drm/sti: adapt YUV colorspace in display pipeline
Use BT601 for SD/ED resolution and BT709 for HD resolution
Signed-off-by: Bich Hemon <bich.hemon@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
diff --git a/drivers/gpu/drm/sti/sti_vid.c b/drivers/gpu/drm/sti/sti_vid.c
index a8254cc..0a1e50c 100644
--- a/drivers/gpu/drm/sti/sti_vid.c
+++ b/drivers/gpu/drm/sti/sti_vid.c
@@ -42,6 +42,17 @@
#define VID_MPR1_BT709 0x0AC50000
#define VID_MPR2_BT709 0x07150545
#define VID_MPR3_BT709 0x00000AE8
+/* YCbCr to RGB BT709:
+ * R = Y+1.3711Cr
+ * G = Y-0.6992Cr-0.3359Cb
+ * B = Y+1.7344Cb
+ */
+#define VID_MPR0_BT601 0x0A800000
+#define VID_MPR1_BT601 0x0AAF0000
+#define VID_MPR2_BT601 0x094E0754
+#define VID_MPR3_BT601 0x00000ADD
+
+#define VID_MIN_HD_HEIGHT 720
void sti_vid_commit(struct sti_vid *vid,
struct drm_plane_state *state)
@@ -52,6 +63,7 @@
int dst_y = state->crtc_y;
int dst_w = clamp_val(state->crtc_w, 0, mode->crtc_hdisplay - dst_x);
int dst_h = clamp_val(state->crtc_h, 0, mode->crtc_vdisplay - dst_y);
+ int src_h = state->src_h >> 16;
u32 val, ydo, xdo, yds, xds;
/* Input / output size
@@ -71,6 +83,19 @@
writel((ydo << 16) | xdo, vid->regs + VID_VPO);
writel((yds << 16) | xds, vid->regs + VID_VPS);
+
+ /* Color conversion parameters */
+ if (src_h >= VID_MIN_HD_HEIGHT) {
+ writel(VID_MPR0_BT709, vid->regs + VID_MPR0);
+ writel(VID_MPR1_BT709, vid->regs + VID_MPR1);
+ writel(VID_MPR2_BT709, vid->regs + VID_MPR2);
+ writel(VID_MPR3_BT709, vid->regs + VID_MPR3);
+ } else {
+ writel(VID_MPR0_BT601, vid->regs + VID_MPR0);
+ writel(VID_MPR1_BT601, vid->regs + VID_MPR1);
+ writel(VID_MPR2_BT601, vid->regs + VID_MPR2);
+ writel(VID_MPR3_BT601, vid->regs + VID_MPR3);
+ }
}
void sti_vid_disable(struct sti_vid *vid)
@@ -91,12 +116,6 @@
/* Opaque */
writel(VID_ALP_OPAQUE, vid->regs + VID_ALP);
- /* Color conversion parameters */
- writel(VID_MPR0_BT709, vid->regs + VID_MPR0);
- writel(VID_MPR1_BT709, vid->regs + VID_MPR1);
- writel(VID_MPR2_BT709, vid->regs + VID_MPR2);
- writel(VID_MPR3_BT709, vid->regs + VID_MPR3);
-
/* Brightness, contrast, tint, saturation */
writel(VID_BC_DFLT, vid->regs + VID_BC);
writel(VID_TINT_DFLT, vid->regs + VID_TINT);