| /* |
| * linux/arch/frv/mm/fault.c |
| * |
| * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. |
| * - Written by David Howells (dhowells@redhat.com) |
| * - Derived from arch/m68knommu/mm/fault.c |
| * - Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, |
| * - Copyright (C) 2000 Lineo, Inc. (www.lineo.com) |
| * |
| * Based on: |
| * |
| * linux/arch/m68k/mm/fault.c |
| * |
| * Copyright (C) 1995 Hamish Macdonald |
| */ |
| |
| #include <linux/mman.h> |
| #include <linux/mm.h> |
| #include <linux/kernel.h> |
| #include <linux/ptrace.h> |
| #include <linux/hardirq.h> |
| |
| #include <asm/system.h> |
| #include <asm/pgtable.h> |
| #include <asm/uaccess.h> |
| #include <asm/gdb-stub.h> |
| |
| /*****************************************************************************/ |
| /* |
| * This routine handles page faults. It determines the problem, and |
| * then passes it off to one of the appropriate routines. |
| */ |
| asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear0) |
| { |
| struct vm_area_struct *vma; |
| struct mm_struct *mm; |
| unsigned long _pme, lrai, lrad, fixup; |
| siginfo_t info; |
| pgd_t *pge; |
| pud_t *pue; |
| pte_t *pte; |
| int write; |
| int fault; |
| |
| #if 0 |
| const char *atxc[16] = { |
| [0x0] = "mmu-miss", [0x8] = "multi-dat", [0x9] = "multi-sat", |
| [0xa] = "tlb-miss", [0xc] = "privilege", [0xd] = "write-prot", |
| }; |
| |
| printk("do_page_fault(%d,%lx [%s],%lx)\n", |
| datammu, esr0, atxc[esr0 >> 20 & 0xf], ear0); |
| #endif |
| |
| mm = current->mm; |
| |
| /* |
| * We fault-in kernel-space virtual memory on-demand. The |
| * 'reference' page table is init_mm.pgd. |
| * |
| * NOTE! We MUST NOT take any locks for this case. We may |
| * be in an interrupt or a critical region, and should |
| * only copy the information from the master page table, |
| * nothing more. |
| * |
| * This verifies that the fault happens in kernel space |
| * and that the fault was a page not present (invalid) error |
| */ |
| if (!user_mode(__frame) && (esr0 & ESR0_ATXC) == ESR0_ATXC_AMRTLB_MISS) { |
| if (ear0 >= VMALLOC_START && ear0 < VMALLOC_END) |
| goto kernel_pte_fault; |
| if (ear0 >= PKMAP_BASE && ear0 < PKMAP_END) |
| goto kernel_pte_fault; |
| } |
| |
| info.si_code = SEGV_MAPERR; |
| |
| /* |
| * If we're in an interrupt or have no user |
| * context, we must not take the fault.. |
| */ |
| if (in_atomic() || !mm) |
| goto no_context; |
| |
| down_read(&mm->mmap_sem); |
| |
| vma = find_vma(mm, ear0); |
| if (!vma) |
| goto bad_area; |
| if (vma->vm_start <= ear0) |
| goto good_area; |
| if (!(vma->vm_flags & VM_GROWSDOWN)) |
| goto bad_area; |
| |
| if (user_mode(__frame)) { |
| /* |
| * accessing the stack below %esp is always a bug. |
| * The "+ 32" is there due to some instructions (like |
| * pusha) doing post-decrement on the stack and that |
| * doesn't show up until later.. |
| */ |
| if ((ear0 & PAGE_MASK) + 2 * PAGE_SIZE < __frame->sp) { |
