gma500: initial medfield merge

We need to merge this ahead of some of the cleanup because a lot of needed
cleanup spans both new and old chips. If we try and clean up and the merge
we end up fighting ourselves.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
[With a load of the cleanup stuff folded in, register stuff reworked sanely]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.c b/drivers/gpu/drm/gma500/mdfld_dsi_output.c
new file mode 100644
index 0000000..9338c28
--- /dev/null
+++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.c
@@ -0,0 +1,635 @@
+/*
+ * Copyright © 2010 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * jim liu <jim.liu@intel.com>
+ * Jackie Li<yaodong.li@intel.com>
+ */
+
+#include <linux/module.h>
+
+#include "mdfld_dsi_output.h"
+#include "mdfld_dsi_dpi.h"
+#include "mdfld_output.h"
+#include "mdfld_dsi_pkg_sender.h"
+#include "tc35876x-dsi-lvds.h"
+#include <linux/pm_runtime.h>
+#include <asm/intel_scu_ipc.h>
+
+/* get the LABC from command line. */
+static int LABC_control = 1;
+
+#ifdef MODULE
+module_param(LABC_control, int, 0644);
+#else
+
+static int __init parse_LABC_control(char *arg)
+{
+	/* LABC control can be passed in as a cmdline parameter */
+	/* to enable this feature add LABC=1 to cmdline */
+	/* to disable this feature add LABC=0 to cmdline */
+	if (!arg)
+		return -EINVAL;
+
+	if (!strcasecmp(arg, "0"))
+		LABC_control = 0;
+	else if (!strcasecmp(arg, "1"))
+		LABC_control = 1;
+
+	return 0;
+}
+early_param("LABC", parse_LABC_control);
+#endif
+
+/**
+ * Check and see if the generic control or data buffer is empty and ready.
+ */
+void mdfld_dsi_gen_fifo_ready(struct drm_device *dev, u32 gen_fifo_stat_reg,
+							u32 fifo_stat)
+{
+	u32 GEN_BF_time_out_count;
+
+	/* Check MIPI Adatper command registers */
+	for (GEN_BF_time_out_count = 0;
+			GEN_BF_time_out_count < GEN_FB_TIME_OUT;
+			GEN_BF_time_out_count++) {
+		if ((REG_READ(gen_fifo_stat_reg) & fifo_stat) == fifo_stat)
+			break;
+		udelay(100);
+	}
+
+	if (GEN_BF_time_out_count == GEN_FB_TIME_OUT)
+		DRM_ERROR("mdfld_dsi_gen_fifo_ready, Timeout. gen_fifo_stat_reg = 0x%x.\n",
+					gen_fifo_stat_reg);
+}
+
+/**
+ * Manage the DSI MIPI keyboard and display brightness.
+ * FIXME: this is exported to OSPM code. should work out an specific
+ * display interface to OSPM.
+ */
+
+void mdfld_dsi_brightness_init(struct mdfld_dsi_config *dsi_config, int pipe)
+{
+	struct mdfld_dsi_pkg_sender *sender =
+				mdfld_dsi_get_pkg_sender(dsi_config);
+	struct drm_device *dev = sender->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 gen_ctrl_val;
+
+	if (!sender) {
+		DRM_ERROR("No sender found\n");
+		return;
+	}
+
+	/* Set default display backlight value to 85% (0xd8)*/
+	mdfld_dsi_send_mcs_short(sender, write_display_brightness, 0xd8, 1,
+				true);
+
+	/* Set minimum brightness setting of CABC function to 20% (0x33)*/
