blob: 323041fd41dc19c20ce88e4ae370272cbe09ea97 [file] [log] [blame]
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2005 Silicon Graphics, Inc. All rights reserved.
*
* This work was based on the 2.4/2.6 kernel development by Dick Reigner.
* Work to add BIOS PROM support was completed by Mike Habeck.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/proc_fs.h>
#include <linux/types.h>
#include <asm/sn/addrs.h>
#include <asm/sn/l1.h>
#include <asm/sn/module.h>
#include <asm/sn/pcibr_provider.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/pcidev.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/types.h>
#include "../pci.h"
#include "pci_hotplug.h"
MODULE_LICENSE("GPL");
MODULE_AUTHOR("SGI (prarit@sgi.com, dickie@sgi.com, habeck@sgi.com)");
MODULE_DESCRIPTION("SGI Altix Hot Plug PCI Controller Driver");
#define PCIIO_ASIC_TYPE_TIOCA 4
#define PCI_SLOT_ALREADY_UP 2 /* slot already up */
#define PCI_SLOT_ALREADY_DOWN 3 /* slot already down */
#define PCI_L1_ERR 7 /* L1 console command error */
#define PCI_EMPTY_33MHZ 15 /* empty 33 MHz bus */
#define PCI_L1_QSIZE 128 /* our L1 message buffer size */
#define SN_MAX_HP_SLOTS 32 /* max number of hotplug slots */
#define SGI_HOTPLUG_PROM_REV 0x0420 /* Min. required PROM version */
/* internal list head */
static struct list_head sn_hp_list;
/* hotplug_slot struct's private pointer */
struct slot {
int device_num;
struct pci_bus *pci_bus;
/* this struct for glue internal only */
struct hotplug_slot *hotplug_slot;
struct list_head hp_list;
};
struct pcibr_slot_enable_resp {
int resp_sub_errno;
char resp_l1_msg[PCI_L1_QSIZE + 1];
};
struct pcibr_slot_disable_resp {
int resp_sub_errno;
char resp_l1_msg[PCI_L1_QSIZE + 1];
};
enum sn_pci_req_e {
PCI_REQ_SLOT_ELIGIBLE,
PCI_REQ_SLOT_DISABLE
};
static int enable_slot(struct hotplug_slot *slot);
static int disable_slot(struct hotplug_slot *slot);
static int get_power_status(struct hotplug_slot *slot, u8 *value);
static struct hotplug_slot_ops sn_hotplug_slot_ops = {
.owner = THIS_MODULE,
.enable_slot = enable_slot,
.disable_slot = disable_slot,
.get_power_status = get_power_status,
};
static DECLARE_MUTEX(sn_hotplug_sem);
static int sn_pci_slot_valid(struct pci_bus *pci_bus, int device)
{
struct pcibus_info *pcibus_info;
int bricktype;
int bus_num;
pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus);
/* Check to see if this is a valid slot on 'pci_bus' */
if (!(pcibus_info->pbi_valid_devices & (1 << device)))
return -EPERM;
bricktype = MODULE_GET_BTYPE(pcibus_info->pbi_moduleid);
bus_num = pcibus_info->pbi_buscommon.bs_persist_busnum & 0xf;
/* Do not allow hotplug operations on base I/O cards */
if ((bricktype == L1_BRICKTYPE_IX || bricktype == L1_BRICKTYPE_IA) &&
(bus_num == 1 && device != 1))
return -EPERM;
return 1;
}
static int sn_pci_bus_valid(struct pci_bus *pci_bus)
{
struct pcibus_info *pcibus_info;
int asic_type;
int bricktype;
pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus);
/* Don't register slots hanging off the TIOCA bus */
asic_type = pcibus_info->pbi_buscommon.bs_asic_type;
if (asic_type == PCIIO_ASIC_TYPE_TIOCA)
return -EPERM;
/* Only register slots in I/O Bricks that support hotplug */
bricktype = MODULE_GET_BTYPE(pcibus_info->pbi_moduleid);
switch (bricktype) {
case L1_BRICKTYPE_IX:
case L1_BRICKTYPE_PX:
case L1_BRICKTYPE_IA:
case L1_BRICKTYPE_PA:
return 1;
break;
default:
return -EPERM;
break;
}
return -EIO;
}
static int sn_hp_slot_private_alloc(struct hotplug_slot *bss_hotplug_slot,
