| # |
| # HID driver configuration |
| # |
| menu "HID support" |
| depends on INPUT |
| |
| config HID |
| tristate "HID bus support" |
| depends on INPUT |
| default y |
| ---help--- |
| A human interface device (HID) is a type of computer device that |
| interacts directly with and takes input from humans. The term "HID" |
| most commonly used to refer to the USB-HID specification, but other |
| devices (such as, but not strictly limited to, Bluetooth) are |
| designed using HID specification (this involves certain keyboards, |
| mice, tablets, etc). This option adds the HID bus to the kernel, |
| together with generic HID layer code. The HID devices are added and |
| removed from the HID bus by the transport-layer drivers, such as |
| usbhid (USB_HID) and hidp (BT_HIDP). |
| |
| For docs and specs, see http://www.usb.org/developers/hidpage/ |
| |
| If unsure, say Y. |
| |
| if HID |
| |
| config HID_BATTERY_STRENGTH |
| bool "Battery level reporting for HID devices" |
| depends on HID |
| select POWER_SUPPLY |
| default n |
| ---help--- |
| This option adds support of reporting battery strength (for HID devices |
| that support this feature) through power_supply class so that userspace |
| tools, such as upower, can display it. |
| |
| config HIDRAW |
| bool "/dev/hidraw raw HID device support" |
| depends on HID |
| ---help--- |
| Say Y here if you want to support HID devices (from the USB |
| specification standpoint) that aren't strictly user interface |
| devices, like monitor controls and Uninterruptable Power Supplies. |
| |
| This module supports these devices separately using a separate |
| event interface on /dev/hidraw. |
| |
| There is also a /dev/hiddev configuration option in the USB HID |
| configuration menu. In comparison to hiddev, this device does not process |
| the hid events at all (no parsing, no lookups). This lets applications |
| to work on raw hid events when they want to, and avoid using transport-specific |
| userspace libhid/libusb libraries. |
| |
| If unsure, say Y. |
| |
| config UHID |
| tristate "User-space I/O driver support for HID subsystem" |
| depends on HID |
| default n |
| ---help--- |
| Say Y here if you want to provide HID I/O Drivers from user-space. |
| This allows to write I/O drivers in user-space and feed the data from |
| the device into the kernel. The kernel parses the HID reports, loads the |
| corresponding HID Device Driver or provides input devices on top of your |
| user-space device. |
| |
| This driver cannot be used to parse HID-reports in user-space and write |
| special HID-drivers. You should use hidraw for that. |
| Instead, this driver allows to write the transport-layer driver in |
| user-space like USB-HID and Bluetooth-HID do in kernel-space. |
| |
| If unsure, say N. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called uhid. |
| |
| config HID_GENERIC |
| tristate "Generic HID driver" |
| depends on HID |
| default HID |
| ---help--- |
| Support for generic devices on the HID bus. This includes most |
| keyboards and mice, joysticks, tablets and digitizers. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called hid-generic. |
| |
| If unsure, say Y. |
| |
| menu "Special HID drivers" |
| depends on HID |
| |
| config HID_A4TECH |
| tristate "A4 tech mice" |
| depends on HID |
| default !EXPERT |
| ---help--- |
| Support for A4 tech X5 and WOP-35 / Trust 450L mice. |
| |
| config HID_ACRUX |
| tristate "ACRUX game controller support" |
| depends on HID |
| ---help--- |
| Say Y here if you want to enable support for ACRUX game controllers. |
| |
| config HID_ACRUX_FF |
| bool "ACRUX force feedback support" |
| depends on HID_ACRUX |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you want to enable force feedback support for ACRUX |
| game controllers. |
| |
| config HID_APPLE |
| tristate "Apple {i,Power,Mac}Books" |
| depends on HID |
| default !EXPERT |
| ---help--- |
| Support for some Apple devices which less or more break |
| HID specification. |
| |
| Say Y here if you want support for keyboards of Apple iBooks, PowerBooks, |
| MacBooks, MacBook Pros and Apple Aluminum. |
| |
| config HID_APPLEIR |
