a693f 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -94,7 +94,10 @@
config MTD_TS5500
tristate "JEDEC Flash device mapped on Technologic Systems TS-5500"
- depends on X86 && MTD_JEDECPROBE && MTD_PARTITIONS
+ depends on ELAN
+ select MTD_PARTITIONS
+ select MTD_JEDECPROBE
+ select MTD_CFI_AMDSTD
help
This provides a driver for the on-board flash of the Technologic
System's TS-5500 board. The 2MB flash is split into 3 partitions
@@ -210,7 +213,7 @@
config MTD_ALCHEMY
tristate ' AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support'
- depends on MIPS && SOC_AU1X00
+ depends on SOC_AU1X00
help
Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
@@ -248,14 +251,14 @@
config MTD_SBC8240
tristate "Flash device on SBC8240"
- depends on PPC32 && MTD_JEDECPROBE && 6xx && 8260
+ depends on MTD_JEDECPROBE && 8260
help
Flash access on the SBC8240 board from Wind River. See
<http://www.windriver.com/products/sbc8240/>
config MTD_TQM8XXL
tristate "CFI Flash device mapped on TQM8XXL"
- depends on MTD_CFI && PPC32 && 8xx && TQM8xxL
+ depends on MTD_CFI && TQM8xxL
help
The TQM8xxL PowerPC board has up to two banks of CFI-compliant
chips, currently uses AMD one. This 'mapping' driver supports
@@ -265,7 +268,7 @@
config MTD_RPXLITE
tristate "CFI Flash device mapped on RPX Lite or CLLF"
- depends on MTD_CFI && PPC32 && 8xx && (RPXCLASSIC || RPXLITE)
+ depends on MTD_CFI && (RPXCLASSIC || RPXLITE)
help
The RPXLite PowerPC board has CFI-compliant chips mapped in
a strange sparse mapping. This 'mapping' driver supports that
@@ -275,7 +278,7 @@
config MTD_MBX860
tristate "System flash on MBX860 board"
- depends on MTD_CFI && PPC32 && 8xx && MBX
+ depends on MTD_CFI && MBX
help
This enables access routines for the flash chips on the Motorola
MBX860 board. If you have one of these boards and would like
@@ -283,7 +286,7 @@
config MTD_DBOX2
tristate "CFI Flash device mapped on D-Box2"
- depends on PPC32 && 8xx && DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD
+ depends on DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD
help
This enables access routines for the flash chips on the Nokia/Sagem
D-Box 2 board. If you have one of these boards and would like to use
@@ -291,14 +294,14 @@
config MTD_CFI_FLAGADM
tristate "CFI Flash device mapping on FlagaDM"
- depends on PPC32 && 8xx && MTD_CFI
+ depends on 8xx && MTD_CFI
help
Mapping for the Flaga digital module. If you don't have one, ignore
this setting.
config MTD_BEECH
tristate "CFI Flash device mapped on IBM 405LP Beech"
- depends on MTD_CFI && PPC32 && 40x && BEECH
+ depends on MTD_CFI && BEECH
help
This enables access routines for the flash chips on the IBM
405LP Beech board. If you have one of these boards and would like
@@ -306,7 +309,7 @@
config MTD_ARCTIC
tristate "CFI Flash device mapped on IBM 405LP Arctic"
- depends on MTD_CFI && PPC32 && 40x && ARCTIC2
+ depends on MTD_CFI && ARCTIC2
help
This enables access routines for the flash chips on the IBM 405LP
Arctic board. If you have one of these boards and would like to
@@ -314,7 +317,7 @@
config MTD_WALNUT
tristate "Flash device mapped on IBM 405GP Walnut"
- depends on MTD_JEDECPROBE && PPC32 && 40x && WALNUT
+ depends on MTD_JEDECPROBE && WALNUT
help
This enables access routines for the flash chips on the IBM 405GP
Walnut board. If you have one of these boards and would like to
@@ -322,7 +325,7 @@
config MTD_EBONY
tristate "Flash devices mapped on IBM 440GP Ebony"
- depends on MTD_JEDECPROBE && PPC32 && 44x && EBONY
+ depends on MTD_JEDECPROBE && EBONY
help
This enables access routines for the flash chips on the IBM 440GP
Ebony board. If you have one of these boards and would like to
@@ -330,7 +333,7 @@
config MTD_OCOTEA
tristate "Flash devices mapped on IBM 440GX Ocotea"
- depends on MTD_CFI && PPC32 && 44x && OCOTEA
+ depends on MTD_CFI && OCOTEA
help
This enables access routines for the flash chips on the IBM 440GX
Ocotea board. If you have one of these boards and would like to
@@ -338,7 +341,7 @@
config MTD_REDWOOD
tristate "CFI Flash devices mapped on IBM Redwood"
- depends on MTD_CFI && PPC32 && 4xx && 40x && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
+ depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
help
This enables access routines for the flash chips on the IBM
Redwood board. If you have one of these boards and would like to
@@ -409,14 +412,14 @@
config MTD_CDB89712
tristate "Cirrus CDB89712 evaluation board mappings"
- depends on ARM && MTD_CFI && ARCH_CDB89712
+ depends on MTD_CFI && ARCH_CDB89712
help
This enables access to the flash or ROM chips on the CDB89712 board.
