| /* |
| * Copyright (c) 2016, Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #ifndef UFS_QCOM_PHY_QRBTC_MSMSKUNK_H_ |
| #define UFS_QCOM_PHY_QRBTC_MSMSKUNK_H_ |
| |
| #include "phy-qcom-ufs-i.h" |
| |
| /* QCOM UFS PHY control registers */ |
| #define COM_OFF(x) (0x000 + x) |
| #define TX_OFF(n, x) (0x400 + (0x400 * n) + x) |
| #define RX_OFF(n, x) (0x600 + (0x400 * n) + x) |
| #define PHY_OFF(x) (0xC00 + x) |
| #define PHY_USR(x) (x) |
| |
| /* UFS PHY PLL block registers */ |
| #define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x00) |
| #define QSERDES_COM_PLL_VCOTAIL_EN COM_OFF(0x04) |
| #define QSERDES_COM_PLL_CNTRL COM_OFF(0x14) |
| #define QSERDES_COM_PLL_IP_SETI COM_OFF(0x18) |
| #define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x20) |
| #define QSERDES_COM_PLL_CP_SETI COM_OFF(0x24) |
| #define QSERDES_COM_PLL_IP_SETP COM_OFF(0x28) |
| #define QSERDES_COM_PLL_CP_SETP COM_OFF(0x2C) |
| #define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0x38) |
| #define QSERDES_COM_RES_CODE_TXBAND COM_OFF(0x3C) |
| #define QSERDES_COM_RESETSM_CNTRL COM_OFF(0x40) |
| #define QSERDES_COM_PLLLOCK_CMP1 COM_OFF(0x44) |
| #define QSERDES_COM_PLLLOCK_CMP2 COM_OFF(0x48) |
| #define QSERDES_COM_PLLLOCK_CMP3 COM_OFF(0x4C) |
| #define QSERDES_COM_PLLLOCK_CMP_EN COM_OFF(0x50) |
| #define QSERDES_COM_DEC_START1 COM_OFF(0x64) |
| #define QSERDES_COM_DIV_FRAC_START1 COM_OFF(0x98) |
| #define QSERDES_COM_DIV_FRAC_START2 COM_OFF(0x9C) |
| #define QSERDES_COM_DIV_FRAC_START3 COM_OFF(0xA0) |
| #define QSERDES_COM_DEC_START2 COM_OFF(0xA4) |
| #define QSERDES_COM_PLL_RXTXEPCLK_EN COM_OFF(0xA8) |
| #define QSERDES_COM_PLL_CRCTRL COM_OFF(0xAC) |
| #define QSERDES_COM_PLL_CLKEPDIV COM_OFF(0xB0) |
| #define QSERDES_COM_RESET_SM COM_OFF(0xBC) |
| |
| /* RX LANE n (0, 1) registers */ |
| #define QSERDES_RX_CDR_CONTROL(n) RX_OFF(n, 0x0) |
| #define QSERDES_RX_RX_IQ_RXDET_EN(n) RX_OFF(n, 0x28) |
| #define QSERDES_RX_SIGDET_CNTRL(n) RX_OFF(n, 0x34) |
| #define QSERDES_RX_RX_BAND(n) RX_OFF(n, 0x38) |
| #define QSERDES_RX_CDR_CONTROL_HALF(n) RX_OFF(n, 0x98) |
| #define QSERDES_RX_CDR_CONTROL_QUARTER(n) RX_OFF(n, 0x9C) |
| #define QSERDES_RX_PWM_CNTRL1(n) RX_OFF(n, 0x80) |
| #define QSERDES_RX_PWM_CNTRL2(n) RX_OFF(n, 0x84) |
| #define QSERDES_RX_PWM_NDIV(n) RX_OFF(n, 0x88) |
| #define QSERDES_RX_SIGDET_CNTRL2(n) RX_OFF(n, 0x8C) |
| #define QSERDES_RX_UFS_CNTRL(n) RX_OFF(n, 0x90) |
| |
| /* UFS PHY registers */ |
| #define UFS_PHY_PHY_START PHY_OFF(0x00) |
| #define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04) |
| #define UFS_PHY_TIMER_20US_CORECLK_STEPS_MSB PHY_OFF(0x08) |
| #define UFS_PHY_TIMER_20US_CORECLK_STEPS_LSB PHY_OFF(0x0C) |
| #define UFS_PHY_RX_SYM_RESYNC_CTRL PHY_OFF(0x134) |
| |
| /* QRBTC V2 USER REGISTERS */ |
| #define U11_UFS_RESET_REG_OFFSET PHY_USR(0x4) |
| #define U11_QRBTC_CONTROL_OFFSET PHY_USR(0x18) |
| #define U11_QRBTC_TX_CLK_CTRL PHY_USR(0x20) |
| |
| static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = { |
| UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_PHY_START, 0x00), |
| UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x00), |
| UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SYM_RESYNC_CTRL, 0x03), |
| UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TIMER_20US_CORECLK_STEPS_MSB, 0x0F), |
| UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TIMER_20US_CORECLK_STEPS_LSB, 0x00), |
| |
| /* QSERDES Common */ |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3F), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0x03), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x16), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_TXBAND, 0xC0), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0x03), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CNTRL, 0x24), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x10), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x13), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0x43), |
| |
| /* QSERDES RX0 */ |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_PWM_CNTRL1(0), 0x08), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_PWM_CNTRL2(0), 0x40), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_PWM_NDIV(0), 0x30), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL(0), 0x40), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0C), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL(0), 0xC0), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL2(0), 0x07), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_BAND(0), 0x06), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UFS_CNTRL(0), 0x00), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_IQ_RXDET_EN(0), 0xF3), |
| |
| /* QSERDES RX1 */ |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_PWM_CNTRL1(1), 0x08), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_PWM_CNTRL2(1), 0x40), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_PWM_NDIV(1), 0x30), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL(1), 0x40), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0C), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL(1), 0xC0), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL2(1), 0x07), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_BAND(1), 0x06), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UFS_CNTRL(1), 0x00), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_IQ_RXDET_EN(1), 0xF3), |
| |
| /* QSERDES PLL Settings - Series A */ |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x10), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xFF), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x07), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x0F), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x07), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x01), |
| }; |
| |
| static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = { |
| /* QSERDES PLL Settings - Series B */ |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x98), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x10), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0x65), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x1E), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x07), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x0F), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x07), |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x01), |
| }; |
| |
| |
| /* |
| * This structure represents the qrbtc-msmskunk specific phy. |
| * common_cfg MUST remain the first field in this structure |
| * in case extra fields are added. This way, when calling |
| * get_ufs_qcom_phy() of generic phy, we can extract the |
| * common phy structure (struct ufs_qcom_phy) out of it |
| * regardless of the relevant specific phy. |
| */ |
| struct ufs_qcom_phy_qrbtc_msmskunk { |
| struct ufs_qcom_phy common_cfg; |
| }; |
| |
| #endif |