[SCSI] lpfc 8.3.2 : Addition of SLI4 Interface - Mailbox handling
The mailbox commands themselves are the same, or very similar to
their SLI3 counterparts. This patch genericizes mailbox command
handling and adds support for the new SLI4 mailbox queue.
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index cf42ada..b53af99 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -43,24 +43,7 @@
#include "lpfc_logmsg.h"
#include "lpfc_compat.h"
#include "lpfc_debugfs.h"
-
-/*
- * Define macro to log: Mailbox command x%x cannot issue Data
- * This allows multiple uses of lpfc_msgBlk0311
- * w/o perturbing log msg utility.
- */
-#define LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag) \
- lpfc_printf_log(phba, \
- KERN_INFO, \
- LOG_MBOX | LOG_SLI, \
- "(%d):0311 Mailbox command x%x cannot " \
- "issue Data: x%x x%x x%x\n", \
- pmbox->vport ? pmbox->vport->vpi : 0, \
- pmbox->mb.mbxCommand, \
- phba->pport->port_state, \
- psli->sli_flag, \
- flag)
-
+#include "lpfc_vport.h"
/* There are only four IOCB completion types. */
typedef enum _lpfc_iocb_type {
@@ -843,7 +826,7 @@
pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb)
return -ENOMEM;
- pmbox = &pmb->mb;
+ pmbox = &pmb->u.mb;
phba->link_state = LPFC_INIT_MBX_CMDS;
for (i = 0; i < psli->num_rings; i++) {
lpfc_config_ring(phba, i, pmb);
@@ -1652,6 +1635,15 @@
case MBX_HEARTBEAT:
case MBX_PORT_CAPABILITIES:
case MBX_PORT_IOV_CONTROL:
+ case MBX_SLI4_CONFIG:
+ case MBX_SLI4_REQ_FTRS:
+ case MBX_REG_FCFI:
+ case MBX_UNREG_FCFI:
+ case MBX_REG_VFI:
+ case MBX_UNREG_VFI:
+ case MBX_INIT_VPI:
+ case MBX_INIT_VFI:
+ case MBX_RESUME_RPI:
ret = mbxCommand;
break;
default:
@@ -1672,7 +1664,7 @@
* will wake up thread waiting on the wait queue pointed by context1
* of the mailbox.
**/
-static void
+void
lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
{
wait_queue_head_t *pdone_q;
@@ -1706,7 +1698,7 @@
lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_dmabuf *mp;
- uint16_t rpi;
+ uint16_t rpi, vpi;
int rc;
mp = (struct lpfc_dmabuf *) (pmb->context1);
@@ -1716,24 +1708,30 @@
kfree(mp);
}
+ if ((pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) &&
+ (phba->sli_rev == LPFC_SLI_REV4))
+ lpfc_sli4_free_rpi(phba, pmb->u.mb.un.varUnregLogin.rpi);
+
/*
* If a REG_LOGIN succeeded after node is destroyed or node
* is in re-discovery driver need to cleanup the RPI.
*/
if (!(phba->pport->load_flag & FC_UNLOADING) &&
- pmb->mb.mbxCommand == MBX_REG_LOGIN64 &&
- !pmb->mb.mbxStatus) {
-
- rpi = pmb->mb.un.varWords[0];
- lpfc_unreg_login(phba, pmb->mb.un.varRegLogin.vpi, rpi, pmb);
+ pmb->u.mb.mbxCommand == MBX_REG_LOGIN64 &&
+ !pmb->u.mb.mbxStatus) {
+ rpi = pmb->u.mb.un.varWords[0];
+ vpi = pmb->u.mb.un.varRegLogin.vpi - phba->vpi_base;
+ lpfc_unreg_login(phba, vpi, rpi, pmb);
pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
if (rc != MBX_NOT_FINISHED)
return;
}
- mempool_free(pmb, phba->mbox_mem_pool);
- return;
+ if (bf_get(lpfc_mqe_command, &pmb->u.mqe) == MBX_SLI4_CONFIG)
+ lpfc_sli4_mbox_cmd_free(phba, pmb);
+ else
+ mempool_free(pmb, phba->mbox_mem_pool);
}
/**
@@ -1770,7 +1768,7 @@
if (pmb == NULL)
break;
- pmbox = &pmb->mb;
+ pmbox = &pmb->u.mb;
