diff --git a/Documentation/Changes b/Documentation/Changes
index ec97b77..22797a1 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -1,8 +1,13 @@
+.. _changes:
+
+Minimal requerements to compile the Kernel
+++++++++++++++++++++++++++++++++++++++++++
+
 Intro
 =====
 
 This document is designed to provide a list of the minimum levels of
-software necessary to run the 3.0 kernels.
+software necessary to run the 4.x kernels.
 
 This document is originally based on my "Changes" file for 2.0.x kernels
 and therefore owes credit to the same people as that file (Jared Mauch,
@@ -10,9 +15,9 @@
 'net).
 
 Current Minimal Requirements
-============================
+****************************
 
-Upgrade to at *least* these software revisions before thinking you've
+Upgrade to at **least** these software revisions before thinking you've
 encountered a bug!  If you're unsure what version you're currently
 running, the suggested command should tell you.
 
@@ -21,34 +26,40 @@
 systems; obviously, if you don't have any ISDN hardware, for example,
 you probably needn't concern yourself with isdn4k-utils.
 
-o  GNU C                  3.2                     # gcc --version
-o  GNU make               3.80                    # make --version
-o  binutils               2.12                    # ld -v
-o  util-linux             2.10o                   # fdformat --version
-o  module-init-tools      0.9.10                  # depmod -V
-o  e2fsprogs              1.41.4                  # e2fsck -V
-o  jfsutils               1.1.3                   # fsck.jfs -V
-o  reiserfsprogs          3.6.3                   # reiserfsck -V
-o  xfsprogs               2.6.0                   # xfs_db -V
-o  squashfs-tools         4.0                     # mksquashfs -version
-o  btrfs-progs            0.18                    # btrfsck
-o  pcmciautils            004                     # pccardctl -V
-o  quota-tools            3.09                    # quota -V
-o  PPP                    2.4.0                   # pppd --version
-o  isdn4k-utils           3.1pre1                 # isdnctrl 2>&1|grep version
-o  nfs-utils              1.0.5                   # showmount --version
-o  procps                 3.2.0                   # ps --version
-o  oprofile               0.9                     # oprofiled --version
-o  udev                   081                     # udevd --version
-o  grub                   0.93                    # grub --version || grub-install --version
-o  mcelog                 0.6                     # mcelog --version
-o  iptables               1.4.2                   # iptables -V
-o  openssl & libcrypto    1.0.0                   # openssl version
-o  bc                     1.06.95                 # bc --version
+====================== ===============  ========================================
+        Program        Minimal version       Command to check the version
+====================== ===============  ========================================
+GNU C                  3.2              gcc --version
+GNU make               3.80             make --version
+binutils               2.12             ld -v
+util-linux             2.10o            fdformat --version
+module-init-tools      0.9.10           depmod -V
+e2fsprogs              1.41.4           e2fsck -V
+jfsutils               1.1.3            fsck.jfs -V
+reiserfsprogs          3.6.3            reiserfsck -V
+xfsprogs               2.6.0            xfs_db -V
+squashfs-tools         4.0              mksquashfs -version
+btrfs-progs            0.18             btrfsck
+pcmciautils            004              pccardctl -V
+quota-tools            3.09             quota -V
+PPP                    2.4.0            pppd --version
+isdn4k-utils           3.1pre1          isdnctrl 2>&1|grep version
+nfs-utils              1.0.5            showmount --version
+procps                 3.2.0            ps --version
+oprofile               0.9              oprofiled --version
+udev                   081              udevd --version
+grub                   0.93             grub --version || grub-install --version
+mcelog                 0.6              mcelog --version
+iptables               1.4.2            iptables -V
+openssl & libcrypto    1.0.0            openssl version
+bc                     1.06.95          bc --version
+Sphinx\ [#f1]_	       1.2		sphinx-build --version
+====================== ===============  ========================================
 
+.. [#f1] Sphinx is needed only to build the Kernel documentation
 
 Kernel compilation
-==================
+******************
 
 GCC
 ---
@@ -64,16 +75,16 @@
 Binutils
 --------
 
-Linux on IA-32 has recently switched from using as86 to using gas for
-assembling the 16-bit boot code, removing the need for as86 to compile
+Linux on IA-32 has recently switched from using ``as86`` to using ``gas`` for
+assembling the 16-bit boot code, removing the need for ``as86`` to compile
 your kernel.  This change does, however, mean that you need a recent
 release of binutils.
 
 Perl
 ----
 
-You will need perl 5 and the following modules: Getopt::Long, Getopt::Std,
-File::Basename, and File::Find to build the kernel.
+You will need perl 5 and the following modules: ``Getopt::Long``,
+``Getopt::Std``, ``File::Basename``, and ``File::Find`` to build the kernel.
 
 BC
 --
@@ -93,7 +104,7 @@
 
 
 System utilities
-================
+****************
 
 Architectural changes
 ---------------------
@@ -115,7 +126,7 @@
 Util-linux
 ----------
 
-New versions of util-linux provide *fdisk support for larger disks,
+New versions of util-linux provide ``fdisk`` support for larger disks,
 support new options to mount, recognize more supported partition
 types, have a fdformat which works with 2.4 kernels, and similar goodies.
 You'll probably want to upgrade.
@@ -125,54 +136,57 @@
 
 If the unthinkable happens and your kernel oopses, you may need the
 ksymoops tool to decode it, but in most cases you don't.
-It is generally preferred to build the kernel with CONFIG_KALLSYMS so
+It is generally preferred to build the kernel with ``CONFIG_KALLSYMS`` so
 that it produces readable dumps that can be used as-is (this also
 produces better output than ksymoops).  If for some reason your kernel
-is not build with CONFIG_KALLSYMS and you have no way to rebuild and
+is not build with ``CONFIG_KALLSYMS`` and you have no way to rebuild and
 reproduce the Oops with that option, then you can still decode that Oops
 with ksymoops.
 
 Module-Init-Tools
 -----------------
 
-A new module loader is now in the kernel that requires module-init-tools
+A new module loader is now in the kernel that requires ``module-init-tools``
 to use.  It is backward compatible with the 2.4.x series kernels.
 
 Mkinitrd
 --------
 
-These changes to the /lib/modules file tree layout also require that
+These changes to the ``/lib/modules`` file tree layout also require that
 mkinitrd be upgraded.
 
 E2fsprogs
 ---------
 
-The latest version of e2fsprogs fixes several bugs in fsck and
+The latest version of ``e2fsprogs`` fixes several bugs in fsck and
 debugfs.  Obviously, it's a good idea to upgrade.
 
 JFSutils
 --------
 
-The jfsutils package contains the utilities for the file system.
+The ``jfsutils`` package contains the utilities for the file system.
 The following utilities are available:
-o fsck.jfs - initiate replay of the transaction log, and check
+
+- ``fsck.jfs`` - initiate replay of the transaction log, and check
   and repair a JFS formatted partition.
-o mkfs.jfs - create a JFS formatted partition.
-o other file system utilities are also available in this package.
+
+- ``mkfs.jfs`` - create a JFS formatted partition.
+
+- other file system utilities are also available in this package.
 
 Reiserfsprogs
 -------------
 
 The reiserfsprogs package should be used for reiserfs-3.6.x
 (Linux kernels 2.4.x). It is a combined package and contains working
-versions of mkreiserfs, resize_reiserfs, debugreiserfs and
-reiserfsck. These utils work on both i386 and alpha platforms.
+versions of ``mkreiserfs``, ``resize_reiserfs``, ``debugreiserfs`` and
+``reiserfsck``. These utils work on both i386 and alpha platforms.
 
 Xfsprogs
 --------
 
-The latest version of xfsprogs contains mkfs.xfs, xfs_db, and the
-xfs_repair utilities, among others, for the XFS filesystem.  It is
+The latest version of ``xfsprogs`` contains ``mkfs.xfs``, ``xfs_db``, and the
+``xfs_repair`` utilities, among others, for the XFS filesystem.  It is
 architecture independent and any version from 2.0.0 onward should
 work correctly with this version of the XFS kernel code (2.6.0 or
 later is recommended, due to some significant improvements).
@@ -180,7 +194,7 @@
 PCMCIAutils
 -----------
 
-PCMCIAutils replaces pcmcia-cs. It properly sets up
+PCMCIAutils replaces ``pcmcia-cs``. It properly sets up
 PCMCIA sockets at system startup and loads the appropriate modules
 for 16-bit PCMCIA devices if the kernel is modularized and the hotplug
 subsystem is used.
@@ -198,19 +212,20 @@
 
 A driver has been added to allow updating of Intel IA32 microcode,
 accessible as a normal (misc) character device.  If you are not using
-udev you may need to:
+udev you may need to::
 
-mkdir /dev/cpu
-mknod /dev/cpu/microcode c 10 184
-chmod 0644 /dev/cpu/microcode
+  mkdir /dev/cpu
+  mknod /dev/cpu/microcode c 10 184
+  chmod 0644 /dev/cpu/microcode
 
 as root before you can use this.  You'll probably also want to
 get the user-space microcode_ctl utility to use with this.
 
 udev
 ----
-udev is a userspace application for populating /dev dynamically with
-only entries for devices actually present.  udev replaces the basic
+
+``udev`` is a userspace application for populating ``/dev`` dynamically with
+only entries for devices actually present. ``udev`` replaces the basic
 functionality of devfs, while allowing persistent device naming for
 devices.
 
@@ -218,10 +233,10 @@
 ----
 
 Needs libfuse 2.4.0 or later.  Absolute minimum is 2.3.0 but mount
-options 'direct_io' and 'kernel_cache' won't work.
+options ``direct_io`` and ``kernel_cache`` won't work.
 
 Networking
-==========
+**********
 
 General changes
 ---------------
@@ -243,9 +258,9 @@
 upgrade pppd to at least 2.4.0.
 
 If you are not using udev, you must have the device file /dev/ppp
-which can be made by:
+which can be made by::
 
-mknod /dev/ppp c 108 0
+  mknod /dev/ppp c 108 0
 
 as root.
 
@@ -260,22 +275,22 @@
 
 In ancient (2.4 and earlier) kernels, the nfs server needed to know
 about any client that expected to be able to access files via NFS.  This
-information would be given to the kernel by "mountd" when the client
-mounted the filesystem, or by "exportfs" at system startup.  exportfs
-would take information about active clients from /var/lib/nfs/rmtab.
+information would be given to the kernel by ``mountd`` when the client
+mounted the filesystem, or by ``exportfs`` at system startup.  exportfs
+would take information about active clients from ``/var/lib/nfs/rmtab``.
 
 This approach is quite fragile as it depends on rmtab being correct
 which is not always easy, particularly when trying to implement
-fail-over.  Even when the system is working well, rmtab suffers from
+fail-over.  Even when the system is working well, ``rmtab`` suffers from
 getting lots of old entries that never get removed.
 
 With modern kernels we have the option of having the kernel tell mountd
 when it gets a request from an unknown host, and mountd can give
 appropriate export information to the kernel.  This removes the
-dependency on rmtab and means that the kernel only needs to know about
+dependency on ``rmtab`` and means that the kernel only needs to know about
 currently active clients.
 
-To enable this new functionality, you need to:
+To enable this new functionality, you need to::
 
   mount -t nfsd nfsd /proc/fs/nfsd
 
@@ -287,8 +302,32 @@
 ------
 
 On x86 kernels the mcelog utility is needed to process and log machine check
-events when CONFIG_X86_MCE is enabled. Machine check events are errors reported
-by the CPU. Processing them is strongly encouraged.
+events when ``CONFIG_X86_MCE`` is enabled. Machine check events are errors
+reported by the CPU. Processing them is strongly encouraged.
+
+Kernel documentation
+********************
+
+Sphinx
+------
+
+The ReST markups currently used by the Documentation/ files are meant to be
+built with ``Sphinx`` version 1.2 or upper. If you're desiring to build
+PDF outputs, it is recommended to use version 1.4.6.
+
+.. note::
+
+  Please notice that, for PDF and LaTeX output, you'll also need ``XeLaTeX``
+  version 3.14159265. Depending on the distribution, you may also need
+  to install a series of ``texlive`` packages that provide the minimal
+  set of functionalities required for ``XeLaTex`` to work.
+
+Other tools
+-----------
+
+In order to produce documentation from DocBook, you'll also need ``xmlto``.
+Please notice, however, that we're currently migrating all documents to use
+``Sphinx``.
 
 Getting updated software
 ========================
@@ -298,114 +337,149 @@
 
 gcc
 ---
-o  <ftp://ftp.gnu.org/gnu/gcc/>
+
+- <ftp://ftp.gnu.org/gnu/gcc/>
 
 Make
 ----
-o  <ftp://ftp.gnu.org/gnu/make/>
+
+- <ftp://ftp.gnu.org/gnu/make/>
 
 Binutils
 --------
-o  <ftp://ftp.kernel.org/pub/linux/devel/binutils/>
+
+- <ftp://ftp.kernel.org/pub/linux/devel/binutils/>
 
 OpenSSL
 -------
-o  <https://www.openssl.org/>
+
+- <https://www.openssl.org/>
 
 System utilities
 ****************
 
 Util-linux
 ----------
-o  <ftp://ftp.kernel.org/pub/linux/utils/util-linux/>
+
+- <ftp://ftp.kernel.org/pub/linux/utils/util-linux/>
 
 Ksymoops
 --------
-o  <ftp://ftp.kernel.org/pub/linux/utils/kernel/ksymoops/v2.4/>
+
+- <ftp://ftp.kernel.org/pub/linux/utils/kernel/ksymoops/v2.4/>
 
 Module-Init-Tools
 -----------------
-o  <ftp://ftp.kernel.org/pub/linux/kernel/people/rusty/modules/>
+
+- <ftp://ftp.kernel.org/pub/linux/kernel/people/rusty/modules/>
 
 Mkinitrd
 --------
-o  <https://code.launchpad.net/initrd-tools/main>
+
+- <https://code.launchpad.net/initrd-tools/main>
 
 E2fsprogs
 ---------
-o  <http://prdownloads.sourceforge.net/e2fsprogs/e2fsprogs-1.29.tar.gz>
+
+- <http://prdownloads.sourceforge.net/e2fsprogs/e2fsprogs-1.29.tar.gz>
 
 JFSutils
 --------
-o  <http://jfs.sourceforge.net/>
+
+- <http://jfs.sourceforge.net/>
 
 Reiserfsprogs
 -------------
-o  <http://www.kernel.org/pub/linux/utils/fs/reiserfs/>
+
+- <http://www.kernel.org/pub/linux/utils/fs/reiserfs/>
 
 Xfsprogs
 --------
-o  <ftp://oss.sgi.com/projects/xfs/>
+
+- <ftp://oss.sgi.com/projects/xfs/>
 
 Pcmciautils
 -----------
-o  <ftp://ftp.kernel.org/pub/linux/utils/kernel/pcmcia/>
+
+- <ftp://ftp.kernel.org/pub/linux/utils/kernel/pcmcia/>
 
 Quota-tools
-----------
-o  <http://sourceforge.net/projects/linuxquota/>
+-----------
+
+- <http://sourceforge.net/projects/linuxquota/>
 
 DocBook Stylesheets
 -------------------
-o  <http://sourceforge.net/projects/docbook/files/docbook-dsssl/>
+
+- <http://sourceforge.net/projects/docbook/files/docbook-dsssl/>
 
 XMLTO XSLT Frontend
 -------------------
-o  <http://cyberelk.net/tim/xmlto/>
+
+- <http://cyberelk.net/tim/xmlto/>
 
 Intel P6 microcode
 ------------------
-o  <https://downloadcenter.intel.com/>
+
+- <https://downloadcenter.intel.com/>
 
 udev
 ----
-o <http://www.freedesktop.org/software/systemd/man/udev.html>
+
+- <http://www.freedesktop.org/software/systemd/man/udev.html>
 
 FUSE
 ----
-o <http://sourceforge.net/projects/fuse>
+
+- <http://sourceforge.net/projects/fuse>
 
 mcelog
 ------
-o <http://www.mcelog.org/>
+
+- <http://www.mcelog.org/>
 
 Networking
 **********
 
 PPP
 ---
-o  <ftp://ftp.samba.org/pub/ppp/>
+
+- <ftp://ftp.samba.org/pub/ppp/>
 
 Isdn4k-utils
 ------------
-o  <ftp://ftp.isdn4linux.de/pub/isdn4linux/utils/>
+
+- <ftp://ftp.isdn4linux.de/pub/isdn4linux/utils/>
 
 NFS-utils
 ---------
-o  <http://sourceforge.net/project/showfiles.php?group_id=14>
+
+- <http://sourceforge.net/project/showfiles.php?group_id=14>
 
 Iptables
 --------
-o  <http://www.iptables.org/downloads.html>
+
+- <http://www.iptables.org/downloads.html>
 
 Ip-route2
 ---------
-o  <https://www.kernel.org/pub/linux/utils/net/iproute2/>
+
+- <https://www.kernel.org/pub/linux/utils/net/iproute2/>
 
 OProfile
 --------
-o  <http://oprofile.sf.net/download/>
+
+- <http://oprofile.sf.net/download/>
 
 NFS-Utils
 ---------
-o  <http://nfs.sourceforge.net/>
+
+- <http://nfs.sourceforge.net/>
+
+Kernel documentation
+********************
+
+Sphinx
+------
+
+- <http://www.sphinx-doc.org/>
diff --git a/Documentation/CodeOfConflict b/Documentation/CodeOfConflict
index 1684d0b..49a8ecc 100644
--- a/Documentation/CodeOfConflict
+++ b/Documentation/CodeOfConflict
@@ -19,7 +19,7 @@
 will work to resolve the issue to the best of their ability.  For more
 information on who is on the Technical Advisory Board and what their
 role is, please see:
-	http://www.linuxfoundation.org/programs/advisory-councils/tab
+	http://www.linuxfoundation.org/projects/linux/tab
 
 As a reviewer of code, please strive to keep things civil and focused on
 the technical issues involved.  We are all humans, and frustrations can
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index a096836..9c61c03 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -1,8 +1,10 @@
+.. _codingstyle:
 
-		Linux kernel coding style
+Linux kernel coding style
+=========================
 
 This is a short document describing the preferred coding style for the
-linux kernel.  Coding style is very personal, and I won't _force_ my
+linux kernel.  Coding style is very personal, and I won't **force** my
 views on anybody, but this is what goes for anything that I have to be
 able to maintain, and I'd prefer it for most other things too.  Please
 at least consider the points made here.
@@ -13,7 +15,8 @@
 Anyway, here goes:
 
 
-		Chapter 1: Indentation
+1) Indentation
+--------------
 
 Tabs are 8 characters, and thus indentations are also 8 characters.
 There are heretic movements that try to make indentations 4 (or even 2!)
@@ -36,8 +39,10 @@
 Heed that warning.
 
 The preferred way to ease multiple indentation levels in a switch statement is
-to align the "switch" and its subordinate "case" labels in the same column
-instead of "double-indenting" the "case" labels.  E.g.:
+to align the ``switch`` and its subordinate ``case`` labels in the same column
+instead of ``double-indenting`` the ``case`` labels.  E.g.:
+
+.. code-block:: c
 
 	switch (suffix) {
 	case 'G':
@@ -59,6 +64,8 @@
 Don't put multiple statements on a single line unless you have
 something to hide:
 
+.. code-block:: c
+
 	if (condition) do_this;
 	  do_something_everytime;
 
@@ -71,7 +78,8 @@
 Get a decent editor and don't leave whitespace at the end of lines.
 
 
-		Chapter 2: Breaking long lines and strings
+2) Breaking long lines and strings
+----------------------------------
 
 Coding style is all about readability and maintainability using commonly
 available tools.
@@ -87,7 +95,8 @@
 printk messages, because that breaks the ability to grep for them.
 
 
-		Chapter 3: Placing Braces and Spaces
+3) Placing Braces and Spaces
+----------------------------
 
 The other issue that always comes up in C styling is the placement of
 braces.  Unlike the indent size, there are few technical reasons to
@@ -95,6 +104,8 @@
 shown to us by the prophets Kernighan and Ritchie, is to put the opening
 brace last on the line, and put the closing brace first, thusly:
 
+.. code-block:: c
+
 	if (x is true) {
 		we do y
 	}
@@ -102,6 +113,8 @@
 This applies to all non-function statement blocks (if, switch, for,
 while, do).  E.g.:
 
+.. code-block:: c
+
 	switch (action) {
 	case KOBJ_ADD:
 		return "add";
@@ -116,6 +129,8 @@
 However, there is one special case, namely functions: they have the
 opening brace at the beginning of the next line, thus:
 
+.. code-block:: c
+
 	int function(int x)
 	{
 		body of function
@@ -123,20 +138,24 @@
 
 Heretic people all over the world have claimed that this inconsistency
 is ...  well ...  inconsistent, but all right-thinking people know that
-(a) K&R are _right_ and (b) K&R are right.  Besides, functions are
+(a) K&R are **right** and (b) K&R are right.  Besides, functions are
 special anyway (you can't nest them in C).
 
-Note that the closing brace is empty on a line of its own, _except_ in
+Note that the closing brace is empty on a line of its own, **except** in
 the cases where it is followed by a continuation of the same statement,
-ie a "while" in a do-statement or an "else" in an if-statement, like
+ie a ``while`` in a do-statement or an ``else`` in an if-statement, like
 this:
 
+.. code-block:: c
+
 	do {
 		body of do-loop
 	} while (condition);
 
 and
 
+.. code-block:: c
+
 	if (x == y) {
 		..
 	} else if (x > y) {
@@ -155,11 +174,15 @@
 
 Do not unnecessarily use braces where a single statement will do.
 
+.. code-block:: c
+
 	if (condition)
 		action();
 
 and
 
+.. code-block:: none
+
 	if (condition)
 		do_this();
 	else
@@ -168,6 +191,8 @@
 This does not apply if only one branch of a conditional statement is a single
 statement; in the latter case use braces in both branches:
 
+.. code-block:: c
+
 	if (condition) {
 		do_this();
 		do_that();
@@ -175,57 +200,67 @@
 		otherwise();
 	}
 
-		3.1:  Spaces
+3.1) Spaces
+***********
 
 Linux kernel style for use of spaces depends (mostly) on
 function-versus-keyword usage.  Use a space after (most) keywords.  The
 notable exceptions are sizeof, typeof, alignof, and __attribute__, which look
 somewhat like functions (and are usually used with parentheses in Linux,
-although they are not required in the language, as in: "sizeof info" after
-"struct fileinfo info;" is declared).
+although they are not required in the language, as in: ``sizeof info`` after
+``struct fileinfo info;`` is declared).
 
-So use a space after these keywords:
+So use a space after these keywords::
 
 	if, switch, case, for, do, while
 
 but not with sizeof, typeof, alignof, or __attribute__.  E.g.,
 
+.. code-block:: c
+
+
 	s = sizeof(struct file);
 
 Do not add spaces around (inside) parenthesized expressions.  This example is
-*bad*:
+**bad**:
+
+.. code-block:: c
+
 
 	s = sizeof( struct file );
 
 When declaring pointer data or a function that returns a pointer type, the
-preferred use of '*' is adjacent to the data name or function name and not
+preferred use of ``*`` is adjacent to the data name or function name and not
 adjacent to the type name.  Examples:
 
+.. code-block:: c
+
+
 	char *linux_banner;
 	unsigned long long memparse(char *ptr, char **retptr);
 	char *match_strdup(substring_t *s);
 
 Use one space around (on each side of) most binary and ternary operators,
-such as any of these:
+such as any of these::
 
 	=  +  -  <  >  *  /  %  |  &  ^  <=  >=  ==  !=  ?  :
 
-but no space after unary operators:
+but no space after unary operators::
 
 	&  *  +  -  ~  !  sizeof  typeof  alignof  __attribute__  defined
 
-no space before the postfix increment & decrement unary operators:
+no space before the postfix increment & decrement unary operators::
 
 	++  --
 
-no space after the prefix increment & decrement unary operators:
+no space after the prefix increment & decrement unary operators::
 
 	++  --
 
-and no space around the '.' and "->" structure member operators.
+and no space around the ``.`` and ``->`` structure member operators.
 
 Do not leave trailing whitespace at the ends of lines.  Some editors with
-"smart" indentation will insert whitespace at the beginning of new lines as
+``smart`` indentation will insert whitespace at the beginning of new lines as
 appropriate, so you can start typing the next line of code right away.
 However, some such editors do not remove the whitespace if you end up not
 putting a line of code there, such as if you leave a blank line.  As a result,
@@ -237,22 +272,23 @@
 context lines.
 
 
-		Chapter 4: Naming
+4) Naming
+---------
 
 C is a Spartan language, and so should your naming be.  Unlike Modula-2
 and Pascal programmers, C programmers do not use cute names like
 ThisVariableIsATemporaryCounter.  A C programmer would call that
-variable "tmp", which is much easier to write, and not the least more
+variable ``tmp``, which is much easier to write, and not the least more
 difficult to understand.
 
 HOWEVER, while mixed-case names are frowned upon, descriptive names for
-global variables are a must.  To call a global function "foo" is a
+global variables are a must.  To call a global function ``foo`` is a
 shooting offense.
 
-GLOBAL variables (to be used only if you _really_ need them) need to
+GLOBAL variables (to be used only if you **really** need them) need to
 have descriptive names, as do global functions.  If you have a function
 that counts the number of active users, you should call that
-"count_active_users()" or similar, you should _not_ call it "cntusr()".
+``count_active_users()`` or similar, you should **not** call it ``cntusr()``.
 
 Encoding the type of a function into the name (so-called Hungarian
 notation) is brain damaged - the compiler knows the types anyway and can
@@ -260,9 +296,9 @@
 makes buggy programs.
 
 LOCAL variable names should be short, and to the point.  If you have
-some random integer loop counter, it should probably be called "i".
-Calling it "loop_counter" is non-productive, if there is no chance of it
-being mis-understood.  Similarly, "tmp" can be just about any type of
+some random integer loop counter, it should probably be called ``i``.
+Calling it ``loop_counter`` is non-productive, if there is no chance of it
+being mis-understood.  Similarly, ``tmp`` can be just about any type of
 variable that is used to hold a temporary value.
 
 If you are afraid to mix up your local variable names, you have another
@@ -270,59 +306,69 @@
 See chapter 6 (Functions).
 
 
-		Chapter 5: Typedefs
+5) Typedefs
+-----------
 
-Please don't use things like "vps_t".
-It's a _mistake_ to use typedef for structures and pointers. When you see a
+Please don't use things like ``vps_t``.
+It's a **mistake** to use typedef for structures and pointers. When you see a
+
+.. code-block:: c
+
 
 	vps_t a;
 
 in the source, what does it mean?
 In contrast, if it says
 
+.. code-block:: c
+
 	struct virtual_container *a;
 
-you can actually tell what "a" is.
+you can actually tell what ``a`` is.
 
-Lots of people think that typedefs "help readability". Not so. They are
+Lots of people think that typedefs ``help readability``. Not so. They are
 useful only for:
 
- (a) totally opaque objects (where the typedef is actively used to _hide_
+ (a) totally opaque objects (where the typedef is actively used to **hide**
      what the object is).
 
-     Example: "pte_t" etc. opaque objects that you can only access using
+     Example: ``pte_t`` etc. opaque objects that you can only access using
      the proper accessor functions.
 
-     NOTE! Opaqueness and "accessor functions" are not good in themselves.
-     The reason we have them for things like pte_t etc. is that there
-     really is absolutely _zero_ portably accessible information there.
+     .. note::
 
- (b) Clear integer types, where the abstraction _helps_ avoid confusion
-     whether it is "int" or "long".
+       Opaqueness and ``accessor functions`` are not good in themselves.
+       The reason we have them for things like pte_t etc. is that there
+       really is absolutely **zero** portably accessible information there.
+
+ (b) Clear integer types, where the abstraction **helps** avoid confusion
+     whether it is ``int`` or ``long``.
 
      u8/u16/u32 are perfectly fine typedefs, although they fit into
      category (d) better than here.
 
-     NOTE! Again - there needs to be a _reason_ for this. If something is
-     "unsigned long", then there's no reason to do
+     .. note::
+
+       Again - there needs to be a **reason** for this. If something is
+       ``unsigned long``, then there's no reason to do
 
 	typedef unsigned long myflags_t;
 
      but if there is a clear reason for why it under certain circumstances
-     might be an "unsigned int" and under other configurations might be
-     "unsigned long", then by all means go ahead and use a typedef.
+     might be an ``unsigned int`` and under other configurations might be
+     ``unsigned long``, then by all means go ahead and use a typedef.
 
- (c) when you use sparse to literally create a _new_ type for
+ (c) when you use sparse to literally create a **new** type for
      type-checking.
 
  (d) New types which are identical to standard C99 types, in certain
      exceptional circumstances.
 
      Although it would only take a short amount of time for the eyes and
-     brain to become accustomed to the standard types like 'uint32_t',
+     brain to become accustomed to the standard types like ``uint32_t``,
      some people object to their use anyway.
 
-     Therefore, the Linux-specific 'u8/u16/u32/u64' types and their
+     Therefore, the Linux-specific ``u8/u16/u32/u64`` types and their
      signed equivalents which are identical to standard types are
      permitted -- although they are not mandatory in new code of your
      own.
@@ -333,7 +379,7 @@
  (e) Types safe for use in userspace.
 
      In certain structures which are visible to userspace, we cannot
-     require C99 types and cannot use the 'u32' form above. Thus, we
+     require C99 types and cannot use the ``u32`` form above. Thus, we
      use __u32 and similar types in all structures which are shared
      with userspace.
 
@@ -341,10 +387,11 @@
 EVER use a typedef unless you can clearly match one of those rules.
 
 In general, a pointer, or a struct that has elements that can reasonably
-be directly accessed should _never_ be a typedef.
+be directly accessed should **never** be a typedef.
 
 
-		Chapter 6: Functions
+6) Functions
+------------
 
 Functions should be short and sweet, and do just one thing.  They should
 fit on one or two screenfuls of text (the ISO/ANSI screen size is 80x24,
@@ -372,8 +419,10 @@
 to understand what you did 2 weeks from now.
 
 In source files, separate functions with one blank line.  If the function is
-exported, the EXPORT* macro for it should follow immediately after the closing
-function brace line.  E.g.:
+exported, the **EXPORT** macro for it should follow immediately after the
+closing function brace line.  E.g.:
+
+.. code-block:: c
 
 	int system_is_up(void)
 	{
@@ -386,7 +435,8 @@
 because it is a simple way to add valuable information for the reader.
 
 
-		Chapter 7: Centralized exiting of functions
+7) Centralized exiting of functions
+-----------------------------------
 
 Albeit deprecated by some people, the equivalent of the goto statement is
 used frequently by compilers in form of the unconditional jump instruction.
@@ -396,18 +446,21 @@
 cleanup needed then just return directly.
 
 Choose label names which say what the goto does or why the goto exists.  An
-example of a good name could be "out_buffer:" if the goto frees "buffer".  Avoid
-using GW-BASIC names like "err1:" and "err2:".  Also don't name them after the
-goto location like "err_kmalloc_failed:"
+example of a good name could be ``out_free_buffer:`` if the goto frees ``buffer``.
+Avoid using GW-BASIC names like ``err1:`` and ``err2:``, as you would have to
+renumber them if you ever add or remove exit paths, and they make correctness
+difficult to verify anyway.
 
 The rationale for using gotos is:
 
 - unconditional statements are easier to understand and follow
 - nesting is reduced
 - errors by not updating individual exit points when making
-    modifications are prevented
+  modifications are prevented
 - saves the compiler work to optimize redundant code away ;)
 
+.. code-block:: c
+
 	int fun(int a)
 	{
 		int result = 0;
@@ -425,27 +478,41 @@
 			goto out_buffer;
 		}
 		...
-	out_buffer:
+	out_free_buffer:
 		kfree(buffer);
 		return result;
 	}
 
-A common type of bug to be aware of is "one err bugs" which look like this:
+A common type of bug to be aware of is ``one err bugs`` which look like this:
+
+.. code-block:: c
 
 	err:
 		kfree(foo->bar);
 		kfree(foo);
 		return ret;
 
-The bug in this code is that on some exit paths "foo" is NULL.  Normally the
-fix for this is to split it up into two error labels "err_bar:" and "err_foo:".
+The bug in this code is that on some exit paths ``foo`` is NULL.  Normally the
+fix for this is to split it up into two error labels ``err_free_bar:`` and
+``err_free_foo:``:
+
+.. code-block:: c
+
+	 err_free_bar:
+		kfree(foo->bar);
+	 err_free_foo:
+		kfree(foo);
+		return ret;
+
+Ideally you should simulate errors to test all exit paths.
 
 
-		Chapter 8: Commenting
+8) Commenting
+-------------
 
 Comments are good, but there is also a danger of over-commenting.  NEVER
 try to explain HOW your code works in a comment: it's much better to
-write the code so that the _working_ is obvious, and it's a waste of
+write the code so that the **working** is obvious, and it's a waste of
 time to explain badly written code.
 
 Generally, you want your comments to tell WHAT your code does, not HOW.
@@ -461,11 +528,10 @@
 See the files Documentation/kernel-documentation.rst and scripts/kernel-doc
 for details.
 
-Linux style for comments is the C89 "/* ... */" style.
-Don't use C99-style "// ..." comments.
-
 The preferred style for long (multi-line) comments is:
 
+.. code-block:: c
+
 	/*
 	 * This is the preferred style for multi-line
 	 * comments in the Linux kernel source code.
@@ -478,6 +544,8 @@
 For files in net/ and drivers/net/ the preferred style for long (multi-line)
 comments is a little different.
 
+.. code-block:: c
+
 	/* The preferred comment style for files in net/ and drivers/net
 	 * looks like this.
 	 *
@@ -491,10 +559,11 @@
 item, explaining its use.
 
 
-		Chapter 9: You've made a mess of it
+9) You've made a mess of it
+---------------------------
 
 That's OK, we all do.  You've probably been told by your long-time Unix
-user helper that "GNU emacs" automatically formats the C sources for
+user helper that ``GNU emacs`` automatically formats the C sources for
 you, and you've noticed that yes, it does do that, but the defaults it
 uses are less than desirable (in fact, they are worse than random
 typing - an infinite number of monkeys typing into GNU emacs would never
@@ -503,63 +572,66 @@
 So, you can either get rid of GNU emacs, or change it to use saner
 values.  To do the latter, you can stick the following in your .emacs file:
 
-(defun c-lineup-arglist-tabs-only (ignored)
-  "Line up argument lists by tabs, not spaces"
-  (let* ((anchor (c-langelem-pos c-syntactic-element))
-         (column (c-langelem-2nd-pos c-syntactic-element))
-         (offset (- (1+ column) anchor))
-         (steps (floor offset c-basic-offset)))
-    (* (max steps 1)
-       c-basic-offset)))
+.. code-block:: none
 
-(add-hook 'c-mode-common-hook
-          (lambda ()
-            ;; Add kernel style
-            (c-add-style
-             "linux-tabs-only"
-             '("linux" (c-offsets-alist
-                        (arglist-cont-nonempty
-                         c-lineup-gcc-asm-reg
-                         c-lineup-arglist-tabs-only))))))
+  (defun c-lineup-arglist-tabs-only (ignored)
+    "Line up argument lists by tabs, not spaces"
+    (let* ((anchor (c-langelem-pos c-syntactic-element))
+           (column (c-langelem-2nd-pos c-syntactic-element))
+           (offset (- (1+ column) anchor))
+           (steps (floor offset c-basic-offset)))
+      (* (max steps 1)
+         c-basic-offset)))
 
-(add-hook 'c-mode-hook
-          (lambda ()
-            (let ((filename (buffer-file-name)))
-              ;; Enable kernel mode for the appropriate files
-              (when (and filename
-                         (string-match (expand-file-name "~/src/linux-trees")
-                                       filename))
-                (setq indent-tabs-mode t)
-                (setq show-trailing-whitespace t)
-                (c-set-style "linux-tabs-only")))))
+  (add-hook 'c-mode-common-hook
+            (lambda ()
+              ;; Add kernel style
+              (c-add-style
+               "linux-tabs-only"
+               '("linux" (c-offsets-alist
+                          (arglist-cont-nonempty
+                           c-lineup-gcc-asm-reg
+                           c-lineup-arglist-tabs-only))))))
+
+  (add-hook 'c-mode-hook
+            (lambda ()
+              (let ((filename (buffer-file-name)))
+                ;; Enable kernel mode for the appropriate files
+                (when (and filename
+                           (string-match (expand-file-name "~/src/linux-trees")
+                                         filename))
+                  (setq indent-tabs-mode t)
+                  (setq show-trailing-whitespace t)
+                  (c-set-style "linux-tabs-only")))))
 
 This will make emacs go better with the kernel coding style for C
-files below ~/src/linux-trees.
+files below ``~/src/linux-trees``.
 
 But even if you fail in getting emacs to do sane formatting, not
-everything is lost: use "indent".
+everything is lost: use ``indent``.
 
 Now, again, GNU indent has the same brain-dead settings that GNU emacs
 has, which is why you need to give it a few command line options.
 However, that's not too bad, because even the makers of GNU indent
 recognize the authority of K&R (the GNU people aren't evil, they are
 just severely misguided in this matter), so you just give indent the
-options "-kr -i8" (stands for "K&R, 8 character indents"), or use
-"scripts/Lindent", which indents in the latest style.
+options ``-kr -i8`` (stands for ``K&R, 8 character indents``), or use
+``scripts/Lindent``, which indents in the latest style.
 
-"indent" has a lot of options, and especially when it comes to comment
+``indent`` has a lot of options, and especially when it comes to comment
 re-formatting you may want to take a look at the man page.  But
-remember: "indent" is not a fix for bad programming.
+remember: ``indent`` is not a fix for bad programming.
 
 
-		Chapter 10: Kconfig configuration files
+10) Kconfig configuration files
+-------------------------------
 
 For all of the Kconfig* configuration files throughout the source tree,
-the indentation is somewhat different.  Lines under a "config" definition
+the indentation is somewhat different.  Lines under a ``config`` definition
 are indented with one tab, while help text is indented an additional two
-spaces.  Example:
+spaces.  Example::
 
-config AUDIT
+  config AUDIT
 	bool "Auditing support"
 	depends on NET
 	help
@@ -569,9 +641,9 @@
 	  auditing without CONFIG_AUDITSYSCALL.
 
 Seriously dangerous features (such as write support for certain
-filesystems) should advertise this prominently in their prompt string:
+filesystems) should advertise this prominently in their prompt string::
 
-config ADFS_FS_RW
+  config ADFS_FS_RW
 	bool "ADFS write support (DANGEROUS)"
 	depends on ADFS_FS
 	...
@@ -580,41 +652,45 @@
 Documentation/kbuild/kconfig-language.txt.
 
 
-		Chapter 11: Data structures
+11) Data structures
+-------------------
 
 Data structures that have visibility outside the single-threaded
 environment they are created and destroyed in should always have
 reference counts.  In the kernel, garbage collection doesn't exist (and
 outside the kernel garbage collection is slow and inefficient), which
-means that you absolutely _have_ to reference count all your uses.
+means that you absolutely **have** to reference count all your uses.
 
 Reference counting means that you can avoid locking, and allows multiple
 users to have access to the data structure in parallel - and not having
 to worry about the structure suddenly going away from under them just
 because they slept or did something else for a while.
 
-Note that locking is _not_ a replacement for reference counting.
+Note that locking is **not** a replacement for reference counting.
 Locking is used to keep data structures coherent, while reference
 counting is a memory management technique.  Usually both are needed, and
 they are not to be confused with each other.
 
 Many data structures can indeed have two levels of reference counting,
-when there are users of different "classes".  The subclass count counts
+when there are users of different ``classes``.  The subclass count counts
 the number of subclass users, and decrements the global count just once
 when the subclass count goes to zero.
 
-Examples of this kind of "multi-level-reference-counting" can be found in
-memory management ("struct mm_struct": mm_users and mm_count), and in
-filesystem code ("struct super_block": s_count and s_active).
+Examples of this kind of ``multi-level-reference-counting`` can be found in
+memory management (``struct mm_struct``: mm_users and mm_count), and in
+filesystem code (``struct super_block``: s_count and s_active).
 
 Remember: if another thread can find your data structure, and you don't
 have a reference count on it, you almost certainly have a bug.
 
 
-		Chapter 12: Macros, Enums and RTL
+12) Macros, Enums and RTL
+-------------------------
 
 Names of macros defining constants and labels in enums are capitalized.
 
+.. code-block:: c
+
 	#define CONSTANT 0x12345
 
 Enums are preferred when defining several related constants.
@@ -626,7 +702,9 @@
 
 Macros with multiple statements should be enclosed in a do - while block:
 
-	#define macrofun(a, b, c) 			\
+.. code-block:: c
+
+	#define macrofun(a, b, c)			\
 		do {					\
 			if (a == 5)			\
 				do_this(b, c);		\
@@ -636,17 +714,21 @@
 
 1) macros that affect control flow:
 
+.. code-block:: c
+
 	#define FOO(x)					\
 		do {					\
 			if (blah(x) < 0)		\
 				return -EBUGGERED;	\
 		} while (0)
 
-is a _very_ bad idea.  It looks like a function call but exits the "calling"
+is a **very** bad idea.  It looks like a function call but exits the ``calling``
 function; don't break the internal parsers of those who will read the code.
 
 2) macros that depend on having a local variable with a magic name:
 
+.. code-block:: c
+
 	#define FOO(val) bar(index, val)
 
 might look like a good thing, but it's confusing as hell when one reads the
@@ -659,18 +741,22 @@
 must enclose the expression in parentheses. Beware of similar issues with
 macros using parameters.
 
+.. code-block:: c
+
 	#define CONSTANT 0x4000
 	#define CONSTEXP (CONSTANT | 3)
 
 5) namespace collisions when defining local variables in macros resembling
 functions:
 
-#define FOO(x)				\
-({					\
-	typeof(x) ret;			\
-	ret = calc_ret(x);		\
-	(ret);				\
-})
+.. code-block:: c
+
+	#define FOO(x)				\
+	({					\
+		typeof(x) ret;			\
+		ret = calc_ret(x);		\
+		(ret);				\
+	})
 
 ret is a common name for a local variable - __foo_ret is less likely
 to collide with an existing variable.
@@ -679,11 +765,12 @@
 covers RTL which is used frequently with assembly language in the kernel.
 
 
-		Chapter 13: Printing kernel messages
+13) Printing kernel messages
+----------------------------
 
 Kernel developers like to be seen as literate. Do mind the spelling
 of kernel messages to make a good impression. Do not use crippled
-words like "dont"; use "do not" or "don't" instead.  Make the messages
+words like ``dont``; use ``do not`` or ``don't`` instead.  Make the messages
 concise, clear, and unambiguous.
 
 Kernel messages do not have to be terminated with a period.
@@ -713,7 +800,8 @@
 used.
 
 
-		Chapter 14: Allocating memory
+14) Allocating memory
+---------------------
 
 The kernel provides the following general purpose memory allocators:
 kmalloc(), kzalloc(), kmalloc_array(), kcalloc(), vmalloc(), and
@@ -722,6 +810,8 @@
 
 The preferred form for passing a size of a struct is the following:
 
+.. code-block:: c
+
 	p = kmalloc(sizeof(*p), ...);
 
 The alternative form where struct name is spelled out hurts readability and
@@ -734,20 +824,25 @@
 
 The preferred form for allocating an array is the following:
 
+.. code-block:: c
+
 	p = kmalloc_array(n, sizeof(...), ...);
 
 The preferred form for allocating a zeroed array is the following:
 
+.. code-block:: c
+
 	p = kcalloc(n, sizeof(...), ...);
 
 Both forms check for overflow on the allocation size n * sizeof(...),
 and return NULL if that occurred.
 
 
-		Chapter 15: The inline disease
+15) The inline disease
+----------------------
 
 There appears to be a common misperception that gcc has a magic "make me
-faster" speedup option called "inline". While the use of inlines can be
+faster" speedup option called ``inline``. While the use of inlines can be
 appropriate (for example as a means of replacing macros, see Chapter 12), it
 very often is not. Abundant use of the inline keyword leads to a much bigger
 kernel, which in turn slows the system as a whole down, due to a bigger
@@ -771,26 +866,27 @@
 something it would have done anyway.
 
 
-		Chapter 16: Function return values and names
+16) Function return values and names
+------------------------------------
 
 Functions can return values of many different kinds, and one of the
 most common is a value indicating whether the function succeeded or
 failed.  Such a value can be represented as an error-code integer
-(-Exxx = failure, 0 = success) or a "succeeded" boolean (0 = failure,
+(-Exxx = failure, 0 = success) or a ``succeeded`` boolean (0 = failure,
 non-zero = success).
 
 Mixing up these two sorts of representations is a fertile source of
 difficult-to-find bugs.  If the C language included a strong distinction
 between integers and booleans then the compiler would find these mistakes
 for us... but it doesn't.  To help prevent such bugs, always follow this
-convention:
+convention::
 
 	If the name of a function is an action or an imperative command,
 	the function should return an error-code integer.  If the name
 	is a predicate, the function should return a "succeeded" boolean.
 
-For example, "add work" is a command, and the add_work() function returns 0
-for success or -EBUSY for failure.  In the same way, "PCI device present" is
+For example, ``add work`` is a command, and the add_work() function returns 0
+for success or -EBUSY for failure.  In the same way, ``PCI device present`` is
 a predicate, and the pci_dev_present() function returns 1 if it succeeds in
 finding a matching device or 0 if it doesn't.
 
@@ -805,17 +901,22 @@
 NULL or the ERR_PTR mechanism to report failure.
 
 
-		Chapter 17:  Don't re-invent the kernel macros
+17) Don't re-invent the kernel macros
+-------------------------------------
 
 The header file include/linux/kernel.h contains a number of macros that
 you should use, rather than explicitly coding some variant of them yourself.
 For example, if you need to calculate the length of an array, take advantage
 of the macro
 
+.. code-block:: c
+
 	#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
 
 Similarly, if you need to calculate the size of some structure member, use
 
+.. code-block:: c
+
 	#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
 
 There are also min() and max() macros that do strict type checking if you
@@ -823,16 +924,21 @@
 defined that you shouldn't reproduce in your code.
 
 
-		Chapter 18:  Editor modelines and other cruft
+18) Editor modelines and other cruft
+------------------------------------
 
 Some editors can interpret configuration information embedded in source files,
 indicated with special markers.  For example, emacs interprets lines marked
 like this:
 
+.. code-block:: c
+
 	-*- mode: c -*-
 
 Or like this:
 
+.. code-block:: c
+
 	/*
 	Local Variables:
 	compile-command: "gcc -DMAGIC_DEBUG_FLAG foo.c"
@@ -841,6 +947,8 @@
 
 Vim interprets markers that look like this:
 
+.. code-block:: c
+
 	/* vim:set sw=8 noet */
 
 Do not include any of these in source files.  People have their own personal
@@ -850,7 +958,8 @@
 work correctly.
 
 
-		Chapter 19:  Inline assembly
+19) Inline assembly
+-------------------
 
 In architecture-specific code, you may need to use inline assembly to interface
 with CPU or platform functionality.  Don't hesitate to do so when necessary.
@@ -863,7 +972,7 @@
 
 Large, non-trivial assembly functions should go in .S files, with corresponding
 C prototypes defined in C header files.  The C prototypes for assembly
-functions should use "asmlinkage".
+functions should use ``asmlinkage``.
 
 You may need to mark your asm statement as volatile, to prevent GCC from
 removing it if GCC doesn't notice any side effects.  You don't always need to
@@ -874,12 +983,15 @@
 string, and end each string except the last with \n\t to properly indent the
 next instruction in the assembly output:
 
+.. code-block:: c
+
 	asm ("magic %reg1, #42\n\t"
 	     "more_magic %reg2, %reg3"
 	     : /* outputs */ : /* inputs */ : /* clobbers */);
 
 
-		Chapter 20: Conditional Compilation
+20) Conditional Compilation
+---------------------------
 
 Wherever possible, don't use preprocessor conditionals (#if, #ifdef) in .c
 files; doing so makes code harder to read and logic harder to follow.  Instead,
@@ -903,6 +1015,8 @@
 Within code, where possible, use the IS_ENABLED macro to convert a Kconfig
 symbol into a C boolean expression, and use it in a normal C conditional:
 
+.. code-block:: c
+
 	if (IS_ENABLED(CONFIG_SOMETHING)) {
 		...
 	}
@@ -918,12 +1032,15 @@
 place a comment after the #endif on the same line, noting the conditional
 expression used.  For instance:
 
+.. code-block:: c
+
 	#ifdef CONFIG_SOMETHING
 	...
 	#endif /* CONFIG_SOMETHING */
 
 
-		Appendix I: References
+Appendix I) References
+----------------------
 
 The C Programming Language, Second Edition
 by Brian W. Kernighan and Dennis M. Ritchie.
@@ -943,4 +1060,3 @@
 
 Kernel CodingStyle, by greg@kroah.com at OLS 2002:
 http://www.kroah.com/linux/talks/ols_2002_kernel_codingstyle_talk/html/
-
diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt
index 781024e..979228b 100644
--- a/Documentation/DMA-API-HOWTO.txt
+++ b/Documentation/DMA-API-HOWTO.txt
@@ -699,7 +699,7 @@
 		dma_addr_t mapping;
 
 		mapping = dma_map_single(cp->dev, buffer, len, DMA_FROM_DEVICE);
-		if (dma_mapping_error(cp->dev, dma_handle)) {
+		if (dma_mapping_error(cp->dev, mapping)) {
 			/*
 			 * reduce current DMA mapping usage,
 			 * delay and try again later or
@@ -931,10 +931,8 @@
 
 1) Struct scatterlist requirements.
 
-   Don't invent the architecture specific struct scatterlist; just use
-   <asm-generic/scatterlist.h>. You need to enable
-   CONFIG_NEED_SG_DMA_LENGTH if the architecture supports IOMMUs
-   (including software IOMMU).
+   You need to enable CONFIG_NEED_SG_DMA_LENGTH if the architecture
+   supports IOMMUs (including software IOMMU).
 
 2) ARCH_DMA_MINALIGN
 
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 64460a8..736f591 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -6,7 +6,7 @@
 # To add a new book the only step required is to add the book to the
 # list of DOCBOOKS.
 
-DOCBOOKS := z8530book.xml device-drivers.xml \
+DOCBOOKS := z8530book.xml  \
 	    kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
 	    writing_usb_driver.xml networking.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
@@ -22,8 +22,14 @@
 # Skip DocBook build if the user explicitly requested no DOCBOOKS.
 .DEFAULT:
 	@echo "  SKIP    DocBook $@ target (DOCBOOKS=\"\" specified)."
-
 else
+ifneq ($(SPHINXDIRS),)
+
+# Skip DocBook build if the user explicitly requested a sphinx dir
+.DEFAULT:
+	@echo "  SKIP    DocBook $@ target (SPHINXDIRS specified)."
+else
+
 
 ###
 # The build process is as follows (targets):
@@ -66,6 +72,7 @@
 
 # no-op for the DocBook toolchain
 epubdocs:
+latexdocs:
 
 ###
 #External programs used
@@ -221,6 +228,7 @@
 	   echo "</programlisting>")  > $@
 
 endif # DOCBOOKS=""
+endif # SPHINDIR=...
 
 ###
 # Help targets as used by the top-level makefile
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
deleted file mode 100644
index 9c10030..0000000
--- a/Documentation/DocBook/device-drivers.tmpl
+++ /dev/null
@@ -1,521 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="LinuxDriversAPI">
- <bookinfo>
-  <title>Linux Device Drivers</title>
-
-  <legalnotice>
-   <para>
-     This documentation is free software; you can redistribute
-     it and/or modify it under the terms of the GNU General Public
-     License as published by the Free Software Foundation; either
-     version 2 of the License, or (at your option) any later
-     version.
-   </para>
-
-   <para>
-     This program is distributed in the hope that it will be
-     useful, but WITHOUT ANY WARRANTY; without even the implied
-     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-     See the GNU General Public License for more details.
-   </para>
-
-   <para>
-     You should have received a copy of the GNU General Public
-     License along with this program; if not, write to the Free
-     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-     MA 02111-1307 USA
-   </para>
-
-   <para>
-     For more details see the file COPYING in the source
-     distribution of Linux.
-   </para>
-  </legalnotice>
- </bookinfo>
-
-<toc></toc>
-
-  <chapter id="Basics">
-     <title>Driver Basics</title>
-     <sect1><title>Driver Entry and Exit points</title>
-!Iinclude/linux/init.h
-     </sect1>
-
-     <sect1><title>Atomic and pointer manipulation</title>
-!Iarch/x86/include/asm/atomic.h
-     </sect1>
-
-     <sect1><title>Delaying, scheduling, and timer routines</title>
-!Iinclude/linux/sched.h
-!Ekernel/sched/core.c
-!Ikernel/sched/cpupri.c
-!Ikernel/sched/fair.c
-!Iinclude/linux/completion.h
-!Ekernel/time/timer.c
-     </sect1>
-     <sect1><title>Wait queues and Wake events</title>
-!Iinclude/linux/wait.h
-!Ekernel/sched/wait.c
-     </sect1>
-     <sect1><title>High-resolution timers</title>
-!Iinclude/linux/ktime.h
-!Iinclude/linux/hrtimer.h
-!Ekernel/time/hrtimer.c
-     </sect1>
-     <sect1><title>Workqueues and Kevents</title>
-!Iinclude/linux/workqueue.h
-!Ekernel/workqueue.c
-     </sect1>
-     <sect1><title>Internal Functions</title>
-!Ikernel/exit.c
-!Ikernel/signal.c
-!Iinclude/linux/kthread.h
-!Ekernel/kthread.c
-     </sect1>
-
-     <sect1><title>Kernel objects manipulation</title>
-<!--
-X!Iinclude/linux/kobject.h
--->
-!Elib/kobject.c
-     </sect1>
-
-     <sect1><title>Kernel utility functions</title>
-!Iinclude/linux/kernel.h
-!Ekernel/printk/printk.c
-!Ekernel/panic.c
-!Ekernel/sys.c
-!Ekernel/rcu/srcu.c
-!Ekernel/rcu/tree.c
-!Ekernel/rcu/tree_plugin.h
-!Ekernel/rcu/update.c
-     </sect1>
-
-     <sect1><title>Device Resource Management</title>
-!Edrivers/base/devres.c
-     </sect1>
-
-  </chapter>
-
-  <chapter id="devdrivers">
-     <title>Device drivers infrastructure</title>
-     <sect1><title>The Basic Device Driver-Model Structures </title>
-!Iinclude/linux/device.h
-     </sect1>
-     <sect1><title>Device Drivers Base</title>
-!Idrivers/base/init.c
-!Edrivers/base/driver.c
-!Edrivers/base/core.c
-!Edrivers/base/syscore.c
-!Edrivers/base/class.c
-!Idrivers/base/node.c
-!Edrivers/base/firmware_class.c
-!Edrivers/base/transport_class.c
-<!-- Cannot be included, because
-     attribute_container_add_class_device_adapter
- and attribute_container_classdev_to_container
-     exceed allowed 44 characters maximum
-X!Edrivers/base/attribute_container.c
--->
-!Edrivers/base/dd.c
-<!--
-X!Edrivers/base/interface.c
--->
-!Iinclude/linux/platform_device.h
-!Edrivers/base/platform.c
-!Edrivers/base/bus.c
-     </sect1>
-     <sect1>
-       <title>Buffer Sharing and Synchronization</title>
-       <para>
-         The dma-buf subsystem provides the framework for sharing buffers
-         for hardware (DMA) access across multiple device drivers and
-         subsystems, and for synchronizing asynchronous hardware access.
-       </para>
-       <para>
-         This is used, for example, by drm "prime" multi-GPU support, but
-         is of course not limited to GPU use cases.
-       </para>
-       <para>
-         The three main components of this are: (1) dma-buf, representing
-         a sg_table and exposed to userspace as a file descriptor to allow
-         passing between devices, (2) fence, which provides a mechanism
-         to signal when one device as finished access, and (3) reservation,
-         which manages the shared or exclusive fence(s) associated with
-         the buffer.
-       </para>
-       <sect2><title>dma-buf</title>
-!Edrivers/dma-buf/dma-buf.c
-!Iinclude/linux/dma-buf.h
-       </sect2>
-       <sect2><title>reservation</title>
-!Pdrivers/dma-buf/reservation.c Reservation Object Overview
-!Edrivers/dma-buf/reservation.c
-!Iinclude/linux/reservation.h
-       </sect2>
-       <sect2><title>fence</title>
-!Edrivers/dma-buf/fence.c
-!Iinclude/linux/fence.h
-!Edrivers/dma-buf/seqno-fence.c
-!Iinclude/linux/seqno-fence.h
-!Edrivers/dma-buf/fence-array.c
-!Iinclude/linux/fence-array.h
-!Edrivers/dma-buf/reservation.c
-!Iinclude/linux/reservation.h
-!Edrivers/dma-buf/sync_file.c
-!Iinclude/linux/sync_file.h
-       </sect2>
-     </sect1>
-     <sect1><title>Device Drivers DMA Management</title>
-!Edrivers/base/dma-coherent.c
-!Edrivers/base/dma-mapping.c
-     </sect1>
-     <sect1><title>Device Drivers Power Management</title>
-!Edrivers/base/power/main.c
-     </sect1>
-     <sect1><title>Device Drivers ACPI Support</title>
-<!-- Internal functions only
-X!Edrivers/acpi/sleep/main.c
-X!Edrivers/acpi/sleep/wakeup.c
-X!Edrivers/acpi/motherboard.c
-X!Edrivers/acpi/bus.c
--->
-!Edrivers/acpi/scan.c
-!Idrivers/acpi/scan.c
-<!-- No correct structured comments
-X!Edrivers/acpi/pci_bind.c
--->
-     </sect1>
-     <sect1><title>Device drivers PnP support</title>
-!Idrivers/pnp/core.c
-<!-- No correct structured comments
-X!Edrivers/pnp/system.c
- -->
-!Edrivers/pnp/card.c
-!Idrivers/pnp/driver.c
-!Edrivers/pnp/manager.c
-!Edrivers/pnp/support.c
-     </sect1>
-     <sect1><title>Userspace IO devices</title>
-!Edrivers/uio/uio.c
-!Iinclude/linux/uio_driver.h
-     </sect1>
-  </chapter>
-
-  <chapter id="parportdev">
-     <title>Parallel Port Devices</title>
-!Iinclude/linux/parport.h
-!Edrivers/parport/ieee1284.c
-!Edrivers/parport/share.c
-!Idrivers/parport/daisy.c
-  </chapter>
-
-  <chapter id="message_devices">
-	<title>Message-based devices</title>
-     <sect1><title>Fusion message devices</title>
-!Edrivers/message/fusion/mptbase.c
-!Idrivers/message/fusion/mptbase.c
-!Edrivers/message/fusion/mptscsih.c
-!Idrivers/message/fusion/mptscsih.c
-!Idrivers/message/fusion/mptctl.c
-!Idrivers/message/fusion/mptspi.c
-!Idrivers/message/fusion/mptfc.c
-!Idrivers/message/fusion/mptlan.c
-     </sect1>
-  </chapter>
-
-  <chapter id="snddev">
-     <title>Sound Devices</title>
-!Iinclude/sound/core.h
-!Esound/sound_core.c
-!Iinclude/sound/pcm.h
-!Esound/core/pcm.c
-!Esound/core/device.c
-!Esound/core/info.c
-!Esound/core/rawmidi.c
-!Esound/core/sound.c
-!Esound/core/memory.c
-!Esound/core/pcm_memory.c
-!Esound/core/init.c
-!Esound/core/isadma.c
-!Esound/core/control.c
-!Esound/core/pcm_lib.c
-!Esound/core/hwdep.c
-!Esound/core/pcm_native.c
-!Esound/core/memalloc.c
-<!-- FIXME: Removed for now since no structured comments in source
-X!Isound/sound_firmware.c
--->
-  </chapter>
-
-
-  <chapter id="uart16x50">
-     <title>16x50 UART Driver</title>
-!Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250/8250_core.c
-  </chapter>
-
-  <chapter id="fbdev">
-     <title>Frame Buffer Library</title>
-
-     <para>
-       The frame buffer drivers depend heavily on four data structures.
-       These structures are declared in include/linux/fb.h.  They are
-       fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs.
-       The last three can be made available to and from userland.
-     </para>
-
-     <para>
-       fb_info defines the current state of a particular video card.
-       Inside fb_info, there exists a fb_ops structure which is a
-       collection of needed functions to make fbdev and fbcon work.
-       fb_info is only visible to the kernel.
-     </para>
-
-     <para>
-       fb_var_screeninfo is used to describe the features of a video card
-       that are user defined.  With fb_var_screeninfo, things such as
-       depth and the resolution may be defined.
-     </para>
-
-     <para>
-       The next structure is fb_fix_screeninfo. This defines the
-       properties of a card that are created when a mode is set and can't
-       be changed otherwise.  A good example of this is the start of the
-       frame buffer memory.  This "locks" the address of the frame buffer
-       memory, so that it cannot be changed or moved.
-     </para>
-
-     <para>
-       The last structure is fb_monospecs. In the old API, there was
-       little importance for fb_monospecs. This allowed for forbidden things
-       such as setting a mode of 800x600 on a fix frequency monitor. With
-       the new API, fb_monospecs prevents such things, and if used
-       correctly, can prevent a monitor from being cooked.  fb_monospecs
-       will not be useful until kernels 2.5.x.
-     </para>
-
-     <sect1><title>Frame Buffer Memory</title>
-!Edrivers/video/fbdev/core/fbmem.c
-     </sect1>
-<!--
-     <sect1><title>Frame Buffer Console</title>
-X!Edrivers/video/console/fbcon.c
-     </sect1>
--->
-     <sect1><title>Frame Buffer Colormap</title>
-!Edrivers/video/fbdev/core/fbcmap.c
-     </sect1>
-<!-- FIXME:
-  drivers/video/fbgen.c has no docs, which stuffs up the sgml.  Comment
-  out until somebody adds docs.  KAO
-     <sect1><title>Frame Buffer Generic Functions</title>
-X!Idrivers/video/fbgen.c
-     </sect1>
-KAO -->
-     <sect1><title>Frame Buffer Video Mode Database</title>
-!Idrivers/video/fbdev/core/modedb.c
-!Edrivers/video/fbdev/core/modedb.c
-     </sect1>
-     <sect1><title>Frame Buffer Macintosh Video Mode Database</title>
-!Edrivers/video/fbdev/macmodes.c
-     </sect1>
-     <sect1><title>Frame Buffer Fonts</title>
-        <para>
-           Refer to the file lib/fonts/fonts.c for more information.
-        </para>
-<!-- FIXME: Removed for now since no structured comments in source
-X!Ilib/fonts/fonts.c
--->
-     </sect1>
-  </chapter>
-
-  <chapter id="input_subsystem">
-     <title>Input Subsystem</title>
-     <sect1><title>Input core</title>
-!Iinclude/linux/input.h
-!Edrivers/input/input.c
-!Edrivers/input/ff-core.c
-!Edrivers/input/ff-memless.c
-     </sect1>
-     <sect1><title>Multitouch Library</title>
-!Iinclude/linux/input/mt.h
-!Edrivers/input/input-mt.c
-     </sect1>
-     <sect1><title>Polled input devices</title>
-!Iinclude/linux/input-polldev.h
-!Edrivers/input/input-polldev.c
-     </sect1>
-     <sect1><title>Matrix keyboards/keypads</title>
-!Iinclude/linux/input/matrix_keypad.h
-     </sect1>
-     <sect1><title>Sparse keymap support</title>
-!Iinclude/linux/input/sparse-keymap.h
-!Edrivers/input/sparse-keymap.c
-     </sect1>
-  </chapter>
-
-  <chapter id="spi">
-      <title>Serial Peripheral Interface (SPI)</title>
-  <para>
-	SPI is the "Serial Peripheral Interface", widely used with
-	embedded systems because it is a simple and efficient
-	interface:  basically a multiplexed shift register.
-	Its three signal wires hold a clock (SCK, often in the range
-	of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and
-	a "Master In, Slave Out" (MISO) data line.
-	SPI is a full duplex protocol; for each bit shifted out the
-	MOSI line (one per clock) another is shifted in on the MISO line.
-	Those bits are assembled into words of various sizes on the
-	way to and from system memory.
-	An additional chipselect line is usually active-low (nCS);
-	four signals are normally used for each peripheral, plus
-	sometimes an interrupt.
-  </para>
-  <para>
-	The SPI bus facilities listed here provide a generalized
-	interface to declare SPI busses and devices, manage them
-	according to the standard Linux driver model, and perform
-	input/output operations.
-	At this time, only "master" side interfaces are supported,
-	where Linux talks to SPI peripherals and does not implement
-	such a peripheral itself.
-	(Interfaces to support implementing SPI slaves would
-	necessarily look different.)
-  </para>
-  <para>
-	The programming interface is structured around two kinds of driver,
-	and two kinds of device.
-	A "Controller Driver" abstracts the controller hardware, which may
-	be as simple as a set of GPIO pins or as complex as a pair of FIFOs
-	connected to dual DMA engines on the other side of the SPI shift
-	register (maximizing throughput).  Such drivers bridge between
-	whatever bus they sit on (often the platform bus) and SPI, and
-	expose the SPI side of their device as a
-	<structname>struct spi_master</structname>.
-	SPI devices are children of that master, represented as a
-	<structname>struct spi_device</structname> and manufactured from
-	<structname>struct spi_board_info</structname> descriptors which
-	are usually provided by board-specific initialization code.
-	A <structname>struct spi_driver</structname> is called a
-	"Protocol Driver", and is bound to a spi_device using normal
-	driver model calls.
-  </para>
-  <para>
-	The I/O model is a set of queued messages.  Protocol drivers
-	submit one or more <structname>struct spi_message</structname>
-	objects, which are processed and completed asynchronously.
-	(There are synchronous wrappers, however.)  Messages are
-	built from one or more <structname>struct spi_transfer</structname>
-	objects, each of which wraps a full duplex SPI transfer.
-	A variety of protocol tweaking options are needed, because
-	different chips adopt very different policies for how they
-	use the bits transferred with SPI.
-  </para>
-!Iinclude/linux/spi/spi.h
-!Fdrivers/spi/spi.c spi_register_board_info
-!Edrivers/spi/spi.c
-  </chapter>
-
-  <chapter id="i2c">
-     <title>I<superscript>2</superscript>C and SMBus Subsystem</title>
-
-     <para>
-	I<superscript>2</superscript>C (or without fancy typography, "I2C")
-	is an acronym for the "Inter-IC" bus, a simple bus protocol which is
-	widely used where low data rate communications suffice.
-	Since it's also a licensed trademark, some vendors use another
-	name (such as "Two-Wire Interface", TWI) for the same bus.
-	I2C only needs two signals (SCL for clock, SDA for data), conserving
-	board real estate and minimizing signal quality issues.
-	Most I2C devices use seven bit addresses, and bus speeds of up
-	to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
-	found wide use.
-	I2C is a multi-master bus; open drain signaling is used to
-	arbitrate between masters, as well as to handshake and to
-	synchronize clocks from slower clients.
-     </para>
-
-     <para>
-	The Linux I2C programming interfaces support only the master
-	side of bus interactions, not the slave side.
-	The programming interface is structured around two kinds of driver,
-	and two kinds of device.
-	An I2C "Adapter Driver" abstracts the controller hardware; it binds
-	to a physical device (perhaps a PCI device or platform_device) and
-	exposes a <structname>struct i2c_adapter</structname> representing
-	each I2C bus segment it manages.
-	On each I2C bus segment will be I2C devices represented by a
-	<structname>struct i2c_client</structname>.  Those devices will
-	be bound to a <structname>struct i2c_driver</structname>,
-	which should follow the standard Linux driver model.
-	(At this writing, a legacy model is more widely used.)
-	There are functions to perform various I2C protocol operations; at
-	this writing all such functions are usable only from task context.
-     </para>
-
-     <para>
-	The System Management Bus (SMBus) is a sibling protocol.  Most SMBus
-	systems are also I2C conformant.  The electrical constraints are
-	tighter for SMBus, and it standardizes particular protocol messages
-	and idioms.  Controllers that support I2C can also support most
-	SMBus operations, but SMBus controllers don't support all the protocol
-	options that an I2C controller will.
-	There are functions to perform various SMBus protocol operations,
-	either using I2C primitives or by issuing SMBus commands to
-	i2c_adapter devices which don't support those I2C operations.
-     </para>
-
-!Iinclude/linux/i2c.h
-!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
-!Edrivers/i2c/i2c-core.c
-  </chapter>
-
-  <chapter id="hsi">
-     <title>High Speed Synchronous Serial Interface (HSI)</title>
-
-     <para>
-	High Speed Synchronous Serial Interface (HSI) is a
-	serial interface mainly used for connecting application
-	engines (APE) with cellular modem engines (CMT) in cellular
-	handsets.
-
-	HSI provides multiplexing for up to 16 logical channels,
-	low-latency and full duplex communication.
-     </para>
-
-!Iinclude/linux/hsi/hsi.h
-!Edrivers/hsi/hsi_core.c
-  </chapter>
-
-  <chapter id="pwm">
-    <title>Pulse-Width Modulation (PWM)</title>
-    <para>
-      Pulse-width modulation is a modulation technique primarily used to
-      control power supplied to electrical devices.
-    </para>
-    <para>
-      The PWM framework provides an abstraction for providers and consumers
-      of PWM signals. A controller that provides one or more PWM signals is
-      registered as <structname>struct pwm_chip</structname>. Providers are
-      expected to embed this structure in a driver-specific structure. This
-      structure contains fields that describe a particular chip.
-    </para>
-    <para>
-      A chip exposes one or more PWM signal sources, each of which exposed
-      as a <structname>struct pwm_device</structname>. Operations can be
-      performed on PWM devices to control the period, duty cycle, polarity
-      and active state of the signal.
-    </para>
-    <para>
-      Note that PWM devices are exclusive resources: they can always only be
-      used by one consumer at a time.
-    </para>
-!Iinclude/linux/pwm.h
-!Edrivers/pwm/core.c
-  </chapter>
-
-</book>
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 1f345da..5f04234 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -1,5 +1,5 @@
 HOWTO do Linux kernel development
----------------------------------
+=================================
 
 This is the be-all, end-all document on this topic.  It contains
 instructions on how to become a Linux kernel developer and how to learn
@@ -28,6 +28,7 @@
 you plan to do low-level development for that architecture.  Though they
 are not a good substitute for a solid C education and/or years of
 experience, the following books are good for, if anything, reference:
+
  - "The C Programming Language" by Kernighan and Ritchie [Prentice Hall]
  - "Practical C Programming" by Steve Oualline [O'Reilly]
  - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
@@ -64,7 +65,8 @@
 their statements on legal matters.
 
