| /* |
| * Driver for keys on GPIO lines capable of generating interrupts. |
| * |
| * Copyright 2005 Phil Blundell |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| |
| #include <linux/init.h> |
| #include <linux/fs.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/sched.h> |
| #include <linux/pm.h> |
| #include <linux/slab.h> |
| #include <linux/sysctl.h> |
| #include <linux/proc_fs.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/input.h> |
| #include <linux/gpio_keys.h> |
| #include <linux/workqueue.h> |
| #include <linux/gpio.h> |
| |
| struct gpio_button_data { |
| struct gpio_keys_button *button; |
| struct input_dev *input; |
| struct timer_list timer; |
| struct work_struct work; |
| int timer_debounce; /* in msecs */ |
| bool disabled; |
| }; |
| |
| struct gpio_keys_drvdata { |
| struct input_dev *input; |
| struct mutex disable_lock; |
| unsigned int n_buttons; |
| struct gpio_button_data data[0]; |
| }; |
| |
| /* |
| * SYSFS interface for enabling/disabling keys and switches: |
| * |
| * There are 4 attributes under /sys/devices/platform/gpio-keys/ |
| * keys [ro] - bitmap of keys (EV_KEY) which can be |
| * disabled |
| * switches [ro] - bitmap of switches (EV_SW) which can be |
| * disabled |
| * disabled_keys [rw] - bitmap of keys currently disabled |
| * disabled_switches [rw] - bitmap of switches currently disabled |
| * |
| * Userland can change these values and hence disable event generation |
| * for each key (or switch). Disabling a key means its interrupt line |
| * is disabled. |
| * |
| * For example, if we have following switches set up as gpio-keys: |
| * SW_DOCK = 5 |
| * SW_CAMERA_LENS_COVER = 9 |
| * SW_KEYPAD_SLIDE = 10 |
| * SW_FRONT_PROXIMITY = 11 |
| * This is read from switches: |
| * 11-9,5 |
| * Next we want to disable proximity (11) and dock (5), we write: |
| * 11,5 |
| * to file disabled_switches. Now proximity and dock IRQs are disabled. |
| * This can be verified by reading the file disabled_switches: |
| * 11,5 |
| * If we now want to enable proximity (11) switch we write: |
| * 5 |
| * to disabled_switches. |
| * |
| * We can disable only those keys which don't allow sharing the irq. |
| */ |
| |
| /** |
| * get_n_events_by_type() - returns maximum number of events per @type |
| * @type: type of button (%EV_KEY, %EV_SW) |
| * |
| * Return value of this function can be used to allocate bitmap |
| * large enough to hold all bits for given type. |
| */ |
| static inline int get_n_events_by_type(int type) |
| { |
| BUG_ON(type != EV_SW && type != EV_KEY); |
| |
| return (type == EV_KEY) ? KEY_CNT : SW_CNT; |
| } |
| |
| /** |
| * gpio_keys_disable_button() - disables given GPIO button |
| * @bdata: button data for button to be disabled |
| * |
| * Disables button pointed by @bdata. This is done by masking |
| * IRQ line. After this function is called, button won't generate |
| * input events anymore. Note that one can only disable buttons |
| * that don't share IRQs. |
| * |
| * Make sure that @bdata->disable_lock is locked when entering |
| * this function to avoid races when concurrent threads are |
| * disabling buttons at the same time. |
| */ |
| static void gpio_keys_disable_button(struct gpio_button_data *bdata) |
| { |
| if (!bdata->disabled) { |
| /* |
| * Disable IRQ and possible debouncing timer. |
| */ |
| disable_irq(gpio_to_irq(bdata->button->gpio)); |
| if (bdata->timer_debounce) |
| del_timer_sync(&bdata->timer); |
| |