struct pci_bus *pci_bus, int device)
{
struct pcibus_info *pcibus_info;
struct slot *slot;
pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus);
bss_hotplug_slot->private = kcalloc(1, sizeof(struct slot),
GFP_KERNEL);
if (!bss_hotplug_slot->private)
return -ENOMEM;
slot = (struct slot *)bss_hotplug_slot->private;
bss_hotplug_slot->name = kmalloc(33, GFP_KERNEL);
if (!bss_hotplug_slot->name) {
kfree(bss_hotplug_slot->private);
return -ENOMEM;
}
slot->device_num = device;
slot->pci_bus = pci_bus;
sprintf(bss_hotplug_slot->name, "module_%c%c%c%c%.2d_b_%d_s_%d",
'0'+RACK_GET_CLASS(MODULE_GET_RACK(pcibus_info->pbi_moduleid)),
'0'+RACK_GET_GROUP(MODULE_GET_RACK(pcibus_info->pbi_moduleid)),
'0'+RACK_GET_NUM(MODULE_GET_RACK(pcibus_info->pbi_moduleid)),
MODULE_GET_BTCHAR(pcibus_info->pbi_moduleid),
MODULE_GET_BPOS(pcibus_info->pbi_moduleid),
((int)pcibus_info->pbi_buscommon.bs_persist_busnum) & 0xf,
device + 1);
slot->hotplug_slot = bss_hotplug_slot;
list_add(&slot->hp_list, &sn_hp_list);
return 0;
}
static struct hotplug_slot * sn_hp_destroy(void)
{
struct slot *slot;
struct list_head *list;
struct hotplug_slot *bss_hotplug_slot = NULL;
list_for_each(list, &sn_hp_list) {
slot = list_entry(list, struct slot, hp_list);
bss_hotplug_slot = slot->hotplug_slot;
list_del(&((struct slot *)bss_hotplug_slot->private)->
hp_list);
break;
}
return bss_hotplug_slot;
}
static void sn_bus_alloc_data(struct pci_dev *dev)
{
struct list_head *node;
struct pci_bus *subordinate_bus;
struct pci_dev *child;
sn_pci_fixup_slot(dev);
/* Recursively sets up the sn_irq_info structs */
if (dev->subordinate) {
subordinate_bus = dev->subordinate;
list_for_each(node, &subordinate_bus->devices) {
child = list_entry(node, struct pci_dev, bus_list);
sn_bus_alloc_data(child);
}
}
}
static void sn_bus_free_data(struct pci_dev *dev)
{
struct list_head *node;
struct pci_bus *subordinate_bus;
struct pci_dev *child;
/* Recursively clean up sn_irq_info structs */
if (dev->subordinate) {
subordinate_bus = dev->subordinate;
list_for_each(node, &subordinate_bus->devices) {
child = list_entry(node, struct pci_dev, bus_list);
sn_bus_free_data(child);
}
}
sn_pci_unfixup_slot(dev);
}
static u8 sn_power_status_get(struct hotplug_slot *bss_hotplug_slot)
{
struct slot *slot = (struct slot *)bss_hotplug_slot->private;
struct pcibus_info *pcibus_info;
u8 retval;
pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
retval = pcibus_info->pbi_enabled_devices & (1 << slot->device_num);
return retval ? 1 : 0;
}
static void sn_slot_mark_enable(struct hotplug_slot *bss_hotplug_slot,
int device_num)
{
struct slot *slot = (struct slot *)bss_hotplug_slot->private;
struct pcibus_info *pcibus_info;
pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
pcibus_info->pbi_enabled_devices |= (1 << device_num);
}
static void sn_slot_mark_disable(struct hotplug_slot *bss_hotplug_slot,
int device_num)
{
struct slot *slot = (struct slot *)bss_hotplug_slot->private;
struct pcibus_info *pcibus_info;
pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
pcibus_info->pbi_enabled_devices &= ~(1 << device_num);
}
static int sn_slot_enable(struct hotplug_slot *bss_hotplug_slot,
int device_num)
{
struct slot *slot = (struct slot *)bss_hotplug_slot->private;
struct pcibus_info *pcibus_info;
struct pcibr_slot_enable_resp resp;
int rc;
pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
/*
* Power-on and initialize the slot in the SN
* PCI infrastructure.
