cxgb4/iw_cxgb4: display TPTE on errors
With ingress WRITE or READ RESPONSE errors, HW provides the offending
stag from the packet. This patch adds logic to log the parsed TPTE
in this case. cxgb4 now exports a function to read a TPTE entry
from adapter memory.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 767cbba..ba7d13d 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -3832,6 +3832,72 @@
}
EXPORT_SYMBOL(cxgb4_enable_db_coalescing);
+int cxgb4_read_tpte(struct net_device *dev, u32 stag, __be32 *tpte)
+{
+ struct adapter *adap;
+ u32 offset, memtype, memaddr;
+ u32 edc0_size, edc1_size, mc0_size, mc1_size;
+ u32 edc0_end, edc1_end, mc0_end, mc1_end;
+ int ret;
+
+ adap = netdev2adap(dev);
+
+ offset = ((stag >> 8) * 32) + adap->vres.stag.start;
+
+ /* Figure out where the offset lands in the Memory Type/Address scheme.
+ * This code assumes that the memory is laid out starting at offset 0
+ * with no breaks as: EDC0, EDC1, MC0, MC1. All cards have both EDC0
+ * and EDC1. Some cards will have neither MC0 nor MC1, most cards have
+ * MC0, and some have both MC0 and MC1.
+ */
+ edc0_size = EDRAM_SIZE_GET(t4_read_reg(adap, MA_EDRAM0_BAR)) << 20;
+ edc1_size = EDRAM_SIZE_GET(t4_read_reg(adap, MA_EDRAM1_BAR)) << 20;
+ mc0_size = EXT_MEM_SIZE_GET(t4_read_reg(adap, MA_EXT_MEMORY_BAR)) << 20;
+
+ edc0_end = edc0_size;
+ edc1_end = edc0_end + edc1_size;
+ mc0_end = edc1_end + mc0_size;
+
+ if (offset < edc0_end) {
+ memtype = MEM_EDC0;
+ memaddr = offset;
+ } else if (offset < edc1_end) {
+ memtype = MEM_EDC1;
+ memaddr = offset - edc0_end;
+ } else {
+ if (offset < mc0_end) {
+ memtype = MEM_MC0;
+ memaddr = offset - edc1_end;
+ } else if (is_t4(adap->params.chip)) {
+ /* T4 only has a single memory channel */
+ goto err;
+ } else {
+ mc1_size = EXT_MEM_SIZE_GET(
+ t4_read_reg(adap,
+ MA_EXT_MEMORY1_BAR)) << 20;
+ mc1_end = mc0_end + mc1_size;
+ if (offset < mc1_end) {
+ memtype = MEM_MC1;
+ memaddr = offset - mc0_end;
+ } else {
+ /* offset beyond the end of any memory */
+ goto err;
+ }
+ }
+ }
+
+ spin_lock(&adap->win0_lock);
+ ret = t4_memory_rw(adap, 0, memtype, memaddr, 32, tpte, T4_MEMORY_READ);
+ spin_unlock(&adap->win0_lock);
+ return ret;
+
+err:
+ dev_err(adap->pdev_dev, "stag %#x, offset %#x out of range\n",
+ stag, offset);
+ return -EINVAL;
+}
+EXPORT_SYMBOL(cxgb4_read_tpte);
+
static struct pci_driver cxgb4_driver;
static void check_neigh_update(struct neighbour *neigh)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
index df1d944..c7170d6 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
@@ -296,5 +296,6 @@
int cxgb4_flush_eq_cache(struct net_device *dev);
void cxgb4_disable_db_coalescing(struct net_device *dev);
void cxgb4_enable_db_coalescing(struct net_device *dev);
+int cxgb4_read_tpte(struct net_device *dev, u32 stag, __be32 *tpte);
#endif /* !__CXGB4_OFLD_H */