| bdata->disabled = true; |
| } |
| } |
| |
| /** |
| * gpio_keys_enable_button() - enables given GPIO button |
| * @bdata: button data for button to be disabled |
| * |
| * Enables given button pointed by @bdata. |
| * |
| * Make sure that @bdata->disable_lock is locked when entering |
| * this function to avoid races with concurrent threads trying |
| * to enable the same button at the same time. |
| */ |
| static void gpio_keys_enable_button(struct gpio_button_data *bdata) |
| { |
| if (bdata->disabled) { |
| enable_irq(gpio_to_irq(bdata->button->gpio)); |
| bdata->disabled = false; |
| } |
| } |
| |
| /** |
| * gpio_keys_attr_show_helper() - fill in stringified bitmap of buttons |
| * @ddata: pointer to drvdata |
| * @buf: buffer where stringified bitmap is written |
| * @type: button type (%EV_KEY, %EV_SW) |
| * @only_disabled: does caller want only those buttons that are |
| * currently disabled or all buttons that can be |
| * disabled |
| * |
| * This function writes buttons that can be disabled to @buf. If |
| * @only_disabled is true, then @buf contains only those buttons |
| * that are currently disabled. Returns 0 on success or negative |
| * errno on failure. |
| */ |
| static ssize_t gpio_keys_attr_show_helper(struct gpio_keys_drvdata *ddata, |
| char *buf, unsigned int type, |
| bool only_disabled) |
| { |
| int n_events = get_n_events_by_type(type); |
| unsigned long *bits; |
| ssize_t ret; |
| int i; |
| |
| bits = kcalloc(BITS_TO_LONGS(n_events), sizeof(*bits), GFP_KERNEL); |
| if (!bits) |
| return -ENOMEM; |
| |
| for (i = 0; i < ddata->n_buttons; i++) { |
| struct gpio_button_data *bdata = &ddata->data[i]; |
| |
| if (bdata->button->type != type) |
| continue; |
| |
| if (only_disabled && !bdata->disabled) |
| continue; |
| |
| __set_bit(bdata->button->code, bits); |
| } |
| |
| ret = bitmap_scnlistprintf(buf, PAGE_SIZE - 2, bits, n_events); |
| buf[ret++] = '\n'; |
| buf[ret] = '\0'; |
| |
| kfree(bits); |
| |
| return ret; |
| } |
| |
| /** |
| * gpio_keys_attr_store_helper() - enable/disable buttons based on given bitmap |
| * @ddata: pointer to drvdata |
| * @buf: buffer from userspace that contains stringified bitmap |
| * @type: button type (%EV_KEY, %EV_SW) |
| * |
| * This function parses stringified bitmap from @buf and disables/enables |
| * GPIO buttons accordinly. Returns 0 on success and negative error |
| * on failure. |
| */ |
| static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata, |
| const char *buf, unsigned int type) |
| { |
| int n_events = get_n_events_by_type(type); |
| unsigned long *bits; |
| ssize_t error; |
| int i; |
| |
| bits = kcalloc(BITS_TO_LONGS(n_events), sizeof(*bits), GFP_KERNEL); |
| if (!bits) |
| return -ENOMEM; |
| |
| error = bitmap_parselist(buf, bits, n_events); |
| if (error) |
| goto out; |
| |
| /* First validate */ |
| for (i = 0; i < ddata->n_buttons; i++) { |
| struct gpio_button_data *bdata = &ddata->data[i]; |
| |
| if (bdata->button->type != type) |
| continue; |
| |
| if (test_bit(bdata->button->code, bits) && |
| !bdata->button->can_disable) { |
| error = -EINVAL; |
| goto out; |
| } |
| } |
| |
| mutex_lock(&ddata->disable_lock); |
| |
| for (i = 0; i < ddata->n_buttons; i++) { |
| struct gpio_button_data *bdata = &ddata->data[i]; |
| |
| if (bdata->button->type != type) |
| continue; |
| |
| if (test_bit(bdata->button->code, bits)) |
| gpio_keys_disable_button(bdata); |
| else |
| gpio_keys_enable_button(bdata); |
| } |
