Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
drivers/net/ethernet/chelsio/cxgb4vf/sge.c
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
sge.c was overlapping two changes, one to use the new
__dev_alloc_page() in net-next, and one to use s->fl_pg_order in net.
ixgbe_phy.c was a set of overlapping whitespace changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
index 6fe300e..cca6049 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
@@ -79,8 +79,9 @@
app.protocol = dcb->app_priority[i].protocolid;
if (dcb->dcb_version == FW_PORT_DCB_VER_IEEE) {
+ app.priority = dcb->app_priority[i].user_prio_map;
app.selector = dcb->app_priority[i].sel_field + 1;
- err = dcb_ieee_setapp(dev, &app);
+ err = dcb_ieee_delapp(dev, &app);
} else {
app.selector = !!(dcb->app_priority[i].sel_field);
err = dcb_setapp(dev, &app);
@@ -122,7 +123,11 @@
case CXGB4_DCB_INPUT_FW_ENABLED: {
/* we're going to use Firmware DCB */
dcb->state = CXGB4_DCB_STATE_FW_INCOMPLETE;
- dcb->supported = CXGB4_DCBX_FW_SUPPORT;
+ dcb->supported = DCB_CAP_DCBX_LLD_MANAGED;
+ if (dcb->dcb_version == FW_PORT_DCB_VER_IEEE)
+ dcb->supported |= DCB_CAP_DCBX_VER_IEEE;
+ else
+ dcb->supported |= DCB_CAP_DCBX_VER_CEE;
break;
}
@@ -436,14 +441,17 @@
*up_tc_map = (1 << tc);
/* prio_type is link strict */
- *prio_type = 0x2;
+ if (*pgid != 0xF)
+ *prio_type = 0x2;
}
static void cxgb4_getpgtccfg_tx(struct net_device *dev, int tc,
u8 *prio_type, u8 *pgid, u8 *bw_per,
u8 *up_tc_map)
{
- return cxgb4_getpgtccfg(dev, tc, prio_type, pgid, bw_per, up_tc_map, 1);
+ /* tc 0 is written at MSB position */
+ return cxgb4_getpgtccfg(dev, (7 - tc), prio_type, pgid, bw_per,
+ up_tc_map, 1);
}
@@ -451,7 +459,9 @@
u8 *prio_type, u8 *pgid, u8 *bw_per,
u8 *up_tc_map)
{
- return cxgb4_getpgtccfg(dev, tc, prio_type, pgid, bw_per, up_tc_map, 0);
+ /* tc 0 is written at MSB position */
+ return cxgb4_getpgtccfg(dev, (7 - tc), prio_type, pgid, bw_per,
+ up_tc_map, 0);
}
static void cxgb4_setpgtccfg_tx(struct net_device *dev, int tc,
@@ -461,6 +471,7 @@
struct fw_port_cmd pcmd;
struct port_info *pi = netdev2pinfo(dev);
struct adapter *adap = pi->adapter;
+ int fw_tc = 7 - tc;
u32 _pgid;
int err;
@@ -479,8 +490,8 @@
}
_pgid = be32_to_cpu(pcmd.u.dcb.pgid.pgid);
- _pgid &= ~(0xF << (tc * 4));
- _pgid |= pgid << (tc * 4);
+ _pgid &= ~(0xF << (fw_tc * 4));
+ _pgid |= pgid << (fw_tc * 4);
pcmd.u.dcb.pgid.pgid = cpu_to_be32(_pgid);
INIT_PORT_DCB_WRITE_CMD(pcmd, pi->port_id);
@@ -593,7 +604,7 @@
priority >= CXGB4_MAX_PRIORITY)
*pfccfg = 0;
else
- *pfccfg = (pi->dcb.pfcen >> priority) & 1;
+ *pfccfg = (pi->dcb.pfcen >> (7 - priority)) & 1;
}
/* Enable/disable Priority Pause Frames for the specified Traffic Class
@@ -618,9 +629,9 @@
pcmd.u.dcb.pfc.pfcen = pi->dcb.pfcen;
if (pfccfg)
- pcmd.u.dcb.pfc.pfcen |= (1 << priority);
+ pcmd.u.dcb.pfc.pfcen |= (1 << (7 - priority));
else
- pcmd.u.dcb.pfc.pfcen &= (~(1 << priority));
+ pcmd.u.dcb.pfc.pfcen &= (~(1 << (7 - priority)));
err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
if (err != FW_PORT_DCB_CFG_SUCCESS) {
diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index 91dbf98..5cc5e19 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -2914,7 +2914,8 @@
