include/asm-powerpc/rtas.h - kernel/msm-4.9 - Gitiles

 #ifndef _POWERPC_RTAS_H
 #define _POWERPC_RTAS_H
 #ifdef __KERNEL__

 #include <linux/spinlock.h>
 #include <asm/page.h>

 /*
  * Definitions for talking to the RTAS on CHRP machines.
  *
  * Copyright (C) 2001 Peter Bergner
  * Copyright (C) 2001 PPC 64 Team, IBM Corp
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */

 #define RTAS_UNKNOWN_SERVICE (-1)
 #define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */

 /* Buffer size for ppc_rtas system call. */
 #define RTAS_RMOBUF_MAX (64 * 1024)

 /* RTAS return status codes */
 #define RTAS_NOT_SUSPENDABLE	-9004
 #define RTAS_BUSY		-2    /* RTAS Busy */
 #define RTAS_EXTENDED_DELAY_MIN	9900
 #define RTAS_EXTENDED_DELAY_MAX	9905

 /*
  * In general to call RTAS use rtas_token("string") to lookup
  * an RTAS token for the given string (e.g. "event-scan").
  * To actually perform the call use
  *    ret = rtas_call(token, n_in, n_out, ...)
  * Where n_in is the number of input parameters and
  *       n_out is the number of output parameters
  *
  * If the "string" is invalid on this system, RTAS_UNKNOWN_SERVICE
  * will be returned as a token.  rtas_call() does look for this
  * token and error out gracefully so rtas_call(rtas_token("str"), ...)
  * may be safely used for one-shot calls to RTAS.
  *
  */

 typedef u32 rtas_arg_t;

 struct rtas_args {
 	u32 token;
 	u32 nargs;
 	u32 nret;
 	rtas_arg_t args[16];
 	rtas_arg_t *rets;     /* Pointer to return values in args[]. */
 };

 struct rtas_t {
 	unsigned long entry;		/* physical address pointer */
 	unsigned long base;		/* physical address pointer */
 	unsigned long size;
 	spinlock_t lock;
 	struct rtas_args args;
 	struct device_node *dev;	/* virtual address pointer */
 };

 /* RTAS event classes */
 #define RTAS_INTERNAL_ERROR		0x80000000 /* set bit 0 */
 #define RTAS_EPOW_WARNING		0x40000000 /* set bit 1 */
 #define RTAS_POWERMGM_EVENTS		0x20000000 /* set bit 2 */
 #define RTAS_HOTPLUG_EVENTS		0x10000000 /* set bit 3 */
 #define RTAS_EVENT_SCAN_ALL_EVENTS	0xf0000000

 /* RTAS event severity */
 #define RTAS_SEVERITY_FATAL		0x5
 #define RTAS_SEVERITY_ERROR		0x4
 #define RTAS_SEVERITY_ERROR_SYNC	0x3
 #define RTAS_SEVERITY_WARNING		0x2
 #define RTAS_SEVERITY_EVENT		0x1
 #define RTAS_SEVERITY_NO_ERROR		0x0

 /* RTAS event disposition */
 #define RTAS_DISP_FULLY_RECOVERED	0x0
 #define RTAS_DISP_LIMITED_RECOVERY	0x1
 #define RTAS_DISP_NOT_RECOVERED		0x2

 /* RTAS event initiator */
 #define RTAS_INITIATOR_UNKNOWN		0x0
 #define RTAS_INITIATOR_CPU		0x1
 #define RTAS_INITIATOR_PCI		0x2
 #define RTAS_INITIATOR_ISA		0x3
 #define RTAS_INITIATOR_MEMORY		0x4
 #define RTAS_INITIATOR_POWERMGM		0x5

 /* RTAS event target */
 #define RTAS_TARGET_UNKNOWN		0x0
 #define RTAS_TARGET_CPU			0x1
 #define RTAS_TARGET_PCI			0x2
 #define RTAS_TARGET_ISA			0x3
 #define RTAS_TARGET_MEMORY		0x4
 #define RTAS_TARGET_POWERMGM		0x5

