blob: b1fc1c02792d4c3f89cb76a0dfb0f16f3dce2c47 [file] [log] [blame]
/******************************************************************************
*
* COPYRIGHT © 2014-2015 VMware, Inc., Palo Alto, CA., USA
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
* USE OR OTHER DEALINGS IN THE SOFTWARE.
*
******************************************************************************/
#include "vmwgfx_kms.h"
#include "device_include/svga3d_surfacedefs.h"
#include <drm/drm_plane_helper.h>
#define vmw_crtc_to_stdu(x) \
container_of(x, struct vmw_screen_target_display_unit, base.crtc)
#define vmw_encoder_to_stdu(x) \
container_of(x, struct vmw_screen_target_display_unit, base.encoder)
#define vmw_connector_to_stdu(x) \
container_of(x, struct vmw_screen_target_display_unit, base.connector)
enum stdu_content_type {
SAME_AS_DISPLAY = 0,
SEPARATE_SURFACE,
SEPARATE_DMA
};
/**
* struct vmw_stdu_dirty - closure structure for the update functions
*
* @base: The base type we derive from. Used by vmw_kms_helper_dirty().
* @transfer: Transfer direction for DMA command.
* @left: Left side of bounding box.
* @right: Right side of bounding box.
* @top: Top side of bounding box.
* @bottom: Bottom side of bounding box.
* @buf: DMA buffer when DMA-ing between buffer and screen targets.
* @sid: Surface ID when copying between surface and screen targets.
*/
struct vmw_stdu_dirty {
struct vmw_kms_dirty base;
SVGA3dTransferType transfer;
s32 left, right, top, bottom;
u32 pitch;
union {
struct vmw_dma_buffer *buf;
u32 sid;
};
};
/*
* SVGA commands that are used by this code. Please see the device headers
* for explanation.
*/
struct vmw_stdu_update {
SVGA3dCmdHeader header;
SVGA3dCmdUpdateGBScreenTarget body;
};
struct vmw_stdu_dma {
SVGA3dCmdHeader header;
SVGA3dCmdSurfaceDMA body;
};
struct vmw_stdu_surface_copy {
SVGA3dCmdHeader header;
SVGA3dCmdSurfaceCopy body;
};
/**
* struct vmw_screen_target_display_unit
*
* @base: VMW specific DU structure
* @display_srf: surface to be displayed. The dimension of this will always
* match the display mode. If the display mode matches
* content_vfbs dimensions, then this is a pointer into the
* corresponding field in content_vfbs. If not, then this
* is a separate buffer to which content_vfbs will blit to.
* @content_fb: holds the rendered content, can be a surface or DMA buffer
* @content_type: content_fb type
* @defined: true if the current display unit has been initialized
*/
struct vmw_screen_target_display_unit {
struct vmw_display_unit base;
struct vmw_surface *display_srf;
struct drm_framebuffer *content_fb;
enum stdu_content_type content_fb_type;
bool defined;
};
static void vmw_stdu_destroy(struct vmw_screen_target_display_unit *stdu);
/******************************************************************************
* Screen Target Display Unit helper Functions
*****************************************************************************/
/**
* vmw_stdu_pin_display - pins the resource associated with the display surface
*
* @stdu: contains the display surface
*
* Since the display surface can either be a private surface allocated by us,
* or it can point to the content surface, we use this function to not pin the
* same resource twice.
*/
static int vmw_stdu_pin_display(struct vmw_screen_target_display_unit *stdu)
{
return vmw_resource_pin(&stdu->display_srf->res, false);
}
/**
* vmw_stdu_unpin_display - unpins the resource associated with display surface
*
* @stdu: contains the display surface
*
* If the display surface was privatedly allocated by
* vmw_surface_gb_priv_define() and not registered as a framebuffer, then it
* won't be automatically cleaned up when all the framebuffers are freed. As
* such, we have to explicitly call vmw_resource_unreference() to get it freed.
*/
static void vmw_stdu_unpin_display(struct vmw_screen_target_display_unit *stdu)
{
if (stdu->display_srf) {
struct vmw_resource *res = &stdu->display_srf->res;
vmw_resource_unpin(res);
if (stdu->content_fb_type != SAME_AS_DISPLAY) {
vmw_resource_unreference(&res);
stdu->content_fb_type = SAME_AS_DISPLAY;
}
stdu->display_srf = NULL;
}
}
/******************************************************************************
* Screen Target Display Unit CRTC Functions
*****************************************************************************/
/**
* vmw_stdu_crtc_destroy - cleans up the STDU
*
* @crtc: used to get a reference to the containing STDU
*/
static void vmw_stdu_crtc_destroy(struct drm_crtc *crtc)
{
vmw_stdu_destroy(vmw_crtc_to_stdu(crtc));
}
/**
* vmw_stdu_define_st - Defines a Screen Target
*
* @dev_priv: VMW DRM device
* @stdu: display unit to create a Screen Target for
*
* Creates a STDU that we can used later. This function is called whenever the
* framebuffer size changes.
