mac80211: use nl80211 interface types
There's really no reason for mac80211 to be using its
own interface type defines. Use the nl80211 types and
simplify the configuration code a bit: there's no need
to translate them any more now.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 33530b2..8c3dda5 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -295,7 +295,7 @@
if (!netif_running(sdata->dev))
continue;
- if (sdata->vif.type != IEEE80211_IF_TYPE_MNTR)
+ if (sdata->vif.type != NL80211_IFTYPE_MONITOR)
continue;
if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES)
@@ -512,7 +512,7 @@
if (unlikely((ieee80211_is_data(hdr->frame_control) ||
ieee80211_is_pspoll(hdr->frame_control)) &&
- rx->sdata->vif.type != IEEE80211_IF_TYPE_IBSS &&
+ rx->sdata->vif.type != NL80211_IFTYPE_ADHOC &&
(!rx->sta || !test_sta_flags(rx->sta, WLAN_STA_ASSOC)))) {
if ((!ieee80211_has_fromds(hdr->frame_control) &&
!ieee80211_has_tods(hdr->frame_control) &&
@@ -724,14 +724,14 @@
/* Update last_rx only for IBSS packets which are for the current
* BSSID to avoid keeping the current IBSS network alive in cases where
* other STAs are using different BSSID. */
- if (rx->sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
+ if (rx->sdata->vif.type == NL80211_IFTYPE_ADHOC) {
u8 *bssid = ieee80211_get_bssid(hdr, rx->skb->len,
- IEEE80211_IF_TYPE_IBSS);
+ NL80211_IFTYPE_ADHOC);
if (compare_ether_addr(bssid, rx->sdata->u.sta.bssid) == 0)
sta->last_rx = jiffies;
} else
if (!is_multicast_ether_addr(hdr->addr1) ||
- rx->sdata->vif.type == IEEE80211_IF_TYPE_STA) {
+ rx->sdata->vif.type == NL80211_IFTYPE_STATION) {
/* Update last_rx only for unicast frames in order to prevent
* the Probe Request frames (the only broadcast frames from a
* STA in infrastructure mode) from keeping a connection alive.
@@ -751,8 +751,8 @@
sta->last_noise = rx->status->noise;
if (!ieee80211_has_morefrags(hdr->frame_control) &&
- (rx->sdata->vif.type == IEEE80211_IF_TYPE_AP ||
- rx->sdata->vif.type == IEEE80211_IF_TYPE_VLAN)) {
+ (rx->sdata->vif.type == NL80211_IFTYPE_AP ||
+ rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)) {
/* Change STA power saving mode only in the end of a frame
* exchange sequence */
if (test_sta_flags(sta, WLAN_STA_PS) &&
@@ -982,8 +982,8 @@
!(rx->flags & IEEE80211_RX_RA_MATCH)))
return RX_CONTINUE;
- if ((sdata->vif.type != IEEE80211_IF_TYPE_AP) &&
- (sdata->vif.type != IEEE80211_IF_TYPE_VLAN))
+ if ((sdata->vif.type != NL80211_IFTYPE_AP) &&
+ (sdata->vif.type != NL80211_IFTYPE_AP_VLAN))
return RX_DROP_UNUSABLE;
skb = skb_dequeue(&rx->sta->tx_filtered);
@@ -1131,23 +1131,23 @@
switch (hdr->frame_control &
cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
case __constant_cpu_to_le16(IEEE80211_FCTL_TODS):
- if (unlikely(sdata->vif.type != IEEE80211_IF_TYPE_AP &&
- sdata->vif.type != IEEE80211_IF_TYPE_VLAN))
+ if (unlikely(sdata->vif.type != NL80211_IFTYPE_AP &&
+ sdata->vif.type != NL80211_IFTYPE_AP_VLAN))
return -1;
break;
case __constant_cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS):
- if (unlikely(sdata->vif.type != IEEE80211_IF_TYPE_WDS &&
- sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT))
+ if (unlikely(sdata->vif.type != NL80211_IFTYPE_WDS &&
+ sdata->vif.type != NL80211_IFTYPE_MESH_POINT))
return -1;
break;
case __constant_cpu_to_le16(IEEE80211_FCTL_FROMDS):
- if (sdata->vif.type != IEEE80211_IF_TYPE_STA ||
+ if (sdata->vif.type != NL80211_IFTYPE_STATION ||
(is_multicast_ether_addr(dst) &&
!compare_ether_addr(src, dev->dev_addr)))
return -1;
break;
case __constant_cpu_to_le16(0):
- if (sdata->vif.type != IEEE80211_IF_TYPE_IBSS)
+ if (sdata->vif.type != NL80211_IFTYPE_ADHOC)
return -1;
break;
}
@@ -1221,8 +1221,8 @@
skb = rx->skb;
xmit_skb = NULL;
- if ((sdata->vif.type == IEEE80211_IF_TYPE_AP ||
- sdata->vif.type == IEEE80211_IF_TYPE_VLAN) &&
+ if ((sdata->vif.type == NL80211_IFTYPE_AP ||
+ sdata->vif.type == NL80211_IFTYPE_AP_VLAN) &&
!(sdata->flags & IEEE80211_SDATA_DONT_BRIDGE_PACKETS) &&
(rx->flags & IEEE80211_RX_RA_MATCH)) {
if (is_multicast_ether_addr(ehdr->h_dest)) {
@@ -1536,8 +1536,8 @@
* FIXME: revisit this, I'm sure we should handle most
* of these frames in other modes as well!
