diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 6e412a6..92ac7e7 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -214,7 +214,7 @@
 		if (!(dev->flags & IFF_LOOPBACK))
 			continue;
 		if (dev_change_flags(dev, dev->flags | IFF_UP) < 0)
-			printk(KERN_ERR "IP-Config: Failed to open %s\n", dev->name);
+			pr_err("IP-Config: Failed to open %s\n", dev->name);
 	}
 
 	for_each_netdev(&init_net, dev) {
@@ -223,7 +223,8 @@
 			if (dev->mtu >= 364)
 				able |= IC_BOOTP;
 			else
-				printk(KERN_WARNING "DHCP/BOOTP: Ignoring device %s, MTU %d too small", dev->name, dev->mtu);
+				pr_warn("DHCP/BOOTP: Ignoring device %s, MTU %d too small",
+					dev->name, dev->mtu);
 			if (!(dev->flags & IFF_NOARP))
 				able |= IC_RARP;
 			able &= ic_proto_enabled;
@@ -231,7 +232,8 @@
 				continue;
 			oflags = dev->flags;
 			if (dev_change_flags(dev, oflags | IFF_UP) < 0) {
-				printk(KERN_ERR "IP-Config: Failed to open %s\n", dev->name);
+				pr_err("IP-Config: Failed to open %s\n",
+				       dev->name);
 				continue;
 			}
 			if (!(d = kmalloc(sizeof(struct ic_device), GFP_KERNEL))) {
@@ -273,9 +275,10 @@
 
 	if (!ic_first_dev) {
 		if (user_dev_name[0])
-			printk(KERN_ERR "IP-Config: Device `%s' not found.\n", user_dev_name);
+			pr_err("IP-Config: Device `%s' not found\n",
+			       user_dev_name);
 		else
-			printk(KERN_ERR "IP-Config: No network devices available.\n");
+			pr_err("IP-Config: No network devices available\n");
 		return -ENODEV;
 	}
 	return 0;
@@ -359,17 +362,20 @@
 	strcpy(ir.ifr_ifrn.ifrn_name, ic_dev->name);
 	set_sockaddr(sin, ic_myaddr, 0);
 	if ((err = ic_devinet_ioctl(SIOCSIFADDR, &ir)) < 0) {
-		printk(KERN_ERR "IP-Config: Unable to set interface address (%d).\n", err);
+		pr_err("IP-Config: Unable to set interface address (%d)\n",
+		       err);
 		return -1;
 	}
 	set_sockaddr(sin, ic_netmask, 0);
 	if ((err = ic_devinet_ioctl(SIOCSIFNETMASK, &ir)) < 0) {
-		printk(KERN_ERR "IP-Config: Unable to set interface netmask (%d).\n", err);
+		pr_err("IP-Config: Unable to set interface netmask (%d)\n",
+		       err);
 		return -1;
 	}
 	set_sockaddr(sin, ic_myaddr | ~ic_netmask, 0);
 	if ((err = ic_devinet_ioctl(SIOCSIFBRDADDR, &ir)) < 0) {
-		printk(KERN_ERR "IP-Config: Unable to set interface broadcast address (%d).\n", err);
+		pr_err("IP-Config: Unable to set interface broadcast address (%d)\n",
+		       err);
 		return -1;
 	}
 	/* Handle the case where we need non-standard MTU on the boot link (a network
@@ -380,8 +386,8 @@
 		strcpy(ir.ifr_name, ic_dev->name);
 		ir.ifr_mtu = ic_dev_mtu;
 		if ((err = ic_dev_ioctl(SIOCSIFMTU, &ir)) < 0)
-			printk(KERN_ERR "IP-Config: Unable to set interface mtu to %d (%d).\n",
-			                 ic_dev_mtu, err);
+			pr_err("IP-Config: Unable to set interface mtu to %d (%d)\n",
+			       ic_dev_mtu, err);
 	}
 	return 0;
 }
@@ -396,7 +402,7 @@
 