| #if 0 |
| printk("[%d] ### Access below stack @%lx (sp=%lx)\n", |
| current->pid, ear0, __frame->sp); |
| show_registers(__frame); |
| printk("[%d] ### Code: [%08lx] %02x %02x %02x %02x %02x %02x %02x %02x\n", |
| current->pid, |
| __frame->pc, |
| ((u8*)__frame->pc)[0], |
| ((u8*)__frame->pc)[1], |
| ((u8*)__frame->pc)[2], |
| ((u8*)__frame->pc)[3], |
| ((u8*)__frame->pc)[4], |
| ((u8*)__frame->pc)[5], |
| ((u8*)__frame->pc)[6], |
| ((u8*)__frame->pc)[7] |
| ); |
| #endif |
| goto bad_area; |
| } |
| } |
| |
| if (expand_stack(vma, ear0)) |
| goto bad_area; |
| |
| /* |
| * Ok, we have a good vm_area for this memory access, so |
| * we can handle it.. |
| */ |
| good_area: |
| info.si_code = SEGV_ACCERR; |
| write = 0; |
| switch (esr0 & ESR0_ATXC) { |
| default: |
| /* handle write to write protected page */ |
| case ESR0_ATXC_WP_EXCEP: |
| #ifdef TEST_VERIFY_AREA |
| if (!(user_mode(__frame))) |
| printk("WP fault at %08lx\n", __frame->pc); |
| #endif |
| if (!(vma->vm_flags & VM_WRITE)) |
| goto bad_area; |
| write = 1; |
| break; |
| |
| /* handle read from protected page */ |
| case ESR0_ATXC_PRIV_EXCEP: |
| goto bad_area; |
| |
| /* handle read, write or exec on absent page |
| * - can't support write without permitting read |
| * - don't support execute without permitting read and vice-versa |
| */ |
| case ESR0_ATXC_AMRTLB_MISS: |
| if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC))) |
| goto bad_area; |
| break; |
| } |
| |
| /* |
| * If for any reason at all we couldn't handle the fault, |
| * make sure we exit gracefully rather than endlessly redo |
| * the fault. |
| */ |
| fault = handle_mm_fault(mm, vma, ear0, write); |
| if (unlikely(fault & VM_FAULT_ERROR)) { |
| if (fault & VM_FAULT_OOM) |
| goto out_of_memory; |
| else if (fault & VM_FAULT_SIGBUS) |
| goto do_sigbus; |
| BUG(); |
| } |
| if (fault & VM_FAULT_MAJOR) |
| current->maj_flt++; |
| else |
| current->min_flt++; |
| |
| up_read(&mm->mmap_sem); |
| return; |
| |
| /* |
| * Something tried to access memory that isn't in our memory map.. |
| * Fix it, but check if it's kernel or user first.. |
| */ |
| bad_area: |
| up_read(&mm->mmap_sem); |
| |
| /* User mode accesses just cause a SIGSEGV */ |
| if (user_mode(__frame)) { |
| info.si_signo = SIGSEGV; |
| info.si_errno = 0; |
| /* info.si_code has been set above */ |
| info.si_addr = (void *) ear0; |
| force_sig_info(SIGSEGV, &info, current); |
| return; |
| } |
| |
| no_context: |
| /* are we prepared to handle this kernel fault? */ |
| if ((fixup = search_exception_table(__frame->pc)) != 0) { |
| __frame->pc = fixup; |
| return; |
| } |
| |
| /* |
| * Oops. The kernel tried to access some bad page. We'll have to |
| * terminate things with extreme prejudice. |
| */ |
| |
| bust_spinlocks(1); |
| |
| if (ear0 < PAGE_SIZE) |
| printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); |
| else |
| printk(KERN_ALERT "Unable to handle kernel paging request"); |
