bnx2x: Adjust BCM8726 module detection settings
Move BCM8726 module detection code into a separate function to be called only once during initialization.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 81bcd61..e44c19d 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -1915,8 +1915,15 @@
PORT_HW_CFG_MEDIA_TYPE_PHY2_SHIFT;
DP(NETIF_MSG_LINK, "media_types = 0x%x\n", media_types);
- DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x\n",
- vars->link_status, vars->phy_link_up);
+ /* Sync AEU offset */
+ sync_offset = params->shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].aeu_int_mask);
+
+ vars->aeu_int_mask = REG_RD(bp, sync_offset);
+
+ DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x int_mask 0x%x\n",
+ vars->link_status, vars->phy_link_up, vars->aeu_int_mask);
DP(NETIF_MSG_LINK, "line_speed %x duplex %x flow_ctrl 0x%x\n",
vars->line_speed, vars->duplex, vars->flow_ctrl);
}
@@ -5522,8 +5529,6 @@
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
- u32 val;
- u32 swap_val, swap_override, aeu_gpio_mask, offset;
DP(NETIF_MSG_LINK, "Initializing BCM8726\n");
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15);
@@ -5602,30 +5607,6 @@
phy->tx_preemphasis[1]);
}
- /* Set GPIO3 to trigger SFP+ module insertion/removal */
- bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
- MISC_REGISTERS_GPIO_INPUT_HI_Z, params->port);
-
- /* The GPIO should be swapped if the swap register is set and active */
- swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
- swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
-
- /* Select function upon port-swap configuration */
- if (params->port == 0) {
- offset = MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
- aeu_gpio_mask = (swap_val && swap_override) ?
- AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 :
- AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0;
- } else {
- offset = MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0;
- aeu_gpio_mask = (swap_val && swap_override) ?
- AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 :
- AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1;
- }
- val = REG_RD(bp, offset);
- /* add GPIO3 to group */
- val |= aeu_gpio_mask;
- REG_WR(bp, offset, val);
return 0;
}
@@ -8521,3 +8502,66 @@
}
}
}
+
+void bnx2x_init_mod_abs_int(struct bnx2x *bp, struct link_vars *vars,
+ u32 chip_id, u32 shmem_base, u32 shmem2_base,
+ u8 port)
+{
+ u8 gpio_num = 0xff, gpio_port = 0xff, phy_index;
+ u32 val;
+ u32 offset, aeu_mask, swap_val, swap_override, sync_offset;
+
+ {
+ struct bnx2x_phy phy;
+ for (phy_index = EXT_PHY1; phy_index < MAX_PHYS;
+ phy_index++) {
+ if (bnx2x_populate_phy(bp, phy_index, shmem_base,
+ shmem2_base, port, &phy)
+ != 0) {
+ DP(NETIF_MSG_LINK, "populate phy failed\n");
+ return;
+ }
+ if (phy.type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) {
+ gpio_num = MISC_REGISTERS_GPIO_3;
+ gpio_port = port;
+ break;
+ }
+ }
+ }
+
+ if (gpio_num == 0xff)
+ return;
+
+ /* Set GPIO3 to trigger SFP+ module insertion/removal */
+ bnx2x_set_gpio(bp, gpio_num, MISC_REGISTERS_GPIO_INPUT_HI_Z, gpio_port);
+
+ swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
+ swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
+ gpio_port ^= (swap_val && swap_override);
+
+ vars->aeu_int_mask = AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0 <<
+ (gpio_num + (gpio_port << 2));
+
+ sync_offset = shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].aeu_int_mask);
+ REG_WR(bp, sync_offset, vars->aeu_int_mask);
+
+ DP(NETIF_MSG_LINK, "Setting MOD_ABS (GPIO%d_P%d) AEU to 0x%x\n",
+ gpio_num, gpio_port, vars->aeu_int_mask);
+
+ if (port == 0)
+ offset = MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
+ else
+ offset = MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0;
+
+ /* Open appropriate AEU for interrupts */
+ aeu_mask = REG_RD(bp, offset);
+ aeu_mask |= vars->aeu_int_mask;
+ REG_WR(bp, offset, aeu_mask);
+
+ /* Enable the GPIO to trigger interrupt */
+ val = REG_RD(bp, MISC_REG_GPIO_EVENT_EN);
+ val |= 1 << (gpio_num + (gpio_port << 2));
+ REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val);
+}