if (pmbox->mbxCommand != MBX_HEARTBEAT) {
if (pmb->vport) {
@@ -1799,9 +1797,10 @@
/* Unknow mailbox command compl */
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"(%d):0323 Unknown Mailbox command "
- "%x Cmpl\n",
+ "x%x (x%x) Cmpl\n",
pmb->vport ? pmb->vport->vpi : 0,
- pmbox->mbxCommand);
+ pmbox->mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, pmb));
phba->link_state = LPFC_HBA_ERROR;
phba->work_hs = HS_FFER3;
lpfc_handle_eratt(phba);
@@ -1816,29 +1815,29 @@
LOG_MBOX | LOG_SLI,
"(%d):0305 Mbox cmd cmpl "
"error - RETRYing Data: x%x "
- "x%x x%x x%x\n",
+ "(x%x) x%x x%x x%x\n",
pmb->vport ? pmb->vport->vpi :0,
pmbox->mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba,
+ pmb),
pmbox->mbxStatus,
pmbox->un.varWords[0],
pmb->vport->port_state);
pmbox->mbxStatus = 0;
pmbox->mbxOwner = OWN_HOST;
- spin_lock_irq(&phba->hbalock);
- phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
- spin_unlock_irq(&phba->hbalock);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
- if (rc == MBX_SUCCESS)
+ if (rc != MBX_NOT_FINISHED)
continue;
}
}
/* Mailbox cmd <cmd> Cmpl <cmpl> */
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
- "(%d):0307 Mailbox cmd x%x Cmpl x%p "
+ "(%d):0307 Mailbox cmd x%x (x%x) Cmpl x%p "
"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n",
pmb->vport ? pmb->vport->vpi : 0,
pmbox->mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, pmb),
pmb->mbox_cmpl,
*((uint32_t *) pmbox),
pmbox->un.varWords[0],
@@ -3377,10 +3376,10 @@
}
spin_lock_irq(&phba->hbalock);
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ psli->mbox_active = NULL;
phba->link_flag &= ~LS_IGNORE_ERATT;
spin_unlock_irq(&phba->hbalock);
- psli->mbox_active = NULL;
lpfc_hba_down_post(phba);
phba->link_state = LPFC_HBA_ERROR;
@@ -3790,7 +3789,7 @@
if (!pmb)
return -ENOMEM;
- pmbox = &pmb->mb;
+ pmbox = &pmb->u.mb;
/* Initialize the struct lpfc_sli_hbq structure for each hbq */
phba->link_state = LPFC_INIT_MBX_CMDS;
@@ -3917,33 +3916,43 @@
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0442 Adapter failed to init, mbxCmd x%x "
"CONFIG_PORT, mbxStatus x%x Data: x%x\n",
- pmb->mb.mbxCommand, pmb->mb.mbxStatus, 0);
+ pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus, 0);
spin_lock_irq(&phba->hbalock);
- phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE;
+ phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
rc = -ENXIO;
- } else
+ } else {
+ /* Allow asynchronous mailbox command to go through */
+ spin_lock_irq(&phba->hbalock);
+ phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+ spin_unlock_irq(&phba->hbalock);
done = 1;
+ }
}
if (!done) {
rc = -EINVAL;
goto do_prep_failed;
}
- if (pmb->mb.un.varCfgPort.sli_mode == 3) {
- if (!pmb->mb.un.varCfgPort.cMA) {
+ if (pmb->u.mb.un.varCfgPort.sli_mode == 3) {
+ if (!pmb->u.mb.un.varCfgPort.cMA) {
rc = -ENXIO;
goto do_prep_failed;
}
- if (phba->max_vpi && pmb->mb.un.varCfgPort.gmv) {
+ if (phba->max_vpi && pmb->u.mb.un.varCfgPort.gmv) {
phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
- phba->max_vpi = pmb->mb.un.varCfgPort.max_vpi;
+ phba->max_vpi = pmb->u.mb.un.varCfgPort.max_vpi;
+ phba->max_vports = (phba->max_vpi > phba->max_vports) ?