| |
| mutex_unlock(&ddata->disable_lock); |
| |
| out: |
| kfree(bits); |
| return error; |
| } |
| |
| #define ATTR_SHOW_FN(name, type, only_disabled) \ |
| static ssize_t gpio_keys_show_##name(struct device *dev, \ |
| struct device_attribute *attr, \ |
| char *buf) \ |
| { \ |
| struct platform_device *pdev = to_platform_device(dev); \ |
| struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev); \ |
| \ |
| return gpio_keys_attr_show_helper(ddata, buf, \ |
| type, only_disabled); \ |
| } |
| |
| ATTR_SHOW_FN(keys, EV_KEY, false); |
| ATTR_SHOW_FN(switches, EV_SW, false); |
| ATTR_SHOW_FN(disabled_keys, EV_KEY, true); |
| ATTR_SHOW_FN(disabled_switches, EV_SW, true); |
| |
| /* |
| * ATTRIBUTES: |
| * |
| * /sys/devices/platform/gpio-keys/keys [ro] |
| * /sys/devices/platform/gpio-keys/switches [ro] |
| */ |
| static DEVICE_ATTR(keys, S_IRUGO, gpio_keys_show_keys, NULL); |
| static DEVICE_ATTR(switches, S_IRUGO, gpio_keys_show_switches, NULL); |
| |
| #define ATTR_STORE_FN(name, type) \ |
| static ssize_t gpio_keys_store_##name(struct device *dev, \ |
| struct device_attribute *attr, \ |
| const char *buf, \ |
| size_t count) \ |
| { \ |
| struct platform_device *pdev = to_platform_device(dev); \ |
| struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev); \ |
| ssize_t error; \ |
| \ |
| error = gpio_keys_attr_store_helper(ddata, buf, type); \ |
| if (error) \ |
| return error; \ |
| \ |
| return count; \ |
| } |
| |
| ATTR_STORE_FN(disabled_keys, EV_KEY); |
| ATTR_STORE_FN(disabled_switches, EV_SW); |
| |
| /* |
| * ATTRIBUTES: |
| * |
| * /sys/devices/platform/gpio-keys/disabled_keys [rw] |
| * /sys/devices/platform/gpio-keys/disables_switches [rw] |
| */ |
| static DEVICE_ATTR(disabled_keys, S_IWUSR | S_IRUGO, |
| gpio_keys_show_disabled_keys, |
| gpio_keys_store_disabled_keys); |
| static DEVICE_ATTR(disabled_switches, S_IWUSR | S_IRUGO, |
| gpio_keys_show_disabled_switches, |
| gpio_keys_store_disabled_switches); |
| |
| static struct attribute *gpio_keys_attrs[] = { |
| &dev_attr_keys.attr, |
| &dev_attr_switches.attr, |
| &dev_attr_disabled_keys.attr, |
| &dev_attr_disabled_switches.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group gpio_keys_attr_group = { |
| .attrs = gpio_keys_attrs, |
| }; |
| |
| static void gpio_keys_report_event(struct gpio_button_data *bdata) |
| { |
| struct gpio_keys_button *button = bdata->button; |
| struct input_dev *input = bdata->input; |
| unsigned int type = button->type ?: EV_KEY; |
| int state = (gpio_get_value(button->gpio) ? 1 : 0) ^ button->active_low; |
| |
| input_event(input, type, button->code, !!state); |
| input_sync(input); |
| } |
| |
| static void gpio_keys_work_func(struct work_struct *work) |
| { |
| struct gpio_button_data *bdata = |
| container_of(work, struct gpio_button_data, work); |
| |
| gpio_keys_report_event(bdata); |
| } |
| |
| static void gpio_keys_timer(unsigned long _data) |
| { |
| struct gpio_button_data *data = (struct gpio_button_data *)_data; |
| |
| schedule_work(&data->work); |
| } |
| |
| static irqreturn_t gpio_keys_isr(int irq, void *dev_id) |
| { |
| struct gpio_button_data *bdata = dev_id; |
| struct gpio_keys_button *button = bdata->button; |
| |
| BUG_ON(irq != gpio_to_irq(button->gpio)); |
| |
| if (bdata->timer_debounce) |
| mod_timer(&bdata->timer, |
| jiffies + msecs_to_jiffies(bdata->timer_debounce)); |
| else |
| schedule_work(&bdata->work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int __devinit gpio_keys_setup_key(struct platform_device *pdev, |
