drivers/iio/accel/Kconfig - kernel/msm-4.9 - Gitiles

 #
 # Accelerometer drivers
 #
 # When adding new entries keep the list in alphabetical order

 menu "Accelerometers"

 config BMA180
 	tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
 	depends on I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y here if you want to build a driver for the Bosch BMA180 or
 	  BMA250 triaxial acceleration sensor.

 	  To compile this driver as a module, choose M here: the
 	  module will be called bma180.

 config BMA220
     tristate "Bosch BMA220 3-Axis Accelerometer Driver"
 	depends on SPI
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
     help
       Say yes here to add support for the Bosch BMA220 triaxial
       acceleration sensor.

       To compile this driver as a module, choose M here: the
       module will be called bma220_spi.

 config BMC150_ACCEL
 	tristate "Bosch BMC150 Accelerometer Driver"
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	select REGMAP
 	select BMC150_ACCEL_I2C if I2C
 	select BMC150_ACCEL_SPI if SPI
 	help
 	  Say yes here to build support for the following Bosch accelerometers:
 	  BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.

 	  This is a combo module with both accelerometer and magnetometer.
 	  This driver is only implementing accelerometer part, which has
 	  its own address and register map.

 config BMC150_ACCEL_I2C
 	tristate
 	select REGMAP_I2C

 config BMC150_ACCEL_SPI
 	tristate
 	select REGMAP_SPI

 config DMARD06
 	tristate "Domintech DMARD06 Digital Accelerometer Driver"
 	depends on OF || COMPILE_TEST
 	depends on I2C
 	help
 	  Say yes here to build support for the Domintech low-g tri-axial
 	  digital accelerometers: DMARD05, DMARD06, DMARD07.

 	  To compile this driver as a module, choose M here: the
 	  module will be called dmard06.

 config DMARD09
 	tristate "Domintech DMARD09 3-axis Accelerometer Driver"
 	depends on I2C
 	help
 	  Say yes here to get support for the Domintech DMARD09 3-axis
 	  accelerometer.

 	  Choosing M will build the driver as a module. If so, the module
 	  will be called dmard09.

 config HID_SENSOR_ACCEL_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Accelerometers 3D"
 	help
 	  Say yes here to build support for the HID SENSOR
 	  accelerometers 3D.

 	  To compile this driver as a module, choose M here: the
 	  module will be called hid-sensor-accel-3d.

 config IIO_ST_ACCEL_3AXIS
 	tristate "STMicroelectronics accelerometers 3-Axis Driver"
 	depends on (I2C || SPI_MASTER) && SYSFS
 	select IIO_ST_SENSORS_CORE
 	select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
 	select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
 	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
 	help
 	  Say yes here to build support for STMicroelectronics accelerometers:
 	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
 	  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL.

 	  This driver can also be built as a module. If so, these modules
 	  will be created:
 	  - st_accel (core functions for the driver [it is mandatory]);
 	  - st_accel_i2c (necessary for the I2C devices [optional*]);
 	  - st_accel_spi (necessary for the SPI devices [optional*]);

 	  (*) one of these is necessary to do something.

 config IIO_ST_ACCEL_I2C_3AXIS
 	tristate
 	depends on IIO_ST_ACCEL_3AXIS
 	depends on IIO_ST_SENSORS_I2C

 config IIO_ST_ACCEL_SPI_3AXIS
 	tristate
 	depends on IIO_ST_ACCEL_3AXIS
 	depends on IIO_ST_SENSORS_SPI

 config KXSD9
 	tristate "Kionix KXSD9 Accelerometer Driver"
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for the Kionix KXSD9 accelerometer.
 	  It can be accessed using an (optional) SPI or I2C interface.