*
* RETURNs:
* 0 on success, error code on failure
*/
static int vmw_stdu_define_st(struct vmw_private *dev_priv,
struct vmw_screen_target_display_unit *stdu)
{
struct {
SVGA3dCmdHeader header;
SVGA3dCmdDefineGBScreenTarget body;
} *cmd;
cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
if (unlikely(cmd == NULL)) {
DRM_ERROR("Out of FIFO space defining Screen Target\n");
return -ENOMEM;
}
cmd->header.id = SVGA_3D_CMD_DEFINE_GB_SCREENTARGET;
cmd->header.size = sizeof(cmd->body);
cmd->body.stid = stdu->base.unit;
cmd->body.width = stdu->display_srf->base_size.width;
cmd->body.height = stdu->display_srf->base_size.height;
cmd->body.flags = (0 == cmd->body.stid) ? SVGA_STFLAG_PRIMARY : 0;
cmd->body.dpi = 0;
cmd->body.xRoot = stdu->base.crtc.x;
cmd->body.yRoot = stdu->base.crtc.y;
if (!stdu->base.is_implicit) {
cmd->body.xRoot = stdu->base.gui_x;
cmd->body.yRoot = stdu->base.gui_y;
}
vmw_fifo_commit(dev_priv, sizeof(*cmd));
stdu->defined = true;
return 0;
}
/**
* vmw_stdu_bind_st - Binds a surface to a Screen Target
*
* @dev_priv: VMW DRM device
* @stdu: display unit affected
* @res: Buffer to bind to the screen target. Set to NULL to blank screen.
*
* Binding a surface to a Screen Target the same as flipping
*/
static int vmw_stdu_bind_st(struct vmw_private *dev_priv,
struct vmw_screen_target_display_unit *stdu,
struct vmw_resource *res)
{
SVGA3dSurfaceImageId image;
struct {
SVGA3dCmdHeader header;
SVGA3dCmdBindGBScreenTarget body;
} *cmd;
if (!stdu->defined) {
DRM_ERROR("No screen target defined\n");
return -EINVAL;
}
/* Set up image using information in vfb */
memset(&image, 0, sizeof(image));
image.sid = res ? res->id : SVGA3D_INVALID_ID;
cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
if (unlikely(cmd == NULL)) {
DRM_ERROR("Out of FIFO space binding a screen target\n");
return -ENOMEM;
}
cmd->header.id = SVGA_3D_CMD_BIND_GB_SCREENTARGET;
cmd->header.size = sizeof(cmd->body);
cmd->body.stid = stdu->base.unit;
cmd->body.image = image;
vmw_fifo_commit(dev_priv, sizeof(*cmd));
return 0;
}
/**
* vmw_stdu_populate_update - populate an UPDATE_GB_SCREENTARGET command with a
* bounding box.
*
* @cmd: Pointer to command stream.
* @unit: Screen target unit.
* @left: Left side of bounding box.
* @right: Right side of bounding box.
* @top: Top side of bounding box.
* @bottom: Bottom side of bounding box.
*/
static void vmw_stdu_populate_update(void *cmd, int unit,
s32 left, s32 right, s32 top, s32 bottom)
{
struct vmw_stdu_update *update = cmd;
update->header.id = SVGA_3D_CMD_UPDATE_GB_SCREENTARGET;
update->header.size = sizeof(update->body);
update->body.stid = unit;
update->body.rect.x = left;
update->body.rect.y = top;
update->body.rect.w = right - left;
update->body.rect.h = bottom - top;
}
/**
* vmw_stdu_update_st - Full update of a Screen Target
*
* @dev_priv: VMW DRM device
* @stdu: display unit affected
*
* This function needs to be called whenever the content of a screen
* target has changed completely. Typically as a result of a backing
* surface change.
*
* RETURNS:
* 0 on success, error code on failure
*/
static int vmw_stdu_update_st(struct vmw_private *dev_priv,
struct vmw_screen_target_display_unit *stdu)
{
struct vmw_stdu_update *cmd;
struct drm_crtc *crtc = &stdu->base.crtc;
if (!stdu->defined) {
DRM_ERROR("No screen target defined");
return -EINVAL;
}
cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
if (unlikely(cmd == NULL)) {
DRM_ERROR("Out of FIFO space updating a Screen Target\n");
return -ENOMEM;
}
vmw_stdu_populate_update(cmd, stdu->base.unit, 0, crtc->mode.hdisplay,
0, crtc->mode.vdisplay);
vmw_fifo_commit(dev_priv, sizeof(*cmd));
return 0;
}
/**
* vmw_stdu_destroy_st - Destroy a Screen Target
*
* @dev_priv: VMW DRM device
* @stdu: display unit to destroy
*/
static int vmw_stdu_destroy_st(struct vmw_private *dev_priv,
struct vmw_screen_target_display_unit *stdu)
{
int ret;
struct {
SVGA3dCmdHeader header;
SVGA3dCmdDestroyGBScreenTarget body;
} *cmd;
/* Nothing to do if not successfully defined */
if (unlikely(!stdu->defined))
return 0;
cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
if (unlikely(cmd == NULL)) {
DRM_ERROR("Out of FIFO space, screen target not destroyed\n");
return -ENOMEM;
}
cmd->header.id = SVGA_3D_CMD_DESTROY_GB_SCREENTARGET;
cmd->header.size = sizeof(cmd->body);
cmd->body.stid = stdu->base.unit;
vmw_fifo_commit(dev_priv, sizeof(*cmd));
/* Force sync */
ret = vmw_fallback_wait(dev_priv, false, true, 0, false, 3*HZ);
if (unlikely(ret != 0))
DRM_ERROR("Failed to sync with HW");
stdu->defined = false;
return ret;
}
/**
* vmw_stdu_crtc_set_config - Sets a mode
*
* @set: mode parameters
*
* This function is the device-specific portion of the DRM CRTC mode set.
