| /* |
| * Fitipower FC0011 tuner driver |
| * |
| * Copyright (C) 2012 Michael Buesch <m@bues.ch> |
| * |
| * Derived from FC0012 tuner driver: |
| * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include "fc0011.h" |
| |
| |
| /* Tuner registers */ |
| enum { |
| FC11_REG_0, |
| FC11_REG_FA, /* FA */ |
| FC11_REG_FP, /* FP */ |
| FC11_REG_XINHI, /* XIN high 8 bit */ |
| FC11_REG_XINLO, /* XIN low 8 bit */ |
| FC11_REG_VCO, /* VCO */ |
| FC11_REG_VCOSEL, /* VCO select */ |
| FC11_REG_7, /* Unknown tuner reg 7 */ |
| FC11_REG_8, /* Unknown tuner reg 8 */ |
| FC11_REG_9, |
| FC11_REG_10, /* Unknown tuner reg 10 */ |
| FC11_REG_11, /* Unknown tuner reg 11 */ |
| FC11_REG_12, |
| FC11_REG_RCCAL, /* RC calibrate */ |
| FC11_REG_VCOCAL, /* VCO calibrate */ |
| FC11_REG_15, |
| FC11_REG_16, /* Unknown tuner reg 16 */ |
| FC11_REG_17, |
| |
| FC11_NR_REGS, /* Number of registers */ |
| }; |
| |
| enum FC11_REG_VCOSEL_bits { |
| FC11_VCOSEL_2 = 0x08, /* VCO select 2 */ |
| FC11_VCOSEL_1 = 0x10, /* VCO select 1 */ |
| FC11_VCOSEL_CLKOUT = 0x20, /* Fix clock out */ |
| FC11_VCOSEL_BW7M = 0x40, /* 7MHz bw */ |
| FC11_VCOSEL_BW6M = 0x80, /* 6MHz bw */ |
| }; |
| |
| enum FC11_REG_RCCAL_bits { |
| FC11_RCCAL_FORCE = 0x10, /* force */ |
| }; |
| |
| enum FC11_REG_VCOCAL_bits { |
| FC11_VCOCAL_RUN = 0, /* VCO calibration run */ |
| FC11_VCOCAL_VALUEMASK = 0x3F, /* VCO calibration value mask */ |
| FC11_VCOCAL_OK = 0x40, /* VCO calibration Ok */ |
| FC11_VCOCAL_RESET = 0x80, /* VCO calibration reset */ |
| }; |
| |
| |
| struct fc0011_priv { |
| struct i2c_adapter *i2c; |
| u8 addr; |
| |
| u32 frequency; |
| u32 bandwidth; |
| }; |
| |
| |
| static int fc0011_writereg(struct fc0011_priv *priv, u8 reg, u8 val) |
| { |
| u8 buf[2] = { reg, val }; |
| struct i2c_msg msg = { .addr = priv->addr, |
| .flags = 0, .buf = buf, .len = 2 }; |
| |
| if (i2c_transfer(priv->i2c, &msg, 1) != 1) { |
| dev_err(&priv->i2c->dev, |
| "I2C write reg failed, reg: %02x, val: %02x\n", |
| reg, val); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int fc0011_readreg(struct fc0011_priv *priv, u8 reg, u8 *val) |
| { |
| u8 dummy; |
| struct i2c_msg msg[2] = { |
| { .addr = priv->addr, |
| .flags = 0, .buf = ®, .len = 1 }, |
| { .addr = priv->addr, |
| .flags = I2C_M_RD, .buf = val ? : &dummy, .len = 1 }, |
| }; |
| |
| if (i2c_transfer(priv->i2c, msg, 2) != 2) { |
| dev_err(&priv->i2c->dev, |
| "I2C read failed, reg: %02x\n", reg); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int fc0011_release(struct dvb_frontend *fe) |
| { |
| kfree(fe->tuner_priv); |
| fe->tuner_priv = NULL; |
| |
| return 0; |
| } |
| |
| static int fc0011_init(struct dvb_frontend *fe) |
| { |
| struct fc0011_priv *priv = fe->tuner_priv; |
| int err; |
| |
| if (WARN_ON(!fe->callback)) |
| return -EINVAL; |
| |
| err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER, |
| FC0011_FE_CALLBACK_POWER, priv->addr); |
| if (err) { |
| dev_err(&priv->i2c->dev, "Power-on callback failed\n"); |
| return err; |
| } |
| err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER, |
| FC0011_FE_CALLBACK_RESET, priv->addr); |
| if (err) { |
| dev_err(&priv->i2c->dev, "Reset callback failed\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| /* Initiate VCO calibration */ |
| static int fc0011_vcocal_trigger(struct fc0011_priv *priv) |
| { |
| int err; |