| tristate "Apple infrared receiver" |
| depends on (USB_HID) |
| ---help--- |
| Support for Apple infrared remote control. All the Apple computers from |
| 2005 onwards include such a port, except the unibody Macbook (2009), |
| and Mac Pros. This receiver is also used in the Apple TV set-top box |
| prior to the 2010 model. |
| |
| Say Y here if you want support for Apple infrared remote control. |
| |
| config HID_AUREAL |
| tristate "Aureal" |
| depends on HID |
| ---help--- |
| Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes. |
| |
| config HID_BELKIN |
| tristate "Belkin Flip KVM and Wireless keyboard" |
| depends on HID |
| default !EXPERT |
| ---help--- |
| Support for Belkin Flip KVM and Wireless keyboard. |
| |
| config HID_BETOP_FF |
| tristate "Betop Production Inc. force feedback support" |
| depends on USB_HID |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you want to enable force feedback support for devices by |
| BETOP Production Ltd. |
| Currently the following devices are known to be supported: |
| - BETOP 2185 PC & BFM MODE |
| |
| config HID_CHERRY |
| tristate "Cherry Cymotion keyboard" |
| depends on HID |
| default !EXPERT |
| ---help--- |
| Support for Cherry Cymotion keyboard. |
| |
| config HID_CHICONY |
| tristate "Chicony Tactical pad" |
| depends on HID |
| default !EXPERT |
| ---help--- |
| Support for Chicony Tactical pad. |
| |
| config HID_PRODIKEYS |
| tristate "Prodikeys PC-MIDI Keyboard support" |
| depends on HID && SND |
| select SND_RAWMIDI |
| ---help--- |
| Support for Prodikeys PC-MIDI Keyboard device support. |
| Say Y here to enable support for this device. |
| - Prodikeys PC-MIDI keyboard. |
| The Prodikeys PC-MIDI acts as a USB Audio device, with one MIDI |
| input and one MIDI output. These MIDI jacks appear as |
| a sound "card" in the ALSA sound system. |
| Note: if you say N here, this device will still function as a basic |
| multimedia keyboard, but will lack support for the musical keyboard |
| and some additional multimedia keys. |
| |
| config HID_CP2112 |
| tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support" |
| depends on USB_HID && I2C && GPIOLIB |
| ---help--- |
| Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge. |
| This is a HID device driver which registers as an i2c adapter |
| and gpiochip to expose these functions of the CP2112. The |
| customizable USB descriptor fields are exposed as sysfs attributes. |
| |
| config HID_CYPRESS |
| tristate "Cypress mouse and barcode readers" |
| depends on HID |
| default !EXPERT |
| ---help--- |
| Support for cypress mouse and barcode readers. |
| |
| config HID_DRAGONRISE |
| tristate "DragonRise Inc. game controller" |
| depends on HID |
| ---help--- |
| Say Y here if you have DragonRise Inc. game controllers. |
| These might be branded as: |
| - Tesun USB-703 |
| - Media-tech MT1504 "Rogue" |
| - DVTech JS19 "Gear" |
| - Defender Game Master |
| |
| config DRAGONRISE_FF |
| bool "DragonRise Inc. force feedback" |
| depends on HID_DRAGONRISE |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you want to enable force feedback support for DragonRise Inc. |
| game controllers. |
| |
| config HID_EMS_FF |
| tristate "EMS Production Inc. force feedback support" |
| depends on HID |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you want to enable force feedback support for devices by |
| EMS Production Ltd. |
| Currently the following devices are known to be supported: |
| - Trio Linker Plus II |
| |
| config HID_ELECOM |
| tristate "ELECOM BM084 bluetooth mouse" |
| depends on HID |
| ---help--- |
| Support for the ELECOM BM084 (bluetooth mouse). |
| |
| config HID_ELO |
| tristate "ELO USB 4000/4500 touchscreen" |
| depends on USB_HID |
| ---help--- |
| Support for the ELO USB 4000/4500 touchscreens. Note that this is for |
| different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO. |
| |
| config HID_EZKEY |
| tristate "Ezkey BTC 8193 keyboard" |
| depends on HID |
| default !EXPERT |
| ---help--- |
| Support for Ezkey BTC 8193 keyboard. |
| |
| config HID_GEMBIRD |
| tristate "Gembird Joypad" |
| depends on HID |
| ---help--- |