 		memset(&rm, 0, sizeof(rm));
 		if ((ic_gateway ^ ic_myaddr) & ic_netmask) {
-			printk(KERN_ERR "IP-Config: Gateway not on directly connected network.\n");
+			pr_err("IP-Config: Gateway not on directly connected network\n");
 			return -1;
 		}
 		set_sockaddr((struct sockaddr_in *) &rm.rt_dst, 0, 0);
@@ -404,7 +410,8 @@
 		set_sockaddr((struct sockaddr_in *) &rm.rt_gateway, ic_gateway, 0);
 		rm.rt_flags = RTF_UP | RTF_GATEWAY;
 		if ((err = ic_route_ioctl(SIOCADDRT, &rm)) < 0) {
-			printk(KERN_ERR "IP-Config: Cannot add default route (%d).\n", err);
+			pr_err("IP-Config: Cannot add default route (%d)\n",
+			       err);
 			return -1;
 		}
 	}
@@ -437,8 +444,8 @@
 		else if (IN_CLASSC(ntohl(ic_myaddr)))
 			ic_netmask = htonl(IN_CLASSC_NET);
 		else {
-			printk(KERN_ERR "IP-Config: Unable to guess netmask for address %pI4\n",
-				&ic_myaddr);
+			pr_err("IP-Config: Unable to guess netmask for address %pI4\n",
+			       &ic_myaddr);
 			return -1;
 		}
 		printk("IP-Config: Guessing netmask %pI4\n", &ic_netmask);
@@ -688,8 +695,8 @@
 			e += len;
 		}
 		if (*vendor_class_identifier) {
-			printk(KERN_INFO "DHCP: sending class identifier \"%s\"\n",
-			       vendor_class_identifier);
+			pr_info("DHCP: sending class identifier \"%s\"\n",
+				vendor_class_identifier);
 			*e++ = 60;	/* Class-identifier */
 			len = strlen(vendor_class_identifier);
 			*e++ = len;
@@ -949,8 +956,7 @@
 	/* Fragments are not supported */
 	if (ip_is_fragment(h)) {
 		if (net_ratelimit())
-			printk(KERN_ERR "DHCP/BOOTP: Ignoring fragmented "
-			       "reply.\n");
+			pr_err("DHCP/BOOTP: Ignoring fragmented reply\n");
 		goto drop;
 	}
 
@@ -999,8 +1005,7 @@
 	if (b->op != BOOTP_REPLY ||
 	    b->xid != d->xid) {
 		if (net_ratelimit())
-			printk(KERN_ERR "DHCP/BOOTP: Reply not for us, "
-			       "op[%x] xid[%x]\n",
+			pr_err("DHCP/BOOTP: Reply not for us, op[%x] xid[%x]\n",
 			       b->op, b->xid);
 		goto drop_unlock;
 	}
@@ -1008,7 +1013,7 @@
 	/* Is it a reply for the device we are configuring? */
 	if (b->xid != ic_dev_xid) {
 		if (net_ratelimit())
-			printk(KERN_ERR "DHCP/BOOTP: Ignoring delayed packet\n");
+			pr_err("DHCP/BOOTP: Ignoring delayed packet\n");
 		goto drop_unlock;
 	}
 
@@ -1146,17 +1151,17 @@
 	 * are missing, and without DHCP/BOOTP/RARP we are unable to get it.
 	 */
 	if (!ic_proto_enabled) {
-		printk(KERN_ERR "IP-Config: Incomplete network configuration information.\n");
+		pr_err("IP-Config: Incomplete network configuration information\n");
 		return -1;
 	}
 
 #ifdef IPCONFIG_BOOTP
 	if ((ic_proto_enabled ^ ic_proto_have_if) & IC_BOOTP)
-		printk(KERN_ERR "DHCP/BOOTP: No suitable device found.\n");
+		pr_err("DHCP/BOOTP: No suitable device found\n");
 #endif
 #ifdef IPCONFIG_RARP
 	if ((ic_proto_enabled ^ ic_proto_have_if) & IC_RARP)
-		printk(KERN_ERR "RARP: No suitable device found.\n");
+		pr_err("RARP: No suitable device found\n");
 #endif
 
 	if (!ic_proto_have_if)
@@ -1183,11 +1188,11 @@
 	 * [Actually we could now, but the nothing else running note still
 	 *  applies.. - AC]
 	 */
-	printk(KERN_NOTICE "Sending %s%s%s requests .",
-	       do_bootp
-		? ((ic_proto_enabled & IC_USE_DHCP) ? "DHCP" : "BOOTP") : "",
-	       (do_bootp && do_rarp) ? " and " : "",
-	       do_rarp ? "RARP" : "");
+	pr_notice("Sending %s%s%s requests .",
+		  do_bootp
+		  ? ((ic_proto_enabled & IC_USE_DHCP) ? "DHCP" : "BOOTP") : "",
+		  (do_bootp && do_rarp) ? " and " : "",
+		  do_rarp ? "RARP" : "");
 
 	start_jiffies = jiffies;
 	d = ic_first_dev;
@@ -1216,13 +1221,13 @@
 		    (ic_proto_enabled & IC_USE_DHCP) &&
 		    ic_dhcp_msgtype != DHCPACK) {
 			ic_got_reply = 0;
-			printk(KERN_CONT ",");
+			pr_cont(",");
 			continue;
 		}
 #endif /* IPCONFIG_DHCP */
 
 		if (ic_got_reply) {
-			printk(KERN_CONT " OK\n");
+			pr_cont(" OK\n");
 			break;
 		}
 