+	mdfld_dsi_send_mcs_short(sender, write_cabc_min_bright, 0x33, 1, true);
+
+	/* Enable backlight or/and LABC */
+	gen_ctrl_val = BRIGHT_CNTL_BLOCK_ON | DISPLAY_DIMMING_ON |
+								BACKLIGHT_ON;
+	if (LABC_control == 1)
+		gen_ctrl_val |= DISPLAY_DIMMING_ON | DISPLAY_BRIGHTNESS_AUTO
+								| GAMMA_AUTO;
+
+	if (LABC_control == 1)
+		gen_ctrl_val |= AMBIENT_LIGHT_SENSE_ON;
+
+	dev_priv->mipi_ctrl_display = gen_ctrl_val;
+
+	mdfld_dsi_send_mcs_short(sender, write_ctrl_display, (u8)gen_ctrl_val,
+				1, true);
+
+	mdfld_dsi_send_mcs_short(sender, write_ctrl_cabc, UI_IMAGE, 1, true);
+}
+
+void mdfld_dsi_brightness_control(struct drm_device *dev, int pipe, int level)
+{
+	struct mdfld_dsi_pkg_sender *sender;
+	struct drm_psb_private *dev_priv;
+	struct mdfld_dsi_config *dsi_config;
+	u32 gen_ctrl_val = 0;
+	int p_type = TMD_VID;
+
+	if (!dev || (pipe != 0 && pipe != 2)) {
+		DRM_ERROR("Invalid parameter\n");
+		return;
+	}
+
+	p_type = mdfld_get_panel_type(dev, 0);
+
+	dev_priv = dev->dev_private;
+
+	if (pipe)
+		dsi_config = dev_priv->dsi_configs[1];
+	else
+		dsi_config = dev_priv->dsi_configs[0];
+
+	sender = mdfld_dsi_get_pkg_sender(dsi_config);
+
+	if (!sender) {
+		DRM_ERROR("No sender found\n");
+		return;
+	}
+
+	gen_ctrl_val = (level * 0xff / MDFLD_DSI_BRIGHTNESS_MAX_LEVEL) & 0xff;
+
+	dev_dbg(sender->dev->dev, "pipe = %d, gen_ctrl_val = %d.\n",
+							pipe, gen_ctrl_val);
+
+	if (p_type == TMD_VID) {
+		/* Set display backlight value */
+		mdfld_dsi_send_mcs_short(sender, tmd_write_display_brightness,
+					(u8)gen_ctrl_val, 1, true);
+	} else {
+		/* Set display backlight value */
+		mdfld_dsi_send_mcs_short(sender, write_display_brightness,
+					(u8)gen_ctrl_val, 1, true);
+
+		/* Enable backlight control */
+		if (level == 0)
+			gen_ctrl_val = 0;
+		else
+			gen_ctrl_val = dev_priv->mipi_ctrl_display;
+
+		mdfld_dsi_send_mcs_short(sender, write_ctrl_display,
+					(u8)gen_ctrl_val, 1, true);
+	}
+}
+
+static int mdfld_dsi_get_panel_status(struct mdfld_dsi_config *dsi_config,
+				u8 dcs, u32 *data, bool hs)
+{
+	struct mdfld_dsi_pkg_sender *sender
+		= mdfld_dsi_get_pkg_sender(dsi_config);
+
+	if (!sender || !data) {
+		DRM_ERROR("Invalid parameter\n");
+		return -EINVAL;
+	}
+
+	return mdfld_dsi_read_mcs(sender, dcs, data, 1, hs);
+}
+
+int mdfld_dsi_get_power_mode(struct mdfld_dsi_config *dsi_config, u32 *mode,
+			bool hs)
+{
+	if (!dsi_config || !mode) {
+		DRM_ERROR("Invalid parameter\n");
+		return -EINVAL;
+	}
+
+	return mdfld_dsi_get_panel_status(dsi_config, 0x0a, mode, hs);
+}
+
+int mdfld_dsi_get_diagnostic_result(struct mdfld_dsi_config *dsi_config,
+				u32 *result, bool hs)
+{
+	if (!dsi_config || !result) {
+		DRM_ERROR("Invalid parameter\n");
+		return -EINVAL;
+	}
+
+	return mdfld_dsi_get_panel_status(dsi_config, 0x0f, result, hs);
+}
+
+/*
+ * NOTE: this function was used by OSPM.