| printk(" at virtual addr %08lx\n", ear0); |
| printk(" PC : %08lx\n", __frame->pc); |
| printk(" EXC : esr0=%08lx ear0=%08lx\n", esr0, ear0); |
| |
| asm("lrai %1,%0,#1,#0,#0" : "=&r"(lrai) : "r"(ear0)); |
| asm("lrad %1,%0,#1,#0,#0" : "=&r"(lrad) : "r"(ear0)); |
| |
| printk(KERN_ALERT " LRAI: %08lx\n", lrai); |
| printk(KERN_ALERT " LRAD: %08lx\n", lrad); |
| |
| __break_hijack_kernel_event(); |
| |
| pge = pgd_offset(current->mm, ear0); |
| pue = pud_offset(pge, ear0); |
| _pme = pue->pue[0].ste[0]; |
| |
| printk(KERN_ALERT " PGE : %8p { PME %08lx }\n", pge, _pme); |
| |
| if (_pme & xAMPRx_V) { |
| unsigned long dampr, damlr, val; |
| |
| asm volatile("movsg dampr2,%0 ! movgs %2,dampr2 ! movsg damlr2,%1" |
| : "=&r"(dampr), "=r"(damlr) |
| : "r" (_pme | xAMPRx_L|xAMPRx_SS_16Kb|xAMPRx_S|xAMPRx_C|xAMPRx_V) |
| ); |
| |
| pte = (pte_t *) damlr + __pte_index(ear0); |
| val = pte_val(*pte); |
| |
| asm volatile("movgs %0,dampr2" :: "r" (dampr)); |
| |
| printk(KERN_ALERT " PTE : %8p { %08lx }\n", pte, val); |
| } |
| |
| die_if_kernel("Oops\n"); |
| do_exit(SIGKILL); |
| |
| /* |
| * We ran out of memory, or some other thing happened to us that made |
| * us unable to handle the page fault gracefully. |
| */ |
| out_of_memory: |
| up_read(&mm->mmap_sem); |
| printk("VM: killing process %s\n", current->comm); |
| if (user_mode(__frame)) |
| do_exit(SIGKILL); |
| goto no_context; |
| |
| do_sigbus: |
| up_read(&mm->mmap_sem); |
| |
| /* |
| * Send a sigbus, regardless of whether we were in kernel |
| * or user mode. |
| */ |
| info.si_signo = SIGBUS; |
| info.si_errno = 0; |
| info.si_code = BUS_ADRERR; |
| info.si_addr = (void *) ear0; |
| force_sig_info(SIGBUS, &info, current); |
| |
| /* Kernel mode? Handle exceptions or die */ |
| if (!user_mode(__frame)) |
| goto no_context; |
| return; |
| |
| /* |
| * The fault was caused by a kernel PTE (such as installed by vmalloc or kmap) |
| */ |
| kernel_pte_fault: |
| { |
| /* |
| * Synchronize this task's top level page-table |
| * with the 'reference' page table. |
| * |
| * Do _not_ use "tsk" here. We might be inside |
| * an interrupt in the middle of a task switch.. |
| */ |
| int index = pgd_index(ear0); |
| pgd_t *pgd, *pgd_k; |
| pud_t *pud, *pud_k; |
| pmd_t *pmd, *pmd_k; |
| pte_t *pte_k; |
| |
| pgd = (pgd_t *) __get_TTBR(); |
| pgd = (pgd_t *)__va(pgd) + index; |
| pgd_k = ((pgd_t *)(init_mm.pgd)) + index; |
| |
| if (!pgd_present(*pgd_k)) |
| goto no_context; |
| //set_pgd(pgd, *pgd_k); /////// gcc ICE's on this line |
| |
| pud_k = pud_offset(pgd_k, ear0); |
| if (!pud_present(*pud_k)) |
| goto no_context; |
| |
| pmd_k = pmd_offset(pud_k, ear0); |
| if (!pmd_present(*pmd_k)) |
| goto no_context; |
| |
| pud = pud_offset(pgd, ear0); |
| pmd = pmd_offset(pud, ear0); |
| set_pmd(pmd, *pmd_k); |
| |
| pte_k = pte_offset_kernel(pmd_k, ear0); |
| if (!pte_present(*pte_k)) |
| goto no_context; |
| return; |
| } |
| } /* end do_page_fault() */ |