 	  To compile this driver as a module, choose M here: the module
 	  will be called kxsd9.

 config KXSD9_SPI
 	tristate "Kionix KXSD9 SPI transport"
 	depends on KXSD9
 	depends on SPI
 	default KXSD9
 	select REGMAP_SPI
 	help
 	  Say yes here to enable the Kionix KXSD9 accelerometer
 	  SPI transport channel.

 config KXSD9_I2C
 	tristate "Kionix KXSD9 I2C transport"
 	depends on KXSD9
 	depends on I2C
 	default KXSD9
 	select REGMAP_I2C
 	help
 	  Say yes here to enable the Kionix KXSD9 accelerometer
 	  I2C transport channel.

 config KXCJK1013
 	tristate "Kionix 3-Axis Accelerometer Driver"
 	depends on I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y here if you want to build a driver for the Kionix KXCJK-1013
 	  triaxial acceleration sensor. This driver also supports KXCJ9-1008
 	  and KXTJ2-1009.

 	  To compile this driver as a module, choose M here: the module will
 	  be called kxcjk-1013.

 config MC3230
 	tristate "mCube MC3230 Digital Accelerometer Driver"
 	depends on I2C
 	help
 	  Say yes here to build support for the mCube MC3230 low-g tri-axial
 	  digital accelerometer.

 	  To compile this driver as a module, choose M here: the
 	  module will be called mc3230.

 config MMA7455
 	tristate
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER

 config MMA7455_I2C
 	tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver"
 	depends on I2C
 	select MMA7455
 	select REGMAP_I2C
 	help
 	  Say yes here to build support for the Freescale MMA7455L and
 	  MMA7456L 3-axis accelerometer.

 	  To compile this driver as a module, choose M here: the module
 	  will be called mma7455_i2c.

 config MMA7455_SPI
 	tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver"
 	depends on SPI_MASTER
 	select MMA7455
 	select REGMAP_SPI
 	help
 	  Say yes here to build support for the Freescale MMA7455L and
 	  MMA7456L 3-axis accelerometer.

 	  To compile this driver as a module, choose M here: the module
 	  will be called mma7455_spi.

 config MMA7660
 	tristate "Freescale MMA7660FC 3-Axis Accelerometer Driver"
 	depends on I2C
 	help
 	  Say yes here to get support for the Freescale MMA7660FC 3-Axis
 	  accelerometer.

 	  Choosing M will build the driver as a module. If so, the module
 	  will be called mma7660.

 config MMA8452
 	tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver"
 	depends on I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for the following Freescale / NXP 3-axis
 	  accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC,
 	  FXLS8471Q.

 	  To compile this driver as a module, choose M here: the module
 	  will be called mma8452.

 config MMA9551_CORE
 	tristate

 config MMA9551
 	tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver"
 	depends on I2C
 	select MMA9551_CORE

 	help
 	  Say yes here to build support for the Freescale MMA9551L
 	  Intelligent Motion-Sensing Platform Driver.

 	  To compile this driver as a module, choose M here: the module
 	  will be called mma9551.

 config MMA9553
 	tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver"
 	depends on I2C
 	select MMA9551_CORE
 	help
 	  Say yes here to build support for the Freescale MMA9553L
 	  Intelligent Pedometer Platform Driver.

 	  To compile this driver as a module, choose M here: the module
 	  will be called mma9553.

 config MXC4005
 	tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver"
 	depends on I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	select REGMAP_I2C
 	help
 	  Say yes here to build support for the Memsic MXC4005XC 3-axis
 	  accelerometer.

 	  To compile this driver as a module, choose M. The module will be
 	  called mxc4005.

 config MXC6255
 	tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver"
 	depends on I2C
 	select REGMAP_I2C
 	help
 	  Say yes here to build support for the Memsic MXC6255 Orientation
 	  Sensing Accelerometer Driver.

 	  To compile this driver as a module, choose M here: the module will be
 	  called mxc6255.

 config STK8312
 	tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
 	depends on I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to get support for the Sensortek STK8312 3-axis
 	  accelerometer.

