gpio-tz1090: convert to use generic irqchip
Convert gpio-tz1090 driver to use generic irqchips. This allows the
irq_ack, irq_mask, and irq_unmask callbacks and associated helper
functions to be removed. Also switch to using irq_setup_alt_chip() in
the irq_set_type callback instead of using __irq_set_handler_locked().
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 4e44cdc..02db4ea 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -245,6 +245,7 @@
config GPIO_TZ1090
bool "Toumaz Xenif TZ1090 GPIO support"
depends on SOC_TZ1090
+ select GENERIC_IRQ_CHIP
default y
help
Say yes here to support Toumaz Xenif TZ1090 GPIOs.
diff --git a/drivers/gpio/gpio-tz1090.c b/drivers/gpio/gpio-tz1090.c
index b725a6b..23e0613 100644
--- a/drivers/gpio/gpio-tz1090.c
+++ b/drivers/gpio/gpio-tz1090.c
@@ -270,30 +270,12 @@
return (struct tz1090_gpio_bank *)data->domain->host_data;
}
-static void tz1090_gpio_irq_clear(struct tz1090_gpio_bank *bank,
- unsigned int offset)
-{
- tz1090_gpio_clear_bit(bank, REG_GPIO_IRQ_STS, offset);
-}
-
-static void tz1090_gpio_irq_enable(struct tz1090_gpio_bank *bank,
- unsigned int offset, bool enable)
-{
- tz1090_gpio_mod_bit(bank, REG_GPIO_IRQ_EN, offset, enable);
-}
-
static void tz1090_gpio_irq_polarity(struct tz1090_gpio_bank *bank,
unsigned int offset, unsigned int polarity)
{
tz1090_gpio_mod_bit(bank, REG_GPIO_IRQ_PLRT, offset, polarity);
}
-static int tz1090_gpio_valid_handler(struct irq_desc *desc)
-{
- return desc->handle_irq == handle_level_irq ||
- desc->handle_irq == handle_edge_irq;
-}
-
static void tz1090_gpio_irq_type(struct tz1090_gpio_bank *bank,
unsigned int offset, unsigned int type)
{
@@ -320,43 +302,18 @@
__global_unlock2(lstat);
}
-static void gpio_ack_irq(struct irq_data *data)
-{
- struct tz1090_gpio_bank *bank = irqd_to_gpio_bank(data);
-
- tz1090_gpio_irq_clear(bank, data->hwirq);
-}
-
-static void gpio_mask_irq(struct irq_data *data)
-{
- struct tz1090_gpio_bank *bank = irqd_to_gpio_bank(data);
-
- tz1090_gpio_irq_enable(bank, data->hwirq, false);
-}
-
-static void gpio_unmask_irq(struct irq_data *data)
-{
- struct tz1090_gpio_bank *bank = irqd_to_gpio_bank(data);
-
- tz1090_gpio_irq_enable(bank, data->hwirq, true);
-}
-
static unsigned int gpio_startup_irq(struct irq_data *data)
{
- struct tz1090_gpio_bank *bank = irqd_to_gpio_bank(data);
- irq_hw_number_t hw = data->hwirq;
- struct irq_desc *desc = irq_to_desc(data->irq);
-
/*
* This warning indicates that the type of the irq hasn't been set
* before enabling the irq. This would normally be done by passing some
* trigger flags to request_irq().