int t4_sge_init(struct adapter *adap)
{
struct sge *s = &adap->sge;
- u32 sge_control, sge_conm_ctrl;
+ u32 sge_control, sge_control2, sge_conm_ctrl;
+ unsigned int ingpadboundary, ingpackboundary;
int ret, egress_threshold;
/*
@@ -2924,8 +2925,31 @@
sge_control = t4_read_reg(adap, SGE_CONTROL);
s->pktshift = PKTSHIFT_GET(sge_control);
s->stat_len = (sge_control & EGRSTATUSPAGESIZE_MASK) ? 128 : 64;
- s->fl_align = 1 << (INGPADBOUNDARY_GET(sge_control) +
- X_INGPADBOUNDARY_SHIFT);
+
+ /* T4 uses a single control field to specify both the PCIe Padding and
+ * Packing Boundary. T5 introduced the ability to specify these
+ * separately. The actual Ingress Packet Data alignment boundary
+ * within Packed Buffer Mode is the maximum of these two
+ * specifications.
+ */
+ ingpadboundary = 1 << (INGPADBOUNDARY_GET(sge_control) +
+ X_INGPADBOUNDARY_SHIFT);
+ if (is_t4(adap->params.chip)) {
+ s->fl_align = ingpadboundary;
+ } else {
+ /* T5 has a different interpretation of one of the PCIe Packing
+ * Boundary values.
+ */
+ sge_control2 = t4_read_reg(adap, SGE_CONTROL2_A);
+ ingpackboundary = INGPACKBOUNDARY_G(sge_control2);
+ if (ingpackboundary == INGPACKBOUNDARY_16B_X)
+ ingpackboundary = 16;
+ else
+ ingpackboundary = 1 << (ingpackboundary +
+ INGPACKBOUNDARY_SHIFT_X);
+
+ s->fl_align = max(ingpadboundary, ingpackboundary);
+ }
if (adap->flags & USING_SOFT_PARAMS)
ret = t4_sge_init_soft(adap);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 2bb4efa..4d32df5 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3130,12 +3130,51 @@
HOSTPAGESIZEPF6(sge_hps) |
HOSTPAGESIZEPF7(sge_hps));
- t4_set_reg_field(adap, SGE_CONTROL,
- INGPADBOUNDARY_MASK |
- EGRSTATUSPAGESIZE_MASK,
- INGPADBOUNDARY(fl_align_log - 5) |
- EGRSTATUSPAGESIZE(stat_len != 64));
-
+ if (is_t4(adap->params.chip)) {
+ t4_set_reg_field(adap, SGE_CONTROL,
+ INGPADBOUNDARY_MASK |
+ EGRSTATUSPAGESIZE_MASK,
+ INGPADBOUNDARY(fl_align_log - 5) |
+ EGRSTATUSPAGESIZE(stat_len != 64));
+ } else {
+ /* T5 introduced the separation of the Free List Padding and
+ * Packing Boundaries. Thus, we can select a smaller Padding
+ * Boundary to avoid uselessly chewing up PCIe Link and Memory
+ * Bandwidth, and use a Packing Boundary which is large enough
+ * to avoid false sharing between CPUs, etc.
+ *
+ * For the PCI Link, the smaller the Padding Boundary the
+ * better. For the Memory Controller, a smaller Padding
+ * Boundary is better until we cross under the Memory Line
+ * Size (the minimum unit of transfer to/from Memory). If we
+ * have a Padding Boundary which is smaller than the Memory
+ * Line Size, that'll involve a Read-Modify-Write cycle on the
+ * Memory Controller which is never good. For T5 the smallest
+ * Padding Boundary which we can select is 32 bytes which is
+ * larger than any known Memory Controller Line Size so we'll
+ * use that.
+ *
+ * T5 has a different interpretation of the "0" value for the
+ * Packing Boundary. This corresponds to 16 bytes instead of
+ * the expected 32 bytes. We never have a Packing Boundary
+ * less than 32 bytes so we can't use that special value but
+ * on the other hand, if we wanted 32 bytes, the best we can
+ * really do is 64 bytes.
