usb: gadget: add SS descriptors to Ethernet gadget
Add SuperSpeed descriptors to the Network USB
function drivers.
This has been lightly tested using a Linux host.
I was able to ssh from device to host and host to
device, no obvious problems seen.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index ddedbc83..3691a0c 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -77,10 +77,12 @@
/* peak (theoretical) bulk transfer rate in bits-per-second */
static inline unsigned ecm_bitrate(struct usb_gadget *g)
{
- if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+ if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
+ return 13 * 1024 * 8 * 1000 * 8;
+ else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
return 13 * 512 * 8 * 1000 * 8;
else
- return 19 * 64 * 1 * 1000 * 8;
+ return 19 * 64 * 1 * 1000 * 8;
}
/*-------------------------------------------------------------------------*/
@@ -210,8 +212,10 @@
(struct usb_descriptor_header *) &ecm_header_desc,
(struct usb_descriptor_header *) &ecm_union_desc,
(struct usb_descriptor_header *) &ecm_desc,
+
/* NOTE: status endpoint might need to be removed */
(struct usb_descriptor_header *) &fs_ecm_notify_desc,
+
/* data interface, altsettings 0 and 1 */
(struct usb_descriptor_header *) &ecm_data_nop_intf,
(struct usb_descriptor_header *) &ecm_data_intf,
@@ -231,6 +235,7 @@
.wMaxPacketSize = cpu_to_le16(ECM_STATUS_BYTECOUNT),
.bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
};
+
static struct usb_endpoint_descriptor hs_ecm_in_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -255,8 +260,10 @@
(struct usb_descriptor_header *) &ecm_header_desc,
(struct usb_descriptor_header *) &ecm_union_desc,
(struct usb_descriptor_header *) &ecm_desc,
+
/* NOTE: status endpoint might need to be removed */
(struct usb_descriptor_header *) &hs_ecm_notify_desc,
+
/* data interface, altsettings 0 and 1 */
(struct usb_descriptor_header *) &ecm_data_nop_intf,
(struct usb_descriptor_header *) &ecm_data_intf,
@@ -265,6 +272,76 @@
NULL,
};
+/* super speed support: */
+
+static struct usb_endpoint_descriptor ss_ecm_notify_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = cpu_to_le16(ECM_STATUS_BYTECOUNT),
+ .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ecm_intr_comp_desc = {
+ .bLength = sizeof ss_ecm_intr_comp_desc,
+ .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
+
+ /* the following 3 values can be tweaked if necessary */
+ /* .bMaxBurst = 0, */
+ /* .bmAttributes = 0, */
+ .wBytesPerInterval = cpu_to_le16(ECM_STATUS_BYTECOUNT),
+};
+
+static struct usb_endpoint_descriptor ss_ecm_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor ss_ecm_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ecm_bulk_comp_desc = {
+ .bLength = sizeof ss_ecm_bulk_comp_desc,
+ .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
+
+ /* the following 2 values can be tweaked if necessary */
+ /* .bMaxBurst = 0, */
+ /* .bmAttributes = 0, */
+};
+
+static struct usb_descriptor_header *ecm_ss_function[] = {
+ /* CDC ECM control descriptors */
+ (struct usb_descriptor_header *) &ecm_control_intf,
+ (struct usb_descriptor_header *) &ecm_header_desc,
+ (struct usb_descriptor_header *) &ecm_union_desc,
+ (struct usb_descriptor_header *) &ecm_desc,
+
+ /* NOTE: status endpoint might need to be removed */
+ (struct usb_descriptor_header *) &ss_ecm_notify_desc,
+ (struct usb_descriptor_header *) &ss_ecm_intr_comp_desc,
+
+ /* data interface, altsettings 0 and 1 */
+ (struct usb_descriptor_header *) &ecm_data_nop_intf,
+ (struct usb_descriptor_header *) &ecm_data_intf,
+ (struct usb_descriptor_header *) &ss_ecm_in_desc,
+ (struct usb_descriptor_header *) &ss_ecm_bulk_comp_desc,
+ (struct usb_descriptor_header *) &ss_ecm_out_desc,
+ (struct usb_descriptor_header *) &ss_ecm_bulk_comp_desc,
+ NULL,
+};
+
/* string descriptors: */
static struct usb_string ecm_string_defs[] = {
@@ -679,6 +756,20 @@
goto fail;
}
+ if (gadget_is_superspeed(c->cdev->gadget)) {
+ ss_ecm_in_desc.bEndpointAddress =
+ fs_ecm_in_desc.bEndpointAddress;
+ ss_ecm_out_desc.bEndpointAddress =
+ fs_ecm_out_desc.bEndpointAddress;
+ ss_ecm_notify_desc.bEndpointAddress =
+ fs_ecm_notify_desc.bEndpointAddress;
+
+ /* copy descriptors, and track endpoint copies */
+ f->ss_descriptors = usb_copy_descriptors(ecm_ss_function);
+ if (!f->ss_descriptors)
+ goto fail;
+ }
+
/* NOTE: all that is done without knowing or caring about
* the network link ... which is unavailable to this code
* until we're activated via set_alt().
@@ -688,6 +779,7 @@
ecm->port.close = ecm_close;
DBG(cdev, "CDC Ethernet: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+ gadget_is_superspeed(c->cdev->gadget) ? "super" :
gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
ecm->port.in_ep->name, ecm->port.out_ep->name,
ecm->notify->name);
@@ -696,6 +788,8 @@
fail:
if (f->descriptors)
usb_free_descriptors(f->descriptors);
+ if (f->hs_descriptors)
+ usb_free_descriptors(f->hs_descriptors);
if (ecm->notify_req) {
kfree(ecm->notify_req->buf);
@@ -722,6 +816,8 @@
DBG(c->cdev, "ecm unbind\n");
+ if (gadget_is_superspeed(c->cdev->gadget))
+ usb_free_descriptors(f->ss_descriptors);
if (gadget_is_dualspeed(c->cdev->gadget))
usb_free_descriptors(f->hs_descriptors);
usb_free_descriptors(f->descriptors);