* For the SVGA device, we do this by defining a Screen Target, binding a
* GB Surface to that target, and finally update the screen target.
*
* RETURNS:
* 0 on success, error code otherwise
*/
static int vmw_stdu_crtc_set_config(struct drm_mode_set *set)
{
struct vmw_private *dev_priv;
struct vmw_screen_target_display_unit *stdu;
struct vmw_framebuffer *vfb;
struct vmw_framebuffer_surface *new_vfbs;
struct drm_display_mode *mode;
struct drm_framebuffer *new_fb;
struct drm_crtc *crtc;
struct drm_encoder *encoder;
struct drm_connector *connector;
int ret;
if (!set || !set->crtc)
return -EINVAL;
crtc = set->crtc;
crtc->x = set->x;
crtc->y = set->y;
stdu = vmw_crtc_to_stdu(crtc);
mode = set->mode;
new_fb = set->fb;
dev_priv = vmw_priv(crtc->dev);
if (set->num_connectors > 1) {
DRM_ERROR("Too many connectors\n");
return -EINVAL;
}
if (set->num_connectors == 1 &&
set->connectors[0] != &stdu->base.connector) {
DRM_ERROR("Connectors don't match %p %p\n",
set->connectors[0], &stdu->base.connector);
return -EINVAL;
}
/* Since they always map one to one these are safe */
connector = &stdu->base.connector;
encoder = &stdu->base.encoder;
/*
* After this point the CRTC will be considered off unless a new fb
* is bound
*/
if (stdu->defined) {
/* Unbind current surface by binding an invalid one */
ret = vmw_stdu_bind_st(dev_priv, stdu, NULL);
if (unlikely(ret != 0))
return ret;
/* Update Screen Target, display will now be blank */
if (crtc->primary->fb) {
vmw_stdu_update_st(dev_priv, stdu);
if (unlikely(ret != 0))
return ret;
}
crtc->primary->fb = NULL;
crtc->enabled = false;
encoder->crtc = NULL;
connector->encoder = NULL;
vmw_stdu_unpin_display(stdu);
stdu->content_fb = NULL;
stdu->content_fb_type = SAME_AS_DISPLAY;
ret = vmw_stdu_destroy_st(dev_priv, stdu);
/* The hardware is hung, give up */
if (unlikely(ret != 0))
return ret;
}
/* Any of these conditions means the caller wants CRTC off */
if (set->num_connectors == 0 || !mode || !new_fb)
return 0;
if (set->x + mode->hdisplay > new_fb->width ||
set->y + mode->vdisplay > new_fb->height) {
DRM_ERROR("Set outside of framebuffer\n");
return -EINVAL;
}
stdu->content_fb = new_fb;
vfb = vmw_framebuffer_to_vfb(stdu->content_fb);
if (vfb->dmabuf)
stdu->content_fb_type = SEPARATE_DMA;
/*
* If the requested mode is different than the width and height
* of the FB or if the content buffer is a DMA buf, then allocate
* a display FB that matches the dimension of the mode
*/
if (mode->hdisplay != new_fb->width ||
mode->vdisplay != new_fb->height ||
stdu->content_fb_type != SAME_AS_DISPLAY) {
struct vmw_surface content_srf;
struct drm_vmw_size display_base_size = {0};
struct vmw_surface *display_srf;
display_base_size.width = mode->hdisplay;
display_base_size.height = mode->vdisplay;
display_base_size.depth = 1;
/*
* If content buffer is a DMA buf, then we have to construct
* surface info
*/
if (stdu->content_fb_type == SEPARATE_DMA) {
switch (new_fb->bits_per_pixel) {
case 32:
content_srf.format = SVGA3D_X8R8G8B8;
break;
case 16:
content_srf.format = SVGA3D_R5G6B5;
break;
case 8:
content_srf.format = SVGA3D_P8;
break;
default:
DRM_ERROR("Invalid format\n");
ret = -EINVAL;
goto err_unref_content;
}
content_srf.flags = 0;
content_srf.mip_levels[0] = 1;
content_srf.multisample_count = 0;
} else {
stdu->content_fb_type = SEPARATE_SURFACE;
new_vfbs = vmw_framebuffer_to_vfbs(new_fb);
content_srf = *new_vfbs->surface;
}
ret = vmw_surface_gb_priv_define(crtc->dev,
0, /* because kernel visible only */
content_srf.flags,
content_srf.format,
true, /* a scanout buffer */
content_srf.mip_levels[0],
content_srf.multisample_count,
0,
display_base_size,
&display_srf);
if (unlikely(ret != 0)) {
DRM_ERROR("Cannot allocate a display FB.\n");
