| /* |
| pcf8575.c |
| |
| About the PCF8575 chip: the PCF8575 is a 16-bit I/O expander for the I2C bus |
| produced by a.o. Philips Semiconductors. |
| |
| Copyright (C) 2006 Michael Hennerich, Analog Devices Inc. |
| <hennerich@blackfin.uclinux.org> |
| Based on pcf8574.c. |
| |
| Copyright (c) 2007 Bart Van Assche <bart.vanassche@gmail.com>. |
| Ported this driver from ucLinux to the mainstream Linux kernel. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> /* kzalloc() */ |
| #include <linux/sysfs.h> /* sysfs_create_group() */ |
| |
| /* Addresses to scan: none, device can't be detected */ |
| static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; |
| |
| /* Insmod parameters */ |
| I2C_CLIENT_INSMOD; |
| |
| |
| /* Each client has this additional data */ |
| struct pcf8575_data { |
| int write; /* last written value, or error code */ |
| }; |
| |
| /* following are the sysfs callback functions */ |
| static ssize_t show_read(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| u16 val; |
| u8 iopin_state[2]; |
| |
| i2c_master_recv(client, iopin_state, 2); |
| |
| val = iopin_state[0]; |
| val |= iopin_state[1] << 8; |
| |
| return sprintf(buf, "%u\n", val); |
| } |
| |
| static DEVICE_ATTR(read, S_IRUGO, show_read, NULL); |
| |
| static ssize_t show_write(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct pcf8575_data *data = dev_get_drvdata(dev); |
| if (data->write < 0) |
| return data->write; |
| return sprintf(buf, "%d\n", data->write); |
| } |
| |
| static ssize_t set_write(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct pcf8575_data *data = i2c_get_clientdata(client); |
| unsigned long val = simple_strtoul(buf, NULL, 10); |
| u8 iopin_state[2]; |
| |
| if (val > 0xffff) |
| return -EINVAL; |
| |
| data->write = val; |
| |
| iopin_state[0] = val & 0xFF; |
| iopin_state[1] = val >> 8; |
| |
| i2c_master_send(client, iopin_state, 2); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write); |
| |
| static struct attribute *pcf8575_attributes[] = { |
| &dev_attr_read.attr, |
| &dev_attr_write.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group pcf8575_attr_group = { |
| .attrs = pcf8575_attributes, |
| }; |
| |
| /* |
| * Real code |
| */ |
| |
| /* Return 0 if detection is successful, -ENODEV otherwise */ |
| static int pcf8575_detect(struct i2c_client *client, int kind, |
| struct i2c_board_info *info) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) |
| return -ENODEV; |
| |
| /* This is the place to detect whether the chip at the specified |
| address really is a PCF8575 chip. However, there is no method known |
| to detect whether an I2C chip is a PCF8575 or any other I2C chip. */ |
| |
| strlcpy(info->type, "pcf8575", I2C_NAME_SIZE); |
| |
| return 0; |
| } |
| |
| static int pcf8575_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct pcf8575_data *data; |
| int err; |
| |
| data = kzalloc(sizeof(struct pcf8575_data), GFP_KERNEL); |
| if (!data) { |
| err = -ENOMEM; |
| goto exit; |
| } |
| |
| i2c_set_clientdata(client, data); |
| data->write = -EAGAIN; |
| |
| /* Register sysfs hooks */ |
| err = sysfs_create_group(&client->dev.kobj, &pcf8575_attr_group); |
| if (err) |
| goto exit_free; |
| |
| return 0; |
| |
| exit_free: |
| kfree(data); |
| exit: |
| return err; |
| } |
| |
| static int pcf8575_remove(struct i2c_client *client) |
| { |
| sysfs_remove_group(&client->dev.kobj, &pcf8575_attr_group); |
| kfree(i2c_get_clientdata(client)); |
| return 0; |
| } |
| |
| static const struct i2c_device_id pcf8575_id[] = { |
| { "pcf8575", 0 }, |
| { } |
| }; |
| |
| static struct i2c_driver pcf8575_driver = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "pcf8575", |
| }, |
| .probe = pcf8575_probe, |
| .remove = pcf8575_remove, |
| .id_table = pcf8575_id, |
| |
| .detect = pcf8575_detect, |
| .address_data = &addr_data, |
| }; |
| |
| static int __init pcf8575_init(void) |
| { |
| return i2c_add_driver(&pcf8575_driver); |
| } |
| |
| static void __exit pcf8575_exit(void) |
| { |
| i2c_del_driver(&pcf8575_driver); |
| } |
| |
| MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>, " |
| "Bart Van Assche <bart.vanassche@gmail.com>"); |
| MODULE_DESCRIPTION("pcf8575 driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(pcf8575_init); |
| module_exit(pcf8575_exit); |