libata: track SLEEP state and issue SRST to wake it up
ATA devices in SLEEP mode don't respond to any commands. SRST is
necessary to wake it up. Till now, when a command is issued to a
device in SLEEP mode, the command times out, which makes EH reset the
device and retry the command after that, causing a long delay.
This patch makes libata track SLEEP state and issue SRST automatically
if a command is about to be issued to a device in SLEEP.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Bruce Allen <ballen@gravity.phys.uwm.edu>
Cc: Andrew Paprocki <andrew@ishiboo.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 5aedd1a..50ae201 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5630,6 +5630,10 @@
ehi->dev_action[dev->devno] |= ATA_EH_REVALIDATE;
ata_port_schedule_eh(ap);
break;
+
+ case ATA_CMD_SLEEP:
+ dev->flags |= ATA_DFLAG_SLEEPING;
+ break;
}
__ata_qc_complete(qc);
@@ -5769,6 +5773,14 @@
qc->flags &= ~ATA_QCFLAG_DMAMAP;
}
+ /* if device is sleeping, schedule softreset and abort the link */
+ if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) {
+ link->eh_info.action |= ATA_EH_SOFTRESET;
+ ata_ehi_push_desc(&link->eh_info, "waking up from sleep");
+ ata_link_abort(link);
+ return;
+ }
+
ap->ops->qc_prep(qc);
qc->err_mask |= ap->ops->qc_issue(qc);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 8cb35bb..496edaf 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2208,9 +2208,11 @@
ata_link_for_each_dev(dev, link) {
/* After the reset, the device state is PIO 0
* and the controller state is undefined.
- * Record the mode.
+ * Reset also wakes up drives from sleeping
+ * mode.
*/
dev->pio_mode = XFER_PIO_0;
+ dev->flags &= ~ATA_DFLAG_SLEEPING;
if (ata_link_offline(link))
continue;
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 8263a7b..e21c002 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -180,6 +180,7 @@
ATA_CMD_VERIFY_EXT = 0x42,
ATA_CMD_STANDBYNOW1 = 0xE0,
ATA_CMD_IDLEIMMEDIATE = 0xE1,
+ ATA_CMD_SLEEP = 0xE6,
ATA_CMD_INIT_DEV_PARAMS = 0x91,
ATA_CMD_READ_NATIVE_MAX = 0xF8,
ATA_CMD_READ_NATIVE_MAX_EXT = 0x27,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 6fd24e0..2f0fc63 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -138,6 +138,7 @@
ATA_DFLAG_PIO = (1 << 12), /* device limited to PIO mode */
ATA_DFLAG_NCQ_OFF = (1 << 13), /* device limited to non-NCQ mode */
ATA_DFLAG_SPUNDOWN = (1 << 14), /* XXX: for spindown_compat */
+ ATA_DFLAG_SLEEPING = (1 << 15), /* device is sleeping */
ATA_DFLAG_INIT_MASK = (1 << 16) - 1,
ATA_DFLAG_DETACH = (1 << 16),