goto err_unref_content;
}
stdu->display_srf = display_srf;
} else {
new_vfbs = vmw_framebuffer_to_vfbs(new_fb);
stdu->display_srf = new_vfbs->surface;
}
ret = vmw_stdu_pin_display(stdu);
if (unlikely(ret != 0)) {
stdu->display_srf = NULL;
goto err_unref_content;
}
vmw_svga_enable(dev_priv);
/*
* Steps to displaying a surface, assume surface is already
* bound:
* 1. define a screen target
* 2. bind a fb to the screen target
* 3. update that screen target (this is done later by
* vmw_kms_stdu_do_surface_dirty_or_present)
*/
ret = vmw_stdu_define_st(dev_priv, stdu);
if (unlikely(ret != 0))
goto err_unpin_display_and_content;
ret = vmw_stdu_bind_st(dev_priv, stdu, &stdu->display_srf->res);
if (unlikely(ret != 0))
goto err_unpin_destroy_st;
connector->encoder = encoder;
encoder->crtc = crtc;
crtc->mode = *mode;
crtc->primary->fb = new_fb;
crtc->enabled = true;
return ret;
err_unpin_destroy_st:
vmw_stdu_destroy_st(dev_priv, stdu);
err_unpin_display_and_content:
vmw_stdu_unpin_display(stdu);
err_unref_content:
stdu->content_fb = NULL;
return ret;
}
/**
* vmw_stdu_crtc_page_flip - Binds a buffer to a screen target
*
* @crtc: CRTC to attach FB to
* @fb: FB to attach
* @event: Event to be posted. This event should've been alloced
* using k[mz]alloc, and should've been completely initialized.
* @page_flip_flags: Input flags.
*
* If the STDU uses the same display and content buffers, i.e. a true flip,
* this function will replace the existing display buffer with the new content
* buffer.
*
* If the STDU uses different display and content buffers, i.e. a blit, then
* only the content buffer will be updated.
*
* RETURNS:
* 0 on success, error code on failure
*/
static int vmw_stdu_crtc_page_flip(struct drm_crtc *crtc,
struct drm_framebuffer *new_fb,
struct drm_pending_vblank_event *event,
uint32_t flags)
{
struct vmw_private *dev_priv = vmw_priv(crtc->dev);
struct vmw_screen_target_display_unit *stdu;
int ret;
if (crtc == NULL)
return -EINVAL;
dev_priv = vmw_priv(crtc->dev);
stdu = vmw_crtc_to_stdu(crtc);
crtc->primary->fb = new_fb;
stdu->content_fb = new_fb;
if (stdu->display_srf) {
/*
* If the display surface is the same as the content surface
* then remove the reference
*/
if (stdu->content_fb_type == SAME_AS_DISPLAY) {
if (stdu->defined) {
/* Unbind the current surface */
ret = vmw_stdu_bind_st(dev_priv, stdu, NULL);
if (unlikely(ret != 0))
goto err_out;
}
vmw_stdu_unpin_display(stdu);
stdu->display_srf = NULL;
}
}
if (!new_fb) {
/* Blanks the display */
(void) vmw_stdu_update_st(dev_priv, stdu);
return 0;
}
if (stdu->content_fb_type == SAME_AS_DISPLAY) {
stdu->display_srf = vmw_framebuffer_to_vfbs(new_fb)->surface;
ret = vmw_stdu_pin_display(stdu);
if (ret) {
stdu->display_srf = NULL;
goto err_out;
}
/* Bind display surface */
ret = vmw_stdu_bind_st(dev_priv, stdu, &stdu->display_srf->res);
if (unlikely(ret != 0))
goto err_unpin_display_and_content;
}
/* Update display surface: after this point everything is bound */
ret = vmw_stdu_update_st(dev_priv, stdu);
if (unlikely(ret != 0))
return ret;
if (event) {
struct vmw_fence_obj *fence = NULL;
struct drm_file *file_priv = event->base.file_priv;
vmw_execbuf_fence_commands(NULL, dev_priv, &fence, NULL);
if (!fence)
return -ENOMEM;
ret = vmw_event_fence_action_queue(file_priv, fence,
&event->base,
&event->event.tv_sec,
&event->event.tv_usec,
true);
vmw_fence_obj_unreference(&fence);
} else {
vmw_fifo_flush(dev_priv, false);
}
return ret;
err_unpin_display_and_content:
vmw_stdu_unpin_display(stdu);
err_out:
crtc->primary->fb = NULL;
stdu->content_fb = NULL;
return ret;
}
/**
* vmw_stdu_dmabuf_clip - Callback to encode a suface DMA command cliprect
*
* @dirty: The closure structure.
