kbuild: trivial fixes in Makefile
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
diff --git a/Makefile b/Makefile
index a21c319..1c558a4 100644
--- a/Makefile
+++ b/Makefile
@@ -71,7 +71,7 @@
# In both cases the working directory must be the root of the kernel src.
# 1) O=
# Use "make O=dir/to/store/output/files/"
-#
+#
# 2) Set KBUILD_OUTPUT
# Set the environment variable KBUILD_OUTPUT to point to the directory
# where the output files shall be placed.
@@ -185,13 +185,13 @@
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi ; fi)
-HOSTCC = gcc
-HOSTCXX = g++
-HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
-HOSTCXXFLAGS = -O2
+HOSTCC = gcc
+HOSTCXX = g++
+HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCXXFLAGS = -O2
-# Decide whether to build built-in, modular, or both.
-# Normally, just do built-in.
+# Decide whether to build built-in, modular, or both.
+# Normally, just do built-in.
KBUILD_MODULES :=
KBUILD_BUILTIN := 1
@@ -199,7 +199,7 @@
# If we have only "make modules", don't compile built-in objects.
# When we're building modules with modversions, we need to consider
# the built-in objects during the descend as well, in order to
-# make sure the checksums are uptodate before we record them.
+# make sure the checksums are up to date before we record them.
ifeq ($(MAKECMDGOALS),modules)
KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
@@ -232,7 +232,7 @@
#
# If $(quiet) is empty, the whole command will be printed.
# If it is set to "quiet_", only the short version will be printed.
-# If it is set to "silent_", nothing wil be printed at all, since
+# If it is set to "silent_", nothing will be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
# A simple variant is to prefix commands with $(Q) - that's useful
@@ -268,7 +268,7 @@
include $(srctree)/scripts/Kbuild.include
# Do not use make's built-in rules and variables
-# This increases performance and avoid hard-to-debug behaviour
+# This increases performance and avoid hard-to-debug behavour
MAKEFLAGS += -rR
# Make variables (CC, etc...)
@@ -306,21 +306,21 @@
CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
-CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
- -fno-strict-aliasing -fno-common
-AFLAGS := -D__ASSEMBLY__
+CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
+ -fno-strict-aliasing -fno-common
+AFLAGS := -D__ASSEMBLY__
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
-export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION \
- ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
- CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \
- HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
+export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
+export ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
+export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE
+export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
-export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
+export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
# When compiling out-of-tree modules, put MODVERDIR in the module
@@ -358,7 +358,7 @@
# catch them early, and hand them over to scripts/kconfig/Makefile
# It is allowed to specify more targets when calling make, including
# mixing *config targets and build targets.
-# For example 'make oldconfig all'.
+# For example 'make oldconfig all'.
# Detect when mixed targets is specified, and make a second invocation
# of make so .config is not included in this case either (for *config).
@@ -417,7 +417,7 @@
ifeq ($(KBUILD_EXTMOD),)
# Additional helpers built in scripts/
# Carefully list dependencies so we do not try to build scripts twice
-# in parrallel
+# in parallel
PHONY += scripts
scripts: scripts_basic include/config/auto.conf
$(Q)$(MAKE) $(build)=$(@)
@@ -443,7 +443,7 @@
# If .config is newer than include/config/auto.conf, someone tinkered
# with it and forgot to run make oldconfig.
-# if auto.conf.cmd is missing then we are probarly in a cleaned tree so
+# if auto.conf.cmd is missing then we are probably in a cleaned tree so
# we execute the config step to be sure to catch updated Kconfig files
include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
ifeq ($(KBUILD_EXTMOD),)
@@ -460,7 +460,7 @@
# The all: target is the default when no target is given on the
# command line.
# This allow a user to issue only 'make' to build a kernel including modules
-# Defaults vmlinux but it is usually overriden in the arch makefile
+# Defaults vmlinux but it is usually overridden in the arch makefile
all: vmlinux
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
@@ -492,11 +492,11 @@
# warn about C99 declaration after statement
CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
-# disable pointer signedness warnings in gcc 4.0
+# disable pointer signed / unsigned warnings in gcc 4.0
CFLAGS += $(call cc-option,-Wno-pointer-sign,)
