cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STA
The GO_CONCURRENT regulatory definition can be extended to station
interfaces requesting to IR as part of TDLS off-channel operations.
Rename the GO_CONCURRENT flag to IR_CONCURRENT and allow the added
use-case.
Change internal users of GO_CONCURRENT to use the new definition.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index 83903a5..0b5a81d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -248,7 +248,7 @@
*/
if ((nvm_flags & NVM_CHANNEL_GO_CONCURRENT) &&
(flags & IEEE80211_CHAN_NO_IR))
- flags |= IEEE80211_CHAN_GO_CONCURRENT;
+ flags |= IEEE80211_CHAN_IR_CONCURRENT;
return flags;
}
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index f8d6813..d63ecec 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -111,7 +111,7 @@
* This may be due to the driver or due to regulatory bandwidth
* restrictions.
* @IEEE80211_CHAN_INDOOR_ONLY: see %NL80211_FREQUENCY_ATTR_INDOOR_ONLY
- * @IEEE80211_CHAN_GO_CONCURRENT: see %NL80211_FREQUENCY_ATTR_GO_CONCURRENT
+ * @IEEE80211_CHAN_IR_CONCURRENT: see %NL80211_FREQUENCY_ATTR_IR_CONCURRENT
* @IEEE80211_CHAN_NO_20MHZ: 20 MHz bandwidth is not permitted
* on this channel.
* @IEEE80211_CHAN_NO_10MHZ: 10 MHz bandwidth is not permitted
@@ -129,7 +129,7 @@
IEEE80211_CHAN_NO_80MHZ = 1<<7,
IEEE80211_CHAN_NO_160MHZ = 1<<8,
IEEE80211_CHAN_INDOOR_ONLY = 1<<9,
- IEEE80211_CHAN_GO_CONCURRENT = 1<<10,
+ IEEE80211_CHAN_IR_CONCURRENT = 1<<10,
IEEE80211_CHAN_NO_20MHZ = 1<<11,
IEEE80211_CHAN_NO_10MHZ = 1<<12,
};
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 241220c..c0ab6b0 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2620,16 +2620,17 @@
* an indoor surroundings, i.e., it is connected to AC power (and not
* through portable DC inverters) or is under the control of a master
* that is acting as an AP and is connected to AC power.
- * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this
+ * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this
* channel if it's connected concurrently to a BSS on the same channel on
* the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
- * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a
- * channel that has the GO_CONCURRENT attribute set can be done when there
- * is a clear assessment that the device is operating under the guidance of
- * an authorized master, i.e., setting up a GO while the device is also
- * connected to an AP with DFS and radar detection on the UNII band (it is
- * up to user-space, i.e., wpa_supplicant to perform the required
- * verifications)
+ * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS
+ * off-channel on a channel that has the IR_CONCURRENT attribute set can be
+ * done when there is a clear assessment that the device is operating under
+ * the guidance of an authorized master, i.e., setting up a GO or TDLS
+ * off-channel while the device is also connected to an AP with DFS and
+ * radar detection on the UNII band (it is up to user-space, i.e.,
+ * wpa_supplicant to perform the required verifications). Using this
+ * attribute for IR is disallowed for master interfaces (IBSS, AP).
* @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
* on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
@@ -2641,7 +2642,7 @@
* See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
* for more information on the FCC description of the relaxations allowed
* by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
- * NL80211_FREQUENCY_ATTR_GO_CONCURRENT.
+ * NL80211_FREQUENCY_ATTR_IR_CONCURRENT.
*/
enum nl80211_frequency_attr {
__NL80211_FREQUENCY_ATTR_INVALID,
@@ -2659,7 +2660,7 @@
NL80211_FREQUENCY_ATTR_NO_160MHZ,
NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
- NL80211_FREQUENCY_ATTR_GO_CONCURRENT,
+ NL80211_FREQUENCY_ATTR_IR_CONCURRENT,
NL80211_FREQUENCY_ATTR_NO_20MHZ,
NL80211_FREQUENCY_ATTR_NO_10MHZ,
@@ -2672,6 +2673,8 @@
#define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR
#define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR
#define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR
+#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
+ NL80211_FREQUENCY_ATTR_IR_CONCURRENT
/**
* enum nl80211_bitrate_attr - bitrate attributes
@@ -2830,7 +2833,7 @@
* @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
* base on contiguous rules and wider channels will be allowed to cross
* multiple contiguous/overlapping frequency ranges.
- * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT
+ * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT
* @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
* @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
* @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
@@ -2847,7 +2850,7 @@
NL80211_RRF_NO_IR = 1<<7,
__NL80211_RRF_NO_IBSS = 1<<8,
NL80211_RRF_AUTO_BW = 1<<11,
- NL80211_RRF_GO_CONCURRENT = 1<<12,
+ NL80211_RRF_IR_CONCURRENT = 1<<12,
NL80211_RRF_NO_HT40MINUS = 1<<13,
NL80211_RRF_NO_HT40PLUS = 1<<14,
NL80211_RRF_NO_80MHZ = 1<<15,
@@ -2859,6 +2862,7 @@
#define NL80211_RRF_NO_IR NL80211_RRF_NO_IR
#define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\
NL80211_RRF_NO_HT40PLUS)
+#define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT
/* For backport compatibility with older userspace */
#define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index 5bcffdb..915b328 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -698,19 +698,20 @@
EXPORT_SYMBOL(cfg80211_chandef_usable);
/*
- * For GO only, check if the channel can be used under permissive conditions
- * mandated by the some regulatory bodies, i.e., the channel is marked with
- * IEEE80211_CHAN_GO_CONCURRENT and there is an additional station interface
+ * Check if the channel can be used under permissive conditions mandated by
+ * some regulatory bodies, i.e., the channel is marked with
+ * IEEE80211_CHAN_IR_CONCURRENT and there is an additional station interface
* associated to an AP on the same channel or on the same UNII band
* (assuming that the AP is an authorized master).