 For common questions and answers about the GPL, please see:
-	http://www.gnu.org/licenses/gpl-faq.html
+
+	https://www.gnu.org/licenses/gpl-faq.html
 
 
 Documentation
@@ -82,96 +84,118 @@
 
 Here is a list of files that are in the kernel source tree that are
 required reading:
+
   README
     This file gives a short background on the Linux kernel and describes
     what is necessary to do to configure and build the kernel.  People
     who are new to the kernel should start here.
 
-  Documentation/Changes
+  :ref:`Documentation/Changes <changes>`
     This file gives a list of the minimum levels of various software
     packages that are necessary to build and run the kernel
     successfully.
 
-  Documentation/CodingStyle
+  :ref:`Documentation/CodingStyle <codingstyle>`
     This describes the Linux kernel coding style, and some of the
     rationale behind it. All new code is expected to follow the
     guidelines in this document. Most maintainers will only accept
     patches if these rules are followed, and many people will only
     review code if it is in the proper style.
 
-  Documentation/SubmittingPatches
-  Documentation/SubmittingDrivers
+  :ref:`Documentation/SubmittingPatches <submittingpatches>` and :ref:`Documentation/SubmittingDrivers <submittingdrivers>`
     These files describe in explicit detail how to successfully create
     and send a patch, including (but not limited to):
+
        - Email contents
        - Email format
        - Who to send it to
+
     Following these rules will not guarantee success (as all patches are
     subject to scrutiny for content and style), but not following them
     will almost always prevent it.
 
     Other excellent descriptions of how to create patches properly are:
+
 	"The Perfect Patch"
-		http://www.ozlabs.org/~akpm/stuff/tpp.txt
+		https://www.ozlabs.org/~akpm/stuff/tpp.txt
+
 	"Linux kernel patch submission format"
 		http://linux.yyz.us/patch-format.html
 
-  Documentation/stable_api_nonsense.txt
+  :ref:`Documentation/stable_api_nonsense.txt <stable_api_nonsense>`
     This file describes the rationale behind the conscious decision to
     not have a stable API within the kernel, including things like:
+
       - Subsystem shim-layers (for compatibility?)
       - Driver portability between Operating Systems.
       - Mitigating rapid change within the kernel source tree (or
 	preventing rapid change)
+
     This document is crucial for understanding the Linux development
     philosophy and is very important for people moving to Linux from
     development on other Operating Systems.
 
-  Documentation/SecurityBugs
+  :ref:`Documentation/SecurityBugs <securitybugs>`
     If you feel you have found a security problem in the Linux kernel,
     please follow the steps in this document to help notify the kernel
     developers, and help solve the issue.
 
-  Documentation/ManagementStyle
+  :ref:`Documentation/ManagementStyle <managementstyle>`
     This document describes how Linux kernel maintainers operate and the
     shared ethos behind their methodologies.  This is important reading
     for anyone new to kernel development (or anyone simply curious about
     it), as it resolves a lot of common misconceptions and confusion
     about the unique behavior of kernel maintainers.
 
-  Documentation/stable_kernel_rules.txt
+  :ref:`Documentation/stable_kernel_rules.txt <stable_kernel_rules>`
     This file describes the rules on how the stable kernel releases
     happen, and what to do if you want to get a change into one of these
     releases.
 
-  Documentation/kernel-docs.txt
+  :ref:`Documentation/kernel-docs.txt <kernel_docs>`
     A list of external documentation that pertains to kernel
     development.  Please consult this list if you do not find what you
     are looking for within the in-kernel documentation.
 
-  Documentation/applying-patches.txt
+  :ref:`Documentation/applying-patches.txt <applying_patches>`
     A good introduction describing exactly what a patch is and how to
     apply it to the different development branches of the kernel.
 
 The kernel also has a large number of documents that can be
-automatically generated from the source code itself.  This includes a
+automatically generated from the source code itself or from
+ReStructuredText markups (ReST), like this one. This includes a
 full description of the in-kernel API, and rules on how to handle
-locking properly.  The documents will be created in the
-Documentation/DocBook/ directory and can be generated as PDF,
-Postscript, HTML, and man pages by running:
+locking properly.
+
+All such documents can be generated as PDF or HTML by running::
+
 	make pdfdocs
-	make psdocs
 	make htmldocs
-	make mandocs
+
 respectively from the main kernel source directory.
 
+The documents that uses ReST markup will be generated at Documentation/output.
+They can also be generated on LaTeX and ePub formats with::
+
+	make latexdocs
+	make epubdocs
+
+Currently, there are some documents written on DocBook that are in
+the process of conversion to ReST. Such documents will be created in the
+Documentation/DocBook/ directory and can be generated also as
+Postscript or man pages by running::
+
+	make psdocs
+	make mandocs
 
 Becoming A Kernel Developer
 ---------------------------
 
 If you do not know anything about Linux kernel development, you should
 look at the Linux KernelNewbies project:
-	http://kernelnewbies.org
+
+	https://kernelnewbies.org
+
 It consists of a helpful mailing list where you can ask almost any type
 of basic kernel development question (make sure to search the archives
 first, before asking something that has already been answered in the
@@ -187,7 +211,9 @@
 If you do not know where you want to start, but you want to look for
 some task to start doing to join into the kernel development community,
 go to the Linux Kernel Janitor's project:
-	http://kernelnewbies.org/KernelJanitors
+
+	https://kernelnewbies.org/KernelJanitors
+
 It is a great place to start.  It describes a list of relatively simple
 problems that need to be cleaned up and fixed within the Linux kernel
 source tree.  Working with the developers in charge of this project, you
@@ -199,7 +225,8 @@
 tree, but need some help getting it in the proper form, the
 kernel-mentors project was created to help you out with this.  It is a
 mailing list, and can be found at:
-	http://selenic.com/mailman/listinfo/kernel-mentors
+
+	https://selenic.com/mailman/listinfo/kernel-mentors
 
 Before making any actual modifications to the Linux kernel code, it is
 imperative to understand how the code in question works.  For this
@@ -209,6 +236,7 @@
 Cross-Reference project, which is able to present source code in a
 self-referential, indexed webpage format. An excellent up-to-date
 repository of the kernel code may be found at:
+
 	http://lxr.free-electrons.com/
 
 
@@ -218,6 +246,7 @@
 Linux kernel development process currently consists of a few different
 main kernel "branches" and lots of different subsystem-specific kernel
 branches.  These different branches are:
+
   - main 4.x kernel tree
   - 4.x.y -stable kernel tree
   - 4.x -git kernel patches
@@ -227,14 +256,15 @@
 4.x kernel tree
 -----------------
 4.x kernels are maintained by Linus Torvalds, and can be found on
-kernel.org in the pub/linux/kernel/v4.x/ directory.  Its development
+https://kernel.org in the pub/linux/kernel/v4.x/ directory.  Its development
 process is as follows:
+
   - As soon as a new kernel is released a two weeks window is open,
     during this period of time maintainers can submit big diffs to
     Linus, usually the patches that have already been included in the
     -next kernel for a few weeks.  The preferred way to submit big changes
     is using git (the kernel's source management tool, more information
-    can be found at http://git-scm.com/) but plain patches are also just
+    can be found at https://git-scm.com/) but plain patches are also just
     fine.
   - After two weeks a -rc1 kernel is released it is now possible to push
     only patches that do not include new features that could affect the
@@ -253,9 +283,10 @@
 
 It is worth mentioning what Andrew Morton wrote on the linux-kernel
 mailing list about kernel releases:
-	"Nobody knows when a kernel will be released, because it's
+
+	*"Nobody knows when a kernel will be released, because it's
 	released according to perceived bug status, not according to a
-	preconceived timeline."
+	preconceived timeline."*
 
 4.x.y -stable kernel tree
 -------------------------
@@ -301,7 +332,7 @@
 Most of these repositories are git trees, but there are also other SCMs
 in use, or patch queues being published as quilt series.  Addresses of
 these subsystem repositories are listed in the MAINTAINERS file.  Many
-of them can be browsed at http://git.kernel.org/.
+of them can be browsed at https://git.kernel.org/.
 
 Before a proposed patch is committed to such a subsystem tree, it is
 subject to review which primarily happens on mailing lists (see the
@@ -310,7 +341,7 @@
 interface which shows patch postings, any comments on a patch or
 revisions to it, and maintainers can mark patches as under review,
 accepted, or rejected.  Most of these patchwork sites are listed at
-http://patchwork.kernel.org/.
+https://patchwork.kernel.org/.
 
 4.x -next kernel tree for integration tests
 -------------------------------------------
@@ -318,7 +349,8 @@
 tree, they need to be integration-tested.  For this purpose, a special
 testing repository exists into which virtually all subsystem trees are
 pulled on an almost daily basis:
-	http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git
+
+	https://git.kernel.org/?p=linux/kernel/git/next/linux-next.git
 
 This way, the -next kernel gives a summary outlook onto what will be
 expected to go into the mainline kernel at the next merge period.
@@ -328,10 +360,11 @@
 Bug Reporting
 -------------
 
-bugzilla.kernel.org is where the Linux kernel developers track kernel
+https://bugzilla.kernel.org is where the Linux kernel developers track kernel
 bugs.  Users are encouraged to report all bugs that they find in this
 tool.  For details on how to use the kernel bugzilla, please see:
-	http://bugzilla.kernel.org/page.cgi?id=faq.html
+
+	https://bugzilla.kernel.org/page.cgi?id=faq.html
 
 The file REPORTING-BUGS in the main kernel source directory has a good
 template for how to report a possible kernel bug, and details what kind
@@ -349,13 +382,14 @@
 bugs is one of the best ways to get merits among other developers, because
 not many people like wasting time fixing other people's bugs.
 
-To work in the already reported bug reports, go to http://bugzilla.kernel.org.
+To work in the already reported bug reports, go to https://bugzilla.kernel.org.
 If you want to be advised of the future bug reports, you can subscribe to the
 bugme-new mailing list (only new bug reports are mailed here) or to the
 bugme-janitor mailing list (every change in the bugzilla is mailed here)
 
-	http://lists.linux-foundation.org/mailman/listinfo/bugme-new
-	http://lists.linux-foundation.org/mailman/listinfo/bugme-janitors
+	https://lists.linux-foundation.org/mailman/listinfo/bugme-new
+
+	https://lists.linux-foundation.org/mailman/listinfo/bugme-janitors
 
 
 
@@ -365,10 +399,14 @@
 As some of the above documents describe, the majority of the core kernel
 developers participate on the Linux Kernel Mailing list.  Details on how
 to subscribe and unsubscribe from the list can be found at:
+
 	http://vger.kernel.org/vger-lists.html#linux-kernel
+
 There are archives of the mailing list on the web in many different
 places.  Use a search engine to find these archives.  For example:
+
 	http://dir.gmane.org/gmane.linux.kernel
+
 It is highly recommended that you search the archives about the topic
 you want to bring up, before you post it to the list. A lot of things
 already discussed in detail are only recorded at the mailing list
@@ -381,11 +419,13 @@
 
 Many of the lists are hosted on kernel.org. Information on them can be
 found at:
+
 	http://vger.kernel.org/vger-lists.html
 
 Please remember to follow good behavioral habits when using the lists.
 Though a bit cheesy, the following URL has some simple guidelines for
 interacting with the list (or any list):
+
 	http://www.albion.com/netiquette/
 
 If multiple people respond to your mail, the CC: list of recipients may
@@ -400,13 +440,14 @@
 writing at the top of the mail.
 
 If you add patches to your mail, make sure they are plain readable text
-as stated in Documentation/SubmittingPatches. Kernel developers don't
-want to deal with attachments or compressed patches; they may want
-to comment on individual lines of your patch, which works only that way.
-Make sure you use a mail program that does not mangle spaces and tab
-characters. A good first test is to send the mail to yourself and try
-to apply your own patch by yourself. If that doesn't work, get your
-mail program fixed or change it until it works.
+as stated in Documentation/SubmittingPatches.
+Kernel developers don't want to deal with
+attachments or compressed patches; they may want to comment on
+individual lines of your patch, which works only that way. Make sure you
+use a mail program that does not mangle spaces and tab characters. A
+good first test is to send the mail to yourself and try to apply your
+own patch by yourself. If that doesn't work, get your mail program fixed
+or change it until it works.
 
 Above all, please remember to show respect to other subscribers.
 
@@ -418,6 +459,7 @@
 there is.  When you submit a patch for acceptance, it will be reviewed
 on its technical merits and those alone.  So, what should you be
 expecting?
+
   - criticism
   - comments
   - requests for change
@@ -432,6 +474,7 @@
 again, sometimes things get lost in the huge volume.
 
 What should you not do?
+
   - expect your patch to be accepted without question
   - become defensive
   - ignore comments
@@ -445,8 +488,8 @@
 toward a solution that is right.
 
 It is normal that the answers to your first patch might simply be a list
-of a dozen things you should correct.  This does _not_ imply that your
-patch will not be accepted, and it is _not_ meant against you
+of a dozen things you should correct.  This does **not** imply that your
+patch will not be accepted, and it is **not** meant against you
 personally.  Simply correct all issues raised against your patch and
 resend it.
 
@@ -457,7 +500,9 @@
 The kernel community works differently than most traditional corporate
 development environments.  Here are a list of things that you can try to
 do to avoid problems:
+
   Good things to say regarding your proposed changes:
+
     - "This solves multiple problems."
     - "This deletes 2000 lines of code."
     - "Here is a patch that explains what I am trying to describe."
@@ -466,6 +511,7 @@
     - "This increases performance on typical machines..."
 
   Bad things you should avoid saying:
+
     - "We did it this way in AIX/ptx/Solaris, so therefore it must be
       good..."
     - "I've being doing this for 20 years, so..."
@@ -527,17 +573,18 @@
    and simplify (or simply re-order) patches before submitting them.
 
 Here is an analogy from kernel developer Al Viro:
-	"Think of a teacher grading homework from a math student.  The
+
+	*"Think of a teacher grading homework from a math student.  The
 	teacher does not want to see the student's trials and errors
 	before they came up with the solution. They want to see the
 	cleanest, most elegant answer.  A good student knows this, and
 	would never submit her intermediate work before the final
-	solution."
+	solution.*
 
-	The same is true of kernel development. The maintainers and
+	*The same is true of kernel development. The maintainers and
 	reviewers do not want to see the thought process behind the
 	solution to the problem one is solving. They want to see a
-	simple and elegant solution."
+	simple and elegant solution."*
 
 It may be challenging to keep the balance between presenting an elegant
 solution and working together with the community and discussing your
@@ -565,6 +612,7 @@
 the text in your email.  This information will become the ChangeLog
 information for the patch, and will be preserved for everyone to see for
 all time.  It should describe the patch completely, containing:
+
   - why the change is necessary
   - the overall design approach in the patch
   - implementation details
@@ -572,12 +620,11 @@
 
 For more details on what this should all look like, please see the
 ChangeLog section of the document:
+
   "The Perfect Patch"
       http://www.ozlabs.org/~akpm/stuff/tpp.txt
 
 
-
-
 All of these things are sometimes very hard to do. It can take years to
 perfect these practices (if at all). It's a continuous process of
 improvement that requires a lot of patience and determination. But
@@ -588,8 +635,9 @@
 
 
 ----------
+
 Thanks to Paolo Ciarrocchi who allowed the "Development Process"
-(http://lwn.net/Articles/94386/) section
+(https://lwn.net/Articles/94386/) section
 to be based on text he had written, and to Randy Dunlap and Gerrit
 Huizenga for some of the list of things you should and should not say.
 Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,
diff --git a/Documentation/Makefile.sphinx b/Documentation/Makefile.sphinx
index 857f1e2..92deea3 100644
--- a/Documentation/Makefile.sphinx
+++ b/Documentation/Makefile.sphinx
@@ -5,6 +5,9 @@
 # You can set these variables from the command line.
 SPHINXBUILD   = sphinx-build
 SPHINXOPTS    =
+SPHINXDIRS    = .
+_SPHINXDIRS   = $(patsubst $(srctree)/Documentation/%/conf.py,%,$(wildcard $(srctree)/Documentation/*/conf.py))
+SPHINX_CONF   = conf.py
 PAPER         =
 BUILDDIR      = $(obj)/output
 
@@ -25,38 +28,62 @@
 
 else # HAVE_SPHINX
 
-# User-friendly check for rst2pdf
-HAVE_RST2PDF := $(shell if python -c "import rst2pdf" >/dev/null 2>&1; then echo 1; else echo 0; fi)
+# User-friendly check for pdflatex
+HAVE_PDFLATEX := $(shell if which xelatex >/dev/null 2>&1; then echo 1; else echo 0; fi)
 
 # Internal variables.
 PAPEROPT_a4     = -D latex_paper_size=a4
 PAPEROPT_letter = -D latex_paper_size=letter
 KERNELDOC       = $(srctree)/scripts/kernel-doc
 KERNELDOC_CONF  = -D kerneldoc_srctree=$(srctree) -D kerneldoc_bin=$(KERNELDOC)
-ALLSPHINXOPTS   = -D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) -d $(BUILDDIR)/.doctrees $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) -c $(srctree)/$(src) $(SPHINXOPTS) $(srctree)/$(src)
+ALLSPHINXOPTS   =  $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) $(SPHINXOPTS)
 # the i18n builder cannot share the environment and doctrees with the others
 I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
 
-quiet_cmd_sphinx = SPHINX  $@
-      cmd_sphinx = BUILDDIR=$(BUILDDIR) $(SPHINXBUILD) -b $2 $(ALLSPHINXOPTS) $(BUILDDIR)/$2
+# commands; the 'cmd' from scripts/Kbuild.include is not *loopable*
+loop_cmd = $(echo-cmd) $(cmd_$(1))
+
+# $2 sphinx builder e.g. "html"
+# $3 name of the build subfolder / e.g. "media", used as:
+#    * dest folder relative to $(BUILDDIR) and
+#    * cache folder relative to $(BUILDDIR)/.doctrees
+# $4 dest subfolder e.g. "man" for man pages at media/man
+# $5 reST source folder relative to $(srctree)/$(src),
+#    e.g. "media" for the linux-tv book-set at ./Documentation/media
+
+quiet_cmd_sphinx = SPHINX  $@ --> file://$(abspath $(BUILDDIR)/$3/$4);
+      cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media all;\
+	BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \
+	$(SPHINXBUILD) \
+	-b $2 \
+	-c $(abspath $(srctree)/$(src)) \
+	-d $(abspath $(BUILDDIR)/.doctrees/$3) \
+	-D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) \
+	$(ALLSPHINXOPTS) \
+	$(abspath $(srctree)/$(src)/$5) \
+	$(abspath $(BUILDDIR)/$3/$4);
 
 htmldocs:
-	$(MAKE) BUILDDIR=$(BUILDDIR) -f $(srctree)/Documentation/media/Makefile $@
-	$(call cmd,sphinx,html)
+	@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
 
-pdfdocs:
-ifeq ($(HAVE_RST2PDF),0)
-	$(warning The Python 'rst2pdf' module was not found. Make sure you have the module installed to produce PDF output.)
+latexdocs:
+ifeq ($(HAVE_PDFLATEX),0)
+	$(warning The 'xelatex' command was not found. Make sure you have it installed and in PATH to produce PDF output.)
 	@echo "  SKIP    Sphinx $@ target."
-else # HAVE_RST2PDF
-	$(call cmd,sphinx,pdf)
-endif # HAVE_RST2PDF
+else # HAVE_PDFLATEX
+	@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,latex,$(var),latex,$(var)))
+endif # HAVE_PDFLATEX
+
+pdfdocs: latexdocs
+ifneq ($(HAVE_PDFLATEX),0)
+	$(foreach var,$(SPHINXDIRS), $(MAKE) PDFLATEX=xelatex LATEXOPTS="-interaction=nonstopmode" -C $(BUILDDIR)/$(var)/latex)
+endif # HAVE_PDFLATEX
 
 epubdocs:
-	$(call cmd,sphinx,epub)
+	@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var)))
 
 xmldocs:
-	$(call cmd,sphinx,xml)
+	@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,xml,$(var),xml,$(var)))
 
 # no-ops for the Sphinx toolchain
 sgmldocs:
@@ -72,7 +99,14 @@
 dochelp:
 	@echo  ' Linux kernel internal documentation in different formats (Sphinx):'
 	@echo  '  htmldocs        - HTML'
+	@echo  '  latexdocs       - LaTeX'
 	@echo  '  pdfdocs         - PDF'
 	@echo  '  epubdocs        - EPUB'
 	@echo  '  xmldocs         - XML'
 	@echo  '  cleandocs       - clean all generated files'
+	@echo
+	@echo  '  make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2'
+	@echo  '  valid values for SPHINXDIRS are: $(_SPHINXDIRS)'
+	@echo
+	@echo  '  make SPHINX_CONF={conf-file} [target] use *additional* sphinx-build'
+	@echo  '  configuration. This is e.g. useful to build with nit-picking config.'
diff --git a/Documentation/ManagementStyle b/Documentation/ManagementStyle
index a211ee8..dea2e66 100644
--- a/Documentation/ManagementStyle
+++ b/Documentation/ManagementStyle
@@ -1,10 +1,12 @@
+.. _managementstyle:
 
-                Linux kernel management style
+Linux kernel management style
+=============================
 
 This is a short document describing the preferred (or made up, depending
 on who you ask) management style for the linux kernel.  It's meant to
 mirror the CodingStyle document to some degree, and mainly written to
-avoid answering (*) the same (or similar) questions over and over again. 
+avoid answering [#f1]_  the same (or similar) questions over and over again.
 
 Management style is very personal and much harder to quantify than
 simple coding style rules, so this document may or may not have anything
@@ -14,50 +16,52 @@
 Btw, when talking about "kernel manager", it's all about the technical
 lead persons, not the people who do traditional management inside
 companies.  If you sign purchase orders or you have any clue about the
-budget of your group, you're almost certainly not a kernel manager. 
-These suggestions may or may not apply to you. 
+budget of your group, you're almost certainly not a kernel manager.
+These suggestions may or may not apply to you.
 
 First off, I'd suggest buying "Seven Habits of Highly Effective
-People", and NOT read it.  Burn it, it's a great symbolic gesture. 
+People", and NOT read it.  Burn it, it's a great symbolic gesture.
 
-(*) This document does so not so much by answering the question, but by
-making it painfully obvious to the questioner that we don't have a clue
-to what the answer is. 
+.. [#f1] This document does so not so much by answering the question, but by
+  making it painfully obvious to the questioner that we don't have a clue
+  to what the answer is.
 
 Anyway, here goes:
 
+.. _decisions:
 
-		Chapter 1: Decisions
+1) Decisions
+------------
 
 Everybody thinks managers make decisions, and that decision-making is
 important.  The bigger and more painful the decision, the bigger the
 manager must be to make it.  That's very deep and obvious, but it's not
-actually true. 
+actually true.
 
-The name of the game is to _avoid_ having to make a decision.  In
+The name of the game is to **avoid** having to make a decision.  In
 particular, if somebody tells you "choose (a) or (b), we really need you
 to decide on this", you're in trouble as a manager.  The people you
 manage had better know the details better than you, so if they come to
 you for a technical decision, you're screwed.  You're clearly not
-competent to make that decision for them. 
+competent to make that decision for them.
 
 (Corollary:if the people you manage don't know the details better than
-you, you're also screwed, although for a totally different reason. 
-Namely that you are in the wrong job, and that _they_ should be managing
-your brilliance instead). 
+you, you're also screwed, although for a totally different reason.
+Namely that you are in the wrong job, and that **they** should be managing
+your brilliance instead).
 
-So the name of the game is to _avoid_ decisions, at least the big and
+So the name of the game is to **avoid** decisions, at least the big and
 painful ones.  Making small and non-consequential decisions is fine, and
 makes you look like you know what you're doing, so what a kernel manager
 needs to do is to turn the big and painful ones into small things where
-nobody really cares. 
+nobody really cares.
 
 It helps to realize that the key difference between a big decision and a
 small one is whether you can fix your decision afterwards.  Any decision
 can be made small by just always making sure that if you were wrong (and
-you _will_ be wrong), you can always undo the damage later by
+you **will** be wrong), you can always undo the damage later by
 backtracking.  Suddenly, you get to be doubly managerial for making
-_two_ inconsequential decisions - the wrong one _and_ the right one. 
+**two** inconsequential decisions - the wrong one **and** the right one.
 
 And people will even see that as true leadership (*cough* bullshit
 *cough*).
@@ -65,10 +69,10 @@
 Thus the key to avoiding big decisions becomes to just avoiding to do
 things that can't be undone.  Don't get ushered into a corner from which
 you cannot escape.  A cornered rat may be dangerous - a cornered manager
-is just pitiful. 
+is just pitiful.
 
 It turns out that since nobody would be stupid enough to ever really let
-a kernel manager have huge fiscal responsibility _anyway_, it's usually
+a kernel manager have huge fiscal responsibility **anyway**, it's usually
 fairly easy to backtrack.  Since you're not going to be able to waste
 huge amounts of money that you might not be able to repay, the only
 thing you can backtrack on is a technical decision, and there
@@ -76,113 +80,118 @@
 incompetent nincompoop, say you're sorry, and undo all the worthless
 work you had people work on for the last year.  Suddenly the decision
 you made a year ago wasn't a big decision after all, since it could be
-easily undone. 
+easily undone.
 
 It turns out that some people have trouble with this approach, for two
 reasons:
+
  - admitting you were an idiot is harder than it looks.  We all like to
    maintain appearances, and coming out in public to say that you were
-   wrong is sometimes very hard indeed. 
+   wrong is sometimes very hard indeed.
  - having somebody tell you that what you worked on for the last year
    wasn't worthwhile after all can be hard on the poor lowly engineers
-   too, and while the actual _work_ was easy enough to undo by just
+   too, and while the actual **work** was easy enough to undo by just
    deleting it, you may have irrevocably lost the trust of that
    engineer.  And remember: "irrevocable" was what we tried to avoid in
    the first place, and your decision ended up being a big one after
-   all. 
+   all.
 
 Happily, both of these reasons can be mitigated effectively by just
 admitting up-front that you don't have a friggin' clue, and telling
 people ahead of the fact that your decision is purely preliminary, and
 might be the wrong thing.  You should always reserve the right to change
-your mind, and make people very _aware_ of that.  And it's much easier
-to admit that you are stupid when you haven't _yet_ done the really
+your mind, and make people very **aware** of that.  And it's much easier
+to admit that you are stupid when you haven't **yet** done the really
 stupid thing.
 
 Then, when it really does turn out to be stupid, people just roll their
-eyes and say "Oops, he did it again".  
+eyes and say "Oops, he did it again".
 
 This preemptive admission of incompetence might also make the people who
 actually do the work also think twice about whether it's worth doing or
-not.  After all, if _they_ aren't certain whether it's a good idea, you
+not.  After all, if **they** aren't certain whether it's a good idea, you
 sure as hell shouldn't encourage them by promising them that what they
 work on will be included.  Make them at least think twice before they
-embark on a big endeavor. 
+embark on a big endeavor.
 
 Remember: they'd better know more about the details than you do, and
 they usually already think they have the answer to everything.  The best
 thing you can do as a manager is not to instill confidence, but rather a
-healthy dose of critical thinking on what they do. 
+healthy dose of critical thinking on what they do.
 
 Btw, another way to avoid a decision is to plaintively just whine "can't
 we just do both?" and look pitiful.  Trust me, it works.  If it's not
 clear which approach is better, they'll eventually figure it out.  The
 answer may end up being that both teams get so frustrated by the
-situation that they just give up. 
+situation that they just give up.
 
 That may sound like a failure, but it's usually a sign that there was
 something wrong with both projects, and the reason the people involved
 couldn't decide was that they were both wrong.  You end up coming up
 smelling like roses, and you avoided yet another decision that you could
-have screwed up on. 
+have screwed up on.
 
 
-		Chapter 2: People
+2) People
+---------
 
 Most people are idiots, and being a manager means you'll have to deal
-with it, and perhaps more importantly, that _they_ have to deal with
-_you_. 
+with it, and perhaps more importantly, that **they** have to deal with
+**you**.
 
 It turns out that while it's easy to undo technical mistakes, it's not
 as easy to undo personality disorders.  You just have to live with
-theirs - and yours. 
+theirs - and yours.
 
 However, in order to prepare yourself as a kernel manager, it's best to
 remember not to burn any bridges, bomb any innocent villagers, or
 alienate too many kernel developers. It turns out that alienating people
 is fairly easy, and un-alienating them is hard. Thus "alienating"
 immediately falls under the heading of "not reversible", and becomes a
-no-no according to Chapter 1.
+no-no according to :ref:`decisions`.
 
 There's just a few simple rules here:
+
  (1) don't call people d*ckheads (at least not in public)
  (2) learn how to apologize when you forgot rule (1)
 
 The problem with #1 is that it's very easy to do, since you can say
-"you're a d*ckhead" in millions of different ways (*), sometimes without
+"you're a d*ckhead" in millions of different ways [#f2]_, sometimes without
 even realizing it, and almost always with a white-hot conviction that
-you are right. 
+you are right.
 
 And the more convinced you are that you are right (and let's face it,
-you can call just about _anybody_ a d*ckhead, and you often _will_ be
-right), the harder it ends up being to apologize afterwards. 
+you can call just about **anybody** a d*ckhead, and you often **will** be
+right), the harder it ends up being to apologize afterwards.
 
 To solve this problem, you really only have two options:
+
  - get really good at apologies
  - spread the "love" out so evenly that nobody really ends up feeling
    like they get unfairly targeted.  Make it inventive enough, and they
-   might even be amused. 
+   might even be amused.
 
 The option of being unfailingly polite really doesn't exist. Nobody will
 trust somebody who is so clearly hiding his true character.
 
-(*) Paul Simon sang "Fifty Ways to Leave Your Lover", because quite
-frankly, "A Million Ways to Tell a Developer He Is a D*ckhead" doesn't
-scan nearly as well.  But I'm sure he thought about it. 
+.. [#f2] Paul Simon sang "Fifty Ways to Leave Your Lover", because quite
+  frankly, "A Million Ways to Tell a Developer He Is a D*ckhead" doesn't
+  scan nearly as well.  But I'm sure he thought about it.
 
 
-		Chapter 3: People II - the Good Kind
+3) People II - the Good Kind
+----------------------------
 
 While it turns out that most people are idiots, the corollary to that is
 sadly that you are one too, and that while we can all bask in the secure
 knowledge that we're better than the average person (let's face it,
 nobody ever believes that they're average or below-average), we should
 also admit that we're not the sharpest knife around, and there will be
-other people that are less of an idiot than you are. 
+other people that are less of an idiot than you are.
 
-Some people react badly to smart people.  Others take advantage of them. 
+Some people react badly to smart people.  Others take advantage of them.
 
-Make sure that you, as a kernel maintainer, are in the second group. 
+Make sure that you, as a kernel maintainer, are in the second group.
 Suck up to them, because they are the people who will make your job
 easier. In particular, they'll be able to make your decisions for you,
 which is what the game is all about.
@@ -191,7 +200,7 @@
 management responsibilities largely become ones of saying "Sounds like a
 good idea - go wild", or "That sounds good, but what about xxx?".  The
 second version in particular is a great way to either learn something
-new about "xxx" or seem _extra_ managerial by pointing out something the
+new about "xxx" or seem **extra** managerial by pointing out something the
 smarter person hadn't thought about.  In either case, you win.
 
 One thing to look out for is to realize that greatness in one area does
@@ -199,47 +208,49 @@
 specific directions, but let's face it, they might be good at what they
 do, and suck at everything else.  The good news is that people tend to
 naturally gravitate back to what they are good at, so it's not like you
-are doing something irreversible when you _do_ prod them in some
+are doing something irreversible when you **do** prod them in some
 direction, just don't push too hard.
 
 
-		Chapter 4: Placing blame
+4) Placing blame
+----------------
 
 Things will go wrong, and people want somebody to blame. Tag, you're it.
 
 It's not actually that hard to accept the blame, especially if people
-kind of realize that it wasn't _all_ your fault.  Which brings us to the
+kind of realize that it wasn't **all** your fault.  Which brings us to the
 best way of taking the blame: do it for another guy. You'll feel good
 for taking the fall, he'll feel good about not getting blamed, and the
 guy who lost his whole 36GB porn-collection because of your incompetence
 will grudgingly admit that you at least didn't try to weasel out of it.
 
 Then make the developer who really screwed up (if you can find him) know
-_in_private_ that he screwed up.  Not just so he can avoid it in the
+**in_private** that he screwed up.  Not just so he can avoid it in the
 future, but so that he knows he owes you one.  And, perhaps even more
 importantly, he's also likely the person who can fix it.  Because, let's
-face it, it sure ain't you. 
+face it, it sure ain't you.
 
-Taking the blame is also why you get to be manager in the first place. 
+Taking the blame is also why you get to be manager in the first place.
 It's part of what makes people trust you, and allow you the potential
 glory, because you're the one who gets to say "I screwed up".  And if
 you've followed the previous rules, you'll be pretty good at saying that
-by now. 
+by now.
 
 
-		Chapter 5: Things to avoid
+5) Things to avoid
+------------------
 
 There's one thing people hate even more than being called "d*ckhead",
 and that is being called a "d*ckhead" in a sanctimonious voice.  The
 first you can apologize for, the second one you won't really get the
 chance.  They likely will no longer be listening even if you otherwise
-do a good job. 
+do a good job.
 
 We all think we're better than anybody else, which means that when
-somebody else puts on airs, it _really_ rubs us the wrong way.  You may
+somebody else puts on airs, it **really** rubs us the wrong way.  You may
 be morally and intellectually superior to everybody around you, but
-don't try to make it too obvious unless you really _intend_ to irritate
-somebody (*). 
+don't try to make it too obvious unless you really **intend** to irritate
+somebody [#f3]_.
 
 Similarly, don't be too polite or subtle about things. Politeness easily
 ends up going overboard and hiding the problem, and as they say, "On the
@@ -251,15 +262,16 @@
 overboard to the point of being ridiculous can drive a point home
 without making it painful to the recipient, who just thinks you're being
 silly.  It can thus help get through the personal mental block we all
-have about criticism. 
+have about criticism.
 
-(*) Hint: internet newsgroups that are not directly related to your work
-are great ways to take out your frustrations at other people. Write
-insulting posts with a sneer just to get into a good flame every once in
-a while, and you'll feel cleansed. Just don't crap too close to home.
+.. [#f3] Hint: internet newsgroups that are not directly related to your work
+  are great ways to take out your frustrations at other people. Write
+  insulting posts with a sneer just to get into a good flame every once in
+  a while, and you'll feel cleansed. Just don't crap too close to home.
 
 
-		Chapter 6: Why me?
+6) Why me?
+----------
 
 Since your main responsibility seems to be to take the blame for other
 peoples mistakes, and make it painfully obvious to everybody else that
@@ -268,9 +280,9 @@
 
 First off, while you may or may not get screaming teenage girls (or
 boys, let's not be judgmental or sexist here) knocking on your dressing
-room door, you _will_ get an immense feeling of personal accomplishment
+room door, you **will** get an immense feeling of personal accomplishment
 for being "in charge".  Never mind the fact that you're really leading
 by trying to keep up with everybody else and running after them as fast
-as you can.  Everybody will still think you're the person in charge. 
+as you can.  Everybody will still think you're the person in charge.
 
 It's a great job if you can hack it.
diff --git a/Documentation/SecurityBugs b/Documentation/SecurityBugs
index a660d49..342d769 100644
--- a/Documentation/SecurityBugs
+++ b/Documentation/SecurityBugs
@@ -1,9 +1,15 @@
+.. _securitybugs:
+
+Security bugs
+=============
+
 Linux kernel developers take security very seriously.  As such, we'd
 like to know when a security bug is found so that it can be fixed and
 disclosed as quickly as possible.  Please report security bugs to the
 Linux kernel security team.
 
 1) Contact
+----------
 
 The Linux kernel security team can be contacted by email at
 <security@kernel.org>.  This is a private list of security officers
@@ -18,6 +24,7 @@
 consent from the reporter unless it has already been made public.
 
 2) Disclosure
+-------------
 
 The goal of the Linux kernel security team is to work with the
 bug submitter to bug resolution as well as disclosure.  We prefer
@@ -33,6 +40,7 @@
 disclosure date to be on the order of 7 days.
 
 3) Non-disclosure agreements
+----------------------------
 
 The Linux kernel security team is not a formal body and therefore unable
 to enter any non-disclosure agreements.
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
index 2b7e32d..894289b 100644
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@@ -1,109 +1,120 @@
+.. _submitchecklist:
+
 Linux Kernel patch submission checklist
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 Here are some basic things that developers should do if they want to see their
 kernel patch submissions accepted more quickly.
 
 These are all above and beyond the documentation that is provided in
-Documentation/SubmittingPatches and elsewhere regarding submitting Linux
-kernel patches.
+:ref:`Documentation/SubmittingPatches <submittingpatches>`
+and elsewhere regarding submitting Linux kernel patches.
 
 
-1: If you use a facility then #include the file that defines/declares
+1) If you use a facility then #include the file that defines/declares
    that facility.  Don't depend on other header files pulling in ones
    that you use.
 
-2: Builds cleanly with applicable or modified CONFIG options =y, =m, and
-   =n.  No gcc warnings/errors, no linker warnings/errors.
+2) Builds cleanly:
 
-2b: Passes allnoconfig, allmodconfig
+  a) with applicable or modified ``CONFIG`` options ``=y``, ``=m``, and
+     ``=n``.  No ``gcc`` warnings/errors, no linker warnings/errors.
 
-2c: Builds successfully when using O=builddir
+  b) Passes ``allnoconfig``, ``allmodconfig``
 
-3: Builds on multiple CPU architectures by using local cross-compile tools
+  c) Builds successfully when using ``O=builddir``
+
+3) Builds on multiple CPU architectures by using local cross-compile tools
    or some other build farm.
 
-4: ppc64 is a good architecture for cross-compilation checking because it
-   tends to use `unsigned long' for 64-bit quantities.
+4) ppc64 is a good architecture for cross-compilation checking because it
+   tends to use ``unsigned long`` for 64-bit quantities.
 
-5: Check your patch for general style as detailed in
-   Documentation/CodingStyle.  Check for trivial violations with the
-   patch style checker prior to submission (scripts/checkpatch.pl).
+5) Check your patch for general style as detailed in
+   :ref:`Documentation/CodingStyle <codingstyle>`.
+   Check for trivial violations with the patch style checker prior to
+   submission (``scripts/checkpatch.pl``).
    You should be able to justify all violations that remain in
    your patch.
 
-6: Any new or modified CONFIG options don't muck up the config menu.
+6) Any new or modified ``CONFIG`` options don't muck up the config menu.
 
-7: All new Kconfig options have help text.
+7) All new ``Kconfig`` options have help text.
 
-8: Has been carefully reviewed with respect to relevant Kconfig
+8) Has been carefully reviewed with respect to relevant ``Kconfig``
    combinations.  This is very hard to get right with testing -- brainpower
    pays off here.
 
-9: Check cleanly with sparse.
+9) Check cleanly with sparse.
 
-10: Use 'make checkstack' and 'make namespacecheck' and fix any problems
-    that they find.  Note: checkstack does not point out problems explicitly,
-    but any one function that uses more than 512 bytes on the stack is a
-    candidate for change.
+10) Use ``make checkstack`` and ``make namespacecheck`` and fix any problems
+    that they find.
 
-11: Include kernel-doc to document global kernel APIs.  (Not required for
-    static functions, but OK there also.) Use 'make htmldocs' or 'make
-    mandocs' to check the kernel-doc and fix any issues.
+    .. note::
 
-12: Has been tested with CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT,
-    CONFIG_DEBUG_SLAB, CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES,
-    CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_ATOMIC_SLEEP, CONFIG_PROVE_RCU
-    and CONFIG_DEBUG_OBJECTS_RCU_HEAD all simultaneously enabled.
+       ``checkstack`` does not point out problems explicitly,
+       but any one function that uses more than 512 bytes on the stack is a
+       candidate for change.
 
-13: Has been build- and runtime tested with and without CONFIG_SMP and
-    CONFIG_PREEMPT.
+11) Include :ref:`kernel-doc <kernel_doc>` to document global  kernel APIs.
+    (Not required for static functions, but OK there also.) Use
+    ``make htmldocs`` or ``make pdfdocs`` to check the
+    :ref:`kernel-doc <kernel_doc>` and fix any issues.
 
-14: If the patch affects IO/Disk, etc: has been tested with and without
-    CONFIG_LBDAF.
+12) Has been tested with ``CONFIG_PREEMPT``, ``CONFIG_DEBUG_PREEMPT``,
+    ``CONFIG_DEBUG_SLAB``, ``CONFIG_DEBUG_PAGEALLOC``, ``CONFIG_DEBUG_MUTEXES``,
+    ``CONFIG_DEBUG_SPINLOCK``, ``CONFIG_DEBUG_ATOMIC_SLEEP``,
+    ``CONFIG_PROVE_RCU`` and ``CONFIG_DEBUG_OBJECTS_RCU_HEAD`` all
+    simultaneously enabled.
 
-15: All codepaths have been exercised with all lockdep features enabled.
+13) Has been build- and runtime tested with and without ``CONFIG_SMP`` and
+    ``CONFIG_PREEMPT.``
 
-16: All new /proc entries are documented under Documentation/
+14) If the patch affects IO/Disk, etc: has been tested with and without
+    ``CONFIG_LBDAF.``
 
-17: All new kernel boot parameters are documented in
-    Documentation/kernel-parameters.txt.
+15) All codepaths have been exercised with all lockdep features enabled.
 
-18: All new module parameters are documented with MODULE_PARM_DESC()
+16) All new ``/proc`` entries are documented under ``Documentation/``
 
-19: All new userspace interfaces are documented in Documentation/ABI/.
-    See Documentation/ABI/README for more information.
+17) All new kernel boot parameters are documented in
+    ``Documentation/kernel-parameters.txt``.
+
+18) All new module parameters are documented with ``MODULE_PARM_DESC()``
+
+19) All new userspace interfaces are documented in ``Documentation/ABI/``.
+    See ``Documentation/ABI/README`` for more information.
     Patches that change userspace interfaces should be CCed to
     linux-api@vger.kernel.org.
 
-20: Check that it all passes `make headers_check'.
+20) Check that it all passes ``make headers_check``.
 
-21: Has been checked with injection of at least slab and page-allocation
-    failures.  See Documentation/fault-injection/.
+21) Has been checked with injection of at least slab and page-allocation
+    failures.  See ``Documentation/fault-injection/``.
 
     If the new code is substantial, addition of subsystem-specific fault
     injection might be appropriate.
 
-22: Newly-added code has been compiled with `gcc -W' (use "make
-    EXTRA_CFLAGS=-W").  This will generate lots of noise, but is good for
-    finding bugs like "warning: comparison between signed and unsigned".
+22) Newly-added code has been compiled with ``gcc -W`` (use
+    ``make EXTRA_CFLAGS=-W``).  This will generate lots of noise, but is good
+    for finding bugs like "warning: comparison between signed and unsigned".
 
-23: Tested after it has been merged into the -mm patchset to make sure
+23) Tested after it has been merged into the -mm patchset to make sure
     that it still works with all of the other queued patches and various
     changes in the VM, VFS, and other subsystems.
 
-24: All memory barriers {e.g., barrier(), rmb(), wmb()} need a comment in the
-    source code that explains the logic of what they are doing and why.
+24) All memory barriers {e.g., ``barrier()``, ``rmb()``, ``wmb()``} need a
+    comment in the source code that explains the logic of what they are doing
+    and why.
 
-25: If any ioctl's are added by the patch, then also update
-    Documentation/ioctl/ioctl-number.txt.
+25) If any ioctl's are added by the patch, then also update
+    ``Documentation/ioctl/ioctl-number.txt``.
 
-26: If your modified source code depends on or uses any of the kernel
-    APIs or features that are related to the following kconfig symbols,
-    then test multiple builds with the related kconfig symbols disabled
-    and/or =m (if that option is available) [not all of these at the
+26) If your modified source code depends on or uses any of the kernel
+    APIs or features that are related to the following ``Kconfig`` symbols,
+    then test multiple builds with the related ``Kconfig`` symbols disabled
+    and/or ``=m`` (if that option is available) [not all of these at the
     same time, just various/random combinations of them]:
 
-    CONFIG_SMP, CONFIG_SYSFS, CONFIG_PROC_FS, CONFIG_INPUT, CONFIG_PCI,
-    CONFIG_BLOCK, CONFIG_PM, CONFIG_MAGIC_SYSRQ,
-    CONFIG_NET, CONFIG_INET=n (but latter with CONFIG_NET=y)
+    ``CONFIG_SMP``, ``CONFIG_SYSFS``, ``CONFIG_PROC_FS``, ``CONFIG_INPUT``, ``CONFIG_PCI``, ``CONFIG_BLOCK``, ``CONFIG_PM``, ``CONFIG_MAGIC_SYSRQ``,
+    ``CONFIG_NET``, ``CONFIG_INET=n`` (but latter with ``CONFIG_NET=y``).
diff --git a/Documentation/SubmittingDrivers b/Documentation/SubmittingDrivers
index 31d3726..252b77a 100644
--- a/Documentation/SubmittingDrivers
+++ b/Documentation/SubmittingDrivers
@@ -1,5 +1,7 @@
+.. _submittingdrivers:
+
 Submitting Drivers For The Linux Kernel
----------------------------------------
+=======================================
 
 This document is intended to explain how to submit device drivers to the
 various kernel trees. Note that if you are interested in video card drivers
@@ -38,42 +40,48 @@
 	maintainer does not respond or you cannot find the appropriate
 	maintainer then please contact Willy Tarreau <w@1wt.eu>.
 
-Linux 2.6:
+Linux 2.6 and upper:
 	The same rules apply as 2.4 except that you should follow linux-kernel
-	to track changes in API's. The final contact point for Linux 2.6
+	to track changes in API's. The final contact point for Linux 2.6+
 	submissions is Andrew Morton.
 
 What Criteria Determine Acceptance
 ----------------------------------
 
-Licensing:	The code must be released to us under the
+Licensing:
+		The code must be released to us under the
 		GNU General Public License. We don't insist on any kind
 		of exclusive GPL licensing, and if you wish the driver
 		to be useful to other communities such as BSD you may well
 		wish to release under multiple licenses.
 		See accepted licenses at include/linux/module.h
 
-Copyright:	The copyright owner must agree to use of GPL.
+Copyright:
+		The copyright owner must agree to use of GPL.
 		It's best if the submitter and copyright owner
 		are the same person/entity. If not, the name of
 		the person/entity authorizing use of GPL should be
 		listed in case it's necessary to verify the will of
 		the copyright owner.
 
-Interfaces:	If your driver uses existing interfaces and behaves like
+Interfaces:
+		If your driver uses existing interfaces and behaves like
 		other drivers in the same class it will be much more likely
 		to be accepted than if it invents gratuitous new ones.
 		If you need to implement a common API over Linux and NT
 		drivers do it in userspace.
 
-Code:		Please use the Linux style of code formatting as documented
-		in Documentation/CodingStyle. If you have sections of code
+Code:
+		Please use the Linux style of code formatting as documented
+		in :ref:`Documentation/CodingStyle <codingStyle>`.
+		If you have sections of code
 		that need to be in other formats, for example because they
 		are shared with a windows driver kit and you want to
 		maintain them just once separate them out nicely and note
 		this fact.
 
-Portability:	Pointers are not always 32bits, not all computers are little
+Portability:
+		Pointers are not always 32bits, not all computers are little
 		endian, people do not all have floating point and you
 		shouldn't use inline x86 assembler in your driver without
 		careful thought. Pure x86 drivers generally are not popular.
@@ -81,12 +89,14 @@
 		but it is easy to make sure the code can easily be made
 		portable.
 
-Clarity:	It helps if anyone can see how to fix the driver. It helps
+Clarity:
+		It helps if anyone can see how to fix the driver. It helps
 		you because you get patches not bug reports. If you submit a
 		driver that intentionally obfuscates how the hardware works
 		it will go in the bitbucket.
 
-PM support:	Since Linux is used on many portable and desktop systems, your
+PM support:
+		Since Linux is used on many portable and desktop systems, your
 		driver is likely to be used on such a system and therefore it
 		should support basic power management by implementing, if
 		necessary, the .suspend and .resume methods used during the
@@ -101,7 +111,8 @@
 		complete overview of the power management issues related to
 		drivers see Documentation/power/devices.txt .
 
-Control:	In general if there is active maintenance of a driver by
+Control:
+		In general if there is active maintenance of a driver by
 		the author then patches will be redirected to them unless
 		they are totally obvious and without need of checking.
 		If you want to be the contact and update point for the
@@ -111,13 +122,15 @@
 What Criteria Do Not Determine Acceptance
 -----------------------------------------
 
-Vendor:		Being the hardware vendor and maintaining the driver is
+Vendor:
+		Being the hardware vendor and maintaining the driver is
 		often a good thing. If there is a stable working driver from
 		other people already in the tree don't expect 'we are the
 		vendor' to get your driver chosen. Ideally work with the
 		existing driver author to build a single perfect driver.
 
-Author:		It doesn't matter if a large Linux company wrote the driver,
+Author:
+		It doesn't matter if a large Linux company wrote the driver,
 		or you did. Nobody has any special access to the kernel
 		tree. Anyone who tells you otherwise isn't telling the
 		whole story.
@@ -127,8 +140,10 @@
 ---------
 
 Linux kernel master tree:
-	ftp.??.kernel.org:/pub/linux/kernel/...
-	?? == your country code, such as "us", "uk", "fr", etc.
+	ftp.\ *country_code*\ .kernel.org:/pub/linux/kernel/...
+
+	where *country_code* == your country code, such as
+	**us**, **uk**, **fr**, etc.
 
 	http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git
 
@@ -141,14 +156,19 @@
 
 LWN.net:
 	Weekly summary of kernel development activity - http://lwn.net/
+
 	2.6 API changes:
+
 		http://lwn.net/Articles/2.6-kernel-api/
+
 	Porting drivers from prior kernels to 2.6:
+
 		http://lwn.net/Articles/driver-porting/
 
 KernelNewbies:
 	Documentation and assistance for new kernel programmers
-	http://kernelnewbies.org/
+
+		http://kernelnewbies.org/
 
 Linux USB project:
 	http://www.linux-usb.org/
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 8c79f1d..36f1ded 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -1,9 +1,7 @@
+.. _submittingpatches:
 
-	How to Get Your Change Into the Linux Kernel
-		or
-	Care And Operation Of Your Linus Torvalds
-
-
+How to Get Your Change Into the Linux Kernel or Care And Operation Of Your Linus Torvalds
+=========================================================================================
 
 For a person or company who wishes to submit a change to the Linux
 kernel, the process can sometimes be daunting if you're not familiar
@@ -12,57 +10,59 @@
 
 This document contains a large number of suggestions in a relatively terse
 format.  For detailed information on how the kernel development process
-works, see Documentation/development-process.  Also, read
-Documentation/SubmitChecklist for a list of items to check before
+works, see :ref:`Documentation/development-process <development_process_main>`.
+Also, read :ref:`Documentation/SubmitChecklist <submitchecklist>`
+for a list of items to check before
 submitting code.  If you are submitting a driver, also read
-Documentation/SubmittingDrivers; for device tree binding patches, read
+:ref:`Documentation/SubmittingDrivers <submittingdrivers>`;
+for device tree binding patches, read
 Documentation/devicetree/bindings/submitting-patches.txt.
 
-Many of these steps describe the default behavior of the git version
-control system; if you use git to prepare your patches, you'll find much
+Many of these steps describe the default behavior of the ``git`` version
+control system; if you use ``git`` to prepare your patches, you'll find much
 of the mechanical work done for you, though you'll still need to prepare
-and document a sensible set of patches.  In general, use of git will make
+and document a sensible set of patches.  In general, use of ``git`` will make
 your life as a kernel developer easier.
 
---------------------------------------------
-SECTION 1 - CREATING AND SENDING YOUR CHANGE
---------------------------------------------
+Creating and Sending your Change
+********************************
 
 
 0) Obtain a current source tree
 -------------------------------
 
 If you do not have a repository with the current kernel source handy, use
-git to obtain one.  You'll want to start with the mainline repository,
-which can be grabbed with:
+``git`` to obtain one.  You'll want to start with the mainline repository,
+which can be grabbed with::
 
-  git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 
+  git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
 
 Note, however, that you may not want to develop against the mainline tree
 directly.  Most subsystem maintainers run their own trees and want to see
-patches prepared against those trees.  See the "T:" entry for the subsystem
+patches prepared against those trees.  See the **T:** entry for the subsystem
 in the MAINTAINERS file to find that tree, or simply ask the maintainer if
 the tree is not listed there.
 
 It is still possible to download kernel releases via tarballs (as described
 in the next section), but that is the hard way to do kernel development.
 
-1) "diff -up"
-------------
+1) ``diff -up``
+---------------
 
-If you must generate your patches by hand, use "diff -up" or "diff -uprN"
+If you must generate your patches by hand, use ``diff -up`` or ``diff -uprN``
 to create patches.  Git generates patches in this form by default; if
-you're using git, you can skip this section entirely.
+you're using ``git``, you can skip this section entirely.
 
 All changes to the Linux kernel occur in the form of patches, as
-generated by diff(1).  When creating your patch, make sure to create it
-in "unified diff" format, as supplied by the '-u' argument to diff(1).
-Also, please use the '-p' argument which shows which C function each
-change is in - that makes the resultant diff a lot easier to read.
+generated by :manpage:`diff(1)`.  When creating your patch, make sure to
+create it in "unified diff" format, as supplied by the ``-u`` argument
+to :manpage:`diff(1)`.
+Also, please use the ``-p`` argument which shows which C function each
+change is in - that makes the resultant ``diff`` a lot easier to read.
 Patches should be based in the root kernel source directory,
 not in any lower subdirectory.
 
-To create a patch for a single file, it is often sufficient to do:
+To create a patch for a single file, it is often sufficient to do::
 
 	SRCTREE= linux
 	MYFILE=  drivers/net/mydriver.c
@@ -74,8 +74,8 @@
 	diff -up $SRCTREE/$MYFILE{.orig,} > /tmp/patch
 
 To create a patch for multiple files, you should unpack a "vanilla",
-or unmodified kernel source tree, and generate a diff against your
-own source tree.  For example:
+or unmodified kernel source tree, and generate a ``diff`` against your
+own source tree.  For example::
 
 	MYSRC= /devel/linux
 
@@ -84,27 +84,27 @@
 	diff -uprN -X linux-3.19-vanilla/Documentation/dontdiff \
 		linux-3.19-vanilla $MYSRC > /tmp/patch
 
-"dontdiff" is a list of files which are generated by the kernel during
-the build process, and should be ignored in any diff(1)-generated
+``dontdiff`` is a list of files which are generated by the kernel during
+the build process, and should be ignored in any :manpage:`diff(1)`-generated
 patch.
 
 Make sure your patch does not include any extra files which do not
 belong in a patch submission.  Make sure to review your patch -after-
-generating it with diff(1), to ensure accuracy.
+generating it with :manpage:`diff(1)`, to ensure accuracy.
 
 If your changes produce a lot of deltas, you need to split them into
-individual patches which modify things in logical stages; see section
-#3.  This will facilitate review by other kernel developers,
+individual patches which modify things in logical stages; see
+:ref:`split_changes`.  This will facilitate review by other kernel developers,
 very important if you want your patch accepted.
 
-If you're using git, "git rebase -i" can help you with this process.  If
-you're not using git, quilt <http://savannah.nongnu.org/projects/quilt>
+If you're using ``git``, ``git rebase -i`` can help you with this process.  If
+you're not using ``git``, ``quilt`` <http://savannah.nongnu.org/projects/quilt>
 is another popular alternative.
 
+.. _describe_changes:
 
-
-2) Describe your changes.
--------------------------
+2) Describe your changes
+------------------------
 
 Describe your problem.  Whether your patch is a one-line bug fix or
 5000 lines of a new feature, there must be an underlying problem that
@@ -137,11 +137,11 @@
 
 The maintainer will thank you if you write your patch description in a
 form which can be easily pulled into Linux's source code management
-system, git, as a "commit log".  See #15, below.
+system, ``git``, as a "commit log".  See :ref:`explicit_in_reply_to`.
 