@@ -1230,7 +1235,7 @@
 			continue;
 
 		if (! --retries) {
-			printk(KERN_CONT " timed out!\n");
+			pr_cont(" timed out!\n");
 			break;
 		}
 
@@ -1240,7 +1245,7 @@
 		if (timeout > CONF_TIMEOUT_MAX)
 			timeout = CONF_TIMEOUT_MAX;
 
-		printk(KERN_CONT ".");
+		pr_cont(".");
 	}
 
 #ifdef IPCONFIG_BOOTP
@@ -1260,8 +1265,8 @@
 	printk("IP-Config: Got %s answer from %pI4, ",
 		((ic_got_reply & IC_RARP) ? "RARP"
 		 : (ic_proto_enabled & IC_USE_DHCP) ? "DHCP" : "BOOTP"),
-		&ic_servaddr);
-	printk(KERN_CONT "my address is %pI4\n", &ic_myaddr);
+	       &ic_servaddr);
+	pr_cont("my address is %pI4\n", &ic_myaddr);
 
 	return 0;
 }
@@ -1437,24 +1442,22 @@
 			 */
 #ifdef CONFIG_ROOT_NFS
 			if (ROOT_DEV ==  Root_NFS) {
-				printk(KERN_ERR
-					"IP-Config: Retrying forever (NFS root)...\n");
+				pr_err("IP-Config: Retrying forever (NFS root)...\n");
 				goto try_try_again;
 			}
 #endif
 
 			if (--retries) {
-				printk(KERN_ERR
-				       "IP-Config: Reopening network devices...\n");
+				pr_err("IP-Config: Reopening network devices...\n");
 				goto try_try_again;
 			}
 
 			/* Oh, well.  At least we tried. */
-			printk(KERN_ERR "IP-Config: Auto-configuration of network failed.\n");
+			pr_err("IP-Config: Auto-configuration of network failed\n");
 			return -1;
 		}
 #else /* !DYNAMIC */
-		printk(KERN_ERR "IP-Config: Incomplete network configuration information.\n");
+		pr_err("IP-Config: Incomplete network configuration information\n");
 		ic_close_devs();
 		return -1;
 #endif /* IPCONFIG_DYNAMIC */
@@ -1492,19 +1495,16 @@
 	/*
 	 * Clue in the operator.
 	 */
-	printk("IP-Config: Complete:\n");
-	printk("     device=%s", ic_dev->name);
-	printk(KERN_CONT ", addr=%pI4", &ic_myaddr);
-	printk(KERN_CONT ", mask=%pI4", &ic_netmask);
-	printk(KERN_CONT ", gw=%pI4", &ic_gateway);
-	printk(KERN_CONT ",\n     host=%s, domain=%s, nis-domain=%s",
-	       utsname()->nodename, ic_domain, utsname()->domainname);
-	printk(KERN_CONT ",\n     bootserver=%pI4", &ic_servaddr);
-	printk(KERN_CONT ", rootserver=%pI4", &root_server_addr);
-	printk(KERN_CONT ", rootpath=%s", root_server_path);
+	pr_info("IP-Config: Complete:\n");
+	pr_info("     device=%s, addr=%pI4, mask=%pI4, gw=%pI4\n",
+		ic_dev->name, &ic_myaddr, &ic_netmask, &ic_gateway);
+	pr_info("     host=%s, domain=%s, nis-domain=%s\n",
+		utsname()->nodename, ic_domain, utsname()->domainname);
+	pr_info("     bootserver=%pI4, rootserver=%pI4, rootpath=%s",
+		&ic_servaddr, &root_server_addr, root_server_path);
 	if (ic_dev_mtu)
-		printk(KERN_CONT ", mtu=%d", ic_dev_mtu);
-	printk(KERN_CONT "\n");
+		pr_cont(", mtu=%d", ic_dev_mtu);
+	pr_cont("\n");
 #endif /* !SILENT */
 
 	return 0;
@@ -1637,8 +1637,8 @@
 	if (strlcpy(vendor_class_identifier, addrs,
 		    sizeof(vendor_class_identifier))
 	    >= sizeof(vendor_class_identifier))
-		printk(KERN_WARNING "DHCP: vendorclass too long, truncated to \"%s\"",
-		       vendor_class_identifier);
+		pr_warn("DHCP: vendorclass too long, truncated to \"%s\"",
+			vendor_class_identifier);
 	return 1;
 }