mfd: cros_ec: Move protocol helpers out of the MFD driver

The MFD driver should only have the logic to instantiate its child devices
and setup any shared resources that will be used by the subdevices drivers.

The cros_ec MFD is more complex than expected since it also has helpers to
communicate with the EC. So the driver will only get more bigger as other
protocols are supported in the future. So move the communication protocol
helpers to its own driver as drivers/platform/chrome/cros_ec_proto.c.

Suggested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
index 2a6531a..cb13299 100644
--- a/drivers/platform/chrome/Kconfig
+++ b/drivers/platform/chrome/Kconfig
@@ -40,7 +40,7 @@
 
 config CROS_EC_CHARDEV
         tristate "Chrome OS Embedded Controller userspace device interface"
-        depends on MFD_CROS_EC
+        depends on CROS_EC_PROTO
         ---help---
           This driver adds support to talk with the ChromeOS EC from userspace.
 
@@ -49,7 +49,7 @@
 
 config CROS_EC_LPC
         tristate "ChromeOS Embedded Controller (LPC)"
-        depends on MFD_CROS_EC && (X86 || COMPILE_TEST)
+        depends on MFD_CROS_EC && CROS_EC_PROTO && (X86 || COMPILE_TEST)
         help
           If you say Y here, you get support for talking to the ChromeOS EC
           over an LPC bus. This uses a simple byte-level protocol with a
@@ -59,4 +59,9 @@
           To compile this driver as a module, choose M here: the
           module will be called cros_ec_lpc.
 
+config CROS_EC_PROTO
+        bool
+        help
+          ChromeOS EC communication protocol helpers.
+
 endif # CHROMEOS_PLATFORMS
diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
index bd8d860..4a11b01 100644
--- a/drivers/platform/chrome/Makefile
+++ b/drivers/platform/chrome/Makefile
@@ -4,3 +4,4 @@
 cros_ec_devs-objs               := cros_ec_dev.o cros_ec_sysfs.o cros_ec_lightbar.o
 obj-$(CONFIG_CROS_EC_CHARDEV)   += cros_ec_devs.o
 obj-$(CONFIG_CROS_EC_LPC)       += cros_ec_lpc.o
+obj-$(CONFIG_CROS_EC_PROTO)	+= cros_ec_proto.o
diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
new file mode 100644
index 0000000..58e98a2
--- /dev/null
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -0,0 +1,115 @@
+/*
+ * ChromeOS EC communication protocol helper functions
+ *
+ * Copyright (C) 2015 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/mfd/cros_ec.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define EC_COMMAND_RETRIES	50
+
+int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
+		       struct cros_ec_command *msg)
+{
+	uint8_t *out;
+	int csum, i;
+
+	BUG_ON(msg->outsize > EC_PROTO2_MAX_PARAM_SIZE);
+	out = ec_dev->dout;
+	out[0] = EC_CMD_VERSION0 + msg->version;
+	out[1] = msg->command;
+	out[2] = msg->outsize;
+	csum = out[0] + out[1] + out[2];
+	for (i = 0; i < msg->outsize; i++)
+		csum += out[EC_MSG_TX_HEADER_BYTES + i] = msg->data[i];
+	out[EC_MSG_TX_HEADER_BYTES + msg->outsize] = (uint8_t)(csum & 0xff);
+
+	return EC_MSG_TX_PROTO_BYTES + msg->outsize;
+}
+EXPORT_SYMBOL(cros_ec_prepare_tx);
+
+int cros_ec_check_result(struct cros_ec_device *ec_dev,
+			 struct cros_ec_command *msg)
+{
+	switch (msg->result) {
+	case EC_RES_SUCCESS:
+		return 0;
+	case EC_RES_IN_PROGRESS:
+		dev_dbg(ec_dev->dev, "command 0x%02x in progress\n",
+			msg->command);
+		return -EAGAIN;
+	default:
+		dev_dbg(ec_dev->dev, "command 0x%02x returned %d\n",
+			msg->command, msg->result);
+		return 0;
+	}
+}
+EXPORT_SYMBOL(cros_ec_check_result);
+
+int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
+		     struct cros_ec_command *msg)
+{
+	int ret;
+
+	mutex_lock(&ec_dev->lock);
+	ret = ec_dev->cmd_xfer(ec_dev, msg);
+	if (msg->result == EC_RES_IN_PROGRESS) {
+		int i;
+		struct cros_ec_command *status_msg;
+		struct ec_response_get_comms_status *status;
+
+		status_msg = kmalloc(sizeof(*status_msg) + sizeof(*status),
+				     GFP_KERNEL);
+		if (!status_msg) {
+			ret = -ENOMEM;
+			goto exit;
+		}
+
+		status_msg->version = 0;
+		status_msg->command = EC_CMD_GET_COMMS_STATUS;
+		status_msg->insize = sizeof(*status);
+		status_msg->outsize = 0;
+
+		/*
+		 * Query the EC's status until it's no longer busy or
+		 * we encounter an error.
+		 */
+		for (i = 0; i < EC_COMMAND_RETRIES; i++) {
+			usleep_range(10000, 11000);
+
+			ret = ec_dev->cmd_xfer(ec_dev, status_msg);
+			if (ret < 0)
+				break;
+
+			msg->result = status_msg->result;
+			if (status_msg->result != EC_RES_SUCCESS)
+				break;
+
+			status = (struct ec_response_get_comms_status *)
+				 status_msg->data;
+			if (!(status->flags & EC_COMMS_STATUS_PROCESSING))
+				break;
+		}
+
+		kfree(status_msg);
+	}
+exit:
+	mutex_unlock(&ec_dev->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(cros_ec_cmd_xfer);