# Default kernel image to build when no specific target is given.
-# KBUILD_IMAGE may be overruled on the commandline or
+# KBUILD_IMAGE may be overruled on the command line or
# set in the environment
# Also any assignments in arch/$(ARCH)/Makefile take precedence over
# this default value
@@ -510,7 +510,7 @@
#
# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
# relocations required by build roots. This is not defined in the
-# makefile but the arguement can be passed to make if needed.
+# makefile but the argument can be passed to make if needed.
#
MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
@@ -556,7 +556,7 @@
# Build vmlinux
# ---------------------------------------------------------------------------
-# vmlinux is build from the objects selected by $(vmlinux-init) and
+# vmlinux is built from the objects selected by $(vmlinux-init) and
# $(vmlinux-main). Most are built-in.o files from top-level directories
# in the kernel tree, others are specified in arch/$(ARCH)Makefile.
# Ordering when linking is important, and $(vmlinux-init) must be first.
@@ -607,7 +607,7 @@
$(MAKE) $(build)=init
# Generate System.map
-quiet_cmd_sysmap = SYSMAP
+quiet_cmd_sysmap = SYSMAP
cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
# Link of vmlinux
@@ -754,10 +754,10 @@
localver = $(subst $(space),, \
$(shell cat /dev/null $(_localver)) \
$(patsubst "%",%,$(CONFIG_LOCALVERSION)))
-
+
# If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
# and if the SCM is know a tag from the SCM is appended.
-# The appended tag is determinded by the SCM used.
+# The appended tag is determined by the SCM used.
#
# Currently, only git is supported.
# Other SCMs can edit scripts/setlocalversion and add the appropriate
@@ -823,14 +823,14 @@
# All the preparing..
prepare prepare-all: prepare0
-# Leave this as default for preprocessing vmlinux.lds.S, which is now
-# done in arch/$(ARCH)/kernel/Makefile
+# Leave this as default for preprocessing vmlinux.lds.S, which is now
+# done in arch/$(ARCH)/kernel/Makefile
export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
-# FIXME: The asm symlink changes when $(ARCH) changes. That's
-# hard to detect, but I suppose "make mrproper" is a good idea
-# before switching between archs anyway.
+# FIXME: The asm symlink changes when $(ARCH) changes. That's
+# hard to detect, but I suppose "make mrproper" is a good idea
+# before switching between archs anyway.
include/asm:
@echo ' SYMLINK $@ -> include/asm-$(ARCH)'
@@ -870,7 +870,7 @@
ifdef CONFIG_MODULES
-# By default, build modules as well
+# By default, build modules as well
all: modules
@@ -968,7 +968,7 @@
$(call cmd,rmdirs)
$(call cmd,rmfiles)
@find . $(RCS_FIND_IGNORE) \
- \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-o -name '*.symtypes' \) \
-type f -print | xargs rm -f
@@ -993,9 +993,9 @@
distclean: mrproper
@find $(srctree) $(RCS_FIND_IGNORE) \
- \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
+ \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
- -o -name '.*.rej' -o -size 0 \
+ -o -name '.*.rej' -o -size 0 \
-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
-type f -print | xargs rm -f
@@ -1088,7 +1088,7 @@
# make M=dir modules Make all modules in specified dir
# make M=dir Same as 'make M=dir modules'
# make M=dir modules_install
-# Install the modules build in the module directory
+# Install the modules built in the module directory
# Assumes install directory is already created
# We are always building modules
@@ -1147,7 +1147,7 @@
clean: $(clean-dirs)
$(call cmd,rmdirs)
@find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \
- \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
-type f -print | xargs rm -f
@@ -1186,7 +1186,7 @@
ALLINCLUDE_ARCHS := $(ARCH)
endif
else
-#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour.
+#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behavour.
ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
endif