arm64: fix soft lockup due to large tlb flush range

Under certain loads, this soft lockup has been observed:

   BUG: soft lockup - CPU#2 stuck for 22s! [ip6tables:1016]
   Modules linked in: ip6t_rpfilter ip6t_REJECT cfg80211 rfkill xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw vfat fat efivarfs xfs libcrc32c

   CPU: 2 PID: 1016 Comm: ip6tables Not tainted 3.13.0-0.rc7.30.sa2.aarch64 #1
   task: fffffe03e81d1400 ti: fffffe03f01f8000 task.ti: fffffe03f01f8000
   PC is at __cpu_flush_kern_tlb_range+0xc/0x40
   LR is at __purge_vmap_area_lazy+0x28c/0x3ac
   pc : [<fffffe000009c5cc>] lr : [<fffffe0000182710>] pstate: 80000145
   sp : fffffe03f01fbb70
   x29: fffffe03f01fbb70 x28: fffffe03f01f8000
   x27: fffffe0000b19000 x26: 00000000000000d0
   x25: 000000000000001c x24: fffffe03f01fbc50
   x23: fffffe03f01fbc58 x22: fffffe03f01fbc10
   x21: fffffe0000b2a3f8 x20: 0000000000000802
   x19: fffffe0000b2a3c8 x18: 000003fffdf52710
   x17: 000003ff9d8bb910 x16: fffffe000050fbfc
   x15: 0000000000005735 x14: 000003ff9d7e1a5c
   x13: 0000000000000000 x12: 000003ff9d7e1a5c
   x11: 0000000000000007 x10: fffffe0000c09af0
   x9 : fffffe0000ad1000 x8 : 000000000000005c
   x7 : fffffe03e8624000 x6 : 0000000000000000
   x5 : 0000000000000000 x4 : 0000000000000000
   x3 : fffffe0000c09cc8 x2 : 0000000000000000
   x1 : 000fffffdfffca80 x0 : 000fffffcd742150

The __cpu_flush_kern_tlb_range() function looks like:

  ENTRY(__cpu_flush_kern_tlb_range)
	dsb	sy
	lsr	x0, x0, #12
	lsr	x1, x1, #12
  1:	tlbi	vaae1is, x0
	add	x0, x0, #1
	cmp	x0, x1
	b.lo	1b
	dsb	sy
	isb
	ret
  ENDPROC(__cpu_flush_kern_tlb_range)

The above soft lockup shows the PC at tlbi insn with:

  x0 = 0x000fffffcd742150
  x1 = 0x000fffffdfffca80

So __cpu_flush_kern_tlb_range has 0x128ba930 tlbi flushes left
after it has already been looping for 23 seconds!.

Looking up one frame at __purge_vmap_area_lazy(), there is:

	...
	list_for_each_entry_rcu(va, &vmap_area_list, list) {
		if (va->flags & VM_LAZY_FREE) {
			if (va->va_start < *start)
				*start = va->va_start;
			if (va->va_end > *end)
				*end = va->va_end;
			nr += (va->va_end - va->va_start) >> PAGE_SHIFT;
			list_add_tail(&va->purge_list, &valist);
			va->flags |= VM_LAZY_FREEING;
			va->flags &= ~VM_LAZY_FREE;
		}
	}
	...
	if (nr || force_flush)
		flush_tlb_kernel_range(*start, *end);

So if two areas are being freed, the range passed to
flush_tlb_kernel_range() may be as large as the vmalloc
space. For arm64, this is ~240GB for 4k pagesize and ~2TB
for 64kpage size.

This patch works around this problem by adding a loop limit.
If the range is larger than the limit, use flush_tlb_all()
rather than flushing based on individual pages. The limit
chosen is arbitrary as the TLB size is implementation
specific and not accessible in an architected way. The aim
of the arbitrary limit is to avoid soft lockup.

Signed-off-by: Mark Salter <msalter@redhat.com>
[catalin.marinas@arm.com: commit log update]
[catalin.marinas@arm.com: marginal optimisation]
[catalin.marinas@arm.com: changed to MAX_TLB_RANGE and added comment]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
1 file changed