 	  Choosing M will build the driver as a module. If so, the module
 	  will be called stk8312.

 config STK8BA50
 	tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
 	depends on I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to get support for the Sensortek STK8BA50 3-axis
 	  accelerometer.

 	  Choosing M will build the driver as a module. If so, the module
 	  will be called stk8ba50.

 endmenu
	#
	# Accelerometer drivers
	#
	# When adding new entries keep the list in alphabetical order

	menu "Accelerometers"

	config BMA180
	tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	Say Y here if you want to build a driver for the Bosch BMA180 or
	BMA250 triaxial acceleration sensor.

	To compile this driver as a module, choose M here: the
	module will be called bma180.

	config BMA220
	tristate "Bosch BMA220 3-Axis Accelerometer Driver"
	depends on SPI
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	Say yes here to add support for the Bosch BMA220 triaxial
	acceleration sensor.

	To compile this driver as a module, choose M here: the
	module will be called bma220_spi.

	config BMC150_ACCEL
	tristate "Bosch BMC150 Accelerometer Driver"
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select REGMAP
	select BMC150_ACCEL_I2C if I2C
	select BMC150_ACCEL_SPI if SPI
	help
	Say yes here to build support for the following Bosch accelerometers:
	BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.

	This is a combo module with both accelerometer and magnetometer.
	This driver is only implementing accelerometer part, which has
	its own address and register map.

	config BMC150_ACCEL_I2C
	tristate
	select REGMAP_I2C

	config BMC150_ACCEL_SPI
	tristate
	select REGMAP_SPI

	config DMARD06
	tristate "Domintech DMARD06 Digital Accelerometer Driver"
	depends on OF \|\| COMPILE_TEST
	depends on I2C
	help
	Say yes here to build support for the Domintech low-g tri-axial
	digital accelerometers: DMARD05, DMARD06, DMARD07.

	To compile this driver as a module, choose M here: the
	module will be called dmard06.

	config DMARD09
	tristate "Domintech DMARD09 3-axis Accelerometer Driver"
	depends on I2C
	help
	Say yes here to get support for the Domintech DMARD09 3-axis
	accelerometer.

	Choosing M will build the driver as a module. If so, the module
	will be called dmard09.

	config HID_SENSOR_ACCEL_3D
	depends on HID_SENSOR_HUB
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select HID_SENSOR_IIO_COMMON
	select HID_SENSOR_IIO_TRIGGER
	tristate "HID Accelerometers 3D"
	help
	Say yes here to build support for the HID SENSOR
	accelerometers 3D.

	To compile this driver as a module, choose M here: the
	module will be called hid-sensor-accel-3d.

	config IIO_ST_ACCEL_3AXIS
	tristate "STMicroelectronics accelerometers 3-Axis Driver"
	depends on (I2C \|\| SPI_MASTER) && SYSFS
	select IIO_ST_SENSORS_CORE
	select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
	select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
	help
	Say yes here to build support for STMicroelectronics accelerometers:
	LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
	LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL.

	This driver can also be built as a module. If so, these modules
	will be created:
	- st_accel (core functions for the driver [it is mandatory]);
	- st_accel_i2c (necessary for the I2C devices [optional*]);
	- st_accel_spi (necessary for the SPI devices [optional*]);

	(*) one of these is necessary to do something.

	config IIO_ST_ACCEL_I2C_3AXIS
	tristate
	depends on IIO_ST_ACCEL_3AXIS
	depends on IIO_ST_SENSORS_I2C

	config IIO_ST_ACCEL_SPI_3AXIS
	tristate
	depends on IIO_ST_ACCEL_3AXIS
	depends on IIO_ST_SENSORS_SPI

	config KXSD9
	tristate "Kionix KXSD9 Accelerometer Driver"
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	Say yes here to build support for the Kionix KXSD9 accelerometer.
	It can be accessed using an (optional) SPI or I2C interface.