| |
| err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RESET); |
| if (err) |
| return err; |
| err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN); |
| if (err) |
| return err; |
| |
| return 0; |
| } |
| |
| /* Read VCO calibration value */ |
| static int fc0011_vcocal_read(struct fc0011_priv *priv, u8 *value) |
| { |
| int err; |
| |
| err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN); |
| if (err) |
| return err; |
| usleep_range(10000, 20000); |
| err = fc0011_readreg(priv, FC11_REG_VCOCAL, value); |
| if (err) |
| return err; |
| |
| return 0; |
| } |
| |
| static int fc0011_set_params(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct fc0011_priv *priv = fe->tuner_priv; |
| int err; |
| unsigned int i, vco_retries; |
| u32 freq = p->frequency / 1000; |
| u32 bandwidth = p->bandwidth_hz / 1000; |
| u32 fvco, xin, frac, xdiv, xdivr; |
| u8 fa, fp, vco_sel, vco_cal; |
| u8 regs[FC11_NR_REGS] = { }; |
| |
| regs[FC11_REG_7] = 0x0F; |
| regs[FC11_REG_8] = 0x3E; |
| regs[FC11_REG_10] = 0xB8; |
| regs[FC11_REG_11] = 0x80; |
| regs[FC11_REG_RCCAL] = 0x04; |
| err = fc0011_writereg(priv, FC11_REG_7, regs[FC11_REG_7]); |
| err |= fc0011_writereg(priv, FC11_REG_8, regs[FC11_REG_8]); |
| err |= fc0011_writereg(priv, FC11_REG_10, regs[FC11_REG_10]); |
| err |= fc0011_writereg(priv, FC11_REG_11, regs[FC11_REG_11]); |
| err |= fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]); |
| if (err) |
| return -EIO; |
| |
| /* Set VCO freq and VCO div */ |
| if (freq < 54000) { |
| fvco = freq * 64; |
| regs[FC11_REG_VCO] = 0x82; |
| } else if (freq < 108000) { |
| fvco = freq * 32; |
| regs[FC11_REG_VCO] = 0x42; |
| } else if (freq < 216000) { |
| fvco = freq * 16; |
| regs[FC11_REG_VCO] = 0x22; |
| } else if (freq < 432000) { |
| fvco = freq * 8; |
| regs[FC11_REG_VCO] = 0x12; |
| } else { |
| fvco = freq * 4; |
| regs[FC11_REG_VCO] = 0x0A; |
| } |
| |
| /* Calc XIN. The PLL reference frequency is 18 MHz. */ |
| xdiv = fvco / 18000; |
| frac = fvco - xdiv * 18000; |
| frac = (frac << 15) / 18000; |
| if (frac >= 16384) |
| frac += 32786; |
| if (!frac) |
| xin = 0; |
| else |
| xin = clamp_t(u32, frac, 512, 65024); |
| regs[FC11_REG_XINHI] = xin >> 8; |
| regs[FC11_REG_XINLO] = xin; |
| |
| /* Calc FP and FA */ |
| xdivr = xdiv; |
| if (fvco - xdiv * 18000 >= 9000) |
| xdivr += 1; /* round */ |
| fp = xdivr / 8; |
| fa = xdivr - fp * 8; |
| if (fa < 2) { |
| fp -= 1; |
| fa += 8; |
| } |
| if (fp > 0x1F) { |
| fp = 0x1F; |
| fa = 0xF; |
| } |
| if (fa >= fp) { |
| dev_warn(&priv->i2c->dev, |
| "fa %02X >= fp %02X, but trying to continue\n", |
| (unsigned int)(u8)fa, (unsigned int)(u8)fp); |
| } |
| regs[FC11_REG_FA] = fa; |
| regs[FC11_REG_FP] = fp; |
| |
| /* Select bandwidth */ |
| switch (bandwidth) { |
| case 8000: |
| break; |
| case 7000: |
| regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW7M; |
| break; |
| default: |
| dev_warn(&priv->i2c->dev, "Unsupported bandwidth %u kHz. " |
| "Using 6000 kHz.\n", |
| bandwidth); |
| bandwidth = 6000; |
| /* fallthrough */ |
| case 6000: |
| regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW6M; |
| break; |
| } |
| |
| /* Pre VCO select */ |
| if (fvco < 2320000) { |
| vco_sel = 0; |
| regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); |
| } else if (fvco < 3080000) { |
| vco_sel = 1; |
| regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); |
| regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1; |
| } else { |
| vco_sel = 2; |
| regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); |
| regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2; |
| } |
| |
| /* Fix for low freqs */ |
| if (freq < 45000) { |
| regs[FC11_REG_FA] = 0x6; |
| regs[FC11_REG_FP] = 0x11; |
| } |
| |
| /* Clock out fix */ |
| regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_CLKOUT; |
| |
| /* Write the cached registers */ |
| for (i = FC11_REG_FA; i <= FC11_REG_VCOSEL; i++) { |
| err = fc0011_writereg(priv, i, regs[i]); |
| if (err) |
| return err; |
| } |
| |
| /* VCO calibration */ |
| err = fc0011_vcocal_trigger(priv); |
| if (err) |
| return err; |
| err = fc0011_vcocal_read(priv, &vco_cal); |
| if (err) |
| return err; |
| vco_retries = 0; |
| while (!(vco_cal & FC11_VCOCAL_OK) && vco_retries < 3) { |
| /* Reset the tuner and try again */ |
| err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER, |
| FC0011_FE_CALLBACK_RESET, priv->addr); |
| if (err) { |
| dev_err(&priv->i2c->dev, "Failed to reset tuner\n"); |
| return err; |
| } |
| /* Reinit tuner config */ |
| err = 0; |
| for (i = FC11_REG_FA; i <= FC11_REG_VCOSEL; i++) |
| err |= fc0011_writereg(priv, i, regs[i]); |
| err |= fc0011_writereg(priv, FC11_REG_7, regs[FC11_REG_7]); |
| err |= fc0011_writereg(priv, FC11_REG_8, regs[FC11_REG_8]); |
| err |= fc0011_writereg(priv, FC11_REG_10, regs[FC11_REG_10]); |
| err |= fc0011_writereg(priv, FC11_REG_11, regs[FC11_REG_11]); |
| err |= fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]); |
| if (err) |
| return -EIO; |
| /* VCO calibration */ |
| err = fc0011_vcocal_trigger(priv); |
| if (err) |
| return err; |
| err = fc0011_vcocal_read(priv, &vco_cal); |
| if (err) |
| return err; |
| vco_retries++; |
| } |
| if (!(vco_cal & FC11_VCOCAL_OK)) { |
| dev_err(&priv->i2c->dev, |
| "Failed to read VCO calibration value (got %02X)\n", |
| (unsigned int)vco_cal); |
| return -EIO; |
| } |
| vco_cal &= FC11_VCOCAL_VALUEMASK; |
| |
| switch (vco_sel) { |
| case 0: |
| if (vco_cal < 8) { |
| regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); |
| regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1; |
| err = fc0011_writereg(priv, FC11_REG_VCOSEL, |
| regs[FC11_REG_VCOSEL]); |
| if (err) |
| return err; |
| err = fc0011_vcocal_trigger(priv); |
| if (err) |
| return err; |
| } else { |
| regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); |
| err = fc0011_writereg(priv, FC11_REG_VCOSEL, |
| regs[FC11_REG_VCOSEL]); |
| if (err) |
| return err; |
| } |
| break; |
| case 1: |
| if (vco_cal < 5) { |
| regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); |
| regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2; |
| err = fc0011_writereg(priv, FC11_REG_VCOSEL, |
| regs[FC11_REG_VCOSEL]); |
| if (err) |
| return err; |
| err = fc0011_vcocal_trigger(priv); |
| if (err) |
| return err; |
| } else if (vco_cal <= 48) { |
| regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); |
| regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1; |
| err = fc0011_writereg(priv, FC11_REG_VCOSEL, |
| regs[FC11_REG_VCOSEL]); |
| if (err) |
| return err; |
| } else { |
| regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); |
| err = fc0011_writereg(priv, FC11_REG_VCOSEL, |