+ */
+ if (fl_align <= 32) {
+ fl_align = 64;
+ fl_align_log = 6;
+ }
+ t4_set_reg_field(adap, SGE_CONTROL,
+ INGPADBOUNDARY_MASK |
+ EGRSTATUSPAGESIZE_MASK,
+ INGPADBOUNDARY(INGPCIEBOUNDARY_32B_X) |
+ EGRSTATUSPAGESIZE(stat_len != 64));
+ t4_set_reg_field(adap, SGE_CONTROL2_A,
+ INGPACKBOUNDARY_V(INGPACKBOUNDARY_M),
+ INGPACKBOUNDARY_V(fl_align_log -
+ INGPACKBOUNDARY_SHIFT_X));
+ }
/*
* Adjust various SGE Free List Host Buffer Sizes.
*
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
index c8eb7ba..ccdf8a7 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
@@ -95,6 +95,7 @@
#define X_INGPADBOUNDARY_SHIFT 5
#define SGE_CONTROL 0x1008
+#define SGE_CONTROL2_A 0x1124
#define DCASYSTYPE 0x00080000U
#define RXPKTCPLMODE_MASK 0x00040000U
#define RXPKTCPLMODE_SHIFT 18
@@ -106,6 +107,7 @@
#define PKTSHIFT_SHIFT 10
#define PKTSHIFT(x) ((x) << PKTSHIFT_SHIFT)
#define PKTSHIFT_GET(x) (((x) & PKTSHIFT_MASK) >> PKTSHIFT_SHIFT)
+#define INGPCIEBOUNDARY_32B_X 0
#define INGPCIEBOUNDARY_MASK 0x00000380U
#define INGPCIEBOUNDARY_SHIFT 7
#define INGPCIEBOUNDARY(x) ((x) << INGPCIEBOUNDARY_SHIFT)
@@ -114,6 +116,14 @@
#define INGPADBOUNDARY(x) ((x) << INGPADBOUNDARY_SHIFT)
#define INGPADBOUNDARY_GET(x) (((x) & INGPADBOUNDARY_MASK) \
>> INGPADBOUNDARY_SHIFT)
+#define INGPACKBOUNDARY_16B_X 0
+#define INGPACKBOUNDARY_SHIFT_X 5
+
+#define INGPACKBOUNDARY_S 16
+#define INGPACKBOUNDARY_M 0x7U
+#define INGPACKBOUNDARY_V(x) ((x) << INGPACKBOUNDARY_S)
+#define INGPACKBOUNDARY_G(x) (((x) >> INGPACKBOUNDARY_S) \
+ & INGPACKBOUNDARY_M)
#define EGRPCIEBOUNDARY_MASK 0x0000000eU
#define EGRPCIEBOUNDARY_SHIFT 1
#define EGRPCIEBOUNDARY(x) ((x) << EGRPCIEBOUNDARY_SHIFT)
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h b/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h
index 68eaa9c..3d06e77 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h
@@ -299,6 +299,14 @@
u16 timer_val[SGE_NTIMERS]; /* interrupt holdoff timer array */
u8 counter_val[SGE_NCOUNTERS]; /* interrupt RX threshold array */
+ /* Decoded Adapter Parameters.
+ */
+ u32 fl_pg_order; /* large page allocation size */
+ u32 stat_len; /* length of status page at ring end */
+ u32 pktshift; /* padding between CPL & packet data */
+ u32 fl_align; /* response queue message alignment */
+ u32 fl_starve_thres; /* Free List starvation threshold */
+
/*
* Reverse maps from Absolute Queue IDs to associated queue pointers.
* The absolute Queue IDs are in a compact range which start at a
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
index aff6d37..50b1b34 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
@@ -51,14 +51,6 @@
#include "../cxgb4/t4_msg.h"
/*
- * Decoded Adapter Parameters.
- */
-static u32 FL_PG_ORDER; /* large page allocation size */
-static u32 STAT_LEN; /* length of status page at ring end */
-static u32 PKTSHIFT; /* padding between CPL and packet data */
-static u32 FL_ALIGN; /* response queue message alignment */
-
-/*
* Constants ...