*/
rc = sal_pcibr_slot_enable(pcibus_info, device_num, &resp);
if (rc == PCI_SLOT_ALREADY_UP) {
dev_dbg(slot->pci_bus->self, "is already active\n");
return -EPERM;
}
if (rc == PCI_L1_ERR) {
dev_dbg(slot->pci_bus->self,
"L1 failure %d with message: %s",
resp.resp_sub_errno, resp.resp_l1_msg);
return -EPERM;
}
if (rc) {
dev_dbg(slot->pci_bus->self,
"insert failed with error %d sub-error %d\n",
rc, resp.resp_sub_errno);
return -EIO;
}
sn_slot_mark_enable(bss_hotplug_slot, device_num);
return 0;
}
static int sn_slot_disable(struct hotplug_slot *bss_hotplug_slot,
int device_num, int action)
{
struct slot *slot = (struct slot *)bss_hotplug_slot->private;
struct pcibus_info *pcibus_info;
struct pcibr_slot_disable_resp resp;
int rc;
pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
rc = sal_pcibr_slot_disable(pcibus_info, device_num, action, &resp);
if (action == PCI_REQ_SLOT_ELIGIBLE && rc == PCI_SLOT_ALREADY_DOWN) {
dev_dbg(slot->pci_bus->self, "Slot %s already inactive\n");
return -ENODEV;
}
if (action == PCI_REQ_SLOT_ELIGIBLE && rc == PCI_EMPTY_33MHZ) {
dev_dbg(slot->pci_bus->self,
"Cannot remove last 33MHz card\n");
return -EPERM;
}
if (action == PCI_REQ_SLOT_ELIGIBLE && rc == PCI_L1_ERR) {
dev_dbg(slot->pci_bus->self,
"L1 failure %d with message \n%s\n",
resp.resp_sub_errno, resp.resp_l1_msg);
return -EPERM;
}
if (action == PCI_REQ_SLOT_ELIGIBLE && rc) {
dev_dbg(slot->pci_bus->self,
"remove failed with error %d sub-error %d\n",
rc, resp.resp_sub_errno);
return -EIO;
}
if (action == PCI_REQ_SLOT_ELIGIBLE && !rc)
return 0;
if (action == PCI_REQ_SLOT_DISABLE && !rc) {
sn_slot_mark_disable(bss_hotplug_slot, device_num);
dev_dbg(slot->pci_bus->self, "remove successful\n");
return 0;
}
if (action == PCI_REQ_SLOT_DISABLE && rc) {
dev_dbg(slot->pci_bus->self,"remove failed rc = %d\n", rc);
return rc;
}
return rc;
}
static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
{
struct slot *slot = (struct slot *)bss_hotplug_slot->private;
struct pci_bus *new_bus = NULL;
struct pci_dev *dev;
int func, num_funcs;
int new_ppb = 0;
int rc;
/* Serialize the Linux PCI infrastructure */
down(&sn_hotplug_sem);
/*
* Power-on and initialize the slot in the SN
* PCI infrastructure.
*/
rc = sn_slot_enable(bss_hotplug_slot, slot->device_num);
if (rc) {
up(&sn_hotplug_sem);
return rc;
}
num_funcs = pci_scan_slot(slot->pci_bus, PCI_DEVFN(slot->device_num+1,
PCI_FUNC(0)));
if (!num_funcs) {
dev_dbg(slot->pci_bus->self, "no device in slot\n");
up(&sn_hotplug_sem);
return -ENODEV;
}
sn_pci_controller_fixup(pci_domain_nr(slot->pci_bus),
slot->pci_bus->number,
slot->pci_bus);
/*
* Map SN resources for all functions on the card
* to the Linux PCI interface and tell the drivers
* about them.
*/
for (func = 0; func < num_funcs; func++) {
dev = pci_get_slot(slot->pci_bus,
PCI_DEVFN(slot->device_num + 1,
PCI_FUNC(func)));
if (dev) {
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
unsigned char sec_bus;
pci_read_config_byte(dev, PCI_SECONDARY_BUS,
&sec_bus);
new_bus = pci_add_new_bus(dev->bus, dev,
sec_bus);
pci_scan_child_bus(new_bus);
sn_pci_controller_fixup(pci_domain_nr(new_bus),
new_bus->number,
new_bus);
new_ppb = 1;
}
sn_bus_alloc_data(dev);
pci_dev_put(dev);
}
}
/* Call the driver for the new device */
pci_bus_add_devices(slot->pci_bus);
/* Call the drivers for the new devices subordinate to PPB */
if (new_ppb)
pci_bus_add_devices(new_bus);
up(&sn_hotplug_sem);
if (rc == 0)
dev_dbg(slot->pci_bus->self,
"insert operation successful\n");
else
dev_dbg(slot->pci_bus->self,
"insert operation failed rc = %d\n", rc);
return rc;
}
static int disable_slot(struct hotplug_slot *bss_hotplug_slot)
{
struct slot *slot = (struct slot *)bss_hotplug_slot->private;
struct pci_dev *dev;
int func;
int rc;
/* Acquire update access to the bus */
down(&sn_hotplug_sem);
/* is it okay to bring this slot down? */
rc = sn_slot_disable(bss_hotplug_slot, slot->device_num,
PCI_REQ_SLOT_ELIGIBLE);
if (rc)
goto leaving;
/* Free the SN resources assigned to the Linux device.*/
for (func = 0; func < 8; func++) {
dev = pci_get_slot(slot->pci_bus,
PCI_DEVFN(slot->device_num+1,
PCI_FUNC(func)));
if (dev) {
/*
* Some drivers may use dma accesses during the
* driver remove function. We release the sysdata
* areas after the driver remove functions have
* been called.