 Solve only one problem per patch.  If your description starts to get
 long, that's a sign that you probably need to split up your patch.
-See #3, next.
+See :ref:`split_changes`.
 
 When you submit or resubmit a patch or patch series, include the
 complete patch description and justification for it.  Don't just
@@ -160,7 +160,7 @@
 If the patch fixes a logged bug entry, refer to that bug entry by
 number and URL.  If the patch follows from a mailing list discussion,
 give a URL to the mailing list archive; use the https://lkml.kernel.org/
-redirector with a Message-Id, to ensure that the links cannot become
+redirector with a ``Message-Id``, to ensure that the links cannot become
 stale.
 
 However, try to make your explanation understandable without external
@@ -171,7 +171,7 @@
 If you want to refer to a specific commit, don't just refer to the
 SHA-1 ID of the commit. Please also include the oneline summary of
 the commit, to make it easier for reviewers to know what it is about.
-Example:
+Example::
 
 	Commit e21d2170f36602ae2708 ("video: remove unnecessary
 	platform_set_drvdata()") removed the unnecessary
@@ -185,23 +185,25 @@
 change five years from now.
 
 If your patch fixes a bug in a specific commit, e.g. you found an issue using
-git-bisect, please use the 'Fixes:' tag with the first 12 characters of the
-SHA-1 ID, and the one line summary.  For example:
+``git bisect``, please use the 'Fixes:' tag with the first 12 characters of
+the SHA-1 ID, and the one line summary.  For example::
 
 	Fixes: e21d2170f366 ("video: remove unnecessary platform_set_drvdata()")
 
-The following git-config settings can be used to add a pretty format for
-outputting the above style in the git log or git show commands
+The following ``git config`` settings can be used to add a pretty format for
+outputting the above style in the ``git log`` or ``git show`` commands::
 
 	[core]
 		abbrev = 12
 	[pretty]
 		fixes = Fixes: %h (\"%s\")
 
-3) Separate your changes.
--------------------------
+.. _split_changes:
 
-Separate each _logical change_ into a separate patch.
+3) Separate your changes
+------------------------
+
+Separate each **logical change** into a separate patch.
 
 For example, if your changes include both bug fixes and performance
 enhancements for a single driver, separate those changes into two
@@ -217,12 +219,12 @@
 on its own merits.
 
 If one patch depends on another patch in order for a change to be
-complete, that is OK.  Simply note "this patch depends on patch X"
+complete, that is OK.  Simply note **"this patch depends on patch X"**
 in your patch description.
 
 When dividing your change into a series of patches, take special care to
 ensure that the kernel builds and runs properly after each patch in the
-series.  Developers using "git bisect" to track down a problem can end up
+series.  Developers using ``git bisect`` to track down a problem can end up
 splitting your patch series at any point; they will not thank you if you
 introduce bugs in the middle.
 
@@ -231,11 +233,13 @@
 
 
 
-4) Style-check your changes.
-----------------------------
+4) Style-check your changes
+---------------------------
 
 Check your patch for basic style violations, details of which can be
-found in Documentation/CodingStyle.  Failure to do so simply wastes
+found in
+:ref:`Documentation/CodingStyle <codingstyle>`.
+Failure to do so simply wastes
 the reviewers time and will get your patch rejected, probably
 without even being read.
 
@@ -260,8 +264,8 @@
 patch.
 
 
-5) Select the recipients for your patch.
-----------------------------------------
+5) Select the recipients for your patch
+---------------------------------------
 
 You should always copy the appropriate subsystem maintainer(s) on any patch
 to code that they maintain; look through the MAINTAINERS file and the
@@ -295,13 +299,14 @@
 obviously, the patch should not be sent to any public lists.
 
 Patches that fix a severe bug in a released kernel should be directed
-toward the stable maintainers by putting a line like this:
+toward the stable maintainers by putting a line like this::
 
   Cc: stable@vger.kernel.org
 
 into the sign-off area of your patch (note, NOT an email recipient).  You
-should also read Documentation/stable_kernel_rules.txt in addition to this
-file.
+should also read
+:ref:`Documentation/stable_kernel_rules.txt <stable_kernel_rules>`
+in addition to this file.
 
 Note, however, that some subsystem maintainers want to come to their own
 conclusions on which patches should go to the stable trees.  The networking
@@ -312,28 +317,30 @@
 maintainer (as listed in the MAINTAINERS file) a man-pages patch, or at
 least a notification of the change, so that some information makes its way
 into the manual pages.  User-space API changes should also be copied to
-linux-api@vger.kernel.org. 
+linux-api@vger.kernel.org.
 
 For small patches you may want to CC the Trivial Patch Monkey
 trivial@kernel.org which collects "trivial" patches. Have a look
 into the MAINTAINERS file for its current manager.
+
 Trivial patches must qualify for one of the following rules:
- Spelling fixes in documentation
- Spelling fixes for errors which could break grep(1)
- Warning fixes (cluttering with useless warnings is bad)
- Compilation fixes (only if they are actually correct)
- Runtime fixes (only if they actually fix things)
- Removing use of deprecated functions/macros
- Contact detail and documentation fixes
- Non-portable code replaced by portable code (even in arch-specific,
- since people copy, as long as it's trivial)
- Any fix by the author/maintainer of the file (ie. patch monkey
- in re-transmission mode)
+
+- Spelling fixes in documentation
+- Spelling fixes for errors which could break :manpage:`grep(1)`
+- Warning fixes (cluttering with useless warnings is bad)
+- Compilation fixes (only if they are actually correct)
+- Runtime fixes (only if they actually fix things)
+- Removing use of deprecated functions/macros
+- Contact detail and documentation fixes
+- Non-portable code replaced by portable code (even in arch-specific,
+  since people copy, as long as it's trivial)
+- Any fix by the author/maintainer of the file (ie. patch monkey
+  in re-transmission mode)
 
 
 
-6) No MIME, no links, no compression, no attachments.  Just plain text.
------------------------------------------------------------------------
+6) No MIME, no links, no compression, no attachments.  Just plain text
+----------------------------------------------------------------------
 
 Linus and other kernel developers need to be able to read and comment
 on the changes you are submitting.  It is important for a kernel
@@ -341,8 +348,11 @@
 tools, so that they may comment on specific portions of your code.
 
 For this reason, all patches should be submitted by e-mail "inline".
-WARNING:  Be wary of your editor's word-wrap corrupting your patch,
-if you choose to cut-n-paste your patch.
+
+.. warning::
+
+  Be wary of your editor's word-wrap corrupting your patch,
+  if you choose to cut-n-paste your patch.
 
 Do not attach the patch as a MIME attachment, compressed or not.
 Many popular e-mail applications will not always transmit a MIME
@@ -353,11 +363,12 @@
 Exception:  If your mailer is mangling patches then someone may ask
 you to re-send them using MIME.
 
-See Documentation/email-clients.txt for hints about configuring
-your e-mail client so that it sends your patches untouched.
+See :ref:`Documentation/email-clients.txt <email_clients>`
+for hints about configuring your e-mail client so that it sends your patches
+untouched.
 
-7) E-mail size.
----------------
+7) E-mail size
+--------------
 
 Large changes are not appropriate for mailing lists, and some
 maintainers.  If your patch, uncompressed, exceeds 300 kB in size,
@@ -366,8 +377,8 @@
 that if your patch exceeds 300 kB, it almost certainly needs to be broken up
 anyway.
 
-8) Respond to review comments.
-------------------------------
+8) Respond to review comments
+-----------------------------
 
 Your patch will almost certainly get comments from reviewers on ways in
 which the patch can be improved.  You must respond to those comments;
@@ -382,8 +393,8 @@
 politely and address the problems they have pointed out.
 
 
-9) Don't get discouraged - or impatient.
-----------------------------------------
+9) Don't get discouraged - or impatient
+---------------------------------------
 
 After you have submitted your change, be patient and wait.  Reviewers are
 busy people and may not get to your patch right away.
@@ -419,9 +430,10 @@
 pass it on as an open-source patch.  The rules are pretty simple: if you
 can certify the below:
 
-        Developer's Certificate of Origin 1.1
+Developer's Certificate of Origin 1.1
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-        By making a contribution to this project, I certify that:
+By making a contribution to this project, I certify that:
 
         (a) The contribution was created in whole or in part by me and I
             have the right to submit it under the open source license
@@ -445,7 +457,7 @@
             maintained indefinitely and may be redistributed consistent with
             this project or the open source license(s) involved.
 
-then you just add a line saying
+then you just add a line saying::
 
 	Signed-off-by: Random J Developer <random@developer.example.org>
 
@@ -466,7 +478,7 @@
 the nature of your changes. While there is nothing mandatory about this, it
 seems like prepending the description with your mail and/or name, all
 enclosed in square brackets, is noticeable enough to make it obvious that
-you are responsible for last-minute changes. Example :
+you are responsible for last-minute changes. Example::
 
 	Signed-off-by: Random J Developer <random@developer.example.org>
 	[lucky@maintainer.example.org: struct foo moved from foo.c to foo.h]
@@ -481,15 +493,15 @@
 Special note to back-porters: It seems to be a common and useful practice
 to insert an indication of the origin of a patch at the top of the commit
 message (just after the subject line) to facilitate tracking. For instance,
-here's what we see in a 3.x-stable release:
+here's what we see in a 3.x-stable release::
 
-Date:   Tue Oct 7 07:26:38 2014 -0400
+  Date:   Tue Oct 7 07:26:38 2014 -0400
 
     libata: Un-break ATA blacklist
 
     commit 1c40279960bcd7d52dbdf1d466b20d24b99176c8 upstream.
 
-And here's what might appear in an older kernel once a patch is backported:
+And here's what might appear in an older kernel once a patch is backported::
 
     Date:   Tue May 13 22:12:27 2008 +0200
 
@@ -529,7 +541,7 @@
 list archives.
 
 If a person has had the opportunity to comment on a patch, but has not
-provided such comments, you may optionally add a "Cc:" tag to the patch.
+provided such comments, you may optionally add a ``Cc:`` tag to the patch.
 This is the only tag which might be added without an explicit action by the
 person it names - but it should indicate that this person was copied on the
 patch.  This tag documents that potentially interested parties
@@ -552,11 +564,12 @@
 Reviewed-by:, instead, indicates that the patch has been reviewed and found
 acceptable according to the Reviewer's Statement:
 
-	Reviewer's statement of oversight
+Reviewer's statement of oversight
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-	By offering my Reviewed-by: tag, I state that:
+By offering my Reviewed-by: tag, I state that:
 
- 	 (a) I have carried out a technical review of this patch to
+	 (a) I have carried out a technical review of this patch to
 	     evaluate its appropriateness and readiness for inclusion into
 	     the mainline kernel.
 
@@ -594,24 +607,25 @@
 is used to make it easy to determine where a bug originated, which can help
 review a bug fix. This tag also assists the stable kernel team in determining
 which stable kernel versions should receive your fix. This is the preferred
-method for indicating a bug fixed by the patch. See #2 above for more details.
+method for indicating a bug fixed by the patch. See :ref:`describe_changes`
+for more details.
 
 
 14) The canonical patch format
 ------------------------------
 
 This section describes how the patch itself should be formatted.  Note
-that, if you have your patches stored in a git repository, proper patch
-formatting can be had with "git format-patch".  The tools cannot create
+that, if you have your patches stored in a ``git`` repository, proper patch
+formatting can be had with ``git format-patch``.  The tools cannot create
 the necessary text, though, so read the instructions below anyway.
 
-The canonical patch subject line is:
+The canonical patch subject line is::
 
     Subject: [PATCH 001/123] subsystem: summary phrase
 
 The canonical patch message body contains the following:
 
-  - A "from" line specifying the patch author (only needed if the person
+  - A ``from`` line specifying the patch author (only needed if the person
     sending the patch is not the author).
 
   - An empty line.
@@ -619,46 +633,46 @@
   - The body of the explanation, line wrapped at 75 columns, which will
     be copied to the permanent changelog to describe this patch.
 
-  - The "Signed-off-by:" lines, described above, which will
+  - The ``Signed-off-by:`` lines, described above, which will
     also go in the changelog.
 
-  - A marker line containing simply "---".
+  - A marker line containing simply ``---``.
 
   - Any additional comments not suitable for the changelog.
 
-  - The actual patch (diff output).
+  - The actual patch (``diff`` output).
 
 The Subject line format makes it very easy to sort the emails
 alphabetically by subject line - pretty much any email reader will
 support that - since because the sequence number is zero-padded,
 the numerical and alphabetic sort is the same.
 
-The "subsystem" in the email's Subject should identify which
+The ``subsystem`` in the email's Subject should identify which
 area or subsystem of the kernel is being patched.
 
-The "summary phrase" in the email's Subject should concisely
-describe the patch which that email contains.  The "summary
-phrase" should not be a filename.  Do not use the same "summary
-phrase" for every patch in a whole patch series (where a "patch
-series" is an ordered sequence of multiple, related patches).
+The ``summary phrase`` in the email's Subject should concisely
+describe the patch which that email contains.  The ``summary
+phrase`` should not be a filename.  Do not use the same ``summary
+phrase`` for every patch in a whole patch series (where a ``patch
+series`` is an ordered sequence of multiple, related patches).
 
-Bear in mind that the "summary phrase" of your email becomes a
+Bear in mind that the ``summary phrase`` of your email becomes a
 globally-unique identifier for that patch.  It propagates all the way
-into the git changelog.  The "summary phrase" may later be used in
+into the ``git`` changelog.  The ``summary phrase`` may later be used in
 developer discussions which refer to the patch.  People will want to
-google for the "summary phrase" to read discussion regarding that
+google for the ``summary phrase`` to read discussion regarding that
 patch.  It will also be the only thing that people may quickly see
 when, two or three months later, they are going through perhaps
-thousands of patches using tools such as "gitk" or "git log
---oneline".
+thousands of patches using tools such as ``gitk`` or ``git log
+--oneline``.
 
-For these reasons, the "summary" must be no more than 70-75
+For these reasons, the ``summary`` must be no more than 70-75
 characters, and it must describe both what the patch changes, as well
 as why the patch might be necessary.  It is challenging to be both
 succinct and descriptive, but that is what a well-written summary
 should do.
 
-The "summary phrase" may be prefixed by tags enclosed in square
+The ``summary phrase`` may be prefixed by tags enclosed in square
 brackets: "Subject: [PATCH <tag>...] <summary phrase>".  The tags are
 not considered part of the summary phrase, but describe how the patch
 should be treated.  Common tags might include a version descriptor if
@@ -670,19 +684,19 @@
 applied and that they have reviewed or applied all of the patches in
 the patch series.
 
-A couple of example Subjects:
+A couple of example Subjects::
 
     Subject: [PATCH 2/5] ext2: improve scalability of bitmap searching
     Subject: [PATCH v2 01/27] x86: fix eflags tracking
 
-The "from" line must be the very first line in the message body,
+The ``from`` line must be the very first line in the message body,
 and has the form:
 
         From: Original Author <author@example.com>
 
-The "from" line specifies who will be credited as the author of the
-patch in the permanent changelog.  If the "from" line is missing,
-then the "From:" line from the email header will be used to determine
+The ``from`` line specifies who will be credited as the author of the
+patch in the permanent changelog.  If the ``from`` line is missing,
+then the ``From:`` line from the email header will be used to determine
 the patch author in the changelog.
 
 The explanation body will be committed to the permanent source
@@ -694,35 +708,37 @@
 looking for the applicable patch.  If a patch fixes a compile failure,
 it may not be necessary to include _all_ of the compile failures; just
 enough that it is likely that someone searching for the patch can find
-it.  As in the "summary phrase", it is important to be both succinct as
+it.  As in the ``summary phrase``, it is important to be both succinct as
 well as descriptive.
 
-The "---" marker line serves the essential purpose of marking for patch
+The ``---`` marker line serves the essential purpose of marking for patch
 handling tools where the changelog message ends.
 
-One good use for the additional comments after the "---" marker is for
-a diffstat, to show what files have changed, and the number of
-inserted and deleted lines per file.  A diffstat is especially useful
+One good use for the additional comments after the ``---`` marker is for
+a ``diffstat``, to show what files have changed, and the number of
+inserted and deleted lines per file.  A ``diffstat`` is especially useful
 on bigger patches.  Other comments relevant only to the moment or the
 maintainer, not suitable for the permanent changelog, should also go
-here.  A good example of such comments might be "patch changelogs"
+here.  A good example of such comments might be ``patch changelogs``
 which describe what has changed between the v1 and v2 version of the
 patch.
 
-If you are going to include a diffstat after the "---" marker, please
-use diffstat options "-p 1 -w 70" so that filenames are listed from
+If you are going to include a ``diffstat`` after the ``---`` marker, please
+use ``diffstat`` options ``-p 1 -w 70`` so that filenames are listed from
 the top of the kernel source tree and don't use too much horizontal
-space (easily fit in 80 columns, maybe with some indentation).  (git
+space (easily fit in 80 columns, maybe with some indentation).  (``git``
 generates appropriate diffstats by default.)
 
 See more details on the proper patch format in the following
 references.
 
+.. _explicit_in_reply_to:
+
 15) Explicit In-Reply-To headers
 --------------------------------
 
 It can be helpful to manually add In-Reply-To: headers to a patch
-(e.g., when using "git send-email") to associate the patch with
+(e.g., when using ``git send-email``) to associate the patch with
 previous relevant discussion, e.g. to link a bug fix to the email with
 the bug report.  However, for a multi-patch series, it is generally
 best to avoid using In-Reply-To: to link to older versions of the
@@ -732,12 +748,12 @@
 the cover email text) to link to an earlier version of the patch series.
 
 
-16) Sending "git pull" requests
--------------------------------
+16) Sending ``git pull`` requests
+---------------------------------
 
 If you have a series of patches, it may be most convenient to have the
 maintainer pull them directly into the subsystem repository with a
-"git pull" operation.  Note, however, that pulling patches from a developer
+``git pull`` operation.  Note, however, that pulling patches from a developer
 requires a higher degree of trust than taking patches from a mailing list.
 As a result, many subsystem maintainers are reluctant to take pull
 requests, especially from new, unknown developers.  If in doubt you can use
@@ -746,7 +762,7 @@
 
 A pull request should have [GIT] or [PULL] in the subject line.  The
 request itself should include the repository name and the branch of
-interest on a single line; it should look something like:
+interest on a single line; it should look something like::
 
   Please pull from
 
@@ -755,10 +771,10 @@
   to get these changes:
 
 A pull request should also include an overall message saying what will be
-included in the request, a "git shortlog" listing of the patches
-themselves, and a diffstat showing the overall effect of the patch series.
+included in the request, a ``git shortlog`` listing of the patches
+themselves, and a ``diffstat`` showing the overall effect of the patch series.
 The easiest way to get all this information together is, of course, to let
-git do it for you with the "git request-pull" command.
+``git`` do it for you with the ``git request-pull`` command.
 
 Some maintainers (including Linus) want to see pull requests from signed
 commits; that increases their confidence that the request actually came
@@ -770,8 +786,8 @@
 new developers, but there is no way around it.  Attending conferences can
 be a good way to find developers who can sign your key.
 
-Once you have prepared a patch series in git that you wish to have somebody
-pull, create a signed tag with "git tag -s".  This will create a new tag
+Once you have prepared a patch series in ``git`` that you wish to have somebody
+pull, create a signed tag with ``git tag -s``.  This will create a new tag
 identifying the last commit in the series and containing a signature
 created with your private key.  You will also have the opportunity to add a
 changelog-style message to the tag; this is an ideal place to describe the
@@ -782,14 +798,13 @@
 public tree.
 
 When generating your pull request, use the signed tag as the target.  A
-command like this will do the trick:
+command like this will do the trick::
 
   git request-pull master git://my.public.tree/linux.git my-signed-tag
 
 
-----------------------
-SECTION 2 - REFERENCES
-----------------------
+REFERENCES
+**********
 
 Andrew Morton, "The perfect patch" (tpp).
   <http://www.ozlabs.org/~akpm/stuff/tpp.txt>
@@ -799,23 +814,28 @@
 
 Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer".
   <http://www.kroah.com/log/linux/maintainer.html>
+
   <http://www.kroah.com/log/linux/maintainer-02.html>
+
   <http://www.kroah.com/log/linux/maintainer-03.html>
+
   <http://www.kroah.com/log/linux/maintainer-04.html>
+
   <http://www.kroah.com/log/linux/maintainer-05.html>
+
   <http://www.kroah.com/log/linux/maintainer-06.html>
 
 NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!
   <https://lkml.org/lkml/2005/7/11/336>
 
 Kernel Documentation/CodingStyle:
-  <Documentation/CodingStyle>
+  :ref:`Documentation/CodingStyle <codingstyle>`
 
 Linus Torvalds's mail on the canonical patch format:
   <http://lkml.org/lkml/2005/4/7/183>
 
 Andi Kleen, "On submitting kernel patches"
   Some strategies to get difficult or controversial changes in.
+
   http://halobates.de/on-submitting-patches.pdf
 
---
diff --git a/Documentation/applying-patches.txt b/Documentation/applying-patches.txt
index 77df55b..02ce492 100644
--- a/Documentation/applying-patches.txt
+++ b/Documentation/applying-patches.txt
@@ -1,9 +1,13 @@
+.. _applying_patches:
 
-	Applying Patches To The Linux Kernel
-	------------------------------------
+Applying Patches To The Linux Kernel
+++++++++++++++++++++++++++++++++++++
 
-	Original by: Jesper Juhl, August 2005
-	Last update: 2006-01-05
+Original by:
+	Jesper Juhl, August 2005
+
+Last update:
+	2016-09-14
 
 
 A frequently asked question on the Linux Kernel Mailing List is how to apply
@@ -17,10 +21,12 @@
 
 
 What is a patch?
----
- A patch is a small text document containing a delta of changes between two
-different versions of a source tree. Patches are created with the `diff'
+================
+
+A patch is a small text document containing a delta of changes between two
+different versions of a source tree. Patches are created with the ``diff``
 program.
+
 To correctly apply a patch you need to know what base it was generated from
 and what new version the patch will change the source tree into. These
 should both be present in the patch file metadata or be possible to deduce
@@ -28,8 +34,9 @@
 
 
 How do I apply or revert a patch?
----
- You apply a patch with the `patch' program. The patch program reads a diff
+=================================
+
+You apply a patch with the ``patch`` program. The patch program reads a diff
 (or patch) file and makes the changes to the source tree described in it.
 
 Patches for the Linux kernel are generated relative to the parent directory
@@ -38,26 +45,33 @@
 This means that paths to files inside the patch file contain the name of the
 kernel source directories it was generated against (or some other directory
 names like "a/" and "b/").
+
 Since this is unlikely to match the name of the kernel source dir on your
 local machine (but is often useful info to see what version an otherwise
 unlabeled patch was generated against) you should change into your kernel
 source directory and then strip the first element of the path from filenames
-in the patch file when applying it (the -p1 argument to `patch' does this).
+in the patch file when applying it (the ``-p1`` argument to ``patch`` does
+this).
 
 To revert a previously applied patch, use the -R argument to patch.
-So, if you applied a patch like this:
+So, if you applied a patch like this::
+
 	patch -p1 < ../patch-x.y.z
 
-You can revert (undo) it like this:
+You can revert (undo) it like this::
+
 	patch -R -p1 < ../patch-x.y.z
 
 
-How do I feed a patch/diff file to `patch'?
----
- This (as usual with Linux and other UNIX like operating systems) can be
+How do I feed a patch/diff file to ``patch``?
+=============================================
+
+This (as usual with Linux and other UNIX like operating systems) can be
 done in several different ways.
+
 In all the examples below I feed the file (in uncompressed form) to patch
-via stdin using the following syntax:
+via stdin using the following syntax::
+
 	patch -p1 < path/to/patch-x.y.z
 
 If you just want to be able to follow the examples below and don't want to
@@ -65,35 +79,40 @@
 section here.
 
 Patch can also get the name of the file to use via the -i argument, like
-this:
+this::
+
 	patch -p1 -i path/to/patch-x.y.z
 
-If your patch file is compressed with gzip or bzip2 and you don't want to
+If your patch file is compressed with gzip or xz and you don't want to
 uncompress it before applying it, then you can feed it to patch like this
-instead:
-	zcat path/to/patch-x.y.z.gz | patch -p1
-	bzcat path/to/patch-x.y.z.bz2 | patch -p1
+instead::
+
+	xzcat path/to/patch-x.y.z.xz | patch -p1
+	bzcat path/to/patch-x.y.z.gz | patch -p1
 
 If you wish to uncompress the patch file by hand first before applying it
 (what I assume you've done in the examples below), then you simply run
-gunzip or bunzip2 on the file -- like this:
+gunzip or xz on the file -- like this::
+
 	gunzip patch-x.y.z.gz
-	bunzip2 patch-x.y.z.bz2
+	xz -d patch-x.y.z.xz
 
 Which will leave you with a plain text patch-x.y.z file that you can feed to
-patch via stdin or the -i argument, as you prefer.
+patch via stdin or the ``-i`` argument, as you prefer.
 
-A few other nice arguments for patch are -s which causes patch to be silent
+A few other nice arguments for patch are ``-s`` which causes patch to be silent
 except for errors which is nice to prevent errors from scrolling out of the
-screen too fast, and --dry-run which causes patch to just print a listing of
-what would happen, but doesn't actually make any changes. Finally --verbose
+screen too fast, and ``--dry-run`` which causes patch to just print a listing of
+what would happen, but doesn't actually make any changes. Finally ``--verbose``
 tells patch to print more information about the work being done.
 
 
 Common errors when patching
----
- When patch applies a patch file it attempts to verify the sanity of the
+===========================
+
+When patch applies a patch file it attempts to verify the sanity of the
 file in different ways.
+
 Checking that the file looks like a valid patch file and checking the code
 around the bits being modified matches the context provided in the patch are
 just two of the basic sanity checks patch does.
@@ -111,13 +130,13 @@
 usually adjust the line numbers and apply the patch.
 
 Whenever patch applies a patch that it had to modify a bit to make it fit
-it'll tell you about it by saying the patch applied with 'fuzz'.
+it'll tell you about it by saying the patch applied with **fuzz**.
 You should be wary of such changes since even though patch probably got it
 right it doesn't /always/ get it right, and the result will sometimes be
 wrong.
 
 When patch encounters a change that it can't fix up with fuzz it rejects it
-outright and leaves a file with a .rej extension (a reject file). You can
+outright and leaves a file with a ``.rej`` extension (a reject file). You can
 read this file to see exactly what change couldn't be applied, so you can
 go fix it up by hand if you wish.
 
@@ -132,43 +151,47 @@
 
 Let's look a bit more at some of the messages patch can produce.
 
-If patch stops and presents a "File to patch:" prompt, then patch could not
+If patch stops and presents a ``File to patch:`` prompt, then patch could not
 find a file to be patched. Most likely you forgot to specify -p1 or you are
 in the wrong directory. Less often, you'll find patches that need to be
-applied with -p0 instead of -p1 (reading the patch file should reveal if
+applied with ``-p0`` instead of ``-p1`` (reading the patch file should reveal if
 this is the case -- if so, then this is an error by the person who created
 the patch but is not fatal).
 
-If you get "Hunk #2 succeeded at 1887 with fuzz 2 (offset 7 lines)." or a
+If you get ``Hunk #2 succeeded at 1887 with fuzz 2 (offset 7 lines).`` or a
 message similar to that, then it means that patch had to adjust the location
 of the change (in this example it needed to move 7 lines from where it
 expected to make the change to make it fit).
+
 The resulting file may or may not be OK, depending on the reason the file
 was different than expected.
+
 This often happens if you try to apply a patch that was generated against a
 different kernel version than the one you are trying to patch.
 
-If you get a message like "Hunk #3 FAILED at 2387.", then it means that the
+If you get a message like ``Hunk #3 FAILED at 2387.``, then it means that the
 patch could not be applied correctly and the patch program was unable to
-fuzz its way through. This will generate a .rej file with the change that
-caused the patch to fail and also a .orig file showing you the original
+fuzz its way through. This will generate a ``.rej`` file with the change that
+caused the patch to fail and also a ``.orig`` file showing you the original
 content that couldn't be changed.
 
-If you get "Reversed (or previously applied) patch detected!  Assume -R? [n]"
+If you get ``Reversed (or previously applied) patch detected!  Assume -R? [n]``
 then patch detected that the change contained in the patch seems to have
 already been made.
+
 If you actually did apply this patch previously and you just re-applied it
 in error, then just say [n]o and abort this patch. If you applied this patch
 previously and actually intended to revert it, but forgot to specify -R,
-then you can say [y]es here to make patch revert it for you.
+then you can say [**y**]es here to make patch revert it for you.
+
 This can also happen if the creator of the patch reversed the source and
 destination directories when creating the patch, and in that case reverting
 the patch will in fact apply it.
 
-A message similar to "patch: **** unexpected end of file in patch" or "patch
-unexpectedly ends in middle of line" means that patch could make no sense of
-the file you fed to it. Either your download is broken, you tried to feed
-patch a compressed patch file without uncompressing it first, or the patch
+A message similar to ``patch: **** unexpected end of file in patch`` or
+``patch unexpectedly ends in middle of line`` means that patch could make no
+sense of the file you fed to it. Either your download is broken, you tried to
+feed patch a compressed patch file without uncompressing it first, or the patch
 file that you are using has been mangled by a mail client or mail transfer
 agent along the way somewhere, e.g., by splitting a long line into two lines.
 Often these warnings can easily be fixed by joining (concatenating) the
@@ -182,28 +205,32 @@
 wish to apply.
 
 
-Are there any alternatives to `patch'?
----
- Yes there are alternatives.
+Are there any alternatives to ``patch``?
+========================================
 
- You can use the `interdiff' program (http://cyberelk.net/tim/patchutils/) to
+
+Yes there are alternatives.
+
+You can use the ``interdiff`` program (http://cyberelk.net/tim/patchutils/) to
 generate a patch representing the differences between two patches and then
 apply the result.
-This will let you move from something like 2.6.12.2 to 2.6.12.3 in a single
+
+This will let you move from something like 4.7.2 to 4.7.3 in a single
 step. The -z flag to interdiff will even let you feed it patches in gzip or
 bzip2 compressed form directly without the use of zcat or bzcat or manual
 decompression.
 
-Here's how you'd go from 2.6.12.2 to 2.6.12.3 in a single step:
-	interdiff -z ../patch-2.6.12.2.bz2 ../patch-2.6.12.3.gz | patch -p1
+Here's how you'd go from 4.7.2 to 4.7.3 in a single step::
+
+	interdiff -z ../patch-4.7.2.gz ../patch-4.7.3.gz | patch -p1
 
 Although interdiff may save you a step or two you are generally advised to
 do the additional steps since interdiff can get things wrong in some cases.
 
- Another alternative is `ketchup', which is a python script for automatic
+Another alternative is ``ketchup``, which is a python script for automatic
 downloading and applying of patches (http://www.selenic.com/ketchup/).
 
- Other nice tools are diffstat, which shows a summary of changes made by a
+Other nice tools are diffstat, which shows a summary of changes made by a
 patch; lsdiff, which displays a short listing of affected files in a patch
 file, along with (optionally) the line numbers of the start of each patch;
 and grepdiff, which displays a list of the files modified by a patch where
@@ -211,99 +238,103 @@
 
 
 Where can I download the patches?
----
- The patches are available at http://kernel.org/
+=================================
+
+The patches are available at http://kernel.org/
 Most recent patches are linked from the front page, but they also have
 specific homes.
 
-The 2.6.x.y (-stable) and 2.6.x patches live at
- ftp://ftp.kernel.org/pub/linux/kernel/v2.6/
+The 4.x.y (-stable) and 4.x patches live at
+
+	ftp://ftp.kernel.org/pub/linux/kernel/v4.x/
 
 The -rc patches live at
- ftp://ftp.kernel.org/pub/linux/kernel/v2.6/testing/
 
-The -git patches live at
- ftp://ftp.kernel.org/pub/linux/kernel/v2.6/snapshots/
+	ftp://ftp.kernel.org/pub/linux/kernel/v4.x/testing/
 
-The -mm kernels live at
- ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/
-
-In place of ftp.kernel.org you can use ftp.cc.kernel.org, where cc is a
+In place of ``ftp.kernel.org`` you can use ``ftp.cc.kernel.org``, where cc is a
 country code. This way you'll be downloading from a mirror site that's most
 likely geographically closer to you, resulting in faster downloads for you,
 less bandwidth used globally and less load on the main kernel.org servers --
 these are good things, so do use mirrors when possible.
 
 
-The 2.6.x kernels
----
- These are the base stable releases released by Linus. The highest numbered
+The 4.x kernels
+===============
+
+These are the base stable releases released by Linus. The highest numbered
 release is the most recent.
 
 If regressions or other serious flaws are found, then a -stable fix patch
-will be released (see below) on top of this base. Once a new 2.6.x base
+will be released (see below) on top of this base. Once a new 4.x base
 kernel is released, a patch is made available that is a delta between the
-previous 2.6.x kernel and the new one.
+previous 4.x kernel and the new one.
 
-To apply a patch moving from 2.6.11 to 2.6.12, you'd do the following (note
-that such patches do *NOT* apply on top of 2.6.x.y kernels but on top of the
-base 2.6.x kernel -- if you need to move from 2.6.x.y to 2.6.x+1 you need to
-first revert the 2.6.x.y patch).
+To apply a patch moving from 4.6 to 4.7, you'd do the following (note
+that such patches do **NOT** apply on top of 4.x.y kernels but on top of the
+base 4.x kernel -- if you need to move from 4.x.y to 4.x+1 you need to
+first revert the 4.x.y patch).
 
-Here are some examples:
+Here are some examples::
 
-# moving from 2.6.11 to 2.6.12
-$ cd ~/linux-2.6.11			# change to kernel source dir
-$ patch -p1 < ../patch-2.6.12		# apply the 2.6.12 patch
-$ cd ..
-$ mv linux-2.6.11 linux-2.6.12		# rename source dir
+	# moving from 4.6 to 4.7
 
-# moving from 2.6.11.1 to 2.6.12
-$ cd ~/linux-2.6.11.1			# change to kernel source dir
-$ patch -p1 -R < ../patch-2.6.11.1	# revert the 2.6.11.1 patch
-					# source dir is now 2.6.11
-$ patch -p1 < ../patch-2.6.12		# apply new 2.6.12 patch
-$ cd ..
-$ mv linux-2.6.11.1 linux-2.6.12		# rename source dir
+	$ cd ~/linux-4.6		# change to kernel source dir
+	$ patch -p1 < ../patch-4.7	# apply the 4.7 patch
+	$ cd ..
+	$ mv linux-4.6 linux-4.7	# rename source dir
+
+	# moving from 4.6.1 to 4.7
+
+	$ cd ~/linux-4.6.1		# change to kernel source dir
+	$ patch -p1 -R < ../patch-4.6.1	# revert the 4.6.1 patch
+					# source dir is now 4.6
+	$ patch -p1 < ../patch-4.7	# apply new 4.7 patch
+	$ cd ..
+	$ mv linux-4.6.1 linux-4.7	# rename source dir
 
 
-The 2.6.x.y kernels
----
- Kernels with 4-digit versions are -stable kernels. They contain small(ish)
+The 4.x.y kernels
+=================
+
+Kernels with 3-digit versions are -stable kernels. They contain small(ish)
 critical fixes for security problems or significant regressions discovered
-in a given 2.6.x kernel.
+in a given 4.x kernel.
 
 This is the recommended branch for users who want the most recent stable
 kernel and are not interested in helping test development/experimental
 versions.
 
-If no 2.6.x.y kernel is available, then the highest numbered 2.6.x kernel is
+If no 4.x.y kernel is available, then the highest numbered 4.x kernel is
 the current stable kernel.
 
- note: the -stable team usually do make incremental patches available as well
+.. note::
+
+ The -stable team usually do make incremental patches available as well
  as patches against the latest mainline release, but I only cover the
  non-incremental ones below. The incremental ones can be found at
- ftp://ftp.kernel.org/pub/linux/kernel/v2.6/incr/
+ ftp://ftp.kernel.org/pub/linux/kernel/v4.x/incr/
 
-These patches are not incremental, meaning that for example the 2.6.12.3
-patch does not apply on top of the 2.6.12.2 kernel source, but rather on top
-of the base 2.6.12 kernel source .
-So, in order to apply the 2.6.12.3 patch to your existing 2.6.12.2 kernel
-source you have to first back out the 2.6.12.2 patch (so you are left with a
-base 2.6.12 kernel source) and then apply the new 2.6.12.3 patch.
+These patches are not incremental, meaning that for example the 4.7.3
+patch does not apply on top of the 4.7.2 kernel source, but rather on top
+of the base 4.7 kernel source.
 
-Here's a small example:
+So, in order to apply the 4.7.3 patch to your existing 4.7.2 kernel
+source you have to first back out the 4.7.2 patch (so you are left with a
+base 4.7 kernel source) and then apply the new 4.7.3 patch.
 
-$ cd ~/linux-2.6.12.2			# change into the kernel source dir
-$ patch -p1 -R < ../patch-2.6.12.2	# revert the 2.6.12.2 patch
-$ patch -p1 < ../patch-2.6.12.3		# apply the new 2.6.12.3 patch
-$ cd ..
-$ mv linux-2.6.12.2 linux-2.6.12.3	# rename the kernel source dir
+Here's a small example::
 
+	$ cd ~/linux-4.7.2		# change to the kernel source dir
+	$ patch -p1 -R < ../patch-4.7.2	# revert the 4.7.2 patch
+	$ patch -p1 < ../patch-4.7.3	# apply the new 4.7.3 patch
+	$ cd ..
+	$ mv linux-4.7.2 linux-4.7.3	# rename the kernel source dir
 
 The -rc kernels
----
- These are release-candidate kernels. These are development kernels released
+===============
+
+These are release-candidate kernels. These are development kernels released
 by Linus whenever he deems the current git (the kernel's source management
 tool) tree to be in a reasonably sane state adequate for testing.
 
@@ -317,39 +348,44 @@
 development kernels but do not want to run some of the really experimental
 stuff (such people should see the sections about -git and -mm kernels below).
 
-The -rc patches are not incremental, they apply to a base 2.6.x kernel, just
-like the 2.6.x.y patches described above. The kernel version before the -rcN
+The -rc patches are not incremental, they apply to a base 4.x kernel, just
+like the 4.x.y patches described above. The kernel version before the -rcN
 suffix denotes the version of the kernel that this -rc kernel will eventually
 turn into.
-So, 2.6.13-rc5 means that this is the fifth release candidate for the 2.6.13
-kernel and the patch should be applied on top of the 2.6.12 kernel source.
 
-Here are 3 examples of how to apply these patches:
+So, 4.8-rc5 means that this is the fifth release candidate for the 4.8
+kernel and the patch should be applied on top of the 4.7 kernel source.
 
-# first an example of moving from 2.6.12 to 2.6.13-rc3
-$ cd ~/linux-2.6.12			# change into the 2.6.12 source dir
-$ patch -p1 < ../patch-2.6.13-rc3	# apply the 2.6.13-rc3 patch
-$ cd ..
-$ mv linux-2.6.12 linux-2.6.13-rc3	# rename the source dir
+Here are 3 examples of how to apply these patches::
 
-# now let's move from 2.6.13-rc3 to 2.6.13-rc5
-$ cd ~/linux-2.6.13-rc3			# change into the 2.6.13-rc3 dir
-$ patch -p1 -R < ../patch-2.6.13-rc3	# revert the 2.6.13-rc3 patch
-$ patch -p1 < ../patch-2.6.13-rc5	# apply the new 2.6.13-rc5 patch
-$ cd ..
-$ mv linux-2.6.13-rc3 linux-2.6.13-rc5	# rename the source dir
+	# first an example of moving from 4.7 to 4.8-rc3
 
-# finally let's try and move from 2.6.12.3 to 2.6.13-rc5
-$ cd ~/linux-2.6.12.3			# change to the kernel source dir
-$ patch -p1 -R < ../patch-2.6.12.3	# revert the 2.6.12.3 patch
-$ patch -p1 < ../patch-2.6.13-rc5	# apply new 2.6.13-rc5 patch
-$ cd ..
-$ mv linux-2.6.12.3 linux-2.6.13-rc5	# rename the kernel source dir
+	$ cd ~/linux-4.7			# change to the 4.7 source dir
+	$ patch -p1 < ../patch-4.8-rc3		# apply the 4.8-rc3 patch
+	$ cd ..
+	$ mv linux-4.7 linux-4.8-rc3		# rename the source dir
+
+	# now let's move from 4.8-rc3 to 4.8-rc5
+
+	$ cd ~/linux-4.8-rc3			# change to the 4.8-rc3 dir
+	$ patch -p1 -R < ../patch-4.8-rc3	# revert the 4.8-rc3 patch
+	$ patch -p1 < ../patch-4.8-rc5		# apply the new 4.8-rc5 patch
+	$ cd ..
+	$ mv linux-4.8-rc3 linux-4.8-rc5	# rename the source dir
+
+	# finally let's try and move from 4.7.3 to 4.8-rc5
+
+	$ cd ~/linux-4.7.3			# change to the kernel source dir
+	$ patch -p1 -R < ../patch-4.7.3		# revert the 4.7.3 patch
+	$ patch -p1 < ../patch-4.8-rc5		# apply new 4.8-rc5 patch
+	$ cd ..
+	$ mv linux-4.7.3 linux-4.8-rc5		# rename the kernel source dir
 
 
 The -git kernels
----
- These are daily snapshots of Linus' kernel tree (managed in a git
+================
+
+These are daily snapshots of Linus' kernel tree (managed in a git
 repository, hence the name).
 
 These patches are usually released daily and represent the current state of
@@ -357,91 +393,66 @@
 generated automatically without even a cursory glance to see if they are
 sane.
 
--git patches are not incremental and apply either to a base 2.6.x kernel or
-a base 2.6.x-rc kernel -- you can see which from their name.
-A patch named 2.6.12-git1 applies to the 2.6.12 kernel source and a patch
-named 2.6.13-rc3-git2 applies to the source of the 2.6.13-rc3 kernel.
+-git patches are not incremental and apply either to a base 4.x kernel or
+a base 4.x-rc kernel -- you can see which from their name.
+A patch named 4.7-git1 applies to the 4.7 kernel source and a patch
+named 4.8-rc3-git2 applies to the source of the 4.8-rc3 kernel.
 
-Here are some examples of how to apply these patches:
+Here are some examples of how to apply these patches::
 
-# moving from 2.6.12 to 2.6.12-git1
-$ cd ~/linux-2.6.12			# change to the kernel source dir
-$ patch -p1 < ../patch-2.6.12-git1	# apply the 2.6.12-git1 patch
-$ cd ..
-$ mv linux-2.6.12 linux-2.6.12-git1	# rename the kernel source dir
+	# moving from 4.7 to 4.7-git1
 
-# moving from 2.6.12-git1 to 2.6.13-rc2-git3
-$ cd ~/linux-2.6.12-git1		# change to the kernel source dir
-$ patch -p1 -R < ../patch-2.6.12-git1	# revert the 2.6.12-git1 patch
-					# we now have a 2.6.12 kernel
-$ patch -p1 < ../patch-2.6.13-rc2	# apply the 2.6.13-rc2 patch
-					# the kernel is now 2.6.13-rc2
-$ patch -p1 < ../patch-2.6.13-rc2-git3	# apply the 2.6.13-rc2-git3 patch
-					# the kernel is now 2.6.13-rc2-git3
-$ cd ..
-$ mv linux-2.6.12-git1 linux-2.6.13-rc2-git3	# rename source dir
+	$ cd ~/linux-4.7			# change to the kernel source dir
+	$ patch -p1 < ../patch-4.7-git1		# apply the 4.7-git1 patch
+	$ cd ..
+	$ mv linux-4.7 linux-4.7-git1		# rename the kernel source dir
+
+	# moving from 4.7-git1 to 4.8-rc2-git3
+
+	$ cd ~/linux-4.7-git1			# change to the kernel source dir
+	$ patch -p1 -R < ../patch-4.7-git1	# revert the 4.7-git1 patch
+						# we now have a 4.7 kernel
+	$ patch -p1 < ../patch-4.8-rc2		# apply the 4.8-rc2 patch
+						# the kernel is now 4.8-rc2
+	$ patch -p1 < ../patch-4.8-rc2-git3	# apply the 4.8-rc2-git3 patch
+						# the kernel is now 4.8-rc2-git3
+	$ cd ..
+	$ mv linux-4.7-git1 linux-4.8-rc2-git3	# rename source dir
 
 
-The -mm kernels
----
- These are experimental kernels released by Andrew Morton.
+The -mm patches and the linux-next tree
+=======================================
 
-The -mm tree serves as a sort of proving ground for new features and other
-experimental patches.
-Once a patch has proved its worth in -mm for a while Andrew pushes it on to
-Linus for inclusion in mainline.
+The -mm patches are experimental patches released by Andrew Morton.
 
-Although it's encouraged that patches flow to Linus via the -mm tree, this
-is not always enforced.
-Subsystem maintainers (or individuals) sometimes push their patches directly
-to Linus, even though (or after) they have been merged and tested in -mm (or
-sometimes even without prior testing in -mm).
+In the past, -mm tree were used to also test subsystem patches, but this
+function is now done via the
+:ref:`linux-next <https://www.kernel.org/doc/man-pages/linux-next.html>`
+tree. The Subsystem maintainers push their patches first to linux-next,
+and, during the merge window, sends them directly to Linus.
 
-You should generally strive to get your patches into mainline via -mm to
-ensure maximum testing.
+The -mm patches serve as a sort of proving ground for new features and other
+experimental patches that aren't merged via a subsystem tree.
+Once such patches has proved its worth in -mm for a while Andrew pushes
+it on to Linus for inclusion in mainline.
 
-This branch is in constant flux and contains many experimental features, a
+The linux-next tree is daily updated, and includes the -mm patches.
+Both are in constant flux and contains many experimental features, a
 lot of debugging patches not appropriate for mainline etc., and is the most
 experimental of the branches described in this document.
 
-These kernels are not appropriate for use on systems that are supposed to be
+These patches are not appropriate for use on systems that are supposed to be
 stable and they are more risky to run than any of the other branches (make
 sure you have up-to-date backups -- that goes for any experimental kernel but
-even more so for -mm kernels).
+even more so for -mm patches or using a Kernel from the linux-next tree).
 
-These kernels in addition to all the other experimental patches they contain
-usually also contain any changes in the mainline -git kernels available at
-the time of release.
+Testing of -mm patches and linux-next is greatly appreciated since the whole
+point of those are to weed out regressions, crashes, data corruption bugs,
+build breakage (and any other bug in general) before changes are merged into
+the more stable mainline Linus tree.
 
-Testing of -mm kernels is greatly appreciated since the whole point of the
-tree is to weed out regressions, crashes, data corruption bugs, build
-breakage (and any other bug in general) before changes are merged into the
-more stable mainline Linus tree.
-But testers of -mm should be aware that breakage in this tree is more common
-than in any other tree.
-
-The -mm kernels are not released on a fixed schedule, but usually a few -mm
-kernels are released in between each -rc kernel (1 to 3 is common).
-The -mm kernels apply to either a base 2.6.x kernel (when no -rc kernels
-have been released yet) or to a Linus -rc kernel.
-
-Here are some examples of applying the -mm patches:
-
-# moving from 2.6.12 to 2.6.12-mm1
-$ cd ~/linux-2.6.12			# change to the 2.6.12 source dir
-$ patch -p1 < ../2.6.12-mm1		# apply the 2.6.12-mm1 patch
-$ cd ..
-$ mv linux-2.6.12 linux-2.6.12-mm1	# rename the source appropriately
-
-# moving from 2.6.12-mm1 to 2.6.13-rc3-mm3
-$ cd ~/linux-2.6.12-mm1
-$ patch -p1 -R < ../2.6.12-mm1		# revert the 2.6.12-mm1 patch
-					# we now have a 2.6.12 source
-$ patch -p1 < ../patch-2.6.13-rc3	# apply the 2.6.13-rc3 patch
-					# we now have a 2.6.13-rc3 source
-$ patch -p1 < ../2.6.13-rc3-mm3		# apply the 2.6.13-rc3-mm3 patch
-$ cd ..
-$ mv linux-2.6.12-mm1 linux-2.6.13-rc3-mm3	# rename the source dir
+But testers of -mm and linux-next should be aware that breakages are
+more common than in any other tree.
 
 
 This concludes this list of explanations of the various kernel trees.
diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
index e5a115f..c7a0554 100644
--- a/Documentation/arm/sunxi/README
+++ b/Documentation/arm/sunxi/README
@@ -73,4 +73,13 @@
     * Octa ARM Cortex-A7 based SoCs
       - Allwinner A83T
         + Datasheet
-          http://dl.linux-sunxi.org/A83T/A83T_datasheet_Revision_1.1.pdf
+          https://github.com/allwinner-zh/documents/raw/master/A83T/A83T_Datasheet_v1.3_20150510.pdf
+        + User Manual
+          https://github.com/allwinner-zh/documents/raw/master/A83T/A83T_User_Manual_v1.5.1_20150513.pdf
+
+    * Quad ARM Cortex-A53 based SoCs
+      - Allwinner A64
+        + Datasheet
+          http://dl.linux-sunxi.org/A64/A64_Datasheet_V1.1.pdf
+        + User Manual
+          http://dl.linux-sunxi.org/A64/Allwinner%20A64%20User%20Manual%20v1.0.pdf
diff --git a/Documentation/clk.txt b/Documentation/clk.txt
index 5c4bc4d..22f026a 100644
--- a/Documentation/clk.txt
+++ b/Documentation/clk.txt
@@ -31,24 +31,25 @@
 hardware-specific bits for the hypothetical "foo" hardware.
 
 Tying the two halves of this interface together is struct clk_hw, which
-is defined in struct clk_foo and pointed to within struct clk.  This
+is defined in struct clk_foo and pointed to within struct clk_core.  This
 allows for easy navigation between the two discrete halves of the common
 clock interface.
 
 	Part 2 - common data structures and api
 
-Below is the common struct clk definition from
-include/linux/clk-private.h, modified for brevity:
+Below is the common struct clk_core definition from
+drivers/clk/clk.c, modified for brevity:
 
-	struct clk {
+	struct clk_core {
 		const char		*name;
 		const struct clk_ops	*ops;
 		struct clk_hw		*hw;
-		char			**parent_names;
-		struct clk		**parents;
-		struct clk		*parent;
-		struct hlist_head	children;
-		struct hlist_node	child_node;
+		struct module		*owner;
+		struct clk_core		*parent;
+		const char		**parent_names;
+		struct clk_core		**parents;
+		u8			num_parents;
+		u8			new_parent_index;
 		...
 	};
 
@@ -56,16 +57,19 @@
 api itself defines several driver-facing functions which operate on
 struct clk.  That api is documented in include/linux/clk.h.
 
-Platforms and devices utilizing the common struct clk use the struct
-clk_ops pointer in struct clk to perform the hardware-specific parts of
-the operations defined in clk.h:
+Platforms and devices utilizing the common struct clk_core use the struct
+clk_ops pointer in struct clk_core to perform the hardware-specific parts of
+the operations defined in clk-provider.h:
 
 	struct clk_ops {
 		int		(*prepare)(struct clk_hw *hw);
 		void		(*unprepare)(struct clk_hw *hw);
+		int		(*is_prepared)(struct clk_hw *hw);
+		void		(*unprepare_unused)(struct clk_hw *hw);
 		int		(*enable)(struct clk_hw *hw);
 		void		(*disable)(struct clk_hw *hw);
 		int		(*is_enabled)(struct clk_hw *hw);
+		void		(*disable_unused)(struct clk_hw *hw);
 		unsigned long	(*recalc_rate)(struct clk_hw *hw,
 						unsigned long parent_rate);
 		long		(*round_rate)(struct clk_hw *hw,
@@ -84,6 +88,8 @@
 					    u8 index);
 		unsigned long	(*recalc_accuracy)(struct clk_hw *hw,
 						unsigned long parent_accuracy);
+		int		(*get_phase)(struct clk_hw *hw);
+		int		(*set_phase)(struct clk_hw *hw, int degrees);
 		void		(*init)(struct clk_hw *hw);
 		int		(*debug_init)(struct clk_hw *hw,
 					      struct dentry *dentry);
@@ -91,7 +97,7 @@
 
 	Part 3 - hardware clk implementations
 
-The strength of the common struct clk comes from its .ops and .hw pointers
+The strength of the common struct clk_core comes from its .ops and .hw pointers
 which abstract the details of struct clk from the hardware-specific bits, and
 vice versa.  To illustrate consider the simple gateable clk implementation in
 drivers/clk/clk-gate.c:
@@ -107,7 +113,7 @@
 knowledge about which register and bit controls this clk's gating.
 Nothing about clock topology or accounting, such as enable_count or
 notifier_count, is needed here.  That is all handled by the common
-framework code and struct clk.
+framework code and struct clk_core.
 
 Let's walk through enabling this clk from driver code:
 
@@ -139,22 +145,18 @@
 
 Note that to_clk_gate is defined as:
 
-#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, clk)
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
 
 This pattern of abstraction is used for every clock hardware
 representation.
 
 	Part 4 - supporting your own clk hardware
 
-When implementing support for a new type of clock it only necessary to
+When implementing support for a new type of clock it is only necessary to
 include the following header:
 
 #include <linux/clk-provider.h>
 
-include/linux/clk.h is included within that header and clk-private.h
-must never be included from the code which implements the operations for
-a clock.  More on that below in Part 5.
-
 To construct a clk hardware structure for your platform you must define
 the following:
 
diff --git a/Documentation/coccinelle.txt b/Documentation/coccinelle.txt
deleted file mode 100644
index 01fb1da..0000000
--- a/Documentation/coccinelle.txt
+++ /dev/null
@@ -1,470 +0,0 @@
-Copyright 2010 Nicolas Palix <npalix@diku.dk>
-Copyright 2010 Julia Lawall <julia@diku.dk>
-Copyright 2010 Gilles Muller <Gilles.Muller@lip6.fr>
-
-
- Getting Coccinelle
-~~~~~~~~~~~~~~~~~~~~
-
-The semantic patches included in the kernel use features and options
-which are provided by Coccinelle version 1.0.0-rc11 and above.
-Using earlier versions will fail as the option names used by
-the Coccinelle files and coccicheck have been updated.
-
-Coccinelle is available through the package manager
-of many distributions, e.g. :
-
- - Debian
- - Fedora
- - Ubuntu
- - OpenSUSE
- - Arch Linux
- - NetBSD
- - FreeBSD
-
-
-You can get the latest version released from the Coccinelle homepage at
-http://coccinelle.lip6.fr/
-
-Information and tips about Coccinelle are also provided on the wiki
-pages at http://cocci.ekstranet.diku.dk/wiki/doku.php
-
-Once you have it, run the following command:
-
-     	./configure
-        make
-
-as a regular user, and install it with
-
-        sudo make install
-
- Supplemental documentation
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-For supplemental documentation refer to the wiki:
-
-https://bottest.wiki.kernel.org/coccicheck
-
-The wiki documentation always refers to the linux-next version of the script.
-
- Using Coccinelle on the Linux kernel
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-A Coccinelle-specific target is defined in the top level
-Makefile. This target is named 'coccicheck' and calls the 'coccicheck'
-front-end in the 'scripts' directory.
-
-Four basic modes are defined: patch, report, context, and org. The mode to
-use is specified by setting the MODE variable with 'MODE=<mode>'.
-
-'patch' proposes a fix, when possible.
-
-'report' generates a list in the following format:
-  file:line:column-column: message
-
-'context' highlights lines of interest and their context in a
-diff-like style.Lines of interest are indicated with '-'.
-
-'org' generates a report in the Org mode format of Emacs.
-
-Note that not all semantic patches implement all modes. For easy use
-of Coccinelle, the default mode is "report".
-
-Two other modes provide some common combinations of these modes.
-
-'chain' tries the previous modes in the order above until one succeeds.
-
-'rep+ctxt' runs successively the report mode and the context mode.
-	   It should be used with the C option (described later)
-	   which checks the code on a file basis.
-
-Examples:
-	To make a report for every semantic patch, run the following command:
-
-		make coccicheck MODE=report
-
-	To produce patches, run:
-
-		make coccicheck MODE=patch
-
-
-The coccicheck target applies every semantic patch available in the
-sub-directories of 'scripts/coccinelle' to the entire Linux kernel.
-
-For each semantic patch, a commit message is proposed.  It gives a
-description of the problem being checked by the semantic patch, and
-includes a reference to Coccinelle.
-
-As any static code analyzer, Coccinelle produces false
-positives. Thus, reports must be carefully checked, and patches
-reviewed.
-
-To enable verbose messages set the V= variable, for example:
-
-   make coccicheck MODE=report V=1
-
- Coccinelle parallelization
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-By default, coccicheck tries to run as parallel as possible. To change
-the parallelism, set the J= variable. For example, to run across 4 CPUs:
-
-   make coccicheck MODE=report J=4
-
-As of Coccinelle 1.0.2 Coccinelle uses Ocaml parmap for parallelization,
-if support for this is detected you will benefit from parmap parallelization.
-
-When parmap is enabled coccicheck will enable dynamic load balancing by using
-'--chunksize 1' argument, this ensures we keep feeding threads with work
-one by one, so that we avoid the situation where most work gets done by only
-a few threads. With dynamic load balancing, if a thread finishes early we keep
-feeding it more work.
-
-When parmap is enabled, if an error occurs in Coccinelle, this error
-value is propagated back, the return value of the 'make coccicheck'
-captures this return value.
-
- Using Coccinelle with a single semantic patch
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The optional make variable COCCI can be used to check a single
-semantic patch. In that case, the variable must be initialized with
-the name of the semantic patch to apply.
-
-For instance:
-
-	make coccicheck COCCI=<my_SP.cocci> MODE=patch
-or
-	make coccicheck COCCI=<my_SP.cocci> MODE=report
-
-
- Controlling Which Files are Processed by Coccinelle
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-By default the entire kernel source tree is checked.
-
-To apply Coccinelle to a specific directory, M= can be used.
-For example, to check drivers/net/wireless/ one may write:
-
-    make coccicheck M=drivers/net/wireless/
-
-To apply Coccinelle on a file basis, instead of a directory basis, the
-following command may be used:
-
-    make C=1 CHECK="scripts/coccicheck"
-
-To check only newly edited code, use the value 2 for the C flag, i.e.
-
-    make C=2 CHECK="scripts/coccicheck"
-
-In these modes, which works on a file basis, there is no information
-about semantic patches displayed, and no commit message proposed.
-
-This runs every semantic patch in scripts/coccinelle by default. The
-COCCI variable may additionally be used to only apply a single
-semantic patch as shown in the previous section.
-
-The "report" mode is the default. You can select another one with the
-MODE variable explained above.
-
- Debugging Coccinelle SmPL patches
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Using coccicheck is best as it provides in the spatch command line
-include options matching the options used when we compile the kernel.
-You can learn what these options are by using V=1, you could then
-manually run Coccinelle with debug options added.
-
-Alternatively you can debug running Coccinelle against SmPL patches
-by asking for stderr to be redirected to stderr, by default stderr
-is redirected to /dev/null, if you'd like to capture stderr you
-can specify the DEBUG_FILE="file.txt" option to coccicheck. For
-instance:
-
-    rm -f cocci.err
-    make coccicheck COCCI=scripts/coccinelle/free/kfree.cocci MODE=report DEBUG_FILE=cocci.err
-    cat cocci.err
-
-You can use SPFLAGS to add debugging flags, for instance you may want to
-add both --profile --show-trying to SPFLAGS when debugging. For instance
-you may want to use:
-
-    rm -f err.log
-    export COCCI=scripts/coccinelle/misc/irqf_oneshot.cocci
-    make coccicheck DEBUG_FILE="err.log" MODE=report SPFLAGS="--profile --show-trying" M=./drivers/mfd/arizona-irq.c
-
-err.log will now have the profiling information, while stdout will
-provide some progress information as Coccinelle moves forward with
-work.
-
-DEBUG_FILE support is only supported when using coccinelle >= 1.2.
-
- .cocciconfig support
-~~~~~~~~~~~~~~~~~~~~~~
-
-Coccinelle supports reading .cocciconfig for default Coccinelle options that
-should be used every time spatch is spawned, the order of precedence for
-variables for .cocciconfig is as follows:
-
-  o Your current user's home directory is processed first
-  o Your directory from which spatch is called is processed next
-  o The directory provided with the --dir option is processed last, if used
-
-Since coccicheck runs through make, it naturally runs from the kernel
-proper dir, as such the second rule above would be implied for picking up a
-.cocciconfig when using 'make coccicheck'.
-
-'make coccicheck' also supports using M= targets.If you do not supply
-any M= target, it is assumed you want to target the entire kernel.
-The kernel coccicheck script has:
-
-    if [ "$KBUILD_EXTMOD" = "" ] ; then
-        OPTIONS="--dir $srctree $COCCIINCLUDE"
-    else
-        OPTIONS="--dir $KBUILD_EXTMOD $COCCIINCLUDE"
-    fi
-
-KBUILD_EXTMOD is set when an explicit target with M= is used. For both cases
-the spatch --dir argument is used, as such third rule applies when whether M=
-is used or not, and when M= is used the target directory can have its own
-.cocciconfig file. When M= is not passed as an argument to coccicheck the
-target directory is the same as the directory from where spatch was called.
-
-If not using the kernel's coccicheck target, keep the above precedence
-order logic of .cocciconfig reading. If using the kernel's coccicheck target,
-override any of the kernel's .coccicheck's settings using SPFLAGS.
-
-We help Coccinelle when used against Linux with a set of sensible defaults
-options for Linux with our own Linux .cocciconfig. This hints to coccinelle
-git can be used for 'git grep' queries over coccigrep. A timeout of 200
-seconds should suffice for now.
-
-The options picked up by coccinelle when reading a .cocciconfig do not appear
-as arguments to spatch processes running on your system, to confirm what
-options will be used by Coccinelle run:
-
-      spatch --print-options-only
-
-You can override with your own preferred index option by using SPFLAGS. Take
-note that when there are conflicting options Coccinelle takes precedence for
-the last options passed. Using .cocciconfig is possible to use idutils, however
-given the order of precedence followed by Coccinelle, since the kernel now
-carries its own .cocciconfig, you will need to use SPFLAGS to use idutils if
-desired. See below section "Additional flags" for more details on how to use
-idutils.
-
- Additional flags
-~~~~~~~~~~~~~~~~~~
-
-Additional flags can be passed to spatch through the SPFLAGS
-variable. This works as Coccinelle respects the last flags
-given to it when options are in conflict.
-
-    make SPFLAGS=--use-glimpse coccicheck
-
-Coccinelle supports idutils as well but requires coccinelle >= 1.0.6.
-When no ID file is specified coccinelle assumes your ID database file
-is in the file .id-utils.index on the top level of the kernel, coccinelle
-carries a script scripts/idutils_index.sh which creates the database with
-
-    mkid -i C --output .id-utils.index
-
-If you have another database filename you can also just symlink with this
-name.
-
-    make SPFLAGS=--use-idutils coccicheck
-
-Alternatively you can specify the database filename explicitly, for
-instance:
-
-    make SPFLAGS="--use-idutils /full-path/to/ID" coccicheck
-
-See spatch --help to learn more about spatch options.
-
-Note that the '--use-glimpse' and '--use-idutils' options
-require external tools for indexing the code. None of them is
-thus active by default. However, by indexing the code with
-one of these tools, and according to the cocci file used,
-spatch could proceed the entire code base more quickly.
-
- SmPL patch specific options
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-SmPL patches can have their own requirements for options passed
-to Coccinelle. SmPL patch specific options can be provided by
-providing them at the top of the SmPL patch, for instance:
-
-// Options: --no-includes --include-headers
-
- SmPL patch Coccinelle requirements
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-As Coccinelle features get added some more advanced SmPL patches
-may require newer versions of Coccinelle. If an SmPL patch requires
-at least a version of Coccinelle, this can be specified as follows,
-as an example if requiring at least Coccinelle >= 1.0.5:
-
-// Requires: 1.0.5
-
- Proposing new semantic patches
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-New semantic patches can be proposed and submitted by kernel
-developers. For sake of clarity, they should be organized in the
-sub-directories of 'scripts/coccinelle/'.
-
-
- Detailed description of the 'report' mode
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-'report' generates a list in the following format:
-  file:line:column-column: message
-
-Example:
-
-Running
-
-	make coccicheck MODE=report COCCI=scripts/coccinelle/api/err_cast.cocci
-
-will execute the following part of the SmPL script.
-
-<smpl>
-@r depends on !context && !patch && (org || report)@
-expression x;
-position p;
-@@
-
- ERR_PTR@p(PTR_ERR(x))
-
-@script:python depends on report@
-p << r.p;
-x << r.x;
-@@
-
-msg="ERR_CAST can be used with %s" % (x)
-coccilib.report.print_report(p[0], msg)
-</smpl>
-
-This SmPL excerpt generates entries on the standard output, as
-illustrated below:
-
-/home/user/linux/crypto/ctr.c:188:9-16: ERR_CAST can be used with alg
-/home/user/linux/crypto/authenc.c:619:9-16: ERR_CAST can be used with auth
-/home/user/linux/crypto/xts.c:227:9-16: ERR_CAST can be used with alg
-
-
- Detailed description of the 'patch' mode
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-When the 'patch' mode is available, it proposes a fix for each problem
-identified.
-
-Example:
-
-Running
-	make coccicheck MODE=patch COCCI=scripts/coccinelle/api/err_cast.cocci
-
-will execute the following part of the SmPL script.
-
-<smpl>
-@ depends on !context && patch && !org && !report @
-expression x;
-@@
-
-- ERR_PTR(PTR_ERR(x))
-+ ERR_CAST(x)
-</smpl>
-
-This SmPL excerpt generates patch hunks on the standard output, as
-illustrated below:
-
-diff -u -p a/crypto/ctr.c b/crypto/ctr.c
---- a/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200
-+++ b/crypto/ctr.c 2010-06-03 23:44:49.000000000 +0200
-@@ -185,7 +185,7 @@ static struct crypto_instance *crypto_ct
- 	alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER,
- 				  CRYPTO_ALG_TYPE_MASK);
- 	if (IS_ERR(alg))
--		return ERR_PTR(PTR_ERR(alg));
-+		return ERR_CAST(alg);
- 
- 	/* Block size must be >= 4 bytes. */
- 	err = -EINVAL;
-
- Detailed description of the 'context' mode
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-'context' highlights lines of interest and their context
-in a diff-like style.
-
-NOTE: The diff-like output generated is NOT an applicable patch. The
-      intent of the 'context' mode is to highlight the important lines
-      (annotated with minus, '-') and gives some surrounding context
-      lines around. This output can be used with the diff mode of
-      Emacs to review the code.
-
-Example:
-
-Running
-	make coccicheck MODE=context COCCI=scripts/coccinelle/api/err_cast.cocci
-
-will execute the following part of the SmPL script.
-
-<smpl>
-@ depends on context && !patch && !org && !report@
-expression x;
-@@
-
-* ERR_PTR(PTR_ERR(x))
-</smpl>
-
-This SmPL excerpt generates diff hunks on the standard output, as
-illustrated below:
-
-diff -u -p /home/user/linux/crypto/ctr.c /tmp/nothing
---- /home/user/linux/crypto/ctr.c	2010-05-26 10:49:38.000000000 +0200
-+++ /tmp/nothing
-@@ -185,7 +185,6 @@ static struct crypto_instance *crypto_ct
- 	alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER,
- 				  CRYPTO_ALG_TYPE_MASK);
- 	if (IS_ERR(alg))
--		return ERR_PTR(PTR_ERR(alg));
- 
- 	/* Block size must be >= 4 bytes. */
- 	err = -EINVAL;
-
- Detailed description of the 'org' mode
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-'org' generates a report in the Org mode format of Emacs.
-
-Example:
-
-Running
-	make coccicheck MODE=org COCCI=scripts/coccinelle/api/err_cast.cocci
-
-will execute the following part of the SmPL script.
-
-<smpl>
-@r depends on !context && !patch && (org || report)@
-expression x;
-position p;
-@@
-
- ERR_PTR@p(PTR_ERR(x))
-
-@script:python depends on org@
-p << r.p;
-x << r.x;
-@@
-
-msg="ERR_CAST can be used with %s" % (x)
-msg_safe=msg.replace("[","@(").replace("]",")")
-coccilib.org.print_todo(p[0], msg_safe)
-</smpl>
-
-This SmPL excerpt generates Org entries on the standard output, as
-illustrated below:
-
-* TODO [[view:/home/user/linux/crypto/ctr.c::face=ovl-face1::linb=188::colb=9::cole=16][ERR_CAST can be used with alg]]
-* TODO [[view:/home/user/linux/crypto/authenc.c::face=ovl-face1::linb=619::colb=9::cole=16][ERR_CAST can be used with auth]]
-* TODO [[view:/home/user/linux/crypto/xts.c::face=ovl-face1::linb=227::colb=9::cole=16][ERR_CAST can be used with alg]]
diff --git a/Documentation/conf.py b/Documentation/conf.py
index 106ae9c..0cc8765 100644
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -14,11 +14,17 @@
 
 import sys
 import os
+import sphinx
+
+# Get Sphinx version
+major, minor, patch = map(int, sphinx.__version__.split("."))
+
 