*/
enum {
@@ -102,12 +94,6 @@
MAX_TIMER_TX_RECLAIM = 100,
/*
- * An FL with <= FL_STARVE_THRES buffers is starving and a periodic
- * timer will attempt to refill it.
- */
- FL_STARVE_THRES = 4,
-
- /*
* Suspend an Ethernet TX queue with fewer available descriptors than
* this. We always want to have room for a maximum sized packet:
* inline immediate data + MAX_SKB_FRAGS. This is the same as
@@ -264,15 +250,19 @@
/**
* fl_starving - return whether a Free List is starving.
+ * @adapter: pointer to the adapter
* @fl: the Free List
*
* Tests specified Free List to see whether the number of buffers
* available to the hardware has falled below our "starvation"
* threshold.
*/
-static inline bool fl_starving(const struct sge_fl *fl)
+static inline bool fl_starving(const struct adapter *adapter,
+ const struct sge_fl *fl)
{
- return fl->avail - fl->pend_cred <= FL_STARVE_THRES;
+ const struct sge *s = &adapter->sge;
+
+ return fl->avail - fl->pend_cred <= s->fl_starve_thres;
}
/**
@@ -457,13 +447,16 @@
/**
* get_buf_size - return the size of an RX Free List buffer.
+ * @adapter: pointer to the associated adapter
* @sdesc: pointer to the software buffer descriptor
*/
-static inline int get_buf_size(const struct rx_sw_desc *sdesc)
+static inline int get_buf_size(const struct adapter *adapter,
+ const struct rx_sw_desc *sdesc)
{
- return FL_PG_ORDER > 0 && (sdesc->dma_addr & RX_LARGE_BUF)
- ? (PAGE_SIZE << FL_PG_ORDER)
- : PAGE_SIZE;
+ const struct sge *s = &adapter->sge;
+
+ return (s->fl_pg_order > 0 && (sdesc->dma_addr & RX_LARGE_BUF)
+ ? (PAGE_SIZE << s->fl_pg_order) : PAGE_SIZE);
}
/**
@@ -483,7 +476,8 @@
if (is_buf_mapped(sdesc))
dma_unmap_page(adapter->pdev_dev, get_buf_addr(sdesc),
- get_buf_size(sdesc), PCI_DMA_FROMDEVICE);
+ get_buf_size(adapter, sdesc),
+ PCI_DMA_FROMDEVICE);
put_page(sdesc->page);
sdesc->page = NULL;
if (++fl->cidx == fl->size)
@@ -511,7 +505,8 @@
if (is_buf_mapped(sdesc))
dma_unmap_page(adapter->pdev_dev, get_buf_addr(sdesc),
- get_buf_size(sdesc), PCI_DMA_FROMDEVICE);
+ get_buf_size(adapter, sdesc),
+ PCI_DMA_FROMDEVICE);
sdesc->page = NULL;
if (++fl->cidx == fl->size)
fl->cidx = 0;
@@ -589,6 +584,7 @@
static unsigned int refill_fl(struct adapter *adapter, struct sge_fl *fl,
int n, gfp_t gfp)
{
+ struct sge *s = &adapter->sge;
struct page *page;
dma_addr_t dma_addr;
unsigned int cred = fl->avail;
@@ -610,11 +606,11 @@
* If we don't support large pages, drop directly into the small page
* allocation code.
*/
- if (FL_PG_ORDER == 0)
+ if (s->fl_pg_order == 0)
goto alloc_small_pages;
while (n) {
- page = __dev_alloc_pages(gfp, FL_PG_ORDER);
+ page = __dev_alloc_pages(gfp, s->fl_pg_order);
if (unlikely(!page)) {
/*
* We've failed inour attempt to allocate a "large
@@ -624,10 +620,10 @@
fl->large_alloc_failed++;
break;
}
- poison_buf(page, PAGE_SIZE << FL_PG_ORDER);
+ poison_buf(page, PAGE_SIZE << s->fl_pg_order);
dma_addr = dma_map_page(adapter->pdev_dev, page, 0,
- PAGE_SIZE << FL_PG_ORDER,
+ PAGE_SIZE << s->fl_pg_order,
PCI_DMA_FROMDEVICE);
if (unlikely(dma_mapping_error(adapter->pdev_dev, dma_addr))) {
/*
@@ -638,7 +634,7 @@
* because DMA mapping resources are typically
* critical resources once they become scarse.