*/
sn_bus_store_sysdata(dev);
sn_bus_free_data(dev);
pci_remove_bus_device(dev);
pci_dev_put(dev);
}
}
/* free the collected sysdata pointers */
sn_bus_free_sysdata();
/* Deactivate slot */
rc = sn_slot_disable(bss_hotplug_slot, slot->device_num,
PCI_REQ_SLOT_DISABLE);
leaving:
/* Release the bus lock */
up(&sn_hotplug_sem);
return rc;
}
static int get_power_status(struct hotplug_slot *bss_hotplug_slot, u8 *value)
{
down(&sn_hotplug_sem);
*value = sn_power_status_get(bss_hotplug_slot);
up(&sn_hotplug_sem);
return 0;
}
static void sn_release_slot(struct hotplug_slot *bss_hotplug_slot)
{
kfree(bss_hotplug_slot->info);
kfree(bss_hotplug_slot->name);
kfree(bss_hotplug_slot->private);
kfree(bss_hotplug_slot);
}
static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
{
int device;
struct hotplug_slot *bss_hotplug_slot;
int rc = 0;
/*
* Currently only four devices are supported,
* in the future there maybe more -- up to 32.
*/
for (device = 0; device < SN_MAX_HP_SLOTS ; device++) {
if (sn_pci_slot_valid(pci_bus, device) != 1)
continue;
bss_hotplug_slot = kcalloc(1,sizeof(struct hotplug_slot),
GFP_KERNEL);
if (!bss_hotplug_slot) {
rc = -ENOMEM;
goto alloc_err;
}
bss_hotplug_slot->info =
kcalloc(1,sizeof(struct hotplug_slot_info),
GFP_KERNEL);
if (!bss_hotplug_slot->info) {
rc = -ENOMEM;
goto alloc_err;
}
if (sn_hp_slot_private_alloc(bss_hotplug_slot,
pci_bus, device)) {
rc = -ENOMEM;
goto alloc_err;
}
bss_hotplug_slot->ops = &sn_hotplug_slot_ops;
bss_hotplug_slot->release = &sn_release_slot;
rc = pci_hp_register(bss_hotplug_slot);
if (rc)
goto register_err;
}
dev_dbg(pci_bus->self, "Registered bus with hotplug\n");
return rc;
register_err:
dev_dbg(pci_bus->self, "bus failed to register with err = %d\n",
rc);
alloc_err:
if (rc == -ENOMEM)
dev_dbg(pci_bus->self, "Memory allocation error\n");
/* destroy THIS element */
if (bss_hotplug_slot)
sn_release_slot(bss_hotplug_slot);
/* destroy anything else on the list */
while ((bss_hotplug_slot = sn_hp_destroy()))
pci_hp_deregister(bss_hotplug_slot);
return rc;
}
static int sn_pci_hotplug_init(void)
{
struct pci_bus *pci_bus = NULL;
int rc;
int registered = 0;
INIT_LIST_HEAD(&sn_hp_list);
if (sn_sal_rev() < SGI_HOTPLUG_PROM_REV) {
printk(KERN_ERR "%s: PROM version must be greater than 4.05\n",
__FUNCTION__);
return -EPERM;
}
while ((pci_bus = pci_find_next_bus(pci_bus))) {
if (!pci_bus->sysdata)
continue;
rc = sn_pci_bus_valid(pci_bus);
if (rc != 1) {
dev_dbg(pci_bus->self, "not a valid hotplug bus\n");
continue;
}
dev_dbg(pci_bus->self, "valid hotplug bus\n");
rc = sn_hotplug_slot_register(pci_bus);
if (!rc)
registered = 1;
else {
registered = 0;
break;
}
}
return registered == 1 ? 0 : -ENODEV;
}
static void sn_pci_hotplug_exit(void)
{
struct hotplug_slot *bss_hotplug_slot;
while ((bss_hotplug_slot = sn_hp_destroy())) {
pci_hp_deregister(bss_hotplug_slot);
}
if (!list_empty(&sn_hp_list))
printk(KERN_ERR "%s: internal list is not empty\n", __FILE__);
}
module_init(sn_pci_hotplug_init);
module_exit(sn_pci_hotplug_exit);