diff --git a/drivers/gpu/drm/gma500/mdfld_intel_display.c b/drivers/gpu/drm/gma500/mdfld_intel_display.c
new file mode 100644
index 0000000..55e5af5
--- /dev/null
+++ b/drivers/gpu/drm/gma500/mdfld_intel_display.c
@@ -0,0 +1,1192 @@
+/*
+ * Copyright Â© 2006-2007 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+
+#include <drm/drmP.h>
+#include "psb_intel_reg.h"
+#include "psb_intel_display.h"
+#include "framebuffer.h"
+#include "mdfld_output.h"
+#include "mdfld_dsi_output.h"
+
+/* Hardcoded currently */
+static int ksel = KSEL_CRYSTAL_19;
+
+struct psb_intel_range_t {
+	int min, max;
+};
+
+struct mrst_limit_t {
+	struct psb_intel_range_t dot, m, p1;
+};
+
+struct mrst_clock_t {
+	/* derived values */
+	int dot;
+	int m;
+	int p1;
+};
+
+#define COUNT_MAX 0x10000000
+
+void mdfldWaitForPipeDisable(struct drm_device *dev, int pipe)
+{
+	int count, temp;
+	u32 pipeconf_reg = PIPEACONF;
+
+	switch (pipe) {
+	case 0:
+		break;
+	case 1:
+		pipeconf_reg = PIPEBCONF;
+		break;
+	case 2:
+		pipeconf_reg = PIPECCONF;
+		break;
+	default:
+		DRM_ERROR("Illegal Pipe Number.\n");
+		return;
+	}
+
+	/* FIXME JLIU7_PO */
+	psb_intel_wait_for_vblank(dev);
+	return;
+
+	/* Wait for for the pipe disable to take effect. */
+	for (count = 0; count < COUNT_MAX; count++) {
+		temp = REG_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_PIPE_STATE) == 0)
+			break;
+	}
+}
+
+void mdfldWaitForPipeEnable(struct drm_device *dev, int pipe)
+{
+	int count, temp;
+	u32 pipeconf_reg = PIPEACONF;
+
+	switch (pipe) {
+	case 0:
+		break;
+	case 1:
+		pipeconf_reg = PIPEBCONF;
+		break;
+	case 2:
+		pipeconf_reg = PIPECCONF;
+		break;
+	default:
+		DRM_ERROR("Illegal Pipe Number.\n");
+		return;
+	}
+
+	/* FIXME JLIU7_PO */
+	psb_intel_wait_for_vblank(dev);
+	return;
+
+	/* Wait for for the pipe enable to take effect. */
+	for (count = 0; count < COUNT_MAX; count++) {
+		temp = REG_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_PIPE_STATE) == 1)
+			break;
+	}
+}
+
+static void psb_intel_crtc_prepare(struct drm_crtc *crtc)
+{
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+static void psb_intel_crtc_commit(struct drm_crtc *crtc)
+{
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+static bool psb_intel_crtc_mode_fixup(struct drm_crtc *crtc,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+/**
+ * Return the pipe currently connected to the panel fitter,
+ * or -1 if the panel fitter is not present or not in use
+ */
+static int psb_intel_panel_fitter_pipe(struct drm_device *dev)
+{
+	u32 pfit_control;
+
+	pfit_control = REG_READ(PFIT_CONTROL);
+
+	/* See if the panel fitter is in use */
+	if ((pfit_control & PFIT_ENABLE) == 0)
+		return -1;
+
+	/* 965 can place panel fitter on either pipe */
+	return (pfit_control >> 29) & 0x3;
+}
+
+static struct drm_device globle_dev;
+
+void mdfld__intel_plane_set_alpha(int enable)
+{
+	struct drm_device *dev = &globle_dev;
+	int dspcntr_reg = DSPACNTR;
+	u32 dspcntr;
+
+	dspcntr = REG_READ(dspcntr_reg);
+
+	if (enable) {
+		dspcntr &= ~DISPPLANE_32BPP_NO_ALPHA;
+		dspcntr |= DISPPLANE_32BPP;
+	} else {
+		dspcntr &= ~DISPPLANE_32BPP;
+		dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+	}
+
+	REG_WRITE(dspcntr_reg, dspcntr);
+}
+
+static int check_fb(struct drm_framebuffer *fb)
+{
+	if (!fb)
+		return 0;
+
+	switch (fb->bits_per_pixel) {
+	case 8:
+	case 16:
+	case 24:
+	case 32:
+		return 0;
+	default:
+		DRM_ERROR("Unknown color depth\n");
+		return -EINVAL;
+	}
+}
+
+static int mdfld__intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
+				struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	/* struct drm_i915_master_private *master_priv; */
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
+	int pipe = psb_intel_crtc->pipe;
+	unsigned long start, offset;
+	int dsplinoff = DSPALINOFF;
+	int dspsurf = DSPASURF;
+	int dspstride = DSPASTRIDE;
+	int dspcntr_reg = DSPACNTR;
+	u32 dspcntr;
+	int ret;
+
+	memcpy(&globle_dev, dev, sizeof(struct drm_device));
+
+	dev_dbg(dev->dev, "pipe = 0x%x.\n", pipe);
+
+	/* no fb bound */
+	if (!crtc->fb) {
+		dev_dbg(dev->dev, "No FB bound\n");
+		return 0;
+	}
+
+	ret = check_fb(crtc->fb);
+	if (ret)
+		return ret;
+
+	switch (pipe) {
+	case 0:
+		dsplinoff = DSPALINOFF;
+		break;
+	case 1:
+		dsplinoff = DSPBLINOFF;
+		dspsurf = DSPBSURF;
+		dspstride = DSPBSTRIDE;
+		dspcntr_reg = DSPBCNTR;
+		break;
+	case 2:
+		dsplinoff = DSPCLINOFF;
+		dspsurf = DSPCSURF;
+		dspstride = DSPCSTRIDE;
+		dspcntr_reg = DSPCCNTR;
+		break;
+	default:
+		DRM_ERROR("Illegal Pipe Number.\n");
+		return -EINVAL;
+	}
+
+	if (!gma_power_begin(dev, true))
+		return 0;
+
+	start = psbfb->gtt->offset;
+	offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8);
+
+	REG_WRITE(dspstride, crtc->fb->pitches[0]);
+	dspcntr = REG_READ(dspcntr_reg);
+	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+
+	switch (crtc->fb->bits_per_pixel) {
+	case 8:
+		dspcntr |= DISPPLANE_8BPP;
+		break;
+	case 16:
+		if (crtc->fb->depth == 15)
+			dspcntr |= DISPPLANE_15_16BPP;
+		else
+			dspcntr |= DISPPLANE_16BPP;
+		break;
+	case 24:
+	case 32:
+		dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+		break;
+	}
+	REG_WRITE(dspcntr_reg, dspcntr);
+
+	dev_dbg(dev->dev, "Writing base %08lX %08lX %d %d\n",
+						start, offset, x, y);
+	REG_WRITE(dsplinoff, offset);
+	REG_READ(dsplinoff);
+	REG_WRITE(dspsurf, start);
+	REG_READ(dspsurf);
+
+	gma_power_end(dev);
+
+	return 0;
+}
+
+/*
+ * Disable the pipe, plane and pll.