*/
- __free_pages(page, FL_PG_ORDER);
+ __free_pages(page, s->fl_pg_order);
goto out;
}
dma_addr |= RX_LARGE_BUF;
@@ -694,7 +690,7 @@
fl->pend_cred += cred;
ring_fl_db(adapter, fl);
- if (unlikely(fl_starving(fl))) {
+ if (unlikely(fl_starving(adapter, fl))) {
smp_wmb();
set_bit(fl->cntxt_id, adapter->sge.starving_fl);
}
@@ -1469,6 +1465,8 @@
static void do_gro(struct sge_eth_rxq *rxq, const struct pkt_gl *gl,
const struct cpl_rx_pkt *pkt)
{
+ struct adapter *adapter = rxq->rspq.adapter;
+ struct sge *s = &adapter->sge;
int ret;
struct sk_buff *skb;
@@ -1479,8 +1477,8 @@
return;
}
- copy_frags(skb, gl, PKTSHIFT);
- skb->len = gl->tot_len - PKTSHIFT;
+ copy_frags(skb, gl, s->pktshift);
+ skb->len = gl->tot_len - s->pktshift;
skb->data_len = skb->len;
skb->truesize += skb->data_len;
skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -1517,6 +1515,8 @@
bool csum_ok = pkt->csum_calc && !pkt->err_vec &&
(rspq->netdev->features & NETIF_F_RXCSUM);
struct sge_eth_rxq *rxq = container_of(rspq, struct sge_eth_rxq, rspq);
+ struct adapter *adapter = rspq->adapter;
+ struct sge *s = &adapter->sge;
/*
* If this is a good TCP packet and we have Generic Receive Offload
@@ -1538,7 +1538,7 @@
rxq->stats.rx_drops++;
return 0;
}
- __skb_pull(skb, PKTSHIFT);
+ __skb_pull(skb, s->pktshift);
skb->protocol = eth_type_trans(skb, rspq->netdev);
skb_record_rx_queue(skb, rspq->idx);
rxq->stats.pkts++;
@@ -1649,6 +1649,8 @@
static int process_responses(struct sge_rspq *rspq, int budget)
{
struct sge_eth_rxq *rxq = container_of(rspq, struct sge_eth_rxq, rspq);
+ struct adapter *adapter = rspq->adapter;
+ struct sge *s = &adapter->sge;
int budget_left = budget;
while (likely(budget_left)) {
@@ -1698,7 +1700,7 @@
BUG_ON(frag >= MAX_SKB_FRAGS);
BUG_ON(rxq->fl.avail == 0);
sdesc = &rxq->fl.sdesc[rxq->fl.cidx];
- bufsz = get_buf_size(sdesc);
+ bufsz = get_buf_size(adapter, sdesc);
fp->page = sdesc->page;
fp->offset = rspq->offset;
fp->size = min(bufsz, len);
@@ -1727,7 +1729,7 @@
*/
ret = rspq->handler(rspq, rspq->cur_desc, &gl);
if (likely(ret == 0))
- rspq->offset += ALIGN(fp->size, FL_ALIGN);
+ rspq->offset += ALIGN(fp->size, s->fl_align);
else
restore_rx_bufs(&gl, &rxq->fl, frag);
} else if (likely(rsp_type == RSP_TYPE_CPL)) {
@@ -1964,7 +1966,7 @@
* schedule napi but the FL is no longer starving.
* No biggie.
*/
- if (fl_starving(fl)) {
+ if (fl_starving(adapter, fl)) {
struct sge_eth_rxq *rxq;
rxq = container_of(fl, struct sge_eth_rxq, fl);
@@ -2048,6 +2050,7 @@
int intr_dest,
struct sge_fl *fl, rspq_handler_t hnd)
{
+ struct sge *s = &adapter->sge;
struct port_info *pi = netdev_priv(dev);
struct fw_iq_cmd cmd, rpl;
int ret, iqandst, flsz = 0;
@@ -2118,7 +2121,7 @@
fl->size = roundup(fl->size, FL_PER_EQ_UNIT);
fl->desc = alloc_ring(adapter->pdev_dev, fl->size,
sizeof(__be64), sizeof(struct rx_sw_desc),
- &fl->addr, &fl->sdesc, STAT_LEN);
+ &fl->addr, &fl->sdesc, s->stat_len);
if (!fl->desc) {
ret = -ENOMEM;
goto err;
@@ -2130,7 +2133,7 @@
* free list ring) in Egress Queue Units.