| Support for Gembird JPD-DualForce 2. |
| |
| config HID_HOLTEK |
| tristate "Holtek HID devices" |
| depends on USB_HID |
| ---help--- |
| Support for Holtek based devices: |
| - Holtek On Line Grip based game controller |
| - Trust GXT 18 Gaming Keyboard |
| - Sharkoon Drakonia / Perixx MX-2000 gaming mice |
| - Tracer Sniper TRM-503 / NOVA Gaming Slider X200 / |
| Zalman ZM-GM1 |
| - SHARKOON DarkGlider Gaming mouse |
| - LEETGION Hellion Gaming Mouse |
| |
| config HOLTEK_FF |
| bool "Holtek On Line Grip force feedback support" |
| depends on HID_HOLTEK |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a Holtek On Line Grip based game controller |
| and want to have force feedback support for it. |
| |
| config HID_GT683R |
| tristate "MSI GT68xR LED support" |
| depends on LEDS_CLASS && USB_HID |
| ---help--- |
| Say Y here if you want to enable support for the three MSI GT68xR LEDs |
| |
| This driver support following modes: |
| - Normal: LEDs are fully on when enabled |
| - Audio: LEDs brightness depends on sound level |
| - Breathing: LEDs brightness varies at human breathing rate |
| |
| Currently the following devices are know to be supported: |
| - MSI GT683R |
| |
| config HID_KEYTOUCH |
| tristate "Keytouch HID devices" |
| depends on HID |
| ---help--- |
| Support for Keytouch HID devices not fully compliant with |
| the specification. Currently supported: |
| - Keytouch IEC 60945 |
| |
| config HID_KYE |
| tristate "KYE/Genius devices" |
| depends on HID |
| ---help--- |
| Support for KYE/Genius devices not fully compliant with HID standard: |
| - Ergo Mouse |
| - EasyPen i405X tablet |
| - MousePen i608X tablet |
| - EasyPen M610X tablet |
| |
| config HID_UCLOGIC |
| tristate "UC-Logic" |
| depends on USB_HID |
| ---help--- |
| Support for UC-Logic and Huion tablets. |
| |
| config HID_WALTOP |
| tristate "Waltop" |
| depends on HID |
| ---help--- |
| Support for Waltop tablets. |
| |
| config HID_GYRATION |
| tristate "Gyration remote control" |
| depends on HID |
| ---help--- |
| Support for Gyration remote control. |
| |
| config HID_ICADE |
| tristate "ION iCade arcade controller" |
| depends on HID |
| ---help--- |
| Support for the ION iCade arcade controller to work as a joystick. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hid-icade. |
| |
| config HID_TWINHAN |
| tristate "Twinhan IR remote control" |
| depends on HID |
| ---help--- |
| Support for Twinhan IR remote control. |
| |
| config HID_KENSINGTON |
| tristate "Kensington Slimblade Trackball" |
| depends on HID |
| default !EXPERT |
| ---help--- |
| Support for Kensington Slimblade Trackball. |
| |
| config HID_LCPOWER |
| tristate "LC-Power" |
| depends on HID |
| ---help--- |
| Support for LC-Power RC1000MCE RF remote control. |
| |
| config HID_LENOVO |
| tristate "Lenovo / Thinkpad devices" |
| depends on HID |
| select NEW_LEDS |
| select LEDS_CLASS |
| ---help--- |
| Support for Lenovo devices that are not fully compliant with HID standard. |
| |
| Say Y if you want support for the non-compliant features of the Lenovo |
| Thinkpad standalone keyboards, e.g: |
| - ThinkPad USB Keyboard with TrackPoint (supports extra LEDs and trackpoint |
| configuration) |
| - ThinkPad Compact Bluetooth Keyboard with TrackPoint (supports Fn keys) |
| - ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys) |
| |
| config HID_LOGITECH |
| tristate "Logitech devices" |
| depends on HID |
| default !EXPERT |
| ---help--- |
| Support for Logitech devices that are not fully compliant with HID standard. |
| |
| config HID_LOGITECH_DJ |
| tristate "Logitech Unifying receivers full support" |
| depends on HIDRAW |
| depends on HID_LOGITECH |
| select HID_LOGITECH_HIDPP |
| ---help--- |
| Say Y if you want support for Logitech Unifying receivers and devices. |
| Unifying receivers are capable of pairing up to 6 Logitech compliant |
| devices to the same receiver. Without this driver it will be handled by |
| generic USB_HID driver and all incoming events will be multiplexed |
| into a single mouse and a single keyboard device. |
| |
| config HID_LOGITECH_HIDPP |
| tristate "Logitech HID++ devices support" |