+ phba->max_vpi : phba->max_vports;
+
} else
phba->max_vpi = 0;
- if (pmb->mb.un.varCfgPort.gerbm)
+ if (pmb->u.mb.un.varCfgPort.gdss)
+ phba->sli3_options |= LPFC_SLI3_DSS_ENABLED;
+ if (pmb->u.mb.un.varCfgPort.gerbm)
phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED;
- if (pmb->mb.un.varCfgPort.gcrp)
+ if (pmb->u.mb.un.varCfgPort.gcrp)
phba->sli3_options |= LPFC_SLI3_CRP_ENABLED;
- if (pmb->mb.un.varCfgPort.ginb) {
+ if (pmb->u.mb.un.varCfgPort.ginb) {
phba->sli3_options |= LPFC_SLI3_INB_ENABLED;
phba->hbq_get = phba->mbox->us.s3_inb_pgp.hbq_get;
phba->port_gp = phba->mbox->us.s3_inb_pgp.port;
@@ -3959,7 +3968,7 @@
}
if (phba->cfg_enable_bg) {
- if (pmb->mb.un.varCfgPort.gbg)
+ if (pmb->u.mb.un.varCfgPort.gbg)
phba->sli3_options |= LPFC_SLI3_BG_ENABLED;
else
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -4054,8 +4063,9 @@
if (rc)
goto lpfc_sli_hba_setup_error;
}
-
+ spin_lock_irq(&phba->hbalock);
phba->sli.sli_flag |= LPFC_PROCESS_LA;
+ spin_unlock_irq(&phba->hbalock);
rc = lpfc_config_port_post(phba);
if (rc)
@@ -4596,7 +4606,7 @@
lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
{
LPFC_MBOXQ_t *pmbox = phba->sli.mbox_active;
- MAILBOX_t *mb = &pmbox->mb;
+ MAILBOX_t *mb = &pmbox->u.mb;
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
@@ -6414,6 +6424,52 @@
}
/**
+ * lpfc_sli_mbox_sys_flush - Flush mailbox command sub-system
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine flushes the mailbox command subsystem. It will unconditionally
+ * flush all the mailbox commands in the three possible stages in the mailbox
+ * command sub-system: pending mailbox command queue; the outstanding mailbox
+ * command; and completed mailbox command queue. It is caller's responsibility
+ * to make sure that the driver is in the proper state to flush the mailbox
+ * command sub-system. Namely, the posting of mailbox commands into the
+ * pending mailbox command queue from the various clients must be stopped;
+ * either the HBA is in a state that it will never works on the outstanding
+ * mailbox command (such as in EEH or ERATT conditions) or the outstanding
+ * mailbox command has been completed.
+ **/
+static void
+lpfc_sli_mbox_sys_flush(struct lpfc_hba *phba)
+{
+ LIST_HEAD(completions);
+ struct lpfc_sli *psli = &phba->sli;
+ LPFC_MBOXQ_t *pmb;
+ unsigned long iflag;
+
+ /* Flush all the mailbox commands in the mbox system */
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ /* The pending mailbox command queue */
+ list_splice_init(&phba->sli.mboxq, &completions);
+ /* The outstanding active mailbox command */
+ if (psli->mbox_active) {
+ list_add_tail(&psli->mbox_active->list, &completions);
+ psli->mbox_active = NULL;
+ psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ }
+ /* The completed mailbox command queue */
+ list_splice_init(&phba->sli.mboxq_cmpl, &completions);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+ /* Return all flushed mailbox commands with MBX_NOT_FINISHED status */
+ while (!list_empty(&completions)) {
+ list_remove_head(&completions, pmb, LPFC_MBOXQ_t, list);
+ pmb->u.mb.mbxStatus = MBX_NOT_FINISHED;
+ if (pmb->mbox_cmpl)
+ pmb->mbox_cmpl(phba, pmb);
+ }
+}
+
+/**
* lpfc_sli_host_down - Vport cleanup function
* @vport: Pointer to virtual port object.
*
@@ -6506,9 +6562,11 @@
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
struct lpfc_dmabuf *buf_ptr;
- LPFC_MBOXQ_t *pmb;
- int i;
unsigned long flags = 0;
+ int i;
+
+ /* Shutdown the mailbox command sub-system */
+ lpfc_sli_mbox_sys_shutdown(phba);
lpfc_hba_down_prep(phba);
@@ -7773,7 +7831,7 @@
if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) {
pmb = phba->sli.mbox_active;
- pmbox = &pmb->mb;
+ pmbox = &pmb->u.mb;
mbox = phba->mbox;
vport = pmb->vport;
@@ -8170,6 +8228,183 @@
}
/**
+ * lpfc_sli4_sp_handle_async_event - Handle an asynchroous event
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry with asynchrous
+ * event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_async_event(struct lpfc_hba *phba, struct lpfc_mcqe *mcqe)
+{
+ struct lpfc_cq_event *cq_event;
+ unsigned long iflags;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "0392 Async Event: word0:x%x, word1:x%x, "
+ "word2:x%x, word3:x%x\n", mcqe->word0,
+ mcqe->mcqe_tag0, mcqe->mcqe_tag1, mcqe->trailer);
+
+ /* Allocate a new internal CQ_EVENT entry */
+ cq_event = lpfc_sli4_cq_event_alloc(phba);
+ if (!cq_event) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0394 Failed to allocate CQ_EVENT entry\n");
+ return false;
+ }
+
+ /* Move the CQE into an asynchronous event entry */
+ memcpy(&cq_event->cqe, mcqe, sizeof(struct lpfc_mcqe));