+ *
+ */
+void mdfld_disable_crtc(struct drm_device *dev, int pipe)
+{
+	int dpll_reg = MRST_DPLL_A;
+	int dspcntr_reg = DSPACNTR;
+	int dspbase_reg = MRST_DSPABASE;
+	int pipeconf_reg = PIPEACONF;
+	u32 temp;
+
+	dev_dbg(dev->dev, "pipe = %d\n", pipe);
+
+
+	switch (pipe) {
+	case 0:
+		break;
+	case 1:
+		dpll_reg = MDFLD_DPLL_B;
+		dspcntr_reg = DSPBCNTR;
+		dspbase_reg = DSPBSURF;
+		pipeconf_reg = PIPEBCONF;
+		break;
+	case 2:
+		dpll_reg = MRST_DPLL_A;
+		dspcntr_reg = DSPCCNTR;
+		dspbase_reg = MDFLD_DSPCBASE;
+		pipeconf_reg = PIPECCONF;
+		break;
+	default:
+		DRM_ERROR("Illegal Pipe Number.\n");
+		return;
+	}
+
+	if (pipe != 1)
+		mdfld_dsi_gen_fifo_ready(dev, MIPI_GEN_FIFO_STAT_REG(pipe),
+				HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY);
+
+	/* Disable display plane */
+	temp = REG_READ(dspcntr_reg);
+	if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+		REG_WRITE(dspcntr_reg,
+			  temp & ~DISPLAY_PLANE_ENABLE);
+		/* Flush the plane changes */
+		REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+		REG_READ(dspbase_reg);
+	}
+
+	/* FIXME_JLIU7 MDFLD_PO revisit */
+
+	/* Next, disable display pipes */
+	temp = REG_READ(pipeconf_reg);
+	if ((temp & PIPEACONF_ENABLE) != 0) {
+		temp &= ~PIPEACONF_ENABLE;
+		temp |= PIPECONF_PLANE_OFF | PIPECONF_CURSOR_OFF;
+		REG_WRITE(pipeconf_reg, temp);
+		REG_READ(pipeconf_reg);
+
+		/* Wait for for the pipe disable to take effect. */
+		mdfldWaitForPipeDisable(dev, pipe);
+	}
+
+	temp = REG_READ(dpll_reg);
+	if (temp & DPLL_VCO_ENABLE) {
+		if ((pipe != 1 &&
+			!((REG_READ(PIPEACONF) | REG_READ(PIPECCONF))
+				& PIPEACONF_ENABLE)) || pipe == 1) {
+			temp &= ~(DPLL_VCO_ENABLE);
+			REG_WRITE(dpll_reg, temp);
+			REG_READ(dpll_reg);
+			/* Wait for the clocks to turn off. */
+			/* FIXME_MDFLD PO may need more delay */
+			udelay(500);
+
+			if (!(temp & MDFLD_PWR_GATE_EN)) {
+				/* gating power of DPLL */
+				REG_WRITE(dpll_reg, temp | MDFLD_PWR_GATE_EN);
+				/* FIXME_MDFLD PO - change 500 to 1 after PO */
+				udelay(5000);
+			}
+		}
+	}
+
+}
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ *
+ * This code should probably grow support for turning the cursor off and back
+ * on appropriately at the same time as we're turning the pipe off/on.