| depends on HID_LOGITECH |
| ---help--- |
| Support for Logitech devices relyingon the HID++ Logitech specification |
| |
| Say Y if you want support for Logitech devices relying on the HID++ |
| specification. Such devices are the various Logitech Touchpads (T650, |
| T651, TK820), some mice (Zone Touch mouse), or even keyboards (Solar |
| Keyboard). |
| |
| config LOGITECH_FF |
| bool "Logitech force feedback support" |
| depends on HID_LOGITECH |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have one of these devices: |
| - Logitech WingMan Cordless RumblePad |
| - Logitech WingMan Cordless RumblePad 2 |
| - Logitech WingMan Force 3D |
| - Logitech Formula Force EX |
| - Logitech WingMan Formula Force GP |
| |
| and if you want to enable force feedback for them. |
| Note: if you say N here, this device will still be supported, but without |
| force feedback. |
| |
| config LOGIRUMBLEPAD2_FF |
| bool "Logitech force feedback support (variant 2)" |
| depends on HID_LOGITECH |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you want to enable force feedback support for: |
| - Logitech RumblePad |
| - Logitech Rumblepad 2 |
| - Logitech Formula Vibration Feedback Wheel |
| |
| config LOGIG940_FF |
| bool "Logitech Flight System G940 force feedback support" |
| depends on HID_LOGITECH |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you want to enable force feedback support for Logitech |
| Flight System G940 devices. |
| |
| config LOGIWHEELS_FF |
| bool "Logitech wheels configuration and force feedback support" |
| depends on HID_LOGITECH |
| select INPUT_FF_MEMLESS |
| default LOGITECH_FF |
| help |
| Say Y here if you want to enable force feedback and range setting |
| support for following Logitech wheels: |
| - Logitech Driving Force |
| - Logitech Driving Force Pro |
| - Logitech Driving Force GT |
| - Logitech G25 |
| - Logitech G27 |
| - Logitech MOMO/MOMO 2 |
| - Logitech Formula Force EX |
| |
| config HID_MAGICMOUSE |
| tristate "Apple Magic Mouse/Trackpad multi-touch support" |
| depends on HID |
| ---help--- |
| Support for the Apple Magic Mouse/Trackpad multi-touch. |
| |
| Say Y here if you want support for the multi-touch features of the |
| Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad. |
| |
| config HID_MICROSOFT |
| tristate "Microsoft non-fully HID-compliant devices" |
| depends on HID |
| default !EXPERT |
| ---help--- |
| Support for Microsoft devices that are not fully compliant with HID standard. |
| |
| config HID_MONTEREY |
| tristate "Monterey Genius KB29E keyboard" |
| depends on HID |
| default !EXPERT |
| ---help--- |
| Support for Monterey Genius KB29E. |
| |
| config HID_MULTITOUCH |
| tristate "HID Multitouch panels" |
| depends on HID |
| ---help--- |
| Generic support for HID multitouch panels. |
| |
| Say Y here if you have one of the following devices: |
| - 3M PCT touch screens |
| - ActionStar dual touch panels |
| - Atmel panels |
| - Cando dual touch panels |
| - Chunghwa panels |
| - CVTouch panels |
| - Cypress TrueTouch panels |
| - Elan Microelectronics touch panels |
| - Elo TouchSystems IntelliTouch Plus panels |
| - GeneralTouch 'Sensing Win7-TwoFinger' panels |
| - GoodTouch panels |
| - Hanvon dual touch panels |
| - Ilitek dual touch panels |
| - IrTouch Infrared USB panels |
| - LG Display panels (Dell ST2220Tc) |
| - Lumio CrystalTouch panels |
| - MosArt dual-touch panels |
| - Panasonic multitouch panels |
| - PenMount dual touch panels |
| - Perixx Peripad 701 touchpad |
| - PixArt optical touch screen |
| - Pixcir dual touch panels |
| - Quanta panels |
| - eGalax dual-touch panels, including the Joojoo and Wetab tablets |
| - SiS multitouch panels |
| - Stantum multitouch panels |
| - Touch International Panels |
| - Unitec Panels |
| - Wistron optical touch panels |
| - XAT optical touch panels |
| - Xiroku optical touch panels |
| - Zytronic touch panels |
| |
| If unsure, say N. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hid-multitouch. |
| |
| config HID_NTRIG |
| tristate "N-Trig touch screen" |
| depends on USB_HID |
| ---help--- |
| Support for N-Trig touch screen. |
| |
| config HID_ORTEK |
