netxen: napi and irq cleanup
o separate and simpler irq handler for msi interrupts, avoids few checks
than legacy mode.
o avoid redudant tx_has_work() and rx_has_work() checks in interrupt
and napi, which can uncork irq based on racy (lockless) access to tx
and rx ring indices. If we get interrupt, there's sufficient reason to
schedule napi.
o replenish rx ring more often, remove self-imposed threshold rcv_free
that prevents posting rx desc to card. This improves performance in
low memory.
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Tested-by: Vernon Mauery <mauery@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 43eb1f6..64fc18d 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -185,7 +185,6 @@
for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
struct netxen_rx_buffer *rx_buf;
rcv_desc = &adapter->recv_ctx[ctxid].rcv_desc[ring];
- rcv_desc->rcv_free = rcv_desc->max_rx_desc_count;
rcv_desc->begin_alloc = 0;
rx_buf = rcv_desc->rx_buf_arr;
num_rx_bufs = rcv_desc->max_rx_desc_count;
@@ -976,28 +975,6 @@
return 0;
}
-int netxen_nic_rx_has_work(struct netxen_adapter *adapter)
-{
- int ctx;
-
- for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
- struct netxen_recv_context *recv_ctx =
- &(adapter->recv_ctx[ctx]);
- u32 consumer;
- struct status_desc *desc_head;
- struct status_desc *desc;
-
- consumer = recv_ctx->status_rx_consumer;
- desc_head = recv_ctx->rcv_status_desc_head;
- desc = &desc_head[consumer];
-
- if (netxen_get_sts_owner(desc) & STATUS_OWNER_HOST)
- return 1;
- }
-
- return 0;
-}
-
static int netxen_nic_check_temp(struct netxen_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
@@ -1040,7 +1017,6 @@
void netxen_watchdog_task(struct work_struct *work)
{
- struct net_device *netdev;
struct netxen_adapter *adapter =
container_of(work, struct netxen_adapter, watchdog_task);
@@ -1050,20 +1026,6 @@
if (adapter->handle_phy_intr)
adapter->handle_phy_intr(adapter);
- netdev = adapter->netdev;
- if ((netif_running(netdev)) && !netif_carrier_ok(netdev) &&
- netxen_nic_link_ok(adapter) ) {
- printk(KERN_INFO "%s %s (port %d), Link is up\n",
- netxen_nic_driver_name, netdev->name, adapter->portnum);
- netif_carrier_on(netdev);
- netif_wake_queue(netdev);
- } else if(!(netif_running(netdev)) && netif_carrier_ok(netdev)) {
- printk(KERN_ERR "%s %s Link is Down\n",
- netxen_nic_driver_name, netdev->name);
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
- }
-
mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
}
@@ -1177,7 +1139,6 @@
netdev->last_rx = jiffies;
- rcv_desc->rcv_free++;
rcv_desc->rcv_pending--;
/*
@@ -1202,13 +1163,6 @@
u32 producer = 0;
int count = 0, ring;
- DPRINTK(INFO, "procesing receive\n");
- /*
- * we assume in this case that there is only one port and that is
- * port #1...changes need to be done in firmware to indicate port
- * number as part of the descriptor. This way we will be able to get
- * the netdev which is associated with that device.
- */
while (count < max) {
desc = &desc_head[consumer];
if (!(netxen_get_sts_owner(desc) & STATUS_OWNER_HOST)) {
@@ -1221,10 +1175,8 @@
consumer = (consumer + 1) & (adapter->max_rx_desc_count - 1);
count++;
}
- if (count) {
- for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
- netxen_post_rx_buffers_nodb(adapter, ctxid, ring);
- }
+ for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
+ netxen_post_rx_buffers_nodb(adapter, ctxid, ring);
}
/* update the consumer index in phantom */
@@ -1235,20 +1187,18 @@
/* Window = 1 */
writel(consumer,
NETXEN_CRB_NORMALIZE(adapter,
- recv_crb_registers[adapter->portnum].
+ recv_crb_registers[adapter->portnum].
crb_rcv_status_consumer));
- wmb();
}
return count;
}
/* Process Command status ring */
-int netxen_process_cmd_ring(unsigned long data)
+int netxen_process_cmd_ring(struct netxen_adapter *adapter)
{
u32 last_consumer;
u32 consumer;
- struct netxen_adapter *adapter = (struct netxen_adapter *)data;
int count1 = 0;
int count2 = 0;
struct netxen_cmd_buffer *buffer;
@@ -1435,8 +1385,6 @@
rcv_desc->begin_alloc = index;
rcv_desc->rcv_pending += count;
rcv_desc->producer = producer;
- if (rcv_desc->rcv_free >= 32) {
- rcv_desc->rcv_free = 0;
/* Window = 1 */
writel((producer - 1) &
(rcv_desc->max_rx_desc_count - 1),
@@ -1460,8 +1408,6 @@
writel(msg,
DB_NORMALIZE(adapter,
NETXEN_RCV_PRODUCER_OFFSET));
- wmb();
- }
}
}
@@ -1525,8 +1471,6 @@
rcv_desc->begin_alloc = index;
rcv_desc->rcv_pending += count;
rcv_desc->producer = producer;
- if (rcv_desc->rcv_free >= 32) {
- rcv_desc->rcv_free = 0;
/* Window = 1 */
writel((producer - 1) &
(rcv_desc->max_rx_desc_count - 1),
@@ -1536,21 +1480,9 @@
rcv_desc_crb[ringid].
crb_rcv_producer_offset));
wmb();
- }
}
}
-int netxen_nic_tx_has_work(struct netxen_adapter *adapter)
-{
- if (find_diff_among(adapter->last_cmd_consumer,
- adapter->cmd_producer,
- adapter->max_tx_desc_count) > 0)
- return 1;
-
- return 0;
-}
-
-
void netxen_nic_clear_stats(struct netxen_adapter *adapter)
{
memset(&adapter->stats, 0, sizeof(adapter->stats));