[MIPS] SNI RM updates
- use RTC_CLASS instead of GEN_RTC
- get rid of ds1216 in favour of a RTC_CLASS driver
- use correct console device for older RM400
- use physical addresses for 82596 device
- use 128 byte L1 cache line size (this is needed because most of the
SNI caches are using 128 L2 cache lines)
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index 31ab80f..6850a29 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -15,7 +15,6 @@
#include <asm/sni.h>
#include <asm/time.h>
-#include <asm/ds1216.h>
#define PORT(_base,_irq) \
{ \
@@ -40,20 +39,34 @@
},
};
+static struct resource a20r_ds1216_rsrc[] = {
+ {
+ .start = 0x1c081ffc,
+ .end = 0x1c081fff,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct platform_device a20r_ds1216_device = {
+ .name = "rtc-ds1216",
+ .num_resources = ARRAY_SIZE(a20r_ds1216_rsrc),
+ .resource = a20r_ds1216_rsrc
+};
+
static struct resource snirm_82596_rsrc[] = {
{
- .start = 0xb8000000,
- .end = 0xb8000004,
+ .start = 0x18000000,
+ .end = 0x18000004,
.flags = IORESOURCE_MEM
},
{
- .start = 0xb8010000,
- .end = 0xb8010004,
+ .start = 0x18010000,
+ .end = 0x18010004,
.flags = IORESOURCE_MEM
},
{
- .start = 0xbff00000,
- .end = 0xbff00020,
+ .start = 0x1ff00000,
+ .end = 0x1ff00020,
.flags = IORESOURCE_MEM
},
{
@@ -205,8 +218,7 @@
void sni_a20r_init(void)
{
- ds1216_base = (volatile unsigned char *) SNI_DS1216_A20R_BASE;
- rtc_mips_get_time = ds1216_get_cmos_time;
+ /* FIXME, remove if not needed */
}
static int __init snirm_a20r_setup_devinit(void)
@@ -218,6 +230,7 @@
platform_device_register(&snirm_53c710_pdev);
platform_device_register(&sc26xx_pdev);
platform_device_register(&a20r_serial8250_device);
+ platform_device_register(&a20r_ds1216_device);
break;
}