+ */
+static void mdfld_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int pipe = psb_intel_crtc->pipe;
+	int dpll_reg = MRST_DPLL_A;
+	int dspcntr_reg = DSPACNTR;
+	int dspbase_reg = MRST_DSPABASE;
+	int pipeconf_reg = PIPEACONF;
+	u32 pipestat_reg = PIPEASTAT;
+	u32 pipeconf = dev_priv->pipeconf[pipe];
+	u32 temp;
+	bool enabled;
+	int timeout = 0;
+
+	dev_dbg(dev->dev, "mode = %d, pipe = %d\n", mode, pipe);
+
+/* FIXME_JLIU7 MDFLD_PO replaced w/ the following function */
+/* mdfld_dbi_dpms (struct drm_device *dev, int pipe, bool enabled) */
+
+	switch (pipe) {
+	case 0:
+		break;
+	case 1:
+		dpll_reg = DPLL_B;
+		dspcntr_reg = DSPBCNTR;
+		dspbase_reg = MRST_DSPBBASE;
+		pipeconf_reg = PIPEBCONF;
+		dpll_reg = MDFLD_DPLL_B;
+		break;
+	case 2:
+		dpll_reg = MRST_DPLL_A;
+		dspcntr_reg = DSPCCNTR;
+		dspbase_reg = MDFLD_DSPCBASE;
+		pipeconf_reg = PIPECCONF;
+		pipestat_reg = PIPECSTAT;
+		break;
+	default:
+		DRM_ERROR("Illegal Pipe Number.\n");
+		return;
+	}
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	/* XXX: When our outputs are all unaware of DPMS modes other than off
+	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+	 */
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+		/* Enable the DPLL */
+		temp = REG_READ(dpll_reg);
+
+		if ((temp & DPLL_VCO_ENABLE) == 0) {
+			/* When ungating power of DPLL, needs to wait 0.5us
+			   before enable the VCO */
+			if (temp & MDFLD_PWR_GATE_EN) {
+				temp &= ~MDFLD_PWR_GATE_EN;
+				REG_WRITE(dpll_reg, temp);
+				/* FIXME_MDFLD PO - change 500 to 1 after PO */
+				udelay(500);
+			}
+
+			REG_WRITE(dpll_reg, temp);
+			REG_READ(dpll_reg);
+			/* FIXME_MDFLD PO - change 500 to 1 after PO */
+			udelay(500);
+
+			REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+			REG_READ(dpll_reg);
+
+			/**
+			 * wait for DSI PLL to lock
+			 * NOTE: only need to poll status of pipe 0 and pipe 1,
+			 * since both MIPI pipes share the same PLL.
+			 */
+			while ((pipe != 2) && (timeout < 20000) &&
+			  !(REG_READ(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) {
+				udelay(150);
+				timeout++;
+			}
+		}
+
+		/* Enable the plane */
+		temp = REG_READ(dspcntr_reg);
+		if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+			REG_WRITE(dspcntr_reg,
+				temp | DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+		}
+
+		/* Enable the pipe */
+		temp = REG_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_ENABLE) == 0) {
+			REG_WRITE(pipeconf_reg, pipeconf);
+
+			/* Wait for for the pipe enable to take effect. */
+			mdfldWaitForPipeEnable(dev, pipe);
+		}
+
+		/*workaround for sighting 3741701 Random X blank display*/
+		/*perform w/a in video mode only on pipe A or C*/
+		if (pipe == 0 || pipe == 2) {
+			REG_WRITE(pipestat_reg, REG_READ(pipestat_reg));
+			msleep(100);
+			if (PIPE_VBLANK_STATUS & REG_READ(pipestat_reg))
+				dev_dbg(dev->dev, "OK");
+			else {
+				dev_dbg(dev->dev, "STUCK!!!!");
+				/*shutdown controller*/
+				temp = REG_READ(dspcntr_reg);
+				REG_WRITE(dspcntr_reg,
+						temp & ~DISPLAY_PLANE_ENABLE);
+				REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+				/*mdfld_dsi_dpi_shut_down(dev, pipe);*/
+				REG_WRITE(0xb048, 1);
+				msleep(100);
+				temp = REG_READ(pipeconf_reg);
+				temp &= ~PIPEACONF_ENABLE;
+				REG_WRITE(pipeconf_reg, temp);
+				msleep(100); /*wait for pipe disable*/
+				REG_WRITE(MIPI_DEVICE_READY_REG(pipe), 0);
+				msleep(100);
+				REG_WRITE(0xb004, REG_READ(0xb004));
+				/* try to bring the controller back up again*/
+				REG_WRITE(MIPI_DEVICE_READY_REG(pipe), 1);
+				temp = REG_READ(dspcntr_reg);
+				REG_WRITE(dspcntr_reg,
+						temp | DISPLAY_PLANE_ENABLE);
+				REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+				/*mdfld_dsi_dpi_turn_on(dev, pipe);*/
+				REG_WRITE(0xb048, 2);
+				msleep(100);
+				temp = REG_READ(pipeconf_reg);
+				temp |= PIPEACONF_ENABLE;
+				REG_WRITE(pipeconf_reg, temp);
+			}
+		}
+
+		psb_intel_crtc_load_lut(crtc);
+
+		/* Give the overlay scaler a chance to enable
+		   if it's on this pipe */
+		/* psb_intel_crtc_dpms_video(crtc, true); TODO */
+
+		break;
+	case DRM_MODE_DPMS_OFF:
+		/* Give the overlay scaler a chance to disable
+		 * if it's on this pipe */
+		/* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
+		if (pipe != 1)
+			mdfld_dsi_gen_fifo_ready(dev,