| struct gpio_button_data *bdata, |
| struct gpio_keys_button *button) |
| { |
| char *desc = button->desc ? button->desc : "gpio_keys"; |
| struct device *dev = &pdev->dev; |
| unsigned long irqflags; |
| int irq, error; |
| |
| setup_timer(&bdata->timer, gpio_keys_timer, (unsigned long)bdata); |
| INIT_WORK(&bdata->work, gpio_keys_work_func); |
| |
| error = gpio_request(button->gpio, desc); |
| if (error < 0) { |
| dev_err(dev, "failed to request GPIO %d, error %d\n", |
| button->gpio, error); |
| goto fail2; |
| } |
| |
| error = gpio_direction_input(button->gpio); |
| if (error < 0) { |
| dev_err(dev, "failed to configure" |
| " direction for GPIO %d, error %d\n", |
| button->gpio, error); |
| goto fail3; |
| } |
| |
| if (button->debounce_interval) { |
| error = gpio_set_debounce(button->gpio, |
| button->debounce_interval * 1000); |
| /* use timer if gpiolib doesn't provide debounce */ |
| if (error < 0) |
| bdata->timer_debounce = button->debounce_interval; |
| } |
| |
| irq = gpio_to_irq(button->gpio); |
| if (irq < 0) { |
| error = irq; |
| dev_err(dev, "Unable to get irq number for GPIO %d, error %d\n", |
| button->gpio, error); |
| goto fail3; |
| } |
| |
| irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING; |
| /* |
| * If platform has specified that the button can be disabled, |
| * we don't want it to share the interrupt line. |
| */ |
| if (!button->can_disable) |
| irqflags |= IRQF_SHARED; |
| |
| error = request_irq(irq, gpio_keys_isr, irqflags, desc, bdata); |
| if (error) { |
| dev_err(dev, "Unable to claim irq %d; error %d\n", |
| irq, error); |
| goto fail3; |
| } |
| |
| return 0; |
| |
| fail3: |
| gpio_free(button->gpio); |
| fail2: |
| return error; |
| } |
| |
| static int __devinit gpio_keys_probe(struct platform_device *pdev) |
| { |
| struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; |
| struct gpio_keys_drvdata *ddata; |
| struct device *dev = &pdev->dev; |
| struct input_dev *input; |
| int i, error; |
| int wakeup = 0; |
| |
| ddata = kzalloc(sizeof(struct gpio_keys_drvdata) + |
| pdata->nbuttons * sizeof(struct gpio_button_data), |
| GFP_KERNEL); |
| input = input_allocate_device(); |
| if (!ddata || !input) { |
| dev_err(dev, "failed to allocate state\n"); |
| error = -ENOMEM; |
| goto fail1; |
| } |
| |
| ddata->input = input; |
| ddata->n_buttons = pdata->nbuttons; |
| mutex_init(&ddata->disable_lock); |
| |
| platform_set_drvdata(pdev, ddata); |
| |
| input->name = pdev->name; |
| input->phys = "gpio-keys/input0"; |
| input->dev.parent = &pdev->dev; |
| |
| input->id.bustype = BUS_HOST; |
| input->id.vendor = 0x0001; |
| input->id.product = 0x0001; |
| input->id.version = 0x0100; |
| |
| /* Enable auto repeat feature of Linux input subsystem */ |
| if (pdata->rep) |
| __set_bit(EV_REP, input->evbit); |
| |
| for (i = 0; i < pdata->nbuttons; i++) { |
| struct gpio_keys_button *button = &pdata->buttons[i]; |
| struct gpio_button_data *bdata = &ddata->data[i]; |
| unsigned int type = button->type ?: EV_KEY; |
| |
| bdata->input = input; |
| bdata->button = button; |
| |
| error = gpio_keys_setup_key(pdev, bdata, button); |
| if (error) |
| goto fail2; |
| |
| if (button->wakeup) |
| wakeup = 1; |
| |
| input_set_capability(input, type, button->code); |
| } |
| |
| error = sysfs_create_group(&pdev->dev.kobj, &gpio_keys_attr_group); |
| if (error) { |
| dev_err(dev, "Unable to export keys/switches, error: %d\n", |
