| /* |
| * Intel Quark MFD PCI driver for I2C & GPIO |
| * |
| * Copyright(c) 2014 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * Intel Quark PCI device for I2C and GPIO controller sharing the same |
| * PCI function. This PCI driver will split the 2 devices into their |
| * respective drivers. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/mfd/core.h> |
| #include <linux/clkdev.h> |
| #include <linux/clk-provider.h> |
| #include <linux/dmi.h> |
| #include <linux/platform_data/gpio-dwapb.h> |
| #include <linux/platform_data/i2c-designware.h> |
| |
| /* PCI BAR for register base address */ |
| #define MFD_I2C_BAR 0 |
| #define MFD_GPIO_BAR 1 |
| |
| /* ACPI _ADR value to match the child node */ |
| #define MFD_ACPI_MATCH_GPIO 0ULL |
| #define MFD_ACPI_MATCH_I2C 1ULL |
| |
| /* The base GPIO number under GPIOLIB framework */ |
| #define INTEL_QUARK_MFD_GPIO_BASE 8 |
| |
| /* The default number of South-Cluster GPIO on Quark. */ |
| #define INTEL_QUARK_MFD_NGPIO 8 |
| |
| /* The DesignWare GPIO ports on Quark. */ |
| #define INTEL_QUARK_GPIO_NPORTS 1 |
| |
| #define INTEL_QUARK_IORES_MEM 0 |
| #define INTEL_QUARK_IORES_IRQ 1 |
| |
| #define INTEL_QUARK_I2C_CONTROLLER_CLK "i2c_designware.0" |
| |
| /* The Quark I2C controller source clock */ |
| #define INTEL_QUARK_I2C_CLK_HZ 33000000 |
| |
| struct intel_quark_mfd { |
| struct pci_dev *pdev; |
| struct clk *i2c_clk; |
| struct clk_lookup *i2c_clk_lookup; |
| }; |
| |
| struct i2c_mode_info { |
| const char *name; |
| unsigned int i2c_scl_freq; |
| }; |
| |
| static const struct i2c_mode_info platform_i2c_mode_info[] = { |
| { |
| .name = "Galileo", |
| .i2c_scl_freq = 100000, |
| }, |
| { |
| .name = "GalileoGen2", |
| .i2c_scl_freq = 400000, |
| }, |
| {} |
| }; |
| |
| static struct resource intel_quark_i2c_res[] = { |
| [INTEL_QUARK_IORES_MEM] = { |
| .flags = IORESOURCE_MEM, |
| }, |
| [INTEL_QUARK_IORES_IRQ] = { |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct mfd_cell_acpi_match intel_quark_acpi_match_i2c = { |
| .adr = MFD_ACPI_MATCH_I2C, |
| }; |
| |
| static struct resource intel_quark_gpio_res[] = { |
| [INTEL_QUARK_IORES_MEM] = { |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct mfd_cell_acpi_match intel_quark_acpi_match_gpio = { |
| .adr = MFD_ACPI_MATCH_GPIO, |
| }; |
| |
| static struct mfd_cell intel_quark_mfd_cells[] = { |
| { |
| .id = MFD_GPIO_BAR, |
| .name = "gpio-dwapb", |
| .acpi_match = &intel_quark_acpi_match_gpio, |
| .num_resources = ARRAY_SIZE(intel_quark_gpio_res), |
| .resources = intel_quark_gpio_res, |
| .ignore_resource_conflicts = true, |
| }, |
| { |
| .id = MFD_I2C_BAR, |
| .name = "i2c_designware", |
| .acpi_match = &intel_quark_acpi_match_i2c, |
| .num_resources = ARRAY_SIZE(intel_quark_i2c_res), |
| .resources = intel_quark_i2c_res, |
| .ignore_resource_conflicts = true, |
| }, |
| }; |
| |
| static const struct pci_device_id intel_quark_mfd_ids[] = { |
| { PCI_VDEVICE(INTEL, 0x0934), }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(pci, intel_quark_mfd_ids); |
| |
| static int intel_quark_register_i2c_clk(struct intel_quark_mfd *quark_mfd) |
| { |
| struct pci_dev *pdev = quark_mfd->pdev; |
| struct clk *i2c_clk; |
| |
| i2c_clk = clk_register_fixed_rate(&pdev->dev, |
| INTEL_QUARK_I2C_CONTROLLER_CLK, NULL, |
| CLK_IS_ROOT, INTEL_QUARK_I2C_CLK_HZ); |
| if (IS_ERR(i2c_clk)) |
| return PTR_ERR(i2c_clk); |
| |
| quark_mfd->i2c_clk = i2c_clk; |
| quark_mfd->i2c_clk_lookup = clkdev_create(i2c_clk, NULL, |
| INTEL_QUARK_I2C_CONTROLLER_CLK); |
| |
| if (!quark_mfd->i2c_clk_lookup) { |
| dev_err(&pdev->dev, "Fixed clk register failed\n"); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static void intel_quark_unregister_i2c_clk(struct pci_dev *pdev) |
| { |
| struct intel_quark_mfd *quark_mfd = dev_get_drvdata(&pdev->dev); |
| |