*
* Encodes a surface DMA command cliprect and updates the bounding box
* for the DMA.
*/
static void vmw_stdu_dmabuf_clip(struct vmw_kms_dirty *dirty)
{
struct vmw_stdu_dirty *ddirty =
container_of(dirty, struct vmw_stdu_dirty, base);
struct vmw_stdu_dma *cmd = dirty->cmd;
struct SVGA3dCopyBox *blit = (struct SVGA3dCopyBox *) &cmd[1];
blit += dirty->num_hits;
blit->srcx = dirty->fb_x;
blit->srcy = dirty->fb_y;
blit->x = dirty->unit_x1;
blit->y = dirty->unit_y1;
blit->d = 1;
blit->w = dirty->unit_x2 - dirty->unit_x1;
blit->h = dirty->unit_y2 - dirty->unit_y1;
dirty->num_hits++;
if (ddirty->transfer != SVGA3D_WRITE_HOST_VRAM)
return;
/* Destination bounding box */
ddirty->left = min_t(s32, ddirty->left, dirty->unit_x1);
ddirty->top = min_t(s32, ddirty->top, dirty->unit_y1);
ddirty->right = max_t(s32, ddirty->right, dirty->unit_x2);
ddirty->bottom = max_t(s32, ddirty->bottom, dirty->unit_y2);
}
/**
* vmw_stdu_dmabuf_fifo_commit - Callback to fill in and submit a DMA command.
*
* @dirty: The closure structure.
*
* Fills in the missing fields in a DMA command, and optionally encodes
* a screen target update command, depending on transfer direction.
*/
static void vmw_stdu_dmabuf_fifo_commit(struct vmw_kms_dirty *dirty)
{
struct vmw_stdu_dirty *ddirty =
container_of(dirty, struct vmw_stdu_dirty, base);
struct vmw_screen_target_display_unit *stdu =
container_of(dirty->unit, typeof(*stdu), base);
struct vmw_stdu_dma *cmd = dirty->cmd;
struct SVGA3dCopyBox *blit = (struct SVGA3dCopyBox *) &cmd[1];
SVGA3dCmdSurfaceDMASuffix *suffix =
(SVGA3dCmdSurfaceDMASuffix *) &blit[dirty->num_hits];
size_t blit_size = sizeof(*blit) * dirty->num_hits + sizeof(*suffix);
if (!dirty->num_hits) {
vmw_fifo_commit(dirty->dev_priv, 0);
return;
}
cmd->header.id = SVGA_3D_CMD_SURFACE_DMA;
cmd->header.size = sizeof(cmd->body) + blit_size;
vmw_bo_get_guest_ptr(&ddirty->buf->base, &cmd->body.guest.ptr);
cmd->body.guest.pitch = ddirty->pitch;
cmd->body.host.sid = stdu->display_srf->res.id;
cmd->body.host.face = 0;
cmd->body.host.mipmap = 0;
cmd->body.transfer = ddirty->transfer;
suffix->suffixSize = sizeof(*suffix);
suffix->maximumOffset = ddirty->buf->base.num_pages * PAGE_SIZE;
if (ddirty->transfer == SVGA3D_WRITE_HOST_VRAM) {
blit_size += sizeof(struct vmw_stdu_update);
vmw_stdu_populate_update(&suffix[1], stdu->base.unit,
ddirty->left, ddirty->right,
ddirty->top, ddirty->bottom);
}
vmw_fifo_commit(dirty->dev_priv, sizeof(*cmd) + blit_size);
ddirty->left = ddirty->top = S32_MAX;
ddirty->right = ddirty->bottom = S32_MIN;
}
/**
* vmw_kms_stdu_dma - Perform a DMA transfer between a dma-buffer backed
* framebuffer and the screen target system.
*
* @dev_priv: Pointer to the device private structure.
* @file_priv: Pointer to a struct drm-file identifying the caller. May be
* set to NULL, but then @user_fence_rep must also be set to NULL.
* @vfb: Pointer to the dma-buffer backed framebuffer.
* @clips: Array of clip rects. Either @clips or @vclips must be NULL.
* @vclips: Alternate array of clip rects. Either @clips or @vclips must
* be NULL.
* @num_clips: Number of clip rects in @clips or @vclips.
* @increment: Increment to use when looping over @clips or @vclips.
* @to_surface: Whether to DMA to the screen target system as opposed to
* from the screen target system.
* @interruptible: Whether to perform waits interruptible if possible.
*
* If DMA-ing till the screen target system, the function will also notify
* the screen target system that a bounding box of the cliprects has been
* updated.