- * In addition allow the GO to operate on a channel on which indoor operation is
+ * In addition allow operation on a channel on which indoor operation is
* allowed, iff we are currently operating in an indoor environment.
*/
-static bool cfg80211_go_permissive_chan(struct cfg80211_registered_device *rdev,
+static bool cfg80211_ir_permissive_chan(struct wiphy *wiphy,
+ enum nl80211_iftype iftype,
struct ieee80211_channel *chan)
{
struct wireless_dev *wdev;
- struct wiphy *wiphy = wiphy_idx_to_wiphy(rdev->wiphy_idx);
+ struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
ASSERT_RTNL();
@@ -718,16 +719,22 @@
!(wiphy->regulatory_flags & REGULATORY_ENABLE_RELAX_NO_IR))
return false;
+ /* only valid for GO and TDLS off-channel (station/p2p-CL) */
+ if (iftype != NL80211_IFTYPE_P2P_GO &&
+ iftype != NL80211_IFTYPE_STATION &&
+ iftype != NL80211_IFTYPE_P2P_CLIENT)
+ return false;
+
if (regulatory_indoor_allowed() &&
(chan->flags & IEEE80211_CHAN_INDOOR_ONLY))
return true;
- if (!(chan->flags & IEEE80211_CHAN_GO_CONCURRENT))
+ if (!(chan->flags & IEEE80211_CHAN_IR_CONCURRENT))
return false;
/*
* Generally, it is possible to rely on another device/driver to allow
- * the GO concurrent relaxation, however, since the device can further
+ * the IR concurrent relaxation, however, since the device can further
* enforce the relaxation (by doing a similar verifications as this),
* and thus fail the GO instantiation, consider only the interfaces of
* the current registered device.
@@ -748,7 +755,8 @@
* GO_CONCURRENT is disconnected now. But then we must make sure
* we're not outdoor on an indoor-only channel.
*/
- if (wdev->iftype == NL80211_IFTYPE_P2P_GO &&
+ if (iftype == NL80211_IFTYPE_P2P_GO &&
+ wdev->iftype == NL80211_IFTYPE_P2P_GO &&
wdev->beacon_interval &&
!(chan->flags & IEEE80211_CHAN_INDOOR_ONLY))
other_chan = wdev->chandef.chan;
@@ -793,7 +801,6 @@
struct cfg80211_chan_def *chandef,
enum nl80211_iftype iftype)
{
- struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
bool res;
u32 prohibited_flags = IEEE80211_CHAN_DISABLED |
IEEE80211_CHAN_RADAR;
@@ -801,13 +808,12 @@
trace_cfg80211_reg_can_beacon(wiphy, chandef, iftype);
/*
- * Under certain conditions suggested by the some regulatory bodies
- * a GO can operate on channels marked with IEEE80211_NO_IR
- * so set this flag only if such relaxations are not enabled and
- * the conditions are not met.
+ * Under certain conditions suggested by some regulatory bodies a
+ * GO/STA can IR on channels marked with IEEE80211_NO_IR. Set this flag
+ * only if such relaxations are not enabled and the conditions are not
+ * met.
*/
- if (iftype != NL80211_IFTYPE_P2P_GO ||
- !cfg80211_go_permissive_chan(rdev, chandef->chan))
+ if (!cfg80211_ir_permissive_chan(wiphy, iftype, chandef->chan))
prohibited_flags |= IEEE80211_CHAN_NO_IR;
if (cfg80211_chandef_dfs_required(wiphy, chandef, iftype) > 0 &&
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 8a33bba..c264eff 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -639,8 +639,8 @@
if ((chan->flags & IEEE80211_CHAN_INDOOR_ONLY) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_INDOOR_ONLY))
goto nla_put_failure;
- if ((chan->flags & IEEE80211_CHAN_GO_CONCURRENT) &&
- nla_put_flag(msg, NL80211_FREQUENCY_ATTR_GO_CONCURRENT))
+ if ((chan->flags & IEEE80211_CHAN_IR_CONCURRENT) &&
+ nla_put_flag(msg, NL80211_FREQUENCY_ATTR_IR_CONCURRENT))
goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_NO_20MHZ) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_20MHZ))
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 0e347f8..d359e06 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -989,8 +989,8 @@
channel_flags |= IEEE80211_CHAN_NO_OFDM;
if (rd_flags & NL80211_RRF_NO_OUTDOOR)
channel_flags |= IEEE80211_CHAN_INDOOR_ONLY;
- if (rd_flags & NL80211_RRF_GO_CONCURRENT)
- channel_flags |= IEEE80211_CHAN_GO_CONCURRENT;
+ if (rd_flags & NL80211_RRF_IR_CONCURRENT)
+ channel_flags |= IEEE80211_CHAN_IR_CONCURRENT;
if (rd_flags & NL80211_RRF_NO_HT40MINUS)
channel_flags |= IEEE80211_CHAN_NO_HT40MINUS;
if (rd_flags & NL80211_RRF_NO_HT40PLUS)