 /* RTAS event type */
 #define RTAS_TYPE_RETRY			0x01
 #define RTAS_TYPE_TCE_ERR		0x02
 #define RTAS_TYPE_INTERN_DEV_FAIL	0x03
 #define RTAS_TYPE_TIMEOUT		0x04
 #define RTAS_TYPE_DATA_PARITY		0x05
 #define RTAS_TYPE_ADDR_PARITY		0x06
 #define RTAS_TYPE_CACHE_PARITY		0x07
 #define RTAS_TYPE_ADDR_INVALID		0x08
 #define RTAS_TYPE_ECC_UNCORR		0x09
 #define RTAS_TYPE_ECC_CORR		0x0a
 #define RTAS_TYPE_EPOW			0x40
 #define RTAS_TYPE_PLATFORM		0xE0
 #define RTAS_TYPE_IO			0xE1
 #define RTAS_TYPE_INFO			0xE2
 #define RTAS_TYPE_DEALLOC		0xE3
 #define RTAS_TYPE_DUMP			0xE4
 /* I don't add PowerMGM events right now, this is a different topic */
 #define RTAS_TYPE_PMGM_POWER_SW_ON	0x60
 #define RTAS_TYPE_PMGM_POWER_SW_OFF	0x61
 #define RTAS_TYPE_PMGM_LID_OPEN		0x62
 #define RTAS_TYPE_PMGM_LID_CLOSE	0x63
 #define RTAS_TYPE_PMGM_SLEEP_BTN	0x64
 #define RTAS_TYPE_PMGM_WAKE_BTN		0x65
 #define RTAS_TYPE_PMGM_BATTERY_WARN	0x66
 #define RTAS_TYPE_PMGM_BATTERY_CRIT	0x67
 #define RTAS_TYPE_PMGM_SWITCH_TO_BAT	0x68
 #define RTAS_TYPE_PMGM_SWITCH_TO_AC	0x69
 #define RTAS_TYPE_PMGM_KBD_OR_MOUSE	0x6a
 #define RTAS_TYPE_PMGM_ENCLOS_OPEN	0x6b
 #define RTAS_TYPE_PMGM_ENCLOS_CLOSED	0x6c
 #define RTAS_TYPE_PMGM_RING_INDICATE	0x6d
 #define RTAS_TYPE_PMGM_LAN_ATTENTION	0x6e
 #define RTAS_TYPE_PMGM_TIME_ALARM	0x6f
 #define RTAS_TYPE_PMGM_CONFIG_CHANGE	0x70
 #define RTAS_TYPE_PMGM_SERVICE_PROC	0x71

 struct rtas_error_log {
 	unsigned long version:8;		/* Architectural version */
 	unsigned long severity:3;		/* Severity level of error */
 	unsigned long disposition:2;		/* Degree of recovery */
 	unsigned long extended:1;		/* extended log present? */
 	unsigned long /* reserved */ :2;	/* Reserved for future use */
 	unsigned long initiator:4;		/* Initiator of event */
 	unsigned long target:4;			/* Target of failed operation */
 	unsigned long type:8;			/* General event or error*/
 	unsigned long extended_log_length:32;	/* length in bytes */
 	unsigned char buffer[1];
 };

 /*
  * This can be set by the rtas_flash module so that it can get called
  * as the absolutely last thing before the kernel terminates.
  */
 extern void (*rtas_flash_term_hook)(int);

 extern struct rtas_t rtas;

 extern void enter_rtas(unsigned long);
 extern int rtas_token(const char *service);
 extern int rtas_call(int token, int, int, int *, ...);
 extern void rtas_restart(char *cmd);
 extern void rtas_power_off(void);
 extern void rtas_halt(void);
 extern void rtas_os_term(char *str);
 extern int rtas_get_sensor(int sensor, int index, int *state);
 extern int rtas_get_power_level(int powerdomain, int *level);
 extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
 extern int rtas_set_indicator(int indicator, int index, int new_value);
 extern int rtas_set_indicator_fast(int indicator, int index, int new_value);
 extern void rtas_progress(char *s, unsigned short hex);
 extern void rtas_initialize(void);

 struct rtc_time;
 extern unsigned long rtas_get_boot_time(void);
 extern void rtas_get_rtc_time(struct rtc_time *rtc_time);
 extern int rtas_set_rtc_time(struct rtc_time *rtc_time);

 extern unsigned int rtas_busy_delay_time(int status);
 extern unsigned int rtas_busy_delay(int status);

 extern int early_init_dt_scan_rtas(unsigned long node,
 		const char *uname, int depth, void *data);

 extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);

 /* Error types logged.  */
 #define ERR_FLAG_ALREADY_LOGGED	0x0
 #define ERR_FLAG_BOOT		0x1 	/* log was pulled from NVRAM on boot */
 #define ERR_TYPE_RTAS_LOG	0x2	/* from rtas event-scan */
 #define ERR_TYPE_KERNEL_PANIC	0x4	/* from panic() */