+				MIPI_GEN_FIFO_STAT_REG(pipe),
+				HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY);
+
+		/* Disable the VGA plane that we never use */
+		REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+
+		/* Disable display plane */
+		temp = REG_READ(dspcntr_reg);
+		if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+			REG_WRITE(dspcntr_reg,
+				  temp & ~DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+			REG_READ(dspbase_reg);
+		}
+
+		/* Next, disable display pipes */
+		temp = REG_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_ENABLE) != 0) {
+			temp &= ~PIPEACONF_ENABLE;
+			temp |= PIPECONF_PLANE_OFF | PIPECONF_CURSOR_OFF;
+			REG_WRITE(pipeconf_reg, temp);
+			REG_READ(pipeconf_reg);
+
+			/* Wait for for the pipe disable to take effect. */
+			mdfldWaitForPipeDisable(dev, pipe);
+		}
+
+		temp = REG_READ(dpll_reg);
+		if (temp & DPLL_VCO_ENABLE) {
+			if ((pipe != 1 && !((REG_READ(PIPEACONF)
+				| REG_READ(PIPECCONF)) & PIPEACONF_ENABLE))
+					|| pipe == 1) {
+				temp &= ~(DPLL_VCO_ENABLE);
+				REG_WRITE(dpll_reg, temp);
+				REG_READ(dpll_reg);
+				/* Wait for the clocks to turn off. */
+				/* FIXME_MDFLD PO may need more delay */
+				udelay(500);
+			}
+		}
+		break;
+	}
+	enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
+	gma_power_end(dev);
+}
+
+
+#define MDFLD_LIMT_DPLL_19	    0
+#define MDFLD_LIMT_DPLL_25	    1
+#define MDFLD_LIMT_DPLL_83	    2
+#define MDFLD_LIMT_DPLL_100	    3
+#define MDFLD_LIMT_DSIPLL_19	    4
+#define MDFLD_LIMT_DSIPLL_25	    5
+#define MDFLD_LIMT_DSIPLL_83	    6
+#define MDFLD_LIMT_DSIPLL_100	    7
+
+#define MDFLD_DOT_MIN		  19750
+#define MDFLD_DOT_MAX		  120000
+#define MDFLD_DPLL_M_MIN_19	    113
+#define MDFLD_DPLL_M_MAX_19	    155
+#define MDFLD_DPLL_P1_MIN_19	    2
+#define MDFLD_DPLL_P1_MAX_19	    10
+#define MDFLD_DPLL_M_MIN_25	    101
+#define MDFLD_DPLL_M_MAX_25	    130
+#define MDFLD_DPLL_P1_MIN_25	    2
+#define MDFLD_DPLL_P1_MAX_25	    10
+#define MDFLD_DPLL_M_MIN_83	    64
+#define MDFLD_DPLL_M_MAX_83	    64
+#define MDFLD_DPLL_P1_MIN_83	    2
+#define MDFLD_DPLL_P1_MAX_83	    2
+#define MDFLD_DPLL_M_MIN_100	    64
+#define MDFLD_DPLL_M_MAX_100	    64
+#define MDFLD_DPLL_P1_MIN_100	    2
+#define MDFLD_DPLL_P1_MAX_100	    2
+#define MDFLD_DSIPLL_M_MIN_19	    131
+#define MDFLD_DSIPLL_M_MAX_19	    175
+#define MDFLD_DSIPLL_P1_MIN_19	    3
+#define MDFLD_DSIPLL_P1_MAX_19	    8
+#define MDFLD_DSIPLL_M_MIN_25	    97
+#define MDFLD_DSIPLL_M_MAX_25	    140
+#define MDFLD_DSIPLL_P1_MIN_25	    3
+#define MDFLD_DSIPLL_P1_MAX_25	    9
+#define MDFLD_DSIPLL_M_MIN_83	    33
+#define MDFLD_DSIPLL_M_MAX_83	    92
+#define MDFLD_DSIPLL_P1_MIN_83	    2
+#define MDFLD_DSIPLL_P1_MAX_83	    3
+#define MDFLD_DSIPLL_M_MIN_100	    97
+#define MDFLD_DSIPLL_M_MAX_100	    140
+#define MDFLD_DSIPLL_P1_MIN_100	    3
+#define MDFLD_DSIPLL_P1_MAX_100	    9
+
+static const struct mrst_limit_t mdfld_limits[] = {
+	{			/* MDFLD_LIMT_DPLL_19 */
+	 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
+	 .m = {.min = MDFLD_DPLL_M_MIN_19, .max = MDFLD_DPLL_M_MAX_19},
+	 .p1 = {.min = MDFLD_DPLL_P1_MIN_19, .max = MDFLD_DPLL_P1_MAX_19},
+	 },
+	{			/* MDFLD_LIMT_DPLL_25 */
+	 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
+	 .m = {.min = MDFLD_DPLL_M_MIN_25, .max = MDFLD_DPLL_M_MAX_25},
+	 .p1 = {.min = MDFLD_DPLL_P1_MIN_25, .max = MDFLD_DPLL_P1_MAX_25},
+	 },
+	{			/* MDFLD_LIMT_DPLL_83 */
+	 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
+	 .m = {.min = MDFLD_DPLL_M_MIN_83, .max = MDFLD_DPLL_M_MAX_83},
+	 .p1 = {.min = MDFLD_DPLL_P1_MIN_83, .max = MDFLD_DPLL_P1_MAX_83},
+	 },
+	{			/* MDFLD_LIMT_DPLL_100 */
+	 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
+	 .m = {.min = MDFLD_DPLL_M_MIN_100, .max = MDFLD_DPLL_M_MAX_100},
+	 .p1 = {.min = MDFLD_DPLL_P1_MIN_100, .max = MDFLD_DPLL_P1_MAX_100},
+	 },
+	{			/* MDFLD_LIMT_DSIPLL_19 */
+	 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
+	 .m = {.min = MDFLD_DSIPLL_M_MIN_19, .max = MDFLD_DSIPLL_M_MAX_19},
+	 .p1 = {.min = MDFLD_DSIPLL_P1_MIN_19, .max = MDFLD_DSIPLL_P1_MAX_19},
+	 },
+	{			/* MDFLD_LIMT_DSIPLL_25 */
+	 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
+	 .m = {.min = MDFLD_DSIPLL_M_MIN_25, .max = MDFLD_DSIPLL_M_MAX_25},
+	 .p1 = {.min = MDFLD_DSIPLL_P1_MIN_25, .max = MDFLD_DSIPLL_P1_MAX_25},