 # If extensions (or modules to document with autodoc) are in another directory,
 # add these directories to sys.path here. If the directory is relative to the
 # documentation root, use os.path.abspath to make it absolute, like shown here.
 sys.path.insert(0, os.path.abspath('sphinx'))
+from load_config import loadConfig
 
 # -- General configuration ------------------------------------------------
 
@@ -28,14 +34,13 @@
 # Add any Sphinx extension module names here, as strings. They can be
 # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
 # ones.
-extensions = ['kernel-doc', 'rstFlatTable', 'kernel_include']
+extensions = ['kernel-doc', 'rstFlatTable', 'kernel_include', 'cdomain']
 
-# Gracefully handle missing rst2pdf.
-try:
-    import rst2pdf
-    extensions += ['rst2pdf.pdfbuilder']
-except ImportError:
-    pass
+# The name of the math extension changed on Sphinx 1.4
+if minor > 3:
+    extensions.append("sphinx.ext.imgmath")
+else:
+    extensions.append("sphinx.ext.pngmath")
 
 # Add any paths that contain templates here, relative to this directory.
 templates_path = ['_templates']
@@ -252,23 +257,90 @@
 
 latex_elements = {
 # The paper size ('letterpaper' or 'a4paper').
-#'papersize': 'letterpaper',
+'papersize': 'a4paper',
 
 # The font size ('10pt', '11pt' or '12pt').
-#'pointsize': '10pt',
-
-# Additional stuff for the LaTeX preamble.
-#'preamble': '',
+'pointsize': '8pt',
 
 # Latex figure (float) alignment
 #'figure_align': 'htbp',
+
+# Don't mangle with UTF-8 chars
+'inputenc': '',
+'utf8extra': '',
+
+# Additional stuff for the LaTeX preamble.
+    'preamble': '''
+	% Adjust margins
+	\\usepackage[margin=0.5in, top=1in, bottom=1in]{geometry}
+
+        % Allow generate some pages in landscape
+        \\usepackage{lscape}
+
+        % Put notes in color and let them be inside a table
+	\\definecolor{NoteColor}{RGB}{204,255,255}
+	\\definecolor{WarningColor}{RGB}{255,204,204}
+	\\definecolor{AttentionColor}{RGB}{255,255,204}
+	\\definecolor{OtherColor}{RGB}{204,204,204}
+        \\newlength{\\mynoticelength}
+        \\makeatletter\\newenvironment{coloredbox}[1]{%
+	   \\setlength{\\fboxrule}{1pt}
+	   \\setlength{\\fboxsep}{7pt}
+	   \\setlength{\\mynoticelength}{\\linewidth}
+	   \\addtolength{\\mynoticelength}{-2\\fboxsep}
+	   \\addtolength{\\mynoticelength}{-2\\fboxrule}
+           \\begin{lrbox}{\\@tempboxa}\\begin{minipage}{\\mynoticelength}}{\\end{minipage}\\end{lrbox}%
+	   \\ifthenelse%
+	      {\\equal{\\py@noticetype}{note}}%
+	      {\\colorbox{NoteColor}{\\usebox{\\@tempboxa}}}%
+	      {%
+	         \\ifthenelse%
+	         {\\equal{\\py@noticetype}{warning}}%
+	         {\\colorbox{WarningColor}{\\usebox{\\@tempboxa}}}%
+		 {%
+	            \\ifthenelse%
+	            {\\equal{\\py@noticetype}{attention}}%
+	            {\\colorbox{AttentionColor}{\\usebox{\\@tempboxa}}}%
+	            {\\colorbox{OtherColor}{\\usebox{\\@tempboxa}}}%
+		 }%
+	      }%
+        }\\makeatother
+
+        \\makeatletter
+        \\renewenvironment{notice}[2]{%
+          \\def\\py@noticetype{#1}
+          \\begin{coloredbox}{#1}
+          \\bf\\it
+          \\par\\strong{#2}
+          \\csname py@noticestart@#1\\endcsname
+        }
+	{
+          \\csname py@noticeend@\\py@noticetype\\endcsname
+          \\end{coloredbox}
+        }
+	\\makeatother
+
+	% Use some font with UTF-8 support with XeLaTeX
+        \\usepackage{fontspec}
+        \\setsansfont{DejaVu Serif}
+        \\setromanfont{DejaVu Sans}
+        \\setmonofont{DejaVu Sans Mono}
+
+	% To allow adjusting table sizes
+	\\usepackage{adjustbox}
+
+     '''
 }
 
 # Grouping the document tree into LaTeX files. List of tuples
 # (source start file, target name, title,
 #  author, documentclass [howto, manual, or own class]).
 latex_documents = [
-    (master_doc, 'TheLinuxKernel.tex', 'The Linux Kernel Documentation',
+    ('kernel-documentation', 'kernel-documentation.tex', 'The Linux Kernel Documentation',
+     'The kernel development community', 'manual'),
+    ('development-process/index', 'development-process.tex', 'Linux Kernel Development Documentation',
+     'The kernel development community', 'manual'),
+    ('gpu/index', 'gpu.tex', 'Linux GPU Driver Developer\'s Guide',
      'The kernel development community', 'manual'),
 ]
 
@@ -419,3 +491,9 @@
 # line arguments.
 kerneldoc_bin = '../scripts/kernel-doc'
 kerneldoc_srctree = '..'
+
+# ------------------------------------------------------------------------------
+# Since loadConfig overwrites settings from the global namespace, it has to be
+# the last statement in the conf.py file
+# ------------------------------------------------------------------------------
+loadConfig(globals())
diff --git a/Documentation/dev-tools/coccinelle.rst b/Documentation/dev-tools/coccinelle.rst
new file mode 100644
index 0000000..4a64b4c
--- /dev/null
+++ b/Documentation/dev-tools/coccinelle.rst
@@ -0,0 +1,491 @@
+.. Copyright 2010 Nicolas Palix <npalix@diku.dk>
+.. Copyright 2010 Julia Lawall <julia@diku.dk>
+.. Copyright 2010 Gilles Muller <Gilles.Muller@lip6.fr>
+
+.. highlight:: none
+
+Coccinelle
+==========
+
+Coccinelle is a tool for pattern matching and text transformation that has
+many uses in kernel development, including the application of complex,
+tree-wide patches and detection of problematic programming patterns.
+
+Getting Coccinelle
+-------------------
+
+The semantic patches included in the kernel use features and options
+which are provided by Coccinelle version 1.0.0-rc11 and above.
+Using earlier versions will fail as the option names used by
+the Coccinelle files and coccicheck have been updated.
+
+Coccinelle is available through the package manager
+of many distributions, e.g. :
+
+ - Debian
+ - Fedora
+ - Ubuntu
+ - OpenSUSE
+ - Arch Linux
+ - NetBSD
+ - FreeBSD
+
+You can get the latest version released from the Coccinelle homepage at
+http://coccinelle.lip6.fr/
+
+Information and tips about Coccinelle are also provided on the wiki
+pages at http://cocci.ekstranet.diku.dk/wiki/doku.php
+
+Once you have it, run the following command::
+
+     	./configure
+        make
+
+as a regular user, and install it with::
+
+        sudo make install
+
+Supplemental documentation
+---------------------------
+
+For supplemental documentation refer to the wiki:
+
+https://bottest.wiki.kernel.org/coccicheck
+
+The wiki documentation always refers to the linux-next version of the script.
+
+Using Coccinelle on the Linux kernel
+------------------------------------
+
+A Coccinelle-specific target is defined in the top level
+Makefile. This target is named ``coccicheck`` and calls the ``coccicheck``
+front-end in the ``scripts`` directory.
+
+Four basic modes are defined: ``patch``, ``report``, ``context``, and
+``org``. The mode to use is specified by setting the MODE variable with
+``MODE=<mode>``.
+
+- ``patch`` proposes a fix, when possible.
+
+- ``report`` generates a list in the following format:
+  file:line:column-column: message
+
+- ``context`` highlights lines of interest and their context in a
+  diff-like style.Lines of interest are indicated with ``-``.
+
+- ``org`` generates a report in the Org mode format of Emacs.
+
+Note that not all semantic patches implement all modes. For easy use
+of Coccinelle, the default mode is "report".
+
+Two other modes provide some common combinations of these modes.
+
+- ``chain`` tries the previous modes in the order above until one succeeds.
+
+- ``rep+ctxt`` runs successively the report mode and the context mode.
+  It should be used with the C option (described later)
+  which checks the code on a file basis.
+
+Examples
+~~~~~~~~
+
+To make a report for every semantic patch, run the following command::
+
+		make coccicheck MODE=report
+
+To produce patches, run::
+
+		make coccicheck MODE=patch
+
+
+The coccicheck target applies every semantic patch available in the
+sub-directories of ``scripts/coccinelle`` to the entire Linux kernel.
+
+For each semantic patch, a commit message is proposed.  It gives a
+description of the problem being checked by the semantic patch, and
+includes a reference to Coccinelle.
+
+As any static code analyzer, Coccinelle produces false
+positives. Thus, reports must be carefully checked, and patches
+reviewed.
+
+To enable verbose messages set the V= variable, for example::
+
+   make coccicheck MODE=report V=1
+
+Coccinelle parallelization
+---------------------------
+
+By default, coccicheck tries to run as parallel as possible. To change
+the parallelism, set the J= variable. For example, to run across 4 CPUs::
+
+   make coccicheck MODE=report J=4
+
+As of Coccinelle 1.0.2 Coccinelle uses Ocaml parmap for parallelization,
+if support for this is detected you will benefit from parmap parallelization.
+
+When parmap is enabled coccicheck will enable dynamic load balancing by using
+``--chunksize 1`` argument, this ensures we keep feeding threads with work
+one by one, so that we avoid the situation where most work gets done by only
+a few threads. With dynamic load balancing, if a thread finishes early we keep
+feeding it more work.
+
+When parmap is enabled, if an error occurs in Coccinelle, this error
+value is propagated back, the return value of the ``make coccicheck``
+captures this return value.
+
+Using Coccinelle with a single semantic patch
+---------------------------------------------
+
+The optional make variable COCCI can be used to check a single
+semantic patch. In that case, the variable must be initialized with
+the name of the semantic patch to apply.
+
+For instance::
+
+	make coccicheck COCCI=<my_SP.cocci> MODE=patch
+
+or::
+
+	make coccicheck COCCI=<my_SP.cocci> MODE=report
+
+
+Controlling Which Files are Processed by Coccinelle
+---------------------------------------------------
+
+By default the entire kernel source tree is checked.
+
+To apply Coccinelle to a specific directory, ``M=`` can be used.
+For example, to check drivers/net/wireless/ one may write::
+
+    make coccicheck M=drivers/net/wireless/
+
+To apply Coccinelle on a file basis, instead of a directory basis, the
+following command may be used::
+
+    make C=1 CHECK="scripts/coccicheck"
+
+To check only newly edited code, use the value 2 for the C flag, i.e.::
+
+    make C=2 CHECK="scripts/coccicheck"
+
+In these modes, which works on a file basis, there is no information
+about semantic patches displayed, and no commit message proposed.
+
+This runs every semantic patch in scripts/coccinelle by default. The
+COCCI variable may additionally be used to only apply a single
+semantic patch as shown in the previous section.
+
+The "report" mode is the default. You can select another one with the
+MODE variable explained above.
+
+Debugging Coccinelle SmPL patches
+---------------------------------
+
+Using coccicheck is best as it provides in the spatch command line
+include options matching the options used when we compile the kernel.
+You can learn what these options are by using V=1, you could then
+manually run Coccinelle with debug options added.
+
+Alternatively you can debug running Coccinelle against SmPL patches
+by asking for stderr to be redirected to stderr, by default stderr
+is redirected to /dev/null, if you'd like to capture stderr you
+can specify the ``DEBUG_FILE="file.txt"`` option to coccicheck. For
+instance::
+
+    rm -f cocci.err
+    make coccicheck COCCI=scripts/coccinelle/free/kfree.cocci MODE=report DEBUG_FILE=cocci.err
+    cat cocci.err
+
+You can use SPFLAGS to add debugging flags, for instance you may want to
+add both --profile --show-trying to SPFLAGS when debugging. For instance
+you may want to use::
+
+    rm -f err.log
+    export COCCI=scripts/coccinelle/misc/irqf_oneshot.cocci
+    make coccicheck DEBUG_FILE="err.log" MODE=report SPFLAGS="--profile --show-trying" M=./drivers/mfd/arizona-irq.c
+
+err.log will now have the profiling information, while stdout will
+provide some progress information as Coccinelle moves forward with
+work.
+
+DEBUG_FILE support is only supported when using coccinelle >= 1.2.
+
+.cocciconfig support
+--------------------
+
+Coccinelle supports reading .cocciconfig for default Coccinelle options that
+should be used every time spatch is spawned, the order of precedence for
+variables for .cocciconfig is as follows:
+
+- Your current user's home directory is processed first
+- Your directory from which spatch is called is processed next
+- The directory provided with the --dir option is processed last, if used
+
+Since coccicheck runs through make, it naturally runs from the kernel
+proper dir, as such the second rule above would be implied for picking up a
+.cocciconfig when using ``make coccicheck``.
+
+``make coccicheck`` also supports using M= targets.If you do not supply
+any M= target, it is assumed you want to target the entire kernel.
+The kernel coccicheck script has::
+
+    if [ "$KBUILD_EXTMOD" = "" ] ; then
+        OPTIONS="--dir $srctree $COCCIINCLUDE"
+    else
+        OPTIONS="--dir $KBUILD_EXTMOD $COCCIINCLUDE"
+    fi
+
+KBUILD_EXTMOD is set when an explicit target with M= is used. For both cases
+the spatch --dir argument is used, as such third rule applies when whether M=
+is used or not, and when M= is used the target directory can have its own
+.cocciconfig file. When M= is not passed as an argument to coccicheck the
+target directory is the same as the directory from where spatch was called.
+
+If not using the kernel's coccicheck target, keep the above precedence
+order logic of .cocciconfig reading. If using the kernel's coccicheck target,
+override any of the kernel's .coccicheck's settings using SPFLAGS.
+
+We help Coccinelle when used against Linux with a set of sensible defaults
+options for Linux with our own Linux .cocciconfig. This hints to coccinelle
+git can be used for ``git grep`` queries over coccigrep. A timeout of 200
+seconds should suffice for now.
+
+The options picked up by coccinelle when reading a .cocciconfig do not appear
+as arguments to spatch processes running on your system, to confirm what
+options will be used by Coccinelle run::
+
+      spatch --print-options-only
+
+You can override with your own preferred index option by using SPFLAGS. Take
+note that when there are conflicting options Coccinelle takes precedence for
+the last options passed. Using .cocciconfig is possible to use idutils, however
+given the order of precedence followed by Coccinelle, since the kernel now
+carries its own .cocciconfig, you will need to use SPFLAGS to use idutils if
+desired. See below section "Additional flags" for more details on how to use
+idutils.
+
+Additional flags
+----------------
+
+Additional flags can be passed to spatch through the SPFLAGS
+variable. This works as Coccinelle respects the last flags
+given to it when options are in conflict. ::
+
+    make SPFLAGS=--use-glimpse coccicheck
+
+Coccinelle supports idutils as well but requires coccinelle >= 1.0.6.
+When no ID file is specified coccinelle assumes your ID database file
+is in the file .id-utils.index on the top level of the kernel, coccinelle
+carries a script scripts/idutils_index.sh which creates the database with::
+
+    mkid -i C --output .id-utils.index
+
+If you have another database filename you can also just symlink with this
+name. ::
+
+    make SPFLAGS=--use-idutils coccicheck
+
+Alternatively you can specify the database filename explicitly, for
+instance::
+
+    make SPFLAGS="--use-idutils /full-path/to/ID" coccicheck
+
+See ``spatch --help`` to learn more about spatch options.
+
+Note that the ``--use-glimpse`` and ``--use-idutils`` options
+require external tools for indexing the code. None of them is
+thus active by default. However, by indexing the code with
+one of these tools, and according to the cocci file used,
+spatch could proceed the entire code base more quickly.
+
+SmPL patch specific options
+---------------------------
+
+SmPL patches can have their own requirements for options passed
+to Coccinelle. SmPL patch specific options can be provided by
+providing them at the top of the SmPL patch, for instance::
+
+	// Options: --no-includes --include-headers
+
+SmPL patch Coccinelle requirements
+----------------------------------
+
+As Coccinelle features get added some more advanced SmPL patches
+may require newer versions of Coccinelle. If an SmPL patch requires
+at least a version of Coccinelle, this can be specified as follows,
+as an example if requiring at least Coccinelle >= 1.0.5::
+
+	// Requires: 1.0.5
+
+Proposing new semantic patches
+-------------------------------
+
+New semantic patches can be proposed and submitted by kernel
+developers. For sake of clarity, they should be organized in the
+sub-directories of ``scripts/coccinelle/``.
+
+
+Detailed description of the ``report`` mode
+-------------------------------------------
+
+``report`` generates a list in the following format::
+
+  file:line:column-column: message
+
+Example
+~~~~~~~
+
+Running::
+
+	make coccicheck MODE=report COCCI=scripts/coccinelle/api/err_cast.cocci
+
+will execute the following part of the SmPL script::
+
+   <smpl>
+   @r depends on !context && !patch && (org || report)@
+   expression x;
+   position p;
+   @@
+
+     ERR_PTR@p(PTR_ERR(x))
+
+   @script:python depends on report@
+   p << r.p;
+   x << r.x;
+   @@
+
+   msg="ERR_CAST can be used with %s" % (x)
+   coccilib.report.print_report(p[0], msg)
+   </smpl>
+
+This SmPL excerpt generates entries on the standard output, as
+illustrated below::
+
+    /home/user/linux/crypto/ctr.c:188:9-16: ERR_CAST can be used with alg
+    /home/user/linux/crypto/authenc.c:619:9-16: ERR_CAST can be used with auth
+    /home/user/linux/crypto/xts.c:227:9-16: ERR_CAST can be used with alg
+
+
+Detailed description of the ``patch`` mode
+------------------------------------------
+
+When the ``patch`` mode is available, it proposes a fix for each problem
+identified.
+
+Example
+~~~~~~~
+
+Running::
+
+	make coccicheck MODE=patch COCCI=scripts/coccinelle/api/err_cast.cocci
+
+will execute the following part of the SmPL script::
+
+    <smpl>
+    @ depends on !context && patch && !org && !report @
+    expression x;
+    @@
+
+    - ERR_PTR(PTR_ERR(x))
+    + ERR_CAST(x)
+    </smpl>
+
+This SmPL excerpt generates patch hunks on the standard output, as
+illustrated below::
+
+    diff -u -p a/crypto/ctr.c b/crypto/ctr.c
+    --- a/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200
+    +++ b/crypto/ctr.c 2010-06-03 23:44:49.000000000 +0200
+    @@ -185,7 +185,7 @@ static struct crypto_instance *crypto_ct
+ 	alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER,
+ 				  CRYPTO_ALG_TYPE_MASK);
+ 	if (IS_ERR(alg))
+    -		return ERR_PTR(PTR_ERR(alg));
+    +		return ERR_CAST(alg);
+
+ 	/* Block size must be >= 4 bytes. */
+ 	err = -EINVAL;
+
+Detailed description of the ``context`` mode
+--------------------------------------------
+
+``context`` highlights lines of interest and their context
+in a diff-like style.
+
+      **NOTE**: The diff-like output generated is NOT an applicable patch. The
+      intent of the ``context`` mode is to highlight the important lines
+      (annotated with minus, ``-``) and gives some surrounding context
+      lines around. This output can be used with the diff mode of
+      Emacs to review the code.
+
+Example
+~~~~~~~
+
+Running::
+
+	make coccicheck MODE=context COCCI=scripts/coccinelle/api/err_cast.cocci
+
+will execute the following part of the SmPL script::
+
+    <smpl>
+    @ depends on context && !patch && !org && !report@
+    expression x;
+    @@
+
+    * ERR_PTR(PTR_ERR(x))
+    </smpl>
+
+This SmPL excerpt generates diff hunks on the standard output, as
+illustrated below::
+
+    diff -u -p /home/user/linux/crypto/ctr.c /tmp/nothing
+    --- /home/user/linux/crypto/ctr.c	2010-05-26 10:49:38.000000000 +0200
+    +++ /tmp/nothing
+    @@ -185,7 +185,6 @@ static struct crypto_instance *crypto_ct
+ 	alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER,
+ 				  CRYPTO_ALG_TYPE_MASK);
+ 	if (IS_ERR(alg))
+    -		return ERR_PTR(PTR_ERR(alg));
+
+ 	/* Block size must be >= 4 bytes. */
+ 	err = -EINVAL;
+
+Detailed description of the ``org`` mode
+----------------------------------------
+
+``org`` generates a report in the Org mode format of Emacs.
+
+Example
+~~~~~~~
+
+Running::
+
+	make coccicheck MODE=org COCCI=scripts/coccinelle/api/err_cast.cocci
+
+will execute the following part of the SmPL script::
+
+    <smpl>
+    @r depends on !context && !patch && (org || report)@
+    expression x;
+    position p;
+    @@
+
+      ERR_PTR@p(PTR_ERR(x))
+
+    @script:python depends on org@
+    p << r.p;
+    x << r.x;
+    @@
+
+    msg="ERR_CAST can be used with %s" % (x)
+    msg_safe=msg.replace("[","@(").replace("]",")")
+    coccilib.org.print_todo(p[0], msg_safe)
+    </smpl>
+
+This SmPL excerpt generates Org entries on the standard output, as
+illustrated below::
+
+    * TODO [[view:/home/user/linux/crypto/ctr.c::face=ovl-face1::linb=188::colb=9::cole=16][ERR_CAST can be used with alg]]
+    * TODO [[view:/home/user/linux/crypto/authenc.c::face=ovl-face1::linb=619::colb=9::cole=16][ERR_CAST can be used with auth]]
+    * TODO [[view:/home/user/linux/crypto/xts.c::face=ovl-face1::linb=227::colb=9::cole=16][ERR_CAST can be used with alg]]
diff --git a/Documentation/dev-tools/gcov.rst b/Documentation/dev-tools/gcov.rst
new file mode 100644
index 0000000..19eedfe
--- /dev/null
+++ b/Documentation/dev-tools/gcov.rst
@@ -0,0 +1,256 @@
+Using gcov with the Linux kernel
+================================
+
+gcov profiling kernel support enables the use of GCC's coverage testing
+tool gcov_ with the Linux kernel. Coverage data of a running kernel
+is exported in gcov-compatible format via the "gcov" debugfs directory.
+To get coverage data for a specific file, change to the kernel build
+directory and use gcov with the ``-o`` option as follows (requires root)::
+
+    # cd /tmp/linux-out
+    # gcov -o /sys/kernel/debug/gcov/tmp/linux-out/kernel spinlock.c
+
+This will create source code files annotated with execution counts
+in the current directory. In addition, graphical gcov front-ends such
+as lcov_ can be used to automate the process of collecting data
+for the entire kernel and provide coverage overviews in HTML format.
+
+Possible uses:
+
+* debugging (has this line been reached at all?)
+* test improvement (how do I change my test to cover these lines?)
+* minimizing kernel configurations (do I need this option if the
+  associated code is never run?)
+
+.. _gcov: http://gcc.gnu.org/onlinedocs/gcc/Gcov.html
+.. _lcov: http://ltp.sourceforge.net/coverage/lcov.php
+
+
+Preparation
+-----------
+
+Configure the kernel with::
+
+        CONFIG_DEBUG_FS=y
+        CONFIG_GCOV_KERNEL=y
+
+select the gcc's gcov format, default is autodetect based on gcc version::
+
+        CONFIG_GCOV_FORMAT_AUTODETECT=y
+
+and to get coverage data for the entire kernel::
+
+        CONFIG_GCOV_PROFILE_ALL=y
+
+Note that kernels compiled with profiling flags will be significantly
+larger and run slower. Also CONFIG_GCOV_PROFILE_ALL may not be supported
+on all architectures.
+
+Profiling data will only become accessible once debugfs has been
+mounted::
+
+        mount -t debugfs none /sys/kernel/debug
+
+
+Customization
+-------------
+
+To enable profiling for specific files or directories, add a line
+similar to the following to the respective kernel Makefile:
+
+- For a single file (e.g. main.o)::
+
+	GCOV_PROFILE_main.o := y
+
+- For all files in one directory::
+
+	GCOV_PROFILE := y
+
+To exclude files from being profiled even when CONFIG_GCOV_PROFILE_ALL
+is specified, use::
+
+	GCOV_PROFILE_main.o := n
+
+and::
+
+	GCOV_PROFILE := n
+
+Only files which are linked to the main kernel image or are compiled as
+kernel modules are supported by this mechanism.
+
+
+Files
+-----
+
+The gcov kernel support creates the following files in debugfs:
+
+``/sys/kernel/debug/gcov``
+	Parent directory for all gcov-related files.
+
+``/sys/kernel/debug/gcov/reset``
+	Global reset file: resets all coverage data to zero when
+        written to.
+
+``/sys/kernel/debug/gcov/path/to/compile/dir/file.gcda``
+	The actual gcov data file as understood by the gcov
+        tool. Resets file coverage data to zero when written to.
+
+``/sys/kernel/debug/gcov/path/to/compile/dir/file.gcno``
+	Symbolic link to a static data file required by the gcov
+        tool. This file is generated by gcc when compiling with
+        option ``-ftest-coverage``.
+
+
+Modules
+-------
+
+Kernel modules may contain cleanup code which is only run during
+module unload time. The gcov mechanism provides a means to collect
+coverage data for such code by keeping a copy of the data associated
+with the unloaded module. This data remains available through debugfs.
+Once the module is loaded again, the associated coverage counters are
+initialized with the data from its previous instantiation.
+
+This behavior can be deactivated by specifying the gcov_persist kernel
+parameter::
+
+        gcov_persist=0
+
+At run-time, a user can also choose to discard data for an unloaded
+module by writing to its data file or the global reset file.
+
+
+Separated build and test machines
+---------------------------------
+
+The gcov kernel profiling infrastructure is designed to work out-of-the
+box for setups where kernels are built and run on the same machine. In
+cases where the kernel runs on a separate machine, special preparations
+must be made, depending on where the gcov tool is used:
+
+a) gcov is run on the TEST machine
+
+    The gcov tool version on the test machine must be compatible with the
+    gcc version used for kernel build. Also the following files need to be
+    copied from build to test machine:
+
+    from the source tree:
+      - all C source files + headers
+
+    from the build tree:
+      - all C source files + headers
+      - all .gcda and .gcno files
+      - all links to directories
+
+    It is important to note that these files need to be placed into the
+    exact same file system location on the test machine as on the build
+    machine. If any of the path components is symbolic link, the actual
+    directory needs to be used instead (due to make's CURDIR handling).
+
+b) gcov is run on the BUILD machine
+
+    The following files need to be copied after each test case from test
+    to build machine:
+
+    from the gcov directory in sysfs:
+      - all .gcda files
+      - all links to .gcno files
+
+    These files can be copied to any location on the build machine. gcov
+    must then be called with the -o option pointing to that directory.
+
+    Example directory setup on the build machine::
+
+      /tmp/linux:    kernel source tree
+      /tmp/out:      kernel build directory as specified by make O=
+      /tmp/coverage: location of the files copied from the test machine
+
+      [user@build] cd /tmp/out
+      [user@build] gcov -o /tmp/coverage/tmp/out/init main.c
+
+
+Troubleshooting
+---------------
+
+Problem
+    Compilation aborts during linker step.
+
+Cause
+    Profiling flags are specified for source files which are not
+    linked to the main kernel or which are linked by a custom
+    linker procedure.
+
+Solution
+    Exclude affected source files from profiling by specifying
+    ``GCOV_PROFILE := n`` or ``GCOV_PROFILE_basename.o := n`` in the
+    corresponding Makefile.
+
+Problem
+    Files copied from sysfs appear empty or incomplete.
+
+Cause
+    Due to the way seq_file works, some tools such as cp or tar
+    may not correctly copy files from sysfs.
+
+Solution
+    Use ``cat``' to read ``.gcda`` files and ``cp -d`` to copy links.
+    Alternatively use the mechanism shown in Appendix B.
+
+
+Appendix A: gather_on_build.sh
+------------------------------
+
+Sample script to gather coverage meta files on the build machine
+(see 6a)::
+
+    #!/bin/bash
+
+    KSRC=$1
+    KOBJ=$2
+    DEST=$3
+
+    if [ -z "$KSRC" ] || [ -z "$KOBJ" ] || [ -z "$DEST" ]; then
+      echo "Usage: $0 <ksrc directory> <kobj directory> <output.tar.gz>" >&2
+      exit 1
+    fi
+
+    KSRC=$(cd $KSRC; printf "all:\n\t@echo \${CURDIR}\n" | make -f -)
+    KOBJ=$(cd $KOBJ; printf "all:\n\t@echo \${CURDIR}\n" | make -f -)
+
+    find $KSRC $KOBJ \( -name '*.gcno' -o -name '*.[ch]' -o -type l \) -a \
+                     -perm /u+r,g+r | tar cfz $DEST -P -T -
+
+    if [ $? -eq 0 ] ; then
+      echo "$DEST successfully created, copy to test system and unpack with:"
+      echo "  tar xfz $DEST -P"
+    else
+      echo "Could not create file $DEST"
+    fi
+
+
+Appendix B: gather_on_test.sh
+-----------------------------
+
+Sample script to gather coverage data files on the test machine
+(see 6b)::
+
+    #!/bin/bash -e
+
+    DEST=$1
+    GCDA=/sys/kernel/debug/gcov
+
+    if [ -z "$DEST" ] ; then
+      echo "Usage: $0 <output.tar.gz>" >&2
+      exit 1
+    fi
+
+    TEMPDIR=$(mktemp -d)
+    echo Collecting data..
+    find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \;
+    find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \;
+    find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \;
+    tar czf $DEST -C $TEMPDIR sys
+    rm -rf $TEMPDIR
+
+    echo "$DEST successfully created, copy to build system and unpack with:"
+    echo "  tar xfz $DEST"
diff --git a/Documentation/gdb-kernel-debugging.txt b/Documentation/dev-tools/gdb-kernel-debugging.rst
similarity index 72%
rename from Documentation/gdb-kernel-debugging.txt
rename to Documentation/dev-tools/gdb-kernel-debugging.rst
index 7050ce8..5e93c9b 100644
--- a/Documentation/gdb-kernel-debugging.txt
+++ b/Documentation/dev-tools/gdb-kernel-debugging.rst
@@ -1,3 +1,5 @@
+.. highlight:: none
+
 Debugging kernel and modules via gdb
 ====================================
 
@@ -13,54 +15,58 @@
 Requirements
 ------------
 
- o gdb 7.2+ (recommended: 7.4+) with python support enabled (typically true
-   for distributions)
+- gdb 7.2+ (recommended: 7.4+) with python support enabled (typically true
+  for distributions)
 
 
 Setup
 -----
 
- o Create a virtual Linux machine for QEMU/KVM (see www.linux-kvm.org and
-   www.qemu.org for more details). For cross-development,
-   http://landley.net/aboriginal/bin keeps a pool of machine images and
-   toolchains that can be helpful to start from.
+- Create a virtual Linux machine for QEMU/KVM (see www.linux-kvm.org and
+  www.qemu.org for more details). For cross-development,
+  http://landley.net/aboriginal/bin keeps a pool of machine images and
+  toolchains that can be helpful to start from.
 
- o Build the kernel with CONFIG_GDB_SCRIPTS enabled, but leave
-   CONFIG_DEBUG_INFO_REDUCED off. If your architecture supports
-   CONFIG_FRAME_POINTER, keep it enabled.
+- Build the kernel with CONFIG_GDB_SCRIPTS enabled, but leave
+  CONFIG_DEBUG_INFO_REDUCED off. If your architecture supports
+  CONFIG_FRAME_POINTER, keep it enabled.
 
- o Install that kernel on the guest.
+- Install that kernel on the guest.
+  Alternatively, QEMU allows to boot the kernel directly using -kernel,
+  -append, -initrd command line switches. This is generally only useful if
+  you do not depend on modules. See QEMU documentation for more details on
+  this mode.
 
-   Alternatively, QEMU allows to boot the kernel directly using -kernel,
-   -append, -initrd command line switches. This is generally only useful if
-   you do not depend on modules. See QEMU documentation for more details on
-   this mode.
+- Enable the gdb stub of QEMU/KVM, either
 
- o Enable the gdb stub of QEMU/KVM, either
     - at VM startup time by appending "-s" to the QEMU command line
-   or
+
+  or
+
     - during runtime by issuing "gdbserver" from the QEMU monitor
       console
 
- o cd /path/to/linux-build
+- cd /path/to/linux-build
 
- o Start gdb: gdb vmlinux
+- Start gdb: gdb vmlinux
 
-   Note: Some distros may restrict auto-loading of gdb scripts to known safe
-   directories. In case gdb reports to refuse loading vmlinux-gdb.py, add
+  Note: Some distros may restrict auto-loading of gdb scripts to known safe
+  directories. In case gdb reports to refuse loading vmlinux-gdb.py, add::
 
     add-auto-load-safe-path /path/to/linux-build
 
-   to ~/.gdbinit. See gdb help for more details.
+  to ~/.gdbinit. See gdb help for more details.
 
- o Attach to the booted guest:
+- Attach to the booted guest::
+
     (gdb) target remote :1234
 
 
 Examples of using the Linux-provided gdb helpers
 ------------------------------------------------
 
- o Load module (and main kernel) symbols:
+- Load module (and main kernel) symbols::
+
     (gdb) lx-symbols
     loading vmlinux
     scanning for modules in /home/user/linux/build
@@ -72,17 +78,20 @@
     ...
     loading @0xffffffffa0000000: /home/user/linux/build/drivers/ata/ata_generic.ko
 
- o Set a breakpoint on some not yet loaded module function, e.g.:
+- Set a breakpoint on some not yet loaded module function, e.g.::
+
     (gdb) b btrfs_init_sysfs
     Function "btrfs_init_sysfs" not defined.
     Make breakpoint pending on future shared library load? (y or [n]) y
     Breakpoint 1 (btrfs_init_sysfs) pending.
 
- o Continue the target
+- Continue the target::
+
     (gdb) c
 
- o Load the module on the target and watch the symbols being loaded as well as
-   the breakpoint hit:
+- Load the module on the target and watch the symbols being loaded as well as
+  the breakpoint hit::
+
     loading @0xffffffffa0034000: /home/user/linux/build/lib/libcrc32c.ko
     loading @0xffffffffa0050000: /home/user/linux/build/lib/lzo/lzo_compress.ko
     loading @0xffffffffa006e000: /home/user/linux/build/lib/zlib_deflate/zlib_deflate.ko
@@ -91,7 +100,8 @@
     Breakpoint 1, btrfs_init_sysfs () at /home/user/linux/fs/btrfs/sysfs.c:36
     36              btrfs_kset = kset_create_and_add("btrfs", NULL, fs_kobj);
 
- o Dump the log buffer of the target kernel:
+- Dump the log buffer of the target kernel::
+
     (gdb) lx-dmesg
     [     0.000000] Initializing cgroup subsys cpuset
     [     0.000000] Initializing cgroup subsys cpu
@@ -102,19 +112,22 @@
     [     0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
     ....
 
- o Examine fields of the current task struct:
+- Examine fields of the current task struct::
+
     (gdb) p $lx_current().pid
     $1 = 4998
     (gdb) p $lx_current().comm
     $2 = "modprobe\000\000\000\000\000\000\000"
 
- o Make use of the per-cpu function for the current or a specified CPU:
+- Make use of the per-cpu function for the current or a specified CPU::
+
     (gdb) p $lx_per_cpu("runqueues").nr_running
     $3 = 1
     (gdb) p $lx_per_cpu("runqueues", 2).nr_running
     $4 = 0
 
- o Dig into hrtimers using the container_of helper:
+- Dig into hrtimers using the container_of helper::
+
     (gdb) set $next = $lx_per_cpu("hrtimer_bases").clock_base[0].active.next
     (gdb) p *$container_of($next, "struct hrtimer", "node")
     $5 = {
@@ -144,7 +157,7 @@
 ------------------------------
 
 The number of commands and convenience functions may evolve over the time,
-this is just a snapshot of the initial version:
+this is just a snapshot of the initial version::
 
  (gdb) apropos lx
  function lx_current -- Return current task
diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst
new file mode 100644
index 0000000..f7a18f2
--- /dev/null
+++ b/Documentation/dev-tools/kasan.rst
@@ -0,0 +1,173 @@
+The Kernel Address Sanitizer (KASAN)
+====================================
+
+Overview
+--------
+
+KernelAddressSANitizer (KASAN) is a dynamic memory error detector. It provides
+a fast and comprehensive solution for finding use-after-free and out-of-bounds
+bugs.
+
+KASAN uses compile-time instrumentation for checking every memory access,
+therefore you will need a GCC version 4.9.2 or later. GCC 5.0 or later is
+required for detection of out-of-bounds accesses to stack or global variables.
+
+Currently KASAN is supported only for the x86_64 and arm64 architectures.
+
+Usage
+-----
+
+To enable KASAN configure kernel with::
+
+	  CONFIG_KASAN = y
+
+and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline and
+inline are compiler instrumentation types. The former produces smaller binary
+the latter is 1.1 - 2 times faster. Inline instrumentation requires a GCC
+version 5.0 or later.
+
+KASAN works with both SLUB and SLAB memory allocators.
+For better bug detection and nicer reporting, enable CONFIG_STACKTRACE.
+
+To disable instrumentation for specific files or directories, add a line
+similar to the following to the respective kernel Makefile:
+
+- For a single file (e.g. main.o)::
+
+    KASAN_SANITIZE_main.o := n
+
+- For all files in one directory::
+
+    KASAN_SANITIZE := n
+
+Error reports
+~~~~~~~~~~~~~
+
+A typical out of bounds access report looks like this::
+
+    ==================================================================
+    BUG: AddressSanitizer: out of bounds access in kmalloc_oob_right+0x65/0x75 [test_kasan] at addr ffff8800693bc5d3
+    Write of size 1 by task modprobe/1689
+    =============================================================================
+    BUG kmalloc-128 (Not tainted): kasan error
+    -----------------------------------------------------------------------------
+
+    Disabling lock debugging due to kernel taint
+    INFO: Allocated in kmalloc_oob_right+0x3d/0x75 [test_kasan] age=0 cpu=0 pid=1689
+     __slab_alloc+0x4b4/0x4f0
+     kmem_cache_alloc_trace+0x10b/0x190
+     kmalloc_oob_right+0x3d/0x75 [test_kasan]
+     init_module+0x9/0x47 [test_kasan]
+     do_one_initcall+0x99/0x200
+     load_module+0x2cb3/0x3b20
+     SyS_finit_module+0x76/0x80
+     system_call_fastpath+0x12/0x17
+    INFO: Slab 0xffffea0001a4ef00 objects=17 used=7 fp=0xffff8800693bd728 flags=0x100000000004080
+    INFO: Object 0xffff8800693bc558 @offset=1368 fp=0xffff8800693bc720
+
+    Bytes b4 ffff8800693bc548: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a  ........ZZZZZZZZ
+    Object ffff8800693bc558: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
+    Object ffff8800693bc568: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
+    Object ffff8800693bc578: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
+    Object ffff8800693bc588: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
+    Object ffff8800693bc598: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
+    Object ffff8800693bc5a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
+    Object ffff8800693bc5b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
+    Object ffff8800693bc5c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5  kkkkkkkkkkkkkkk.
+    Redzone ffff8800693bc5d8: cc cc cc cc cc cc cc cc                          ........
+    Padding ffff8800693bc718: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ
+    CPU: 0 PID: 1689 Comm: modprobe Tainted: G    B          3.18.0-rc1-mm1+ #98
+    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
+     ffff8800693bc000 0000000000000000 ffff8800693bc558 ffff88006923bb78
+     ffffffff81cc68ae 00000000000000f3 ffff88006d407600 ffff88006923bba8
+     ffffffff811fd848 ffff88006d407600 ffffea0001a4ef00 ffff8800693bc558
+    Call Trace:
+     [<ffffffff81cc68ae>] dump_stack+0x46/0x58
+     [<ffffffff811fd848>] print_trailer+0xf8/0x160
+     [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
+     [<ffffffff811ff0f5>] object_err+0x35/0x40
+     [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
+     [<ffffffff8120b9fa>] kasan_report_error+0x38a/0x3f0
+     [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
+     [<ffffffff8120b344>] ? kasan_unpoison_shadow+0x14/0x40
+     [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
+     [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
+     [<ffffffff8120a995>] __asan_store1+0x75/0xb0
+     [<ffffffffa0002601>] ? kmem_cache_oob+0x1d/0xc3 [test_kasan]
+     [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
+     [<ffffffffa0002065>] kmalloc_oob_right+0x65/0x75 [test_kasan]
+     [<ffffffffa00026b0>] init_module+0x9/0x47 [test_kasan]
+     [<ffffffff810002d9>] do_one_initcall+0x99/0x200
+     [<ffffffff811e4e5c>] ? __vunmap+0xec/0x160
+     [<ffffffff81114f63>] load_module+0x2cb3/0x3b20
+     [<ffffffff8110fd70>] ? m_show+0x240/0x240
+     [<ffffffff81115f06>] SyS_finit_module+0x76/0x80
+     [<ffffffff81cd3129>] system_call_fastpath+0x12/0x17
+    Memory state around the buggy address:
+     ffff8800693bc300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+     ffff8800693bc380: fc fc 00 00 00 00 00 00 00 00 00 00 00 00 00 fc
+     ffff8800693bc400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+     ffff8800693bc480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+     ffff8800693bc500: fc fc fc fc fc fc fc fc fc fc fc 00 00 00 00 00
+    >ffff8800693bc580: 00 00 00 00 00 00 00 00 00 00 03 fc fc fc fc fc
+                                                 ^
+     ffff8800693bc600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+     ffff8800693bc680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+     ffff8800693bc700: fc fc fc fc fb fb fb fb fb fb fb fb fb fb fb fb
+     ffff8800693bc780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
+     ffff8800693bc800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
+    ==================================================================
+
+The header of the report discribe what kind of bug happened and what kind of
+access caused it. It's followed by the description of the accessed slub object
+(see 'SLUB Debug output' section in Documentation/vm/slub.txt for details) and
+the description of the accessed memory page.
+
+In the last section the report shows memory state around the accessed address.
+Reading this part requires some understanding of how KASAN works.
+
+The state of each 8 aligned bytes of memory is encoded in one shadow byte.
+Those 8 bytes can be accessible, partially accessible, freed or be a redzone.
+We use the following encoding for each shadow byte: 0 means that all 8 bytes
+of the corresponding memory region are accessible; number N (1 <= N <= 7) means
+that the first N bytes are accessible, and other (8 - N) bytes are not;
+any negative value indicates that the entire 8-byte word is inaccessible.
+We use different negative values to distinguish between different kinds of
+inaccessible memory like redzones or freed memory (see mm/kasan/kasan.h).
+
+In the report above the arrows point to the shadow byte 03, which means that
+the accessed address is partially accessible.
+
+
+Implementation details
+----------------------
+
+From a high level, our approach to memory error detection is similar to that
+of kmemcheck: use shadow memory to record whether each byte of memory is safe
+to access, and use compile-time instrumentation to check shadow memory on each
+memory access.
+
+AddressSanitizer dedicates 1/8 of kernel memory to its shadow memory
+(e.g. 16TB to cover 128TB on x86_64) and uses direct mapping with a scale and
+offset to translate a memory address to its corresponding shadow address.
+
+Here is the function which translates an address to its corresponding shadow
+address::
+
+    static inline void *kasan_mem_to_shadow(const void *addr)
+    {
+	return ((unsigned long)addr >> KASAN_SHADOW_SCALE_SHIFT)
+		+ KASAN_SHADOW_OFFSET;
+    }
+
+where ``KASAN_SHADOW_SCALE_SHIFT = 3``.
+
+Compile-time instrumentation used for checking memory accesses. Compiler inserts
+function calls (__asan_load*(addr), __asan_store*(addr)) before each memory
+access of size 1, 2, 4, 8 or 16. These functions check whether memory access is
+valid or not by checking corresponding shadow memory.
+
+GCC 5.0 has possibility to perform inline instrumentation. Instead of making
+function calls GCC directly inserts the code to check the shadow memory.
+This option significantly enlarges kernel but it gives x1.1-x2 performance
+boost over outline instrumented kernel.
diff --git a/Documentation/kcov.txt b/Documentation/dev-tools/kcov.rst
similarity index 77%
rename from Documentation/kcov.txt
rename to Documentation/dev-tools/kcov.rst
index 779ff4a..aca0e27 100644
--- a/Documentation/kcov.txt
+++ b/Documentation/dev-tools/kcov.rst
@@ -12,38 +12,38 @@
 and instrumentation of some inherently non-deterministic parts of kernel is
 disbled (e.g. scheduler, locking).
 
-Usage:
-======
+Usage
+-----
 
-Configure kernel with:
+Configure the kernel with::
 
         CONFIG_KCOV=y
 
 CONFIG_KCOV requires gcc built on revision 231296 or later.
-Profiling data will only become accessible once debugfs has been mounted:
+Profiling data will only become accessible once debugfs has been mounted::
 
         mount -t debugfs none /sys/kernel/debug
 
-The following program demonstrates kcov usage from within a test program:
+The following program demonstrates kcov usage from within a test program::
 
-#include <stdio.h>
-#include <stddef.h>
-#include <stdint.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/ioctl.h>
-#include <sys/mman.h>
-#include <unistd.h>
-#include <fcntl.h>
+    #include <stdio.h>
+    #include <stddef.h>
+    #include <stdint.h>
+    #include <stdlib.h>
+    #include <sys/types.h>
+    #include <sys/stat.h>
+    #include <sys/ioctl.h>
+    #include <sys/mman.h>
+    #include <unistd.h>
+    #include <fcntl.h>
 
-#define KCOV_INIT_TRACE			_IOR('c', 1, unsigned long)
-#define KCOV_ENABLE			_IO('c', 100)
-#define KCOV_DISABLE			_IO('c', 101)
-#define COVER_SIZE			(64<<10)
+    #define KCOV_INIT_TRACE			_IOR('c', 1, unsigned long)
+    #define KCOV_ENABLE			_IO('c', 100)
+    #define KCOV_DISABLE			_IO('c', 101)
+    #define COVER_SIZE			(64<<10)
 
-int main(int argc, char **argv)
-{
+    int main(int argc, char **argv)
+    {
 	int fd;
 	unsigned long *cover, n, i;
 
@@ -83,24 +83,24 @@
 	if (close(fd))
 		perror("close"), exit(1);
 	return 0;
-}
+    }
 
-After piping through addr2line output of the program looks as follows:
+After piping through addr2line output of the program looks as follows::
 
-SyS_read
-fs/read_write.c:562
-__fdget_pos
-fs/file.c:774
-__fget_light
-fs/file.c:746
-__fget_light
-fs/file.c:750
-__fget_light
-fs/file.c:760
-__fdget_pos
-fs/file.c:784
-SyS_read
-fs/read_write.c:562
+    SyS_read
+    fs/read_write.c:562
+    __fdget_pos
+    fs/file.c:774
+    __fget_light
+    fs/file.c:746
+    __fget_light
+    fs/file.c:750
+    __fget_light
+    fs/file.c:760
+    __fdget_pos
+    fs/file.c:784
+    SyS_read
+    fs/read_write.c:562
 