+ * TODO: will be removed later, should work out display interfaces for OSPM
+ */
+void mdfld_dsi_controller_init(struct mdfld_dsi_config *dsi_config, int pipe)
+{
+	if (!dsi_config || ((pipe != 0) && (pipe != 2))) {
+		DRM_ERROR("Invalid parameters\n");
+		return;
+	}
+
+	mdfld_dsi_dpi_controller_init(dsi_config, pipe);
+}
+
+static void mdfld_dsi_connector_save(struct drm_connector *connector)
+{
+}
+
+static void mdfld_dsi_connector_restore(struct drm_connector *connector)
+{
+}
+
+/* FIXME: start using the force parameter */
+static enum drm_connector_status
+mdfld_dsi_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct mdfld_dsi_connector *dsi_connector
+		= mdfld_dsi_connector(connector);
+
+	dsi_connector->status = connector_status_connected;
+
+	return dsi_connector->status;
+}
+
+static int mdfld_dsi_connector_set_property(struct drm_connector *connector,
+				struct drm_property *property,
+				uint64_t value)
+{
+	struct drm_encoder *encoder = connector->encoder;
+	struct backlight_device *psb_bd;
+
+	if (!strcmp(property->name, "scaling mode") && encoder) {
+		struct psb_intel_crtc *psb_crtc =
+					to_psb_intel_crtc(encoder->crtc);
+		bool centerechange;
+		uint64_t val;
+
+		if (!psb_crtc)
+			goto set_prop_error;
+
+		switch (value) {
+		case DRM_MODE_SCALE_FULLSCREEN:
+			break;
+		case DRM_MODE_SCALE_NO_SCALE:
+			break;
+		case DRM_MODE_SCALE_ASPECT:
+			break;
+		default:
+			goto set_prop_error;
+		}
+
+		if (drm_connector_property_get_value(connector, property, &val))
+			goto set_prop_error;
+
+		if (val == value)
+			goto set_prop_done;
+
+		if (drm_connector_property_set_value(connector,
+							property, value))
+			goto set_prop_error;
+
+		centerechange = (val == DRM_MODE_SCALE_NO_SCALE) ||
+			(value == DRM_MODE_SCALE_NO_SCALE);
+
+		if (psb_crtc->saved_mode.hdisplay != 0 &&
+		    psb_crtc->saved_mode.vdisplay != 0) {
+			if (centerechange) {
+				if (!drm_crtc_helper_set_mode(encoder->crtc,
+						&psb_crtc->saved_mode,
+						encoder->crtc->x,
+						encoder->crtc->y,
+						encoder->crtc->fb))
+					goto set_prop_error;
+			} else {
+				struct drm_encoder_helper_funcs *funcs =
+						encoder->helper_private;
+				funcs->mode_set(encoder,
+					&psb_crtc->saved_mode,
+					&psb_crtc->saved_adjusted_mode);
+			}
+		}
+	} else if (!strcmp(property->name, "backlight") && encoder) {
+		if (drm_connector_property_set_value(connector, property,
+									value))
+			goto set_prop_error;
+		else {
+			psb_bd = mdfld_get_backlight_device();
+			if (psb_bd) {
+				psb_bd->props.brightness = value;
+				mdfld_set_brightness(psb_bd);
+			}
+		}
+	}
+set_prop_done:
+	return 0;
+set_prop_error:
+	return -1;
+}
+
+static void mdfld_dsi_connector_destroy(struct drm_connector *connector)
+{
+	struct mdfld_dsi_connector *dsi_connector =
+					mdfld_dsi_connector(connector);
+	struct mdfld_dsi_pkg_sender *sender;
+
+	if (!dsi_connector)
+		return;
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	sender = dsi_connector->pkg_sender;
+	mdfld_dsi_pkg_sender_destroy(sender);
+	kfree(dsi_connector);
+}
+
+static int mdfld_dsi_connector_get_modes(struct drm_connector *connector)
+{
+	struct mdfld_dsi_connector *dsi_connector =
+				mdfld_dsi_connector(connector);
+	struct mdfld_dsi_config *dsi_config =
+				mdfld_dsi_get_config(dsi_connector);
+	struct drm_display_mode *fixed_mode = dsi_config->fixed_mode;
+	struct drm_display_mode *dup_mode = NULL;
+	struct drm_device *dev = connector->dev;
+
+	connector->display_info.min_vfreq = 0;
+	connector->display_info.max_vfreq = 200;
+	connector->display_info.min_hfreq = 0;
+	connector->display_info.max_hfreq = 200;
+
+	if (fixed_mode) {
+		dev_dbg(dev->dev, "fixed_mode %dx%d\n",
+				fixed_mode->hdisplay, fixed_mode->vdisplay);
+		dup_mode = drm_mode_duplicate(dev, fixed_mode);
+		drm_mode_probed_add(connector, dup_mode);
+		return 1;
+	}
+	DRM_ERROR("Didn't get any modes!\n");
+	return 0;
+}
+
+static int mdfld_dsi_connector_mode_valid(struct drm_connector *connector,
+						struct drm_display_mode *mode)
+{
+	struct mdfld_dsi_connector *dsi_connector =
+					mdfld_dsi_connector(connector);
+	struct mdfld_dsi_config *dsi_config =
+					mdfld_dsi_get_config(dsi_connector);
+	struct drm_display_mode *fixed_mode = dsi_config->fixed_mode;
+
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return MODE_NO_INTERLACE;
+
+	/**
+	 * FIXME: current DC has no fitting unit, reject any mode setting
+	 * request
+	 * Will figure out a way to do up-scaling(pannel fitting) later.