+	 },
+	{			/* MDFLD_LIMT_DSIPLL_83 */
+	 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
+	 .m = {.min = MDFLD_DSIPLL_M_MIN_83, .max = MDFLD_DSIPLL_M_MAX_83},
+	 .p1 = {.min = MDFLD_DSIPLL_P1_MIN_83, .max = MDFLD_DSIPLL_P1_MAX_83},
+	 },
+	{			/* MDFLD_LIMT_DSIPLL_100 */
+	 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
+	 .m = {.min = MDFLD_DSIPLL_M_MIN_100, .max = MDFLD_DSIPLL_M_MAX_100},
+	 .p1 = {.min = MDFLD_DSIPLL_P1_MIN_100, .max = MDFLD_DSIPLL_P1_MAX_100},
+	 },
+};
+
+#define MDFLD_M_MIN	    21
+#define MDFLD_M_MAX	    180
+static const u32 mdfld_m_converts[] = {
+/* M configuration table from 9-bit LFSR table */
+	224, 368, 440, 220, 366, 439, 219, 365, 182, 347, /* 21 - 30 */
+	173, 342, 171, 85, 298, 149, 74, 37, 18, 265,   /* 31 - 40 */
+	388, 194, 353, 432, 216, 108, 310, 155, 333, 166, /* 41 - 50 */
+	83, 41, 276, 138, 325, 162, 337, 168, 340, 170, /* 51 - 60 */
+	341, 426, 469, 234, 373, 442, 221, 110, 311, 411, /* 61 - 70 */
+	461, 486, 243, 377, 188, 350, 175, 343, 427, 213, /* 71 - 80 */
+	106, 53, 282, 397, 354, 227, 113, 56, 284, 142, /* 81 - 90 */
+	71, 35, 273, 136, 324, 418, 465, 488, 500, 506, /* 91 - 100 */
+	253, 126, 63, 287, 399, 455, 483, 241, 376, 444, /* 101 - 110 */
+	478, 495, 503, 251, 381, 446, 479, 239, 375, 443, /* 111 - 120 */
+	477, 238, 119, 315, 157, 78, 295, 147, 329, 420, /* 121 - 130 */
+	210, 105, 308, 154, 77, 38, 275, 137, 68, 290, /* 131 - 140 */
+	145, 328, 164, 82, 297, 404, 458, 485, 498, 249, /* 141 - 150 */
+	380, 190, 351, 431, 471, 235, 117, 314, 413, 206, /* 151 - 160 */
+	103, 51, 25, 12, 262, 387, 193, 96, 48, 280, /* 161 - 170 */
+	396, 198, 99, 305, 152, 76, 294, 403, 457, 228, /* 171 - 180 */
+};
+
+static const struct mrst_limit_t *mdfld_limit(struct drm_crtc *crtc)
+{
+	const struct mrst_limit_t *limit = NULL;
+	struct drm_device *dev = crtc->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)
+	    || psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_MIPI2)) {
+		if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19))
+			limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_19];
+		else if (ksel == KSEL_BYPASS_25)
+			limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_25];
+		else if ((ksel == KSEL_BYPASS_83_100) &&
+				(dev_priv->core_freq == 166))
+			limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_83];
+		else if ((ksel == KSEL_BYPASS_83_100) &&
+			 (dev_priv->core_freq == 100 ||
+				dev_priv->core_freq == 200))
+			limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_100];
+	} else if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
+		if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19))
+			limit = &mdfld_limits[MDFLD_LIMT_DPLL_19];
+		else if (ksel == KSEL_BYPASS_25)
+			limit = &mdfld_limits[MDFLD_LIMT_DPLL_25];
+		else if ((ksel == KSEL_BYPASS_83_100) &&
+				(dev_priv->core_freq == 166))
+			limit = &mdfld_limits[MDFLD_LIMT_DPLL_83];
+		else if ((ksel == KSEL_BYPASS_83_100) &&
+				 (dev_priv->core_freq == 100 ||
+				 dev_priv->core_freq == 200))
+			limit = &mdfld_limits[MDFLD_LIMT_DPLL_100];
+	} else {
+		limit = NULL;
+		dev_dbg(dev->dev, "mdfld_limit Wrong display type.\n");
+	}
+
+	return limit;
+}
+
+/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
+static void mdfld_clock(int refclk, struct mrst_clock_t *clock)
+{
+	clock->dot = (refclk * clock->m) / clock->p1;
+}
+
+/**
+ * Returns a set of divisors for the desired target clock with the given refclk,
+ * or FALSE.  Divisor values are the actual divisors for
+ */
+static bool
+mdfldFindBestPLL(struct drm_crtc *crtc, int target, int refclk,
+		struct mrst_clock_t *best_clock)
+{
+	struct mrst_clock_t clock;
+	const struct mrst_limit_t *limit = mdfld_limit(crtc);
+	int err = target;
+
+	memset(best_clock, 0, sizeof(*best_clock));
+
+	for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
+		for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max;
+		     clock.p1++) {
+			int this_err;
+
+			mdfld_clock(refclk, &clock);
+
+			this_err = abs(clock.dot - target);
+			if (this_err < err) {
+				*best_clock = clock;
+				err = this_err;
+			}
+		}
+	}
+	return err != target;
+}
+
+static int mdfld_crtc_mode_set(struct drm_crtc *crtc,
+			      struct drm_display_mode *mode,
+			      struct drm_display_mode *adjusted_mode,
+			      int x, int y,