 /* All the types and not flags */
 #define ERR_TYPE_MASK	(ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC)

 #define RTAS_DEBUG KERN_DEBUG "RTAS: "

 #define RTAS_ERROR_LOG_MAX 2048

 /*
  * Return the firmware-specified size of the error log buffer
  *  for all rtas calls that require an error buffer argument.
  *  This includes 'check-exception' and 'rtas-last-error'.
  */
 extern int rtas_get_error_log_max(void);

 /* Event Scan Parameters */
 #define EVENT_SCAN_ALL_EVENTS	0xf0000000
 #define SURVEILLANCE_TOKEN	9000
 #define LOG_NUMBER		64		/* must be a power of two */
 #define LOG_NUMBER_MASK		(LOG_NUMBER-1)

 /* Some RTAS ops require a data buffer and that buffer must be < 4G.
  * Rather than having a memory allocator, just use this buffer
  * (get the lock first), make the RTAS call.  Copy the data instead
  * of holding the buffer for long.
  */

 #define RTAS_DATA_BUF_SIZE 4096
 extern spinlock_t rtas_data_buf_lock;
 extern char rtas_data_buf[RTAS_DATA_BUF_SIZE];

 /* RMO buffer reserved for user-space RTAS use */
 extern unsigned long rtas_rmo_buf;

 #define GLOBAL_INTERRUPT_QUEUE 9005

 /**
  * rtas_config_addr - Format a busno, devfn and reg for RTAS.
  * @busno: The bus number.
  * @devfn: The device and function number as encoded by PCI_DEVFN().
  * @reg: The register number.
  *
  * This function encodes the given busno, devfn and register number as
  * required for RTAS calls that take a "config_addr" parameter.
  * See PAPR requirement 7.3.4-1 for more info.
  */
 static inline u32 rtas_config_addr(int busno, int devfn, int reg)
 {
 	return ((reg & 0xf00) << 20) | ((busno & 0xff) << 16) |
 			(devfn << 8) | (reg & 0xff);
 }

 #endif /* __KERNEL__ */
 #endif /* _POWERPC_RTAS_H */
	#ifndef _POWERPC_RTAS_H
	#define _POWERPC_RTAS_H
	#ifdef __KERNEL__

	#include <linux/spinlock.h>
	#include <asm/page.h>

	/*
	* Definitions for talking to the RTAS on CHRP machines.
	*
	* Copyright (C) 2001 Peter Bergner
	* Copyright (C) 2001 PPC 64 Team, IBM Corp
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version
	* 2 of the License, or (at your option) any later version.
	*/

	#define RTAS_UNKNOWN_SERVICE (-1)
	#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */

	/* Buffer size for ppc_rtas system call. */
	#define RTAS_RMOBUF_MAX (64 * 1024)

	/* RTAS return status codes */
	#define RTAS_NOT_SUSPENDABLE -9004
	#define RTAS_BUSY -2 /* RTAS Busy */
	#define RTAS_EXTENDED_DELAY_MIN 9900
	#define RTAS_EXTENDED_DELAY_MAX 9905

	/*
	* In general to call RTAS use rtas_token("string") to lookup
	* an RTAS token for the given string (e.g. "event-scan").
	* To actually perform the call use
	* ret = rtas_call(token, n_in, n_out, ...)
	* Where n_in is the number of input parameters and
	* n_out is the number of output parameters
	*
	* If the "string" is invalid on this system, RTAS_UNKNOWN_SERVICE
	* will be returned as a token. rtas_call() does look for this
	* token and error out gracefully so rtas_call(rtas_token("str"), ...)
	* may be safely used for one-shot calls to RTAS.
	*
	*/

	typedef u32 rtas_arg_t;

	struct rtas_args {
	u32 token;
	u32 nargs;
	u32 nret;
	rtas_arg_t args[16];
	rtas_arg_t rets; / Pointer to return values in args[]. */
	};

	struct rtas_t {
	unsigned long entry; /* physical address pointer */
	unsigned long base; /* physical address pointer */
	unsigned long size;
	spinlock_t lock;
	struct rtas_args args;
	struct device_node dev; / virtual address pointer */
	};