| tristate "Ortek PKB-1700/WKB-2000/Skycable wireless keyboard and mouse trackpad" |
| depends on HID |
| ---help--- |
| There are certain devices which have LogicalMaximum wrong in the keyboard |
| usage page of their report descriptor. The most prevailing ones so far |
| are manufactured by Ortek, thus the name of the driver. Currently |
| supported devices by this driver are |
| |
| - Ortek PKB-1700 |
| - Ortek WKB-2000 |
| - Skycable wireless presenter |
| |
| config HID_PANTHERLORD |
| tristate "Pantherlord/GreenAsia game controller" |
| depends on HID |
| ---help--- |
| Say Y here if you have a PantherLord/GreenAsia based game controller |
| or adapter. |
| |
| config PANTHERLORD_FF |
| bool "Pantherlord force feedback support" |
| depends on HID_PANTHERLORD |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a PantherLord/GreenAsia based game controller |
| or adapter and want to enable force feedback support for it. |
| |
| config HID_PENMOUNT |
| tristate "Penmount touch device" |
| depends on USB_HID |
| ---help--- |
| This selects a driver for the PenMount 6000 touch controller. |
| |
| The driver works around a problem in the report descript allowing |
| the userspace to touch events instead of mouse events. |
| |
| Say Y here if you have a Penmount based touch controller. |
| |
| config HID_PETALYNX |
| tristate "Petalynx Maxter remote control" |
| depends on HID |
| ---help--- |
| Support for Petalynx Maxter remote control. |
| |
| config HID_PICOLCD |
| tristate "PicoLCD (graphic version)" |
| depends on HID |
| ---help--- |
| This provides support for Minibox PicoLCD devices, currently |
| only the graphical ones are supported. |
| |
| This includes support for the following device features: |
| - Keypad |
| - Switching between Firmware and Flash mode |
| - EEProm / Flash access (via debugfs) |
| Features selectively enabled: |
| - Framebuffer for monochrome 256x64 display |
| - Backlight control |
| - Contrast control |
| - General purpose outputs |
| Features that are not (yet) supported: |
| - IR |
| |
| config HID_PICOLCD_FB |
| bool "Framebuffer support" if EXPERT |
| default !EXPERT |
| depends on HID_PICOLCD |
| depends on HID_PICOLCD=FB || FB=y |
| select FB_DEFERRED_IO |
| select FB_SYS_FILLRECT |
| select FB_SYS_COPYAREA |
| select FB_SYS_IMAGEBLIT |
| select FB_SYS_FOPS |
| ---help--- |
| Provide access to PicoLCD's 256x64 monochrome display via a |
| framebuffer device. |
| |
| config HID_PICOLCD_BACKLIGHT |
| bool "Backlight control" if EXPERT |
| default !EXPERT |
| depends on HID_PICOLCD |
| depends on HID_PICOLCD=BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=y |
| ---help--- |
| Provide access to PicoLCD's backlight control via backlight |
| class. |
| |
| config HID_PICOLCD_LCD |
| bool "Contrast control" if EXPERT |
| default !EXPERT |
| depends on HID_PICOLCD |
| depends on HID_PICOLCD=LCD_CLASS_DEVICE || LCD_CLASS_DEVICE=y |
| ---help--- |
| Provide access to PicoLCD's LCD contrast via lcd class. |
| |
| config HID_PICOLCD_LEDS |
| bool "GPO via leds class" if EXPERT |
| default !EXPERT |
| depends on HID_PICOLCD |
| depends on HID_PICOLCD=LEDS_CLASS || LEDS_CLASS=y |
| ---help--- |
| Provide access to PicoLCD's GPO pins via leds class. |
| |
| config HID_PICOLCD_CIR |
| bool "CIR via RC class" if EXPERT |
| default !EXPERT |
| depends on HID_PICOLCD |
| depends on HID_PICOLCD=RC_CORE || RC_CORE=y |
| ---help--- |
| Provide access to PicoLCD's CIR interface via remote control (LIRC). |
| |
| config HID_PLANTRONICS |
| tristate "Plantronics USB HID Driver" |
| depends on HID |
| ---help--- |
| Provides HID support for Plantronics USB audio devices. |
| Correctly maps vendor unique volume up/down HID usages to |
| KEY_VOLUMEUP and KEY_VOLUMEDOWN events and prevents core mapping |
| of other vendor unique HID usages to random mouse events. |
| |
| Say M here if you may ever plug in a Plantronics USB audio device. |
| |
| config HID_PRIMAX |
| tristate "Primax non-fully HID-compliant devices" |
| depends on HID |
| ---help--- |
| Support for Primax devices that are not fully compliant with the |
| HID standard. |
| |
| config HID_ROCCAT |