*/
- WARN(!tz1090_gpio_valid_handler(desc),
+ WARN(irqd_get_trigger_type(data) == IRQ_TYPE_NONE,
"irq type not set before enabling gpio irq %d", data->irq);
- tz1090_gpio_irq_clear(bank, hw);
- tz1090_gpio_irq_enable(bank, hw, true);
+ irq_gc_ack_clr_bit(data);
+ irq_gc_mask_set_bit(data);
return 0;
}
@@ -392,10 +349,7 @@
}
tz1090_gpio_irq_type(bank, data->hwirq, type);
- if (type == REG_GPIO_IRQ_TYPE_LEVEL)
- __irq_set_handler_locked(data->irq, handle_level_irq);
- else
- __irq_set_handler_locked(data->irq, handle_edge_irq);
+ irq_setup_alt_chip(data, flow_type);
if (flow_type == IRQ_TYPE_EDGE_BOTH)
tz1090_gpio_irq_next_edge(bank, data->hwirq);
@@ -421,17 +375,6 @@
#define gpio_set_irq_wake NULL
#endif
-/* gpio virtual interrupt functions */
-static struct irq_chip gpio_irq_chip = {
- .irq_startup = gpio_startup_irq,
- .irq_ack = gpio_ack_irq,
- .irq_mask = gpio_mask_irq,
- .irq_unmask = gpio_unmask_irq,
- .irq_set_type = gpio_set_irq_type,
- .irq_set_wake = gpio_set_irq_wake,
- .flags = IRQCHIP_MASK_ON_SUSPEND,
-};
-
static void tz1090_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
{
irq_hw_number_t hw;
@@ -457,28 +400,17 @@
== IRQ_TYPE_EDGE_BOTH)
tz1090_gpio_irq_next_edge(bank, hw);
- BUG_ON(!tz1090_gpio_valid_handler(child_desc));
generic_handle_irq_desc(irq_no, child_desc);
}
}
-static int tz1090_gpio_irq_map(struct irq_domain *d, unsigned int irq,
- irq_hw_number_t hw)
-{
- irq_set_chip(irq, &gpio_irq_chip);
- return 0;
-}
-
-static const struct irq_domain_ops tz1090_gpio_irq_domain_ops = {
- .map = tz1090_gpio_irq_map,
- .xlate = irq_domain_xlate_twocell,
-};
-
static int tz1090_gpio_bank_probe(struct tz1090_gpio_bank_info *info)
{
struct device_node *np = info->node;
struct device *dev = info->priv->dev;
struct tz1090_gpio_bank *bank;
+ struct irq_chip_generic *gc;
+ int err;
bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL);
if (!bank) {
@@ -533,9 +465,50 @@
/* Add a virtual IRQ for each GPIO */
bank->domain = irq_domain_add_linear(np,
bank->chip.ngpio,
- &tz1090_gpio_irq_domain_ops,
+ &irq_generic_chip_ops,
bank);
+ /* Set up a generic irq chip with 2 chip types (level and edge) */
+ err = irq_alloc_domain_generic_chips(bank->domain, bank->chip.ngpio, 2,
+ bank->label, handle_bad_irq, 0, 0,
+ IRQ_GC_INIT_NESTED_LOCK);
+ if (err) {
+ dev_info(dev,
+ "irq_alloc_domain_generic_chips failed for bank %u, IRQs disabled\n",
+ info->index);
+ irq_domain_remove(bank->domain);
+ return 0;
+ }
+
+ gc = irq_get_domain_generic_chip(bank->domain, 0);
+ gc->reg_base = bank->reg;
+
+ /* level chip type */
+ gc->chip_types[0].type = IRQ_TYPE_LEVEL_MASK;
+ gc->chip_types[0].handler = handle_level_irq;
+ gc->chip_types[0].regs.ack = REG_GPIO_IRQ_STS;
+ gc->chip_types[0].regs.mask = REG_GPIO_IRQ_EN;
+ gc->chip_types[0].chip.irq_startup = gpio_startup_irq,
+ gc->chip_types[0].chip.irq_ack = irq_gc_ack_clr_bit,
+ gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit,
+ gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit,
+ gc->chip_types[0].chip.irq_set_type = gpio_set_irq_type,
+ gc->chip_types[0].chip.irq_set_wake = gpio_set_irq_wake,
+ gc->chip_types[0].chip.flags = IRQCHIP_MASK_ON_SUSPEND,
+
+ /* edge chip type */
+ gc->chip_types[1].type = IRQ_TYPE_EDGE_BOTH;
+ gc->chip_types[1].handler = handle_edge_irq;
+ gc->chip_types[1].regs.ack = REG_GPIO_IRQ_STS;
+ gc->chip_types[1].regs.mask = REG_GPIO_IRQ_EN;
+ gc->chip_types[1].chip.irq_startup = gpio_startup_irq,
+ gc->chip_types[1].chip.irq_ack = irq_gc_ack_clr_bit,
+ gc->chip_types[1].chip.irq_mask = irq_gc_mask_clr_bit,
+ gc->chip_types[1].chip.irq_unmask = irq_gc_mask_set_bit,
+ gc->chip_types[1].chip.irq_set_type = gpio_set_irq_type,
+ gc->chip_types[1].chip.irq_set_wake = gpio_set_irq_wake,
+ gc->chip_types[1].chip.flags = IRQCHIP_MASK_ON_SUSPEND,
+
/* Setup chained handler for this GPIO bank */
irq_set_handler_data(bank->irq, bank);
irq_set_chained_handler(bank->irq, tz1090_gpio_irq_handler);