	/* RTAS event classes */
	#define RTAS_INTERNAL_ERROR 0x80000000 /* set bit 0 */
	#define RTAS_EPOW_WARNING 0x40000000 /* set bit 1 */
	#define RTAS_POWERMGM_EVENTS 0x20000000 /* set bit 2 */
	#define RTAS_HOTPLUG_EVENTS 0x10000000 /* set bit 3 */
	#define RTAS_EVENT_SCAN_ALL_EVENTS 0xf0000000

	/* RTAS event severity */
	#define RTAS_SEVERITY_FATAL 0x5
	#define RTAS_SEVERITY_ERROR 0x4
	#define RTAS_SEVERITY_ERROR_SYNC 0x3
	#define RTAS_SEVERITY_WARNING 0x2
	#define RTAS_SEVERITY_EVENT 0x1
	#define RTAS_SEVERITY_NO_ERROR 0x0

	/* RTAS event disposition */
	#define RTAS_DISP_FULLY_RECOVERED 0x0
	#define RTAS_DISP_LIMITED_RECOVERY 0x1
	#define RTAS_DISP_NOT_RECOVERED 0x2

	/* RTAS event initiator */
	#define RTAS_INITIATOR_UNKNOWN 0x0
	#define RTAS_INITIATOR_CPU 0x1
	#define RTAS_INITIATOR_PCI 0x2
	#define RTAS_INITIATOR_ISA 0x3
	#define RTAS_INITIATOR_MEMORY 0x4
	#define RTAS_INITIATOR_POWERMGM 0x5

	/* RTAS event target */
	#define RTAS_TARGET_UNKNOWN 0x0
	#define RTAS_TARGET_CPU 0x1
	#define RTAS_TARGET_PCI 0x2
	#define RTAS_TARGET_ISA 0x3
	#define RTAS_TARGET_MEMORY 0x4
	#define RTAS_TARGET_POWERMGM 0x5

	/* RTAS event type */
	#define RTAS_TYPE_RETRY 0x01
	#define RTAS_TYPE_TCE_ERR 0x02
	#define RTAS_TYPE_INTERN_DEV_FAIL 0x03
	#define RTAS_TYPE_TIMEOUT 0x04
	#define RTAS_TYPE_DATA_PARITY 0x05
	#define RTAS_TYPE_ADDR_PARITY 0x06
	#define RTAS_TYPE_CACHE_PARITY 0x07
	#define RTAS_TYPE_ADDR_INVALID 0x08
	#define RTAS_TYPE_ECC_UNCORR 0x09
	#define RTAS_TYPE_ECC_CORR 0x0a
	#define RTAS_TYPE_EPOW 0x40
	#define RTAS_TYPE_PLATFORM 0xE0
	#define RTAS_TYPE_IO 0xE1
	#define RTAS_TYPE_INFO 0xE2
	#define RTAS_TYPE_DEALLOC 0xE3
	#define RTAS_TYPE_DUMP 0xE4
	/* I don't add PowerMGM events right now, this is a different topic */
	#define RTAS_TYPE_PMGM_POWER_SW_ON 0x60
	#define RTAS_TYPE_PMGM_POWER_SW_OFF 0x61
	#define RTAS_TYPE_PMGM_LID_OPEN 0x62
	#define RTAS_TYPE_PMGM_LID_CLOSE 0x63
	#define RTAS_TYPE_PMGM_SLEEP_BTN 0x64
	#define RTAS_TYPE_PMGM_WAKE_BTN 0x65
	#define RTAS_TYPE_PMGM_BATTERY_WARN 0x66
	#define RTAS_TYPE_PMGM_BATTERY_CRIT 0x67
	#define RTAS_TYPE_PMGM_SWITCH_TO_BAT 0x68
	#define RTAS_TYPE_PMGM_SWITCH_TO_AC 0x69
	#define RTAS_TYPE_PMGM_KBD_OR_MOUSE 0x6a
	#define RTAS_TYPE_PMGM_ENCLOS_OPEN 0x6b
	#define RTAS_TYPE_PMGM_ENCLOS_CLOSED 0x6c
	#define RTAS_TYPE_PMGM_RING_INDICATE 0x6d
	#define RTAS_TYPE_PMGM_LAN_ATTENTION 0x6e
	#define RTAS_TYPE_PMGM_TIME_ALARM 0x6f
	#define RTAS_TYPE_PMGM_CONFIG_CHANGE 0x70
	#define RTAS_TYPE_PMGM_SERVICE_PROC 0x71

	struct rtas_error_log {
	unsigned long version:8; /* Architectural version */
	unsigned long severity:3; /* Severity level of error */
	unsigned long disposition:2; /* Degree of recovery */
	unsigned long extended:1; /* extended log present? */
	unsigned long /* reserved / :2; / Reserved for future use */
	unsigned long initiator:4; /* Initiator of event */
	unsigned long target:4; /* Target of failed operation */
	unsigned long type:8; /* General event or error*/
	unsigned long extended_log_length:32; /* length in bytes */
	unsigned char buffer[1];
	};