+			      struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int pipe = psb_intel_crtc->pipe;
+	int fp_reg = MRST_FPA0;
+	int dpll_reg = MRST_DPLL_A;
+	int dspcntr_reg = DSPACNTR;
+	int pipeconf_reg = PIPEACONF;
+	int htot_reg = HTOTAL_A;
+	int hblank_reg = HBLANK_A;
+	int hsync_reg = HSYNC_A;
+	int vtot_reg = VTOTAL_A;
+	int vblank_reg = VBLANK_A;
+	int vsync_reg = VSYNC_A;
+	int dspsize_reg = DSPASIZE;
+	int dsppos_reg = DSPAPOS;
+	int pipesrc_reg = PIPEASRC;
+	u32 *pipeconf = &dev_priv->pipeconf[pipe];
+	u32 *dspcntr = &dev_priv->dspcntr[pipe];
+	int refclk = 0;
+	int clk_n = 0, clk_p2 = 0, clk_byte = 1, clk = 0, m_conv = 0,
+								clk_tmp = 0;
+	struct mrst_clock_t clock;
+	bool ok;
+	u32 dpll = 0, fp = 0;
+	bool is_crt = false, is_lvds = false, is_tv = false;
+	bool is_mipi = false, is_mipi2 = false, is_hdmi = false;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct psb_intel_encoder *psb_intel_encoder = NULL;
+	uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN;
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+	int timeout = 0;
+	int ret;
+
+	dev_dbg(dev->dev, "pipe = 0x%x\n", pipe);
+
+#if 0
+	if (pipe == 1) {
+		if (!gma_power_begin(dev, true))
+			return 0;
+		android_hdmi_crtc_mode_set(crtc, mode, adjusted_mode,
+			x, y, old_fb);
+		goto mrst_crtc_mode_set_exit;
+	}
+#endif
+
+	switch (pipe) {
+	case 0:
+		break;
+	case 1:
+		fp_reg = FPB0;
+		dpll_reg = DPLL_B;
+		dspcntr_reg = DSPBCNTR;
+		pipeconf_reg = PIPEBCONF;
+		htot_reg = HTOTAL_B;
+		hblank_reg = HBLANK_B;
+		hsync_reg = HSYNC_B;
+		vtot_reg = VTOTAL_B;
+		vblank_reg = VBLANK_B;
+		vsync_reg = VSYNC_B;
+		dspsize_reg = DSPBSIZE;
+		dsppos_reg = DSPBPOS;
+		pipesrc_reg = PIPEBSRC;
+		fp_reg = MDFLD_DPLL_DIV0;
+		dpll_reg = MDFLD_DPLL_B;
+		break;
+	case 2:
+		dpll_reg = MRST_DPLL_A;
+		dspcntr_reg = DSPCCNTR;
+		pipeconf_reg = PIPECCONF;
+		htot_reg = HTOTAL_C;
+		hblank_reg = HBLANK_C;
+		hsync_reg = HSYNC_C;
+		vtot_reg = VTOTAL_C;
+		vblank_reg = VBLANK_C;
+		vsync_reg = VSYNC_C;
+		dspsize_reg = DSPCSIZE;
+		dsppos_reg = DSPCPOS;
+		pipesrc_reg = PIPECSRC;
+		break;
+	default:
+		DRM_ERROR("Illegal Pipe Number.\n");
+		return 0;
+	}
+
+	ret = check_fb(crtc->fb);
+	if (ret)
+		return ret;
+
+	dev_dbg(dev->dev, "adjusted_hdisplay = %d\n",
+		 adjusted_mode->hdisplay);
+	dev_dbg(dev->dev, "adjusted_vdisplay = %d\n",
+		 adjusted_mode->vdisplay);
+	dev_dbg(dev->dev, "adjusted_hsync_start = %d\n",
+		 adjusted_mode->hsync_start);
+	dev_dbg(dev->dev, "adjusted_hsync_end = %d\n",
+		 adjusted_mode->hsync_end);
+	dev_dbg(dev->dev, "adjusted_htotal = %d\n",
+		 adjusted_mode->htotal);
+	dev_dbg(dev->dev, "adjusted_vsync_start = %d\n",
+		 adjusted_mode->vsync_start);
+	dev_dbg(dev->dev, "adjusted_vsync_end = %d\n",
+		 adjusted_mode->vsync_end);
+	dev_dbg(dev->dev, "adjusted_vtotal = %d\n",
+		 adjusted_mode->vtotal);
+	dev_dbg(dev->dev, "adjusted_clock = %d\n",
+		 adjusted_mode->clock);
+	dev_dbg(dev->dev, "hdisplay = %d\n",
+		 mode->hdisplay);
+	dev_dbg(dev->dev, "vdisplay = %d\n",
+		 mode->vdisplay);
+
+	if (!gma_power_begin(dev, true))
+		return 0;
+
+	memcpy(&psb_intel_crtc->saved_mode, mode,
+					sizeof(struct drm_display_mode));
+	memcpy(&psb_intel_crtc->saved_adjusted_mode, adjusted_mode,
+					sizeof(struct drm_display_mode));
+
+	list_for_each_entry(connector, &mode_config->connector_list, head) {
+		if (!connector)
+			continue;
+
+		encoder = connector->encoder;
+
+		if (!encoder)
+			continue;
+
+		if (encoder->crtc != crtc)
+			continue;
+
+		psb_intel_encoder = psb_intel_attached_encoder(connector);
+
+		switch (psb_intel_encoder->type) {
+		case INTEL_OUTPUT_LVDS:
+			is_lvds = true;
+			break;
+		case INTEL_OUTPUT_TVOUT:
+			is_tv = true;
+			break;
+		case INTEL_OUTPUT_ANALOG:
+			is_crt = true;
+			break;
+		case INTEL_OUTPUT_MIPI:
+			is_mipi = true;
+			break;
+		case INTEL_OUTPUT_MIPI2:
+			is_mipi2 = true;
+			break;
+		case INTEL_OUTPUT_HDMI:
+			is_hdmi = true;
+			break;
+		}
+	}
+
+	/* Disable the VGA plane that we never use */
+	REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+
+	/* Disable the panel fitter if it was on our pipe */
+	if (psb_intel_panel_fitter_pipe(dev) == pipe)
+		REG_WRITE(PFIT_CONTROL, 0);
+
+	/* pipesrc and dspsize control the size that is scaled from,
+	 * which should always be the user's requested size.