	To compile this driver as a module, choose M here: the module
	will be called kxsd9.

	config KXSD9_SPI
	tristate "Kionix KXSD9 SPI transport"
	depends on KXSD9
	depends on SPI
	default KXSD9
	select REGMAP_SPI
	help
	Say yes here to enable the Kionix KXSD9 accelerometer
	SPI transport channel.

	config KXSD9_I2C
	tristate "Kionix KXSD9 I2C transport"
	depends on KXSD9
	depends on I2C
	default KXSD9
	select REGMAP_I2C
	help
	Say yes here to enable the Kionix KXSD9 accelerometer
	I2C transport channel.

	config KXCJK1013
	tristate "Kionix 3-Axis Accelerometer Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	Say Y here if you want to build a driver for the Kionix KXCJK-1013
	triaxial acceleration sensor. This driver also supports KXCJ9-1008
	and KXTJ2-1009.

	To compile this driver as a module, choose M here: the module will
	be called kxcjk-1013.

	config MC3230
	tristate "mCube MC3230 Digital Accelerometer Driver"
	depends on I2C
	help
	Say yes here to build support for the mCube MC3230 low-g tri-axial
	digital accelerometer.

	To compile this driver as a module, choose M here: the
	module will be called mc3230.

	config MMA7455
	tristate
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER

	config MMA7455_I2C
	tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver"
	depends on I2C
	select MMA7455
	select REGMAP_I2C
	help
	Say yes here to build support for the Freescale MMA7455L and
	MMA7456L 3-axis accelerometer.

	To compile this driver as a module, choose M here: the module
	will be called mma7455_i2c.

	config MMA7455_SPI
	tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver"
	depends on SPI_MASTER
	select MMA7455
	select REGMAP_SPI
	help
	Say yes here to build support for the Freescale MMA7455L and
	MMA7456L 3-axis accelerometer.

	To compile this driver as a module, choose M here: the module
	will be called mma7455_spi.

	config MMA7660
	tristate "Freescale MMA7660FC 3-Axis Accelerometer Driver"
	depends on I2C
	help
	Say yes here to get support for the Freescale MMA7660FC 3-Axis
	accelerometer.

	Choosing M will build the driver as a module. If so, the module
	will be called mma7660.

	config MMA8452
	tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	Say yes here to build support for the following Freescale / NXP 3-axis
	accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC,
	FXLS8471Q.

	To compile this driver as a module, choose M here: the module
	will be called mma8452.

	config MMA9551_CORE
	tristate

	config MMA9551
	tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver"
	depends on I2C
	select MMA9551_CORE

	help
	Say yes here to build support for the Freescale MMA9551L
	Intelligent Motion-Sensing Platform Driver.

	To compile this driver as a module, choose M here: the module
	will be called mma9551.

	config MMA9553
	tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver"
	depends on I2C
	select MMA9551_CORE
	help
	Say yes here to build support for the Freescale MMA9553L
	Intelligent Pedometer Platform Driver.

	To compile this driver as a module, choose M here: the module
	will be called mma9553.

	config MXC4005
	tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select REGMAP_I2C
	help
	Say yes here to build support for the Memsic MXC4005XC 3-axis
	accelerometer.

	To compile this driver as a module, choose M. The module will be
	called mxc4005.

	config MXC6255
	tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver"
	depends on I2C
	select REGMAP_I2C
	help
	Say yes here to build support for the Memsic MXC6255 Orientation
	Sensing Accelerometer Driver.

	To compile this driver as a module, choose M here: the module will be
	called mxc6255.

	config STK8312
	tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	Say yes here to get support for the Sensortek STK8312 3-axis
	accelerometer.

	Choosing M will build the driver as a module. If so, the module
	will be called stk8312.

	config STK8BA50
	tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	Say yes here to get support for the Sensortek STK8BA50 3-axis
	accelerometer.

	Choosing M will build the driver as a module. If so, the module
	will be called stk8ba50.

	endmenu