* Returns 0 on success, negative error code on failure. -ERESTARTSYS if
* interrupted.
*/
int vmw_kms_stdu_dma(struct vmw_private *dev_priv,
struct drm_file *file_priv,
struct vmw_framebuffer *vfb,
struct drm_vmw_fence_rep __user *user_fence_rep,
struct drm_clip_rect *clips,
struct drm_vmw_rect *vclips,
uint32_t num_clips,
int increment,
bool to_surface,
bool interruptible)
{
struct vmw_dma_buffer *buf =
container_of(vfb, struct vmw_framebuffer_dmabuf, base)->buffer;
struct vmw_stdu_dirty ddirty;
int ret;
ret = vmw_kms_helper_buffer_prepare(dev_priv, buf, interruptible,
false);
if (ret)
return ret;
ddirty.transfer = (to_surface) ? SVGA3D_WRITE_HOST_VRAM :
SVGA3D_READ_HOST_VRAM;
ddirty.left = ddirty.top = S32_MAX;
ddirty.right = ddirty.bottom = S32_MIN;
ddirty.pitch = vfb->base.pitches[0];
ddirty.buf = buf;
ddirty.base.fifo_commit = vmw_stdu_dmabuf_fifo_commit;
ddirty.base.clip = vmw_stdu_dmabuf_clip;
ddirty.base.fifo_reserve_size = sizeof(struct vmw_stdu_dma) +
num_clips * sizeof(SVGA3dCopyBox) +
sizeof(SVGA3dCmdSurfaceDMASuffix);
if (to_surface)
ddirty.base.fifo_reserve_size += sizeof(struct vmw_stdu_update);
ret = vmw_kms_helper_dirty(dev_priv, vfb, clips, vclips,
0, 0, num_clips, increment, &ddirty.base);
vmw_kms_helper_buffer_finish(dev_priv, file_priv, buf, NULL,
user_fence_rep);
return ret;
}
/**
* vmw_stdu_surface_clip - Callback to encode a surface copy command cliprect
*
* @dirty: The closure structure.
*
* Encodes a surface copy command cliprect and updates the bounding box
* for the copy.
*/
static void vmw_kms_stdu_surface_clip(struct vmw_kms_dirty *dirty)
{
struct vmw_stdu_dirty *sdirty =
container_of(dirty, struct vmw_stdu_dirty, base);
struct vmw_stdu_surface_copy *cmd = dirty->cmd;
struct vmw_screen_target_display_unit *stdu =
container_of(dirty->unit, typeof(*stdu), base);
if (sdirty->sid != stdu->display_srf->res.id) {
struct SVGA3dCopyBox *blit = (struct SVGA3dCopyBox *) &cmd[1];
blit += dirty->num_hits;
blit->srcx = dirty->fb_x;
blit->srcy = dirty->fb_y;
blit->x = dirty->unit_x1;
blit->y = dirty->unit_y1;
blit->d = 1;
blit->w = dirty->unit_x2 - dirty->unit_x1;
blit->h = dirty->unit_y2 - dirty->unit_y1;
}
dirty->num_hits++;
/* Destination bounding box */
sdirty->left = min_t(s32, sdirty->left, dirty->unit_x1);
sdirty->top = min_t(s32, sdirty->top, dirty->unit_y1);
sdirty->right = max_t(s32, sdirty->right, dirty->unit_x2);
sdirty->bottom = max_t(s32, sdirty->bottom, dirty->unit_y2);
}
/**
* vmw_stdu_surface_fifo_commit - Callback to fill in and submit a surface
* copy command.
*
* @dirty: The closure structure.
*
* Fills in the missing fields in a surface copy command, and encodes a screen
* target update command.
*/
static void vmw_kms_stdu_surface_fifo_commit(struct vmw_kms_dirty *dirty)
{
struct vmw_stdu_dirty *sdirty =
container_of(dirty, struct vmw_stdu_dirty, base);
struct vmw_screen_target_display_unit *stdu =
container_of(dirty->unit, typeof(*stdu), base);
struct vmw_stdu_surface_copy *cmd = dirty->cmd;
struct vmw_stdu_update *update;
size_t blit_size = sizeof(SVGA3dCopyBox) * dirty->num_hits;
size_t commit_size;
if (!dirty->num_hits) {
vmw_fifo_commit(dirty->dev_priv, 0);
return;
}
if (sdirty->sid != stdu->display_srf->res.id) {
struct SVGA3dCopyBox *blit = (struct SVGA3dCopyBox *) &cmd[1];
cmd->header.id = SVGA_3D_CMD_SURFACE_COPY;
cmd->header.size = sizeof(cmd->body) + blit_size;
cmd->body.src.sid = sdirty->sid;
cmd->body.dest.sid = stdu->display_srf->res.id;
update = (struct vmw_stdu_update *) &blit[dirty->num_hits];
commit_size = sizeof(*cmd) + blit_size + sizeof(*update);
} else {
update = dirty->cmd;
commit_size = sizeof(*update);
}
vmw_stdu_populate_update(update, stdu->base.unit, sdirty->left,
sdirty->right, sdirty->top, sdirty->bottom);
vmw_fifo_commit(dirty->dev_priv, commit_size);
sdirty->left = sdirty->top = S32_MAX;
sdirty->right = sdirty->bottom = S32_MIN;
}
/**
* vmw_kms_stdu_surface_dirty - Dirty part of a surface backed framebuffer
*
* @dev_priv: Pointer to the device private structure.