+	 */
+	if (pipe == 1) {
+		/* FIXME: To make HDMI display with 864x480 (TPO), 480x864
+		 * (PYR) or 480x854 (TMD), set the sprite width/height and
+		 * souce image size registers with the adjusted mode for
+		 * pipe B.
+		 */
+
+		/*
+		 * The defined sprite rectangle must always be completely
+		 * contained within the displayable area of the screen image
+		 * (frame buffer).
+		 */
+		REG_WRITE(dspsize_reg, ((min(mode->crtc_vdisplay, adjusted_mode->crtc_vdisplay) - 1) << 16)
+				| (min(mode->crtc_hdisplay, adjusted_mode->crtc_hdisplay) - 1));
+		/* Set the CRTC with encoder mode. */
+		REG_WRITE(pipesrc_reg, ((mode->crtc_hdisplay - 1) << 16)
+				 | (mode->crtc_vdisplay - 1));
+	} else {
+		REG_WRITE(dspsize_reg,
+				((mode->crtc_vdisplay - 1) << 16) |
+						(mode->crtc_hdisplay - 1));
+		REG_WRITE(pipesrc_reg,
+				((mode->crtc_hdisplay - 1) << 16) |
+						(mode->crtc_vdisplay - 1));
+	}
+
+	REG_WRITE(dsppos_reg, 0);
+
+	if (psb_intel_encoder)
+		drm_connector_property_get_value(connector,
+			dev->mode_config.scaling_mode_property, &scalingType);
+
+	if (scalingType == DRM_MODE_SCALE_NO_SCALE) {
+		/* Medfield doesn't have register support for centering so we
+		 * need to mess with the h/vblank and h/vsync start and ends
+		 * to get centering
+		 */
+		int offsetX = 0, offsetY = 0;
+
+		offsetX = (adjusted_mode->crtc_hdisplay -
+					mode->crtc_hdisplay) / 2;
+		offsetY = (adjusted_mode->crtc_vdisplay -
+					mode->crtc_vdisplay) / 2;
+
+		REG_WRITE(htot_reg, (mode->crtc_hdisplay - 1) |
+			((adjusted_mode->crtc_htotal - 1) << 16));
+		REG_WRITE(vtot_reg, (mode->crtc_vdisplay - 1) |
+			((adjusted_mode->crtc_vtotal - 1) << 16));
+		REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start -
+								offsetX - 1) |
+			((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16));
+		REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start -
+								offsetX - 1) |
+			((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16));
+		REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start -
+								offsetY - 1) |
+			((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16));
+		REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start -
+								offsetY - 1) |
+			((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16));
+	} else {
+		REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
+			((adjusted_mode->crtc_htotal - 1) << 16));
+		REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
+			((adjusted_mode->crtc_vtotal - 1) << 16));
+		REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
+			((adjusted_mode->crtc_hblank_end - 1) << 16));
+		REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
+			((adjusted_mode->crtc_hsync_end - 1) << 16));
+		REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
+			((adjusted_mode->crtc_vblank_end - 1) << 16));
+		REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
+			((adjusted_mode->crtc_vsync_end - 1) << 16));
+	}
+
+	/* Flush the plane changes */
+	{
+		struct drm_crtc_helper_funcs *crtc_funcs =
+		    crtc->helper_private;
+		crtc_funcs->mode_set_base(crtc, x, y, old_fb);
+	}
+
+	/* setup pipeconf */
+	*pipeconf = PIPEACONF_ENABLE; /* FIXME_JLIU7 REG_READ(pipeconf_reg); */
+
+	/* Set up the display plane register */
+	*dspcntr = REG_READ(dspcntr_reg);
+	*dspcntr |= pipe << DISPPLANE_SEL_PIPE_POS;
+	*dspcntr |= DISPLAY_PLANE_ENABLE;
+
+	if (is_mipi2)
+		goto mrst_crtc_mode_set_exit;
+	clk = adjusted_mode->clock;
+
+	if (is_hdmi) {
+		if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19)) {
+			refclk = 19200;
+
+			if (is_mipi || is_mipi2)
+				clk_n = 1, clk_p2 = 8;
+			else if (is_hdmi)
+				clk_n = 1, clk_p2 = 10;
+		} else if (ksel == KSEL_BYPASS_25) {
+			refclk = 25000;
+
+			if (is_mipi || is_mipi2)