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ list_add_tail(&cq_event->list, &phba->sli4_hba.sp_asynce_work_queue);
+ /* Set the async event flag */
+ phba->hba_flag |= ASYNC_EVENT;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ return true;
+}
+
+/**
+ * lpfc_sli4_sp_handle_mbox_event - Handle a mailbox completion event
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry with mailbox
+ * completion event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_mbox_event(struct lpfc_hba *phba, struct lpfc_mcqe *mcqe)
+{
+ uint32_t mcqe_status;
+ MAILBOX_t *mbox, *pmbox;
+ struct lpfc_mqe *mqe;
+ struct lpfc_vport *vport;
+ struct lpfc_nodelist *ndlp;
+ struct lpfc_dmabuf *mp;
+ unsigned long iflags;
+ LPFC_MBOXQ_t *pmb;
+ bool workposted = false;
+ int rc;
+
+ /* If not a mailbox complete MCQE, out by checking mailbox consume */
+ if (!bf_get(lpfc_trailer_completed, mcqe))
+ goto out_no_mqe_complete;
+
+ /* Get the reference to the active mbox command */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ pmb = phba->sli.mbox_active;
+ if (unlikely(!pmb)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "1832 No pending MBOX command to handle\n");
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ goto out_no_mqe_complete;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ mqe = &pmb->u.mqe;
+ pmbox = (MAILBOX_t *)&pmb->u.mqe;
+ mbox = phba->mbox;
+ vport = pmb->vport;
+
+ /* Reset heartbeat timer */
+ phba->last_completion_time = jiffies;
+ del_timer(&phba->sli.mbox_tmo);
+
+ /* Move mbox data to caller's mailbox region, do endian swapping */
+ if (pmb->mbox_cmpl && mbox)
+ lpfc_sli_pcimem_bcopy(mbox, mqe, sizeof(struct lpfc_mqe));
+ /* Set the mailbox status with SLI4 range 0x4000 */
+ mcqe_status = bf_get(lpfc_mcqe_status, mcqe);
+ if (mcqe_status != MB_CQE_STATUS_SUCCESS)
+ bf_set(lpfc_mqe_status, mqe,
+ (LPFC_MBX_ERROR_RANGE | mcqe_status));
+
+ if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) {
+ pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG;
+ lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_MBOX_VPORT,
+ "MBOX dflt rpi: status:x%x rpi:x%x",
+ mcqe_status,
+ pmbox->un.varWords[0], 0);
+ if (mcqe_status == MB_CQE_STATUS_SUCCESS) {
+ mp = (struct lpfc_dmabuf *)(pmb->context1);
+ ndlp = (struct lpfc_nodelist *)pmb->context2;
+ /* Reg_LOGIN of dflt RPI was successful. Now lets get
+ * RID of the PPI using the same mbox buffer.
+ */
+ lpfc_unreg_login(phba, vport->vpi,
+ pmbox->un.varWords[0], pmb);
+ pmb->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi;
+ pmb->context1 = mp;
+ pmb->context2 = ndlp;
+ pmb->vport = vport;
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+ if (rc != MBX_BUSY)
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX |
+ LOG_SLI, "0385 rc should "
+ "have been MBX_BUSY\n");
+ if (rc != MBX_NOT_FINISHED)
+ goto send_current_mbox;
+ }
+ }
+ spin_lock_irqsave(&phba->pport->work_port_lock, iflags);
+ phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
+ spin_unlock_irqrestore(&phba->pport->work_port_lock, iflags);
+
+ /* There is mailbox completion work to do */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ __lpfc_mbox_cmpl_put(phba, pmb);
+ phba->work_ha |= HA_MBATT;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+
+send_current_mbox:
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ /* Release the mailbox command posting token */
+ phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ /* Setting active mailbox pointer need to be in sync to flag clear */
+ phba->sli.mbox_active = NULL;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ /* Wake up worker thread to post the next pending mailbox command */
+ lpfc_worker_wake_up(phba);
+out_no_mqe_complete:
+ if (bf_get(lpfc_trailer_consumed, mcqe))
+ lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_mcqe - Process a mailbox completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry, it invokes the
+ * proper mailbox complete handling or asynchrous event handling routine
+ * according to the MCQE's async bit.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_mcqe(struct lpfc_hba *phba, struct lpfc_cqe *cqe)
+{
+ struct lpfc_mcqe mcqe;
+ bool workposted;
+
+ /* Copy the mailbox MCQE and convert endian order as needed */
+ lpfc_sli_pcimem_bcopy(cqe, &mcqe, sizeof(struct lpfc_mcqe));
+
+ /* Invoke the proper event handling routine */
+ if (!bf_get(lpfc_trailer_async, &mcqe))
+ workposted = lpfc_sli4_sp_handle_mbox_event(phba, &mcqe);
+ else
+ workposted = lpfc_sli4_sp_handle_async_event(phba, &mcqe);
+ return workposted;
+}
+
+/**
* lpfc_sli4_sp_handle_els_wcqe - Handle els work-queue completion event
* @phba: Pointer to HBA context object.