 If a program needs to collect coverage from several threads (independently),
 it needs to open /sys/kernel/debug/kcov in each thread separately.
diff --git a/Documentation/dev-tools/kmemcheck.rst b/Documentation/dev-tools/kmemcheck.rst
new file mode 100644
index 0000000..7f3d198
--- /dev/null
+++ b/Documentation/dev-tools/kmemcheck.rst
@@ -0,0 +1,733 @@
+Getting started with kmemcheck
+==============================
+
+Vegard Nossum <vegardno@ifi.uio.no>
+
+
+Introduction
+------------
+
+kmemcheck is a debugging feature for the Linux Kernel. More specifically, it
+is a dynamic checker that detects and warns about some uses of uninitialized
+memory.
+
+Userspace programmers might be familiar with Valgrind's memcheck. The main
+difference between memcheck and kmemcheck is that memcheck works for userspace
+programs only, and kmemcheck works for the kernel only. The implementations
+are of course vastly different. Because of this, kmemcheck is not as accurate
+as memcheck, but it turns out to be good enough in practice to discover real
+programmer errors that the compiler is not able to find through static
+analysis.
+
+Enabling kmemcheck on a kernel will probably slow it down to the extent that
+the machine will not be usable for normal workloads such as e.g. an
+interactive desktop. kmemcheck will also cause the kernel to use about twice
+as much memory as normal. For this reason, kmemcheck is strictly a debugging
+feature.
+
+
+Downloading
+-----------
+
+As of version 2.6.31-rc1, kmemcheck is included in the mainline kernel.
+
+
+Configuring and compiling
+-------------------------
+
+kmemcheck only works for the x86 (both 32- and 64-bit) platform. A number of
+configuration variables must have specific settings in order for the kmemcheck
+menu to even appear in "menuconfig". These are:
+
+- ``CONFIG_CC_OPTIMIZE_FOR_SIZE=n``
+	This option is located under "General setup" / "Optimize for size".
+
+	Without this, gcc will use certain optimizations that usually lead to
+	false positive warnings from kmemcheck. An example of this is a 16-bit
+	field in a struct, where gcc may load 32 bits, then discard the upper
+	16 bits. kmemcheck sees only the 32-bit load, and may trigger a
+	warning for the upper 16 bits (if they're uninitialized).
+
+- ``CONFIG_SLAB=y`` or ``CONFIG_SLUB=y``
+	This option is located under "General setup" / "Choose SLAB
+	allocator".
+
+- ``CONFIG_FUNCTION_TRACER=n``
+	This option is located under "Kernel hacking" / "Tracers" / "Kernel
+	Function Tracer"
+
+	When function tracing is compiled in, gcc emits a call to another
+	function at the beginning of every function. This means that when the
+	page fault handler is called, the ftrace framework will be called
+	before kmemcheck has had a chance to handle the fault. If ftrace then
+	modifies memory that was tracked by kmemcheck, the result is an
+	endless recursive page fault.
+
+- ``CONFIG_DEBUG_PAGEALLOC=n``
+	This option is located under "Kernel hacking" / "Memory Debugging"
+	/ "Debug page memory allocations".
+
+In addition, I highly recommend turning on ``CONFIG_DEBUG_INFO=y``. This is also
+located under "Kernel hacking". With this, you will be able to get line number
+information from the kmemcheck warnings, which is extremely valuable in
+debugging a problem. This option is not mandatory, however, because it slows
+down the compilation process and produces a much bigger kernel image.
+
+Now the kmemcheck menu should be visible (under "Kernel hacking" / "Memory
+Debugging" / "kmemcheck: trap use of uninitialized memory"). Here follows
+a description of the kmemcheck configuration variables:
+
+- ``CONFIG_KMEMCHECK``
+	This must be enabled in order to use kmemcheck at all...
+
+- ``CONFIG_KMEMCHECK_``[``DISABLED`` | ``ENABLED`` | ``ONESHOT``]``_BY_DEFAULT``
+	This option controls the status of kmemcheck at boot-time. "Enabled"
+	will enable kmemcheck right from the start, "disabled" will boot the
+	kernel as normal (but with the kmemcheck code compiled in, so it can
+	be enabled at run-time after the kernel has booted), and "one-shot" is
+	a special mode which will turn kmemcheck off automatically after
+	detecting the first use of uninitialized memory.
+
+	If you are using kmemcheck to actively debug a problem, then you
+	probably want to choose "enabled" here.
+
+	The one-shot mode is mostly useful in automated test setups because it
+	can prevent floods of warnings and increase the chances of the machine
+	surviving in case something is really wrong. In other cases, the one-
+	shot mode could actually be counter-productive because it would turn
+	itself off at the very first error -- in the case of a false positive
+	too -- and this would come in the way of debugging the specific
+	problem you were interested in.
+
+	If you would like to use your kernel as normal, but with a chance to
+	enable kmemcheck in case of some problem, it might be a good idea to
+	choose "disabled" here. When kmemcheck is disabled, most of the run-
+	time overhead is not incurred, and the kernel will be almost as fast
+	as normal.
+
+- ``CONFIG_KMEMCHECK_QUEUE_SIZE``
+	Select the maximum number of error reports to store in an internal
+	(fixed-size) buffer. Since errors can occur virtually anywhere and in
+	any context, we need a temporary storage area which is guaranteed not
+	to generate any other page faults when accessed. The queue will be
+	emptied as soon as a tasklet may be scheduled. If the queue is full,
+	new error reports will be lost.
+
+	The default value of 64 is probably fine. If some code produces more
+	than 64 errors within an irqs-off section, then the code is likely to
+	produce many, many more, too, and these additional reports seldom give
+	any more information (the first report is usually the most valuable
+	anyway).
+
+	This number might have to be adjusted if you are not using serial
+	console or similar to capture the kernel log. If you are using the
+	"dmesg" command to save the log, then getting a lot of kmemcheck
+	warnings might overflow the kernel log itself, and the earlier reports
+	will get lost in that way instead. Try setting this to 10 or so on
+	such a setup.
+
+- ``CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT``
+	Select the number of shadow bytes to save along with each entry of the
+	error-report queue. These bytes indicate what parts of an allocation
+	are initialized, uninitialized, etc. and will be displayed when an
+	error is detected to help the debugging of a particular problem.
+
+	The number entered here is actually the logarithm of the number of
+	bytes that will be saved. So if you pick for example 5 here, kmemcheck
+	will save 2^5 = 32 bytes.
+
+	The default value should be fine for debugging most problems. It also
+	fits nicely within 80 columns.
+
+- ``CONFIG_KMEMCHECK_PARTIAL_OK``
+	This option (when enabled) works around certain GCC optimizations that
+	produce 32-bit reads from 16-bit variables where the upper 16 bits are
+	thrown away afterwards.
+
+	The default value (enabled) is recommended. This may of course hide
+	some real errors, but disabling it would probably produce a lot of
+	false positives.
+
+- ``CONFIG_KMEMCHECK_BITOPS_OK``
+	This option silences warnings that would be generated for bit-field
+	accesses where not all the bits are initialized at the same time. This
+	may also hide some real bugs.
+
+	This option is probably obsolete, or it should be replaced with
+	the kmemcheck-/bitfield-annotations for the code in question. The
+	default value is therefore fine.
+
+Now compile the kernel as usual.
+
+
+How to use
+----------
+
+Booting
+~~~~~~~
+
+First some information about the command-line options. There is only one
+option specific to kmemcheck, and this is called "kmemcheck". It can be used
+to override the default mode as chosen by the ``CONFIG_KMEMCHECK_*_BY_DEFAULT``
+option. Its possible settings are:
+
+- ``kmemcheck=0`` (disabled)
+- ``kmemcheck=1`` (enabled)
+- ``kmemcheck=2`` (one-shot mode)
+
+If SLUB debugging has been enabled in the kernel, it may take precedence over
+kmemcheck in such a way that the slab caches which are under SLUB debugging
+will not be tracked by kmemcheck. In order to ensure that this doesn't happen
+(even though it shouldn't by default), use SLUB's boot option ``slub_debug``,
+like this: ``slub_debug=-``
+
+In fact, this option may also be used for fine-grained control over SLUB vs.
+kmemcheck. For example, if the command line includes
+``kmemcheck=1 slub_debug=,dentry``, then SLUB debugging will be used only
+for the "dentry" slab cache, and with kmemcheck tracking all the other
+caches. This is advanced usage, however, and is not generally recommended.
+
+
+Run-time enable/disable
+~~~~~~~~~~~~~~~~~~~~~~~
+
+When the kernel has booted, it is possible to enable or disable kmemcheck at
+run-time. WARNING: This feature is still experimental and may cause false
+positive warnings to appear. Therefore, try not to use this. If you find that
+it doesn't work properly (e.g. you see an unreasonable amount of warnings), I
+will be happy to take bug reports.
+
+Use the file ``/proc/sys/kernel/kmemcheck`` for this purpose, e.g.::
+
+	$ echo 0 > /proc/sys/kernel/kmemcheck # disables kmemcheck
+
+The numbers are the same as for the ``kmemcheck=`` command-line option.
+
+
+Debugging
+~~~~~~~~~
+
+A typical report will look something like this::
+
+    WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
+    80000000000000000000000000000000000000000088ffff0000000000000000
+     i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
+             ^
+
+    Pid: 1856, comm: ntpdate Not tainted 2.6.29-rc5 #264 945P-A
+    RIP: 0010:[<ffffffff8104ede8>]  [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
+    RSP: 0018:ffff88003cdf7d98  EFLAGS: 00210002
+    RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
+    RDX: ffff88003e5d6018 RSI: ffff88003e5d6024 RDI: ffff88003cdf7e84
+    RBP: ffff88003cdf7db8 R08: ffff88003e5d6000 R09: 0000000000000000
+    R10: 0000000000000080 R11: 0000000000000000 R12: 000000000000000e
+    R13: ffff88003cdf7e78 R14: ffff88003d530710 R15: ffff88003d5a98c8
+    FS:  0000000000000000(0000) GS:ffff880001982000(0063) knlGS:00000
+    CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
+    CR2: ffff88003f806ea0 CR3: 000000003c036000 CR4: 00000000000006a0
+    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
+    DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
+     [<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
+     [<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
+     [<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
+     [<ffffffff8100c7b5>] int_signal+0x12/0x17
+     [<ffffffffffffffff>] 0xffffffffffffffff
+
+The single most valuable information in this report is the RIP (or EIP on 32-
+bit) value. This will help us pinpoint exactly which instruction that caused
+the warning.
+
+If your kernel was compiled with ``CONFIG_DEBUG_INFO=y``, then all we have to do
+is give this address to the addr2line program, like this::
+
+	$ addr2line -e vmlinux -i ffffffff8104ede8
+	arch/x86/include/asm/string_64.h:12
+	include/asm-generic/siginfo.h:287
+	kernel/signal.c:380
+	kernel/signal.c:410
+
+The "``-e vmlinux``" tells addr2line which file to look in. **IMPORTANT:**
+This must be the vmlinux of the kernel that produced the warning in the
+first place! If not, the line number information will almost certainly be
+wrong.
+
+The "``-i``" tells addr2line to also print the line numbers of inlined
+functions.  In this case, the flag was very important, because otherwise,
+it would only have printed the first line, which is just a call to
+``memcpy()``, which could be called from a thousand places in the kernel, and
+is therefore not very useful.  These inlined functions would not show up in
+the stack trace above, simply because the kernel doesn't load the extra
+debugging information. This technique can of course be used with ordinary
+kernel oopses as well.
+
+In this case, it's the caller of ``memcpy()`` that is interesting, and it can be
+found in ``include/asm-generic/siginfo.h``, line 287::
+
+    281 static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+    282 {
+    283         if (from->si_code < 0)
+    284                 memcpy(to, from, sizeof(*to));
+    285         else
+    286                 /* _sigchld is currently the largest know union member */
+    287                 memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
+    288 }
+
+Since this was a read (kmemcheck usually warns about reads only, though it can
+warn about writes to unallocated or freed memory as well), it was probably the
+"from" argument which contained some uninitialized bytes. Following the chain
+of calls, we move upwards to see where "from" was allocated or initialized,
+``kernel/signal.c``, line 380::
+
+    359 static void collect_signal(int sig, struct sigpending *list, siginfo_t *info)
+    360 {
+    ...
+    367         list_for_each_entry(q, &list->list, list) {
+    368                 if (q->info.si_signo == sig) {
+    369                         if (first)
+    370                                 goto still_pending;
+    371                         first = q;
+    ...
+    377         if (first) {
+    378 still_pending:
+    379                 list_del_init(&first->list);
+    380                 copy_siginfo(info, &first->info);
+    381                 __sigqueue_free(first);
+    ...
+    392         }
+    393 }
+
+Here, it is ``&first->info`` that is being passed on to ``copy_siginfo()``. The
+variable ``first`` was found on a list -- passed in as the second argument to
+``collect_signal()``. We  continue our journey through the stack, to figure out
+where the item on "list" was allocated or initialized. We move to line 410::
+
+    395 static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
+    396                         siginfo_t *info)
+    397 {
+    ...
+    410                 collect_signal(sig, pending, info);
+    ...
+    414 }
+
+Now we need to follow the ``pending`` pointer, since that is being passed on to
+``collect_signal()`` as ``list``. At this point, we've run out of lines from the
+"addr2line" output. Not to worry, we just paste the next addresses from the
+kmemcheck stack dump, i.e.::
+
+     [<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
+     [<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
+     [<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
+     [<ffffffff8100c7b5>] int_signal+0x12/0x17
+
+	$ addr2line -e vmlinux -i ffffffff8104f04e ffffffff81050bd8 \
+		ffffffff8100b87d ffffffff8100c7b5
+	kernel/signal.c:446
+	kernel/signal.c:1806
+	arch/x86/kernel/signal.c:805
+	arch/x86/kernel/signal.c:871
+	arch/x86/kernel/entry_64.S:694
+
+Remember that since these addresses were found on the stack and not as the
+RIP value, they actually point to the _next_ instruction (they are return
+addresses). This becomes obvious when we look at the code for line 446::
+
+    422 int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
+    423 {
+    ...
+    431                 signr = __dequeue_signal(&tsk->signal->shared_pending,
+    432						 mask, info);
+    433			/*
+    434			 * itimer signal ?
+    435			 *
+    436			 * itimers are process shared and we restart periodic
+    437			 * itimers in the signal delivery path to prevent DoS
+    438			 * attacks in the high resolution timer case. This is
+    439			 * compliant with the old way of self restarting
+    440			 * itimers, as the SIGALRM is a legacy signal and only
+    441			 * queued once. Changing the restart behaviour to
+    442			 * restart the timer in the signal dequeue path is
+    443			 * reducing the timer noise on heavy loaded !highres
+    444			 * systems too.
+    445			 */
+    446			if (unlikely(signr == SIGALRM)) {
+    ...
+    489 }
+
+So instead of looking at 446, we should be looking at 431, which is the line
+that executes just before 446. Here we see that what we are looking for is
+``&tsk->signal->shared_pending``.
+
+Our next task is now to figure out which function that puts items on this
+``shared_pending`` list. A crude, but efficient tool, is ``git grep``::
+
+	$ git grep -n 'shared_pending' kernel/
+	...
+	kernel/signal.c:828:	pending = group ? &t->signal->shared_pending : &t->pending;
+	kernel/signal.c:1339:	pending = group ? &t->signal->shared_pending : &t->pending;
+	...
+
+There were more results, but none of them were related to list operations,
+and these were the only assignments. We inspect the line numbers more closely
+and find that this is indeed where items are being added to the list::
+
+    816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
+    817				int group)
+    818 {
+    ...
+    828		pending = group ? &t->signal->shared_pending : &t->pending;
+    ...
+    851		q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
+    852						     (is_si_special(info) ||
+    853						      info->si_code >= 0)));
+    854		if (q) {
+    855			list_add_tail(&q->list, &pending->list);
+    ...
+    890 }
+
+and::
+
+    1309 int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group)
+    1310 {
+    ....
+    1339	 pending = group ? &t->signal->shared_pending : &t->pending;
+    1340	 list_add_tail(&q->list, &pending->list);
+    ....
+    1347 }
+
+In the first case, the list element we are looking for, ``q``, is being
+returned from the function ``__sigqueue_alloc()``, which looks like an
+allocation function.  Let's take a look at it::
+
+    187 static struct sigqueue *__sigqueue_alloc(struct task_struct *t, gfp_t flags,
+    188						 int override_rlimit)
+    189 {
+    190		struct sigqueue *q = NULL;
+    191		struct user_struct *user;
+    192
+    193		/*
+    194		 * We won't get problems with the target's UID changing under us
+    195		 * because changing it requires RCU be used, and if t != current, the
+    196		 * caller must be holding the RCU readlock (by way of a spinlock) and
+    197		 * we use RCU protection here
+    198		 */
+    199		user = get_uid(__task_cred(t)->user);
+    200		atomic_inc(&user->sigpending);
+    201		if (override_rlimit ||
+    202		    atomic_read(&user->sigpending) <=
+    203				t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur)
+    204			q = kmem_cache_alloc(sigqueue_cachep, flags);
+    205		if (unlikely(q == NULL)) {
+    206			atomic_dec(&user->sigpending);
+    207			free_uid(user);
+    208		} else {
+    209			INIT_LIST_HEAD(&q->list);
+    210			q->flags = 0;
+    211			q->user = user;
+    212		}
+    213
+    214		return q;
+    215 }
+
+We see that this function initializes ``q->list``, ``q->flags``, and
+``q->user``. It seems that now is the time to look at the definition of
+``struct sigqueue``, e.g.::
+
+    14 struct sigqueue {
+    15	       struct list_head list;
+    16	       int flags;
+    17	       siginfo_t info;
+    18	       struct user_struct *user;
+    19 };
+
+And, you might remember, it was a ``memcpy()`` on ``&first->info`` that
+caused the warning, so this makes perfect sense. It also seems reasonable
+to assume that it is the caller of ``__sigqueue_alloc()`` that has the
+responsibility of filling out (initializing) this member.
+
+But just which fields of the struct were uninitialized? Let's look at
+kmemcheck's report again::
+
+    WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
+    80000000000000000000000000000000000000000088ffff0000000000000000
+     i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
+	     ^
+
+These first two lines are the memory dump of the memory object itself, and
+the shadow bytemap, respectively. The memory object itself is in this case
+``&first->info``. Just beware that the start of this dump is NOT the start
+of the object itself! The position of the caret (^) corresponds with the
+address of the read (ffff88003e4a2024).
+
+The shadow bytemap dump legend is as follows:
+
+- i: initialized
+- u: uninitialized
+- a: unallocated (memory has been allocated by the slab layer, but has not
+  yet been handed off to anybody)
+- f: freed (memory has been allocated by the slab layer, but has been freed
+  by the previous owner)
+
+In order to figure out where (relative to the start of the object) the
+uninitialized memory was located, we have to look at the disassembly. For
+that, we'll need the RIP address again::
+
+    RIP: 0010:[<ffffffff8104ede8>]  [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
+
+	$ objdump -d --no-show-raw-insn vmlinux | grep -C 8 ffffffff8104ede8:
+	ffffffff8104edc8:	mov    %r8,0x8(%r8)
+	ffffffff8104edcc:	test   %r10d,%r10d
+	ffffffff8104edcf:	js     ffffffff8104ee88 <__dequeue_signal+0x168>
+	ffffffff8104edd5:	mov    %rax,%rdx
+	ffffffff8104edd8:	mov    $0xc,%ecx
+	ffffffff8104eddd:	mov    %r13,%rdi
+	ffffffff8104ede0:	mov    $0x30,%eax
+	ffffffff8104ede5:	mov    %rdx,%rsi
+	ffffffff8104ede8:	rep movsl %ds:(%rsi),%es:(%rdi)
+	ffffffff8104edea:	test   $0x2,%al
+	ffffffff8104edec:	je     ffffffff8104edf0 <__dequeue_signal+0xd0>
+	ffffffff8104edee:	movsw  %ds:(%rsi),%es:(%rdi)
+	ffffffff8104edf0:	test   $0x1,%al
+	ffffffff8104edf2:	je     ffffffff8104edf5 <__dequeue_signal+0xd5>
+	ffffffff8104edf4:	movsb  %ds:(%rsi),%es:(%rdi)
+	ffffffff8104edf5:	mov    %r8,%rdi
+	ffffffff8104edf8:	callq  ffffffff8104de60 <__sigqueue_free>
+
+As expected, it's the "``rep movsl``" instruction from the ``memcpy()``
+that causes the warning. We know about ``REP MOVSL`` that it uses the register
+``RCX`` to count the number of remaining iterations. By taking a look at the
+register dump again (from the kmemcheck report), we can figure out how many
+bytes were left to copy::
+
+    RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
+
+By looking at the disassembly, we also see that ``%ecx`` is being loaded
+with the value ``$0xc`` just before (ffffffff8104edd8), so we are very
+lucky. Keep in mind that this is the number of iterations, not bytes. And
+since this is a "long" operation, we need to multiply by 4 to get the
+number of bytes. So this means that the uninitialized value was encountered
+at 4 * (0xc - 0x9) = 12 bytes from the start of the object.
+
+We can now try to figure out which field of the "``struct siginfo``" that
+was not initialized. This is the beginning of the struct::
+
+    40 typedef struct siginfo {
+    41	       int si_signo;
+    42	       int si_errno;
+    43	       int si_code;
+    44
+    45	       union {
+    ..
+    92	       } _sifields;
+    93 } siginfo_t;
+
+On 64-bit, the int is 4 bytes long, so it must the union member that has
+not been initialized. We can verify this using gdb::
+
+	$ gdb vmlinux
+	...
+	(gdb) p &((struct siginfo *) 0)->_sifields
+	$1 = (union {...} *) 0x10
+
+Actually, it seems that the union member is located at offset 0x10 -- which
+means that gcc has inserted 4 bytes of padding between the members ``si_code``
+and ``_sifields``. We can now get a fuller picture of the memory dump::
+
+		 _----------------------------=> si_code
+		/	 _--------------------=> (padding)
+	       |	/	 _------------=> _sifields(._kill._pid)
+	       |       |	/	 _----=> _sifields(._kill._uid)
+	       |       |       |	/
+	-------|-------|-------|-------|
+	80000000000000000000000000000000000000000088ffff0000000000000000
+	 i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
+
+This allows us to realize another important fact: ``si_code`` contains the
+value 0x80. Remember that x86 is little endian, so the first 4 bytes
+"80000000" are really the number 0x00000080. With a bit of research, we
+find that this is actually the constant ``SI_KERNEL`` defined in
+``include/asm-generic/siginfo.h``::
+
+    144 #define SI_KERNEL	0x80		/* sent by the kernel from somewhere	 */
+
+This macro is used in exactly one place in the x86 kernel: In ``send_signal()``
+in ``kernel/signal.c``::
+
+    816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
+    817				int group)
+    818 {
+    ...
+    828		pending = group ? &t->signal->shared_pending : &t->pending;
+    ...
+    851		q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
+    852						     (is_si_special(info) ||
+    853						      info->si_code >= 0)));
+    854		if (q) {
+    855			list_add_tail(&q->list, &pending->list);
+    856			switch ((unsigned long) info) {
+    ...
+    865			case (unsigned long) SEND_SIG_PRIV:
+    866				q->info.si_signo = sig;
+    867				q->info.si_errno = 0;
+    868				q->info.si_code = SI_KERNEL;
+    869				q->info.si_pid = 0;
+    870				q->info.si_uid = 0;
+    871				break;
+    ...
+    890 }
+
+Not only does this match with the ``.si_code`` member, it also matches the place
+we found earlier when looking for where siginfo_t objects are enqueued on the
+``shared_pending`` list.
+
+So to sum up: It seems that it is the padding introduced by the compiler
+between two struct fields that is uninitialized, and this gets reported when
+we do a ``memcpy()`` on the struct. This means that we have identified a false
+positive warning.
+
+Normally, kmemcheck will not report uninitialized accesses in ``memcpy()`` calls
+when both the source and destination addresses are tracked. (Instead, we copy
+the shadow bytemap as well). In this case, the destination address clearly
+was not tracked. We can dig a little deeper into the stack trace from above::
+
+	arch/x86/kernel/signal.c:805
+	arch/x86/kernel/signal.c:871
+	arch/x86/kernel/entry_64.S:694
+
+And we clearly see that the destination siginfo object is located on the
+stack::
+
+    782 static void do_signal(struct pt_regs *regs)
+    783 {
+    784		struct k_sigaction ka;
+    785		siginfo_t info;
+    ...
+    804		signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+    ...
+    854 }
+
+And this ``&info`` is what eventually gets passed to ``copy_siginfo()`` as the
+destination argument.
+
+Now, even though we didn't find an actual error here, the example is still a
+good one, because it shows how one would go about to find out what the report
+was all about.
+
+
+Annotating false positives
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+There are a few different ways to make annotations in the source code that
+will keep kmemcheck from checking and reporting certain allocations. Here
+they are:
+
+- ``__GFP_NOTRACK_FALSE_POSITIVE``
+	This flag can be passed to ``kmalloc()`` or ``kmem_cache_alloc()``
+	(therefore also to other functions that end up calling one of
+	these) to indicate that the allocation should not be tracked
+	because it would lead to a false positive report. This is a "big
+	hammer" way of silencing kmemcheck; after all, even if the false
+	positive pertains to particular field in a struct, for example, we
+	will now lose the ability to find (real) errors in other parts of
+	the same struct.
+
+	Example::
+
+	    /* No warnings will ever trigger on accessing any part of x */
+	    x = kmalloc(sizeof *x, GFP_KERNEL | __GFP_NOTRACK_FALSE_POSITIVE);
+
+- ``kmemcheck_bitfield_begin(name)``/``kmemcheck_bitfield_end(name)`` and
+	``kmemcheck_annotate_bitfield(ptr, name)``
+	The first two of these three macros can be used inside struct
+	definitions to signal, respectively, the beginning and end of a
+	bitfield. Additionally, this will assign the bitfield a name, which
+	is given as an argument to the macros.
+
+	Having used these markers, one can later use
+	kmemcheck_annotate_bitfield() at the point of allocation, to indicate
+	which parts of the allocation is part of a bitfield.
+
+	Example::
+
+	    struct foo {
+		int x;
+
+		kmemcheck_bitfield_begin(flags);
+		int flag_a:1;
+		int flag_b:1;
+		kmemcheck_bitfield_end(flags);
+
+		int y;
+	    };
+
+	    struct foo *x = kmalloc(sizeof *x);
+
+	    /* No warnings will trigger on accessing the bitfield of x */
+	    kmemcheck_annotate_bitfield(x, flags);
+
+	Note that ``kmemcheck_annotate_bitfield()`` can be used even before the
+	return value of ``kmalloc()`` is checked -- in other words, passing NULL
+	as the first argument is legal (and will do nothing).
+
+
+Reporting errors
+----------------
+
+As we have seen, kmemcheck will produce false positive reports. Therefore, it
+is not very wise to blindly post kmemcheck warnings to mailing lists and
+maintainers. Instead, I encourage maintainers and developers to find errors
+in their own code. If you get a warning, you can try to work around it, try
+to figure out if it's a real error or not, or simply ignore it. Most
+developers know their own code and will quickly and efficiently determine the
+root cause of a kmemcheck report. This is therefore also the most efficient
+way to work with kmemcheck.
+
+That said, we (the kmemcheck maintainers) will always be on the lookout for
+false positives that we can annotate and silence. So whatever you find,
+please drop us a note privately! Kernel configs and steps to reproduce (if
+available) are of course a great help too.
+
+Happy hacking!
+
+
+Technical description
+---------------------
+
+kmemcheck works by marking memory pages non-present. This means that whenever
+somebody attempts to access the page, a page fault is generated. The page
+fault handler notices that the page was in fact only hidden, and so it calls
+on the kmemcheck code to make further investigations.
+
+When the investigations are completed, kmemcheck "shows" the page by marking
+it present (as it would be under normal circumstances). This way, the
+interrupted code can continue as usual.
+
+But after the instruction has been executed, we should hide the page again, so
+that we can catch the next access too! Now kmemcheck makes use of a debugging
+feature of the processor, namely single-stepping. When the processor has
+finished the one instruction that generated the memory access, a debug
+exception is raised. From here, we simply hide the page again and continue
+execution, this time with the single-stepping feature turned off.
+
+kmemcheck requires some assistance from the memory allocator in order to work.
+The memory allocator needs to
+
+  1. Tell kmemcheck about newly allocated pages and pages that are about to
+     be freed. This allows kmemcheck to set up and tear down the shadow memory
+     for the pages in question. The shadow memory stores the status of each
+     byte in the allocation proper, e.g. whether it is initialized or
+     uninitialized.
+
+  2. Tell kmemcheck which parts of memory should be marked uninitialized.
+     There are actually a few more states, such as "not yet allocated" and
+     "recently freed".
+
+If a slab cache is set up using the SLAB_NOTRACK flag, it will never return
+memory that can take page faults because of kmemcheck.
+
+If a slab cache is NOT set up using the SLAB_NOTRACK flag, callers can still
+request memory with the __GFP_NOTRACK or __GFP_NOTRACK_FALSE_POSITIVE flags.
+This does not prevent the page faults from occurring, however, but marks the
+object in question as being initialized so that no warnings will ever be
+produced for this object.
+
+Currently, the SLAB and SLUB allocators are supported by kmemcheck.
diff --git a/Documentation/kmemleak.txt b/Documentation/dev-tools/kmemleak.rst
similarity index 73%
rename from Documentation/kmemleak.txt
rename to Documentation/dev-tools/kmemleak.rst
index 18e24ab..1788722 100644
--- a/Documentation/kmemleak.txt
+++ b/Documentation/dev-tools/kmemleak.rst
@@ -1,15 +1,12 @@
 Kernel Memory Leak Detector
 ===========================
 
-Introduction
-------------
-
 Kmemleak provides a way of detecting possible kernel memory leaks in a
 way similar to a tracing garbage collector
 (https://en.wikipedia.org/wiki/Garbage_collection_%28computer_science%29#Tracing_garbage_collectors),
 with the difference that the orphan objects are not freed but only
 reported via /sys/kernel/debug/kmemleak. A similar method is used by the
-Valgrind tool (memcheck --leak-check) to detect the memory leaks in
+Valgrind tool (``memcheck --leak-check``) to detect the memory leaks in
 user-space applications.
 Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze, ppc, mips, s390, metag and tile.
 
@@ -19,20 +16,20 @@
 CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
 thread scans the memory every 10 minutes (by default) and prints the
 number of new unreferenced objects found. To display the details of all
-the possible memory leaks:
+the possible memory leaks::
 
   # mount -t debugfs nodev /sys/kernel/debug/
   # cat /sys/kernel/debug/kmemleak
 
-To trigger an intermediate memory scan:
+To trigger an intermediate memory scan::
 
   # echo scan > /sys/kernel/debug/kmemleak
 
-To clear the list of all current possible memory leaks:
+To clear the list of all current possible memory leaks::
 
   # echo clear > /sys/kernel/debug/kmemleak
 
-New leaks will then come up upon reading /sys/kernel/debug/kmemleak
+New leaks will then come up upon reading ``/sys/kernel/debug/kmemleak``
 again.
 
 Note that the orphan objects are listed in the order they were allocated
@@ -40,22 +37,31 @@
 objects to be reported as orphan.
 
 Memory scanning parameters can be modified at run-time by writing to the
-/sys/kernel/debug/kmemleak file. The following parameters are supported:
+``/sys/kernel/debug/kmemleak`` file. The following parameters are supported:
 
-  off		- disable kmemleak (irreversible)
-  stack=on	- enable the task stacks scanning (default)
-  stack=off	- disable the tasks stacks scanning
-  scan=on	- start the automatic memory scanning thread (default)
-  scan=off	- stop the automatic memory scanning thread
-  scan=<secs>	- set the automatic memory scanning period in seconds
-		  (default 600, 0 to stop the automatic scanning)
-  scan		- trigger a memory scan
-  clear		- clear list of current memory leak suspects, done by
-		  marking all current reported unreferenced objects grey,
-		  or free all kmemleak objects if kmemleak has been disabled.
-  dump=<addr>	- dump information about the object found at <addr>
+- off
+    disable kmemleak (irreversible)
+- stack=on
+    enable the task stacks scanning (default)
+- stack=off
+    disable the tasks stacks scanning
+- scan=on
+    start the automatic memory scanning thread (default)
+- scan=off
+    stop the automatic memory scanning thread
+- scan=<secs>
+    set the automatic memory scanning period in seconds
+    (default 600, 0 to stop the automatic scanning)
+- scan
+    trigger a memory scan
+- clear
+    clear list of current memory leak suspects, done by
+    marking all current reported unreferenced objects grey,
+    or free all kmemleak objects if kmemleak has been disabled.
+- dump=<addr>
+    dump information about the object found at <addr>
 
-Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
+Kmemleak can also be disabled at boot-time by passing ``kmemleak=off`` on
 the kernel command line.
 
 Memory may be allocated or freed before kmemleak is initialised and
@@ -63,13 +69,14 @@
 is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
 
 If CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF are enabled, the kmemleak is
-disabled by default. Passing "kmemleak=on" on the kernel command
+disabled by default. Passing ``kmemleak=on`` on the kernel command
 line enables the function. 
 
 Basic Algorithm
 ---------------
 
-The memory allocations via kmalloc, vmalloc, kmem_cache_alloc and
+The memory allocations via :c:func:`kmalloc`, :c:func:`vmalloc`,
+:c:func:`kmem_cache_alloc` and
 friends are traced and the pointers, together with additional
 information like size and stack trace, are stored in a rbtree.
 The corresponding freeing function calls are tracked and the pointers
@@ -113,13 +120,13 @@
 you can find new unreferenced objects; this should help with testing
 specific sections of code.
 
-To test a critical section on demand with a clean kmemleak do:
+To test a critical section on demand with a clean kmemleak do::
 
   # echo clear > /sys/kernel/debug/kmemleak
   ... test your kernel or modules ...
   # echo scan > /sys/kernel/debug/kmemleak
 
-Then as usual to get your report with:
+Then as usual to get your report with::
 
   # cat /sys/kernel/debug/kmemleak
 
@@ -131,7 +138,7 @@
 won't be freed when kmemleak is disabled, and those objects may occupy
 a large part of physical memory.
 
-In this situation, you may reclaim memory with:
+In this situation, you may reclaim memory with::
 
   # echo clear > /sys/kernel/debug/kmemleak
 
@@ -140,20 +147,20 @@
 
 See the include/linux/kmemleak.h header for the functions prototype.
 
-kmemleak_init		 - initialize kmemleak
-kmemleak_alloc		 - notify of a memory block allocation
-kmemleak_alloc_percpu	 - notify of a percpu memory block allocation
-kmemleak_free		 - notify of a memory block freeing
-kmemleak_free_part	 - notify of a partial memory block freeing
-kmemleak_free_percpu	 - notify of a percpu memory block freeing
-kmemleak_update_trace	 - update object allocation stack trace
-kmemleak_not_leak	 - mark an object as not a leak
-kmemleak_ignore		 - do not scan or report an object as leak
-kmemleak_scan_area	 - add scan areas inside a memory block
-kmemleak_no_scan	 - do not scan a memory block
-kmemleak_erase		 - erase an old value in a pointer variable
-kmemleak_alloc_recursive - as kmemleak_alloc but checks the recursiveness
-kmemleak_free_recursive	 - as kmemleak_free but checks the recursiveness
+- ``kmemleak_init``		 - initialize kmemleak
+- ``kmemleak_alloc``		 - notify of a memory block allocation
+- ``kmemleak_alloc_percpu``	 - notify of a percpu memory block allocation
+- ``kmemleak_free``		 - notify of a memory block freeing
+- ``kmemleak_free_part``	 - notify of a partial memory block freeing
+- ``kmemleak_free_percpu``	 - notify of a percpu memory block freeing
+- ``kmemleak_update_trace``	 - update object allocation stack trace
+- ``kmemleak_not_leak``	 - mark an object as not a leak
+- ``kmemleak_ignore``		 - do not scan or report an object as leak
+- ``kmemleak_scan_area``	 - add scan areas inside a memory block
+- ``kmemleak_no_scan``	 - do not scan a memory block
+- ``kmemleak_erase``		 - erase an old value in a pointer variable
+- ``kmemleak_alloc_recursive`` - as kmemleak_alloc but checks the recursiveness
+- ``kmemleak_free_recursive``	 - as kmemleak_free but checks the recursiveness
 
 Dealing with false positives/negatives
 --------------------------------------
diff --git a/Documentation/sparse.txt b/Documentation/dev-tools/sparse.rst
similarity index 81%
rename from Documentation/sparse.txt
rename to Documentation/dev-tools/sparse.rst
index eceab13..8c250e8 100644
--- a/Documentation/sparse.txt
+++ b/Documentation/dev-tools/sparse.rst
@@ -1,11 +1,20 @@
-Copyright 2004 Linus Torvalds
-Copyright 2004 Pavel Machek <pavel@ucw.cz>
-Copyright 2006 Bob Copeland <me@bobcopeland.com>
+.. Copyright 2004 Linus Torvalds
+.. Copyright 2004 Pavel Machek <pavel@ucw.cz>
+.. Copyright 2006 Bob Copeland <me@bobcopeland.com>
+
+Sparse
+======
+
+Sparse is a semantic checker for C programs; it can be used to find a
+number of potential problems with kernel code.  See
+https://lwn.net/Articles/689907/ for an overview of sparse; this document
+contains some kernel-specific sparse information.
+
 
 Using sparse for typechecking
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-----------------------------
 
-"__bitwise" is a type attribute, so you have to do something like this:
+"__bitwise" is a type attribute, so you have to do something like this::
 
         typedef int __bitwise pm_request_t;
 
@@ -20,13 +29,13 @@
 the enum values are all the same type, now "enum pm_request" will be that
 type too.
 
-And with gcc, all the __bitwise/__force stuff goes away, and it all ends
-up looking just like integers to gcc.
+And with gcc, all the "__bitwise"/"__force stuff" goes away, and it all
+ends up looking just like integers to gcc.
 
 Quite frankly, you don't need the enum there. The above all really just
 boils down to one special "int __bitwise" type.
 
-So the simpler way is to just do
+So the simpler way is to just do::
 
         typedef int __bitwise pm_request_t;
 
@@ -50,7 +59,7 @@
 don't want to drown in noise unless we'd explicitly asked for it.
 
 Using sparse for lock checking
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+------------------------------
 
 The following macros are undefined for gcc and defined during a sparse
 run to use the "context" tracking feature of sparse, applied to
@@ -69,22 +78,22 @@
 sparse would otherwise report a context imbalance.
 
 Getting sparse
-~~~~~~~~~~~~~~
+--------------
 
 You can get latest released versions from the Sparse homepage at
 https://sparse.wiki.kernel.org/index.php/Main_Page
 
 Alternatively, you can get snapshots of the latest development version
-of sparse using git to clone..
+of sparse using git to clone::
 
         git://git.kernel.org/pub/scm/devel/sparse/sparse.git
 
-DaveJ has hourly generated tarballs of the git tree available at..
+DaveJ has hourly generated tarballs of the git tree available at::
 
         http://www.codemonkey.org.uk/projects/git-snapshots/sparse/
 
 
-Once you have it, just do
+Once you have it, just do::
 
         make
         make install
@@ -92,7 +101,7 @@
 as a regular user, and it will install sparse in your ~/bin directory.
 
 Using sparse
-~~~~~~~~~~~~
+------------
 
 Do a kernel make with "make C=1" to run sparse on all the C files that get
 recompiled, or use "make C=2" to run sparse on the files whether they need to
@@ -101,7 +110,7 @@
 
 The optional make variable CF can be used to pass arguments to sparse.  The
 build system passes -Wbitwise to sparse automatically.  To perform endianness
-checks, you may define __CHECK_ENDIAN__:
+checks, you may define __CHECK_ENDIAN__::
 
         make C=2 CF="-D__CHECK_ENDIAN__"
 
diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
new file mode 100644
index 0000000..824ae8e
--- /dev/null
+++ b/Documentation/dev-tools/tools.rst
@@ -0,0 +1,25 @@
+================================
+Development tools for the kernel
+================================
+
+This document is a collection of documents about development tools that can
+be used to work on the kernel.  For now, the documents have been pulled
+together without any significant effot to integrate them into a coherent
+whole; patches welcome!
+
+.. class:: toc-title
+
+	   Table of contents
+
+.. toctree::
+   :maxdepth: 2
+
+   coccinelle
+   sparse
+   kcov
+   gcov
+   kasan
+   ubsan
+   kmemleak
+   kmemcheck
+   gdb-kernel-debugging
diff --git a/Documentation/ubsan.txt b/Documentation/dev-tools/ubsan.rst
similarity index 77%
rename from Documentation/ubsan.txt
rename to Documentation/dev-tools/ubsan.rst
index f58215e..655e6b6 100644
--- a/Documentation/ubsan.txt
+++ b/Documentation/dev-tools/ubsan.rst
@@ -1,7 +1,5 @@
-Undefined Behavior Sanitizer - UBSAN
-
-Overview
---------
+The Undefined Behavior Sanitizer - UBSAN
+========================================
 
 UBSAN is a runtime undefined behaviour checker.
 
@@ -10,11 +8,13 @@
 that may cause UB. If check fails (i.e. UB detected) __ubsan_handle_*
 function called to print error message.
 
-GCC has that feature since 4.9.x [1] (see -fsanitize=undefined option and
-its suboptions). GCC 5.x has more checkers implemented [2].
+GCC has that feature since 4.9.x [1_] (see ``-fsanitize=undefined`` option and
+its suboptions). GCC 5.x has more checkers implemented [2_].
 
 Report example
----------------
+--------------
+
+::
 
 	 ================================================================================
 	 UBSAN: Undefined behaviour in ../include/linux/bitops.h:110:33
@@ -47,29 +47,33 @@
 Usage
 -----
 
-To enable UBSAN configure kernel with:
+To enable UBSAN configure kernel with::
 
 	CONFIG_UBSAN=y
 
-and to check the entire kernel:
+and to check the entire kernel::
 
         CONFIG_UBSAN_SANITIZE_ALL=y
 
 To enable instrumentation for specific files or directories, add a line
 similar to the following to the respective kernel Makefile:
 
-        For a single file (e.g. main.o):
-                UBSAN_SANITIZE_main.o := y
+- For a single file (e.g. main.o)::
 
-        For all files in one directory:
-                UBSAN_SANITIZE := y
+    UBSAN_SANITIZE_main.o := y
+
+- For all files in one directory::
+
+    UBSAN_SANITIZE := y
 
 To exclude files from being instrumented even if
-CONFIG_UBSAN_SANITIZE_ALL=y, use:
+``CONFIG_UBSAN_SANITIZE_ALL=y``, use::
 
-                UBSAN_SANITIZE_main.o := n
-        and:
-                UBSAN_SANITIZE := n
+  UBSAN_SANITIZE_main.o := n
+
+and::
+
+  UBSAN_SANITIZE := n
 
 Detection of unaligned accesses controlled through the separate option -
 CONFIG_UBSAN_ALIGNMENT. It's off by default on architectures that support
@@ -80,5 +84,5 @@
 References
 ----------
 
-[1] - https://gcc.gnu.org/onlinedocs/gcc-4.9.0/gcc/Debugging-Options.html
-[2] - https://gcc.gnu.org/onlinedocs/gcc/Debugging-Options.html
+.. _1: https://gcc.gnu.org/onlinedocs/gcc-4.9.0/gcc/Debugging-Options.html
+.. _2: https://gcc.gnu.org/onlinedocs/gcc/Debugging-Options.html
diff --git a/Documentation/development-process/1.Intro b/Documentation/development-process/1.Intro.rst
similarity index 86%
rename from Documentation/development-process/1.Intro
rename to Documentation/development-process/1.Intro.rst
index 9b61448..22642b3 100644
--- a/Documentation/development-process/1.Intro
+++ b/Documentation/development-process/1.Intro.rst
@@ -1,16 +1,8 @@
-1: A GUIDE TO THE KERNEL DEVELOPMENT PROCESS
+Introdution
+===========
 
-The purpose of this document is to help developers (and their managers)
-work with the development community with a minimum of frustration.  It is
-an attempt to document how this community works in a way which is
-accessible to those who are not intimately familiar with Linux kernel
-development (or, indeed, free software development in general).  While
-there is some technical material here, this is very much a process-oriented
-discussion which does not require a deep knowledge of kernel programming to
-understand.
-
-
-1.1: EXECUTIVE SUMMARY
+Executive summary
+-----------------
 
 The rest of this section covers the scope of the kernel development process
 and the kinds of frustrations that developers and their employers can
@@ -20,41 +12,41 @@
 influence the direction of kernel development.  Code contributed to the
 Linux kernel must be made available under a GPL-compatible license.
 
-Section 2 introduces the development process, the kernel release cycle, and
-the mechanics of the merge window.  The various phases in the patch
-development, review, and merging cycle are covered.  There is some
+:ref:`development_process` introduces the development process, the kernel
+release cycle, and the mechanics of the merge window.  The various phases in
+the patch development, review, and merging cycle are covered.  There is some
 discussion of tools and mailing lists.  Developers wanting to get started
 with kernel development are encouraged to track down and fix bugs as an
 initial exercise.
 
-Section 3 covers early-stage project planning, with an emphasis on
-involving the development community as soon as possible.
+:ref:`development_early_stage` covers early-stage project planning, with an
+emphasis on involving the development community as soon as possible.
 
-Section 4 is about the coding process; several pitfalls which have been
-encountered by other developers are discussed.  Some requirements for
+:ref:`development_coding` is about the coding process; several pitfalls which
+have been encountered by other developers are discussed.  Some requirements for
 patches are covered, and there is an introduction to some of the tools
 which can help to ensure that kernel patches are correct.
 
-Section 5 talks about the process of posting patches for review.  To be
-taken seriously by the development community, patches must be properly
-formatted and described, and they must be sent to the right place.
+:ref:`development_posting` talks about the process of posting patches for
+review. To be taken seriously by the development community, patches must be
+properly formatted and described, and they must be sent to the right place.
 Following the advice in this section should help to ensure the best
 possible reception for your work.
 
-Section 6 covers what happens after posting patches; the job is far from
-done at that point.  Working with reviewers is a crucial part of the
-development process; this section offers a number of tips on how to avoid
-problems at this important stage.  Developers are cautioned against
+:ref:`development_followthrough` covers what happens after posting patches; the
+job is far from done at that point.  Working with reviewers is a crucial part
+of the development process; this section offers a number of tips on how to
+avoid problems at this important stage.  Developers are cautioned against
 assuming that the job is done when a patch is merged into the mainline.
 
-Section 7 introduces a couple of "advanced" topics: managing patches with
-git and reviewing patches posted by others.
+:ref:`development_advancedtopics` introduces a couple of "advanced" topics:
+managing patches with git and reviewing patches posted by others.
 
-Section 8 concludes the document with pointers to sources for more
-information on kernel development.
+:ref:`development_conclusion` concludes the document with pointers to sources
+for more information on kernel development.
 
-
-1.2: WHAT THIS DOCUMENT IS ABOUT
+What this document is about
+---------------------------
 
 The Linux kernel, at over 8 million lines of code and well over 1000
 contributors to each release, is one of the largest and most active free
@@ -108,8 +100,8 @@
 better; the following text should help you - or those who work for you -
 join our community.
 
-
-1.3: CREDITS
+Credits
+-------
 
 This document was written by Jonathan Corbet, corbet@lwn.net.  It has been
 improved by comments from Johannes Berg, James Berry, Alex Chiang, Roland
@@ -120,8 +112,8 @@
 This work was supported by the Linux Foundation; thanks especially to
 Amanda McPherson, who saw the value of this effort and made it all happen.
 
-
-1.4: THE IMPORTANCE OF GETTING CODE INTO THE MAINLINE
+The importance of getting code into the mainline
+------------------------------------------------
 
 Some companies and developers occasionally wonder why they should bother
 learning how to work with the kernel community and get their code into the
@@ -233,8 +225,8 @@
 point, vendors whose code is in the mainline and well maintained will be
 much better positioned to get the new product ready for market quickly.
 
-
-1.5: LICENSING
+Licensing
+---------
 
 Code is contributed to the Linux kernel under a number of licenses, but all
 code must be compatible with version 2 of the GNU General Public License
diff --git a/Documentation/development-process/2.Process b/Documentation/development-process/2.Process.rst
similarity index 96%
rename from Documentation/development-process/2.Process
rename to Documentation/development-process/2.Process.rst
index c24e156..ce5561b 100644
--- a/Documentation/development-process/2.Process
+++ b/Documentation/development-process/2.Process.rst
@@ -1,4 +1,7 @@
-2: HOW THE DEVELOPMENT PROCESS WORKS
+.. _development_process:
+
+How the development process works
+=================================
 
 Linux kernel development in the early 1990's was a pretty loose affair,
 with relatively small numbers of users and developers involved.  With a
@@ -7,19 +10,21 @@
 processes to keep development happening smoothly.  A solid understanding of
 how the process works is required in order to be an effective part of it.
 
-
-2.1: THE BIG PICTURE
+The big picture
+---------------
 
 The kernel developers use a loosely time-based release process, with a new
 major kernel release happening every two or three months.  The recent
 release history looks like this:
 
+	======  =================
 	2.6.38	March 14, 2011
 	2.6.37	January 4, 2011
 	2.6.36	October 20, 2010
 	2.6.35	August 1, 2010
 	2.6.34	May 15, 2010
 	2.6.33	February 24, 2010
+	======  =================
 
 Every 2.6.x release is a major kernel release with new features, internal
 API changes, and more.  A typical 2.6 release can contain nearly 10,000
@@ -68,6 +73,7 @@
 As an example, here is how the 2.6.38 development cycle went (all dates in
 2011):
 
+	==============  ===============================
 	January 4	2.6.37 stable release
 	January 18	2.6.38-rc1, merge window closes
 	January 21	2.6.38-rc2
@@ -78,6 +84,7 @@
 	March 1		2.6.38-rc7
 	March 7		2.6.38-rc8
 	March 14	2.6.38 stable release
+	==============  ===============================
 
 How do the developers decide when to close the development cycle and create
 the stable release?  The most significant metric used is the list of
@@ -105,11 +112,13 @@
 a little more than one development cycle past their initial release.  So,
 for example, the 2.6.36 kernel's history looked like:
 
+	==============  ===============================
 	October 10	2.6.36 stable release
 	November 22	2.6.36.1
 	December 9	2.6.36.2
 	January 7	2.6.36.3
 	February 17	2.6.36.4
+	==============  ===============================
 
 2.6.36.4 was the final stable update for the 2.6.36 release.
 
@@ -117,9 +126,11 @@
 for a longer period.  As of this writing, the current long term kernels
 and their maintainers are:
 
+	======  ======================  ===========================
 	2.6.27	Willy Tarreau		(Deep-frozen stable kernel)
 	2.6.32	Greg Kroah-Hartman
 	2.6.35	Andi Kleen		(Embedded flag kernel)
+	======  ======================  ===========================
 
 The selection of a kernel for long-term support is purely a matter of a
 maintainer having the need and the time to maintain that release.  There
@@ -127,7 +138,8 @@
 release.
 
 
-2.2: THE LIFECYCLE OF A PATCH
+The lifecycle of a patch
+------------------------
 
 Patches do not go directly from the developer's keyboard into the mainline
 kernel.  There is, instead, a somewhat involved (if somewhat informal)
@@ -195,8 +207,8 @@
 step.  This approach invariably leads to frustration for everybody
 involved.
 
-
-2.3: HOW PATCHES GET INTO THE KERNEL
+How patches get into the Kernel
+-------------------------------
 
 There is exactly one person who can merge patches into the mainline kernel
 repository: Linus Torvalds.  But, of the over 9,500 patches which went
@@ -242,7 +254,8 @@
 normally the right way to go.
 
 
-2.4: NEXT TREES
+Next trees
+----------
 
 The chain of subsystem trees guides the flow of patches into the kernel,
 but it also raises an interesting question: what if somebody wants to look
@@ -294,7 +307,8 @@
 their way into linux-next some time before the merge window opens.
 
 
-2.4.1: STAGING TREES
+Staging trees
+-------------
 
 The kernel source tree contains the drivers/staging/ directory, where
 many sub-directories for drivers or filesystems that are on their way to
@@ -322,7 +336,8 @@
 a proper mainline driver.
 
 
-2.5: TOOLS
+Tools
+-----
 
 As can be seen from the above text, the kernel development process depends
 heavily on the ability to herd collections of patches in various
@@ -368,7 +383,8 @@
 quilt is the best tool for the job.
 
 
-2.6: MAILING LISTS
+Mailing lists
+-------------
 
 A great deal of Linux kernel development work is done by way of mailing
 lists.  It is hard to be a fully-functioning member of the community
@@ -436,7 +452,8 @@
 in the MAINTAINERS file packaged with the kernel source.
 
 
-2.7: GETTING STARTED WITH KERNEL DEVELOPMENT
+Getting started with Kernel development
+---------------------------------------
 
 Questions about how to get started with the kernel development process are
 common - from both individuals and companies.  Equally common are missteps
@@ -463,6 +480,8 @@
 
 Andrew Morton gives this advice for aspiring kernel developers
 
+::
+
 	The #1 project for all kernel beginners should surely be "make sure
 	that the kernel runs perfectly at all times on all machines which
 	you can lay your hands on".  Usually the way to do this is to work
diff --git a/Documentation/development-process/3.Early-stage b/Documentation/development-process/3.Early-stage.rst
similarity index 97%
rename from Documentation/development-process/3.Early-stage
rename to Documentation/development-process/3.Early-stage.rst
index f87ba7b..af2c0af 100644
--- a/Documentation/development-process/3.Early-stage
+++ b/Documentation/development-process/3.Early-stage.rst
@@ -1,4 +1,7 @@
-3: EARLY-STAGE PLANNING
+.. _development_early_stage:
+
+Early-stage planning
+====================
 
 When contemplating a Linux kernel development project, it can be tempting
 to jump right in and start coding.  As with any significant project,
@@ -7,7 +10,8 @@
 communication can save far more time later on.
 
 
-3.1: SPECIFYING THE PROBLEM
+Specifying the problem
+----------------------
 
 Like any engineering project, a successful kernel enhancement starts with a
 clear description of the problem to be solved.  In some cases, this step is
@@ -64,7 +68,8 @@
 Only then does it make sense to start considering possible solutions.
 
 
-3.2: EARLY DISCUSSION
+Early discussion
+----------------
 
 When planning a kernel development project, it makes great sense to hold
 discussions with the community before launching into implementation.  Early
@@ -117,7 +122,8 @@
 avoided with some early discussion with the kernel developers.
 
 
-3.3: WHO DO YOU TALK TO?
+Who do you talk to?
+-------------------
 
 When developers decide to take their plans public, the next question will
 be: where do we start?  The answer is to find the right mailing list(s) and
@@ -141,6 +147,8 @@
 The task of finding the right maintainer is sometimes challenging enough
 that the kernel developers have added a script to ease the process:
 
+::
+
 	.../scripts/get_maintainer.pl
 
 This script will return the current maintainer(s) for a given file or
@@ -155,7 +163,8 @@
 track down a maintainer for a specific piece of code.
 
 
-3.4: WHEN TO POST?
+When to post?
+-------------
 
 If possible, posting your plans during the early stages can only be
 helpful.  Describe the problem being solved and any plans that have been
@@ -179,7 +188,8 @@
 community informed as you go.
 
 
-3.5: GETTING OFFICIAL BUY-IN
+Getting official buy-in
+-----------------------
 
 If your work is being done in a corporate environment - as most Linux
 kernel work is - you must, obviously, have permission from suitably
diff --git a/Documentation/development-process/4.Coding b/Documentation/development-process/4.Coding.rst
similarity index 97%
rename from Documentation/development-process/4.Coding
rename to Documentation/development-process/4.Coding.rst
index 9a3ee77..9d5cef9 100644
--- a/Documentation/development-process/4.Coding
+++ b/Documentation/development-process/4.Coding.rst
@@ -1,4 +1,7 @@
-4: GETTING THE CODE RIGHT
+.. _development_coding:
+
+Getting the code right
+======================
 
 While there is much to be said for a solid and community-oriented design
 process, the proof of any kernel development project is in the resulting
@@ -12,9 +15,11 @@
 quest.
 
 
-4.1: PITFALLS
+Pitfalls
+---------
 
-* Coding style
+Coding style
+************
 
 The kernel has long had a standard coding style, described in
 Documentation/CodingStyle.  For much of that time, the policies described
@@ -54,7 +59,8 @@
 80-column limit, for example), just do it.
 
 
-* Abstraction layers
+Abstraction layers
+******************
 
 Computer Science professors teach students to make extensive use of
 abstraction layers in the name of flexibility and information hiding.
@@ -87,7 +93,8 @@
 replicating the same code throughout the kernel.
 
 
-* #ifdef and preprocessor use in general
+#ifdef and preprocessor use in general
+**************************************
 
 The C preprocessor seems to present a powerful temptation to some C
 programmers, who see it as a way to efficiently encode a great deal of
@@ -113,7 +120,8 @@
 the compiler to perform type checking on the arguments and return value.
 
 
-* Inline functions
+Inline functions
+****************
 
 Inline functions present a hazard of their own, though.  Programmers can
 become enamored of the perceived efficiency inherent in avoiding a function
@@ -137,7 +145,8 @@
 irrelevant.
 
 
-* Locking
+Locking
+*******
 
 In May, 2006, the "Devicescape" networking stack was, with great
 fanfare, released under the GPL and made available for inclusion in the
@@ -151,7 +160,7 @@
 corporate doors.  But one large problem in particular was that it was not
 designed to work on multiprocessor systems.  Before this networking stack
 (now called mac80211) could be merged, a locking scheme needed to be
-retrofitted onto it.  
+retrofitted onto it.
 
 Once upon a time, Linux kernel code could be developed without thinking
 about the concurrency issues presented by multiprocessor systems.  Now,
@@ -169,7 +178,8 @@
 attention to concurrency will have a difficult path into the mainline.
 
 
-* Regressions
+Regressions
+***********
 
 One final hazard worth mentioning is this: it can be tempting to make a
 change (which may bring big improvements) which causes something to break
@@ -185,6 +195,8 @@
 breaks?  The best answer to this question was expressed by Linus in July,
 2007:
 
+::
+
 	So we don't fix bugs by introducing new problems.  That way lies
 	madness, and nobody ever knows if you actually make any real
 	progress at all. Is it two steps forwards, one step back, or one
@@ -201,8 +213,8 @@
 user-space interfaces is always required.
 
 
-
-4.2: CODE CHECKING TOOLS
+Code checking tools
+-------------------
 
 For now, at least, the writing of error-free code remains an ideal that few
 of us can reach.  What we can hope to do, though, is to catch and fix as
@@ -250,7 +262,7 @@
 There are quite a few other debugging options, some of which will be
 discussed below.  Some of them have a significant performance impact and
 should not be used all of the time.  But some time spent learning the
-available options will likely be paid back many times over in short order. 
+available options will likely be paid back many times over in short order.
 
 One of the heavier debugging tools is the locking checker, or "lockdep."
 This tool will track the acquisition and release of every lock (spinlock or
@@ -263,7 +275,7 @@
 developers and users) in a deployed system; lockdep allows them to be found
 in an automated manner ahead of time.  Code with any sort of non-trivial
 locking should be run with lockdep enabled before being submitted for
-inclusion. 
+inclusion.
 
 As a diligent kernel programmer, you will, beyond doubt, check the return
 status of any operation (such as a memory allocation) which can fail.  The
@@ -300,7 +312,7 @@
 Other kinds of portability errors are best found by compiling your code for
 other architectures.  If you do not happen to have an S/390 system or a
 Blackfin development board handy, you can still perform the compilation
-step.  A large set of cross compilers for x86 systems can be found at 
+step.  A large set of cross compilers for x86 systems can be found at
 
 	http://www.kernel.org/pub/tools/crosstool/
 
@@ -308,7 +320,8 @@
 embarrassment later.
 
 
-4.3: DOCUMENTATION
+Documentation
+-------------
 
 Documentation has often been more the exception than the rule with kernel
 development.  Even so, adequate documentation will help to ease the merging
@@ -364,7 +377,8 @@
 "cleanup" needs a comment saying why it is done the way it is.  And so on.
 
 
-4.4: INTERNAL API CHANGES
+Internal API changes
+--------------------
 
 The binary interface provided by the kernel to user space cannot be broken
 except under the most severe circumstances.  The kernel's internal
diff --git a/Documentation/development-process/5.Posting b/Documentation/development-process/5.Posting.rst
similarity index 97%
rename from Documentation/development-process/5.Posting
rename to Documentation/development-process/5.Posting.rst
index 8a48c9b..b511ddf 100644
--- a/Documentation/development-process/5.Posting
+++ b/Documentation/development-process/5.Posting.rst
@@ -1,4 +1,7 @@
-5: POSTING PATCHES
+.. _development_posting:
+
+Posting patches
+===============
 
 Sooner or later, the time comes when your work is ready to be presented to
 the community for review and, eventually, inclusion into the mainline
@@ -11,7 +14,8 @@
 directory.
 
 
-5.1: WHEN TO POST
+When to post
+------------
 
 There is a constant temptation to avoid posting patches before they are
 completely "ready."  For simple patches, that is not a problem.  If the
@@ -27,7 +31,8 @@
 with the idea that they can help you drive the work in the right direction.
 
 
-5.2: BEFORE CREATING PATCHES
+Before creating patches
+-----------------------
 
 There are a number of things which should be done before you consider
 sending patches to the development community.  These include:
@@ -52,7 +57,8 @@
 always pays back the effort in short order.
 
 
-5.3: PATCH PREPARATION
+Patch preparation
+-----------------
 
 The preparation of patches for posting can be a surprising amount of work,
 but, once again, attempting to save time here is not generally advisable
@@ -122,7 +128,8 @@
 done.  When done properly, though, it is time well spent.
 
 
-5.4: PATCH FORMATTING AND CHANGELOGS
+Patch formatting and changelogs
+-------------------------------
 
 So now you have a perfect series of patches for posting, but the work is
 not done quite yet.  Each patch needs to be formatted into a message which
@@ -140,6 +147,8 @@
    subsystem name first, followed by the purpose of the patch.  For
    example:
 
+   ::
+
 	gpio: fix build on CONFIG_GPIO_SYSFS=n
 
  - A blank line followed by a detailed description of the contents of the
@@ -192,6 +201,8 @@
 detail in the SubmittingPatches document; what follows here is a brief
 summary.  Each of these lines has the format:
 
+::
+
 	tag: Full Name <email address>  optional-other-stuff
 
 The tags in common use are:
@@ -225,7 +236,8 @@
 for addition without the explicit permission of the person named.
 
 
-5.5: SENDING THE PATCH
+Sending the patch
+-----------------
 
 Before you mail your patches, there are a couple of other things you should
 take care of:
@@ -287,6 +299,8 @@
 Patches need good subject lines.  The canonical format for a patch line is
 something like:
 
+::
+
 	[PATCH nn/mm] subsys: one-line description of the patch
 
 where "nn" is the ordinal number of the patch, "mm" is the total number of
diff --git a/Documentation/development-process/6.Followthrough b/Documentation/development-process/6.Followthrough.rst
similarity index 97%
rename from Documentation/development-process/6.Followthrough
rename to Documentation/development-process/6.Followthrough.rst
index 41d324a..a173cd5 100644
--- a/Documentation/development-process/6.Followthrough
+++ b/Documentation/development-process/6.Followthrough.rst
@@ -1,4 +1,7 @@
-6: FOLLOWTHROUGH
+.. _development_followthrough:
+
+Followthrough
+=============
 
 At this point, you have followed the guidelines given so far and, with the
 addition of your own engineering skills, have posted a perfect series of
@@ -16,7 +19,8 @@
 prevent the inclusion of your patches into the mainline.
 
 
-6.1: WORKING WITH REVIEWERS
+Working with reviewers
+----------------------
 
 A patch of any significance will result in a number of comments from other
 developers as they review the code.  Working with reviewers can be, for
@@ -97,7 +101,8 @@
 in mind, of course, that he may not agree with you either.
 
 
-6.2: WHAT HAPPENS NEXT
+What happens next
+-----------------
 
 If a patch is considered to be a good thing to add to the kernel, and once
 most of the review issues have been resolved, the next step is usually
@@ -177,7 +182,8 @@
 afterward.
 
 
-6.3: OTHER THINGS THAT CAN HAPPEN
+Other things that can happen
+-----------------------------
 
 One day, you may open your mail client and see that somebody has mailed you
 a patch to your code.  That is one of the advantages of having your code
diff --git a/Documentation/development-process/7.AdvancedTopics b/Documentation/development-process/7.AdvancedTopics.rst
similarity index 97%
rename from Documentation/development-process/7.AdvancedTopics
rename to Documentation/development-process/7.AdvancedTopics.rst
index 26dc3fa..81d61c5 100644
--- a/Documentation/development-process/7.AdvancedTopics
+++ b/Documentation/development-process/7.AdvancedTopics.rst
@@ -1,11 +1,15 @@
-7: ADVANCED TOPICS
+.. _development_advancedtopics:
+
+Advanced topics
+===============
 
 At this point, hopefully, you have a handle on how the development process
 works.  There is still more to learn, however!  This section will cover a
 number of topics which can be helpful for developers wanting to become a
 regular part of the Linux kernel development process.
 
-7.1: MANAGING PATCHES WITH GIT
+Managing patches with git
+-------------------------
 
 The use of distributed version control for the kernel began in early 2002,
 when Linus first started playing with the proprietary BitKeeper
@@ -114,6 +118,8 @@
 thing happening; putting up a git tree with unreviewed or off-topic patches
 can affect your ability to get trees pulled in the future.  Quoting Linus:
 
+::
+
 	You can send me patches, but for me to pull a git patch from you, I
 	need to know that you know what you're doing, and I need to be able
 	to trust things *without* then having to go and check every
@@ -141,7 +147,8 @@
 sure that you have remembered to push those changes to the public server.
 