+				clk_n = 1, clk_p2 = 8;
+			else if (is_hdmi)
+				clk_n = 1, clk_p2 = 10;
+		} else if ((ksel == KSEL_BYPASS_83_100) &&
+					dev_priv->core_freq == 166) {
+			refclk = 83000;
+
+			if (is_mipi || is_mipi2)
+				clk_n = 4, clk_p2 = 8;
+			else if (is_hdmi)
+				clk_n = 4, clk_p2 = 10;
+		} else if ((ksel == KSEL_BYPASS_83_100) &&
+					(dev_priv->core_freq == 100 ||
+					dev_priv->core_freq == 200)) {
+			refclk = 100000;
+			if (is_mipi || is_mipi2)
+				clk_n = 4, clk_p2 = 8;
+			else if (is_hdmi)
+				clk_n = 4, clk_p2 = 10;
+		}
+
+		if (is_mipi)
+			clk_byte = dev_priv->bpp / 8;
+		else if (is_mipi2)
+			clk_byte = dev_priv->bpp2 / 8;
+
+		clk_tmp = clk * clk_n * clk_p2 * clk_byte;
+
+		dev_dbg(dev->dev, "clk = %d, clk_n = %d, clk_p2 = %d.\n",
+					clk, clk_n, clk_p2);
+		dev_dbg(dev->dev, "adjusted_mode->clock = %d, clk_tmp = %d.\n",
+					adjusted_mode->clock, clk_tmp);
+
+		ok = mdfldFindBestPLL(crtc, clk_tmp, refclk, &clock);
+
+		if (!ok) {
+			DRM_ERROR
+			    ("mdfldFindBestPLL fail in mdfld_crtc_mode_set.\n");
+		} else {
+			m_conv = mdfld_m_converts[(clock.m - MDFLD_M_MIN)];
+
+			dev_dbg(dev->dev, "dot clock = %d,"
+				 "m = %d, p1 = %d, m_conv = %d.\n",
+					clock.dot, clock.m,
+					clock.p1, m_conv);
+		}
+
+		dpll = REG_READ(dpll_reg);
+
+		if (dpll & DPLL_VCO_ENABLE) {
+			dpll &= ~DPLL_VCO_ENABLE;
+			REG_WRITE(dpll_reg, dpll);
+			REG_READ(dpll_reg);
+
+			/* FIXME jliu7 check the DPLL lock bit PIPEACONF[29] */
+			/* FIXME_MDFLD PO - change 500 to 1 after PO */
+			udelay(500);
+
+			/* reset M1, N1 & P1 */
+			REG_WRITE(fp_reg, 0);
+			dpll &= ~MDFLD_P1_MASK;
+			REG_WRITE(dpll_reg, dpll);
+			/* FIXME_MDFLD PO - change 500 to 1 after PO */
+			udelay(500);
+		}
+
+		/* When ungating power of DPLL, needs to wait 0.5us before
+		 * enable the VCO */
+		if (dpll & MDFLD_PWR_GATE_EN) {
+			dpll &= ~MDFLD_PWR_GATE_EN;
+			REG_WRITE(dpll_reg, dpll);
+			/* FIXME_MDFLD PO - change 500 to 1 after PO */
+			udelay(500);
+		}
+		dpll = 0;
+
+#if 0 /* FIXME revisit later */
+		if (ksel == KSEL_CRYSTAL_19 || ksel == KSEL_BYPASS_19 ||
+						ksel == KSEL_BYPASS_25)
+			dpll &= ~MDFLD_INPUT_REF_SEL;
+		else if (ksel == KSEL_BYPASS_83_100)
+			dpll |= MDFLD_INPUT_REF_SEL;
+#endif /* FIXME revisit later */
+
+		if (is_hdmi)
+			dpll |= MDFLD_VCO_SEL;
+
+		fp = (clk_n / 2) << 16;
+		fp |= m_conv;
+
+		/* compute bitmask from p1 value */
+		dpll |= (1 << (clock.p1 - 2)) << 17;
+
+#if 0 /* 1080p30 & 720p */
+		dpll = 0x00050000;
+		fp = 0x000001be;
+#endif
+#if 0 /* 480p */
+		dpll = 0x02010000;
+		fp = 0x000000d2;
+#endif
+	} else {
+#if 0 /*DBI_TPO_480x864*/
+		dpll = 0x00020000;
+		fp = 0x00000156;
+#endif /* DBI_TPO_480x864 */ /* get from spec. */
+
+		dpll = 0x00800000;
+		fp = 0x000000c1;
+	}
+
+	REG_WRITE(fp_reg, fp);
+	REG_WRITE(dpll_reg, dpll);
+	/* FIXME_MDFLD PO - change 500 to 1 after PO */
+	udelay(500);
+
+	dpll |= DPLL_VCO_ENABLE;
+	REG_WRITE(dpll_reg, dpll);
+	REG_READ(dpll_reg);
+
+	/* wait for DSI PLL to lock */
+	while (timeout < 20000 &&
+			!(REG_READ(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) {
+		udelay(150);
+		timeout++;
+	}
+
+	if (is_mipi)
+		goto mrst_crtc_mode_set_exit;
+
+	dev_dbg(dev->dev, "is_mipi = 0x%x\n", is_mipi);
+
+	REG_WRITE(pipeconf_reg, *pipeconf);
+	REG_READ(pipeconf_reg);
+
+	/* Wait for for the pipe enable to take effect. */
+	REG_WRITE(dspcntr_reg, *dspcntr);
+	psb_intel_wait_for_vblank(dev);
+
+mrst_crtc_mode_set_exit:
+
+	gma_power_end(dev);
+
+	return 0;
+}
+
+const struct drm_crtc_helper_funcs mdfld_helper_funcs = {
+	.dpms = mdfld_crtc_dpms,
+	.mode_fixup = psb_intel_crtc_mode_fixup,
+	.mode_set = mdfld_crtc_mode_set,
+	.mode_set_base = mdfld__intel_pipe_set_base,
+	.prepare = psb_intel_crtc_prepare,
+	.commit = psb_intel_crtc_commit,
+};
+