*/
- if (sdata->vif.type != IEEE80211_IF_TYPE_STA &&
- sdata->vif.type != IEEE80211_IF_TYPE_IBSS)
+ if (sdata->vif.type != NL80211_IFTYPE_STATION &&
+ sdata->vif.type != NL80211_IFTYPE_ADHOC)
return RX_DROP_MONITOR;
switch (mgmt->u.action.category) {
@@ -1595,8 +1595,8 @@
if (ieee80211_vif_is_mesh(&sdata->vif))
return ieee80211_mesh_rx_mgmt(sdata, rx->skb, rx->status);
- if (sdata->vif.type != IEEE80211_IF_TYPE_STA &&
- sdata->vif.type != IEEE80211_IF_TYPE_IBSS)
+ if (sdata->vif.type != NL80211_IFTYPE_STATION &&
+ sdata->vif.type != NL80211_IFTYPE_ADHOC)
return RX_DROP_MONITOR;
if (sdata->flags & IEEE80211_SDATA_USERSPACE_MLME)
@@ -1632,7 +1632,7 @@
if (!ieee80211_has_protected(hdr->frame_control))
goto ignore;
- if (rx->sdata->vif.type == IEEE80211_IF_TYPE_AP && keyidx) {
+ if (rx->sdata->vif.type == NL80211_IFTYPE_AP && keyidx) {
/*
* APs with pairwise keys should never receive Michael MIC
* errors for non-zero keyidx because these are reserved for
@@ -1702,7 +1702,7 @@
if (!netif_running(sdata->dev))
continue;
- if (sdata->vif.type != IEEE80211_IF_TYPE_MNTR ||
+ if (sdata->vif.type != NL80211_IFTYPE_MONITOR ||
!(sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES))
continue;
@@ -1801,7 +1801,7 @@
int multicast = is_multicast_ether_addr(hdr->addr1);
switch (sdata->vif.type) {
- case IEEE80211_IF_TYPE_STA:
+ case NL80211_IFTYPE_STATION:
if (!bssid)
return 0;
if (!ieee80211_bssid_match(bssid, sdata->u.sta.bssid)) {
@@ -1816,7 +1816,7 @@
rx->flags &= ~IEEE80211_RX_RA_MATCH;
}
break;
- case IEEE80211_IF_TYPE_IBSS:
+ case NL80211_IFTYPE_ADHOC:
if (!bssid)
return 0;
if (ieee80211_is_beacon(hdr->frame_control)) {
@@ -1837,7 +1837,7 @@
bssid, hdr->addr2,
BIT(rx->status->rate_idx));
break;
- case IEEE80211_IF_TYPE_MESH_POINT:
+ case NL80211_IFTYPE_MESH_POINT:
if (!multicast &&
compare_ether_addr(sdata->dev->dev_addr,
hdr->addr1) != 0) {
@@ -1847,8 +1847,8 @@
rx->flags &= ~IEEE80211_RX_RA_MATCH;
}
break;
- case IEEE80211_IF_TYPE_VLAN:
- case IEEE80211_IF_TYPE_AP:
+ case NL80211_IFTYPE_AP_VLAN:
+ case NL80211_IFTYPE_AP:
if (!bssid) {
if (compare_ether_addr(sdata->dev->dev_addr,
hdr->addr1))
@@ -1860,16 +1860,17 @@
rx->flags &= ~IEEE80211_RX_RA_MATCH;
}
break;
- case IEEE80211_IF_TYPE_WDS:
+ case NL80211_IFTYPE_WDS:
if (bssid || !ieee80211_is_data(hdr->frame_control))
return 0;
if (compare_ether_addr(sdata->u.wds.remote_addr, hdr->addr2))
return 0;
break;
- case IEEE80211_IF_TYPE_MNTR:
+ case NL80211_IFTYPE_MONITOR:
/* take everything */
break;
- case IEEE80211_IF_TYPE_INVALID:
+ case NL80211_IFTYPE_UNSPECIFIED:
+ case __NL80211_IFTYPE_AFTER_LAST:
/* should never get here */
WARN_ON(1);
break;
@@ -1930,7 +1931,7 @@
if (!netif_running(sdata->dev))
continue;
- if (sdata->vif.type == IEEE80211_IF_TYPE_MNTR)
+ if (sdata->vif.type == NL80211_IFTYPE_MONITOR)
continue;
bssid = ieee80211_get_bssid(hdr, skb->len, sdata->vif.type);