| tristate "Roccat device support" |
| depends on USB_HID |
| ---help--- |
| Support for Roccat devices. |
| Say Y here if you have a Roccat mouse or keyboard and want |
| support for its special functionalities. |
| |
| config HID_SAITEK |
| tristate "Saitek (Mad Catz) non-fully HID-compliant devices" |
| depends on HID |
| ---help--- |
| Support for Saitek devices that are not fully compliant with the |
| HID standard. |
| |
| Supported devices: |
| - PS1000 Dual Analog Pad |
| - R.A.T.9 Gaming Mouse |
| - R.A.T.7 Gaming Mouse |
| - M.M.O.7 Gaming Mouse |
| |
| config HID_SAMSUNG |
| tristate "Samsung InfraRed remote control or keyboards" |
| depends on HID |
| ---help--- |
| Support for Samsung InfraRed remote control or keyboards. |
| |
| config HID_SONY |
| tristate "Sony PS2/3/4 accessories" |
| depends on USB_HID |
| depends on NEW_LEDS |
| depends on LEDS_CLASS |
| select POWER_SUPPLY |
| ---help--- |
| Support for |
| |
| * Sony PS3 6-axis controllers |
| * Sony PS4 DualShock 4 controllers |
| * Buzz controllers |
| * Sony PS3 Blue-ray Disk Remote Control (Bluetooth) |
| * Logitech Harmony adapter for Sony Playstation 3 (Bluetooth) |
| |
| config SONY_FF |
| bool "Sony PS2/3/4 accessories force feedback support" |
| depends on HID_SONY |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a Sony PS2/3/4 accessory and want to enable |
| force feedback support for it. |
| |
| config HID_SPEEDLINK |
| tristate "Speedlink VAD Cezanne mouse support" |
| depends on HID |
| ---help--- |
| Support for Speedlink Vicious and Divine Cezanne mouse. |
| |
| config HID_STEELSERIES |
| tristate "Steelseries SRW-S1 steering wheel support" |
| depends on HID |
| ---help--- |
| Support for Steelseries SRW-S1 steering wheel |
| |
| config HID_SUNPLUS |
| tristate "Sunplus wireless desktop" |
| depends on HID |
| ---help--- |
| Support for Sunplus wireless desktop. |
| |
| config HID_RMI |
| tristate "Synaptics RMI4 device support" |
| depends on HID |
| ---help--- |
| Support for Synaptics RMI4 touchpads. |
| Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid |
| and want support for its special functionalities. |
| |
| config HID_GREENASIA |
| tristate "GreenAsia (Product ID 0x12) game controller support" |
| depends on HID |
| ---help--- |
| Say Y here if you have a GreenAsia (Product ID 0x12) based game |
| controller or adapter. |
| |
| config GREENASIA_FF |
| bool "GreenAsia (Product ID 0x12) force feedback support" |
| depends on HID_GREENASIA |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a GreenAsia (Product ID 0x12) based game controller |
| (like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter |
| and want to enable force feedback support for it. |
| |
| config HID_HYPERV_MOUSE |
| tristate "Microsoft Hyper-V mouse driver" |
| depends on HYPERV |
| ---help--- |
| Select this option to enable the Hyper-V mouse driver. |
| |
| config HID_SMARTJOYPLUS |
| tristate "SmartJoy PLUS PS2/USB adapter support" |
| depends on HID |
| ---help--- |
| Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box, |
| Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro. |
| |
| Note that DDR (Dance Dance Revolution) mode is not supported, nor |
| is pressure sensitive buttons on the pro models. |
| |
| config SMARTJOYPLUS_FF |
| bool "SmartJoy PLUS PS2/USB adapter force feedback support" |
| depends on HID_SMARTJOYPLUS |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to |
| enable force feedback support for it. |
| |
| config HID_TIVO |
| tristate "TiVo Slide Bluetooth remote control support" |
| depends on HID |
| ---help--- |
| Say Y if you have a TiVo Slide Bluetooth remote control. |
| |
| config HID_TOPSEED |
| tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support" |
| depends on HID |
| ---help--- |
| Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic |
| CLLRCMCE remote control. |
| |
| config HID_THINGM |
| tristate "ThingM blink(1) USB RGB LED" |
| depends on HID |
| depends on LEDS_CLASS |
| ---help--- |
| Support for the ThingM blink(1) USB RGB LED. This driver registers a |
| Linux LED class instance, plus additional sysfs attributes to control |