+	 **/
+	if (fixed_mode) {
+		if (mode->hdisplay != fixed_mode->hdisplay)
+			return MODE_PANEL;
+
+		if (mode->vdisplay != fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+
+	return MODE_OK;
+}
+
+static void mdfld_dsi_connector_dpms(struct drm_connector *connector, int mode)
+{
+	if (mode == connector->dpms)
+		return;
+
+	/*first, execute dpms*/
+
+	drm_helper_connector_dpms(connector, mode);
+}
+
+static struct drm_encoder *mdfld_dsi_connector_best_encoder(
+				struct drm_connector *connector)
+{
+	struct mdfld_dsi_connector *dsi_connector =
+				mdfld_dsi_connector(connector);
+	struct mdfld_dsi_config *dsi_config =
+				mdfld_dsi_get_config(dsi_connector);
+	return &dsi_config->encoder->base.base;
+}
+
+/*DSI connector funcs*/
+static const struct drm_connector_funcs mdfld_dsi_connector_funcs = {
+	.dpms = /*drm_helper_connector_dpms*/mdfld_dsi_connector_dpms,
+	.save = mdfld_dsi_connector_save,
+	.restore = mdfld_dsi_connector_restore,
+	.detect = mdfld_dsi_connector_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = mdfld_dsi_connector_set_property,
+	.destroy = mdfld_dsi_connector_destroy,
+};
+
+/*DSI connector helper funcs*/
+static const struct drm_connector_helper_funcs
+	mdfld_dsi_connector_helper_funcs = {
+	.get_modes = mdfld_dsi_connector_get_modes,
+	.mode_valid = mdfld_dsi_connector_mode_valid,
+	.best_encoder = mdfld_dsi_connector_best_encoder,
+};
+
+static int mdfld_dsi_get_default_config(struct drm_device *dev,
+				struct mdfld_dsi_config *config, int pipe)
+{
+	if (!dev || !config) {
+		DRM_ERROR("Invalid parameters");
+		return -EINVAL;
+	}
+
+	config->bpp = 24;
+	if (mdfld_get_panel_type(dev, pipe) == TC35876X)
+		config->lane_count = 4;
+	else
+		config->lane_count = 2;
+	config->channel_num = 0;
+
+	if (mdfld_get_panel_type(dev, pipe) == TMD_VID)
+		config->video_mode = MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_PULSE;
+	else if (mdfld_get_panel_type(dev, pipe) == TC35876X)
+		config->video_mode =
+				MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_EVENTS;
+	else
+		config->video_mode = MDFLD_DSI_VIDEO_BURST_MODE;
+
+	return 0;
+}
+
+int mdfld_dsi_panel_reset(int pipe)
+{
+	unsigned gpio;
+	int ret = 0;
+
+	switch (pipe) {
+	case 0:
+		gpio = 128;
+		break;
+	case 2:
+		gpio = 34;
+		break;
+	default:
+		DRM_ERROR("Invalid output\n");
+		return -EINVAL;
+	}
+
+	ret = gpio_request(gpio, "gfx");
+	if (ret) {
+		DRM_ERROR("gpio_rqueset failed\n");
+		return ret;
+	}
+
+	ret = gpio_direction_output(gpio, 1);
+	if (ret) {
+		DRM_ERROR("gpio_direction_output failed\n");
+		goto gpio_error;
+	}
+
+	gpio_get_value(128);
+
+gpio_error:
+	if (gpio_is_valid(gpio))
+		gpio_free(gpio);
+
+	return ret;
+}
+
+/*
+ * MIPI output init
+ * @dev drm device
+ * @pipe pipe number. 0 or 2
+ * @config
+ *
+ * Do the initialization of a MIPI output, including create DRM mode objects
+ * initialization of DSI output on @pipe
+ */
+void mdfld_dsi_output_init(struct drm_device *dev,
+			   int pipe,
+			   struct mdfld_dsi_config *config,
+			   const struct panel_funcs *p_vid_funcs)
+{
+	struct mdfld_dsi_config *dsi_config;
+	struct mdfld_dsi_connector *dsi_connector;
+	struct drm_connector *connector;
