| /* |
| * Synopsys DesignWare I2C adapter driver (master only). |
| * |
| * Based on the TI DAVINCI I2C adapter driver. |
| * |
| * Copyright (C) 2006 Texas Instruments. |
| * Copyright (C) 2007 MontaVista Software Inc. |
| * Copyright (C) 2009 Provigent Ltd. |
| * Copyright (C) 2011, 2015 Intel Corporation. |
| * |
| * ---------------------------------------------------------------------------- |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * ---------------------------------------------------------------------------- |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/errno.h> |
| #include <linux/sched.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/pci.h> |
| #include <linux/pm_runtime.h> |
| #include "i2c-designware-core.h" |
| |
| #define DRIVER_NAME "i2c-designware-pci" |
| |
| enum dw_pci_ctl_id_t { |
| medfield_0, |
| medfield_1, |
| medfield_2, |
| medfield_3, |
| medfield_4, |
| medfield_5, |
| |
| baytrail, |
| haswell, |
| }; |
| |
| struct dw_scl_sda_cfg { |
| u32 ss_hcnt; |
| u32 fs_hcnt; |
| u32 ss_lcnt; |
| u32 fs_lcnt; |
| u32 sda_hold; |
| }; |
| |
| struct dw_pci_controller { |
| u32 bus_num; |
| u32 bus_cfg; |
| u32 tx_fifo_depth; |
| u32 rx_fifo_depth; |
| u32 clk_khz; |
| u32 functionality; |
| struct dw_scl_sda_cfg *scl_sda_cfg; |
| }; |
| |
| #define INTEL_MID_STD_CFG (DW_IC_CON_MASTER | \ |
| DW_IC_CON_SLAVE_DISABLE | \ |
| DW_IC_CON_RESTART_EN) |
| |
| #define DW_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C | \ |
| I2C_FUNC_SMBUS_BYTE | \ |
| I2C_FUNC_SMBUS_BYTE_DATA | \ |
| I2C_FUNC_SMBUS_WORD_DATA | \ |
| I2C_FUNC_SMBUS_I2C_BLOCK) |
| |
| /* BayTrail HCNT/LCNT/SDA hold time */ |
| static struct dw_scl_sda_cfg byt_config = { |
| .ss_hcnt = 0x200, |
| .fs_hcnt = 0x55, |
| .ss_lcnt = 0x200, |
| .fs_lcnt = 0x99, |
| .sda_hold = 0x6, |
| }; |
| |
| /* Haswell HCNT/LCNT/SDA hold time */ |
| static struct dw_scl_sda_cfg hsw_config = { |
| .ss_hcnt = 0x01b0, |
| .fs_hcnt = 0x48, |
| .ss_lcnt = 0x01fb, |
| .fs_lcnt = 0xa0, |
| .sda_hold = 0x9, |
| }; |
| |
| static struct dw_pci_controller dw_pci_controllers[] = { |
| [medfield_0] = { |
| .bus_num = 0, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .clk_khz = 25000, |
| }, |
| [medfield_1] = { |
| .bus_num = 1, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .clk_khz = 25000, |
| }, |
| [medfield_2] = { |
| .bus_num = 2, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .clk_khz = 25000, |
| }, |
| [medfield_3] = { |
| .bus_num = 3, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_STD, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .clk_khz = 25000, |
| }, |
| [medfield_4] = { |
| .bus_num = 4, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .clk_khz = 25000, |
| }, |
| [medfield_5] = { |
| .bus_num = 5, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .clk_khz = 25000, |
| }, |
| [baytrail] = { |
| .bus_num = -1, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .functionality = I2C_FUNC_10BIT_ADDR, |
| .scl_sda_cfg = &byt_config, |
| }, |
| [haswell] = { |
| .bus_num = -1, |
| .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, |
| .tx_fifo_depth = 32, |
| .rx_fifo_depth = 32, |
| .functionality = I2C_FUNC_10BIT_ADDR, |
| .scl_sda_cfg = &hsw_config, |
| }, |
| }; |
| |
| static struct i2c_algorithm i2c_dw_algo = { |
| .master_xfer = i2c_dw_xfer, |
| .functionality = i2c_dw_func, |
| }; |
| |
| #ifdef CONFIG_PM |
| static int i2c_dw_pci_suspend(struct device *dev) |
| { |
| struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); |
| |
| i2c_dw_disable(pci_get_drvdata(pdev)); |
| return 0; |
| } |
| |
| static int i2c_dw_pci_resume(struct device *dev) |
| { |
| struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); |
| |
| return i2c_dw_init(pci_get_drvdata(pdev)); |
| } |
| #endif |
| |
| static UNIVERSAL_DEV_PM_OPS(i2c_dw_pm_ops, i2c_dw_pci_suspend, |
| i2c_dw_pci_resume, NULL); |
| |
| static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev) |
| { |
| return dev->controller->clk_khz; |
| } |
| |
| static int i2c_dw_pci_probe(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| struct dw_i2c_dev *dev; |
| struct i2c_adapter *adap; |
| int r; |
| struct dw_pci_controller *controller; |
| struct dw_scl_sda_cfg *cfg; |
| |
| if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) { |