* @wcqe: Pointer to work-queue completion queue entry.
@@ -9247,6 +9482,112 @@
}
/**
+ * lpfc_mq_create - Create a mailbox Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @mq: The queue structure to use to create the mailbox queue.
+ *
+ * This function creates a mailbox queue, as detailed in @mq, on a port,
+ * described by @phba by sending a MQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @cq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. This
+ * function will send the MQ_CREATE mailbox command to the HBA to setup the
+ * mailbox queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
+ struct lpfc_queue *cq, uint32_t subtype)
+{
+ struct lpfc_mbx_mq_create *mq_create;
+ struct lpfc_dmabuf *dmabuf;
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_mq_create) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_MQ_CREATE,
+ length, LPFC_SLI4_MBX_EMBED);
+ mq_create = &mbox->u.mqe.un.mq_create;
+ bf_set(lpfc_mbx_mq_create_num_pages, &mq_create->u.request,
+ mq->page_count);
+ bf_set(lpfc_mq_context_cq_id, &mq_create->u.request.context,
+ cq->queue_id);
+ bf_set(lpfc_mq_context_valid, &mq_create->u.request.context, 1);
+ switch (mq->entry_count) {
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0362 Unsupported MQ count. (%d)\n",
+ mq->entry_count);
+ if (mq->entry_count < 16)
+ return -EINVAL;
+ /* otherwise default to smallest count (drop through) */
+ case 16:
+ bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+ LPFC_MQ_CNT_16);
+ break;
+ case 32:
+ bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+ LPFC_MQ_CNT_32);
+ break;
+ case 64:
+ bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+ LPFC_MQ_CNT_64);
+ break;
+ case 128:
+ bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+ LPFC_MQ_CNT_128);
+ break;
+ }
+ list_for_each_entry(dmabuf, &mq->page_list, list) {
+ mq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+ putPaddrLow(dmabuf->phys);
+ mq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+ putPaddrHigh(dmabuf->phys);
+ }
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *) &mq_create->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2502 MQ_CREATE mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ goto out;
+ }
+ mq->queue_id = bf_get(lpfc_mbx_mq_create_q_id, &mq_create->u.response);
+ if (mq->queue_id == 0xFFFF) {
+ status = -ENXIO;
+ goto out;
+ }
+ mq->type = LPFC_MQ;
+ mq->subtype = subtype;
+ mq->host_index = 0;
+ mq->hba_index = 0;
+
+ /* link the mq onto the parent cq child list */
+ list_add_tail(&mq->list, &cq->child_list);
+out:
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return status;
+}
+
+/**
* lpfc_wq_create - Create a Work Queue on the HBA
* @phba: HBA structure that indicates port to create a queue on.
* @wq: The queue structure to use to create the work queue.
@@ -9615,6 +9956,60 @@
}
/**
+ * lpfc_mq_destroy - Destroy a Mailbox Queue on the HBA
+ * @qm: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @mq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @mq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_mq_destroy(struct lpfc_hba *phba, struct lpfc_queue *mq)
+{
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (!mq)
+ return -ENODEV;
+ mbox = mempool_alloc(mq->phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_mq_destroy) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_MQ_DESTROY,
+ length, LPFC_SLI4_MBX_EMBED);
+ bf_set(lpfc_mbx_mq_destroy_q_id, &mbox->u.mqe.un.mq_destroy.u.request,
+ mq->queue_id);
+ mbox->vport = mq->phba->pport;
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ rc = lpfc_sli_issue_mbox(mq->phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mbox->u.mqe.un.mq_destroy.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2507 MQ_DESTROY mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ }
+ /* Remove mq from any list */
+ list_del_init(&mq->list);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, mq->phba->mbox_mem_pool);
+ return status;
+}
+
+/**
* lpfc_wq_destroy - Destroy a Work Queue on the HBA
* @wq: The queue structure associated with the queue to destroy.
*