* @framebuffer: Pointer to the surface-buffer backed framebuffer.
* @clips: Array of clip rects. Either @clips or @vclips must be NULL.
* @vclips: Alternate array of clip rects. Either @clips or @vclips must
* be NULL.
* @srf: Pointer to surface to blit from. If NULL, the surface attached
* to @framebuffer will be used.
* @dest_x: X coordinate offset to align @srf with framebuffer coordinates.
* @dest_y: Y coordinate offset to align @srf with framebuffer coordinates.
* @num_clips: Number of clip rects in @clips.
* @inc: Increment to use when looping over @clips.
* @out_fence: If non-NULL, will return a ref-counted pointer to a
* struct vmw_fence_obj. The returned fence pointer may be NULL in which
* case the device has already synchronized.
*
* Returns 0 on success, negative error code on failure. -ERESTARTSYS if
* interrupted.
*/
int vmw_kms_stdu_surface_dirty(struct vmw_private *dev_priv,
struct vmw_framebuffer *framebuffer,
struct drm_clip_rect *clips,
struct drm_vmw_rect *vclips,
struct vmw_resource *srf,
s32 dest_x,
s32 dest_y,
unsigned num_clips, int inc,
struct vmw_fence_obj **out_fence)
{
struct vmw_framebuffer_surface *vfbs =
container_of(framebuffer, typeof(*vfbs), base);
struct vmw_stdu_dirty sdirty;
int ret;
if (!srf)
srf = &vfbs->surface->res;
ret = vmw_kms_helper_resource_prepare(srf, true);
if (ret)
return ret;
if (vfbs->is_dmabuf_proxy) {
ret = vmw_kms_update_proxy(srf, clips, num_clips, inc);
if (ret)
goto out_finish;
}
sdirty.base.fifo_commit = vmw_kms_stdu_surface_fifo_commit;
sdirty.base.clip = vmw_kms_stdu_surface_clip;
sdirty.base.fifo_reserve_size = sizeof(struct vmw_stdu_surface_copy) +
sizeof(SVGA3dCopyBox) * num_clips +
sizeof(struct vmw_stdu_update);
sdirty.sid = srf->id;
sdirty.left = sdirty.top = S32_MAX;
sdirty.right = sdirty.bottom = S32_MIN;
ret = vmw_kms_helper_dirty(dev_priv, framebuffer, clips, vclips,
dest_x, dest_y, num_clips, inc,
&sdirty.base);
out_finish:
vmw_kms_helper_resource_finish(srf, out_fence);
return ret;
}
/*
* Screen Target CRTC dispatch table
*/
static struct drm_crtc_funcs vmw_stdu_crtc_funcs = {
.save = vmw_du_crtc_save,
.restore = vmw_du_crtc_restore,
.cursor_set = vmw_du_crtc_cursor_set,
.cursor_move = vmw_du_crtc_cursor_move,
.gamma_set = vmw_du_crtc_gamma_set,
.destroy = vmw_stdu_crtc_destroy,
.set_config = vmw_stdu_crtc_set_config,
.page_flip = vmw_stdu_crtc_page_flip,
};
/******************************************************************************
* Screen Target Display Unit Encoder Functions
*****************************************************************************/
/**
* vmw_stdu_encoder_destroy - cleans up the STDU
*
* @encoder: used the get the containing STDU
*
* vmwgfx cleans up crtc/encoder/connector all at the same time so technically
* this can be a no-op. Nevertheless, it doesn't hurt of have this in case
* the common KMS code changes and somehow vmw_stdu_crtc_destroy() doesn't
* get called.
*/
static void vmw_stdu_encoder_destroy(struct drm_encoder *encoder)
{
vmw_stdu_destroy(vmw_encoder_to_stdu(encoder));
}
static struct drm_encoder_funcs vmw_stdu_encoder_funcs = {
.destroy = vmw_stdu_encoder_destroy,
};
/******************************************************************************
* Screen Target Display Unit Connector Functions
*****************************************************************************/
/**
* vmw_stdu_connector_destroy - cleans up the STDU
*
* @connector: used to get the containing STDU
*
* vmwgfx cleans up crtc/encoder/connector all at the same time so technically
* this can be a no-op. Nevertheless, it doesn't hurt of have this in case
* the common KMS code changes and somehow vmw_stdu_crtc_destroy() doesn't
* get called.