| if (!quark_mfd->i2c_clk || !quark_mfd->i2c_clk_lookup) |
| return; |
| |
| clkdev_drop(quark_mfd->i2c_clk_lookup); |
| clk_unregister(quark_mfd->i2c_clk); |
| } |
| |
| static int intel_quark_i2c_setup(struct pci_dev *pdev, struct mfd_cell *cell) |
| { |
| const char *board_name = dmi_get_system_info(DMI_BOARD_NAME); |
| const struct i2c_mode_info *info; |
| struct dw_i2c_platform_data *pdata; |
| struct resource *res = (struct resource *)cell->resources; |
| struct device *dev = &pdev->dev; |
| |
| res[INTEL_QUARK_IORES_MEM].start = |
| pci_resource_start(pdev, MFD_I2C_BAR); |
| res[INTEL_QUARK_IORES_MEM].end = |
| pci_resource_end(pdev, MFD_I2C_BAR); |
| |
| res[INTEL_QUARK_IORES_IRQ].start = pdev->irq; |
| res[INTEL_QUARK_IORES_IRQ].end = pdev->irq; |
| |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return -ENOMEM; |
| |
| /* Normal mode by default */ |
| pdata->i2c_scl_freq = 100000; |
| |
| if (board_name) { |
| for (info = platform_i2c_mode_info; info->name; info++) { |
| if (!strcmp(board_name, info->name)) { |
| pdata->i2c_scl_freq = info->i2c_scl_freq; |
| break; |
| } |
| } |
| } |
| |
| cell->platform_data = pdata; |
| cell->pdata_size = sizeof(*pdata); |
| |
| return 0; |
| } |
| |
| static int intel_quark_gpio_setup(struct pci_dev *pdev, struct mfd_cell *cell) |
| { |
| struct dwapb_platform_data *pdata; |
| struct resource *res = (struct resource *)cell->resources; |
| struct device *dev = &pdev->dev; |
| |
| res[INTEL_QUARK_IORES_MEM].start = |
| pci_resource_start(pdev, MFD_GPIO_BAR); |
| res[INTEL_QUARK_IORES_MEM].end = |
| pci_resource_end(pdev, MFD_GPIO_BAR); |
| |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return -ENOMEM; |
| |
| /* For intel quark x1000, it has only one port: portA */ |
| pdata->nports = INTEL_QUARK_GPIO_NPORTS; |
| pdata->properties = devm_kcalloc(dev, pdata->nports, |
| sizeof(*pdata->properties), |
| GFP_KERNEL); |
| if (!pdata->properties) |
| return -ENOMEM; |
| |
| /* Set the properties for portA */ |
| pdata->properties->node = NULL; |
| pdata->properties->name = "intel-quark-x1000-gpio-portA"; |
| pdata->properties->idx = 0; |
| pdata->properties->ngpio = INTEL_QUARK_MFD_NGPIO; |
| pdata->properties->gpio_base = INTEL_QUARK_MFD_GPIO_BASE; |
| pdata->properties->irq = pdev->irq; |
| pdata->properties->irq_shared = true; |
| |
| cell->platform_data = pdata; |
| cell->pdata_size = sizeof(*pdata); |
| |
| return 0; |
| } |
| |
| static int intel_quark_mfd_probe(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| struct intel_quark_mfd *quark_mfd; |
| int ret; |
| |
| ret = pcim_enable_device(pdev); |
| if (ret) |
| return ret; |
| |
| quark_mfd = devm_kzalloc(&pdev->dev, sizeof(*quark_mfd), GFP_KERNEL); |
| if (!quark_mfd) |
| return -ENOMEM; |
| quark_mfd->pdev = pdev; |
| |
| ret = intel_quark_register_i2c_clk(quark_mfd); |
| if (ret) |
| return ret; |
| |
| dev_set_drvdata(&pdev->dev, quark_mfd); |
| |
| ret = intel_quark_i2c_setup(pdev, &intel_quark_mfd_cells[1]); |
| if (ret) |
| return ret; |
| |
| ret = intel_quark_gpio_setup(pdev, &intel_quark_mfd_cells[0]); |
| if (ret) |
| return ret; |
| |
| return mfd_add_devices(&pdev->dev, 0, intel_quark_mfd_cells, |
| ARRAY_SIZE(intel_quark_mfd_cells), NULL, 0, |
| NULL); |
| } |
| |
| static void intel_quark_mfd_remove(struct pci_dev *pdev) |
| { |
| intel_quark_unregister_i2c_clk(pdev); |
| mfd_remove_devices(&pdev->dev); |
| } |
| |
| static struct pci_driver intel_quark_mfd_driver = { |
| .name = "intel_quark_mfd_i2c_gpio", |
| .id_table = intel_quark_mfd_ids, |
| .probe = intel_quark_mfd_probe, |
| .remove = intel_quark_mfd_remove, |
| }; |
| |
| module_pci_driver(intel_quark_mfd_driver); |
| |
| MODULE_AUTHOR("Raymond Tan <raymond.tan@intel.com>"); |
| MODULE_DESCRIPTION("Intel Quark MFD PCI driver for I2C & GPIO"); |
| MODULE_LICENSE("GPL v2"); |