| regs[FC11_REG_VCOSEL]); |
| if (err) |
| return err; |
| err = fc0011_vcocal_trigger(priv); |
| if (err) |
| return err; |
| } |
| break; |
| case 2: |
| if (vco_cal > 53) { |
| regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); |
| regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1; |
| err = fc0011_writereg(priv, FC11_REG_VCOSEL, |
| regs[FC11_REG_VCOSEL]); |
| if (err) |
| return err; |
| err = fc0011_vcocal_trigger(priv); |
| if (err) |
| return err; |
| } else { |
| regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); |
| regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2; |
| err = fc0011_writereg(priv, FC11_REG_VCOSEL, |
| regs[FC11_REG_VCOSEL]); |
| if (err) |
| return err; |
| } |
| break; |
| } |
| err = fc0011_vcocal_read(priv, NULL); |
| if (err) |
| return err; |
| usleep_range(10000, 50000); |
| |
| err = fc0011_readreg(priv, FC11_REG_RCCAL, ®s[FC11_REG_RCCAL]); |
| if (err) |
| return err; |
| regs[FC11_REG_RCCAL] |= FC11_RCCAL_FORCE; |
| err = fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]); |
| if (err) |
| return err; |
| err = fc0011_writereg(priv, FC11_REG_16, 0xB); |
| if (err) |
| return err; |
| |
| dev_dbg(&priv->i2c->dev, "Tuned to " |
| "fa=%02X fp=%02X xin=%02X%02X vco=%02X vcosel=%02X " |
| "vcocal=%02X(%u) bw=%u\n", |
| (unsigned int)regs[FC11_REG_FA], |
| (unsigned int)regs[FC11_REG_FP], |
| (unsigned int)regs[FC11_REG_XINHI], |
| (unsigned int)regs[FC11_REG_XINLO], |
| (unsigned int)regs[FC11_REG_VCO], |
| (unsigned int)regs[FC11_REG_VCOSEL], |
| (unsigned int)vco_cal, vco_retries, |
| (unsigned int)bandwidth); |
| |
| priv->frequency = p->frequency; |
| priv->bandwidth = p->bandwidth_hz; |
| |
| return 0; |
| } |
| |
| static int fc0011_get_frequency(struct dvb_frontend *fe, u32 *frequency) |
| { |
| struct fc0011_priv *priv = fe->tuner_priv; |
| |
| *frequency = priv->frequency; |
| |
| return 0; |
| } |
| |
| static int fc0011_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) |
| { |
| *frequency = 0; |
| |
| return 0; |
| } |
| |
| static int fc0011_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) |
| { |
| struct fc0011_priv *priv = fe->tuner_priv; |
| |
| *bandwidth = priv->bandwidth; |
| |
| return 0; |
| } |
| |
| static const struct dvb_tuner_ops fc0011_tuner_ops = { |
| .info = { |
| .name = "Fitipower FC0011", |
| |
| .frequency_min = 45000000, |
| .frequency_max = 1000000000, |
| }, |
| |
| .release = fc0011_release, |
| .init = fc0011_init, |
| |
| .set_params = fc0011_set_params, |
| |
| .get_frequency = fc0011_get_frequency, |
| .get_if_frequency = fc0011_get_if_frequency, |
| .get_bandwidth = fc0011_get_bandwidth, |
| }; |
| |
| struct dvb_frontend *fc0011_attach(struct dvb_frontend *fe, |
| struct i2c_adapter *i2c, |
| const struct fc0011_config *config) |
| { |
| struct fc0011_priv *priv; |
| |
| priv = kzalloc(sizeof(struct fc0011_priv), GFP_KERNEL); |
| if (!priv) |
| return NULL; |
| |
| priv->i2c = i2c; |
| priv->addr = config->i2c_address; |
| |
| fe->tuner_priv = priv; |
| fe->ops.tuner_ops = fc0011_tuner_ops; |
| |
| dev_info(&priv->i2c->dev, "Fitipower FC0011 tuner attached\n"); |
| |
| return fe; |
| } |
| EXPORT_SYMBOL(fc0011_attach); |
| |
| MODULE_DESCRIPTION("Fitipower FC0011 silicon tuner driver"); |
| MODULE_AUTHOR("Michael Buesch <m@bues.ch>"); |
| MODULE_LICENSE("GPL"); |