m68knommu: Add support for the Coldfire 5251/5253
Basic support for the Coldfire 5251/5253.
Signed-off-by: Steven king <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
diff --git a/arch/m68k/platform/coldfire/m525x.c b/arch/m68k/platform/coldfire/m525x.c
new file mode 100644
index 0000000..8ce905f
--- /dev/null
+++ b/arch/m68k/platform/coldfire/m525x.c
@@ -0,0 +1,66 @@
+/***************************************************************************/
+
+/*
+ * 525x.c
+ *
+ * Copyright (C) 2012, Steven King <sfking@fdwdc.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+static void __init m525x_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ /* set the GPIO function for the qspi cs gpios */
+ /* FIXME: replace with pinmux/pinctl support */
+ u32 f = readl(MCFSIM2_GPIOFUNC);
+ f |= (1 << MCFQSPI_CS2) | (1 << MCFQSPI_CS1) | (1 << MCFQSPI_CS0);
+ writel(f, MCFSIM2_GPIOFUNC);
+
+ /* QSPI irq setup */
+ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
+ MCF_MBAR + MCFSIM_QSPIICR);
+ mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+static void __init m525x_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_COLDFIRE)
+ u32 r;
+
+ /* first I2C controller uses regular irq setup */
+ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
+ MCF_MBAR + MCFSIM_I2CICR);
+ mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
+
+ /* second I2C controller is completely different */
+ r = readl(MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
+ r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1);
+ r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1);
+ writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
+#endif /* IS_ENABLED(CONFIG_I2C_COLDFIRE) */
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+ mach_sched_init = hw_timer_init;
+
+ m525x_qspi_init();
+ m525x_i2c_init();
+}
+
+/***************************************************************************/