*/
flsz = (fl->size / FL_PER_EQ_UNIT +
- STAT_LEN / EQ_UNIT);
+ s->stat_len / EQ_UNIT);
/*
* Fill in all the relevant firmware Ingress Queue Command
@@ -2218,6 +2221,7 @@
struct net_device *dev, struct netdev_queue *devq,
unsigned int iqid)
{
+ struct sge *s = &adapter->sge;
int ret, nentries;
struct fw_eq_eth_cmd cmd, rpl;
struct port_info *pi = netdev_priv(dev);
@@ -2226,7 +2230,7 @@
* Calculate the size of the hardware TX Queue (including the Status
* Page on the end of the TX Queue) in units of TX Descriptors.
*/
- nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc);
+ nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc);
/*
* Allocate the hardware ring for the TX ring (with space for its
@@ -2235,7 +2239,7 @@
txq->q.desc = alloc_ring(adapter->pdev_dev, txq->q.size,
sizeof(struct tx_desc),
sizeof(struct tx_sw_desc),
- &txq->q.phys_addr, &txq->q.sdesc, STAT_LEN);
+ &txq->q.phys_addr, &txq->q.sdesc, s->stat_len);
if (!txq->q.desc)
return -ENOMEM;
@@ -2308,8 +2312,10 @@
*/
static void free_txq(struct adapter *adapter, struct sge_txq *tq)
{
+ struct sge *s = &adapter->sge;
+
dma_free_coherent(adapter->pdev_dev,
- tq->size * sizeof(*tq->desc) + STAT_LEN,
+ tq->size * sizeof(*tq->desc) + s->stat_len,
tq->desc, tq->phys_addr);
tq->cntxt_id = 0;
tq->sdesc = NULL;
@@ -2323,6 +2329,7 @@
static void free_rspq_fl(struct adapter *adapter, struct sge_rspq *rspq,
struct sge_fl *fl)
{
+ struct sge *s = &adapter->sge;
unsigned int flid = fl ? fl->cntxt_id : 0xffff;
t4vf_iq_free(adapter, FW_IQ_TYPE_FL_INT_CAP,
@@ -2338,7 +2345,7 @@
if (fl) {
free_rx_bufs(adapter, fl, fl->avail);
dma_free_coherent(adapter->pdev_dev,
- fl->size * sizeof(*fl->desc) + STAT_LEN,
+ fl->size * sizeof(*fl->desc) + s->stat_len,
fl->desc, fl->addr);
kfree(fl->sdesc);
fl->sdesc = NULL;
@@ -2424,6 +2431,7 @@
u32 fl0 = sge_params->sge_fl_buffer_size[0];
u32 fl1 = sge_params->sge_fl_buffer_size[1];
struct sge *s = &adapter->sge;
+ unsigned int ingpadboundary, ingpackboundary;
/*
* Start by vetting the basic SGE parameters which have been set up by
@@ -2444,12 +2452,48 @@
* Now translate the adapter parameters into our internal forms.
*/
if (fl1)
- FL_PG_ORDER = ilog2(fl1) - PAGE_SHIFT;
- STAT_LEN = ((sge_params->sge_control & EGRSTATUSPAGESIZE_MASK)
- ? 128 : 64);
- PKTSHIFT = PKTSHIFT_GET(sge_params->sge_control);
- FL_ALIGN = 1 << (INGPADBOUNDARY_GET(sge_params->sge_control) +
- SGE_INGPADBOUNDARY_SHIFT);
+ s->fl_pg_order = ilog2(fl1) - PAGE_SHIFT;
+ s->stat_len = ((sge_params->sge_control & EGRSTATUSPAGESIZE_MASK)
+ ? 128 : 64);
+ s->pktshift = PKTSHIFT_GET(sge_params->sge_control);
+
+ /* T4 uses a single control field to specify both the PCIe Padding and
+ * Packing Boundary. T5 introduced the ability to specify these
+ * separately. The actual Ingress Packet Data alignment boundary
+ * within Packed Buffer Mode is the maximum of these two
+ * specifications. (Note that it makes no real practical sense to
+ * have the Pading Boudary be larger than the Packing Boundary but you
+ * could set the chip up that way and, in fact, legacy T4 code would
+ * end doing this because it would initialize the Padding Boundary and
+ * leave the Packing Boundary initialized to 0 (16 bytes).)