 
-7.2: REVIEWING PATCHES
+Reviewing patches
+-----------------
 
 Some readers will certainly object to putting this section with "advanced
 topics" on the grounds that even beginning kernel developers should be
diff --git a/Documentation/development-process/8.Conclusion b/Documentation/development-process/8.Conclusion.rst
similarity index 96%
rename from Documentation/development-process/8.Conclusion
rename to Documentation/development-process/8.Conclusion.rst
index caef690..23ec7cb 100644
--- a/Documentation/development-process/8.Conclusion
+++ b/Documentation/development-process/8.Conclusion.rst
@@ -1,4 +1,7 @@
-8: FOR MORE INFORMATION
+.. _development_conclusion:
+
+For more information
+====================
 
 There are numerous sources of information on Linux kernel development and
 related topics.  First among those will always be the Documentation
@@ -47,7 +50,8 @@
 	http://www.kernel.org/pub/software/scm/git/docs/user-manual.html
 
 
-9: CONCLUSION
+Conclusion
+==========
 
 Congratulations to anybody who has made it through this long-winded
 document.  Hopefully it has provided a helpful understanding of how the
diff --git a/Documentation/development-process/conf.py b/Documentation/development-process/conf.py
new file mode 100644
index 0000000..4b4a12d
--- /dev/null
+++ b/Documentation/development-process/conf.py
@@ -0,0 +1,10 @@
+# -*- coding: utf-8; mode: python -*-
+
+project = 'Linux Kernel Development Documentation'
+
+tags.add("subproject")
+
+latex_documents = [
+    ('index', 'development-process.tex', 'Linux Kernel Development Documentation',
+     'The kernel development community', 'manual'),
+]
diff --git a/Documentation/development-process/development-process.rst b/Documentation/development-process/development-process.rst
new file mode 100644
index 0000000..bd1399f
--- /dev/null
+++ b/Documentation/development-process/development-process.rst
@@ -0,0 +1,29 @@
+.. _development_process_main:
+
+A guide to the Kernel Development Process
+=========================================
+
+Contents:
+
+.. toctree::
+   :numbered:
+   :maxdepth: 2
+
+   1.Intro
+   2.Process
+   3.Early-stage
+   4.Coding
+   5.Posting
+   6.Followthrough
+   7.AdvancedTopics
+   8.Conclusion
+
+The purpose of this document is to help developers (and their managers)
+work with the development community with a minimum of frustration.  It is
+an attempt to document how this community works in a way which is
+accessible to those who are not intimately familiar with Linux kernel
+development (or, indeed, free software development in general).  While
+there is some technical material here, this is very much a process-oriented
+discussion which does not require a deep knowledge of kernel programming to
+understand.
+
diff --git a/Documentation/development-process/index.rst b/Documentation/development-process/index.rst
new file mode 100644
index 0000000..c37475d
--- /dev/null
+++ b/Documentation/development-process/index.rst
@@ -0,0 +1,9 @@
+Linux Kernel Development Documentation
+======================================
+
+Contents:
+
+.. toctree::
+   :maxdepth: 2
+
+   development-process
diff --git a/Documentation/docutils.conf b/Documentation/docutils.conf
new file mode 100644
index 0000000..2830772
--- /dev/null
+++ b/Documentation/docutils.conf
@@ -0,0 +1,7 @@
+# -*- coding: utf-8 mode: conf-colon -*-
+#
+# docutils configuration file
+# http://docutils.sourceforge.net/docs/user/config.html
+
+[general]
+halt_level: severe
\ No newline at end of file
diff --git a/Documentation/driver-api/basics.rst b/Documentation/driver-api/basics.rst
new file mode 100644
index 0000000..935b9b8
--- /dev/null
+++ b/Documentation/driver-api/basics.rst
@@ -0,0 +1,120 @@
+Driver Basics
+=============
+
+Driver Entry and Exit points
+----------------------------
+
+.. kernel-doc:: include/linux/init.h
+   :internal:
+
+Atomic and pointer manipulation
+-------------------------------
+
+.. kernel-doc:: arch/x86/include/asm/atomic.h
+   :internal:
+
+Delaying, scheduling, and timer routines
+----------------------------------------
+
+.. kernel-doc:: include/linux/sched.h
+   :internal:
+
+.. kernel-doc:: kernel/sched/core.c
+   :export:
+
+.. kernel-doc:: kernel/sched/cpupri.c
+   :internal:
+
+.. kernel-doc:: kernel/sched/fair.c
+   :internal:
+
+.. kernel-doc:: include/linux/completion.h
+   :internal:
+
+.. kernel-doc:: kernel/time/timer.c
+   :export:
+
+Wait queues and Wake events
+---------------------------
+
+.. kernel-doc:: include/linux/wait.h
+   :internal:
+
+.. kernel-doc:: kernel/sched/wait.c
+   :export:
+
+High-resolution timers
+----------------------
+
+.. kernel-doc:: include/linux/ktime.h
+   :internal:
+
+.. kernel-doc:: include/linux/hrtimer.h
+   :internal:
+
+.. kernel-doc:: kernel/time/hrtimer.c
+   :export:
+
+Workqueues and Kevents
+----------------------
+
+.. kernel-doc:: include/linux/workqueue.h
+   :internal:
+
+.. kernel-doc:: kernel/workqueue.c
+   :export:
+
+Internal Functions
+------------------
+
+.. kernel-doc:: kernel/exit.c
+   :internal:
+
+.. kernel-doc:: kernel/signal.c
+   :internal:
+
+.. kernel-doc:: include/linux/kthread.h
+   :internal:
+
+.. kernel-doc:: kernel/kthread.c
+   :export:
+
+Kernel objects manipulation
+---------------------------
+
+.. kernel-doc:: lib/kobject.c
+   :export:
+
+Kernel utility functions
+------------------------
+
+.. kernel-doc:: include/linux/kernel.h
+   :internal:
+
+.. kernel-doc:: kernel/printk/printk.c
+   :export:
+
+.. kernel-doc:: kernel/panic.c
+   :export:
+
+.. kernel-doc:: kernel/sys.c
+   :export:
+
+.. kernel-doc:: kernel/rcu/srcu.c
+   :export:
+
+.. kernel-doc:: kernel/rcu/tree.c
+   :export:
+
+.. kernel-doc:: kernel/rcu/tree_plugin.h
+   :export:
+
+.. kernel-doc:: kernel/rcu/update.c
+   :export:
+
+Device Resource Management
+--------------------------
+
+.. kernel-doc:: drivers/base/devres.c
+   :export:
+
diff --git a/Documentation/driver-api/frame-buffer.rst b/Documentation/driver-api/frame-buffer.rst
new file mode 100644
index 0000000..9dd3060
--- /dev/null
+++ b/Documentation/driver-api/frame-buffer.rst
@@ -0,0 +1,62 @@
+Frame Buffer Library
+====================
+
+The frame buffer drivers depend heavily on four data structures. These
+structures are declared in include/linux/fb.h. They are fb_info,
+fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs. The last
+three can be made available to and from userland.
+
+fb_info defines the current state of a particular video card. Inside
+fb_info, there exists a fb_ops structure which is a collection of
+needed functions to make fbdev and fbcon work. fb_info is only visible
+to the kernel.
+
+fb_var_screeninfo is used to describe the features of a video card
+that are user defined. With fb_var_screeninfo, things such as depth
+and the resolution may be defined.
+
+The next structure is fb_fix_screeninfo. This defines the properties
+of a card that are created when a mode is set and can't be changed
+otherwise. A good example of this is the start of the frame buffer
+memory. This "locks" the address of the frame buffer memory, so that it
+cannot be changed or moved.
+
+The last structure is fb_monospecs. In the old API, there was little
+importance for fb_monospecs. This allowed for forbidden things such as
+setting a mode of 800x600 on a fix frequency monitor. With the new API,
+fb_monospecs prevents such things, and if used correctly, can prevent a
+monitor from being cooked. fb_monospecs will not be useful until
+kernels 2.5.x.
+
+Frame Buffer Memory
+-------------------
+
+.. kernel-doc:: drivers/video/fbdev/core/fbmem.c
+   :export:
+
+Frame Buffer Colormap
+---------------------
+
+.. kernel-doc:: drivers/video/fbdev/core/fbcmap.c
+   :export:
+
+Frame Buffer Video Mode Database
+--------------------------------
+
+.. kernel-doc:: drivers/video/fbdev/core/modedb.c
+   :internal:
+
+.. kernel-doc:: drivers/video/fbdev/core/modedb.c
+   :export:
+
+Frame Buffer Macintosh Video Mode Database
+------------------------------------------
+
+.. kernel-doc:: drivers/video/fbdev/macmodes.c
+   :export:
+
+Frame Buffer Fonts
+------------------
+
+Refer to the file lib/fonts/fonts.c for more information.
+
diff --git a/Documentation/driver-api/hsi.rst b/Documentation/driver-api/hsi.rst
new file mode 100644
index 0000000..f9cec02
--- /dev/null
+++ b/Documentation/driver-api/hsi.rst
@@ -0,0 +1,88 @@
+High Speed Synchronous Serial Interface (HSI)
+=============================================
+
+Introduction
+---------------
+
+High Speed Syncronous Interface (HSI) is a fullduplex, low latency protocol,
+that is optimized for die-level interconnect between an Application Processor
+and a Baseband chipset. It has been specified by the MIPI alliance in 2003 and
+implemented by multiple vendors since then.
+
+The HSI interface supports full duplex communication over multiple channels
+(typically 8) and is capable of reaching speeds up to 200 Mbit/s.
+
+The serial protocol uses two signals, DATA and FLAG as combined data and clock
+signals and an additional READY signal for flow control. An additional WAKE
+signal can be used to wakeup the chips from standby modes. The signals are
+commonly prefixed by AC for signals going from the application die to the
+cellular die and CA for signals going the other way around.
+
+::
+
+    +------------+                                 +---------------+
+    |  Cellular  |                                 |  Application  |
+    |    Die     |                                 |      Die      |
+    |            | - - - - - - CAWAKE - - - - - - >|               |
+    |           T|------------ CADATA ------------>|R              |
+    |           X|------------ CAFLAG ------------>|X              |
+    |            |<----------- ACREADY ------------|               |
+    |            |                                 |               |
+    |            |                                 |               |
+    |            |< - - - - -  ACWAKE - - - - - - -|               |
+    |           R|<----------- ACDATA -------------|T              |
+    |           X|<----------- ACFLAG -------------|X              |
+    |            |------------ CAREADY ----------->|               |
+    |            |                                 |               |
+    |            |                                 |               |
+    +------------+                                 +---------------+
+
+HSI Subsystem in Linux
+-------------------------
+
+In the Linux kernel the hsi subsystem is supposed to be used for HSI devices.
+The hsi subsystem contains drivers for hsi controllers including support for
+multi-port controllers and provides a generic API for using the HSI ports.
+
+It also contains HSI client drivers, which make use of the generic API to
+implement a protocol used on the HSI interface. These client drivers can
+use an arbitrary number of channels.
+
+hsi-char Device
+------------------
+
+Each port automatically registers a generic client driver called hsi_char,
+which provides a charecter device for userspace representing the HSI port.
+It can be used to communicate via HSI from userspace. Userspace may
+configure the hsi_char device using the following ioctl commands:
+
+HSC_RESET
+ flush the HSI port
+
+HSC_SET_PM
+ enable or disable the client.
+
+HSC_SEND_BREAK
+ send break
+
+HSC_SET_RX
+ set RX configuration
+
+HSC_GET_RX
+ get RX configuration
+
+HSC_SET_TX
+ set TX configuration
+
+HSC_GET_TX
+ get TX configuration
+
+The kernel HSI API
+------------------
+
+.. kernel-doc:: include/linux/hsi/hsi.h
+   :internal:
+
+.. kernel-doc:: drivers/hsi/hsi_core.c
+   :export:
+
diff --git a/Documentation/driver-api/i2c.rst b/Documentation/driver-api/i2c.rst
new file mode 100644
index 0000000..f3939f7
--- /dev/null
+++ b/Documentation/driver-api/i2c.rst
@@ -0,0 +1,46 @@
+I\ :sup:`2`\ C and SMBus Subsystem
+==================================
+
+I\ :sup:`2`\ C (or without fancy typography, "I2C") is an acronym for
+the "Inter-IC" bus, a simple bus protocol which is widely used where low
+data rate communications suffice. Since it's also a licensed trademark,
+some vendors use another name (such as "Two-Wire Interface", TWI) for
+the same bus. I2C only needs two signals (SCL for clock, SDA for data),
+conserving board real estate and minimizing signal quality issues. Most
+I2C devices use seven bit addresses, and bus speeds of up to 400 kHz;
+there's a high speed extension (3.4 MHz) that's not yet found wide use.
+I2C is a multi-master bus; open drain signaling is used to arbitrate
+between masters, as well as to handshake and to synchronize clocks from
+slower clients.
+
+The Linux I2C programming interfaces support only the master side of bus
+interactions, not the slave side. The programming interface is
+structured around two kinds of driver, and two kinds of device. An I2C
+"Adapter Driver" abstracts the controller hardware; it binds to a
+physical device (perhaps a PCI device or platform_device) and exposes a
+:c:type:`struct i2c_adapter <i2c_adapter>` representing each
+I2C bus segment it manages. On each I2C bus segment will be I2C devices
+represented by a :c:type:`struct i2c_client <i2c_client>`.
+Those devices will be bound to a :c:type:`struct i2c_driver
+<i2c_driver>`, which should follow the standard Linux driver
+model. (At this writing, a legacy model is more widely used.) There are
+functions to perform various I2C protocol operations; at this writing
+all such functions are usable only from task context.
+
+The System Management Bus (SMBus) is a sibling protocol. Most SMBus
+systems are also I2C conformant. The electrical constraints are tighter
+for SMBus, and it standardizes particular protocol messages and idioms.
+Controllers that support I2C can also support most SMBus operations, but
+SMBus controllers don't support all the protocol options that an I2C
+controller will. There are functions to perform various SMBus protocol
+operations, either using I2C primitives or by issuing SMBus commands to
+i2c_adapter devices which don't support those I2C operations.
+
+.. kernel-doc:: include/linux/i2c.h
+   :internal:
+
+.. kernel-doc:: drivers/i2c/i2c-boardinfo.c
+   :functions: i2c_register_board_info
+
+.. kernel-doc:: drivers/i2c/i2c-core.c
+   :export:
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
new file mode 100644
index 0000000..8e259c5d
--- /dev/null
+++ b/Documentation/driver-api/index.rst
@@ -0,0 +1,26 @@
+========================================
+The Linux driver implementer's API guide
+========================================
+
+The kernel offers a wide variety of interfaces to support the development
+of device drivers.  This document is an only somewhat organized collection
+of some of those interfaces — it will hopefully get better over time!  The
+available subsections can be seen below.
+
+.. class:: toc-title
+
+	   Table of contents
+
+.. toctree::
+   :maxdepth: 2
+
+   basics
+   infrastructure
+   message-based
+   sound
+   frame-buffer
+   input
+   spi
+   i2c
+   hsi
+   miscellaneous
diff --git a/Documentation/driver-api/infrastructure.rst b/Documentation/driver-api/infrastructure.rst
new file mode 100644
index 0000000..5d50d67
--- /dev/null
+++ b/Documentation/driver-api/infrastructure.rst
@@ -0,0 +1,169 @@
+Device drivers infrastructure
+=============================
+
+The Basic Device Driver-Model Structures
+----------------------------------------
+
+.. kernel-doc:: include/linux/device.h
+   :internal:
+
+Device Drivers Base
+-------------------
+
+.. kernel-doc:: drivers/base/init.c
+   :internal:
+
+.. kernel-doc:: drivers/base/driver.c
+   :export:
+
+.. kernel-doc:: drivers/base/core.c
+   :export:
+
+.. kernel-doc:: drivers/base/syscore.c
+   :export:
+
+.. kernel-doc:: drivers/base/class.c
+   :export:
+
+.. kernel-doc:: drivers/base/node.c
+   :internal:
+
+.. kernel-doc:: drivers/base/firmware_class.c
+   :export:
+
+.. kernel-doc:: drivers/base/transport_class.c
+   :export:
+
+.. kernel-doc:: drivers/base/dd.c
+   :export:
+
+.. kernel-doc:: include/linux/platform_device.h
+   :internal:
+
+.. kernel-doc:: drivers/base/platform.c
+   :export:
+
+.. kernel-doc:: drivers/base/bus.c
+   :export:
+
+Buffer Sharing and Synchronization
+----------------------------------
+
+The dma-buf subsystem provides the framework for sharing buffers for
+hardware (DMA) access across multiple device drivers and subsystems, and
+for synchronizing asynchronous hardware access.
+
+This is used, for example, by drm "prime" multi-GPU support, but is of
+course not limited to GPU use cases.
+
+The three main components of this are: (1) dma-buf, representing a
+sg_table and exposed to userspace as a file descriptor to allow passing
+between devices, (2) fence, which provides a mechanism to signal when
+one device as finished access, and (3) reservation, which manages the
+shared or exclusive fence(s) associated with the buffer.
+
+dma-buf
+~~~~~~~
+
+.. kernel-doc:: drivers/dma-buf/dma-buf.c
+   :export:
+
+.. kernel-doc:: include/linux/dma-buf.h
+   :internal:
+
+reservation
+~~~~~~~~~~~
+
+.. kernel-doc:: drivers/dma-buf/reservation.c
+   :doc: Reservation Object Overview
+
+.. kernel-doc:: drivers/dma-buf/reservation.c
+   :export:
+
+.. kernel-doc:: include/linux/reservation.h
+   :internal:
+
+fence
+~~~~~
+
+.. kernel-doc:: drivers/dma-buf/fence.c
+   :export:
+
+.. kernel-doc:: include/linux/fence.h
+   :internal:
+
+.. kernel-doc:: drivers/dma-buf/seqno-fence.c
+   :export:
+
+.. kernel-doc:: include/linux/seqno-fence.h
+   :internal:
+
+.. kernel-doc:: drivers/dma-buf/fence-array.c
+   :export:
+
+.. kernel-doc:: include/linux/fence-array.h
+   :internal:
+
+.. kernel-doc:: drivers/dma-buf/reservation.c
+   :export:
+
+.. kernel-doc:: include/linux/reservation.h
+   :internal:
+
+.. kernel-doc:: drivers/dma-buf/sync_file.c
+   :export:
+
+.. kernel-doc:: include/linux/sync_file.h
+   :internal:
+
+Device Drivers DMA Management
+-----------------------------
+
+.. kernel-doc:: drivers/base/dma-coherent.c
+   :export:
+
+.. kernel-doc:: drivers/base/dma-mapping.c
+   :export:
+
+Device Drivers Power Management
+-------------------------------
+
+.. kernel-doc:: drivers/base/power/main.c
+   :export:
+
+Device Drivers ACPI Support
+---------------------------
+
+.. kernel-doc:: drivers/acpi/scan.c
+   :export:
+
+.. kernel-doc:: drivers/acpi/scan.c
+   :internal:
+
+Device drivers PnP support
+--------------------------
+
+.. kernel-doc:: drivers/pnp/core.c
+   :internal:
+
+.. kernel-doc:: drivers/pnp/card.c
+   :export:
+
+.. kernel-doc:: drivers/pnp/driver.c
+   :internal:
+
+.. kernel-doc:: drivers/pnp/manager.c
+   :export:
+
+.. kernel-doc:: drivers/pnp/support.c
+   :export:
+
+Userspace IO devices
+--------------------
+
+.. kernel-doc:: drivers/uio/uio.c
+   :export:
+
+.. kernel-doc:: include/linux/uio_driver.h
+   :internal:
+
diff --git a/Documentation/driver-api/input.rst b/Documentation/driver-api/input.rst
new file mode 100644
index 0000000..d05bf58
--- /dev/null
+++ b/Documentation/driver-api/input.rst
@@ -0,0 +1,51 @@
+Input Subsystem
+===============
+
+Input core
+----------
+
+.. kernel-doc:: include/linux/input.h
+   :internal:
+
+.. kernel-doc:: drivers/input/input.c
+   :export:
+
+.. kernel-doc:: drivers/input/ff-core.c
+   :export:
+
+.. kernel-doc:: drivers/input/ff-memless.c
+   :export:
+
+Multitouch Library
+------------------
+
+.. kernel-doc:: include/linux/input/mt.h
+   :internal:
+
+.. kernel-doc:: drivers/input/input-mt.c
+   :export:
+
+Polled input devices
+--------------------
+
+.. kernel-doc:: include/linux/input-polldev.h
+   :internal:
+
+.. kernel-doc:: drivers/input/input-polldev.c
+   :export:
+
+Matrix keyboards/keypads
+------------------------
+
+.. kernel-doc:: include/linux/input/matrix_keypad.h
+   :internal:
+
+Sparse keymap support
+---------------------
+
+.. kernel-doc:: include/linux/input/sparse-keymap.h
+   :internal:
+
+.. kernel-doc:: drivers/input/sparse-keymap.c
+   :export:
+
diff --git a/Documentation/driver-api/message-based.rst b/Documentation/driver-api/message-based.rst
new file mode 100644
index 0000000..18ff94e
--- /dev/null
+++ b/Documentation/driver-api/message-based.rst
@@ -0,0 +1,12 @@
+Message-based devices
+=====================
+
+Fusion message devices
+----------------------
+
+.. kernel-doc:: drivers/message/fusion/mptbase.c
+   :export:
+
+.. kernel-doc:: drivers/message/fusion/mptscsih.c
+   :export:
+
diff --git a/Documentation/driver-api/miscellaneous.rst b/Documentation/driver-api/miscellaneous.rst
new file mode 100644
index 0000000..8da7d11
--- /dev/null
+++ b/Documentation/driver-api/miscellaneous.rst
@@ -0,0 +1,50 @@
+Parallel Port Devices
+=====================
+
+.. kernel-doc:: include/linux/parport.h
+   :internal:
+
+.. kernel-doc:: drivers/parport/ieee1284.c
+   :export:
+
+.. kernel-doc:: drivers/parport/share.c
+   :export:
+
+.. kernel-doc:: drivers/parport/daisy.c
+   :internal:
+
+16x50 UART Driver
+=================
+
+.. kernel-doc:: drivers/tty/serial/serial_core.c
+   :export:
+
+.. kernel-doc:: drivers/tty/serial/8250/8250_core.c
+   :export:
+
+Pulse-Width Modulation (PWM)
+============================
+
+Pulse-width modulation is a modulation technique primarily used to
+control power supplied to electrical devices.
+
+The PWM framework provides an abstraction for providers and consumers of
+PWM signals. A controller that provides one or more PWM signals is
+registered as :c:type:`struct pwm_chip <pwm_chip>`. Providers
+are expected to embed this structure in a driver-specific structure.
+This structure contains fields that describe a particular chip.
+
+A chip exposes one or more PWM signal sources, each of which exposed as
+a :c:type:`struct pwm_device <pwm_device>`. Operations can be
+performed on PWM devices to control the period, duty cycle, polarity and
+active state of the signal.
+
+Note that PWM devices are exclusive resources: they can always only be
+used by one consumer at a time.
+
+.. kernel-doc:: include/linux/pwm.h
+   :internal:
+
+.. kernel-doc:: drivers/pwm/core.c
+   :export:
+   
diff --git a/Documentation/driver-api/sound.rst b/Documentation/driver-api/sound.rst
new file mode 100644
index 0000000..afef6ea
--- /dev/null
+++ b/Documentation/driver-api/sound.rst
@@ -0,0 +1,54 @@
+Sound Devices
+=============
+
+.. kernel-doc:: include/sound/core.h
+   :internal:
+
+.. kernel-doc:: sound/sound_core.c
+   :export:
+
+.. kernel-doc:: include/sound/pcm.h
+   :internal:
+
+.. kernel-doc:: sound/core/pcm.c
+   :export:
+
+.. kernel-doc:: sound/core/device.c
+   :export:
+
+.. kernel-doc:: sound/core/info.c
+   :export:
+
+.. kernel-doc:: sound/core/rawmidi.c
+   :export:
+
+.. kernel-doc:: sound/core/sound.c
+   :export:
+
+.. kernel-doc:: sound/core/memory.c
+   :export:
+
+.. kernel-doc:: sound/core/pcm_memory.c
+   :export:
+
+.. kernel-doc:: sound/core/init.c
+   :export:
+
+.. kernel-doc:: sound/core/isadma.c
+   :export:
+
+.. kernel-doc:: sound/core/control.c
+   :export:
+
+.. kernel-doc:: sound/core/pcm_lib.c
+   :export:
+
+.. kernel-doc:: sound/core/hwdep.c
+   :export:
+
+.. kernel-doc:: sound/core/pcm_native.c
+   :export:
+
+.. kernel-doc:: sound/core/memalloc.c
+   :export:
+
diff --git a/Documentation/driver-api/spi.rst b/Documentation/driver-api/spi.rst
new file mode 100644
index 0000000..f64cb66
--- /dev/null
+++ b/Documentation/driver-api/spi.rst
@@ -0,0 +1,53 @@
+Serial Peripheral Interface (SPI)
+=================================
+
+SPI is the "Serial Peripheral Interface", widely used with embedded
+systems because it is a simple and efficient interface: basically a
+multiplexed shift register. Its three signal wires hold a clock (SCK,
+often in the range of 1-20 MHz), a "Master Out, Slave In" (MOSI) data
+line, and a "Master In, Slave Out" (MISO) data line. SPI is a full
+duplex protocol; for each bit shifted out the MOSI line (one per clock)
+another is shifted in on the MISO line. Those bits are assembled into
+words of various sizes on the way to and from system memory. An
+additional chipselect line is usually active-low (nCS); four signals are
+normally used for each peripheral, plus sometimes an interrupt.
+
+The SPI bus facilities listed here provide a generalized interface to
+declare SPI busses and devices, manage them according to the standard
+Linux driver model, and perform input/output operations. At this time,
+only "master" side interfaces are supported, where Linux talks to SPI
+peripherals and does not implement such a peripheral itself. (Interfaces
+to support implementing SPI slaves would necessarily look different.)
+
+The programming interface is structured around two kinds of driver, and
+two kinds of device. A "Controller Driver" abstracts the controller
+hardware, which may be as simple as a set of GPIO pins or as complex as
+a pair of FIFOs connected to dual DMA engines on the other side of the
+SPI shift register (maximizing throughput). Such drivers bridge between
+whatever bus they sit on (often the platform bus) and SPI, and expose
+the SPI side of their device as a :c:type:`struct spi_master
+<spi_master>`. SPI devices are children of that master,
+represented as a :c:type:`struct spi_device <spi_device>` and
+manufactured from :c:type:`struct spi_board_info
+<spi_board_info>` descriptors which are usually provided by
+board-specific initialization code. A :c:type:`struct spi_driver
+<spi_driver>` is called a "Protocol Driver", and is bound to a
+spi_device using normal driver model calls.
+
+The I/O model is a set of queued messages. Protocol drivers submit one
+or more :c:type:`struct spi_message <spi_message>` objects,
+which are processed and completed asynchronously. (There are synchronous
+wrappers, however.) Messages are built from one or more
+:c:type:`struct spi_transfer <spi_transfer>` objects, each of
+which wraps a full duplex SPI transfer. A variety of protocol tweaking
+options are needed, because different chips adopt very different
+policies for how they use the bits transferred with SPI.
+
+.. kernel-doc:: include/linux/spi/spi.h
+   :internal:
+
+.. kernel-doc:: drivers/spi/spi.c
+   :functions: spi_register_board_info
+
+.. kernel-doc:: drivers/spi/spi.c
+   :export:
diff --git a/Documentation/driver-model/device.txt b/Documentation/driver-model/device.txt
index 1e70220..2403eb8 100644
--- a/Documentation/driver-model/device.txt
+++ b/Documentation/driver-model/device.txt
@@ -50,7 +50,7 @@
 Please see Documentation/filesystems/sysfs.txt for more information
 on how sysfs works.
 
-As explained in Documentation/kobject.txt, device attributes must be be
+As explained in Documentation/kobject.txt, device attributes must be
 created before the KOBJ_ADD uevent is generated. The only way to realize
 that is by defining an attribute group.
 
diff --git a/Documentation/email-clients.txt b/Documentation/email-clients.txt
index 2d485de..ac892b3 100644
--- a/Documentation/email-clients.txt
+++ b/Documentation/email-clients.txt
@@ -1,23 +1,27 @@
+.. _email_clients:
+
 Email clients info for Linux
-======================================================================
+============================
 
 Git
-----------------------------------------------------------------------
-These days most developers use `git send-email` instead of regular
-email clients.  The man page for this is quite good.  On the receiving
-end, maintainers use `git am` to apply the patches.
+---
 
-If you are new to git then send your first patch to yourself.  Save it
-as raw text including all the headers.  Run `git am raw_email.txt` and
-then review the changelog with `git log`.  When that works then send
+These days most developers use ``git send-email`` instead of regular
+email clients.  The man page for this is quite good.  On the receiving
+end, maintainers use ``git am`` to apply the patches.
+
+If you are new to ``git`` then send your first patch to yourself.  Save it
+as raw text including all the headers.  Run ``git am raw_email.txt`` and
+then review the changelog with ``git log``.  When that works then send
 the patch to the appropriate mailing list(s).
 
 General Preferences
-----------------------------------------------------------------------
+-------------------
+
 Patches for the Linux kernel are submitted via email, preferably as
 inline text in the body of the email.  Some maintainers accept
 attachments, but then the attachments should have content-type
-"text/plain".  However, attachments are generally frowned upon because
+``text/plain``.  However, attachments are generally frowned upon because
 it makes quoting portions of the patch more difficult in the patch
 review process.
 
@@ -25,7 +29,7 @@
 patch text untouched.  For example, they should not modify or delete tabs
 or spaces, even at the beginning or end of lines.
 
-Don't send patches with "format=flowed".  This can cause unexpected
+Don't send patches with ``format=flowed``.  This can cause unexpected
 and unwanted line breaks.
 
 Don't let your email client do automatic word wrapping for you.
@@ -54,57 +58,63 @@
 
 
 Some email client (MUA) hints
-----------------------------------------------------------------------
+-----------------------------
+
 Here are some specific MUA configuration hints for editing and sending
 patches for the Linux kernel.  These are not meant to be complete
 software package configuration summaries.
 
-Legend:
-TUI = text-based user interface
-GUI = graphical user interface
 
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Legend:
+
+- TUI = text-based user interface
+- GUI = graphical user interface
+
 Alpine (TUI)
+************
 
 Config options:
-In the "Sending Preferences" section:
 
-- "Do Not Send Flowed Text" must be enabled
-- "Strip Whitespace Before Sending" must be disabled
+In the :menuselection:`Sending Preferences` section:
+
+- :menuselection:`Do Not Send Flowed Text` must be ``enabled``
+- :menuselection:`Strip Whitespace Before Sending` must be ``disabled``
 
 When composing the message, the cursor should be placed where the patch
-should appear, and then pressing CTRL-R let you specify the patch file
+should appear, and then pressing :kbd:`CTRL-R` let you specify the patch file
 to insert into the message.
 
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Claws Mail (GUI)
+****************
 
 Works. Some people use this successfully for patches.
 
-To insert a patch use Message->Insert File (CTRL+i) or an external editor.
+To insert a patch use :menuselection:`Message-->Insert` File (:kbd:`CTRL-I`)
+or an external editor.
 
 If the inserted patch has to be edited in the Claws composition window
-"Auto wrapping" in Configuration->Preferences->Compose->Wrapping should be
+"Auto wrapping" in
+:menuselection:`Configuration-->Preferences-->Compose-->Wrapping` should be
 disabled.
 
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Evolution (GUI)
+***************
 
 Some people use this successfully for patches.
 
 When composing mail select: Preformat
-  from Format->Paragraph Style->Preformatted (Ctrl-7)
+  from :menuselection:`Format-->Paragraph Style-->Preformatted` (:kbd:`CTRL-7`)
   or the toolbar
 
 Then use:
-  Insert->Text File... (Alt-n x)
+:menuselection:`Insert-->Text File...` (:kbd:`ALT-N x`)
 to insert the patch.
 
-You can also "diff -Nru old.c new.c | xclip", select Preformat, then
-paste with the middle button.
+You can also ``diff -Nru old.c new.c | xclip``, select
+:menuselection:`Preformat`, then paste with the middle button.
 
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Kmail (GUI)
+***********
 
 Some people use Kmail successfully for patches.
 
@@ -120,11 +130,12 @@
 wrapping.
 
 At the bottom of your email, put the commonly-used patch delimiter before
-inserting your patch:  three hyphens (---).
+inserting your patch:  three hyphens (``---``).
 
-Then from the "Message" menu item, select insert file and choose your patch.
+Then from the :menuselection:`Message` menu item, select insert file and
+choose your patch.
 As an added bonus you can customise the message creation toolbar menu
-and put the "insert file" icon there.
+and put the :menuselection:`insert file` icon there.
 
 Make the composer window wide enough so that no lines wrap. As of
 KMail 1.13.5 (KDE 4.5.4), KMail will apply word wrapping when sending
@@ -139,86 +150,96 @@
 
 If you absolutely must send patches as attachments instead of inlining
 them as text, right click on the attachment and select properties, and
-highlight "Suggest automatic display" to make the attachment inlined to
-make it more viewable.
+highlight :menuselection:`Suggest automatic display` to make the attachment
+inlined to make it more viewable.
 
 When saving patches that are sent as inlined text, select the email that
 contains the patch from the message list pane, right click and select
-"save as".  You can use the whole email unmodified as a patch if it was
-properly composed.  There is no option currently to save the email when you
-are actually viewing it in its own window -- there has been a request filed
-at kmail's bugzilla and hopefully this will be addressed.  Emails are saved
-as read-write for user only so you will have to chmod them to make them
+:menuselection:`save as`.  You can use the whole email unmodified as a patch
+if it was properly composed.  There is no option currently to save the email
+when you are actually viewing it in its own window -- there has been a request
+filed at kmail's bugzilla and hopefully this will be addressed.  Emails are
+saved as read-write for user only so you will have to chmod them to make them
 group and world readable if you copy them elsewhere.
 
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Lotus Notes (GUI)
+*****************
 
 Run away from it.
 
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Mutt (TUI)
+**********
 
-Plenty of Linux developers use mutt, so it must work pretty well.
+Plenty of Linux developers use ``mutt``, so it must work pretty well.
 
 Mutt doesn't come with an editor, so whatever editor you use should be
 used in a way that there are no automatic linebreaks.  Most editors have
-an "insert file" option that inserts the contents of a file unaltered.
+an :menuselection:`insert file` option that inserts the contents of a file
+unaltered.
 
-To use 'vim' with mutt:
+To use ``vim`` with mutt::
+
   set editor="vi"
 
-  If using xclip, type the command
+If using xclip, type the command::
+
   :set paste
-  before middle button or shift-insert or use
+
+before middle button or shift-insert or use::
+
   :r filename
 
 if you want to include the patch inline.
-(a)ttach works fine without "set paste".
+(a)ttach works fine without ``set paste``.
 
-You can also generate patches with 'git format-patch' and then use Mutt
-to send them:
+You can also generate patches with ``git format-patch`` and then use Mutt
+to send them::
+
     $ mutt -H 0001-some-bug-fix.patch
 
 Config options:
+
 It should work with default settings.
-However, it's a good idea to set the "send_charset" to:
+However, it's a good idea to set the ``send_charset`` to::
+
   set send_charset="us-ascii:utf-8"
 
 Mutt is highly customizable. Here is a minimum configuration to start
-using Mutt to send patches through Gmail:
+using Mutt to send patches through Gmail::
 
-# .muttrc
-# ================  IMAP ====================
-set imap_user = 'yourusername@gmail.com'
-set imap_pass = 'yourpassword'
-set spoolfile = imaps://imap.gmail.com/INBOX
-set folder = imaps://imap.gmail.com/
-set record="imaps://imap.gmail.com/[Gmail]/Sent Mail"
-set postponed="imaps://imap.gmail.com/[Gmail]/Drafts"
-set mbox="imaps://imap.gmail.com/[Gmail]/All Mail"
+  # .muttrc
+  # ================  IMAP ====================
+  set imap_user = 'yourusername@gmail.com'
+  set imap_pass = 'yourpassword'
+  set spoolfile = imaps://imap.gmail.com/INBOX
+  set folder = imaps://imap.gmail.com/
+  set record="imaps://imap.gmail.com/[Gmail]/Sent Mail"
+  set postponed="imaps://imap.gmail.com/[Gmail]/Drafts"
+  set mbox="imaps://imap.gmail.com/[Gmail]/All Mail"
 
-# ================  SMTP  ====================
-set smtp_url = "smtp://username@smtp.gmail.com:587/"
-set smtp_pass = $imap_pass
-set ssl_force_tls = yes # Require encrypted connection
+  # ================  SMTP  ====================
+  set smtp_url = "smtp://username@smtp.gmail.com:587/"
+  set smtp_pass = $imap_pass
+  set ssl_force_tls = yes # Require encrypted connection
 
-# ================  Composition  ====================
-set editor = `echo \$EDITOR`
-set edit_headers = yes  # See the headers when editing
-set charset = UTF-8     # value of $LANG; also fallback for send_charset
-# Sender, email address, and sign-off line must match
-unset use_domain        # because joe@localhost is just embarrassing
-set realname = "YOUR NAME"
-set from = "username@gmail.com"
-set use_from = yes
+  # ================  Composition  ====================
+  set editor = `echo \$EDITOR`
+  set edit_headers = yes  # See the headers when editing
+  set charset = UTF-8     # value of $LANG; also fallback for send_charset
+  # Sender, email address, and sign-off line must match
+  unset use_domain        # because joe@localhost is just embarrassing
+  set realname = "YOUR NAME"
+  set from = "username@gmail.com"
+  set use_from = yes
 
 The Mutt docs have lots more information:
+
     http://dev.mutt.org/trac/wiki/UseCases/Gmail
+
     http://dev.mutt.org/doc/manual.html
 
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Pine (TUI)
+**********
 
 Pine has had some whitespace truncation issues in the past, but these
 should all be fixed now.
@@ -226,12 +247,13 @@
 Use alpine (pine's successor) if you can.
 
 Config options:
-- quell-flowed-text is needed for recent versions
-- the "no-strip-whitespace-before-send" option is needed
+
+- ``quell-flowed-text`` is needed for recent versions
+- the ``no-strip-whitespace-before-send`` option is needed
 
 
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Sylpheed (GUI)
+**************
 
 - Works well for inlining text (or using attachments).
 - Allows use of an external editor.
@@ -241,50 +263,50 @@
 - Adding addresses to address book doesn't understand the display name
   properly.
 
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Thunderbird (GUI)
+*****************
 
 Thunderbird is an Outlook clone that likes to mangle text, but there are ways
 to coerce it into behaving.
 
 - Allow use of an external editor:
   The easiest thing to do with Thunderbird and patches is to use an
-  "external editor" extension and then just use your favorite $EDITOR
+  "external editor" extension and then just use your favorite ``$EDITOR``
   for reading/merging patches into the body text.  To do this, download
   and install the extension, then add a button for it using
-  View->Toolbars->Customize... and finally just click on it when in the
-  Compose dialog.
+  :menuselection:`View-->Toolbars-->Customize...` and finally just click on it
+  when in the :menuselection:`Compose` dialog.
 
   Please note that "external editor" requires that your editor must not
   fork, or in other words, the editor must not return before closing.
   You may have to pass additional flags or change the settings of your
   editor. Most notably if you are using gvim then you must pass the -f
-  option to gvim by putting "/usr/bin/gvim -f" (if the binary is in
-  /usr/bin) to the text editor field in "external editor" settings. If you
-  are using some other editor then please read its manual to find out how
-  to do this.
+  option to gvim by putting ``/usr/bin/gvim -f`` (if the binary is in
+  ``/usr/bin``) to the text editor field in :menuselection:`external editor`
+  settings. If you are using some other editor then please read its manual
+  to find out how to do this.
 
 To beat some sense out of the internal editor, do this:
 
-- Edit your Thunderbird config settings so that it won't use format=flowed.
-  Go to "edit->preferences->advanced->config editor" to bring up the
-  thunderbird's registry editor.
+- Edit your Thunderbird config settings so that it won't use ``format=flowed``.
+  Go to :menuselection:`edit-->preferences-->advanced-->config editor` to bring up
+  the thunderbird's registry editor.
 
-- Set "mailnews.send_plaintext_flowed" to "false"
+- Set ``mailnews.send_plaintext_flowed`` to ``false``
 
-- Set "mailnews.wraplength" from "72" to "0"
+- Set ``mailnews.wraplength`` from ``72`` to ``0``
 
-- "View" > "Message Body As" > "Plain Text"
+- :menuselection:`View-->Message Body As-->Plain Text`
 
-- "View" > "Character Encoding" > "Unicode (UTF-8)"
+- :menuselection:`View-->Character Encoding-->Unicode (UTF-8)`
 
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 TkRat (GUI)
+***********
 
 Works.  Use "Insert file..." or external editor.
 
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Gmail (Web GUI)
+***************
 
 Does not work for sending patches.
 
@@ -295,5 +317,3 @@
 
 Another problem is that Gmail will base64-encode any message that has a
 non-ASCII character. That includes things like European names.
-
-                                ###
diff --git a/Documentation/filesystems/dax.txt b/Documentation/filesystems/dax.txt
index 0c16a22..23d18b8 100644
--- a/Documentation/filesystems/dax.txt
+++ b/Documentation/filesystems/dax.txt
@@ -123,9 +123,12 @@
 mapped caches such as ARM, MIPS and SPARC.
 
 Calling get_user_pages() on a range of user memory that has been mmaped
-from a DAX file will fail as there are no 'struct page' to describe
-those pages.  This problem is being worked on.  That means that O_DIRECT
-reads/writes to those memory ranges from a non-DAX file will fail (note
-that O_DIRECT reads/writes _of a DAX file_ do work, it is the memory
-that is being accessed that is key here).  Other things that will not
-work include RDMA, sendfile() and splice().
+from a DAX file will fail when there are no 'struct page' to describe
+those pages.  This problem has been addressed in some device drivers
+by adding optional struct page support for pages under the control of
+the driver (see CONFIG_NVDIMM_PFN in drivers/nvdimm for an example of
+how to do this). In the non struct page cases O_DIRECT reads/writes to
+those memory ranges from a non-DAX file will fail (note that O_DIRECT
+reads/writes _of a DAX file_ do work, it is the memory that is being
+accessed that is key here).  Other things that will not work in the
+non struct page case include RDMA, sendfile() and splice().
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 68080ad..fcc1ac0 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -145,7 +145,7 @@
 		symbol the task is blocked in - or "0" if not blocked.
  pagemap	Page table
  stack		Report full stack trace, enable via CONFIG_STACKTRACE
- smaps		a extension based on maps, showing the memory consumption of
+ smaps		an extension based on maps, showing the memory consumption of
 		each mapping and flags associated with it
  numa_maps	an extension based on maps, showing the memory locality and
 		binding policy as well as mem usage (in pages) of each mapping.
diff --git a/Documentation/gcov.txt b/Documentation/gcov.txt
deleted file mode 100644
index 7b72778..0000000
--- a/Documentation/gcov.txt
+++ /dev/null
@@ -1,257 +0,0 @@
-Using gcov with the Linux kernel
-================================
-
-1. Introduction
-2. Preparation
-3. Customization
-4. Files
-5. Modules
-6. Separated build and test machines
-7. Troubleshooting
-Appendix A: sample script: gather_on_build.sh
-Appendix B: sample script: gather_on_test.sh
-
-
-1. Introduction
-===============
-
-gcov profiling kernel support enables the use of GCC's coverage testing
-tool gcov [1] with the Linux kernel. Coverage data of a running kernel
-is exported in gcov-compatible format via the "gcov" debugfs directory.
-To get coverage data for a specific file, change to the kernel build
-directory and use gcov with the -o option as follows (requires root):
-
-# cd /tmp/linux-out
-# gcov -o /sys/kernel/debug/gcov/tmp/linux-out/kernel spinlock.c
-
-This will create source code files annotated with execution counts
-in the current directory. In addition, graphical gcov front-ends such
-as lcov [2] can be used to automate the process of collecting data
-for the entire kernel and provide coverage overviews in HTML format.
-
-Possible uses:
-
-* debugging (has this line been reached at all?)
-* test improvement (how do I change my test to cover these lines?)
-* minimizing kernel configurations (do I need this option if the
-  associated code is never run?)
-
---
-
-[1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html
-[2] http://ltp.sourceforge.net/coverage/lcov.php
-
-
-2. Preparation
-==============
-
-Configure the kernel with:
-
-        CONFIG_DEBUG_FS=y
-        CONFIG_GCOV_KERNEL=y
-
-select the gcc's gcov format, default is autodetect based on gcc version:
-
-        CONFIG_GCOV_FORMAT_AUTODETECT=y
-
-and to get coverage data for the entire kernel:
-
-        CONFIG_GCOV_PROFILE_ALL=y
-
-Note that kernels compiled with profiling flags will be significantly
-larger and run slower. Also CONFIG_GCOV_PROFILE_ALL may not be supported
-on all architectures.
-
-Profiling data will only become accessible once debugfs has been
-mounted:
-
-        mount -t debugfs none /sys/kernel/debug
-
-
-3. Customization
-================
-
-To enable profiling for specific files or directories, add a line
-similar to the following to the respective kernel Makefile:
-
-        For a single file (e.g. main.o):
-                GCOV_PROFILE_main.o := y
-
-        For all files in one directory:
-                GCOV_PROFILE := y
-
-To exclude files from being profiled even when CONFIG_GCOV_PROFILE_ALL
-is specified, use:
-
-                GCOV_PROFILE_main.o := n
-        and:
-                GCOV_PROFILE := n
-
-Only files which are linked to the main kernel image or are compiled as
-kernel modules are supported by this mechanism.
-
-
-4. Files
-========
-
-The gcov kernel support creates the following files in debugfs:
-
-        /sys/kernel/debug/gcov
-                Parent directory for all gcov-related files.
-
-        /sys/kernel/debug/gcov/reset
-                Global reset file: resets all coverage data to zero when
-                written to.
-
-        /sys/kernel/debug/gcov/path/to/compile/dir/file.gcda
-                The actual gcov data file as understood by the gcov
-                tool. Resets file coverage data to zero when written to.
-
-        /sys/kernel/debug/gcov/path/to/compile/dir/file.gcno
-                Symbolic link to a static data file required by the gcov
-                tool. This file is generated by gcc when compiling with
-                option -ftest-coverage.
-
-
-5. Modules
-==========
-
-Kernel modules may contain cleanup code which is only run during
-module unload time. The gcov mechanism provides a means to collect
-coverage data for such code by keeping a copy of the data associated
-with the unloaded module. This data remains available through debugfs.
-Once the module is loaded again, the associated coverage counters are
-initialized with the data from its previous instantiation.
-
-This behavior can be deactivated by specifying the gcov_persist kernel
-parameter:
-
-        gcov_persist=0
-
-At run-time, a user can also choose to discard data for an unloaded
-module by writing to its data file or the global reset file.
-
-
-6. Separated build and test machines
-====================================
-
-The gcov kernel profiling infrastructure is designed to work out-of-the
-box for setups where kernels are built and run on the same machine. In
-cases where the kernel runs on a separate machine, special preparations
-must be made, depending on where the gcov tool is used:
-
-a) gcov is run on the TEST machine
-
-The gcov tool version on the test machine must be compatible with the
-gcc version used for kernel build. Also the following files need to be
-copied from build to test machine:
-
-from the source tree:
-  - all C source files + headers
-
-from the build tree:
-  - all C source files + headers
-  - all .gcda and .gcno files
-  - all links to directories
-
-It is important to note that these files need to be placed into the
-exact same file system location on the test machine as on the build
-machine. If any of the path components is symbolic link, the actual
-directory needs to be used instead (due to make's CURDIR handling).
-
-b) gcov is run on the BUILD machine
-
-The following files need to be copied after each test case from test
-to build machine:
-
-from the gcov directory in sysfs:
-  - all .gcda files
-  - all links to .gcno files
-
-These files can be copied to any location on the build machine. gcov
-must then be called with the -o option pointing to that directory.
-
-Example directory setup on the build machine:
-
-  /tmp/linux:    kernel source tree
-  /tmp/out:      kernel build directory as specified by make O=
-  /tmp/coverage: location of the files copied from the test machine
-
-  [user@build] cd /tmp/out
-  [user@build] gcov -o /tmp/coverage/tmp/out/init main.c
-
-
-7. Troubleshooting
-==================
-
-Problem:  Compilation aborts during linker step.
-Cause:    Profiling flags are specified for source files which are not
-          linked to the main kernel or which are linked by a custom
-          linker procedure.
-Solution: Exclude affected source files from profiling by specifying
-          GCOV_PROFILE := n or GCOV_PROFILE_basename.o := n in the
-          corresponding Makefile.
-
-Problem:  Files copied from sysfs appear empty or incomplete.
-Cause:    Due to the way seq_file works, some tools such as cp or tar
-          may not correctly copy files from sysfs.
-Solution: Use 'cat' to read .gcda files and 'cp -d' to copy links.
-          Alternatively use the mechanism shown in Appendix B.
-
-
-Appendix A: gather_on_build.sh
-==============================
-
-Sample script to gather coverage meta files on the build machine
-(see 6a):
-#!/bin/bash
-
-KSRC=$1
-KOBJ=$2
-DEST=$3
-
-if [ -z "$KSRC" ] || [ -z "$KOBJ" ] || [ -z "$DEST" ]; then
-  echo "Usage: $0 <ksrc directory> <kobj directory> <output.tar.gz>" >&2
-  exit 1
-fi
-
-KSRC=$(cd $KSRC; printf "all:\n\t@echo \${CURDIR}\n" | make -f -)
-KOBJ=$(cd $KOBJ; printf "all:\n\t@echo \${CURDIR}\n" | make -f -)
-
-find $KSRC $KOBJ \( -name '*.gcno' -o -name '*.[ch]' -o -type l \) -a \
-                 -perm /u+r,g+r | tar cfz $DEST -P -T -
-
-if [ $? -eq 0 ] ; then
-  echo "$DEST successfully created, copy to test system and unpack with:"
-  echo "  tar xfz $DEST -P"
-else
-  echo "Could not create file $DEST"
-fi
-
-
-Appendix B: gather_on_test.sh
-=============================
-
-Sample script to gather coverage data files on the test machine
-(see 6b):
-
-#!/bin/bash -e
-
-DEST=$1
-GCDA=/sys/kernel/debug/gcov
-
-if [ -z "$DEST" ] ; then
-  echo "Usage: $0 <output.tar.gz>" >&2
-  exit 1
-fi
-
-TEMPDIR=$(mktemp -d)
-echo Collecting data..
-find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \;
-find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \;
-find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \;
-tar czf $DEST -C $TEMPDIR sys
-rm -rf $TEMPDIR
-
-echo "$DEST successfully created, copy to build system and unpack with:"
-echo "  tar xfz $DEST"
diff --git a/Documentation/gpu/conf.py b/Documentation/gpu/conf.py
new file mode 100644
index 0000000..6314d17
--- /dev/null
+++ b/Documentation/gpu/conf.py
@@ -0,0 +1,5 @@
+# -*- coding: utf-8; mode: python -*-
+
+project = "Linux GPU Driver Developer's Guide"
+
+tags.add("subproject")
diff --git a/Documentation/gpu/index.rst b/Documentation/gpu/index.rst
index fcac0fa..5ff3d2b 100644
--- a/Documentation/gpu/index.rst
+++ b/Documentation/gpu/index.rst
@@ -12,3 +12,10 @@
    drm-uapi
    i915
    vga-switcheroo
+
+.. only::  subproject
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/hsi.txt b/Documentation/hsi.txt
deleted file mode 100644
index 6ac6cd5..0000000
--- a/Documentation/hsi.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-HSI - High-speed Synchronous Serial Interface
-
-1. Introduction
-~~~~~~~~~~~~~~~
-
-High Speed Syncronous Interface (HSI) is a fullduplex, low latency protocol,
-that is optimized for die-level interconnect between an Application Processor
-and a Baseband chipset. It has been specified by the MIPI alliance in 2003 and
-implemented by multiple vendors since then.
-
-The HSI interface supports full duplex communication over multiple channels
-(typically 8) and is capable of reaching speeds up to 200 Mbit/s.
-
-The serial protocol uses two signals, DATA and FLAG as combined data and clock
-signals and an additional READY signal for flow control. An additional WAKE
-signal can be used to wakeup the chips from standby modes. The signals are
-commonly prefixed by AC for signals going from the application die to the
-cellular die and CA for signals going the other way around.
-
-+------------+                                 +---------------+
-|  Cellular  |                                 |  Application  |
-|    Die     |                                 |      Die      |
-|            | - - - - - - CAWAKE - - - - - - >|               |
-|           T|------------ CADATA ------------>|R              |
-|           X|------------ CAFLAG ------------>|X              |
-|            |<----------- ACREADY ------------|               |
-|            |                                 |               |
-|            |                                 |               |
-|            |< - - - - -  ACWAKE - - - - - - -|               |
-|           R|<----------- ACDATA -------------|T              |
-|           X|<----------- ACFLAG -------------|X              |
-|            |------------ CAREADY ----------->|               |
-|            |                                 |               |
-|            |                                 |               |
-+------------+                                 +---------------+
-
-2. HSI Subsystem in Linux
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-In the Linux kernel the hsi subsystem is supposed to be used for HSI devices.
-The hsi subsystem contains drivers for hsi controllers including support for
-multi-port controllers and provides a generic API for using the HSI ports.
-
-It also contains HSI client drivers, which make use of the generic API to
-implement a protocol used on the HSI interface. These client drivers can
-use an arbitrary number of channels.
-
-3. hsi-char Device
-~~~~~~~~~~~~~~~~~~
-
-Each port automatically registers a generic client driver called hsi_char,
-which provides a charecter device for userspace representing the HSI port.
-It can be used to communicate via HSI from userspace. Userspace may
-configure the hsi_char device using the following ioctl commands:
-
-* HSC_RESET:
- - flush the HSI port
-
-* HSC_SET_PM
- - enable or disable the client.
-
-* HSC_SEND_BREAK
- - send break
-
-* HSC_SET_RX
- - set RX configuration
-
-* HSC_GET_RX
- - get RX configuration
-
-* HSC_SET_TX
- - set TX configuration
-
-* HSC_GET_TX
- - get TX configuration
diff --git a/Documentation/iio/iio_configfs.txt b/Documentation/iio/iio_configfs.txt
index f0add35..4e5f101 100644
--- a/Documentation/iio/iio_configfs.txt
+++ b/Documentation/iio/iio_configfs.txt
@@ -82,8 +82,8 @@
 
 e.g:
 
-$ mkdir /config/triggers/hrtimer/instance1
-$ rmdir /config/triggers/hrtimer/instance1
+$ mkdir /config/iio/triggers/hrtimer/instance1
+$ rmdir /config/iio/triggers/hrtimer/instance1
 
 Each trigger can have one or more attributes specific to the trigger type.
 
diff --git a/Documentation/index.rst b/Documentation/index.rst
index e0fc729..d9ccb94 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -6,22 +6,19 @@
 Welcome to The Linux Kernel's documentation!
 ============================================
 
-Nothing for you to see here *yet*. Please move along.
-
 Contents:
 
 .. toctree::
    :maxdepth: 2
 
    kernel-documentation
-   media/media_uapi
-   media/media_kapi
-   media/dvb-drivers/index
-   media/v4l-drivers/index
+   development-process/index
+   dev-tools/tools
+   driver-api/index
+   media/index
    gpu/index
 
 Indices and tables
 ==================
 
 * :ref:`genindex`
-* :ref:`search`
diff --git a/Documentation/ioctl/botching-up-ioctls.txt b/Documentation/ioctl/botching-up-ioctls.txt
index cc30b14..36138c6 100644
--- a/Documentation/ioctl/botching-up-ioctls.txt
+++ b/Documentation/ioctl/botching-up-ioctls.txt
@@ -34,15 +34,18 @@
    64-bit platforms do. So we always need padding to the natural size to get
    this right.
 
- * Pad the entire struct to a multiple of 64-bits - the structure size will
-   otherwise differ on 32-bit versus 64-bit. Having a different structure size
-   hurts when passing arrays of structures to the kernel, or if the kernel
-   checks the structure size, which e.g. the drm core does.
+ * Pad the entire struct to a multiple of 64-bits if the structure contains
+   64-bit types - the structure size will otherwise differ on 32-bit versus
+   64-bit. Having a different structure size hurts when passing arrays of
+   structures to the kernel, or if the kernel checks the structure size, which
+   e.g. the drm core does.
 
  * Pointers are __u64, cast from/to a uintprt_t on the userspace side and
    from/to a void __user * in the kernel. Try really hard not to delay this
    conversion or worse, fiddle the raw __u64 through your code since that
-   diminishes the checking tools like sparse can provide.
+   diminishes the checking tools like sparse can provide. The macro
+   u64_to_user_ptr can be used in the kernel to avoid warnings about integers
+   and pointres of different sizes.
 
 
 Basics
diff --git a/Documentation/kasan.txt b/Documentation/kasan.txt
deleted file mode 100644
index 7dd95b3..0000000
--- a/Documentation/kasan.txt
+++ /dev/null
@@ -1,171 +0,0 @@
-KernelAddressSanitizer (KASAN)
-==============================
-
-0. Overview
-===========
-
-KernelAddressSANitizer (KASAN) is a dynamic memory error detector. It provides
-a fast and comprehensive solution for finding use-after-free and out-of-bounds
-bugs.
-
-KASAN uses compile-time instrumentation for checking every memory access,
-therefore you will need a GCC version 4.9.2 or later. GCC 5.0 or later is
-required for detection of out-of-bounds accesses to stack or global variables.
-
-Currently KASAN is supported only for x86_64 architecture.
-
-1. Usage
-========
-
-To enable KASAN configure kernel with:
-
-	  CONFIG_KASAN = y
-
-and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline and
-inline are compiler instrumentation types. The former produces smaller binary
-the latter is 1.1 - 2 times faster. Inline instrumentation requires a GCC
-version 5.0 or later.
-
-KASAN works with both SLUB and SLAB memory allocators.
-For better bug detection and nicer reporting, enable CONFIG_STACKTRACE.
-
-To disable instrumentation for specific files or directories, add a line
-similar to the following to the respective kernel Makefile:
-
-        For a single file (e.g. main.o):
-                KASAN_SANITIZE_main.o := n
-
-        For all files in one directory:
-                KASAN_SANITIZE := n
-
-1.1 Error reports
-=================
-
-A typical out of bounds access report looks like this:
-
-==================================================================
-BUG: AddressSanitizer: out of bounds access in kmalloc_oob_right+0x65/0x75 [test_kasan] at addr ffff8800693bc5d3
-Write of size 1 by task modprobe/1689
-=============================================================================
-BUG kmalloc-128 (Not tainted): kasan error
------------------------------------------------------------------------------
-
-Disabling lock debugging due to kernel taint
-INFO: Allocated in kmalloc_oob_right+0x3d/0x75 [test_kasan] age=0 cpu=0 pid=1689
- __slab_alloc+0x4b4/0x4f0
- kmem_cache_alloc_trace+0x10b/0x190
- kmalloc_oob_right+0x3d/0x75 [test_kasan]
- init_module+0x9/0x47 [test_kasan]
- do_one_initcall+0x99/0x200
- load_module+0x2cb3/0x3b20
- SyS_finit_module+0x76/0x80
- system_call_fastpath+0x12/0x17
-INFO: Slab 0xffffea0001a4ef00 objects=17 used=7 fp=0xffff8800693bd728 flags=0x100000000004080
-INFO: Object 0xffff8800693bc558 @offset=1368 fp=0xffff8800693bc720
-
-Bytes b4 ffff8800693bc548: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a  ........ZZZZZZZZ
-Object ffff8800693bc558: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
-Object ffff8800693bc568: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
-Object ffff8800693bc578: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
-Object ffff8800693bc588: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
-Object ffff8800693bc598: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
-Object ffff8800693bc5a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
-Object ffff8800693bc5b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
-Object ffff8800693bc5c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5  kkkkkkkkkkkkkkk.
-Redzone ffff8800693bc5d8: cc cc cc cc cc cc cc cc                          ........
-Padding ffff8800693bc718: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ
-CPU: 0 PID: 1689 Comm: modprobe Tainted: G    B          3.18.0-rc1-mm1+ #98
-Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
- ffff8800693bc000 0000000000000000 ffff8800693bc558 ffff88006923bb78
- ffffffff81cc68ae 00000000000000f3 ffff88006d407600 ffff88006923bba8
- ffffffff811fd848 ffff88006d407600 ffffea0001a4ef00 ffff8800693bc558
-Call Trace:
- [<ffffffff81cc68ae>] dump_stack+0x46/0x58
- [<ffffffff811fd848>] print_trailer+0xf8/0x160
- [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
- [<ffffffff811ff0f5>] object_err+0x35/0x40
- [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
- [<ffffffff8120b9fa>] kasan_report_error+0x38a/0x3f0
- [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
- [<ffffffff8120b344>] ? kasan_unpoison_shadow+0x14/0x40
- [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
- [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
- [<ffffffff8120a995>] __asan_store1+0x75/0xb0
- [<ffffffffa0002601>] ? kmem_cache_oob+0x1d/0xc3 [test_kasan]
- [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
- [<ffffffffa0002065>] kmalloc_oob_right+0x65/0x75 [test_kasan]
- [<ffffffffa00026b0>] init_module+0x9/0x47 [test_kasan]
- [<ffffffff810002d9>] do_one_initcall+0x99/0x200
- [<ffffffff811e4e5c>] ? __vunmap+0xec/0x160
- [<ffffffff81114f63>] load_module+0x2cb3/0x3b20
- [<ffffffff8110fd70>] ? m_show+0x240/0x240
- [<ffffffff81115f06>] SyS_finit_module+0x76/0x80
- [<ffffffff81cd3129>] system_call_fastpath+0x12/0x17
-Memory state around the buggy address:
- ffff8800693bc300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
- ffff8800693bc380: fc fc 00 00 00 00 00 00 00 00 00 00 00 00 00 fc
- ffff8800693bc400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
- ffff8800693bc480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
- ffff8800693bc500: fc fc fc fc fc fc fc fc fc fc fc 00 00 00 00 00
->ffff8800693bc580: 00 00 00 00 00 00 00 00 00 00 03 fc fc fc fc fc
-                                                 ^
- ffff8800693bc600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
- ffff8800693bc680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
- ffff8800693bc700: fc fc fc fc fb fb fb fb fb fb fb fb fb fb fb fb
- ffff8800693bc780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
- ffff8800693bc800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
-==================================================================
-
-The header of the report discribe what kind of bug happened and what kind of
-access caused it. It's followed by the description of the accessed slub object
-(see 'SLUB Debug output' section in Documentation/vm/slub.txt for details) and
-the description of the accessed memory page.
-
-In the last section the report shows memory state around the accessed address.
-Reading this part requires some understanding of how KASAN works.
-
-The state of each 8 aligned bytes of memory is encoded in one shadow byte.
-Those 8 bytes can be accessible, partially accessible, freed or be a redzone.
-We use the following encoding for each shadow byte: 0 means that all 8 bytes
-of the corresponding memory region are accessible; number N (1 <= N <= 7) means
-that the first N bytes are accessible, and other (8 - N) bytes are not;
-any negative value indicates that the entire 8-byte word is inaccessible.
-We use different negative values to distinguish between different kinds of
-inaccessible memory like redzones or freed memory (see mm/kasan/kasan.h).
-
-In the report above the arrows point to the shadow byte 03, which means that
-the accessed address is partially accessible.
-
-
-2. Implementation details
-=========================
-
-From a high level, our approach to memory error detection is similar to that
-of kmemcheck: use shadow memory to record whether each byte of memory is safe
-to access, and use compile-time instrumentation to check shadow memory on each
-memory access.
-
-AddressSanitizer dedicates 1/8 of kernel memory to its shadow memory
-(e.g. 16TB to cover 128TB on x86_64) and uses direct mapping with a scale and
-offset to translate a memory address to its corresponding shadow address.
-
-Here is the function which translates an address to its corresponding shadow
-address:
-
-static inline void *kasan_mem_to_shadow(const void *addr)
-{
-	return ((unsigned long)addr >> KASAN_SHADOW_SCALE_SHIFT)
-		+ KASAN_SHADOW_OFFSET;
-}
-
-where KASAN_SHADOW_SCALE_SHIFT = 3.
-
-Compile-time instrumentation used for checking memory accesses. Compiler inserts
-function calls (__asan_load*(addr), __asan_store*(addr)) before each memory
-access of size 1, 2, 4, 8 or 16. These functions check whether memory access is
-valid or not by checking corresponding shadow memory.
-
-GCC 5.0 has possibility to perform inline instrumentation. Instead of making
-function calls GCC directly inserts the code to check the shadow memory.
-This option significantly enlarges kernel but it gives x1.1-x2 performance
-boost over outline instrumented kernel.
diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt
index db10185..069fcb3 100644
--- a/Documentation/kbuild/kconfig-language.txt
+++ b/Documentation/kbuild/kconfig-language.txt
@@ -274,7 +274,44 @@
 
 This is similar to the simple config entry above, but it also gives a
 hint to front ends, that all suboptions should be displayed as a
-separate list of options.
+separate list of options. To make sure all the suboptions will really
+show up under the menuconfig entry and not outside of it, every item
+from the <config options> list must depend on the menuconfig symbol.
+In practice, this is achieved by using one of the next two constructs:
+
+(1):
+menuconfig M
+if M
+    config C1
+    config C2
+endif
+
+(2):
+menuconfig M
+config C1
+    depends on M
+config C2
+    depends on M
+
+In the following examples (3) and (4), C1 and C2 still have the M
+dependency, but will not appear under menuconfig M anymore, because
+of C0, which doesn't depend on M:
+
+(3):
+menuconfig M
+    config C0
+if M
+    config C1
+    config C2
+endif
+
+(4):
+menuconfig M
+config C0
+config C1
+    depends on M
+config C2
+    depends on M
 
 choices:
 
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 88ff63d..b0eb27b 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -393,6 +393,15 @@
 * We generally don' have to bring up a SMP kernel just to capture the
   dump. Hence generally it is useful either to build a UP dump-capture
   kernel or specify maxcpus=1 option while loading dump-capture kernel.
+  Note, though maxcpus always works, you had better replace it with
+  nr_cpus to save memory if supported by the current ARCH, such as x86.
+
+* You should enable multi-cpu support in dump-capture kernel if you intend
+  to use multi-thread programs with it, such as parallel dump feature of
+  makedumpfile. Otherwise, the multi-thread program may have a great
+  performance degradation. To enable multi-cpu support, you should bring up an
+  SMP dump-capture kernel and specify maxcpus/nr_cpus, disable_cpu_apicid=[X]
+  options while loading it.
 
 * For s390x there are two kdump modes: If a ELF header is specified with
   the elfcorehdr= kernel parameter, it is used by the kdump kernel as it
diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt
index 1dafc52..05a7857 100644
--- a/Documentation/kernel-docs.txt
+++ b/Documentation/kernel-docs.txt
@@ -1,731 +1,652 @@
+.. _kernel_docs:
 
-    Index of Documentation for People Interested in Writing and/or
-
-                   Understanding the Linux Kernel.
+Index of Documentation for People Interested in Writing and/or Understanding the Linux Kernel
+=============================================================================================
 
           Juan-Mariano de Goyeneche <jmseyas@dit.upm.es>
 
-/*
- * The latest version of this document may be found at:
- *   http://www.dit.upm.es/~jmseyas/linux/kernel/hackers-docs.html
- */
+The need for a document like this one became apparent in the
+linux-kernel mailing list as the same questions, asking for pointers
+to information, appeared again and again.
 
-   The need for a document like this one became apparent in the
-   linux-kernel mailing list as the same questions, asking for pointers
-   to information, appeared again and again.
-   
-   Fortunately, as more and more people get to GNU/Linux, more and more
-   get interested in the Kernel. But reading the sources is not always
-   enough. It is easy to understand the code, but miss the concepts, the
-   philosophy and design decisions behind this code.
-   
-   Unfortunately, not many documents are available for beginners to
-   start. And, even if they exist, there was no "well-known" place which
-   kept track of them. These lines try to cover this lack. All documents
-   available on line known by the author are listed, while some reference
-   books are also mentioned.
-   
-   PLEASE, if you know any paper not listed here or write a new document,
-   send me an e-mail, and I'll include a reference to it here. Any
-   corrections, ideas or comments are also welcomed.
-   
-   The papers that follow are listed in no particular order. All are
-   cataloged with the following fields: the document's "Title", the
-   "Author"/s, the "URL" where they can be found, some "Keywords" helpful
-   when searching for specific topics, and a brief "Description" of the
-   Document.
-   
-   Enjoy!
-   
-     ON-LINE DOCS:
-       
-     * Title: "Linux Device Drivers, Third Edition"
-       Author: Jonathan Corbet, Alessandro Rubini, Greg Kroah-Hartman
-       URL: http://lwn.net/Kernel/LDD3/
-       Description: A 600-page book covering the (2.6.10) driver
-       programming API and kernel hacking in general.  Available under the
-       Creative Commons Attribution-ShareAlike 2.0 license.
+Fortunately, as more and more people get to GNU/Linux, more and more
+get interested in the Kernel. But reading the sources is not always
+enough. It is easy to understand the code, but miss the concepts, the
+philosophy and design decisions behind this code.
 
-     * Title: "The Linux Kernel"
-       Author: David A. Rusling.
-       URL: http://www.tldp.org/LDP/tlk/tlk.html
-       Keywords: everything!, book.
-       Description: On line, 200 pages book describing most aspects of
-       the Linux Kernel. Probably, the first reference for beginners.
-       Lots of illustrations explaining data structures use and
-       relationships in the purest Richard W. Stevens' style. Contents:
-       "1.-Hardware Basics, 2.-Software Basics, 3.-Memory Management,
-       4.-Processes, 5.-Interprocess Communication Mechanisms, 6.-PCI,
-       7.-Interrupts and Interrupt Handling, 8.-Device Drivers, 9.-The
-       File system, 10.-Networks, 11.-Kernel Mechanisms, 12.-Modules,
-       13.-The Linux Kernel Sources, A.-Linux Data Structures, B.-The
-       Alpha AXP Processor, C.-Useful Web and FTP Sites, D.-The GNU
-       General Public License, Glossary". In short: a must have.
+Unfortunately, not many documents are available for beginners to
+start. And, even if they exist, there was no "well-known" place which
+kept track of them. These lines try to cover this lack. All documents
+available on line known by the author are listed, while some reference
+books are also mentioned.
 
-     * Title: "Linux Device Drivers, 2nd Edition"
-       Author: Alessandro Rubini and Jonathan Corbet.
-       URL: http://www.xml.com/ldd/chapter/book/index.html
-       Keywords: device drivers, modules, debugging, memory, hardware,
-       interrupt handling, char drivers, block drivers, kmod, mmap, DMA,
-       buses.
-       Description: O'Reilly's popular book, now also on-line under the
-       GNU Free Documentation License.
-       Notes: You can also buy it in paper-form from O'Reilly. See below
-       under BOOKS (Not on-line).
+PLEASE, if you know any paper not listed here or write a new document,
+send me an e-mail, and I'll include a reference to it here. Any
+corrections, ideas or comments are also welcomed.
 