If you have such a board, say 'Y'.
config MTD_SA1100
tristate "CFI Flash device mapped on StrongARM SA11x0"
- depends on ARM && MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS
+ depends on MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS
help
This enables access to the flash chips on most platforms based on
the SA1100 and SA1110, including the Assabet and the Compaq iPAQ.
@@ -424,13 +427,13 @@
config MTD_IPAQ
tristate "CFI Flash device mapped on Compaq/HP iPAQ"
- depends on ARM && IPAQ_HANDHELD && MTD_CFI
+ depends on IPAQ_HANDHELD && MTD_CFI
help
This provides a driver for the on-board flash of the iPAQ.
config MTD_DC21285
tristate "CFI Flash device mapped on DC21285 Footbridge"
- depends on ARM && MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS
+ depends on MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS
help
This provides a driver for the flash accessed using Intel's
21285 bridge used with Intel's StrongARM processors. More info at
@@ -438,7 +441,7 @@
config MTD_IQ80310
tristate "CFI Flash device mapped on the XScale IQ80310 board"
- depends on ARM && MTD_CFI && ARCH_IQ80310
+ depends on MTD_CFI && ARCH_IQ80310
help
This enables access routines for the flash chips on the Intel XScale
IQ80310 evaluation board. If you have one of these boards and would
@@ -446,7 +449,7 @@
config MTD_IXP4XX
tristate "CFI Flash device mapped on Intel IXP4xx based systems"
- depends on ARM && MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP4XX
+ depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP4XX
help
This enables MTD access to flash devices on platforms based
on Intel's IXP4xx family of network processors such as the
@@ -455,7 +458,7 @@
config MTD_IXP2000
tristate "CFI Flash device mapped on Intel IXP2000 based systems"
- depends on ARM && MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000
+ depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000
help
This enables MTD access to flash devices on platforms based
on Intel's IXP2000 family of network processors such as the
@@ -464,7 +467,7 @@
config MTD_EPXA10DB
tristate "CFI Flash device mapped on Epxa10db"
- depends on ARM && MTD_CFI && MTD_PARTITIONS && ARCH_CAMELOT
+ depends on MTD_CFI && MTD_PARTITIONS && ARCH_CAMELOT
help
This enables support for the flash devices on the Altera
Excalibur XA10 Development Board. If you are building a kernel
@@ -472,21 +475,21 @@
config MTD_FORTUNET
tristate "CFI Flash device mapped on the FortuNet board"
- depends on ARM && MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET
+ depends on MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET
help
This enables access to the Flash on the FortuNet board. If you
have such a board, say 'Y'.
config MTD_AUTCPU12
tristate "NV-RAM mapping AUTCPU12 board"
- depends on ARM && ARCH_AUTCPU12
+ depends on ARCH_AUTCPU12
help
This enables access to the NV-RAM on autronix autcpu12 board.
If you have such a board, say 'Y'.
config MTD_EDB7312
tristate "CFI Flash device mapped on EDB7312"
- depends on ARM && MTD_CFI
+ depends on ARCH_EDB7312 && MTD_CFI
help
This enables access to the CFI Flash on the Cogent EDB7312 board.
If you have such a board, say 'Y' here.
@@ -500,7 +503,7 @@
config MTD_CEIVA
tristate "JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame"
- depends on ARM && MTD_JEDECPROBE && ARCH_CEIVA
+ depends on MTD_JEDECPROBE && ARCH_CEIVA
help
This enables access to the flash chips on the Ceiva/Polaroid
PhotoMax Digital Picture Frame.
@@ -508,21 +511,21 @@
config MTD_NOR_TOTO
tristate "NOR Flash device on TOTO board"
- depends on ARM && ARCH_OMAP && OMAP_TOTO
+ depends on ARCH_OMAP && OMAP_TOTO
help
This enables access to the NOR flash on the Texas Instruments
TOTO board.
config MTD_H720X
tristate "Hynix evaluation board mappings"
- depends on ARM && MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
+ depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
help
This enables access to the flash chips on the Hynix evaluation boards.
If you have such a board, say 'Y'.
config MTD_MPC1211
tristate "CFI Flash device mapped on Interface MPC-1211"
- depends on SUPERH && SH_MPC1211 && MTD_CFI
+ depends on SH_MPC1211 && MTD_CFI
help
This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
If you have such a board, say 'Y'.