| dev_err(&pdev->dev, "%s: invalid driver data %ld\n", __func__, |
| id->driver_data); |
| return -EINVAL; |
| } |
| |
| controller = &dw_pci_controllers[id->driver_data]; |
| |
| r = pcim_enable_device(pdev); |
| if (r) { |
| dev_err(&pdev->dev, "Failed to enable I2C PCI device (%d)\n", |
| r); |
| return r; |
| } |
| |
| r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev)); |
| if (r) { |
| dev_err(&pdev->dev, "I/O memory remapping failed\n"); |
| return r; |
| } |
| |
| dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL); |
| if (!dev) |
| return -ENOMEM; |
| |
| init_completion(&dev->cmd_complete); |
| mutex_init(&dev->lock); |
| dev->clk = NULL; |
| dev->controller = controller; |
| dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz; |
| dev->base = pcim_iomap_table(pdev)[0]; |
| dev->dev = &pdev->dev; |
| dev->functionality = controller->functionality | |
| DW_DEFAULT_FUNCTIONALITY; |
| |
| dev->master_cfg = controller->bus_cfg; |
| if (controller->scl_sda_cfg) { |
| cfg = controller->scl_sda_cfg; |
| dev->ss_hcnt = cfg->ss_hcnt; |
| dev->fs_hcnt = cfg->fs_hcnt; |
| dev->ss_lcnt = cfg->ss_lcnt; |
| dev->fs_lcnt = cfg->fs_lcnt; |
| dev->sda_hold_time = cfg->sda_hold; |
| } |
| |
| pci_set_drvdata(pdev, dev); |
| |
| dev->tx_fifo_depth = controller->tx_fifo_depth; |
| dev->rx_fifo_depth = controller->rx_fifo_depth; |
| r = i2c_dw_init(dev); |
| if (r) |
| return r; |
| |
| adap = &dev->adapter; |
| i2c_set_adapdata(adap, dev); |
| adap->owner = THIS_MODULE; |
| adap->class = 0; |
| adap->algo = &i2c_dw_algo; |
| adap->dev.parent = &pdev->dev; |
| adap->nr = controller->bus_num; |
| |
| snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci"); |
| |
| r = devm_request_irq(&pdev->dev, pdev->irq, i2c_dw_isr, IRQF_SHARED, |
| adap->name, dev); |
| if (r) { |
| dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq); |
| return r; |
| } |
| |
| i2c_dw_disable_int(dev); |
| i2c_dw_clear_int(dev); |
| r = i2c_add_numbered_adapter(adap); |
| if (r) { |
| dev_err(&pdev->dev, "failure adding adapter\n"); |
| return r; |
| } |
| |
| pm_runtime_set_autosuspend_delay(&pdev->dev, 1000); |
| pm_runtime_use_autosuspend(&pdev->dev); |
| pm_runtime_put_autosuspend(&pdev->dev); |
| pm_runtime_allow(&pdev->dev); |
| |
| return 0; |
| } |
| |
| static void i2c_dw_pci_remove(struct pci_dev *pdev) |
| { |
| struct dw_i2c_dev *dev = pci_get_drvdata(pdev); |
| |
| i2c_dw_disable(dev); |
| pm_runtime_forbid(&pdev->dev); |
| pm_runtime_get_noresume(&pdev->dev); |
| |
| i2c_del_adapter(&dev->adapter); |
| } |
| |
| /* work with hotplug and coldplug */ |
| MODULE_ALIAS("i2c_designware-pci"); |
| |
| static const struct pci_device_id i2_designware_pci_ids[] = { |
| /* Medfield */ |
| { PCI_VDEVICE(INTEL, 0x0817), medfield_3 }, |
| { PCI_VDEVICE(INTEL, 0x0818), medfield_4 }, |
| { PCI_VDEVICE(INTEL, 0x0819), medfield_5 }, |
| { PCI_VDEVICE(INTEL, 0x082C), medfield_0 }, |
| { PCI_VDEVICE(INTEL, 0x082D), medfield_1 }, |
| { PCI_VDEVICE(INTEL, 0x082E), medfield_2 }, |
| /* Baytrail */ |
| { PCI_VDEVICE(INTEL, 0x0F41), baytrail }, |
| { PCI_VDEVICE(INTEL, 0x0F42), baytrail }, |
| { PCI_VDEVICE(INTEL, 0x0F43), baytrail }, |
| { PCI_VDEVICE(INTEL, 0x0F44), baytrail }, |
| { PCI_VDEVICE(INTEL, 0x0F45), baytrail }, |
| { PCI_VDEVICE(INTEL, 0x0F46), baytrail }, |
| { PCI_VDEVICE(INTEL, 0x0F47), baytrail }, |
| /* Haswell */ |
| { PCI_VDEVICE(INTEL, 0x9c61), haswell }, |
| { PCI_VDEVICE(INTEL, 0x9c62), haswell }, |
| /* Braswell / Cherrytrail */ |
| { PCI_VDEVICE(INTEL, 0x22C1), baytrail }, |
| { PCI_VDEVICE(INTEL, 0x22C2), baytrail }, |
| { PCI_VDEVICE(INTEL, 0x22C3), baytrail }, |
| { PCI_VDEVICE(INTEL, 0x22C4), baytrail }, |
| { PCI_VDEVICE(INTEL, 0x22C5), baytrail }, |
| { PCI_VDEVICE(INTEL, 0x22C6), baytrail }, |
| { PCI_VDEVICE(INTEL, 0x22C7), baytrail }, |
| { 0,} |
| }; |
| MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids); |
| |
| static struct pci_driver dw_i2c_driver = { |
| .name = DRIVER_NAME, |
| .id_table = i2_designware_pci_ids, |
| .probe = i2c_dw_pci_probe, |
| .remove = i2c_dw_pci_remove, |
| .driver = { |
| .pm = &i2c_dw_pm_ops, |
| }, |
| }; |
| |
| module_pci_driver(dw_i2c_driver); |
| |
| MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); |
| MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter"); |
| MODULE_LICENSE("GPL"); |