-     * Title: "Conceptual Architecture of the Linux Kernel"
-       Author: Ivan T. Bowman.
-       URL: http://plg.uwaterloo.ca/
-       Keywords: conceptual software architecture, extracted design,
-       reverse engineering, system structure.
-       Description: Conceptual software architecture of the Linux kernel,
-       automatically extracted from the source code. Very detailed. Good
-       figures. Gives good overall kernel understanding.
+The papers that follow are listed in no particular order. All are
+cataloged with the following fields: the document's "Title", the
+"Author"/s, the "URL" where they can be found, some "Keywords" helpful
+when searching for specific topics, and a brief "Description" of the
+Document.
 
-     * Title: "Concrete Architecture of the Linux Kernel"
-       Author: Ivan T. Bowman, Saheem Siddiqi, and Meyer C. Tanuan.
-       URL: http://plg.uwaterloo.ca/
-       Keywords: concrete architecture, extracted design, reverse
-       engineering, system structure, dependencies.
-       Description: Concrete architecture of the Linux kernel,
-       automatically extracted from the source code. Very detailed. Good
-       figures. Gives good overall kernel understanding. This papers
-       focus on lower details than its predecessor (files, variables...).
+Enjoy!
 
-     * Title: "Linux as a Case Study: Its Extracted Software
-       Architecture"
-       Author: Ivan T. Bowman, Richard C. Holt and Neil V. Brewster.
-       URL: http://plg.uwaterloo.ca/
-       Keywords: software architecture, architecture recovery,
-       redocumentation.
-       Description: Paper appeared at ICSE'99, Los Angeles, May 16-22,
-       1999. A mixture of the previous two documents from the same
-       author.
+.. note::
 
-     * Title: "Overview of the Virtual File System"
-       Author: Richard Gooch.
-       URL: http://www.mjmwired.net/kernel/Documentation/filesystems/vfs.txt
-       Keywords: VFS, File System, mounting filesystems, opening files,
-       dentries, dcache.
-       Description: Brief introduction to the Linux Virtual File System.
-       What is it, how it works, operations taken when opening a file or
-       mounting a file system and description of important data
-       structures explaining the purpose of each of their entries.
+   The documents on each section of this document are ordered by its
+   published date, from the newest to the oldest.
 
-     * Title: "The Linux RAID-1, 4, 5 Code"
-       Author: Ingo Molnar, Gadi Oxman and Miguel de Icaza.
-       URL: http://www.linuxjournal.com/article.php?sid=2391
-       Keywords: RAID, MD driver.
-       Description: Linux Journal Kernel Korner article. Here is its
-       abstract: "A description of the implementation of the RAID-1,
-       RAID-4 and RAID-5 personalities of the MD device driver in the
-       Linux kernel, providing users with high performance and reliable,
-       secondary-storage capability using software".
+Docs at the Linux Kernel tree
+-----------------------------
 
-     * Title: "Dynamic Kernels: Modularized Device Drivers"
-       Author: Alessandro Rubini.
-       URL: http://www.linuxjournal.com/article.php?sid=1219
-       Keywords: device driver, module, loading/unloading modules,
-       allocating resources.
-       Description: Linux Journal Kernel Korner article. Here is its
-       abstract: "This is the first of a series of four articles
-       co-authored by Alessandro Rubini and Georg Zezchwitz which present
-       a practical approach to writing Linux device drivers as kernel
-       loadable modules. This installment presents an introduction to the
-       topic, preparing the reader to understand next month's
-       installment".
+The DocBook books should be built with ``make {htmldocs | psdocs | pdfdocs}``.
+The Sphinx books should be built with ``make {htmldocs | pdfdocs | epubdocs}``.
 
-     * Title: "Dynamic Kernels: Discovery"
-       Author: Alessandro Rubini.
-       URL: http://www.linuxjournal.com/article.php?sid=1220
-       Keywords: character driver, init_module, clean_up module,
-       autodetection, mayor number, minor number, file operations,
-       open(), close().
-       Description: Linux Journal Kernel Korner article. Here is its
-       abstract: "This article, the second of four, introduces part of
-       the actual code to create custom module implementing a character
-       device driver. It describes the code for module initialization and
-       cleanup, as well as the open() and close() system calls".
+    * Name: **linux/Documentation**
 
-     * Title: "The Devil's in the Details"
-       Author: Georg v. Zezschwitz and Alessandro Rubini.
-       URL: http://www.linuxjournal.com/article.php?sid=1221
-       Keywords: read(), write(), select(), ioctl(), blocking/non
-       blocking mode, interrupt handler.
-       Description: Linux Journal Kernel Korner article. Here is its
-       abstract: "This article, the third of four on writing character
-       device drivers, introduces concepts of reading, writing, and using
-       ioctl-calls".
+      :Author: Many.
+      :Location: Documentation/
+      :Keywords: text files, Sphinx, DocBook.
+      :Description: Documentation that comes with the kernel sources,
+        inside the Documentation directory. Some pages from this document
+        (including this document itself) have been moved there, and might
+        be more up to date than the web version.
 
-     * Title: "Dissecting Interrupts and Browsing DMA"
-       Author: Alessandro Rubini and Georg v. Zezschwitz.
-       URL: http://www.linuxjournal.com/article.php?sid=1222
-       Keywords: interrupts, irqs, DMA, bottom halves, task queues.
-       Description: Linux Journal Kernel Korner article. Here is its
-       abstract: "This is the fourth in a series of articles about
-       writing character device drivers as loadable kernel modules. This
-       month, we further investigate the field of interrupt handling.
-       Though it is conceptually simple, practical limitations and
-       constraints make this an ``interesting'' part of device driver
-       writing, and several different facilities have been provided for
-       different situations. We also investigate the complex topic of
-       DMA".
+    * Title: **The Kernel Hacking HOWTO**
 
-     * Title: "Device Drivers Concluded"
-       Author: Georg v. Zezschwitz.
-       URL: http://www.linuxjournal.com/article.php?sid=1287
-       Keywords: address spaces, pages, pagination, page management,
-       demand loading, swapping, memory protection, memory mapping, mmap,
-       virtual memory areas (VMAs), vremap, PCI.
-       Description: Finally, the above turned out into a five articles
-       series. This latest one's introduction reads: "This is the last of
-       five articles about character device drivers. In this final
-       section, Georg deals with memory mapping devices, beginning with
-       an overall description of the Linux memory management concepts".
+      :Author: Various Talented People, and Rusty.
+      :Location: Documentation/DocBook/kernel-hacking.tmpl
+      :Keywords: HOWTO, kernel contexts, deadlock, locking, modules,
+        symbols, return conventions.
+      :Description: From the Introduction: "Please understand that I
+        never wanted to write this document, being grossly underqualified,
+        but I always wanted to read it, and this was the only way. I
+        simply explain some best practices, and give reading entry-points
+        into the kernel sources. I avoid implementation details: that's
+        what the code is for, and I ignore whole tracts of useful
+        routines. This document assumes familiarity with C, and an
+        understanding of what the kernel is, and how it is used. It was
+        originally written for the 2.3 kernels, but nearly all of it
+        applies to 2.2 too; 2.0 is slightly different".
 
-     * Title: "Network Buffers And Memory Management"
-       Author: Alan Cox.
-       URL: http://www.linuxjournal.com/article.php?sid=1312
-       Keywords: sk_buffs, network devices, protocol/link layer
-       variables, network devices flags, transmit, receive,
-       configuration, multicast.
-       Description: Linux Journal Kernel Korner. Here is the abstract:
-       "Writing a network device driver for Linux is fundamentally
-       simple---most of the complexity (other than talking to the
-       hardware) involves managing network packets in memory".
-       
-     * Title: "Linux Kernel Hackers' Guide"
-       Author: Michael K. Johnson.
-       URL: http://www.tldp.org/LDP/khg/HyperNews/get/khg.html
-       Keywords: device drivers, files, VFS, kernel interface, character vs
-       block devices, hardware interrupts, scsi, DMA, access to user memory,
-       memory allocation, timers.
-       Description: A guide designed to help you get up to speed on the
-       concepts that are not intuitevly obvious, and to document the internal
-       structures of Linux.
-       
-     * Title: "The Venus kernel interface"
-       Author: Peter J. Braam.
-       URL:
-       http://www.coda.cs.cmu.edu/doc/html/kernel-venus-protocol.html
-       Keywords: coda, filesystem, venus, cache manager.
-       Description: "This document describes the communication between
-       Venus and kernel level file system code needed for the operation
-       of the Coda filesystem. This version document is meant to describe
-       the current interface (version 1.0) as well as improvements we
-       envisage".
+    * Title: **Linux Kernel Locking HOWTO**
 
-     * Title: "Programming PCI-Devices under Linux"
-       Author: Claus Schroeter.
-       URL:
-       ftp://ftp.llp.fu-berlin.de/pub/linux/LINUX-LAB/whitepapers/pcip.ps.gz
-       Keywords: PCI, device, busmastering.
-       Description: 6 pages tutorial on PCI programming under Linux.
-       Gives the basic concepts on the architecture of the PCI subsystem,
-       as long as basic functions and macros to read/write the devices
-       and perform busmastering.
+      :Author: Various Talented People, and Rusty.
+      :Location: Documentation/DocBook/kernel-locking.tmpl
+      :Keywords: locks, locking, spinlock, semaphore, atomic, race
+        condition, bottom halves, tasklets, softirqs.
+      :Description: The title says it all: document describing the
+        locking system in the Linux Kernel either in uniprocessor or SMP
+        systems.
+      :Notes: "It was originally written for the later (>2.3.47) 2.3
+        kernels, but most of it applies to 2.2 too; 2.0 is slightly
+        different". Freely redistributable under the conditions of the GNU
+        General Public License.
 
-     * Title: "Writing Character Device Driver for Linux"
-       Author: R. Baruch and C. Schroeter.
-       URL:
-       ftp://ftp.llp.fu-berlin.de/pub/linux/LINUX-LAB/whitepapers/drivers.ps.gz
-       Keywords: character device drivers, I/O, signals, DMA, accessing
-       ports in user space, kernel environment.
-       Description: 68 pages paper on writing character drivers. A little
-       bit old (1.993, 1.994) although still useful.
+On-line docs
+------------
 
-     * Title: "Design and Implementation of the Second Extended
-       Filesystem"
-       Author: Rémy Card, Theodore Ts'o, Stephen Tweedie.
-       URL: http://web.mit.edu/tytso/www/linux/ext2intro.html
-       Keywords: ext2, linux fs history, inode, directory, link, devices,
-       VFS, physical structure, performance, benchmarks, ext2fs library,
-       ext2fs tools, e2fsck.
-       Description: Paper written by three of the top ext2 hackers.
-       Covers Linux filesystems history, ext2 motivation, ext2 features,
-       design, physical structure on disk, performance, benchmarks,
-       e2fsck's passes description... A must read!
-       Notes: This paper was first published in the Proceedings of the
-       First Dutch International Symposium on Linux, ISBN 90-367-0385-9.
+    * Title: **Linux Kernel Mailing List Glossary**
 
-     * Title: "Analysis of the Ext2fs structure"
-       Author: Louis-Dominique Dubeau.
-       URL: http://teaching.csse.uwa.edu.au/units/CITS2002/fs-ext2/
-       Keywords: ext2, filesystem, ext2fs.
-       Description: Description of ext2's blocks, directories, inodes,
-       bitmaps, invariants...
+      :Author: various
+      :URL: http://kernelnewbies.org/glossary/
+      :Date: rolling version
+      :Keywords: glossary, terms, linux-kernel.
+      :Description: From the introduction: "This glossary is intended as
+        a brief description of some of the acronyms and terms you may hear
+        during discussion of the Linux kernel".
 
-     * Title: "Journaling the Linux ext2fs Filesystem"
-       Author: Stephen C. Tweedie.
-       URL:
-       ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/journal-design.ps.gz
-       Keywords: ext3, journaling.
-       Description: Excellent 8-pages paper explaining the journaling
-       capabilities added to ext2 by the author, showing different
-       problems faced and the alternatives chosen.
+    * Title: **Tracing the Way of Data in a TCP Connection through the Linux Kernel**
 
-     * Title: "Kernel API changes from 2.0 to 2.2"
-       Author: Richard Gooch.
-       URL: http://www.safe-mbox.com/~rgooch/linux/docs/porting-to-2.2.html
-       Keywords: 2.2, changes.
-       Description: Kernel functions/structures/variables which changed
-       from 2.0.x to 2.2.x.
+      :Author: Richard Sailer
+      :URL: https://archive.org/details/linux_kernel_data_flow_short_paper
+      :Date: 2016
+      :Keywords: Linux Kernel Networking, TCP, tracing, ftrace
+      :Description: A seminar paper explaining ftrace and how to use it for
+        understanding linux kernel internals,
+        illustrated at tracing the way of a TCP packet through the kernel.
+      :Abstract: *This short paper outlines the usage of ftrace a tracing framework
+        as a tool to understand a running Linux system.
+        Having obtained a trace-log a kernel hacker can read and understand
+        source code more determined and with context.
+        In a detailed example this approach is demonstrated in tracing
+        and the way of data in a TCP Connection through the kernel.
+        Finally this trace-log is used as base for more a exact conceptual
+        exploration and description of the Linux TCP/IP implementation.*
 
-     * Title: "Kernel API changes from 2.2 to 2.4"
-       Author: Richard Gooch.
-       URL: http://www.safe-mbox.com/~rgooch/linux/docs/porting-to-2.4.html
-       Keywords: 2.4, changes.
-       Description: Kernel functions/structures/variables which changed
-       from 2.2.x to 2.4.x.
-       
-     * Title: "Linux Kernel Module Programming Guide"
-       Author: Ori Pomerantz.
-       URL: http://tldp.org/LDP/lkmpg/2.6/html/index.html
-       Keywords: modules, GPL book, /proc, ioctls, system calls,
-       interrupt handlers .
-       Description: Very nice 92 pages GPL book on the topic of modules
-       programming. Lots of examples.
-       
-     * Title: "I/O Event Handling Under Linux"
-       Author: Richard Gooch.
-       Keywords: IO, I/O, select(2), poll(2), FDs, aio_read(2), readiness
-       event queues.
-       Description: From the Introduction: "I/O Event handling is about
-       how your Operating System allows you to manage a large number of
-       open files (file descriptors in UNIX/POSIX, or FDs) in your
-       application. You want the OS to notify you when FDs become active
-       (have data ready to be read or are ready for writing). Ideally you
-       want a mechanism that is scalable. This means a large number of
-       inactive FDs cost very little in memory and CPU time to manage".
-       
-     * Title: "The Kernel Hacking HOWTO"
-       Author: Various Talented People, and Rusty.
-       Location: in kernel tree, Documentation/DocBook/kernel-hacking.tmpl
-       (must be built as "make {htmldocs | psdocs | pdfdocs})
-       Keywords: HOWTO, kernel contexts, deadlock, locking, modules,
-       symbols, return conventions.
-       Description: From the Introduction: "Please understand that I
-       never wanted to write this document, being grossly underqualified,
-       but I always wanted to read it, and this was the only way. I
-       simply explain some best practices, and give reading entry-points
-       into the kernel sources. I avoid implementation details: that's
-       what the code is for, and I ignore whole tracts of useful
-       routines. This document assumes familiarity with C, and an
-       understanding of what the kernel is, and how it is used. It was
-       originally written for the 2.3 kernels, but nearly all of it
-       applies to 2.2 too; 2.0 is slightly different".
-       
-     * Title: "Writing an ALSA Driver"
-       Author: Takashi Iwai <tiwai@suse.de>
-       URL: http://www.alsa-project.org/~iwai/writing-an-alsa-driver/index.html
-       Keywords: ALSA, sound, soundcard, driver, lowlevel, hardware.
-       Description: Advanced Linux Sound Architecture for developers,
-       both at kernel and user-level sides. ALSA is the Linux kernel
-       sound architecture in the 2.6 kernel version.
-       
-     * Title: "Programming Guide for Linux USB Device Drivers"
-       Author: Detlef Fliegl.
-       URL: http://usb.in.tum.de/usbdoc/
-       Keywords: USB, universal serial bus.
-       Description: A must-read. From the Preface: "This document should
-       give detailed information about the current state of the USB
-       subsystem and its API for USB device drivers. The first section
-       will deal with the basics of USB devices. You will learn about
-       different types of devices and their properties. Going into detail
-       you will see how USB devices communicate on the bus. The second
-       section gives an overview of the Linux USB subsystem [2] and the
-       device driver framework. Then the API and its data structures will
-       be explained step by step. The last section of this document
-       contains a reference of all API calls and their return codes".
-       Notes: Beware: the main page states: "This document may not be
-       published, printed or used in excerpts without explicit permission
-       of the author". Fortunately, it may still be read...
+    * Title: **On submitting kernel Patches**
 
-     * Title: "Linux Kernel Mailing List Glossary"
-       Author: various
-       URL: http://kernelnewbies.org/glossary/
-       Keywords: glossary, terms, linux-kernel.
-       Description: From the introduction: "This glossary is intended as
-       a brief description of some of the acronyms and terms you may hear
-       during discussion of the Linux kernel".
-       
-     * Title: "Linux Kernel Locking HOWTO"
-       Author: Various Talented People, and Rusty.
-       Location: in kernel tree, Documentation/DocBook/kernel-locking.tmpl
-       (must be built as "make {htmldocs | psdocs | pdfdocs})
-       Keywords: locks, locking, spinlock, semaphore, atomic, race
-       condition, bottom halves, tasklets, softirqs.
-       Description: The title says it all: document describing the
-       locking system in the Linux Kernel either in uniprocessor or SMP
-       systems.
-       Notes: "It was originally written for the later (>2.3.47) 2.3
-       kernels, but most of it applies to 2.2 too; 2.0 is slightly
-       different". Freely redistributable under the conditions of the GNU
-       General Public License.
+      :Author: Andi Kleen
+      :URL: http://halobates.de/on-submitting-kernel-patches.pdf
+      :Date: 2008
+      :Keywords: patches, review process, types of submissions, basic rules, case studies
+      :Description: This paper gives several experience values on what types of patches
+        there are and how likley they get merged.
+      :Abstract:
+        [...]. This paper examines some common problems for
+        submitting larger changes and some strategies to avoid problems.
 
-     * Title: "Global spinlock list and usage"
-       Author: Rick Lindsley.
-       URL: http://lse.sourceforge.net/lockhier/global-spin-lock
-       Keywords: spinlock.
-       Description: This is an attempt to document both the existence and
-       usage of the spinlocks in the Linux 2.4.5 kernel. Comprehensive
-       list of spinlocks showing when they are used, which functions
-       access them, how each lock is acquired, under what conditions it
-       is held, whether interrupts can occur or not while it is held...
+    * Title: **Overview of the Virtual File System**
 
-     * Title: "Porting Linux 2.0 Drivers To Linux 2.2: Changes and New
-       Features "
-       Author: Alan Cox.
-       URL: http://www.linux-mag.com/1999-05/gear_01.html
-       Keywords: ports, porting.
-       Description: Article from Linux Magazine on porting from 2.0 to
-       2.2 kernels.
+      :Author: Richard Gooch.
+      :URL: http://www.mjmwired.net/kernel/Documentation/filesystems/vfs.txt
+      :Date: 2007
+      :Keywords: VFS, File System, mounting filesystems, opening files,
+        dentries, dcache.
+      :Description: Brief introduction to the Linux Virtual File System.
+        What is it, how it works, operations taken when opening a file or
+        mounting a file system and description of important data
+        structures explaining the purpose of each of their entries.
 
-     * Title: "Porting Device Drivers To Linux 2.2: part II"
-       Author: Alan Cox.
-       URL: http://www.linux-mag.com/id/238 
-       Keywords: ports, porting.
-       Description: Second part on porting from 2.0 to 2.2 kernels.
+    * Title: **Linux Device Drivers, Third Edition**
 
-     * Title: "How To Make Sure Your Driver Will Work On The Power
-       Macintosh"
-       Author: Paul Mackerras.
-       URL: http://www.linux-mag.com/id/261
-       Keywords: Mac, Power Macintosh, porting, drivers, compatibility.
-       Description: The title says it all.
+      :Author: Jonathan Corbet, Alessandro Rubini, Greg Kroah-Hartman
+      :URL: http://lwn.net/Kernel/LDD3/
+      :Date: 2005
+      :Description: A 600-page book covering the (2.6.10) driver
+        programming API and kernel hacking in general.  Available under the
+        Creative Commons Attribution-ShareAlike 2.0 license.
+      :note: You can also :ref:`purchase a copy from O'Reilly or elsewhere  <ldd3_published>`.
 
-     * Title: "An Introduction to SCSI Drivers"
-       Author: Alan Cox.
-       URL: http://www.linux-mag.com/id/284
-       Keywords: SCSI, device, driver.
-       Description: The title says it all.
+    * Title: **Writing an ALSA Driver**
 
-     * Title: "Advanced SCSI Drivers And Other Tales"
-       Author: Alan Cox.
-       URL: http://www.linux-mag.com/id/307
-       Keywords: SCSI, device, driver, advanced.
-       Description: The title says it all.
+      :Author: Takashi Iwai <tiwai@suse.de>
+      :URL: http://www.alsa-project.org/~iwai/writing-an-alsa-driver/index.html
+      :Date: 2005
+      :Keywords: ALSA, sound, soundcard, driver, lowlevel, hardware.
+      :Description: Advanced Linux Sound Architecture for developers,
+        both at kernel and user-level sides. ALSA is the Linux kernel
+        sound architecture in the 2.6 kernel version.
 
-     * Title: "Writing Linux Mouse Drivers"
-       Author: Alan Cox.
-       URL: http://www.linux-mag.com/id/330
-       Keywords: mouse, driver, gpm.
-       Description: The title says it all.
+    * Title: **Linux PCMCIA Programmer's Guide**
 
-     * Title: "More on Mouse Drivers"
-       Author: Alan Cox.
-       URL: http://www.linux-mag.com/id/356
-       Keywords: mouse, driver, gpm, races, asynchronous I/O.
-       Description: The title still says it all.
+      :Author: David Hinds.
+      :URL: http://pcmcia-cs.sourceforge.net/ftp/doc/PCMCIA-PROG.html
+      :Date: 2003
+      :Keywords: PCMCIA.
+      :Description: "This document describes how to write kernel device
+        drivers for the Linux PCMCIA Card Services interface. It also
+        describes how to write user-mode utilities for communicating with
+        Card Services.
 
-     * Title: "Writing Video4linux Radio Driver"
-       Author: Alan Cox.
-       URL: http://www.linux-mag.com/id/381
-       Keywords: video4linux, driver, radio, radio devices.
-       Description: The title says it all.
+    * Title: **Linux Kernel Module Programming Guide**
 
-     * Title: "Video4linux Drivers, Part 1: Video-Capture Device"
-       Author: Alan Cox.
-       URL: http://www.linux-mag.com/id/406
-       Keywords: video4linux, driver, video capture, capture devices,
-       camera driver.
-       Description: The title says it all.
+      :Author: Ori Pomerantz.
+      :URL: http://tldp.org/LDP/lkmpg/2.6/html/index.html
+      :Date: 2001
+      :Keywords: modules, GPL book, /proc, ioctls, system calls,
+        interrupt handlers .
+      :Description: Very nice 92 pages GPL book on the topic of modules
+        programming. Lots of examples.
 
-     * Title: "Video4linux Drivers, Part 2: Video-capture Devices"
-       Author: Alan Cox.
-       URL: http://www.linux-mag.com/id/429
-       Keywords: video4linux, driver, video capture, capture devices,
-       camera driver, control, query capabilities, capability, facility.
-       Description: The title says it all.
+    * Title: **Global spinlock list and usage**
 
-     * Title: "PCI Management in Linux 2.2"
-       Author: Alan Cox.
-       URL: http://www.linux-mag.com/id/452
-       Keywords: PCI, bus, bus-mastering.
-       Description: The title says it all.
+      :Author: Rick Lindsley.
+      :URL: http://lse.sourceforge.net/lockhier/global-spin-lock
+      :Date: 2001
+      :Keywords: spinlock.
+      :Description: This is an attempt to document both the existence and
+        usage of the spinlocks in the Linux 2.4.5 kernel. Comprehensive
+        list of spinlocks showing when they are used, which functions
+        access them, how each lock is acquired, under what conditions it
+        is held, whether interrupts can occur or not while it is held...
 
-     * Title: "Linux 2.4 Kernel Internals"
-       Author: Tigran Aivazian and Christoph Hellwig.
-       URL: http://www.moses.uklinux.net/patches/lki.html
-       Keywords: Linux, kernel, booting, SMB boot, VFS, page cache.
-       Description: A little book used for a short training course.
-       Covers building the kernel image, booting (including SMP bootup),
-       process management, VFS and more.
+    * Title: **A Linux vm README**
 
-     * Title: "Linux IP Networking. A Guide to the Implementation and
-       Modification of the Linux Protocol Stack."
-       Author: Glenn Herrin.
-       URL: http://www.cs.unh.edu/cnrg/gherrin
-       Keywords: network, networking, protocol, IP, UDP, TCP, connection,
-       socket, receiving, transmitting, forwarding, routing, packets,
-       modules, /proc, sk_buff, FIB, tags.
-       Description: Excellent paper devoted to the Linux IP Networking,
-       explaining anything from the kernel's to the user space
-       configuration tools' code. Very good to get a general overview of
-       the kernel networking implementation and understand all steps
-       packets follow from the time they are received at the network
-       device till they are delivered to applications. The studied kernel
-       code is from 2.2.14 version. Provides code for a working packet
-       dropper example.
-       
-     * Title: "Get those boards talking under Linux."
-       Author: Alex Ivchenko.
-       URL: http://www.edn.com/article/CA46968.html
-       Keywords: data-acquisition boards, drivers, modules, interrupts,
-       memory allocation.
-       Description: Article written for people wishing to make their data
-       acquisition boards work on their GNU/Linux machines. Gives a basic
-       overview on writing drivers, from the naming of functions to
-       interrupt handling.
-       Notes: Two-parts article. Part II is at
-       URL: http://www.edn.com/article/CA46998.html
-       
-     * Title: "Linux PCMCIA Programmer's Guide"
-       Author: David Hinds.
-       URL: http://pcmcia-cs.sourceforge.net/ftp/doc/PCMCIA-PROG.html
-       Keywords: PCMCIA.
-       Description: "This document describes how to write kernel device
-       drivers for the Linux PCMCIA Card Services interface. It also
-       describes how to write user-mode utilities for communicating with
-       Card Services.
+      :Author: Kanoj Sarcar.
+      :URL: http://kos.enix.org/pub/linux-vmm.html
+      :Date: 2001
+      :Keywords: virtual memory, mm, pgd, vma, page, page flags, page
+        cache, swap cache, kswapd.
+      :Description: Telegraphic, short descriptions and definitions
+        relating the Linux virtual memory implementation.
 
-     * Title: "The Linux Kernel NFSD Implementation"
-       Author: Neil Brown.
-       URL:
-       http://www.cse.unsw.edu.au/~neilb/oss/linux-commentary/nfsd.html
-       Keywords: knfsd, nfsd, NFS, RPC, lockd, mountd, statd.
-       Description: The title says it all.
-       Notes: Covers knfsd's version 1.4.7 (patch against 2.2.7 kernel).
-       
-     * Title: "A Linux vm README"
-       Author: Kanoj Sarcar.
-       URL: http://kos.enix.org/pub/linux-vmm.html
-       Keywords: virtual memory, mm, pgd, vma, page, page flags, page
-       cache, swap cache, kswapd.
-       Description: Telegraphic, short descriptions and definitions
-       relating the Linux virtual memory implementation.
-       
-     * Title: "(nearly) Complete Linux Loadable Kernel Modules. The
-       definitive guide for hackers, virus coders and system
-       administrators."
-       Author: pragmatic/THC.
-       URL: http://packetstormsecurity.org/docs/hack/LKM_HACKING.html
-       Keywords: syscalls, intercept, hide, abuse, symbol table.
-       Description: Interesting paper on how to abuse the Linux kernel in
-       order to intercept and modify syscalls, make
-       files/directories/processes invisible, become root, hijack ttys,
-       write kernel modules based virus... and solutions for admins to
-       avoid all those abuses.
-       Notes: For 2.0.x kernels. Gives guidances to port it to 2.2.x
-       kernels.
-       
-     BOOKS: (Not on-line)
-   
-     * Title: "Linux Device Drivers"
-       Author: Alessandro Rubini.
-       Publisher: O'Reilly & Associates.
-       Date: 1998.
-       Pages: 439.
-       ISBN: 1-56592-292-1
-       
-     * Title: "Linux Device Drivers, 2nd Edition"
-       Author: Alessandro Rubini and Jonathan Corbet.
-       Publisher: O'Reilly & Associates.
-       Date: 2001.
-       Pages: 586.
-       ISBN: 0-59600-008-1
-       Notes: Further information in
-       http://www.oreilly.com/catalog/linuxdrive2/
+    * Title: **Video4linux Drivers, Part 1: Video-Capture Device**
 
-     * Title: "Linux Device Drivers, 3rd Edition"
-       Authors: Jonathan Corbet, Alessandro Rubini, and Greg Kroah-Hartman
-       Publisher: O'Reilly & Associates.
-       Date: 2005.
-       Pages: 636.
-       ISBN: 0-596-00590-3
-       Notes: Further information in
-       http://www.oreilly.com/catalog/linuxdrive3/
-       PDF format, URL: http://lwn.net/Kernel/LDD3/
+      :Author: Alan Cox.
+      :URL: http://www.linux-mag.com/id/406
+      :Date: 2000
+      :Keywords: video4linux, driver, video capture, capture devices,
+        camera driver.
+      :Description: The title says it all.
 
-     * Title: "Linux Kernel Internals"
-       Author: Michael Beck.
-       Publisher: Addison-Wesley.
-       Date: 1997.
-       ISBN: 0-201-33143-8 (second edition)
-       
-     * Title: "The Design of the UNIX Operating System"
-       Author: Maurice J. Bach.
-       Publisher: Prentice Hall.
-       Date: 1986.
-       Pages: 471.
-       ISBN: 0-13-201757-1
-       
-     * Title: "The Design and Implementation of the 4.3 BSD UNIX
-       Operating System"
-       Author: Samuel J. Leffler, Marshall Kirk McKusick, Michael J.
-       Karels, John S. Quarterman.
-       Publisher: Addison-Wesley.
-       Date: 1989 (reprinted with corrections on October, 1990).
-       ISBN: 0-201-06196-1
-       
-     * Title: "The Design and Implementation of the 4.4 BSD UNIX
-       Operating System"
-       Author: Marshall Kirk McKusick, Keith Bostic, Michael J. Karels,
-       John S. Quarterman.
-       Publisher: Addison-Wesley.
-       Date: 1996.
-       ISBN: 0-201-54979-4
-       
-     * Title: "Programmation Linux 2.0 API systeme et fonctionnement du
-       noyau"
-       Author: Remy Card, Eric Dumas, Franck Mevel.
-       Publisher: Eyrolles.
-       Date: 1997.
-       Pages: 520.
-       ISBN: 2-212-08932-5
-       Notes: French.
+    * Title: **Video4linux Drivers, Part 2: Video-capture Devices**
 
-     * Title: "Unix internals -- the new frontiers"
-       Author: Uresh Vahalia.
-       Publisher: Prentice Hall.
-       Date: 1996.
-       Pages: 600.
-       ISBN: 0-13-101908-2
+      :Author: Alan Cox.
+      :URL: http://www.linux-mag.com/id/429
+      :Date: 2000
+      :Keywords: video4linux, driver, video capture, capture devices,
+        camera driver, control, query capabilities, capability, facility.
+      :Description: The title says it all.
 
-     * Title: "Programming for the real world - POSIX.4"
-       Author: Bill O. Gallmeister.
-       Publisher: O'Reilly & Associates, Inc..
-       Date: 1995.
-       Pages: ???.
-       ISBN: I-56592-074-0
-       Notes: Though not being directly about Linux, Linux aims to be
-       POSIX. Good reference.
+    * Title: **Linux IP Networking. A Guide to the Implementation and Modification of the Linux Protocol Stack.**
 
-     * Title:  "UNIX  Systems  for  Modern Architectures: Symmetric
-       Multiprocessing and Caching for Kernel Programmers"
-       Author: Curt Schimmel.
-       Publisher: Addison Wesley.
-       Date: June, 1994.
-       Pages: 432.
-       ISBN: 0-201-63338-8
+      :Author: Glenn Herrin.
+      :URL: http://www.cs.unh.edu/cnrg/gherrin
+      :Date: 2000
+      :Keywords: network, networking, protocol, IP, UDP, TCP, connection,
+        socket, receiving, transmitting, forwarding, routing, packets,
+        modules, /proc, sk_buff, FIB, tags.
+      :Description: Excellent paper devoted to the Linux IP Networking,
+        explaining anything from the kernel's to the user space
+        configuration tools' code. Very good to get a general overview of
+        the kernel networking implementation and understand all steps
+        packets follow from the time they are received at the network
+        device till they are delivered to applications. The studied kernel
+        code is from 2.2.14 version. Provides code for a working packet
+        dropper example.
 
-     * Title: "Linux Kernel Development, 3rd Edition"
-       Author: Robert Love
-       Publisher: Addison-Wesley.
-       Date: July, 2010
-       Pages: 440
-       ISBN: 978-0672329463
+    * Title: **How To Make Sure Your Driver Will Work On The Power Macintosh**
 
-     MISCELLANEOUS:
+      :Author: Paul Mackerras.
+      :URL: http://www.linux-mag.com/id/261
+      :Date: 1999
+      :Keywords: Mac, Power Macintosh, porting, drivers, compatibility.
+      :Description: The title says it all.
 
-     * Name: linux/Documentation
-       Author: Many.
-       URL: Just look inside your kernel sources.
-       Keywords: anything, DocBook.
-       Description: Documentation that comes with the kernel sources,
-       inside the Documentation directory. Some pages from this document
-       (including this document itself) have been moved there, and might
-       be more up to date than the web version.
+    * Title: **An Introduction to SCSI Drivers**
 
-     * Name: "Linux Kernel Source Reference"
-       Author: Thomas Graichen.
-       URL: http://marc.info/?l=linux-kernel&m=96446640102205&w=4
-       Keywords: CVS, web, cvsweb, browsing source code.
-       Description: Web interface to a CVS server with the kernel
-       sources. "Here you can have a look at any file of the Linux kernel
-       sources of any version starting from 1.0 up to the (daily updated)
-       current version available. Also you can check the differences
-       between two versions of a file".
+      :Author: Alan Cox.
+      :URL: http://www.linux-mag.com/id/284
+      :Date: 1999
+      :Keywords: SCSI, device, driver.
+      :Description: The title says it all.
 
-     * Name: "Cross-Referencing Linux"
-       URL: http://lxr.free-electrons.com/
-       Keywords: Browsing source code.
-       Description: Another web-based Linux kernel source code browser.
-       Lots of cross references to variables and functions. You can see
-       where they are defined and where they are used.
+    * Title: **Advanced SCSI Drivers And Other Tales**
 
-     * Name: "Linux Weekly News"
-       URL: http://lwn.net
-       Keywords: latest kernel news.
-       Description: The title says it all. There's a fixed kernel section
-       summarizing developers' work, bug fixes, new features and versions
-       produced during the week. Published every Thursday.
+      :Author: Alan Cox.
+      :URL: http://www.linux-mag.com/id/307
+      :Date: 1999
+      :Keywords: SCSI, device, driver, advanced.
+      :Description: The title says it all.
 
-     * Name: "Kernel Traffic"
-       URL: http://kt.earth.li/kernel-traffic/index.html
-       Keywords: linux-kernel mailing list, weekly kernel news.
-       Description: Weekly newsletter covering the most relevant
-       discussions of the linux-kernel mailing list.
+    * Title: **Writing Linux Mouse Drivers**
 
-     * Name: "CuTTiNG.eDGe.LiNuX"
-       URL: http://edge.kernelnotes.org
-       Keywords: changelist.
-       Description: Site which provides the changelist for every kernel
-       release. What's new, what's better, what's changed. Myrdraal reads
-       the patches and describes them. Pointers to the patches are there,
-       too.
+      :Author: Alan Cox.
+      :URL: http://www.linux-mag.com/id/330
+      :Date: 1999
+      :Keywords: mouse, driver, gpm.
+      :Description: The title says it all.
 
-     * Name: "New linux-kernel Mailing List FAQ"
-       URL: http://www.tux.org/lkml/
-       Keywords: linux-kernel mailing list FAQ.
-       Description: linux-kernel is a mailing list for developers to
-       communicate. This FAQ builds on the previous linux-kernel mailing
-       list FAQ maintained by Frohwalt Egerer, who no longer maintains
-       it. Read it to see how to join the mailing list. Dozens of
-       interesting questions regarding the list, Linux, developers (who
-       is ...?), terms (what is...?) are answered here too. Just read it.
+    * Title: **More on Mouse Drivers**
 
-     * Name: "Linux Virtual File System"
-       Author: Peter J. Braam.
-       URL: http://www.coda.cs.cmu.edu/doc/talks/linuxvfs/
-       Keywords: slides, VFS, inode, superblock, dentry, dcache.
-       Description: Set of slides, presumably from a presentation on the
-       Linux VFS layer. Covers version 2.1.x, with dentries and the
-       dcache.
+      :Author: Alan Cox.
+      :URL: http://www.linux-mag.com/id/356
+      :Date: 1999
+      :Keywords: mouse, driver, gpm, races, asynchronous I/O.
+      :Description: The title still says it all.
 
-     * Name: "Gary's Encyclopedia - The Linux Kernel"
-       Author: Gary (I suppose...).
-       URL: http://slencyclopedia.berlios.de/index.html
-       Keywords: linux, community, everything!
-       Description: Gary's Encyclopedia exists to allow the rapid finding
-       of documentation and other information of interest to GNU/Linux
-       users. It has about 4000 links to external pages in 150 major
-       categories. This link is for kernel-specific links, documents,
-       sites...  This list is now hosted by developer.Berlios.de,
-       but seems not to have been updated since sometime in 1999.
+    * Title: **Writing Video4linux Radio Driver**
 
-     * Name: "The home page of Linux-MM"
-       Author: The Linux-MM team.
-       URL: http://linux-mm.org/
-       Keywords: memory management, Linux-MM, mm patches, TODO, docs,
-       mailing list.
-       Description: Site devoted to Linux Memory Management development.
-       Memory related patches, HOWTOs, links, mm developers... Don't miss
-       it if you are interested in memory management development!
+      :Author: Alan Cox.
+      :URL: http://www.linux-mag.com/id/381
+      :Date: 1999
+      :Keywords: video4linux, driver, radio, radio devices.
+      :Description: The title says it all.
 
-     * Name: "Kernel Newbies IRC Channel and Website"
-       URL: http://www.kernelnewbies.org
-       Keywords: IRC, newbies, channel, asking doubts.
-       Description: #kernelnewbies on irc.oftc.net.
-       #kernelnewbies is an IRC network dedicated to the 'newbie'
-       kernel hacker. The audience mostly consists of people who are
-       learning about the kernel, working on kernel projects or
-       professional kernel hackers that want to help less seasoned kernel
-       people.
-       #kernelnewbies is on the OFTC IRC Network.
-       Try irc.oftc.net as your server and then /join #kernelnewbies.
-       The kernelnewbies website also hosts articles, documents, FAQs...
-       
-     * Name: "linux-kernel mailing list archives and search engines"
-       URL: http://vger.kernel.org/vger-lists.html
-       URL: http://www.uwsg.indiana.edu/hypermail/linux/kernel/index.html
-       URL: http://marc.theaimsgroup.com/?l=linux-kernel
-       URL: http://groups.google.com/group/mlist.linux.kernel
-       URL: http://www.cs.helsinki.fi/linux/linux-kernel/
-       URL: http://www.lib.uaa.alaska.edu/linux-kernel/
-       Keywords: linux-kernel, archives, search.
-       Description: Some of the linux-kernel mailing list archivers. If
-       you have a better/another one, please let me know.
-     _________________________________________________________________
-   
-   Document last updated on Sat 2005-NOV-19
+    * Title: **I/O Event Handling Under Linux**
+
+      :Author: Richard Gooch.
+      :URL: http://web.mit.edu/~yandros/doc/io-events.html
+      :Date: 1999
+      :Keywords: IO, I/O, select(2), poll(2), FDs, aio_read(2), readiness
+        event queues.
+      :Description: From the Introduction: "I/O Event handling is about
+        how your Operating System allows you to manage a large number of
+        open files (file descriptors in UNIX/POSIX, or FDs) in your
+        application. You want the OS to notify you when FDs become active
+        (have data ready to be read or are ready for writing). Ideally you
+        want a mechanism that is scalable. This means a large number of
+        inactive FDs cost very little in memory and CPU time to manage".
+
+    * Title: **(nearly) Complete Linux Loadable Kernel Modules. The definitive guide for hackers, virus coders and system administrators.**
+
+      :Author: pragmatic/THC.
+      :URL: http://packetstormsecurity.org/docs/hack/LKM_HACKING.html
+      :Date: 1999
+      :Keywords: syscalls, intercept, hide, abuse, symbol table.
+      :Description: Interesting paper on how to abuse the Linux kernel in
+        order to intercept and modify syscalls, make
+        files/directories/processes invisible, become root, hijack ttys,
+        write kernel modules based virus... and solutions for admins to
+        avoid all those abuses.
+      :Notes: For 2.0.x kernels. Gives guidances to port it to 2.2.x
+        kernels.
+
+    * Name: **Linux Virtual File System**
+
+      :Author: Peter J. Braam.
+      :URL: http://www.coda.cs.cmu.edu/doc/talks/linuxvfs/
+      :Date: 1998
+      :Keywords: slides, VFS, inode, superblock, dentry, dcache.
+      :Description: Set of slides, presumably from a presentation on the
+        Linux VFS layer. Covers version 2.1.x, with dentries and the
+        dcache.
+
+    * Title: **The Venus kernel interface**
+
+      :Author: Peter J. Braam.
+      :URL: http://www.coda.cs.cmu.edu/doc/html/kernel-venus-protocol.html
+      :Date: 1998
+      :Keywords: coda, filesystem, venus, cache manager.
+      :Description: "This document describes the communication between
+        Venus and kernel level file system code needed for the operation
+        of the Coda filesystem. This version document is meant to describe
+        the current interface (version 1.0) as well as improvements we
+        envisage".
+
+    * Title: **Design and Implementation of the Second Extended Filesystem**
+
+      :Author: Rémy Card, Theodore Ts'o, Stephen Tweedie.
+      :URL: http://web.mit.edu/tytso/www/linux/ext2intro.html
+      :Date: 1998
+      :Keywords: ext2, linux fs history, inode, directory, link, devices,
+        VFS, physical structure, performance, benchmarks, ext2fs library,
+        ext2fs tools, e2fsck.
+      :Description: Paper written by three of the top ext2 hackers.
+        Covers Linux filesystems history, ext2 motivation, ext2 features,
+        design, physical structure on disk, performance, benchmarks,
+        e2fsck's passes description... A must read!
+      :Notes: This paper was first published in the Proceedings of the
+        First Dutch International Symposium on Linux, ISBN 90-367-0385-9.
+
+    * Title: **The Linux RAID-1, 4, 5 Code**
+
+      :Author: Ingo Molnar, Gadi Oxman and Miguel de Icaza.
+      :URL: http://www.linuxjournal.com/article.php?sid=2391
+      :Date: 1997
+      :Keywords: RAID, MD driver.
+      :Description: Linux Journal Kernel Korner article. Here is its
+      :Abstract: *A description of the implementation of the RAID-1,
+        RAID-4 and RAID-5 personalities of the MD device driver in the
+        Linux kernel, providing users with high performance and reliable,
+        secondary-storage capability using software*.
+
+    * Title: **Linux Kernel Hackers' Guide**
+
+      :Author: Michael K. Johnson.
+      :URL: http://www.tldp.org/LDP/khg/HyperNews/get/khg.html
+      :Date: 1997
+      :Keywords: device drivers, files, VFS, kernel interface, character vs
+        block devices, hardware interrupts, scsi, DMA, access to user memory,
+        memory allocation, timers.
+      :Description: A guide designed to help you get up to speed on the
+        concepts that are not intuitevly obvious, and to document the internal
+        structures of Linux.
+
+    * Title: **Dynamic Kernels: Modularized Device Drivers**
+
+      :Author: Alessandro Rubini.
+      :URL: http://www.linuxjournal.com/article.php?sid=1219
+      :Date: 1996
+      :Keywords: device driver, module, loading/unloading modules,
+        allocating resources.
+      :Description: Linux Journal Kernel Korner article. Here is its
+      :Abstract: *This is the first of a series of four articles
+        co-authored by Alessandro Rubini and Georg Zezchwitz which present
+        a practical approach to writing Linux device drivers as kernel
+        loadable modules. This installment presents an introduction to the
+        topic, preparing the reader to understand next month's
+        installment*.
+
+    * Title: **Dynamic Kernels: Discovery**
+
+      :Author: Alessandro Rubini.
+      :URL: http://www.linuxjournal.com/article.php?sid=1220
+      :Date: 1996
+      :Keywords: character driver, init_module, clean_up module,
+        autodetection, mayor number, minor number, file operations,
+        open(), close().
+      :Description: Linux Journal Kernel Korner article. Here is its
+      :Abstract: *This article, the second of four, introduces part of
+        the actual code to create custom module implementing a character
+        device driver. It describes the code for module initialization and
+        cleanup, as well as the open() and close() system calls*.
+
+    * Title: **The Devil's in the Details**
+
+      :Author: Georg v. Zezschwitz and Alessandro Rubini.
+      :URL: http://www.linuxjournal.com/article.php?sid=1221
+      :Date: 1996
+      :Keywords: read(), write(), select(), ioctl(), blocking/non
+        blocking mode, interrupt handler.
+      :Description: Linux Journal Kernel Korner article. Here is its
+      :Abstract: *This article, the third of four on writing character
+        device drivers, introduces concepts of reading, writing, and using
+        ioctl-calls*.
+
+    * Title: **Dissecting Interrupts and Browsing DMA**
+
+      :Author: Alessandro Rubini and Georg v. Zezschwitz.
+      :URL: http://www.linuxjournal.com/article.php?sid=1222
+      :Date: 1996
+      :Keywords: interrupts, irqs, DMA, bottom halves, task queues.
+      :Description: Linux Journal Kernel Korner article. Here is its
+      :Abstract: *This is the fourth in a series of articles about
+        writing character device drivers as loadable kernel modules. This
+        month, we further investigate the field of interrupt handling.
+        Though it is conceptually simple, practical limitations and
+        constraints make this an ''interesting'' part of device driver
+        writing, and several different facilities have been provided for
+        different situations. We also investigate the complex topic of
+        DMA*.
+
+    * Title: **Device Drivers Concluded**
+
+      :Author: Georg v. Zezschwitz.
+      :URL: http://www.linuxjournal.com/article.php?sid=1287
+      :Date: 1996
+      :Keywords: address spaces, pages, pagination, page management,
+        demand loading, swapping, memory protection, memory mapping, mmap,
+        virtual memory areas (VMAs), vremap, PCI.
+      :Description: Finally, the above turned out into a five articles
+        series. This latest one's introduction reads: "This is the last of
+        five articles about character device drivers. In this final
+        section, Georg deals with memory mapping devices, beginning with
+        an overall description of the Linux memory management concepts".
+
+    * Title: **Network Buffers And Memory Management**
+
+      :Author: Alan Cox.
+      :URL: http://www.linuxjournal.com/article.php?sid=1312
+      :Date: 1996
+      :Keywords: sk_buffs, network devices, protocol/link layer
+        variables, network devices flags, transmit, receive,
+        configuration, multicast.
+      :Description: Linux Journal Kernel Korner.
+      :Abstract: *Writing a network device driver for Linux is fundamentally
+        simple---most of the complexity (other than talking to the
+        hardware) involves managing network packets in memory*.
+
+    * Title: **Analysis of the Ext2fs structure**
+
+      :Author: Louis-Dominique Dubeau.
+      :URL: http://teaching.csse.uwa.edu.au/units/CITS2002/fs-ext2/
+      :Date: 1994
+      :Keywords: ext2, filesystem, ext2fs.
+      :Description: Description of ext2's blocks, directories, inodes,
+        bitmaps, invariants...
+
+Published books
+---------------
+
+    * Title: **Linux Treiber entwickeln**
+
+      :Author: Jürgen Quade, Eva-Katharina Kunst
+      :Publisher: dpunkt.verlag
+      :Date: Oct 2015 (4th edition)
+      :Pages: 688
+      :ISBN: 978-3-86490-288-8
+      :Note: German. The third edition from 2011 is
+         much cheaper and still quite up-to-date.
+
+    * Title: **Linux Kernel Networking: Implementation and Theory**
+
+      :Author: Rami Rosen
+      :Publisher: Apress
+      :Date: December 22, 2013
+      :Pages: 648
+      :ISBN: 978-1430261964
+
+    * Title: **Embedded Linux Primer: A practical Real-World Approach, 2nd Edition**
+
+      :Author: Christopher Hallinan
+      :Publisher: Pearson
+      :Date: November, 2010
+      :Pages: 656
+      :ISBN: 978-0137017836
+
+    * Title: **Linux Kernel Development, 3rd Edition**
+
+      :Author: Robert Love
+      :Publisher: Addison-Wesley
+      :Date: July, 2010
+      :Pages: 440
+      :ISBN: 978-0672329463
+
+    * Title: **Essential Linux Device Drivers**
+
+      :Author: Sreekrishnan Venkateswaran
+      :Published: Prentice Hall
+      :Date: April, 2008
+      :Pages: 744
+      :ISBN: 978-0132396554
+
+.. _ldd3_published:
+
+    * Title: **Linux Device Drivers, 3rd Edition**
+
+      :Authors: Jonathan Corbet, Alessandro Rubini, and Greg Kroah-Hartman
+      :Publisher: O'Reilly & Associates
+      :Date: 2005
+      :Pages: 636
+      :ISBN: 0-596-00590-3
+      :Notes: Further information in
+        http://www.oreilly.com/catalog/linuxdrive3/
+        PDF format, URL: http://lwn.net/Kernel/LDD3/
+
+    * Title: **Linux Kernel Internals**
+
+      :Author: Michael Beck
+      :Publisher: Addison-Wesley
+      :Date: 1997
+      :ISBN: 0-201-33143-8 (second edition)
+
+    * Title: **Programmation Linux 2.0 API systeme et fonctionnement du noyau**
+
+      :Author: Remy Card, Eric Dumas, Franck Mevel
+      :Publisher: Eyrolles
+      :Date: 1997
+      :Pages: 520
+      :ISBN: 2-212-08932-5
+      :Notes: French
+
+    * Title: **The Design and Implementation of the 4.4 BSD UNIX Operating System**
+
+      :Author: Marshall Kirk McKusick, Keith Bostic, Michael J. Karels,
+        John S. Quarterman
+      :Publisher: Addison-Wesley
+      :Date: 1996
+      :ISBN: 0-201-54979-4
+
+    * Title: **Unix internals -- the new frontiers**
+
+      :Author: Uresh Vahalia
+      :Publisher: Prentice Hall
+      :Date: 1996
+      :Pages: 600
+      :ISBN: 0-13-101908-2
+
+    * Title: **Programming for the real world - POSIX.4**
+
+      :Author: Bill O. Gallmeister
+      :Publisher: O'Reilly & Associates, Inc
+      :Date: 1995
+      :Pages: 552
+      :ISBN: I-56592-074-0
+      :Notes: Though not being directly about Linux, Linux aims to be
+        POSIX. Good reference.
+
+    * Title:  **UNIX  Systems  for  Modern Architectures: Symmetric Multiprocessing and Caching for Kernel Programmers**
+
+      :Author: Curt Schimmel
+      :Publisher: Addison Wesley
+      :Date: June, 1994
+      :Pages: 432
+      :ISBN: 0-201-63338-8
+
+    * Title: **The Design and Implementation of the 4.3 BSD UNIX Operating System**
+
+      :Author: Samuel J. Leffler, Marshall Kirk McKusick, Michael J
+        Karels, John S. Quarterman
+      :Publisher: Addison-Wesley
+      :Date: 1989 (reprinted with corrections on October, 1990)
+      :ISBN: 0-201-06196-1
+
+    * Title: **The Design of the UNIX Operating System**
+
+      :Author: Maurice J. Bach
+      :Publisher: Prentice Hall
+      :Date: 1986
+      :Pages: 471
+      :ISBN: 0-13-201757-1
+
+Miscellaneous
+-------------
+
+    * Name: **Cross-Referencing Linux**
+
+      :URL: http://lxr.free-electrons.com/
+      :Keywords: Browsing source code.
+      :Description: Another web-based Linux kernel source code browser.
+        Lots of cross references to variables and functions. You can see
+        where they are defined and where they are used.
+
+    * Name: **Linux Weekly News**
+
+      :URL: http://lwn.net
+      :Keywords: latest kernel news.
+      :Description: The title says it all. There's a fixed kernel section
+        summarizing developers' work, bug fixes, new features and versions
+        produced during the week. Published every Thursday.
+
+    * Name: **The home page of Linux-MM**
+
+      :Author: The Linux-MM team.
+      :URL: http://linux-mm.org/
+      :Keywords: memory management, Linux-MM, mm patches, TODO, docs,
+        mailing list.
+      :Description: Site devoted to Linux Memory Management development.
+        Memory related patches, HOWTOs, links, mm developers... Don't miss
+        it if you are interested in memory management development!
+
+    * Name: **Kernel Newbies IRC Channel and Website**
+
+      :URL: http://www.kernelnewbies.org
+      :Keywords: IRC, newbies, channel, asking doubts.
+      :Description: #kernelnewbies on irc.oftc.net.
+        #kernelnewbies is an IRC network dedicated to the 'newbie'
+        kernel hacker. The audience mostly consists of people who are
+        learning about the kernel, working on kernel projects or
+        professional kernel hackers that want to help less seasoned kernel
+        people.
+        #kernelnewbies is on the OFTC IRC Network.
+        Try irc.oftc.net as your server and then /join #kernelnewbies.
+        The kernelnewbies website also hosts articles, documents, FAQs...
+
+    * Name: **linux-kernel mailing list archives and search engines**
+
+      :URL: http://vger.kernel.org/vger-lists.html
+      :URL: http://www.uwsg.indiana.edu/hypermail/linux/kernel/index.html
+      :URL: http://groups.google.com/group/mlist.linux.kernel
+      :Keywords: linux-kernel, archives, search.
+      :Description: Some of the linux-kernel mailing list archivers. If
+        you have a better/another one, please let me know.
+
+-------
+
+Document last updated on Tue 2016-Sep-20
+
+This document is based on:
+ http://www.dit.upm.es/~jmseyas/linux/kernel/hackers-docs.html
diff --git a/Documentation/kernel-documentation.rst b/Documentation/kernel-documentation.rst
index 391decc..10cc7dd 100644
--- a/Documentation/kernel-documentation.rst
+++ b/Documentation/kernel-documentation.rst
@@ -107,6 +107,35 @@
   the order as encountered."), having the higher levels the same overall makes
   it easier to follow the documents.
 
+
+the C domain
+------------
+
+The `Sphinx C Domain`_ (name c) is suited for documentation of C API. E.g. a
+function prototype:
+
+.. code-block:: rst
+
+    .. c:function:: int ioctl( int fd, int request )
+
+The C domain of the kernel-doc has some additional features. E.g. you can
+*rename* the reference name of a function with a common name like ``open`` or
+``ioctl``:
+
+.. code-block:: rst
+
+     .. c:function:: int ioctl( int fd, int request )
+        :name: VIDIOC_LOG_STATUS
+
+The func-name (e.g. ioctl) remains in the output but the ref-name changed from
+``ioctl`` to ``VIDIOC_LOG_STATUS``. The index entry for this function is also
+changed to ``VIDIOC_LOG_STATUS`` and the function can now referenced by:
+
+.. code-block:: rst
+
+     :c:func:`VIDIOC_LOG_STATUS`
+
+
 list tables
 -----------
 
@@ -265,6 +294,8 @@
 ``scripts/kernel-doc`` script to extract the documentation comments from the
 source.
 