+ */
+ ingpadboundary = 1 << (INGPADBOUNDARY_GET(sge_params->sge_control) +
+ X_INGPADBOUNDARY_SHIFT);
+ if (is_t4(adapter->params.chip)) {
+ s->fl_align = ingpadboundary;
+ } else {
+ /* T5 has a different interpretation of one of the PCIe Packing
+ * Boundary values.
+ */
+ ingpackboundary = INGPACKBOUNDARY_G(sge_params->sge_control2);
+ if (ingpackboundary == INGPACKBOUNDARY_16B_X)
+ ingpackboundary = 16;
+ else
+ ingpackboundary = 1 << (ingpackboundary +
+ INGPACKBOUNDARY_SHIFT_X);
+
+ s->fl_align = max(ingpadboundary, ingpackboundary);
+ }
+
+ /* A FL with <= fl_starve_thres buffers is starving and a periodic
+ * timer will attempt to refill it. This needs to be larger than the
+ * SGE's Egress Congestion Threshold. If it isn't, then we can get
+ * stuck waiting for new packets while the SGE is waiting for us to
+ * give it more Free List entries. (Note that the SGE's Egress
+ * Congestion Threshold is in units of 2 Free List pointers.)
+ */
+ s->fl_starve_thres
+ = EGRTHRESHOLD_GET(sge_params->sge_congestion_control)*2 + 1;
/*
* Set up tasklet timers.
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h
index 2cfa439..a608c66 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h
@@ -134,11 +134,13 @@
*/
struct sge_params {
u32 sge_control; /* padding, boundaries, lengths, etc. */
+ u32 sge_control2; /* T5: more of the same */
u32 sge_host_page_size; /* RDMA page sizes */
u32 sge_queues_per_page; /* RDMA queues/page */
u32 sge_user_mode_limits; /* limits for BAR2 user mode accesses */
u32 sge_fl_buffer_size[16]; /* free list buffer sizes */
u32 sge_ingress_rx_threshold; /* RX counter interrupt threshold[4] */
+ u32 sge_congestion_control; /* congestion thresholds, etc. */
u32 sge_timer_value_0_and_1; /* interrupt coalescing timer values */
u32 sge_timer_value_2_and_3;
u32 sge_timer_value_4_and_5;
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
index 570b895..fae0c95 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
@@ -468,12 +468,38 @@
sge_params->sge_timer_value_2_and_3 = vals[5];
sge_params->sge_timer_value_4_and_5 = vals[6];
+ /* T4 uses a single control field to specify both the PCIe Padding and
+ * Packing Boundary. T5 introduced the ability to specify these
+ * separately with the Padding Boundary in SGE_CONTROL and and Packing
+ * Boundary in SGE_CONTROL2. So for T5 and later we need to grab
+ * SGE_CONTROL in order to determine how ingress packet data will be
+ * laid out in Packed Buffer Mode. Unfortunately, older versions of
+ * the firmware won't let us retrieve SGE_CONTROL2 so if we get a
+ * failure grabbing it we throw an error since we can't figure out the
+ * right value.
+ */
+ if (!is_t4(adapter->params.chip)) {
+ params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
+ FW_PARAMS_PARAM_XYZ(SGE_CONTROL2_A));
+ v = t4vf_query_params(adapter, 1, params, vals);
+ if (v != FW_SUCCESS) {
+ dev_err(adapter->pdev_dev,
+ "Unable to get SGE Control2; "
+ "probably old firmware.\n");
+ return v;
+ }
+ sge_params->sge_control2 = vals[0];
+ }
+
params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
FW_PARAMS_PARAM_XYZ(SGE_INGRESS_RX_THRESHOLD));
- v = t4vf_query_params(adapter, 1, params, vals);
+ params[1] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
+ FW_PARAMS_PARAM_XYZ(SGE_CONM_CTRL));
+ v = t4vf_query_params(adapter, 2, params, vals);
if (v)
return v;
sge_params->sge_ingress_rx_threshold = vals[0];
+ sge_params->sge_congestion_control = vals[1];
return 0;
}