+	struct mdfld_dsi_encoder *encoder;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct panel_info dsi_panel_info;
+	u32 width_mm, height_mm;
+
+	dev_dbg(dev->dev, "init DSI output on pipe %d\n", pipe);
+
+	if (!dev || ((pipe != 0) && (pipe != 2))) {
+		DRM_ERROR("Invalid parameter\n");
+		return;
+	}
+
+	/*create a new connetor*/
+	dsi_connector = kzalloc(sizeof(struct mdfld_dsi_connector), GFP_KERNEL);
+	if (!dsi_connector) {
+		DRM_ERROR("No memory");
+		return;
+	}
+
+	dsi_connector->pipe =  pipe;
+
+	/*set DSI config*/
+	if (config)
+		dsi_config = config;
+	else {
+		dsi_config = kzalloc(sizeof(struct mdfld_dsi_config),
+								GFP_KERNEL);
+		if (!dsi_config) {
+			DRM_ERROR("cannot allocate memory for DSI config\n");
+			goto dsi_init_err0;
+		}
+		mdfld_dsi_get_default_config(dev, dsi_config, pipe);
+	}
+
+	dsi_connector->private = dsi_config;
+
+	dsi_config->changed = 1;
+	dsi_config->dev = dev;
+
+	dsi_config->fixed_mode = p_vid_funcs->get_config_mode(dev);
+	if (p_vid_funcs->get_panel_info(dev, pipe, &dsi_panel_info))
+			goto dsi_init_err0;
+
+	width_mm = dsi_panel_info.width_mm;
+	height_mm = dsi_panel_info.height_mm;
+
+	dsi_config->mode = dsi_config->fixed_mode;
+	dsi_config->connector = dsi_connector;
+
+	if (!dsi_config->fixed_mode) {
+		DRM_ERROR("No pannel fixed mode was found\n");
+		goto dsi_init_err0;
+	}
+
+	if (pipe && dev_priv->dsi_configs[0]) {
+		dsi_config->dvr_ic_inited = 0;
+		dev_priv->dsi_configs[1] = dsi_config;
+	} else if (pipe == 0) {
+		dsi_config->dvr_ic_inited = 1;
+		dev_priv->dsi_configs[0] = dsi_config;
+	} else {
+		DRM_ERROR("Trying to init MIPI1 before MIPI0\n");
+		goto dsi_init_err0;
+	}
+
+
+	connector = &dsi_connector->base.base;
+	drm_connector_init(dev, connector, &mdfld_dsi_connector_funcs,
+						DRM_MODE_CONNECTOR_LVDS);
+	drm_connector_helper_add(connector, &mdfld_dsi_connector_helper_funcs);
+
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+	connector->display_info.width_mm = width_mm;
+	connector->display_info.height_mm = height_mm;
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+	/*attach properties*/
+	drm_connector_attach_property(connector,
+				dev->mode_config.scaling_mode_property,
+				DRM_MODE_SCALE_FULLSCREEN);
+	drm_connector_attach_property(connector,
+				dev_priv->backlight_property,
+				MDFLD_DSI_BRIGHTNESS_MAX_LEVEL);
+
+	/*init DSI package sender on this output*/
+	if (mdfld_dsi_pkg_sender_init(dsi_connector, pipe)) {
+		DRM_ERROR("Package Sender initialization failed on pipe %d\n",
+									pipe);
+		goto dsi_init_err0;
+	}
+
+	encoder = mdfld_dsi_dpi_init(dev, dsi_connector, p_vid_funcs);
+	if (!encoder) {
+		DRM_ERROR("Create DPI encoder failed\n");
+		goto dsi_init_err1;
+	}
+	encoder->private = dsi_config;
+	dsi_config->encoder = encoder;
+	encoder->base.type = (pipe == 0) ? INTEL_OUTPUT_MIPI :
+		INTEL_OUTPUT_MIPI2;
+	drm_sysfs_connector_add(connector);
+	return;
+
+	/*TODO: add code to destroy outputs on error*/
+dsi_init_err1:
+	/*destroy sender*/
+	mdfld_dsi_pkg_sender_destroy(dsi_connector->pkg_sender);
+
+	drm_connector_cleanup(connector);
+
+	kfree(dsi_config->fixed_mode);
+	kfree(dsi_config);
+dsi_init_err0:
+	kfree(dsi_connector);
+}