+.. _kernel_doc:
+
 Writing kernel-doc comments
 ===========================
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 01085cd..fcf05a0 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1698,7 +1698,7 @@
 
 	intel_idle.max_cstate=	[KNL,HW,ACPI,X86]
 			0	disables intel_idle and fall back on acpi_idle.
-			1 to 6	specify maximum depth of C-state.
+			1 to 9	specify maximum depth of C-state.
 
 	intel_pstate=  [X86]
 		       disable
@@ -2171,10 +2171,13 @@
 			than or equal to this physical address is ignored.
 
 	maxcpus=	[SMP] Maximum number of processors that	an SMP kernel
-			should make use of.  maxcpus=n : n >= 0 limits the
-			kernel to using 'n' processors.  n=0 is a special case,
-			it is equivalent to "nosmp", which also disables
-			the IO APIC.
+			will bring up during bootup.  maxcpus=n : n >= 0 limits
+			the kernel to bring up 'n' processors. Surely after
+			bootup you can bring up the other plugged cpu by executing
+			"echo 1 > /sys/devices/system/cpu/cpuX/online". So maxcpus
+			only takes effect during system bootup.
+			While n=0 is a special case, it is equivalent to "nosmp",
+			which also disables the IO APIC.
 
 	max_loop=	[LOOP] The number of loop block devices that get
 	(loop.max_loop)	unconditionally pre-created at init time. The default
@@ -2581,8 +2584,6 @@
 
 	nodelayacct	[KNL] Disable per-task delay accounting
 
-	nodisconnect	[HW,SCSI,M68K] Disables SCSI disconnects.
-
 	nodsp		[SH] Disable hardware DSP at boot time.
 
 	noefi		Disable EFI runtime services support.
@@ -2783,9 +2784,12 @@
 
 	nr_cpus=	[SMP] Maximum number of processors that	an SMP kernel
 			could support.  nr_cpus=n : n >= 1 limits the kernel to
-			supporting 'n' processors. Later in runtime you can not
-			use hotplug cpu feature to put more cpu back to online.
-			just like you compile the kernel NR_CPUS=n
+			support 'n' processors. It could be larger than the
+			number of already plugged CPU during bootup, later in
+			runtime you can physically add extra cpu until it reaches
+			n. So during boot up some boot time memory for per-cpu
+			variables need be pre-allocated for later physical cpu
+			hot plugging.
 
 	nr_uarts=	[SERIAL] maximum number of UARTs to be registered.
 
diff --git a/Documentation/kmemcheck.txt b/Documentation/kmemcheck.txt
deleted file mode 100644
index 80aae85..0000000
--- a/Documentation/kmemcheck.txt
+++ /dev/null
@@ -1,754 +0,0 @@
-GETTING STARTED WITH KMEMCHECK
-==============================
-
-Vegard Nossum <vegardno@ifi.uio.no>
-
-
-Contents
-========
-0. Introduction
-1. Downloading
-2. Configuring and compiling
-3. How to use
-3.1. Booting
-3.2. Run-time enable/disable
-3.3. Debugging
-3.4. Annotating false positives
-4. Reporting errors
-5. Technical description
-
-
-0. Introduction
-===============
-
-kmemcheck is a debugging feature for the Linux Kernel. More specifically, it
-is a dynamic checker that detects and warns about some uses of uninitialized
-memory.
-
-Userspace programmers might be familiar with Valgrind's memcheck. The main
-difference between memcheck and kmemcheck is that memcheck works for userspace
-programs only, and kmemcheck works for the kernel only. The implementations
-are of course vastly different. Because of this, kmemcheck is not as accurate
-as memcheck, but it turns out to be good enough in practice to discover real
-programmer errors that the compiler is not able to find through static
-analysis.
-
-Enabling kmemcheck on a kernel will probably slow it down to the extent that
-the machine will not be usable for normal workloads such as e.g. an
-interactive desktop. kmemcheck will also cause the kernel to use about twice
-as much memory as normal. For this reason, kmemcheck is strictly a debugging
-feature.
-
-
-1. Downloading
-==============
-
-As of version 2.6.31-rc1, kmemcheck is included in the mainline kernel.
-
-
-2. Configuring and compiling
-============================
-
-kmemcheck only works for the x86 (both 32- and 64-bit) platform. A number of
-configuration variables must have specific settings in order for the kmemcheck
-menu to even appear in "menuconfig". These are:
-
-  o CONFIG_CC_OPTIMIZE_FOR_SIZE=n
-
-	This option is located under "General setup" / "Optimize for size".
-
-	Without this, gcc will use certain optimizations that usually lead to
-	false positive warnings from kmemcheck. An example of this is a 16-bit
-	field in a struct, where gcc may load 32 bits, then discard the upper
-	16 bits. kmemcheck sees only the 32-bit load, and may trigger a
-	warning for the upper 16 bits (if they're uninitialized).
-
-  o CONFIG_SLAB=y or CONFIG_SLUB=y
-
-	This option is located under "General setup" / "Choose SLAB
-	allocator".
-
-  o CONFIG_FUNCTION_TRACER=n
-
-	This option is located under "Kernel hacking" / "Tracers" / "Kernel
-	Function Tracer"
-
-	When function tracing is compiled in, gcc emits a call to another
-	function at the beginning of every function. This means that when the
-	page fault handler is called, the ftrace framework will be called
-	before kmemcheck has had a chance to handle the fault. If ftrace then
-	modifies memory that was tracked by kmemcheck, the result is an
-	endless recursive page fault.
-
-  o CONFIG_DEBUG_PAGEALLOC=n
-
-	This option is located under "Kernel hacking" / "Memory Debugging"
-	 / "Debug page memory allocations".
-
-In addition, I highly recommend turning on CONFIG_DEBUG_INFO=y. This is also
-located under "Kernel hacking". With this, you will be able to get line number
-information from the kmemcheck warnings, which is extremely valuable in
-debugging a problem. This option is not mandatory, however, because it slows
-down the compilation process and produces a much bigger kernel image.
-
-Now the kmemcheck menu should be visible (under "Kernel hacking" / "Memory
-Debugging" / "kmemcheck: trap use of uninitialized memory"). Here follows
-a description of the kmemcheck configuration variables:
-
-  o CONFIG_KMEMCHECK
-
-	This must be enabled in order to use kmemcheck at all...
-
-  o CONFIG_KMEMCHECK_[DISABLED | ENABLED | ONESHOT]_BY_DEFAULT
-
-	This option controls the status of kmemcheck at boot-time. "Enabled"
-	will enable kmemcheck right from the start, "disabled" will boot the
-	kernel as normal (but with the kmemcheck code compiled in, so it can
-	be enabled at run-time after the kernel has booted), and "one-shot" is
-	a special mode which will turn kmemcheck off automatically after
-	detecting the first use of uninitialized memory.
-
-	If you are using kmemcheck to actively debug a problem, then you
-	probably want to choose "enabled" here.
-
-	The one-shot mode is mostly useful in automated test setups because it
-	can prevent floods of warnings and increase the chances of the machine
-	surviving in case something is really wrong. In other cases, the one-
-	shot mode could actually be counter-productive because it would turn
-	itself off at the very first error -- in the case of a false positive
-	too -- and this would come in the way of debugging the specific
-	problem you were interested in.
-
-	If you would like to use your kernel as normal, but with a chance to
-	enable kmemcheck in case of some problem, it might be a good idea to
-	choose "disabled" here. When kmemcheck is disabled, most of the run-
-	time overhead is not incurred, and the kernel will be almost as fast
-	as normal.
-
-  o CONFIG_KMEMCHECK_QUEUE_SIZE
-
-	Select the maximum number of error reports to store in an internal
-	(fixed-size) buffer. Since errors can occur virtually anywhere and in
-	any context, we need a temporary storage area which is guaranteed not
-	to generate any other page faults when accessed. The queue will be
-	emptied as soon as a tasklet may be scheduled. If the queue is full,
-	new error reports will be lost.
-
-	The default value of 64 is probably fine. If some code produces more
-	than 64 errors within an irqs-off section, then the code is likely to
-	produce many, many more, too, and these additional reports seldom give
-	any more information (the first report is usually the most valuable
-	anyway).
-
-	This number might have to be adjusted if you are not using serial
-	console or similar to capture the kernel log. If you are using the
-	"dmesg" command to save the log, then getting a lot of kmemcheck
-	warnings might overflow the kernel log itself, and the earlier reports
-	will get lost in that way instead. Try setting this to 10 or so on
-	such a setup.
-
-  o CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT
-
-	Select the number of shadow bytes to save along with each entry of the
-	error-report queue. These bytes indicate what parts of an allocation
-	are initialized, uninitialized, etc. and will be displayed when an
-	error is detected to help the debugging of a particular problem.
-
-	The number entered here is actually the logarithm of the number of
-	bytes that will be saved. So if you pick for example 5 here, kmemcheck
-	will save 2^5 = 32 bytes.
-
-	The default value should be fine for debugging most problems. It also
-	fits nicely within 80 columns.
-
-  o CONFIG_KMEMCHECK_PARTIAL_OK
-
-	This option (when enabled) works around certain GCC optimizations that
-	produce 32-bit reads from 16-bit variables where the upper 16 bits are
-	thrown away afterwards.
-
-	The default value (enabled) is recommended. This may of course hide
-	some real errors, but disabling it would probably produce a lot of
-	false positives.
-
-  o CONFIG_KMEMCHECK_BITOPS_OK
-
-	This option silences warnings that would be generated for bit-field
-	accesses where not all the bits are initialized at the same time. This
-	may also hide some real bugs.
-
-	This option is probably obsolete, or it should be replaced with
-	the kmemcheck-/bitfield-annotations for the code in question. The
-	default value is therefore fine.
-
-Now compile the kernel as usual.
-
-
-3. How to use
-=============
-
-3.1. Booting
-============
-
-First some information about the command-line options. There is only one
-option specific to kmemcheck, and this is called "kmemcheck". It can be used
-to override the default mode as chosen by the CONFIG_KMEMCHECK_*_BY_DEFAULT
-option. Its possible settings are:
-
-  o kmemcheck=0 (disabled)
-  o kmemcheck=1 (enabled)
-  o kmemcheck=2 (one-shot mode)
-
-If SLUB debugging has been enabled in the kernel, it may take precedence over
-kmemcheck in such a way that the slab caches which are under SLUB debugging
-will not be tracked by kmemcheck. In order to ensure that this doesn't happen
-(even though it shouldn't by default), use SLUB's boot option "slub_debug",
-like this: slub_debug=-
-
-In fact, this option may also be used for fine-grained control over SLUB vs.
-kmemcheck. For example, if the command line includes "kmemcheck=1
-slub_debug=,dentry", then SLUB debugging will be used only for the "dentry"
-slab cache, and with kmemcheck tracking all the other caches. This is advanced
-usage, however, and is not generally recommended.
-
-
-3.2. Run-time enable/disable
-============================
-
-When the kernel has booted, it is possible to enable or disable kmemcheck at
-run-time. WARNING: This feature is still experimental and may cause false
-positive warnings to appear. Therefore, try not to use this. If you find that
-it doesn't work properly (e.g. you see an unreasonable amount of warnings), I
-will be happy to take bug reports.
-
-Use the file /proc/sys/kernel/kmemcheck for this purpose, e.g.:
-
-	$ echo 0 > /proc/sys/kernel/kmemcheck # disables kmemcheck
-
-The numbers are the same as for the kmemcheck= command-line option.
-
-
-3.3. Debugging
-==============
-
-A typical report will look something like this:
-
-WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
-80000000000000000000000000000000000000000088ffff0000000000000000
- i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
-         ^
-
-Pid: 1856, comm: ntpdate Not tainted 2.6.29-rc5 #264 945P-A
-RIP: 0010:[<ffffffff8104ede8>]  [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
-RSP: 0018:ffff88003cdf7d98  EFLAGS: 00210002
-RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
-RDX: ffff88003e5d6018 RSI: ffff88003e5d6024 RDI: ffff88003cdf7e84
-RBP: ffff88003cdf7db8 R08: ffff88003e5d6000 R09: 0000000000000000
-R10: 0000000000000080 R11: 0000000000000000 R12: 000000000000000e
-R13: ffff88003cdf7e78 R14: ffff88003d530710 R15: ffff88003d5a98c8
-FS:  0000000000000000(0000) GS:ffff880001982000(0063) knlGS:00000
-CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
-CR2: ffff88003f806ea0 CR3: 000000003c036000 CR4: 00000000000006a0
-DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
-DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
- [<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
- [<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
- [<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
- [<ffffffff8100c7b5>] int_signal+0x12/0x17
- [<ffffffffffffffff>] 0xffffffffffffffff
-
-The single most valuable information in this report is the RIP (or EIP on 32-
-bit) value. This will help us pinpoint exactly which instruction that caused
-the warning.
-
-If your kernel was compiled with CONFIG_DEBUG_INFO=y, then all we have to do
-is give this address to the addr2line program, like this:
-
-	$ addr2line -e vmlinux -i ffffffff8104ede8
-	arch/x86/include/asm/string_64.h:12
-	include/asm-generic/siginfo.h:287
-	kernel/signal.c:380
-	kernel/signal.c:410
-
-The "-e vmlinux" tells addr2line which file to look in. IMPORTANT: This must
-be the vmlinux of the kernel that produced the warning in the first place! If
-not, the line number information will almost certainly be wrong.
-
-The "-i" tells addr2line to also print the line numbers of inlined functions.
-In this case, the flag was very important, because otherwise, it would only
-have printed the first line, which is just a call to memcpy(), which could be
-called from a thousand places in the kernel, and is therefore not very useful.
-These inlined functions would not show up in the stack trace above, simply
-because the kernel doesn't load the extra debugging information. This
-technique can of course be used with ordinary kernel oopses as well.
-
-In this case, it's the caller of memcpy() that is interesting, and it can be
-found in include/asm-generic/siginfo.h, line 287:
-
-281 static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
-282 {
-283         if (from->si_code < 0)
-284                 memcpy(to, from, sizeof(*to));
-285         else
-286                 /* _sigchld is currently the largest know union member */
-287                 memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
-288 }
-
-Since this was a read (kmemcheck usually warns about reads only, though it can
-warn about writes to unallocated or freed memory as well), it was probably the
-"from" argument which contained some uninitialized bytes. Following the chain
-of calls, we move upwards to see where "from" was allocated or initialized,
-kernel/signal.c, line 380:
-
-359 static void collect_signal(int sig, struct sigpending *list, siginfo_t *info)
-360 {
-...
-367         list_for_each_entry(q, &list->list, list) {
-368                 if (q->info.si_signo == sig) {
-369                         if (first)
-370                                 goto still_pending;
-371                         first = q;
-...
-377         if (first) {
-378 still_pending:
-379                 list_del_init(&first->list);
-380                 copy_siginfo(info, &first->info);
-381                 __sigqueue_free(first);
-...
-392         }
-393 }
-
-Here, it is &first->info that is being passed on to copy_siginfo(). The
-variable "first" was found on a list -- passed in as the second argument to
-collect_signal(). We  continue our journey through the stack, to figure out
-where the item on "list" was allocated or initialized. We move to line 410:
-
-395 static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
-396                         siginfo_t *info)
-397 {
-...
-410                 collect_signal(sig, pending, info);
-...
-414 }
-
-Now we need to follow the "pending" pointer, since that is being passed on to
-collect_signal() as "list". At this point, we've run out of lines from the
-"addr2line" output. Not to worry, we just paste the next addresses from the
-kmemcheck stack dump, i.e.:
-
- [<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
- [<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
- [<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
- [<ffffffff8100c7b5>] int_signal+0x12/0x17
-
-	$ addr2line -e vmlinux -i ffffffff8104f04e ffffffff81050bd8 \
-		ffffffff8100b87d ffffffff8100c7b5
-	kernel/signal.c:446
-	kernel/signal.c:1806
-	arch/x86/kernel/signal.c:805
-	arch/x86/kernel/signal.c:871
-	arch/x86/kernel/entry_64.S:694
-
-Remember that since these addresses were found on the stack and not as the
-RIP value, they actually point to the _next_ instruction (they are return
-addresses). This becomes obvious when we look at the code for line 446:
-
-422 int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
-423 {
-...
-431                 signr = __dequeue_signal(&tsk->signal->shared_pending,
-432                                          mask, info);
-433                 /*
-434                  * itimer signal ?
-435                  *
-436                  * itimers are process shared and we restart periodic
-437                  * itimers in the signal delivery path to prevent DoS
-438                  * attacks in the high resolution timer case. This is
-439                  * compliant with the old way of self restarting
-440                  * itimers, as the SIGALRM is a legacy signal and only
-441                  * queued once. Changing the restart behaviour to
-442                  * restart the timer in the signal dequeue path is
-443                  * reducing the timer noise on heavy loaded !highres
-444                  * systems too.
-445                  */
-446                 if (unlikely(signr == SIGALRM)) {
-...
-489 }
-
-So instead of looking at 446, we should be looking at 431, which is the line
-that executes just before 446. Here we see that what we are looking for is
-&tsk->signal->shared_pending.
-
-Our next task is now to figure out which function that puts items on this
-"shared_pending" list. A crude, but efficient tool, is git grep:
-
-	$ git grep -n 'shared_pending' kernel/
-	...
-	kernel/signal.c:828:    pending = group ? &t->signal->shared_pending : &t->pending;
-	kernel/signal.c:1339:   pending = group ? &t->signal->shared_pending : &t->pending;
-	...
-
-There were more results, but none of them were related to list operations,
-and these were the only assignments. We inspect the line numbers more closely
-and find that this is indeed where items are being added to the list:
-
-816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
-817                         int group)
-818 {
-...
-828         pending = group ? &t->signal->shared_pending : &t->pending;
-...
-851         q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
-852                                              (is_si_special(info) ||
-853                                               info->si_code >= 0)));
-854         if (q) {
-855                 list_add_tail(&q->list, &pending->list);
-...
-890 }
-
-and:
-
-1309 int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group)
-1310 {
-....
-1339         pending = group ? &t->signal->shared_pending : &t->pending;
-1340         list_add_tail(&q->list, &pending->list);
-....
-1347 }
-
-In the first case, the list element we are looking for, "q", is being returned
-from the function __sigqueue_alloc(), which looks like an allocation function.
-Let's take a look at it:
-
-187 static struct sigqueue *__sigqueue_alloc(struct task_struct *t, gfp_t flags,
-188                                          int override_rlimit)
-189 {
-190         struct sigqueue *q = NULL;
-191         struct user_struct *user;
-192 
-193         /*
-194          * We won't get problems with the target's UID changing under us
-195          * because changing it requires RCU be used, and if t != current, the
-196          * caller must be holding the RCU readlock (by way of a spinlock) and
-197          * we use RCU protection here
-198          */
-199         user = get_uid(__task_cred(t)->user);
-200         atomic_inc(&user->sigpending);
-201         if (override_rlimit ||
-202             atomic_read(&user->sigpending) <=
-203                         t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur)
-204                 q = kmem_cache_alloc(sigqueue_cachep, flags);
-205         if (unlikely(q == NULL)) {
-206                 atomic_dec(&user->sigpending);
-207                 free_uid(user);
-208         } else {
-209                 INIT_LIST_HEAD(&q->list);
-210                 q->flags = 0;
-211                 q->user = user;
-212         }
-213 
-214         return q;
-215 }
-
-We see that this function initializes q->list, q->flags, and q->user. It seems
-that now is the time to look at the definition of "struct sigqueue", e.g.:
-
-14 struct sigqueue {
-15         struct list_head list;
-16         int flags;
-17         siginfo_t info;
-18         struct user_struct *user;
-19 };
-
-And, you might remember, it was a memcpy() on &first->info that caused the
-warning, so this makes perfect sense. It also seems reasonable to assume that
-it is the caller of __sigqueue_alloc() that has the responsibility of filling
-out (initializing) this member.
-
-But just which fields of the struct were uninitialized? Let's look at
-kmemcheck's report again:
-
-WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
-80000000000000000000000000000000000000000088ffff0000000000000000
- i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
-         ^
-
-These first two lines are the memory dump of the memory object itself, and the
-shadow bytemap, respectively. The memory object itself is in this case
-&first->info. Just beware that the start of this dump is NOT the start of the
-object itself! The position of the caret (^) corresponds with the address of
-the read (ffff88003e4a2024).
-
-The shadow bytemap dump legend is as follows:
-
-  i - initialized
-  u - uninitialized
-  a - unallocated (memory has been allocated by the slab layer, but has not
-      yet been handed off to anybody)
-  f - freed (memory has been allocated by the slab layer, but has been freed
-      by the previous owner)
-
-In order to figure out where (relative to the start of the object) the
-uninitialized memory was located, we have to look at the disassembly. For
-that, we'll need the RIP address again:
-
-RIP: 0010:[<ffffffff8104ede8>]  [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
-
-	$ objdump -d --no-show-raw-insn vmlinux | grep -C 8 ffffffff8104ede8:
-	ffffffff8104edc8:       mov    %r8,0x8(%r8)
-	ffffffff8104edcc:       test   %r10d,%r10d
-	ffffffff8104edcf:       js     ffffffff8104ee88 <__dequeue_signal+0x168>
-	ffffffff8104edd5:       mov    %rax,%rdx
-	ffffffff8104edd8:       mov    $0xc,%ecx
-	ffffffff8104eddd:       mov    %r13,%rdi
-	ffffffff8104ede0:       mov    $0x30,%eax
-	ffffffff8104ede5:       mov    %rdx,%rsi
-	ffffffff8104ede8:       rep movsl %ds:(%rsi),%es:(%rdi)
-	ffffffff8104edea:       test   $0x2,%al
-	ffffffff8104edec:       je     ffffffff8104edf0 <__dequeue_signal+0xd0>
-	ffffffff8104edee:       movsw  %ds:(%rsi),%es:(%rdi)
-	ffffffff8104edf0:       test   $0x1,%al
-	ffffffff8104edf2:       je     ffffffff8104edf5 <__dequeue_signal+0xd5>
-	ffffffff8104edf4:       movsb  %ds:(%rsi),%es:(%rdi)
-	ffffffff8104edf5:       mov    %r8,%rdi
-	ffffffff8104edf8:       callq  ffffffff8104de60 <__sigqueue_free>
-
-As expected, it's the "rep movsl" instruction from the memcpy() that causes
-the warning. We know about REP MOVSL that it uses the register RCX to count
-the number of remaining iterations. By taking a look at the register dump
-again (from the kmemcheck report), we can figure out how many bytes were left
-to copy:
-
-RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
-
-By looking at the disassembly, we also see that %ecx is being loaded with the
-value $0xc just before (ffffffff8104edd8), so we are very lucky. Keep in mind
-that this is the number of iterations, not bytes. And since this is a "long"
-operation, we need to multiply by 4 to get the number of bytes. So this means
-that the uninitialized value was encountered at 4 * (0xc - 0x9) = 12 bytes
-from the start of the object.
-
-We can now try to figure out which field of the "struct siginfo" that was not
-initialized. This is the beginning of the struct:
-
-40 typedef struct siginfo {
-41         int si_signo;
-42         int si_errno;
-43         int si_code;
-44                 
-45         union {
-..
-92         } _sifields;
-93 } siginfo_t;
-
-On 64-bit, the int is 4 bytes long, so it must the union member that has
-not been initialized. We can verify this using gdb:
-
-	$ gdb vmlinux
-	...
-	(gdb) p &((struct siginfo *) 0)->_sifields
-	$1 = (union {...} *) 0x10
-
-Actually, it seems that the union member is located at offset 0x10 -- which
-means that gcc has inserted 4 bytes of padding between the members si_code
-and _sifields. We can now get a fuller picture of the memory dump:
-
-         _----------------------------=> si_code
-        /        _--------------------=> (padding)
-       |        /        _------------=> _sifields(._kill._pid)
-       |       |        /        _----=> _sifields(._kill._uid)
-       |       |       |        / 
--------|-------|-------|-------|
-80000000000000000000000000000000000000000088ffff0000000000000000
- i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
-
-This allows us to realize another important fact: si_code contains the value
-0x80. Remember that x86 is little endian, so the first 4 bytes "80000000" are
-really the number 0x00000080. With a bit of research, we find that this is
-actually the constant SI_KERNEL defined in include/asm-generic/siginfo.h:
-
-144 #define SI_KERNEL       0x80            /* sent by the kernel from somewhere     */
-
-This macro is used in exactly one place in the x86 kernel: In send_signal()
-in kernel/signal.c:
-
-816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
-817                         int group)
-818 {
-...
-828         pending = group ? &t->signal->shared_pending : &t->pending;
-...
-851         q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
-852                                              (is_si_special(info) ||
-853                                               info->si_code >= 0)));
-854         if (q) {
-855                 list_add_tail(&q->list, &pending->list);
-856                 switch ((unsigned long) info) {
-...
-865                 case (unsigned long) SEND_SIG_PRIV:
-866                         q->info.si_signo = sig;
-867                         q->info.si_errno = 0;
-868                         q->info.si_code = SI_KERNEL;
-869                         q->info.si_pid = 0;
-870                         q->info.si_uid = 0;
-871                         break;
-...
-890 }
-
-Not only does this match with the .si_code member, it also matches the place
-we found earlier when looking for where siginfo_t objects are enqueued on the
-"shared_pending" list.
-
-So to sum up: It seems that it is the padding introduced by the compiler
-between two struct fields that is uninitialized, and this gets reported when
-we do a memcpy() on the struct. This means that we have identified a false
-positive warning.
-
-Normally, kmemcheck will not report uninitialized accesses in memcpy() calls
-when both the source and destination addresses are tracked. (Instead, we copy
-the shadow bytemap as well). In this case, the destination address clearly
-was not tracked. We can dig a little deeper into the stack trace from above:
-
-	arch/x86/kernel/signal.c:805
-	arch/x86/kernel/signal.c:871
-	arch/x86/kernel/entry_64.S:694
-
-And we clearly see that the destination siginfo object is located on the
-stack:
-
-782 static void do_signal(struct pt_regs *regs)
-783 {
-784         struct k_sigaction ka;
-785         siginfo_t info;
-...
-804         signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-...
-854 }
-
-And this &info is what eventually gets passed to copy_siginfo() as the
-destination argument.
-
-Now, even though we didn't find an actual error here, the example is still a
-good one, because it shows how one would go about to find out what the report
-was all about.
-
-
-3.4. Annotating false positives
-===============================
-
-There are a few different ways to make annotations in the source code that
-will keep kmemcheck from checking and reporting certain allocations. Here
-they are:
-
-  o __GFP_NOTRACK_FALSE_POSITIVE
-
-	This flag can be passed to kmalloc() or kmem_cache_alloc() (therefore
-	also to other functions that end up calling one of these) to indicate
-	that the allocation should not be tracked because it would lead to
-	a false positive report. This is a "big hammer" way of silencing
-	kmemcheck; after all, even if the false positive pertains to 
-	particular field in a struct, for example, we will now lose the
-	ability to find (real) errors in other parts of the same struct.
-
-	Example:
-
-	    /* No warnings will ever trigger on accessing any part of x */
-	    x = kmalloc(sizeof *x, GFP_KERNEL | __GFP_NOTRACK_FALSE_POSITIVE);
-
-  o kmemcheck_bitfield_begin(name)/kmemcheck_bitfield_end(name) and
-	kmemcheck_annotate_bitfield(ptr, name)
-
-	The first two of these three macros can be used inside struct
-	definitions to signal, respectively, the beginning and end of a
-	bitfield. Additionally, this will assign the bitfield a name, which
-	is given as an argument to the macros.
-
-	Having used these markers, one can later use
-	kmemcheck_annotate_bitfield() at the point of allocation, to indicate
-	which parts of the allocation is part of a bitfield.
-
-	Example:
-
-	    struct foo {
-		int x;
-
-		kmemcheck_bitfield_begin(flags);
-		int flag_a:1;
-		int flag_b:1;
-		kmemcheck_bitfield_end(flags);
-
-		int y;
-	    };
-
-	    struct foo *x = kmalloc(sizeof *x);
-
-	    /* No warnings will trigger on accessing the bitfield of x */
-	    kmemcheck_annotate_bitfield(x, flags);
-
-	Note that kmemcheck_annotate_bitfield() can be used even before the
-	return value of kmalloc() is checked -- in other words, passing NULL
-	as the first argument is legal (and will do nothing).
-
-
-4. Reporting errors
-===================
-
-As we have seen, kmemcheck will produce false positive reports. Therefore, it
-is not very wise to blindly post kmemcheck warnings to mailing lists and
-maintainers. Instead, I encourage maintainers and developers to find errors
-in their own code. If you get a warning, you can try to work around it, try
-to figure out if it's a real error or not, or simply ignore it. Most
-developers know their own code and will quickly and efficiently determine the
-root cause of a kmemcheck report. This is therefore also the most efficient
-way to work with kmemcheck.
-
-That said, we (the kmemcheck maintainers) will always be on the lookout for
-false positives that we can annotate and silence. So whatever you find,
-please drop us a note privately! Kernel configs and steps to reproduce (if
-available) are of course a great help too.
-
-Happy hacking!
-
-
-5. Technical description
-========================
-
-kmemcheck works by marking memory pages non-present. This means that whenever
-somebody attempts to access the page, a page fault is generated. The page
-fault handler notices that the page was in fact only hidden, and so it calls
-on the kmemcheck code to make further investigations.
-
-When the investigations are completed, kmemcheck "shows" the page by marking
-it present (as it would be under normal circumstances). This way, the
-interrupted code can continue as usual.
-
-But after the instruction has been executed, we should hide the page again, so
-that we can catch the next access too! Now kmemcheck makes use of a debugging
-feature of the processor, namely single-stepping. When the processor has
-finished the one instruction that generated the memory access, a debug
-exception is raised. From here, we simply hide the page again and continue
-execution, this time with the single-stepping feature turned off.
-
-kmemcheck requires some assistance from the memory allocator in order to work.
-The memory allocator needs to
-
-  1. Tell kmemcheck about newly allocated pages and pages that are about to
-     be freed. This allows kmemcheck to set up and tear down the shadow memory
-     for the pages in question. The shadow memory stores the status of each
-     byte in the allocation proper, e.g. whether it is initialized or
-     uninitialized.
-
-  2. Tell kmemcheck which parts of memory should be marked uninitialized.
-     There are actually a few more states, such as "not yet allocated" and
-     "recently freed".
-
-If a slab cache is set up using the SLAB_NOTRACK flag, it will never return
-memory that can take page faults because of kmemcheck.
-
-If a slab cache is NOT set up using the SLAB_NOTRACK flag, callers can still
-request memory with the __GFP_NOTRACK or __GFP_NOTRACK_FALSE_POSITIVE flags.
-This does not prevent the page faults from occurring, however, but marks the
-object in question as being initialized so that no warnings will ever be
-produced for this object.
-
-Currently, the SLAB and SLUB allocators are supported by kmemcheck.
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 1f9b3e2..1f6d45a 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -103,6 +103,16 @@
 or in registers.  The jprobe will work in either case, so long as the
 handler's prototype matches that of the probed function.
 
+Note that in some architectures (e.g.: arm64 and sparc64) the stack
+copy is not done, as the actual location of stacked parameters may be
+outside of a reasonable MAX_STACK_SIZE value and because that location
+cannot be determined by the jprobes code. In this case the jprobes
+user must be careful to make certain the calling signature of the
+function does not cause parameters to be passed on the stack (e.g.:
+more than eight function arguments, an argument of more than sixteen
+bytes, or more than 64 bytes of argument data, depending on
+architecture).
+
 1.3 Return Probes
 
 1.3.1 How Does a Return Probe Work?
diff --git a/Documentation/media/Makefile b/Documentation/media/Makefile
index 39e2d76..a7fb352 100644
--- a/Documentation/media/Makefile
+++ b/Documentation/media/Makefile
@@ -10,7 +10,8 @@
 
 TARGETS := $(addprefix $(BUILDDIR)/, $(FILES))
 
-htmldocs: $(BUILDDIR) ${TARGETS}
+.PHONY: all
+all: $(BUILDDIR) ${TARGETS}
 
 $(BUILDDIR):
 	$(Q)mkdir -p $@
diff --git a/Documentation/media/conf.py b/Documentation/media/conf.py
new file mode 100644
index 0000000..bef927b
--- /dev/null
+++ b/Documentation/media/conf.py
@@ -0,0 +1,10 @@
+# -*- coding: utf-8; mode: python -*-
+
+project = 'Linux Media Subsystem Documentation'
+
+tags.add("subproject")
+
+latex_documents = [
+    ('index', 'media.tex', 'Linux Media Subsystem Documentation',
+     'The kernel development community', 'manual'),
+]
diff --git a/Documentation/media/conf_nitpick.py b/Documentation/media/conf_nitpick.py
new file mode 100644
index 0000000..11beac2
--- /dev/null
+++ b/Documentation/media/conf_nitpick.py
@@ -0,0 +1,93 @@
+# -*- coding: utf-8; mode: python -*-
+
+project = 'Linux Media Subsystem Documentation'
+
+# It is possible to run Sphinx in nickpick mode with:
+nitpicky = True
+
+# within nit-picking build, do not refer to any intersphinx object
+intersphinx_mapping = {}
+
+# In nickpick mode, it will complain about lots of missing references that
+#
+# 1) are just typedefs like: bool, __u32, etc;
+# 2) It will complain for things like: enum, NULL;
+# 3) It will complain for symbols that should be on different
+#    books (but currently aren't ported to ReST)
+#
+# The list below has a list of such symbols to be ignored in nitpick mode
+#
+nitpick_ignore = [
+    ("c:func", "clock_gettime"),
+    ("c:func", "close"),
+    ("c:func", "container_of"),
+    ("c:func", "determine_valid_ioctls"),
+    ("c:func", "ERR_PTR"),
+    ("c:func", "ioctl"),
+    ("c:func", "IS_ERR"),
+    ("c:func", "mmap"),
+    ("c:func", "open"),
+    ("c:func", "pci_name"),
+    ("c:func", "poll"),
+    ("c:func", "PTR_ERR"),
+    ("c:func", "read"),
+    ("c:func", "release"),
+    ("c:func", "set"),
+    ("c:func", "struct fd_set"),
+    ("c:func", "struct pollfd"),
+    ("c:func", "usb_make_path"),
+    ("c:func", "write"),
+    ("c:type", "atomic_t"),
+    ("c:type", "bool"),
+    ("c:type", "buf_queue"),
+    ("c:type", "device"),
+    ("c:type", "device_driver"),
+    ("c:type", "device_node"),
+    ("c:type", "enum"),
+    ("c:type", "file"),
+    ("c:type", "i2c_adapter"),
+    ("c:type", "i2c_board_info"),
+    ("c:type", "i2c_client"),
+    ("c:type", "ktime_t"),
+    ("c:type", "led_classdev_flash"),
+    ("c:type", "list_head"),
+    ("c:type", "lock_class_key"),
+    ("c:type", "module"),
+    ("c:type", "mutex"),
+    ("c:type", "pci_dev"),
+    ("c:type", "pdvbdev"),
+    ("c:type", "poll_table_struct"),
+    ("c:type", "s32"),
+    ("c:type", "s64"),
+    ("c:type", "sd"),
+    ("c:type", "spi_board_info"),
+    ("c:type", "spi_device"),
+    ("c:type", "spi_master"),
+    ("c:type", "struct fb_fix_screeninfo"),
+    ("c:type", "struct pollfd"),
+    ("c:type", "struct timeval"),
+    ("c:type", "struct video_capability"),
+    ("c:type", "u16"),
+    ("c:type", "u32"),
+    ("c:type", "u64"),
+    ("c:type", "u8"),
+    ("c:type", "union"),
+    ("c:type", "usb_device"),
+
+    ("cpp:type", "boolean"),
+    ("cpp:type", "fd"),
+    ("cpp:type", "fd_set"),
+    ("cpp:type", "int16_t"),
+    ("cpp:type", "NULL"),
+    ("cpp:type", "off_t"),
+    ("cpp:type", "pollfd"),
+    ("cpp:type", "size_t"),
+    ("cpp:type", "ssize_t"),
+    ("cpp:type", "timeval"),
+    ("cpp:type", "__u16"),
+    ("cpp:type", "__u32"),
+    ("cpp:type", "__u64"),
+    ("cpp:type", "uint16_t"),
+    ("cpp:type", "uint32_t"),
+    ("cpp:type", "video_system_t"),
+]
diff --git a/Documentation/media/index.rst b/Documentation/media/index.rst
new file mode 100644
index 0000000..7f8f0af
--- /dev/null
+++ b/Documentation/media/index.rst
@@ -0,0 +1,19 @@
+Linux Media Subsystem Documentation
+===================================
+
+Contents:
+
+.. toctree::
+   :maxdepth: 2
+
+   media_uapi
+   media_kapi
+   dvb-drivers/index
+   v4l-drivers/index
+
+.. only::  subproject
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/media/uapi/cec/cec-func-open.rst b/Documentation/media/uapi/cec/cec-func-open.rst
index 38fd7e0..7c0f981 100644
--- a/Documentation/media/uapi/cec/cec-func-open.rst
+++ b/Documentation/media/uapi/cec/cec-func-open.rst
@@ -32,7 +32,7 @@
     Open flags. Access mode must be ``O_RDWR``.
 
     When the ``O_NONBLOCK`` flag is given, the
-    :ref:`CEC_RECEIVE <CEC_RECEIVE>` and :ref:`CEC_DQEVENT <CEC_DQEVENT>` ioctls
+    :ref:`CEC_RECEIVE <CEC_RECEIVE>` and :c:func:`CEC_DQEVENT` ioctls
     will return the ``EAGAIN`` error code when no message or event is available, and
     ioctls :ref:`CEC_TRANSMIT <CEC_TRANSMIT>`,
     :ref:`CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>` and
diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
index 2e1e7392..f8caa28 100644
--- a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
@@ -15,7 +15,8 @@
 Synopsis
 ========
 
-.. cpp:function:: int ioctl( int fd, int request, struct cec_event *argp )
+.. c:function:: int ioctl( int fd, int request, struct cec_event *argp )
+   :name: CEC_DQEVENT
 
 Arguments
 =========
@@ -36,7 +37,7 @@
    and is currently only available as a staging kernel module.
 
 CEC devices can send asynchronous events. These can be retrieved by
-calling :ref:`ioctl CEC_DQEVENT <CEC_DQEVENT>`. If the file descriptor is in
+calling :c:func:`CEC_DQEVENT`. If the file descriptor is in
 non-blocking mode and no event is pending, then it will return -1 and
 set errno to the ``EAGAIN`` error code.
 
diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt
index 1241ac1..d5ae6ce 100644
--- a/Documentation/scsi/scsi-parameters.txt
+++ b/Documentation/scsi/scsi-parameters.txt
@@ -79,8 +79,6 @@
 
 	ncr53c8xx=	[HW,SCSI]
 
-	nodisconnect	[HW,SCSI,M68K] Disables SCSI disconnects.
-
 	osst=		[HW,SCSI] SCSI Tape Driver
 			Format: <buffer_size>,<write_threshold>
 			See also Documentation/scsi/st.txt.
diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt
index 2253b8b..389fcd4 100644
--- a/Documentation/serial/serial-rs485.txt
+++ b/Documentation/serial/serial-rs485.txt
@@ -45,9 +45,8 @@
 
 	#include <linux/serial.h>
 
-	/* RS485 ioctls: */
-	#define TIOCGRS485      0x542E
-	#define TIOCSRS485      0x542F
+	/* Include definition for RS485 ioctls: TIOCGRS485 and TIOCSRS485 */
+	#include <sys/ioctl.h>
 
 	/* Open your specific device (e.g., /dev/mydevice): */
 	int fd = open ("/dev/mydevice", O_RDWR);
diff --git a/Documentation/sphinx-static/theme_overrides.css b/Documentation/sphinx-static/theme_overrides.css
index e88461c..d5764a4 100644
--- a/Documentation/sphinx-static/theme_overrides.css
+++ b/Documentation/sphinx-static/theme_overrides.css
@@ -42,6 +42,20 @@
     caption a.headerlink { opacity: 0; }
     caption a.headerlink:hover { opacity: 1; }
 
+    /* Menu selection and keystrokes */
+
+    span.menuselection {
+	color: blue;
+	font-family: "Courier New", Courier, monospace
+    }
+
+    code.kbd, code.kbd span {
+	color: white;
+	background-color: darkblue;
+	font-weight: bold;
+	font-family: "Courier New", Courier, monospace
+    }
+
     /* inline literal: drop the borderbox, padding and red color */
 
     code, .rst-content tt, .rst-content code {
@@ -55,5 +69,4 @@
     .rst-content tt.literal,.rst-content tt.literal,.rst-content code.literal {
         color: inherit;
     }
-
 }
diff --git a/Documentation/sphinx/cdomain.py b/Documentation/sphinx/cdomain.py
new file mode 100644
index 0000000..df0419c
--- /dev/null
+++ b/Documentation/sphinx/cdomain.py
@@ -0,0 +1,165 @@
+# -*- coding: utf-8; mode: python -*-
+# pylint: disable=W0141,C0113,C0103,C0325
+u"""
+    cdomain
+    ~~~~~~~
+
+    Replacement for the sphinx c-domain.
+
+    :copyright:  Copyright (C) 2016  Markus Heiser
+    :license:    GPL Version 2, June 1991 see Linux/COPYING for details.
+
+    List of customizations:
+
+    * Moved the *duplicate C object description* warnings for function
+      declarations in the nitpicky mode. See Sphinx documentation for
+      the config values for ``nitpick`` and ``nitpick_ignore``.
+
+    * Add option 'name' to the "c:function:" directive.  With option 'name' the
+      ref-name of a function can be modified. E.g.::
+
+          .. c:function:: int ioctl( int fd, int request )
+             :name: VIDIOC_LOG_STATUS
+
+      The func-name (e.g. ioctl) remains in the output but the ref-name changed
+      from 'ioctl' to 'VIDIOC_LOG_STATUS'. The function is referenced by::
+
+          * :c:func:`VIDIOC_LOG_STATUS` or
+          * :any:`VIDIOC_LOG_STATUS` (``:any:`` needs sphinx 1.3)
+
+     * Handle signatures of function-like macros well. Don't try to deduce
+       arguments types of function-like macros.
+
+"""
+
+from docutils import nodes
+from docutils.parsers.rst import directives
+
+import sphinx
+from sphinx import addnodes
+from sphinx.domains.c import c_funcptr_sig_re, c_sig_re
+from sphinx.domains.c import CObject as Base_CObject
+from sphinx.domains.c import CDomain as Base_CDomain
+
+__version__  = '1.0'
+
+# Get Sphinx version
+major, minor, patch = map(int, sphinx.__version__.split("."))
+
+def setup(app):
+
+    app.override_domain(CDomain)
+
+    return dict(
+        version = __version__,
+        parallel_read_safe = True,
+        parallel_write_safe = True
+    )
+
+class CObject(Base_CObject):
+
+    """
+    Description of a C language object.
+    """
+    option_spec = {
+        "name" : directives.unchanged
+    }
+
+    def handle_func_like_macro(self, sig, signode):
+        u"""Handles signatures of function-like macros.
+
+        If the objtype is 'function' and the the signature ``sig`` is a
+        function-like macro, the name of the macro is returned. Otherwise
+        ``False`` is returned.  """
+
+        if not self.objtype == 'function':
+            return False
+
+        m = c_funcptr_sig_re.match(sig)
+        if m is None:
+            m = c_sig_re.match(sig)
+            if m is None:
+                raise ValueError('no match')
+
+        rettype, fullname, arglist, _const = m.groups()
+        arglist = arglist.strip()
+        if rettype or not arglist:
+            return False
+
+        arglist = arglist.replace('`', '').replace('\\ ', '') # remove markup
+        arglist = [a.strip() for a in arglist.split(",")]
+
+        # has the first argument a type?
+        if len(arglist[0].split(" ")) > 1:
+            return False
+
+        # This is a function-like macro, it's arguments are typeless!
+        signode  += addnodes.desc_name(fullname, fullname)
+        paramlist = addnodes.desc_parameterlist()
+        signode  += paramlist
+
+        for argname in arglist:
+            param = addnodes.desc_parameter('', '', noemph=True)
+            # separate by non-breaking space in the output
+            param += nodes.emphasis(argname, argname)
+            paramlist += param
+
+        return fullname
+
+    def handle_signature(self, sig, signode):
+        """Transform a C signature into RST nodes."""
+
+        fullname = self.handle_func_like_macro(sig, signode)
+        if not fullname:
+            fullname = super(CObject, self).handle_signature(sig, signode)
+
+        if "name" in self.options:
+            if self.objtype == 'function':
+                fullname = self.options["name"]
+            else:
+                # FIXME: handle :name: value of other declaration types?
+                pass
+        return fullname
+
+    def add_target_and_index(self, name, sig, signode):
+        # for C API items we add a prefix since names are usually not qualified
+        # by a module name and so easily clash with e.g. section titles
+        targetname = 'c.' + name
+        if targetname not in self.state.document.ids:
+            signode['names'].append(targetname)
+            signode['ids'].append(targetname)
+            signode['first'] = (not self.names)
+            self.state.document.note_explicit_target(signode)
+            inv = self.env.domaindata['c']['objects']
+            if (name in inv and self.env.config.nitpicky):
+                if self.objtype == 'function':
+                    if ('c:func', name) not in self.env.config.nitpick_ignore:
+                        self.state_machine.reporter.warning(
+                            'duplicate C object description of %s, ' % name +
+                            'other instance in ' + self.env.doc2path(inv[name][0]),
+                            line=self.lineno)
+            inv[name] = (self.env.docname, self.objtype)
+
+        indextext = self.get_index_text(name)
+        if indextext:
+            if major == 1 and minor < 4:
+                # indexnode's tuple changed in 1.4
+                # https://github.com/sphinx-doc/sphinx/commit/e6a5a3a92e938fcd75866b4227db9e0524d58f7c
+                self.indexnode['entries'].append(
+                    ('single', indextext, targetname, ''))
+            else:
+                self.indexnode['entries'].append(
+                    ('single', indextext, targetname, '', None))
+
+class CDomain(Base_CDomain):
+
+    """C language domain."""
+    name = 'c'
+    label = 'C'
+    directives = {
+        'function': CObject,
+        'member':   CObject,
+        'macro':    CObject,
+        'type':     CObject,
+        'var':      CObject,
+    }
diff --git a/Documentation/sphinx/kernel-doc.py b/Documentation/sphinx/kernel-doc.py
index f6920c0..d15e07f 100644
--- a/Documentation/sphinx/kernel-doc.py
+++ b/Documentation/sphinx/kernel-doc.py
@@ -39,6 +39,8 @@
 from sphinx.util.compat import Directive
 from sphinx.ext.autodoc import AutodocReporter
 
+__version__  = '1.0'
+
 class KernelDocDirective(Directive):
     """Extract kernel-doc comments from the specified file"""
     required_argument = 1
@@ -139,3 +141,9 @@
     app.add_config_value('kerneldoc_verbosity', 1, 'env')
 
     app.add_directive('kernel-doc', KernelDocDirective)
+
+    return dict(
+        version = __version__,
+        parallel_read_safe = True,
+        parallel_write_safe = True
+    )
diff --git a/Documentation/sphinx/kernel_include.py b/Documentation/sphinx/kernel_include.py
index db57382..f523aa6 100755
--- a/Documentation/sphinx/kernel_include.py
+++ b/Documentation/sphinx/kernel_include.py
@@ -39,11 +39,18 @@
 from docutils.parsers.rst.directives.body import CodeBlock, NumberLines
 from docutils.parsers.rst.directives.misc import Include
 
+__version__  = '1.0'
+
 # ==============================================================================
 def setup(app):
 # ==============================================================================
 
     app.add_directive("kernel-include", KernelInclude)
+    return dict(
+        version = __version__,
+        parallel_read_safe = True,
+        parallel_write_safe = True
+    )
 
 # ==============================================================================
 class KernelInclude(Include):
diff --git a/Documentation/sphinx/load_config.py b/Documentation/sphinx/load_config.py
new file mode 100644
index 0000000..301a21a
--- /dev/null
+++ b/Documentation/sphinx/load_config.py
@@ -0,0 +1,32 @@
+# -*- coding: utf-8; mode: python -*-
+# pylint: disable=R0903, C0330, R0914, R0912, E0401
+
+import os
+import sys
+from sphinx.util.pycompat import execfile_
+
+# ------------------------------------------------------------------------------
+def loadConfig(namespace):
+# ------------------------------------------------------------------------------
+
+    u"""Load an additional configuration file into *namespace*.
+
+    The name of the configuration file is taken from the environment
+    ``SPHINX_CONF``. The external configuration file extends (or overwrites) the
+    configuration values from the origin ``conf.py``.  With this you are able to
+    maintain *build themes*.  """
+
+    config_file = os.environ.get("SPHINX_CONF", None)
+    if (config_file is not None
+        and os.path.normpath(namespace["__file__"]) != os.path.normpath(config_file) ):
+        config_file = os.path.abspath(config_file)
+
+        if os.path.isfile(config_file):
+            sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
+            config = namespace.copy()
+            config['__file__'] = config_file
+            execfile_(config_file, config)
+            del config['__file__']
+            namespace.update(config)
+        else:
+            sys.stderr.write("WARNING: additional sphinx-config not found: %s\n" % config_file)
diff --git a/Documentation/sphinx/parse-headers.pl b/Documentation/sphinx/parse-headers.pl
index 34bd9e2..74089b0 100755
--- a/Documentation/sphinx/parse-headers.pl
+++ b/Documentation/sphinx/parse-headers.pl
@@ -220,7 +220,7 @@
 #
 # Add escape codes for special characters
 #
-$data =~ s,([\_\`\*\<\>\&\\\\:\/\|]),\\$1,g;
+$data =~ s,([\_\`\*\<\>\&\\\\:\/\|\%\$\#\{\}\~\^]),\\$1,g;
 
 $data =~ s,DEPRECATED,**DEPRECATED**,g;
 
diff --git a/Documentation/sphinx/rstFlatTable.py b/Documentation/sphinx/rstFlatTable.py
old mode 100644
new mode 100755
index 26db852..55f2757
--- a/Documentation/sphinx/rstFlatTable.py
+++ b/Documentation/sphinx/rstFlatTable.py
@@ -73,6 +73,12 @@
     roles.register_local_role('cspan', c_span)
     roles.register_local_role('rspan', r_span)
 
+    return dict(
+        version = __version__,
+        parallel_read_safe = True,
+        parallel_write_safe = True
+    )
+
 # ==============================================================================
 def c_span(name, rawtext, text, lineno, inliner, options=None, content=None):
 # ==============================================================================
diff --git a/Documentation/stable_api_nonsense.txt b/Documentation/stable_api_nonsense.txt
index db3be89..24f5aee 100644
--- a/Documentation/stable_api_nonsense.txt
+++ b/Documentation/stable_api_nonsense.txt
@@ -1,17 +1,26 @@
+.. _stable_api_nonsense:
+
 The Linux Kernel Driver Interface
+==================================
+
 (all of your questions answered and then some)
 
 Greg Kroah-Hartman <greg@kroah.com>
 
-This is being written to try to explain why Linux does not have a binary
-kernel interface, nor does it have a stable kernel interface.  Please
-realize that this article describes the _in kernel_ interfaces, not the
-kernel to userspace interfaces.  The kernel to userspace interface is
-the one that application programs use, the syscall interface.  That
-interface is _very_ stable over time, and will not break.  I have old
-programs that were built on a pre 0.9something kernel that still work
-just fine on the latest 2.6 kernel release.  That interface is the one
-that users and application programmers can count on being stable.
+This is being written to try to explain why Linux **does not have a binary
+kernel interface, nor does it have a stable kernel interface**.
+
+.. note::
+
+  Please realize that this article describes the **in kernel** interfaces, not
+  the kernel to userspace interfaces.
+
+  The kernel to userspace interface is the one that application programs use,
+  the syscall interface.  That interface is **very** stable over time, and
+  will not break.  I have old programs that were built on a pre 0.9something
+  kernel that still work just fine on the latest 2.6 kernel release.
+  That interface is the one that users and application programmers can count
+  on being stable.
 
 
 Executive Summary
@@ -33,7 +42,7 @@
 the world, they neither see this interface, nor do they care about it at
 all.
 
-First off, I'm not going to address _any_ legal issues about closed
+First off, I'm not going to address **any** legal issues about closed
 source, hidden source, binary blobs, source wrappers, or any other term
 that describes kernel drivers that do not have their source code
 released under the GPL.  Please consult a lawyer if you have any legal
@@ -51,19 +60,23 @@
 Assuming that we had a stable kernel source interface for the kernel, a
 binary interface would naturally happen too, right?  Wrong.  Please
 consider the following facts about the Linux kernel:
+
   - Depending on the version of the C compiler you use, different kernel
     data structures will contain different alignment of structures, and
     possibly include different functions in different ways (putting
     functions inline or not.)  The individual function organization
     isn't that important, but the different data structure padding is
     very important.
+
   - Depending on what kernel build options you select, a wide range of
     different things can be assumed by the kernel:
+
       - different structures can contain different fields
       - Some functions may not be implemented at all, (i.e. some locks
 	compile away to nothing for non-SMP builds.)
       - Memory within the kernel can be aligned in different ways,
 	depending on the build options.
+
   - Linux runs on a wide range of different processor architectures.
     There is no way that binary drivers from one architecture will run
     on another architecture properly.
@@ -105,6 +118,7 @@
 undergone at least three different reworks over the lifetime of this
 subsystem.  These reworks were done to address a number of different
 issues:
+
   - A change from a synchronous model of data streams to an asynchronous
     one.  This reduced the complexity of a number of drivers and
     increased the throughput of all USB drivers such that we are now
@@ -166,6 +180,7 @@
 
 The very good side effects of having your driver in the main kernel tree
 are:
+
   - The quality of the driver will rise as the maintenance costs (to the
     original developer) will decrease.
   - Other developers will add features to your driver.
@@ -175,7 +190,7 @@
     changes require it.
   - The driver automatically gets shipped in all Linux distributions
     without having to ask the distros to add it.
-    
+
 As Linux supports a larger number of different devices "out of the box"
 than any other operating system, and it supports these devices on more
 different processor architectures than any other operating system, this
diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt
index ffd4575..4d82e31 100644
--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@@ -1,4 +1,7 @@
-Everything you ever wanted to know about Linux -stable releases.
+.. _stable_kernel_rules:
+
+Everything you ever wanted to know about Linux -stable releases
+===============================================================
 
 Rules on what kind of patches are accepted, and which ones are not, into the
 "-stable" tree:
@@ -23,68 +26,94 @@
    race can be exploited is also provided.
  - It cannot contain any "trivial" fixes in it (spelling changes,
    whitespace cleanups, etc).
- - It must follow the Documentation/SubmittingPatches rules.
+ - It must follow the
+   :ref:`Documentation/SubmittingPatches <submittingpatches>`
+   rules.
  - It or an equivalent fix must already exist in Linus' tree (upstream).
 
 
-Procedure for submitting patches to the -stable tree:
+Procedure for submitting patches to the -stable tree
+----------------------------------------------------
 
  - If the patch covers files in net/ or drivers/net please follow netdev stable
    submission guidelines as described in
    Documentation/networking/netdev-FAQ.txt
  - Security patches should not be handled (solely) by the -stable review
-   process but should follow the procedures in Documentation/SecurityBugs.
+   process but should follow the procedures in
+   :ref:`Documentation/SecurityBugs <securitybugs>`.
 
-For all other submissions, choose one of the following procedures:
+For all other submissions, choose one of the following procedures
+-----------------------------------------------------------------
 
-   --- Option 1 ---
+.. _option_1:
 
-   To have the patch automatically included in the stable tree, add the tag
+Option 1
+********
+
+To have the patch automatically included in the stable tree, add the tag
+
+.. code-block:: none
+
      Cc: stable@vger.kernel.org
-   in the sign-off area. Once the patch is merged it will be applied to
-   the stable tree without anything else needing to be done by the author
-   or subsystem maintainer.
 
-   --- Option 2 ---
+in the sign-off area. Once the patch is merged it will be applied to
+the stable tree without anything else needing to be done by the author
+or subsystem maintainer.
 
-   After the patch has been merged to Linus' tree, send an email to
-   stable@vger.kernel.org containing the subject of the patch, the commit ID,
-   why you think it should be applied, and what kernel version you wish it to
-   be applied to.
+.. _option_2:
 
-   --- Option 3 ---
+Option 2
+********
 
-   Send the patch, after verifying that it follows the above rules, to
-   stable@vger.kernel.org.  You must note the upstream commit ID in the
-   changelog of your submission, as well as the kernel version you wish
-   it to be applied to.
+After the patch has been merged to Linus' tree, send an email to
+stable@vger.kernel.org containing the subject of the patch, the commit ID,
+why you think it should be applied, and what kernel version you wish it to
+be applied to.
 
-Option 1 is *strongly* preferred, is the easiest and most common.  Options 2 and
-3 are more useful if the patch isn't deemed worthy at the time it is applied to
-a public git tree (for instance, because it deserves more regression testing
-first).  Option 3 is especially useful if the patch needs some special handling
-to apply to an older kernel (e.g., if API's have changed in the meantime).
+.. _option_3:
 
-Note that for Option 3, if the patch deviates from the original upstream patch
-(for example because it had to be backported) this must be very clearly
-documented and justified in the patch description.
+Option 3
+********
+
+Send the patch, after verifying that it follows the above rules, to
+stable@vger.kernel.org.  You must note the upstream commit ID in the
+changelog of your submission, as well as the kernel version you wish
+it to be applied to.
+
+:ref:`option_1` is **strongly** preferred, is the easiest and most common.
+:ref:`option_2` and :ref:`option_3` are more useful if the patch isn't deemed
+worthy at the time it is applied to a public git tree (for instance, because
+it deserves more regression testing first).  :ref:`option_3` is especially
+useful if the patch needs some special handling to apply to an older kernel
+(e.g., if API's have changed in the meantime).
+
+Note that for :ref:`option_3`, if the patch deviates from the original
+upstream patch (for example because it had to be backported) this must be very
+clearly documented and justified in the patch description.
 
 The upstream commit ID must be specified with a separate line above the commit
 text, like this:
 
+.. code-block:: none
+
     commit <sha1> upstream.
 
 Additionally, some patches submitted via Option 1 may have additional patch
 prerequisites which can be cherry-picked. This can be specified in the following
 format in the sign-off area:
 
+.. code-block:: none
+
      Cc: <stable@vger.kernel.org> # 3.3.x: a1f84a3: sched: Check for idle
      Cc: <stable@vger.kernel.org> # 3.3.x: 1b9508f: sched: Rate-limit newidle
      Cc: <stable@vger.kernel.org> # 3.3.x: fd21073: sched: Fix affinity logic
      Cc: <stable@vger.kernel.org> # 3.3.x
-    Signed-off-by: Ingo Molnar <mingo@elte.hu>
+     Signed-off-by: Ingo Molnar <mingo@elte.hu>
 
-   The tag sequence has the meaning of:
+The tag sequence has the meaning of:
+
+.. code-block:: none
+
      git cherry-pick a1f84a3
      git cherry-pick 1b9508f
      git cherry-pick fd21073
@@ -93,12 +122,17 @@
 Also, some patches may have kernel version prerequisites.  This can be
 specified in the following format in the sign-off area:
 
+.. code-block:: none
+
      Cc: <stable@vger.kernel.org> # 3.3.x-
 
-   The tag has the meaning of:
+The tag has the meaning of:
+
+.. code-block:: none
+
      git cherry-pick <this commit>
 
-   For each "-stable" tree starting with the specified version.
+For each "-stable" tree starting with the specified version.
 
 Following the submission:
 
@@ -109,7 +143,8 @@
    other developers and by the relevant subsystem maintainer.
 
 
-Review cycle:
+Review cycle
+------------
 
  - When the -stable maintainers decide for a review cycle, the patches will be
    sent to the review committee, and the maintainer of the affected area of
@@ -125,17 +160,22 @@
    security kernel team, and not go through the normal review cycle.
    Contact the kernel security team for more details on this procedure.
 
-Trees:
+Trees
+-----
 
  - The queues of patches, for both completed versions and in progress
    versions can be found at:
+
 	http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git
+
  - The finalized and tagged releases of all stable kernels can be found
    in separate branches per version at:
+
 	http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git
 
 
-Review committee:
+Review committee
+----------------
 
  - This is made up of a number of kernel developers who have volunteered for
    this task, and a few that haven't.
diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt
index 8c7dd595..5724092 100644
--- a/Documentation/x86/x86_64/mm.txt
+++ b/Documentation/x86/x86_64/mm.txt
@@ -12,13 +12,13 @@
 ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole
 ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
 ... unused hole ...
-ffffec0000000000 - fffffc0000000000 (=44 bits) kasan shadow memory (16TB)
+ffffec0000000000 - fffffbffffffffff (=44 bits) kasan shadow memory (16TB)
 ... unused hole ...
 ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
 ... unused hole ...
-ffffffef00000000 - ffffffff00000000 (=64 GB) EFI region mapping space
+ffffffef00000000 - fffffffeffffffff (=64 GB) EFI region mapping space
 ... unused hole ...
-ffffffff80000000 - ffffffffa0000000 (=512 MB)  kernel text mapping, from phys 0
+ffffffff80000000 - ffffffff9fffffff (=512 MB)  kernel text mapping, from phys 0
 ffffffffa0000000 - ffffffffff5fffff (=1526 MB) module mapping space
 ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls
 ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
diff --git a/MAINTAINERS b/MAINTAINERS
index f6c3466..a4961b0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3139,7 +3139,7 @@
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git misc
 W:	http://coccinelle.lip6.fr/
 S:	Supported
-F:	Documentation/coccinelle.txt
+F:	Documentation/dev-tools/coccinelle.rst
 F:	scripts/coccinelle/
 F:	scripts/coccicheck
 
@@ -5148,7 +5148,7 @@
 M:	Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
 S:	Maintained
 F:	kernel/gcov/
-F:	Documentation/gcov.txt
+F:	Documentation/dev-tools/gcov.rst
 
 GDT SCSI DISK ARRAY CONTROLLER DRIVER
 M:	Achim Leubner <achim_leubner@adaptec.com>
@@ -5636,7 +5636,7 @@
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi.git
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-bus-hsi
-F:	Documentation/hsi.txt
+F:	Documentation/device-drivers/serial-interfaces.rst
 F:	drivers/hsi/
 F:	include/linux/hsi/
 F:	include/uapi/linux/hsi/
@@ -6617,7 +6617,7 @@
 S:	Maintained
 F:	arch/*/include/asm/kasan.h
 F:	arch/*/mm/kasan_init*
-F:	Documentation/kasan.txt
+F:	Documentation/dev-tools/kasan.rst
 F:	include/linux/kasan*.h
 F:	lib/test_kasan.c
 F:	mm/kasan/
@@ -6833,7 +6833,7 @@
 M:	Vegard Nossum <vegardno@ifi.uio.no>
 M:	Pekka Enberg <penberg@kernel.org>
 S:	Maintained
-F:	Documentation/kmemcheck.txt
+F:	Documentation/dev-tools/kmemcheck.rst
 F:	arch/x86/include/asm/kmemcheck.h
 F:	arch/x86/mm/kmemcheck/
 F:	include/linux/kmemcheck.h
@@ -6842,7 +6842,7 @@
 KMEMLEAK
 M:	Catalin Marinas <catalin.marinas@arm.com>
 S:	Maintained
-F:	Documentation/kmemleak.txt
+F:	Documentation/dev-tools/kmemleak.rst
 F:	include/linux/kmemleak.h
 F:	mm/kmemleak.c
 F:	mm/kmemleak-test.c
diff --git a/Makefile b/Makefile
index 80b8671..addb235 100644
--- a/Makefile
+++ b/Makefile
@@ -1425,7 +1425,7 @@
 
 # Documentation targets
 # ---------------------------------------------------------------------------
-DOC_TARGETS := xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs epubdocs cleandocs
+DOC_TARGETS := xmldocs sgmldocs psdocs latexdocs pdfdocs htmldocs mandocs installmandocs epubdocs cleandocs
 PHONY += $(DOC_TARGETS)
 $(DOC_TARGETS): scripts_basic FORCE
 	$(Q)$(MAKE) $(build)=scripts build_docproc build_check-lc_ctype
diff --git a/README b/README
index e8c8a6d..09f34f7 100644
--- a/README
+++ b/README
@@ -229,10 +229,6 @@
       under some circumstances lead to problems: probing for a
       nonexistent controller card may confuse your other controllers
 
-    - Compiling the kernel with "Processor type" set higher than 386
-      will result in a kernel that does NOT work on a 386.  The
-      kernel will detect this on bootup, and give up.
-
     - A kernel with math-emulation compiled in will still use the
       coprocessor if one is present: the math emulation will just
       never get used in that case.  The kernel will be slightly larger,
@@ -289,7 +285,7 @@
    LOCALVERSION can be set in the "General Setup" menu.
 
  - In order to boot your new kernel, you'll need to copy the kernel
-   image (e.g. .../linux/arch/i386/boot/bzImage after compilation)
+   image (e.g. .../linux/arch/x86/boot/bzImage after compilation)
    to the place where your regular bootable kernel is found.
 
  - Booting a kernel directly from a floppy without the assistance of a
@@ -391,7 +387,7 @@
 
  - Alternatively, you can use gdb on a running kernel. (read-only; i.e. you
    cannot change values or set break points.) To do this, first compile the
-   kernel with -g; edit arch/i386/Makefile appropriately, then do a "make
+   kernel with -g; edit arch/x86/Makefile appropriately, then do a "make
    clean". You'll also need to enable CONFIG_PROC_FS (via "make config").
 
    After you've rebooted with the new kernel, do "gdb vmlinux /proc/kcore".
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 4f2e904..93721f3 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -212,6 +212,7 @@
 my $type_constant = '\%([-_\w]+)';
 my $type_func = '(\w+)\(\)';
 my $type_param = '\@(\w+)';
+my $type_fp_param = '\@(\w+)\(\)';  # Special RST handling for func ptr params
 my $type_struct = '\&((struct\s*)*[_\w]+)';
 my $type_struct_xml = '\\&amp;((struct\s*)*[_\w]+)';
 my $type_env = '(\$\w+)';
@@ -292,6 +293,7 @@
                        # Note: need to escape () to avoid func matching later
                        [$type_member_func, "\\:c\\:type\\:`\$1\$2\\\\(\\\\) <\$1>`"],
                        [$type_member, "\\:c\\:type\\:`\$1\$2 <\$1>`"],
+		       [$type_fp_param, "**\$1\\\\(\\\\)**"],
                        [$type_func, "\\:c\\:func\\:`\$1()`"],
                        [$type_struct_full, "\\:c\\:type\\:`\$1 \$2 <\$2>`"],
                        [$type_enum_full, "\\:c\\:type\\:`\$1 \$2 <\$2>`"],
@@ -412,7 +414,7 @@
 my $doc_decl = $doc_com . '(\w+)';
 # @params and a strictly limited set of supported section names
 my $doc_sect = $doc_com . 
-    '\s*(\@\w+|description|context|returns?|notes?|examples?)\s*:(.*)';
+    '\s*(\@[.\w]+|\@\.\.\.|description|context|returns?|notes?|examples?)\s*:(.*)';
 my $doc_content = $doc_com_body . '(.*)';
 my $doc_block = $doc_com . 'DOC:\s*(.*)?';
 my $doc_inline_start = '^\s*/\*\*\s*$';
@@ -1831,13 +1833,22 @@
     my %args = %{$_[0]};
     my ($parameter, $section);
     my $oldprefix = $lineprefix;
-    my $start;
+    my $start = "";
 
-    print ".. c:function:: ";
-    if ($args{'functiontype'} ne "") {
-	$start = $args{'functiontype'} . " " . $args{'function'} . " (";
+    if ($args{'typedef'}) {
+	print ".. c:type:: ". $args{'function'} . "\n\n";
+	print_lineno($declaration_start_line);
+	print "   **Typedef**: ";
+	$lineprefix = "";
+	output_highlight_rst($args{'purpose'});
+	$start = "\n\n**Syntax**\n\n  ``";
     } else {
-	$start = $args{'function'} . " (";
+	print ".. c:function:: ";
+    }
+    if ($args{'functiontype'} ne "") {
+	$start .= $args{'functiontype'} . " " . $args{'function'} . " (";
+    } else {
+	$start .= $args{'function'} . " (";
     }
     print $start;
 
@@ -1849,9 +1860,6 @@
 	$count++;
 	$type = $args{'parametertypes'}{$parameter};
 
-	# RST doesn't like address_space tags at function prototypes
-	$type =~ s/__(user|kernel|iomem|percpu|pmem|rcu)\s*//;
-
 	if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) {
 	    # pointer-to-function
 	    print $1 . $parameter . ") (" . $2;
@@ -1859,11 +1867,15 @@
 	    print $type . " " . $parameter;
 	}
     }
-    print ")\n\n";
-    print_lineno($declaration_start_line);
-    $lineprefix = "   ";
-    output_highlight_rst($args{'purpose'});
-    print "\n";
+    if ($args{'typedef'}) {
+	print ");``\n\n";
+    } else {
+	print ")\n\n";
+	print_lineno($declaration_start_line);
+	$lineprefix = "   ";
+	output_highlight_rst($args{'purpose'});
+	print "\n";
+    }
 
     print "**Parameters**\n\n";
     $lineprefix = "  ";
@@ -2003,7 +2015,7 @@
 	($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next;
 	$type = $args{'parametertypes'}{$parameter};
         print_lineno($parameterdesc_start_lines{$parameter_name});
-	print "``$type $parameter``\n";
+	print "``" . $parameter . "``\n";
 	output_highlight_rst($args{'parameterdescs'}{$parameter_name});
 	print "\n";
     }
@@ -2193,7 +2205,9 @@
     $x =~ s@/\*.*?\*/@@gos;	# strip comments.
 
     # Parse function prototypes
-    if ($x =~ /typedef\s+(\w+)\s*\(\*\s*(\w\S+)\s*\)\s*\((.*)\);/) {
+    if ($x =~ /typedef\s+(\w+)\s*\(\*\s*(\w\S+)\s*\)\s*\((.*)\);/ ||
+	$x =~ /typedef\s+(\w+)\s*(\w\S+)\s*\s*\((.*)\);/) {
+
 	# Function typedefs
 	$return_type = $1;
 	$declaration_name = $2;
@@ -2204,6 +2218,7 @@
 	output_declaration($declaration_name,
 			   'function',
 			   {'function' => $declaration_name,
+			    'typedef' => 1,
 			    'module' => $modulename,
 			    'functiontype' => $return_type,
 			    'parameterlist' => \@parameterlist,
@@ -2338,6 +2353,7 @@
 
 	if ($type eq "" && $param =~ /\.\.\.$/)
 	{
+	    $param = "...";
 	    if (!defined $parameterdescs{$param} || $parameterdescs{$param} eq "") {
 		$parameterdescs{$param} = "variable arguments";
 	    }