	/*
	* This can be set by the rtas_flash module so that it can get called
	* as the absolutely last thing before the kernel terminates.
	*/
	extern void (*rtas_flash_term_hook)(int);

	extern struct rtas_t rtas;

	extern void enter_rtas(unsigned long);
	extern int rtas_token(const char *service);
	extern int rtas_call(int token, int, int, int *, ...);
	extern void rtas_restart(char *cmd);
	extern void rtas_power_off(void);
	extern void rtas_halt(void);
	extern void rtas_os_term(char *str);
	extern int rtas_get_sensor(int sensor, int index, int *state);
	extern int rtas_get_power_level(int powerdomain, int *level);
	extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
	extern int rtas_set_indicator(int indicator, int index, int new_value);
	extern int rtas_set_indicator_fast(int indicator, int index, int new_value);
	extern void rtas_progress(char *s, unsigned short hex);
	extern void rtas_initialize(void);

	struct rtc_time;
	extern unsigned long rtas_get_boot_time(void);
	extern void rtas_get_rtc_time(struct rtc_time *rtc_time);
	extern int rtas_set_rtc_time(struct rtc_time *rtc_time);

	extern unsigned int rtas_busy_delay_time(int status);
	extern unsigned int rtas_busy_delay(int status);

	extern int early_init_dt_scan_rtas(unsigned long node,
	const char uname, int depth, void data);

	extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);

	/* Error types logged. */
	#define ERR_FLAG_ALREADY_LOGGED 0x0
	#define ERR_FLAG_BOOT 0x1 /* log was pulled from NVRAM on boot */
	#define ERR_TYPE_RTAS_LOG 0x2 /* from rtas event-scan */
	#define ERR_TYPE_KERNEL_PANIC 0x4 /* from panic() */

	/* All the types and not flags */
	#define ERR_TYPE_MASK (ERR_TYPE_RTAS_LOG \| ERR_TYPE_KERNEL_PANIC)

	#define RTAS_DEBUG KERN_DEBUG "RTAS: "

	#define RTAS_ERROR_LOG_MAX 2048

	/*
	* Return the firmware-specified size of the error log buffer
	* for all rtas calls that require an error buffer argument.
	* This includes 'check-exception' and 'rtas-last-error'.
	*/
	extern int rtas_get_error_log_max(void);

	/* Event Scan Parameters */
	#define EVENT_SCAN_ALL_EVENTS 0xf0000000
	#define SURVEILLANCE_TOKEN 9000
	#define LOG_NUMBER 64 /* must be a power of two */
	#define LOG_NUMBER_MASK (LOG_NUMBER-1)

	/* Some RTAS ops require a data buffer and that buffer must be < 4G.
	* Rather than having a memory allocator, just use this buffer
	* (get the lock first), make the RTAS call. Copy the data instead
	* of holding the buffer for long.
	*/

	#define RTAS_DATA_BUF_SIZE 4096
	extern spinlock_t rtas_data_buf_lock;
	extern char rtas_data_buf[RTAS_DATA_BUF_SIZE];

	/* RMO buffer reserved for user-space RTAS use */
	extern unsigned long rtas_rmo_buf;

	#define GLOBAL_INTERRUPT_QUEUE 9005

	/**
	* rtas_config_addr - Format a busno, devfn and reg for RTAS.
	* @busno: The bus number.
	* @devfn: The device and function number as encoded by PCI_DEVFN().
	* @reg: The register number.
	*
	* This function encodes the given busno, devfn and register number as
	* required for RTAS calls that take a "config_addr" parameter.
	* See PAPR requirement 7.3.4-1 for more info.
	*/
	static inline u32 rtas_config_addr(int busno, int devfn, int reg)
	{
	return ((reg & 0xf00) << 20) \| ((busno & 0xff) << 16) \|
	(devfn << 8) \| (reg & 0xff);
	}

	#endif /* __KERNEL__ */
	#endif /* _POWERPC_RTAS_H */