| RGB colors, fade time and playing. The device is exposed through hidraw |
| to access other functions. |
| |
| config HID_THRUSTMASTER |
| tristate "ThrustMaster devices support" |
| depends on HID |
| ---help--- |
| Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or |
| a THRUSTMASTER Ferrari GT Rumble Wheel. |
| |
| config THRUSTMASTER_FF |
| bool "ThrustMaster devices force feedback support" |
| depends on HID_THRUSTMASTER |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or 3, |
| a THRUSTMASTER Dual Trigger 3-in-1 or a THRUSTMASTER Ferrari GT |
| Rumble Force or Force Feedback Wheel. |
| |
| config HID_WACOM |
| tristate "Wacom Intuos/Graphire tablet support (USB)" |
| depends on HID |
| select POWER_SUPPLY |
| select NEW_LEDS |
| select LEDS_CLASS |
| help |
| Say Y here if you want to use the USB or BT version of the Wacom Intuos |
| or Graphire tablet. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called wacom. |
| |
| config HID_WIIMOTE |
| tristate "Nintendo Wii / Wii U peripherals" |
| depends on HID |
| depends on LEDS_CLASS |
| select POWER_SUPPLY |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported |
| devices are the Wii Remote and its extension devices, but also devices |
| based on the Wii Remote like the Wii U Pro Controller or the |
| Wii Balance Board. |
| |
| Support for all official Nintendo extensions is available, however, 3rd |
| party extensions might not be supported. Please report these devices to: |
| http://github.com/dvdhrm/xwiimote/issues |
| |
| Other Nintendo Wii U peripherals that are IEEE 802.11 based (including |
| the Wii U Gamepad) might be supported in the future. But currently |
| support is limited to Bluetooth based devices. |
| |
| If unsure, say N. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hid-wiimote. |
| |
| config HID_XINMO |
| tristate "Xin-Mo non-fully compliant devices" |
| depends on HID |
| ---help--- |
| Support for Xin-Mo devices that are not fully compliant with the HID |
| standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here |
| if you have a Xin-Mo Dual Arcade controller. |
| |
| config HID_ZEROPLUS |
| tristate "Zeroplus based game controller support" |
| depends on HID |
| ---help--- |
| Say Y here if you have a Zeroplus based game controller. |
| |
| config ZEROPLUS_FF |
| bool "Zeroplus based game controller force feedback support" |
| depends on HID_ZEROPLUS |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a Zeroplus based game controller and want |
| to have force feedback support for it. |
| |
| config HID_ZYDACRON |
| tristate "Zydacron remote control support" |
| depends on HID |
| ---help--- |
| Support for Zydacron remote control. |
| |
| config HID_SENSOR_HUB |
| tristate "HID Sensors framework support" |
| depends on HID && HAS_IOMEM |
| select MFD_CORE |
| default n |
| ---help--- |
| Support for HID Sensor framework. This creates a MFD instance |
| for a sensor hub and identifies all the sensors connected to it. |
| Each sensor is registered as a MFD cell, so that sensor specific |
| processing can be done in a separate driver. Each sensor |
| drivers can use the service provided by this driver to register |
| for events and handle data streams. Each sensor driver can format |
| data and present to user mode using input or IIO interface. |
| |
| config HID_SENSOR_CUSTOM_SENSOR |
| tristate "HID Sensors hub custom sensor support" |
| depends on HID_SENSOR_HUB |
| default n |
| ---help--- |
| HID Sensor hub specification allows definition of some custom and |
| generic sensors. Unlike other HID sensors, they can't be exported |
| via Linux IIO because of custom fields. This is up to the manufacturer |
| to decide how to interpret these special sensor ids and process in |
| the user space. Currently some manufacturers are using these ids for |
| sensor calibration and debugging other sensors. Manufacturers |
| should't use these special custom sensor ids to export any of the |
| standard sensors. |
| Select this config option for custom/generic sensor support. |
| |
| endmenu |
| |
| endif # HID |
| |
| source "drivers/hid/usbhid/Kconfig" |
| |
| source "drivers/hid/i2c-hid/Kconfig" |
| |
| endmenu |