| error); |
| goto fail2; |
| } |
| |
| error = input_register_device(input); |
| if (error) { |
| dev_err(dev, "Unable to register input device, error: %d\n", |
| error); |
| goto fail3; |
| } |
| |
| /* get current state of buttons */ |
| for (i = 0; i < pdata->nbuttons; i++) |
| gpio_keys_report_event(&ddata->data[i]); |
| input_sync(input); |
| |
| device_init_wakeup(&pdev->dev, wakeup); |
| |
| return 0; |
| |
| fail3: |
| sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group); |
| fail2: |
| while (--i >= 0) { |
| free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]); |
| if (ddata->data[i].timer_debounce) |
| del_timer_sync(&ddata->data[i].timer); |
| cancel_work_sync(&ddata->data[i].work); |
| gpio_free(pdata->buttons[i].gpio); |
| } |
| |
| platform_set_drvdata(pdev, NULL); |
| fail1: |
| input_free_device(input); |
| kfree(ddata); |
| |
| return error; |
| } |
| |
| static int __devexit gpio_keys_remove(struct platform_device *pdev) |
| { |
| struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; |
| struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev); |
| struct input_dev *input = ddata->input; |
| int i; |
| |
| sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group); |
| |
| device_init_wakeup(&pdev->dev, 0); |
| |
| for (i = 0; i < pdata->nbuttons; i++) { |
| int irq = gpio_to_irq(pdata->buttons[i].gpio); |
| free_irq(irq, &ddata->data[i]); |
| if (ddata->data[i].timer_debounce) |
| del_timer_sync(&ddata->data[i].timer); |
| cancel_work_sync(&ddata->data[i].work); |
| gpio_free(pdata->buttons[i].gpio); |
| } |
| |
| input_unregister_device(input); |
| |
| return 0; |
| } |
| |
| |
| #ifdef CONFIG_PM |
| static int gpio_keys_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; |
| int i; |
| |
| if (device_may_wakeup(&pdev->dev)) { |
| for (i = 0; i < pdata->nbuttons; i++) { |
| struct gpio_keys_button *button = &pdata->buttons[i]; |
| if (button->wakeup) { |
| int irq = gpio_to_irq(button->gpio); |
| enable_irq_wake(irq); |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int gpio_keys_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev); |
| struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; |
| int i; |
| |
| for (i = 0; i < pdata->nbuttons; i++) { |
| |
| struct gpio_keys_button *button = &pdata->buttons[i]; |
| if (button->wakeup && device_may_wakeup(&pdev->dev)) { |
| int irq = gpio_to_irq(button->gpio); |
| disable_irq_wake(irq); |
| } |
| |
| gpio_keys_report_event(&ddata->data[i]); |
| } |
| input_sync(ddata->input); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops gpio_keys_pm_ops = { |
| .suspend = gpio_keys_suspend, |
| .resume = gpio_keys_resume, |
| }; |
| #endif |
| |
| static struct platform_driver gpio_keys_device_driver = { |
| .probe = gpio_keys_probe, |
| .remove = __devexit_p(gpio_keys_remove), |
| .driver = { |
| .name = "gpio-keys", |
| .owner = THIS_MODULE, |
| #ifdef CONFIG_PM |
| .pm = &gpio_keys_pm_ops, |
| #endif |
| } |
| }; |
| |
| static int __init gpio_keys_init(void) |
| { |
| return platform_driver_register(&gpio_keys_device_driver); |
| } |
| |
| static void __exit gpio_keys_exit(void) |
| { |
| platform_driver_unregister(&gpio_keys_device_driver); |
| } |
| |
| module_init(gpio_keys_init); |
| module_exit(gpio_keys_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>"); |
| MODULE_DESCRIPTION("Keyboard driver for CPU GPIOs"); |
| MODULE_ALIAS("platform:gpio-keys"); |