V4L/DVB (5202): DVB: Use ARRAY_SIZE macro when appropriate
Use ARRAY_SIZE macro already defined in kernel.h
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index 9f72b70..0393a3d 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -1161,7 +1161,7 @@
}
}
- if (i >= sizeof (dst_tlist) / sizeof (dst_tlist [0])) {
+ if (i >= ARRAY_SIZE(dst_tlist)) {
dprintk(verbose, DST_ERROR, 1, "Unable to recognize %s or %s", &state->rxbuffer[0], &state->rxbuffer[1]);
dprintk(verbose, DST_ERROR, 1, "please email linux-dvb@linuxtv.org with this type in");
use_dst_type = DST_TYPE_IS_SAT;
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index 3e35931..58f69f6 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -23,6 +23,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/slab.h>
@@ -213,7 +214,7 @@
freq = 2150000; /* satellite IF is 950..2150MHz */
/* decide which VCO to use for the input frequency */
- for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
+ for(i = 1; (i < ARRAY_SIZE(osci)) && (osci[i] < freq); i++);
printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
band=bandsel[i];
/* the gain values must be set by SetSymbolrate */
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index ae96395..10fc0c8 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -254,7 +254,7 @@
if (srate<500000)
srate=500000;
- for(i=0;(i<sizeof(bands)/sizeof(bands[0]))&&(srate>bands[i]);i++)
+ for(i = 0; (i < ARRAY_SIZE(bands)) && (srate>bands[i]); i++)
;
/* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz,
and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult,
@@ -361,7 +361,7 @@
dprintk("%s: init chip\n", __FUNCTION__);
- for(i=0;i<sizeof(cx24110_regdata)/sizeof(cx24110_regdata[0]);i++) {
+ for(i = 0; i < ARRAY_SIZE(cx24110_regdata); i++) {
cx24110_writereg(state, cx24110_regdata[i].reg, cx24110_regdata[i].data);
};
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
index a356d28..732e94a 100644
--- a/drivers/media/dvb/frontends/cx24123.c
+++ b/drivers/media/dvb/frontends/cx24123.c
@@ -507,7 +507,7 @@
int i = 0;
int pump = 2;
int band = 0;
- int num_bands = sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]);
+ int num_bands = ARRAY_SIZE(cx24123_bandselect_vals);
/* Defaults for low freq, low rate */
state->VCAarg = cx24123_AGC_vals[0].VCAprogdata;
@@ -516,7 +516,7 @@
vco_div = cx24123_bandselect_vals[0].VCOdivider;
/* For the given symbol rate, determine the VCA, VGA and FILTUNE programming bits */
- for (i = 0; i < sizeof(cx24123_AGC_vals) / sizeof(cx24123_AGC_vals[0]); i++)
+ for (i = 0; i < ARRAY_SIZE(cx24123_AGC_vals); i++)
{
if ((cx24123_AGC_vals[i].symbolrate_low <= p->u.qpsk.symbol_rate) &&
(cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
@@ -658,7 +658,7 @@
dprintk("%s: init frontend\n",__FUNCTION__);
/* Configure the demod to a good set of defaults */
- for (i = 0; i < sizeof(cx24123_regdata) / sizeof(cx24123_regdata[0]); i++)
+ for (i = 0; i < ARRAY_SIZE(cx24123_regdata); i++)
cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data);
/* Set the LNB polarity */
diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c
index 744d87e..f59465b 100644
--- a/drivers/media/dvb/ttpci/av7110_ir.c
+++ b/drivers/media/dvb/ttpci/av7110_ir.c
@@ -4,6 +4,7 @@
#include <linux/moduleparam.h>
#include <linux/input.h>
#include <linux/proc_fs.h>
+#include <linux/kernel.h>
#include <asm/bitops.h>
#include "av7110.h"
@@ -218,7 +219,7 @@
static struct proc_dir_entry *e;
int err;
- if (av_cnt >= sizeof av_list/sizeof av_list[0])
+ if (av_cnt >= ARRAY_SIZE(av_list))
return -ENOSPC;
av7110_setup_irc_config(av7110, 0x0001);