*/
static void vmw_stdu_connector_destroy(struct drm_connector *connector)
{
vmw_stdu_destroy(vmw_connector_to_stdu(connector));
}
static struct drm_connector_funcs vmw_stdu_connector_funcs = {
.dpms = vmw_du_connector_dpms,
.save = vmw_du_connector_save,
.restore = vmw_du_connector_restore,
.detect = vmw_du_connector_detect,
.fill_modes = vmw_du_connector_fill_modes,
.set_property = vmw_du_connector_set_property,
.destroy = vmw_stdu_connector_destroy,
};
/**
* vmw_stdu_init - Sets up a Screen Target Display Unit
*
* @dev_priv: VMW DRM device
* @unit: unit number range from 0 to VMWGFX_NUM_DISPLAY_UNITS
*
* This function is called once per CRTC, and allocates one Screen Target
* display unit to represent that CRTC. Since the SVGA device does not separate
* out encoder and connector, they are represented as part of the STDU as well.
*/
static int vmw_stdu_init(struct vmw_private *dev_priv, unsigned unit)
{
struct vmw_screen_target_display_unit *stdu;
struct drm_device *dev = dev_priv->dev;
struct drm_connector *connector;
struct drm_encoder *encoder;
struct drm_crtc *crtc;
stdu = kzalloc(sizeof(*stdu), GFP_KERNEL);
if (!stdu)
return -ENOMEM;
stdu->base.unit = unit;
crtc = &stdu->base.crtc;
encoder = &stdu->base.encoder;
connector = &stdu->base.connector;
stdu->base.pref_active = (unit == 0);
stdu->base.pref_width = dev_priv->initial_width;
stdu->base.pref_height = dev_priv->initial_height;
stdu->base.is_implicit = true;
drm_connector_init(dev, connector, &vmw_stdu_connector_funcs,
DRM_MODE_CONNECTOR_VIRTUAL);
connector->status = vmw_du_connector_detect(connector, false);
drm_encoder_init(dev, encoder, &vmw_stdu_encoder_funcs,
DRM_MODE_ENCODER_VIRTUAL);
drm_mode_connector_attach_encoder(connector, encoder);
encoder->possible_crtcs = (1 << unit);
encoder->possible_clones = 0;
(void) drm_connector_register(connector);
drm_crtc_init(dev, crtc, &vmw_stdu_crtc_funcs);
drm_mode_crtc_set_gamma_size(crtc, 256);
drm_object_attach_property(&connector->base,
dev->mode_config.dirty_info_property,
1);
return 0;
}
/**
* vmw_stdu_destroy - Cleans up a vmw_screen_target_display_unit
*
* @stdu: Screen Target Display Unit to be destroyed
*
* Clean up after vmw_stdu_init
*/
static void vmw_stdu_destroy(struct vmw_screen_target_display_unit *stdu)
{
vmw_stdu_unpin_display(stdu);
vmw_du_cleanup(&stdu->base);
kfree(stdu);
}
/******************************************************************************
* Screen Target Display KMS Functions
*
* These functions are called by the common KMS code in vmwgfx_kms.c
*****************************************************************************/
/**
* vmw_kms_stdu_init_display - Initializes a Screen Target based display
*
* @dev_priv: VMW DRM device
*
* This function initialize a Screen Target based display device. It checks
* the capability bits to make sure the underlying hardware can support
* screen targets, and then creates the maximum number of CRTCs, a.k.a Display
* Units, as supported by the display hardware.
*
* RETURNS:
* 0 on success, error code otherwise
*/
int vmw_kms_stdu_init_display(struct vmw_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
int i, ret;
/* Do nothing if Screen Target support is turned off */
if (!VMWGFX_ENABLE_SCREEN_TARGET_OTABLE)
return -ENOSYS;
if (!(dev_priv->capabilities & SVGA_CAP_GBOBJECTS))
return -ENOSYS;
ret = drm_vblank_init(dev, VMWGFX_NUM_DISPLAY_UNITS);
if (unlikely(ret != 0))
return ret;
ret = drm_mode_create_dirty_info_property(dev);
if (unlikely(ret != 0))
goto err_vblank_cleanup;
dev_priv->active_display_unit = vmw_du_screen_target;
for (i = 0; i < VMWGFX_NUM_DISPLAY_UNITS; ++i) {
ret = vmw_stdu_init(dev_priv, i);
if (unlikely(ret != 0)) {
DRM_ERROR("Failed to initialize STDU %d", i);
goto err_vblank_cleanup;
}
}
DRM_INFO("Screen Target Display device initialized\n");
return 0;
err_vblank_cleanup:
drm_vblank_cleanup(dev);
return ret;
}
/**
* vmw_kms_stdu_close_display - Cleans up after vmw_kms_stdu_init_display
*
* @dev_priv: VMW DRM device
*
* Frees up any resources allocated by vmw_kms_stdu_init_display
*
* RETURNS:
* 0 on success
*/
int vmw_kms_stdu_close_display(struct vmw_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
drm_vblank_cleanup(dev);
return 0;
}